OLE DB Or ODBC Error: Login Failed For User 'NT AUTHORITYLOCAL SERVICE'
Hi,
I need help with a problem: When trying to process a analysis services project, I receive the following error message -
OLE DB error: OLE DB or ODBC error: Login failed for user 'NT AUTHORITYLOCAL SERVICE'.; 28000; Cannot open database "DocumentDB" requested by the login. The login failed.; 42000.
I am using the service account for impersonation for the datasource. One suggestion I received from the data-access forum was to grant privileges to the local service for the database. I am not clear about the procedure to do that. Can someone please guide me through this? I am posting this question in this forum since this is a authentication/privilege issue.
- Sanchet
View Complete Forum Thread with Replies
Related Forum Messages:
Login Failed For User 'NT AUTHORITYLOCAL SERVICE'
I just installed the Issue Tracker using .net 1.1 (on my computer). When I try to log in via the login page, I get: Login failed for user 'NT AUTHORITYLOCAL SERVICE' Here is my stack trace info: SqlException: Login failed for user 'NT AUTHORITYLOCAL SERVICE'.] System.Data.SqlClient.ConnectionPool.CreateConnection() +402 System.Data.SqlClient.ConnectionPool.UserCreateRequest() +151 System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) +386 System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) +372 System.Data.SqlClient.SqlConnection.Open() +384 ASPNET.StarterKit.IssueTracker.DataAccessLayer.SQLDataAccessLayer.ExecuteScalarCmd(SqlCommand sqlCmd) +129 ASPNET.StarterKit.IssueTracker.DataAccessLayer.SQLDataAccessLayer.Authenticate(String username, String password) +184 ASPNET.StarterKit.IssueTracker.BusinessLogicLayer.ITUser.Authenticate(String username, String password) +44 ASPNET.StarterKit.IssueTracker.DesktopDefault.Login(Object s, EventArgs e) +84 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +108 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +57 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +18 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain() +1292 I have added everyone, asp.net, local service, network service - all full control on the entire folder. Restarted IIS - still can't log in. Please help.
View Replies !
Old Problem, But... Cannot Open User Default Database. Login Failed. Login Failed For User 'NT AUTHORITYNETWORK SERVICE'.
I didn't use SQL Express before, now I am trying to use it. I thinkk it is convinient if you just want to copy db files to user's machine. like this <add name="schsecurity" connectionString="Data Source=.SQLExpress;Integrated Security=true;User Instance=True;AttachDBFilename=|DataDirectory|aspnetdb.mdf" /> as long as user has sql express installed, he should be able to use the db once he copy the file aspnetdb.mdf over. but when I tried it, I got Cannot open user default database. Login failed. Login failed for user 'NT AUTHORITYNETWORK SERVICE'. it looks simple, SQL express can not verify user 'NT AUTHORITYNETWORK SERVICE' so I connect SQL express with SQL server management studio, and add the user into login of the SQL express and set the user as sysadmin. But I still get the error. Any idea? thanks!
View Replies !
Error : &&"cannot Open User Default Database. Login Failed. Login Failed For User 'server/user'
i'm using the Enterpirse library logger to write logs into a database. When choosing connection string i choose the database i want in the "connection properties" dialog box and push 'Test connection' button. everything goes well. then i open the SQL Server Management studio express and connect to the databse to check some things, from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error: "cannot open user default database. Login failed. login failed for user My'server/MyuserName'" even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore.... it only work when i restart the computer. why ?
View Replies !
Error String: [Microsoft][ODBC SQL Server Driver][SQL Server]Login Failed For User '(null)'. Reason: Not Associated With A Trus
Hi all This Job ran yester day fine,to day It got failed with this error any suggestion to troubleshoot problem is appreciated. DTSRun OnError: DTSStep_DTSTransferObjectsTask_1, Error = -2147203052 (80044814) Error string: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Error source: Microsoft SQL-DMO (ODBC SQLState: 28000) Help file: SQLDMO80.hlp Help context: 1131 Error Detail Records: Error: 0 (0); Provider Error: 0 (0) Error string: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Error source: Microsoft SQL-DMO (ODBC SQLState: 28000) Help file: SQLDMO80.hlp Help context: 1131 DTSRun OnFinish: DTSStep_DTSTransferObjectsTask_1 DTSRun: Package execution complete.
View Replies !
Cannot Open User Default Database. Login Failed For User 'NT AUTHORITYNETWORK SERVICE'
Cannot open user default database. Login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. I have This Error When i try to log into My online web site, i have no idea how to fix it,one day it was working and the next it wasnt, is there any way to find out what database the default is and if it's either incorrect or not present change the web.config in a way that will make my system work. i have the NT Authority/Network Service in my Server Properties Permissions, its given the type login and is granted Connect SQL by sa i have 3 colder copies of the web site on my server my question is, how would i use of of these to restore the original site configuration is there a way to restore the original configuration to undo whatever it is i've done to break the system ChrisStressed
View Replies !
Error: Cannot Open Database Requested In Login 'projectAllocations'. Login Fails. Login Failed For User 'sa'.
Hi, Im getting this error when attempting to retrieve data from an sql database. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open database requested in login 'projectAllocations'. Login fails. Login failed for user 'sa'. Source Error: Line 13: objConn = New SqlConnection( "Server=LAB303-066NETSDK; Database=projectAllocations; User ID=sa;Password=mypassword") Line 14: objCmd = New SqlCommand("SELECT * FROM project_descriptions", objConn) Line 15: objConn.Open() Line 16: objRdr = objCmd.ExecuteReader() Line 17: While objRdr.Read() Source File: C:finalyearproject2sample.aspx Line: 15 Please Help!! Im a beginner to this, so if anyone knows the answer, take baby steps when explaining. Thanks
View Replies !
Login Failed For User 'NT AUTHORITYNETWORK SERVICE'
Hi All. I'm new to SQL 2005 server so please bare with me. I just recently setup SQL 2005 on a server in my network and created my first database table. As a test I then create a default.aspx page to access my database/table and load some information into a datagrid. When I push the page up to my server and try to view it in a browser I'm getting the following error: Login Failed for user 'NT AUTHORITYNETWORK SERVICE'A server error occured on the current command. Based on the error I assumed it was a permissions issue. So I went back to the server and openned up 'SQL Server Management Studio', opened up the 'database' folder and right-click my database and choose 'Properties' Under 'Properties' I selected the 'Permissions' and then the 'View Server Permissions' link. From the list I select 'NT AUTHORITYNETWORK SERVICE' user. Once selected I see a list of permissions, such as: - Administer bulk operations- Alter any connection- Alter any credential- Alter any database Does anyone know what permission I need to select in order to allow my aspx page to work?
View Replies !
Login Failed For User 'NT AUTHORITYNETWORK SERVICE'
i face the a problem, Login failed for user 'NT AUTHORITYNETWORK SERVICE'. i already add login permission in SQL management for 'NT AUTHORITYNETWORK SERVICE'. it's not working. The default database shows 'master' as default database. do i need to change to aspnetdb.mdf database?.
View Replies !
Login Failed For User 'NT AUTHORITYNETWORK SERVICE'.
Login failed for user 'NT AUTHORITYNETWORK SERVICE'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'NT AUTHORITYNETWORK SERVICE'.Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SqlException (0x80131904): Login failed for user 'NT AUTHORITYNETWORK SERVICE'.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +172 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357 System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83 System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1744 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +13 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +150 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +68 System.Web.UI.WebControls.GridView.DataBind() +5 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +61 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +67 System.Web.UI.Control.EnsureChildControls() +97 System.Web.UI.Control.PreRenderRecursiveInternal() +50 System.Web.UI.Control.PreRenderRecursiveInternal() +193 System.Web.UI.Control.PreRenderRecursiveInternal() +193 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +6490 thats my error and my connection is <connectionStrings> <add name="hayatConnectionString" connectionString="Data Source=laptop;Integrated Security=SSPI;Pooling=False;Initial Catalog=hayat" providerName="System.Data.SqlClient"/></connectionStrings> i test the Integrated Security= with true false and sspi and i can't access to database my windows vista and iis7
View Replies !
Login Failed For User 'NT AUTHORITYNETWORK SERVICE'.
OK I know that this topic seems like it has been beaten to death in the forums but I'm still unable to figure out why I'm getting this error. I've added the NT AuthorityNetwork Service to the SQL server and the database that I want to connect to. I've made it the db_owner. Still got the error. I added myself (the account I login with into windows) with the same options as with the NT Authority. Still got error. I'm runnin SQL Server 2005 on my local machine as well as IIS 6. I know that my web.config is correct because I only started getting this error after I reinstalled SQL Server and IIS. I've really run out of ideas of why this is happening. I'm assuming from the error message that it's at the database level but I just don't know where. Here are exerts from my web.config that may help:<connectionStrings> <remove name="database"/><add name="database" connectionString="Data Source=(local);Initial Catalog=TheBugZoo;Integrated Security=True;" providerName="System.Data.SqlClient"/> </connectionStrings><roleManager enabled="true" cacheRolesInCookie="true" cookieName="TBZROLES" defaultProvider="TBZ_RoleProvider"> <providers><add connectionStringName="database" applicationName="/" name="TBZ_RoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> </providers> </roleManager>
View Replies !
Login Failed For User 'NT AUTHORITYNETWORK SERVICE'
I cant seem to deploy a DB to my server. Can anyone actually help with this? I have been goint through lots of different things to get it to work... So far I have added the network service account to SQL Express 2005 through the express managment console I have also given NETWORK SERVICE explicit permissions on the database files themselves. It works great on my dev box. I'm able to login and access my secondary DB but when i try to push the site to my server this is what happens. Any help on this is great -- if you need me to post any more of my code -- no problem This is my exact error: SqlException (0x80131904): Cannot open user default database. Login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'.] My web.config file looks like: <!-- Note: As an alternative to hand editing this file you can use the web admin tool to configure settings for your application. Use the Website->Asp.Net Configuration option in Visual Studio. A full list of settings and comments can be found in machine.config.comments usually located in WindowsMicrosoft.NetFrameworkv2.xConfig --> <configuration> <appSettings/> <connectionStrings> <add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|igx-ma.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. Visual Basic options: Set strict="true" to disallow all data type conversions where data loss can occur. Set explicit="true" to force declaration of all variables. --> <identity impersonate="true"/> <authentication mode="Forms" /> <authorization> <deny users="?" /> <allow users="*" /> </authorization> <roleManager enabled="true" /> <compilation debug="true" strict="false" explicit="true"/> <pages> <namespaces> <clear/> <add namespace="System"/> <add namespace="System.Collections"/> <add namespace="System.Collections.Specialized"/> <add namespace="System.Configuration"/> <add namespace="System.Text"/> <add namespace="System.Text.RegularExpressions"/> <add namespace="System.Web"/> <add namespace="System.Web.Caching"/> <add namespace="System.Web.SessionState"/> <add namespace="System.Web.Security"/> <add namespace="System.Web.Profile"/> <add namespace="System.Web.UI"/> <add namespace="System.Web.UI.WebControls"/> <add namespace="System.Web.UI.WebControls.WebParts"/> <add namespace="System.Web.UI.HtmlControls"/> </namespaces> </pages> <!-- The <authentication> section enables configuration of the security authentication mode used by ASP.NET to identify an incoming user. --> <!-- The <customErrors> section enables configuration of what to do if/when an unhandled error occurs during the execution of a request. Specifically, it enables developers to configure html error pages to be displayed in place of a error stack trace. <customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm"> <error statusCode="403" redirect="NoAccess.htm" /> <error statusCode="404" redirect="FileNotFound.htm" /> </customErrors> --> <membership> <providers> <remove name="AspNetSqlMembershipProvider"/> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" applicationName="/" requiresUniqueEmail="true" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="1" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" passwordStrengthRegularExpression="" /> </providers> </membership> </system.web> </configuration>
View Replies !
Login Failed For User 'NT AUTHORITYNETWORK SERVICE'.
Hi! I developed one web application, in that i created some users and roles. When its running from my system, users are getting logged. But the problem is - when I hosted this site on my domain server its giving error like - " System.Data.SqlClient.SqlException: Cannot open user default database. Login failed. Login failed for user 'NT AUTHORITYNETWORK SERVICE' ". Its giving this error when i am trying to login. Is there any thing i am missing with Sqlserver. Please help me! thanks in advance!
View Replies !
Login Failed For User 'NT AUTHORITYNETWORK SERVICE'.
Login failed for user 'NT AUTHORITYNETWORK SERVICE'. I've just installed Windows Server 2003 and can't get past this. I've changed the <processModel> userName to SYSTEM, I've added ASPNET to the Admin group, other tweaks with reboot but still can get it to work. I'm not sure what the NT AUTHORITY domain is. Anyone experience this? Thanks
View Replies !
Login Failed For User 'NT AUTHORITYNETWORK SERVICE'
Mr :I have proplem with Visual stdio 2003 and Windows2003Enterprise Server , when I developed web applicationusing ASP.Net (VB) that establish connection to SQL Serverdatabase the following error appeared.Server Error in '/WebApplication1' Application.Login failed for user 'NT AUTHORITYNETWORK SERVICE'
View Replies !
Login Failed For User 'NT AUTHORITYNETWORK SERVICE'
I have built a web page in visual web developer express and I moved it over to use IIS. I gave NT AUTHORITYNETWORK SERVICE read and write permissions to the folder and included it in my IIS virtual folder. I can see the login page just fine. I can create a user just fine. I can even access the forgot password page just fine. But if I try to login in I get this stack trace. I can't figure out what more I need to do for NT AUTHORITYNETWORK SERVICE. Can any one help.Server Error in '/' Application. Cannot open user default database. Login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'.Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SqlException (0x80131904): Cannot open user default database. Login failed. Login failed for user 'NT AUTHORITYNETWORK SERVICE'.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735043 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
View Replies !
Login Failed For User 'NT AUTHORITYNETWORK SERVICE'.
I've tried to use Windows authentication to connect to database in MS SQL Server 2000, my connection string like below: "server=(local);Initial Catalog=myDatabase;Trusted_Connection=yes" when I run my code, there is an error occur with below message: Login failed for user 'NT AUTHORITYNETWORK SERVICE' My SQL Server is configured as Window authentication. I can't resolve this problem. Please whow me how to do! Thank you very much!
View Replies !
Login Failed For User 'NT AUTHORITYNETWORK SERVICE'.
I´m working with vs.net 2003; windows 2003 and sqlserver 2000. I´m trying do use windows authenticationin IIS i have integrated windows authentication checkedis sql server i have sql server and windows authenticationin contacts database i have the ASP.NET user error occurs: Dim strConnstring As String = "data source=(local);initial catalog=Contacts;integrated security=SSPI;persist security info=False" works fine: Dim strConnstring As String = "data source=(local);initial catalog=Contacts;user id=sa;password=secret" I even try to drag to table from server explorer to create the sqlconnection and dataadpter and dataset, and the problem is the same. What to do ? Thank you ALL
View Replies !
SQL Login Failed For User 'NT AUTHORITYNETWORK SERVICE'
Please help this sql novice. I use Window server 2003 and Sql server 2000. both run on the same machine. The machine is behind a router. Port 1433 is forwarded. ------------------------loginfailed.aspx go as follows--------------------- <%@ Page Language="vb" runat="server" %> <%@ import Namespace="System.Data" %> <%@ import Namespace="System.Data.SqlClient" %> <script runat="server"> Sub Page_Load() Dim myConnection As New SqlConnection() myConnection.ConnectionString = "server=localhost; database=pubs;_ Persist Security info=False; Integrated Security=SSPI; Connect Timeout=30" myConnection.Open() End Sub </script> ------------------------------------------------------------------------------ That program generates error message: Login failed for user 'NT AUTHORITYNETWORK SERVICE'. However, OleDB works fine. relly dont know what has gone wrong. These are the debugging message: [SqlException: Login failed for user 'NT AUTHORITYNETWORK SERVICE'.] System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) +484 System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) +372 System.Data.SqlClient.SqlConnection.Open() +384 ASP.loginfailed_aspx.Page_Load() in D:loginfailed.aspx:9 System.Web.Util.ArglessEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +10 System.Web.UI.Control.OnLoad(EventArgs e) +67 System.Web.UI.Control.LoadRecursive() +35 System.Web.UI.Page.ProcessRequestMain() +750
View Replies !
Login Failed For User 'NT AUTHORITYNETWORK SERVICE'
Hi all, QuickStart samples and applications coming with .NET Framework SDK include "A Personalized Portal", "An E-Commerce Storefront", etc. are working properly with no problem. I downloaded and installed IBuySpy Store and Portal from www.asp.net. While running default.aspx of these samples the following error occurs: Server Error in '/StoreCS' Application. -------------------------------------------------------------------------------- Login failed for user 'NT AUTHORITYNETWORK SERVICE'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'NT AUTHORITYNETWORK SERVICE'.
View Replies !
Login Failed For User 'NT AUTHORITYNETWORK SERVICE'
Any help would be very very much appreciated as I am about 15 hours into this :( Background is a development system with ASP.NET 2.0 and SQL express 2005. The server is SQL 2005 standard edition. Any ASPX pages that connect to a database results in errors. I have 2 identical servers with Windows server 2003, one has SQL Express and the other has SQL Server 2005 standard. that is the only difference between these systems. The scripts that work seamlessly when uploaded to the SQL Express server dont work on the SQL Server 2005 My connection string is <remove name="LocalSqlServer" /> <add name="LocalSqlServer" connectionString="Datasource=servername;Integrated Security=SSPI;initial catalog=C:INETPUBWWWROOT estapp_dataaspnet.MDF;" providerName="System.Data.SqlClient" /> two interesting tidbits 1.) No matter what the initial catalog is pointing to, I get the same error. EVEN if the database doesnt exist Cannot open database "C:INETPUBWWWROOT estapp_dataaspnwet.MDF" requested by the login. The login failed. Login failed for user 'NT AUTHORITYNETWORK SERVICE'. 2.) second interesting thing is this, if I change the datasource to "MSSQLSERVER" which is the instance name of SQL 2005. the error changes to An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I have reinstalled SQL server 2005 I have verified that under SQL Server 2005 Surface Area Configuration that remote connections has Both TCP and Named Pipes enabled I have verified that under the Network Configuration that the protocols for TCP/IP and Named pipes are enabled. I have tried atleast 20 different variations of Connectionstrings I have ran aspnet_regsql against the database I have verified that the SQL Server Browser is started I have verified that the TCP/IP is set in Network Configuration to default port 1433 I have gave all authentication rights to Network Service and ASPNET accounts for testing against both the MASTER and ASPNET databases using Management Studio and attaching the Database I have created a custom SQL account with access to the database in question and added the username password syntax to the connectionstring and get the same login failed message. If anyone can give any insight that would be MUCH appreciated!! thanks in advance.
View Replies !
Login Failed For User 'NT AUTHORITYNETWORK SERVICE'
I have: (1) SQL 2005 on a member server, Windows Authentication (2) I'm using Visual Studio.Net 2005 on my Windows XP sp2 work station. (3) From my machine, within my development application, I have no problem accessing the Data in the SQL server. (4) I Receive the Login Failed error after I copy my project to the Test Web Server (Same machine that houses SQL) and test from either my machine or from the host server. More details of the error message are: Login failed for user 'NT AUTHORITYNETWORK SERVICE'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'NT AUTHORITYNETWORK SERVICE'. Source Error: Line 33: DA = New SqlDataAdapter(sSql, CONN_STRING) Line 34: DS = New DataSet Line 35: DA.Fill(DS) Line 36: Line 37: Session("NameInquiry_DS") = DS Source File: C:InetpubwwwrootameinquiryNameInquiry.aspx.vb Line: 35 The finished product is to be an Intranet site only; accessible by employees within our own private network. The SQL is a new install with only test data. What have I missed that is causing the permission problem? The event viewer shows a nonauthenticated user is causing the problem. But, how do I correct this?
View Replies !
Login Failed For User NT Authority
Etwork Service
Hi,In vs.net 2003 I created a webapplication and by toolbox/data/SqlDataAdapter I created a connection andthe adapter. I added a dataset and all went OK.In created another webapplication, did the same procedure and I got the error above mentioned. How come ?Help is appreciated, Ger.
View Replies !
Login Failed For User 'nt Authority
Etwork Service'...?
i need some advise with this error.i created a new web project form, added a dataadapter, connection and dataset to a webform. When creating the connection, no errors. Used the query builder to select the necessary tables, also no errors. i competed and built the project, loaded it in a web browser and bang, login failed for user NT AUTHORITYNETWORK SERVICE. it happens at both the workstation and server.system.data.sqlexception: login failed for user 'nt authorityetwork service'.my dev box is an xp pro workstation. the project is stored on a 2003 web server (unc share). i'm working on an intranet project using visual studio 2003 to display data from sql server db. i've set and reversed a number of security settings in sql and iis trying to correct this error, i'm just not getting it. also, prob not closing the connection when this error occurs either; using SqlDataAdapter1, SqlConnection1 and DataSet11any suggestions are greatly appreciated.(webform1.aspx.vb)Imports System.DataImports System.Data.SqlClient Public Class WebForm1 Inherits System.Web.UI.Page #Region " Web Form Designer Generated Code " 'This call is required by the Web Form Designer. <System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent() Dim configurationAppSettings As System.Configuration.AppSettingsReader = New System.Configuration.AppSettingsReader Me.SqlDataAdapter1 = New System.Data.SqlClient.SqlDataAdapter Me.SqlSelectCommand1 = New System.Data.SqlClient.SqlCommand Me.SqlConnection1 = New System.Data.SqlClient.SqlConnection Me.DataSet11 = New WebApplication_01.DataSet1 CType(Me.DataSet11, System.ComponentModel.ISupportInitialize).BeginInit() ' 'SqlDataAdapter1 ' Me.SqlDataAdapter1.SelectCommand = Me.SqlSelectCommand1 Me.SqlDataAdapter1.TableMappings.AddRange(New System.Data.Common.DataTableMapping() {New System.Data.Common.DataTableMapping("Table", "ORDERS", New System.Data.Common.DataColumnMapping() {New System.Data.Common.DataColumnMapping("Record#", "Record#"), New System.Data.Common.DataColumnMapping("Order#", "Order#"), New System.Data.Common.DataColumnMapping("DateOpened", "DateOpened"), New System.Data.Common.DataColumnMapping("DriverName", "DriverName"), New System.Data.Common.DataColumnMapping("Reference", "Reference"), New System.Data.Common.DataColumnMapping("CustomerName", "CustomerName"), New System.Data.Common.DataColumnMapping("StreetAddress", "StreetAddress"), New System.Data.Common.DataColumnMapping("City", "City"), New System.Data.Common.DataColumnMapping("State", "State"), New System.Data.Common.DataColumnMapping("Zip", "Zip"), New System.Data.Common.DataColumnMapping("OrderStatus", "OrderStatus"), New System.Data.Common.DataColumnMapping("OrderNotes", "OrderNotes"), New System.Data.Common.DataColumnMapping("OrderDueBy", "OrderDueBy"), New System.Data.Common.DataColumnMapping("ServiceName", "ServiceName"), New System.Data.Common.DataColumnMapping("LastModified", "LastModified")})}) ' 'SqlSelectCommand1 ' Me.SqlSelectCommand1.CommandText = "SELECT ORDERS.RECID AS Record#, ORDERS.ORDERNUM AS Order#, ORDERS.ORDERDATE AS Da" & _ "teOpened, Users.Name AS DriverName, ORDERS.REFERENCE AS Reference, ORDERS.CLIENT" & _ " AS CustomerName, ORDERS.ADDRESS AS StreetAddress, ORDERS.CITY AS City, ORDERS.S" & _ "TATE AS State, ORDERS.ZIPCODE AS Zip, ORDERS.STATUSID AS OrderStatus, ORDERS.NOT" & _ "ES AS OrderNotes, ORDERS.DUEBY AS OrderDueBy, SERVICES.NAME AS ServiceName, ORDE" & _ "RS.ModifyTime AS LastModified FROM ORDERS INNER JOIN Users ON ORDERS.USERID = Us" & _ "ers.UserID INNER JOIN SERVICES ON ORDERS.SERVICEID = SERVICES.ID WHERE (ORDERS.S" & _ "TATUSID = 4)" Me.SqlSelectCommand1.Connection = Me.SqlConnection1 ' 'SqlConnection1 ' Me.SqlConnection1.ConnectionString = CType(configurationAppSettings.GetValue("SqlConnection1.ConnectionString", GetType(System.String)), String) ' 'DataSet11 ' Me.DataSet11.DataSetName = "DataSet1" Me.DataSet11.Locale = New System.Globalization.CultureInfo("en-US") CType(Me.DataSet11, System.ComponentModel.ISupportInitialize).EndInit() End Sub Protected WithEvents SqlDataAdapter1 As System.Data.SqlClient.SqlDataAdapter Protected WithEvents SqlConnection1 As System.Data.SqlClient.SqlConnection Protected WithEvents DataSet11 As WebApplication_01.DataSet1 Protected WithEvents SqlSelectCommand1 As System.Data.SqlClient.SqlCommand Protected WithEvents DataGrid1 As System.Web.UI.WebControls.DataGrid 'NOTE: The following placeholder declaration is required by the Web Form Designer. 'Do not delete or move it. Private designerPlaceholderDeclaration As System.Object Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init 'CODEGEN: This method call is required by the Web Form Designer 'Do not modify it using the code editor. InitializeComponent() End Sub #End Region Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 'Put user code to initialize the page here SqlDataAdapter1.Fill(DataSet11) DataGrid1.DataBind() End Sub Private Sub DataGrid1_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles DataGrid1.SelectedIndexChanged End Sub Private Sub SqlDataAdapter1_RowUpdated(ByVal sender As System.Object, ByVal e As System.Data.SqlClient.SqlRowUpdatedEventArgs) Handles SqlDataAdapter1.RowUpdated End Sub Private Sub SqlConnection1_InfoMessage(ByVal sender As System.Object, ByVal e As System.Data.SqlClient.SqlInfoMessageEventArgs) Handles SqlConnection1.InfoMessage End SubEnd Class(webform1.aspx)<%@ Page Language="vb" AutoEventWireup="false" Codebehind="WebForm1.aspx.vb" Inherits="WebApplication_01.WebForm1"%><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><HTML> <HEAD> <title>WebForm1</title> <meta name="GENERATOR" content="Microsoft Visual Studio .NET 7.1"> <meta name="CODE_LANGUAGE" content="Visual Basic .NET 7.1"> <meta name="vs_defaultClientScript" content="JavaScript"> <meta name="vs_targetSchema" content="http://schemas.microsoft.com/intellisense/ie5"> </HEAD> <body MS_POSITIONING="GridLayout"> <form id="Form1" method="post" runat="server"> <asp:DataGrid id=DataGrid1 style="Z-INDEX: 101; LEFT: 4px; POSITION: absolute; TOP: 4px" runat="server" DataSource="<%# DataSet11 %>" DataKeyField="Order#" DataMember="ORDERS"> <Columns> <asp:BoundColumn DataField="Record#" HeaderText="Record#"></asp:BoundColumn> <asp:BoundColumn DataField="Order#" HeaderText="Order#"></asp:BoundColumn> <asp:BoundColumn DataField="DateOpened" HeaderText="Date Opened"></asp:BoundColumn> <asp:BoundColumn DataField="DriverName" HeaderText="Driver Name"></asp:BoundColumn> <asp:BoundColumn DataField="Reference" HeaderText="Reference"></asp:BoundColumn> <asp:BoundColumn DataField="CustomerName" HeaderText="Customer Name"></asp:BoundColumn> <asp:BoundColumn DataField="StreetAddress" HeaderText="Street Address"></asp:BoundColumn> <asp:BoundColumn DataField="City" HeaderText="City"></asp:BoundColumn> <asp:BoundColumn DataField="State" HeaderText="State"></asp:BoundColumn> <asp:BoundColumn DataField="Zip" HeaderText="Zip"></asp:BoundColumn> <asp:BoundColumn DataField="OrderNotes" HeaderText="Order Notes"></asp:BoundColumn> <asp:BoundColumn DataField="OrderDueBy" HeaderText="Due By"></asp:BoundColumn> <asp:BoundColumn DataField="ServiceName" HeaderText="Service Type"></asp:BoundColumn> <asp:BoundColumn DataField="LastModified" HeaderText="Last Modified"></asp:BoundColumn> </Columns> </asp:DataGrid> </form> </body></HTML>(web.config)<?xml version="1.0" encoding="utf-8"?><configuration> <system.web> <!-- DYNAMIC DEBUG COMPILATION Set compilation debug="true" to insert debugging symbols (.pdb information) into the compiled page. Because this creates a larger file that executes more slowly, you should set this value to true only when debugging and to false at all other times. For more information, refer to the documentation about debugging ASP.NET files. --> <compilation defaultLanguage="vb" debug="true" /> <!-- CUSTOM ERROR MESSAGES Set customErrors mode="On" or "RemoteOnly" to enable custom error messages, "Off" to disable. Add <error> tags for each of the errors you want to handle. "On" Always display custom (friendly) messages. "Off" Always display detailed ASP.NET error information. "RemoteOnly" Display custom (friendly) messages only to users not running on the local Web server. This setting is recommended for security purposes, so that you do not display application detail information to remote clients. --> <customErrors mode="RemoteOnly" /> <!-- AUTHENTICATION This section sets the authentication policies of the application. Possible modes are "Windows", "Forms", "Passport" and "None" "None" No authentication is performed. "Windows" IIS performs authentication (Basic, Digest, or Integrated Windows) according to its settings for the application. Anonymous access must be disabled in IIS. "Forms" You provide a custom form (Web page) for users to enter their credentials, and then you authenticate them in your application. A user credential token is stored in a cookie. "Passport" Authentication is performed via a centralized authentication service provided by Microsoft that offers a single logon and core profile services for member sites. --> <authentication mode="Windows" /> <!-- AUTHORIZATION This section sets the authorization policies of the application. You can allow or deny access to application resources by user or role. Wildcards: "*" mean everyone, "?" means anonymous (unauthenticated) users. --> <authorization> <allow users="*" /> <!-- Allow all users --> <!-- <allow users="[comma separated list of users]" roles="[comma separated list of roles]"/> <deny users="[comma separated list of users]" roles="[comma separated list of roles]"/> --> </authorization> <!-- APPLICATION-LEVEL TRACE LOGGING Application-level tracing enables trace log output for every page within an application. Set trace enabled="true" to enable application trace logging. If pageOutput="true", the trace information will be displayed at the bottom of each page. Otherwise, you can view the application trace log by browsing the "trace.axd" page from your web application root. --> <trace enabled="false" requestLimit="10" pageOutput="false" traceMode="SortByTime" localOnly="true" /> <!-- SESSION STATE SETTINGS By default ASP.NET uses cookies to identify which requests belong to a particular session. If cookies are not available, a session can be tracked by adding a session identifier to the URL. To disable cookies, set sessionState cookieless="true". --> <sessionState mode="InProc" stateConnectionString="tcpip=127.0.0.1:42424" sqlConnectionString="data source=127.0.0.1;Trusted_Connection=yes" cookieless="false" timeout="20" /> <!-- GLOBALIZATION This section sets the globalization settings of the application. --> <globalization requestEncoding="utf-8" responseEncoding="utf-8" /> </system.web> <appSettings> <!-- User application and configured property settings go here.--> <!-- Example: <add key="settingName" value="settingValue"/> --> <add key="SqlConnection1.ConnectionString" value="workstation id=MyID;packet size=4096;integrated security=SSPI;data source=MyServerName;persist security info=False;initial catalog=MySQLDataBaseName" /> </appSettings></configuration>
View Replies !
SqlException (0x80131904): Cannot Open User Default Database. Login Failed. Login Failed For User 'xxxASPNET'
Hey Microsoft: this affects development that will eventually sell a lot of seats on SharePoint Server 2007. If you guys and gals can't straighten out this mess, you can't expect custom solutions with custom web parts. So pay attention for your own good. Yes, SPS 2007 is what this is all about. I've created simpe web parts and deployed them, same VS 2005, but I need local development and debugging for more complex stuff. I'm really disappointed that you have no solution for this problem. I've seen other posts on this, but the result seems to be the same: if you fix it, it's by accident, not by design. 1. I created a blank ASP.NET web site 2. I added a web part manager 3. I added a web part zone I get the error described above. I have no idea why SQL Server settings are so screwed up. I've tried all the stuff in the other posts - security settings, command line installation, etc. None of those worked. The default template(s) don't copy anything into App_Data, nor create an empty folder. I don't know why that is. I have other web sites working just fine, but they use remote SQL databases, or local ones I created, and didn't need profile management (no forms authentication, no web parts, no web zones). I've also started out with a local database, using SQL Authentication, later moving it to a remote server, and never had any problems. The SQL Server developer edition and Express seem to work just fine. I can also debug stored procs when the .mdf is in App_Data. So the problem isn't one of connectivity. What would cause the default screw-up? This would seem to point from all directions to a problem with Visual Studio (2005)? The installation is defalt - perhaps some extras included (copy local), but nothing unusual. AJAX for ASP.net is installed, but not used in the above "default web site" trial. Likewise Syncfusion's tools, which work fine on other developer workstations at this same location, all of which are from the same image (purchased at the same time & imaged). That web parts work on other boxes, running all the same management tools (anti-virus, remote sys admin/sms etc.) makes none of those suspect. I think Microsoft needs to have a clean problem solution and publish it. SP1 certainly doesn't fix it. What's worse is the stupid, lame error message. "I can't open the default database". Well, what did you try? What do you think the default is? What settings are you using? Why is there no debugging information other than the usual worthless trace information showing it's all deep within the ProviderBase and SqlClient namespace code? How is that supposed to be helpful? If anyone has anything solid, not guesses, I'd like to know.
View Replies !
[298] SQLServer Error: 18452, Login Failed For User ''. The User Is Not Associated With A Trusted SQL Server Connection.
I received the above error yesterday and haven't been able to trace it to any job or process running. We haven't implemented any changes to the server in the past few months, and it doesn't look to be a user-established connection, since the Client IP Address of the SSPI handshake error is from the server itself. I logged this set of messages in SQL AgentServer error log: Date 10.03.2008 6:15:19 PM Log SQL Agent (Current - 10.03.2008 6:15:00 PM) Message [298] SQLServer Error: 18452, Login failed for user ''. The user is not associated with a trusted SQL Server connection. [SQLSTATE 28000] Date 10.03.2008 6:15:19 PM Log SQL Agent (Current - 10.03.2008 6:15:00 PM) Message [382] Logon to server '<server>' failed (ConnAttemptCachableOp) Date 10.03.2008 6:15:19 PM Log SQL Server (Current - 11.03.2008 2:32:00 PM) Source Logon Message Error: 17806, Severity: 20, State: 2. Date 10.03.2008 6:15:19 PM Log SQL Server (Current - 11.03.2008 2:32:00 PM) Source Logon Message SSPI handshake failed with error code 0x80090304 while establishing a connection with integrated security; the connection has been closed. [CLIENT: <IP Address>] Date 10.03.2008 6:15:19 PM Log SQL Server (Current - 11.03.2008 2:32:00 PM) Source Logon Message Error: 18452, Severity: 14, State: 1. Any help in explaining this would be greatly appreciated.
View Replies !
SQL Server ODBC Error 80004005: Login Failed
Hello, Until a few weeks ago I was very satisfied with my frontend/backend application Access 2003/SQL Server Express. Then I tried to build a website with Dreamweaver 8.0 and connect it to the Server DBase and everything went wrong. My problems are the following: In trying out the connection between DW and SQL I tried and changed some things with no result. I suddenly got a problem with the Norton firewall (wurms part) and with the named instance. At this very moment I sometimes have to switch from ".SQLEXPRESS" to "<machinename>SQLEXPRESS under Windows authentication. (provider: TCP provider, error 0 - no connection because of an active refuse of the goalcomputer)(MSQL Server error 10061). How can I solve this problem? The connection between DW (using ASP) and SQL Server always gives the same error: "ODBC drivers error 80004005 cannot open database x requested by login. The login failed". I tried everything I know (that isn't much by the way) but getting no connection between the two programs. When I test the connection and the recordset in DW everything is OK. Anyone any suggestions? The third problem is the most important. By doing things like (1) en (2) my frontend/backend database has become very very slow (it takes minutes to get a simple query done) and in fact doesnot function at all. When I look in de SQL part everything seems OK and I can open the tables quickly, but in Access the menus work but the forms and queries don't. This problem is very essential to me and I hope there is a solution? I hope I'll get some answers to the above questions. Thanks in advance. Rob
View Replies !
Cannot Open User Default Database. Login Failed. Login Failed For User
I Guys I am trying to create an application that writes data to a SQL database (studio express). The application works fine but as soon as I open the table with the SQL server management studio express the application does not work any more displaying the following message: €œCannot open user default database. Login failed. Login failed for user€¦€? If I siwtch off and on the computer the problem disappear till the table will be open with the database management studio express!!!!! How can I solve this annoying problem? Cheers
View Replies !
[Microsoft][ODBC SQL Server Driver][SQL Server]Login Failed For User 'ErrorLog'.
Hi, all recently, I use the following script(somebody else) to create a database on a remote server: the script is as follow: /*************************/ CREATE DATABASE [ErrorLog] GO Use ErrorLog CREATE TABLE [dbo].[Errors] ( [ID] [int] IDENTITY (1, 1) NOT NULL , [SessionID] [char] (12) NULL , [RequestMethod] [char] (5) NULL , [ServerPort] [char] (5) NULL , [HTTPS] [char] (3) NULL , [LocalAddr] [char] (15) NULL , [HostAddress] [char] (15) NULL , [UserAgent] [varchar] (255) NULL , [URL] [varchar] (400) NULL , [CustomerRefID] [varchar] (20) NULL , [FormData] [varchar] (2000), [AllHTTP] [varchar] (2000), [ErrASPCode] [char] (10) NULL , [ErrNumber] [char] (11) NULL , [ErrSource] [varchar] (255) NULL , [ErrCategory] [varchar] (50) NULL , [ErrFile] [varchar] (255) NULL , [ErrLine] [int] NULL , [ErrColumn] [int] NULL, [ErrDescription] [varchar] (1000) NULL , [ErrAspDescription] [varchar] (1000) NULL , [InsertDate] [datetime] NOT NULL ) ON [PRIMARY] --Create the user "ErrorLog" if not exists (select * from master.dbo.syslogins where loginname = N'ErrorLog') BEGIN declare @logindb nvarchar(132), @loginlang nvarchar(132) select @logindb = N'Navigator', @loginlang = N'us_english' if @logindb is null or not exists (select * from master.dbo.sysdatabases where name = @logindb) select @logindb = N'master' if @loginlang is null or (not exists (select * from master.dbo.syslanguages where name = @loginlang) and @loginlang <> N'us_english') select @loginlang = @@language exec sp_addlogin N'ErrorLog', 'secret', @logindb, @loginlang END GO if not exists (select * from dbo.sysusers where name = N'ErrorLog' and uid < 16382) EXEC sp_grantdbaccess N'ErrorLog', N'ErrorLog' GO Grant select, insert On Errors to ErrorLog /***************************/ in my *.asp program, I used the following string to connect to the database on the remote server. /******** con.open "dsn=ErrorLog;uid=ErrorLog;pwd=secret;" ********/ the following message comes up: /********/ Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E4D) [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'ErrorLog'. /*********/ what is the problem here? when I set up dsn ErrorLOG, I used "abc" userID and password "XXX" which is our server database administrator assigned to me. I tested connection in odbc, it is OK I just don't get, ther user ErrorLog already had login id and granted access to database errorlog. any clue, please help! Betty
View Replies !
ADO Error: Login Failed For User 'sa'
Need help! I just started using sql 7.0 to build DTS packages, and have successfully pulled data and transformed it from and AS400. The problem I'm having is that when I'm in the DTS designer and I choose Build Query in the Execute SQl properties window I get an error that says "An unexpected error happened:[MS Design Tools] - ADO error: Login failed for user 'sa'" This happens both on my windows 98 client and on the server itself. On the client when I try to edit the transformation I get ERROR Source:Microsoft OLEDB Provider for SQL Server ERROR Description:[DBMSSOCN] General network error. Any help/advice would be greatly appreciated, thanks!
View Replies !
37000[Microsoft][ODBC SQL Server Driver][SQL Server]Login Failed- User: Reason: Not Associated Wit
I have sql6.5 push replication to many remote subscribers. Need add one subscriber sql6.5 "XYZ"(all are in the same domain), got error of <<37000[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed- User: Reason: Not associated with a trusted SQL Server connection>>. I apply the same settings for "XYZ" sql executive like other subscribers with domainuserABC and assign it as the target server "XYZ" admin group. There is no problem in stop and restart the "XYZ" sql executive service. But at the time from the publisher to subscribe the XYZ, the task list show above error. MSSQLServer service logon with System Account option. This is a production issue, and I have spent around 2 days already. Thanks for help David
View Replies !
37000[Microsoft][ODBC SQL Server Driver][SQL Server]Login Failed- User: Reason: Not Associated With
I have sql6.5 push replication to many remote subscribers. Need add one subscriber sql6.5 "XYZ"(all are in the same domain), got error of <<37000[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed- User: Reason: Not associated with a trusted SQL Server connection>>. I apply the same settings for "XYZ" sql executive like other subscribers with domainuserABC and assign it as the target server "XYZ" admin group. There is no problem in stop and restart the "XYZ" sql executive service. But at the time from the publisher to subscribe the XYZ, the task list show above error. MSSQLServer service logon with System Account option. This is a production issue, and I have spent around 2 days already. Thanks for help David
View Replies !
[S0001][unixODBC][Easysoft][ODBC SQL Server Driver][SQL Server]Login Failed For User 'test1'
Hello, I am new to SQL Server, sorry for my ignorance !!! I have installed SQL Server 2005 Express on my desktop (Win 2000 Pro.) I have created a new database. I just created a new login/user (SQL Authentication) and when I try to login, it errors out: [S0001][unixODBC][Easysoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'test1' I believe the error is from SQL Server and not from ODBC driver. I am also only able to connect by using my own userid (the one that I am connected to my desktop): domainuserid, and then I am only able to connect to 'master' db: /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// /usr/local/etc>isql SQLSERVER_POS -v +---------------------------------------+ | Connected! | | | | sql-statement | | help [tablename] | | quit | | | +---------------------------------------+ SQL> use pcspos [S0001][unixODBC][Easysoft][ODBC SQL Server Driver][SQL Server]Could not locate entry in sysdatabases for database 'pcspos'. No entry found with that name. Make sure that the name is entered correctly. [ISQL]ERROR: Could not SQLExecute ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
View Replies !
Error 18456 Login Failed For User ""
I get this error when trying to connect. I'm using the sa id and password for all of my odbc connections. It fails when trying to connect to this one but it's ok on a couple of others I've set up with the same id etc. Where is this "" coming from and how to avoid it in the future? I've removed and recreated the connection to be sure that I didn't actually type that in as the id....hey it's monday...it could happen.
View Replies !
Cannot Open Database &"XXXX&" Requested By Login. The Login Failed. Login Failed For User 'xxx'
hi, so i have a new box and I'm trying to get my websites and SQL Server 2005 Standard Edition working on it, but the pages give me the following error when I try to load them: "Cannot Open Database "XXXX" requested by login. The login failed. Login failed for user 'xxx'" Everything seems exactly the same settings and user-wise from my old box to my new one, but nevertheless everything I've tried gives me the same error. I've tried creating new users in SQL Server and giving them appropriate permissions to my database. I've even tried just using the built in 'sa' account. Nothing seems to change the error, except when I give it the incorrect password then it just says 'login failed' This leads me to believe that i'm successfully logging into the SQL Server, but it doesn't want to give me access to the database I'm requesting access too. But "apparently" the account i'm using should have access to the database. If nothing else the 'sa' account should, but that didn't work either. I'm stumped. Any ideas?
View Replies !
Error 'Login Failed For User Sa', And The Backup Fails.
I have a ms sql database server backup maintainance.I have scheduled for backup daily at 11:00 pmhowever the backup doesnt take place.after lookin at the logs it shows me....Login failed for user 'sa'what does this mean ?and the backup doesnt take place at all ?I have windows + SQL server authentification enabled.plz suggest why this is happening ?
View Replies !
Help &"Login Failed For User 'NT AUTHORITYNETWORK SERVICE'&"
have built a web page in visual web developer express and I moved it over to use IIS. I gave NT AUTHORITYNETWORK SERVICE read and write permissions to the folder and included it in my IIS virtual folder. I can see the login page just fine. I can create a user just fine. I can even access the forgot password page just fine. But if I try to login in I get this stack trace. I can't figure out what more I need to do for NT AUTHORITYNETWORK SERVICE. Can any one help. Server Error in '/' Application. Cannot open user default database. Login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'.Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SqlException (0x80131904): Cannot open user default database. Login failed. Login failed for user 'NT AUTHORITYNETWORK SERVICE'.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735043 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
View Replies !
Cannot Open Database Requested In Login 'dbName'. Login Fails. Login Failed For User 'machineNameASPNET'
Been looking through the forums for a solution to this problem.I already tried granting access through statements such as:exec sp_grantloginaccess N1'machineNameASPNET'But they don't seem to work.. i vaguely remember seeing somewhere a DOS command line statement that grants access to the ASPNET_WP and that fixed my problem before on another computer.. but this is a new computer and i forgot to write down the command.Can anyone help explain and propose a solution to my problem. Many thanxs.
View Replies !
Login Failed For User '(null)' Error When Trying To Use Windows Authentication
I'm working on an ASP.NET project, and we're attempting to switch from SQL Server authentication to Windows authentication to connect to the database. It works fine locally when I debug in Visual Studio, but when it hits the web server, I get the error: "Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection." IIS has anonymous access disabled, and Integrated Windows Authentication is checked. The web.config file has: <authentication mode="Windows"/><identity impersonate="true"/> The database I'm attempting to access is on a different machine than IIS, and the connection string doesn't contain a username or password, and has "Trusted_Connection=Yes", and "Integrated Security=SSPI". From what I've been able to find online, I'm guessing the problem is due to IIS and SQL Server residing on different machines, but I'm not sure how to fix it. Any ideas?
View Replies !
Login Failed For User '(null)' Error When Opening A SQL Connection
Hello everyone. I'm very new to asp.net. I've been coding in vb.net for a while now (getting my associates degree in desktop application programming) and my boss wants all of my new applications to be web based now. Well, i decided to take some initiative on this and begin a new project for my department. This is a very small project. So far, everything is coming along alright (i found an eBook that's helped me quite a bit). Everything was cool until yesterday when i tried to connect to our sql server database. I get an error message stating: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Because i'm testing this on my system as well as the remote system which hosts the application, i can see the error message on the remote system. Here is the error it's giving me: Server Error in '/' Application. -------------------------------------------------------------------------------- Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection. Source Error: Line 57: sConnString = "Server=F11602A2120564OPS;Initial Catalog=OpsMonitor;User ID='public';Password=;Integrated Security=SSPI;"'Connection String Line 58: sConn = New SqlConnection(sConnString)'Initialize New Connection Line 59: sConn.Open'Open the connection Line 60: End Sub Line 61: </script> Source File: c:inetpubwwwrootatm_reporting.aspx Line: 59 Stack Trace: [SqlException: Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.] System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) +474 System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) +372 System.Data.SqlClient.SqlConnection.Open() +383 ASP.atm_reporting_aspx.OpenConn() in c:inetpubwwwrootatm_reporting.aspx:59 ASP.atm_reporting_aspx.Page_Load(Object Src, EventArgs E) in c:inetpubwwwrootatm_reporting.aspx:23 System.Web.UI.Control.OnLoad(EventArgs e) +67 System.Web.UI.Control.LoadRecursive() +35 System.Web.UI.Page.ProcessRequestMain() +731 You can see my SQL Connection string in there as well. Can someone please help me with this? I can post the code to the entire page as well if that would help. I'm developing this with Dreamweaver MX 2004 (i like dreamweaver MUCH better than visual studio, especially for web design/development). Thanks, Eric
View Replies !
Error 18456 State 11 -- Login Failed For Wrong User
A user is trying to connect to a server via windows authentication from SQL management studio on her desktop. The log file on the server gives: Login failed for user: domain1user1 Error : 18456, Severity: 14, State: 11 The strange thing is that the user in the error above is not the user she's trying to connect as (domain2user2, say). user2 can remote desktop to the server and log in there. I know this state implies "Valid login but server access failure". Has anyone run into this, and what more information would be useful to know? Thanks!
View Replies !
Error: 18456, Severity: 14, State: 16. Login Failed For User
Hello. I get this error when I try to connect to my SQL Server with JDBC: Excepcion en MyPool Pool.getNewConnection() [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Cannot open database "lituania" requested by the login. The login failed. And in the ERRORLOG I get: 2002-02-22 19:59:46.62 Logon Error: 18456, Severity: 14, State: 16. 2002-02-22 19:59:46.62 Logon Login failed for user 'frontend'. [CLIENT: 10.0.0.75] I found it is supossed to be a password mismatch: http://blogs.msdn.com/sql_protocols/archive/2006/02/21/536201.aspx but I checked the password is correct. Any ideas? Thank you in advance.
View Replies !
|
TRACKER
