&&"Package Failed Validation From The ExecutePackage Task&&" Error

I have an SSIS package which calls two other SSIS packages as part of it's control flow (using the Execute Package task). Both packages are stored in the same parent folder on the same server. The first child package runs successfully, the second does not. It ran fine for days until yesterday. Not sure what I might have done. I have tried to delay validation and recreate the connection. No go. Has anyone else run into this. I am running SQL 2005 RTM and VS 2005 RTM on XP Pro SP2. Any suggestions would be welcome.

View Replies


ADVERTISEMENT

Package Validation Error : The Package Designer Deletes The Code From Script Task.

While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:

Error at Validate File and  Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
 (Microsoft.DataTransformationServices.VsIntegration)

As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.

The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.

Please respond if anyone faced similar problem.

Thanks in advance!

Anand

PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>

View Replies View Related

ExecutePackage Task Global Variables

 

I'm trying to pass a global variable from a DTS package to the child packages that it calls using ExecutePackage tasks.  I have selected the child's global variable on the Inner Global Variable tab and I have selected the parent's global variable on the Outer Global Variable tab.  That doesn't work.  Whatever I type into the Value column of the Inner Global Variable tab gets passed to the child package.  How do I get the parent's global variable passed to the child package?  Do I need to set the value on the Inner Global Variable tab to some special word to make it look for the parent's global variable?  If I set it to nothing, nothing gets passed.
 
I have been able to make this work using an ActiveX Script task.  I can set the Inner Global Variable value of the Task object to the parent's global variable value, but that's not the clean solution I'm looking for.  There must be a simple way to do this because Microsoft's documentation brags about this feature, but they don't explain exactly how to do it.

 
Thanks
 
Steve
 

View Replies View Related

Ssis Package Failed Validation Even ProtectionLevel Set As EncryptSensitiveWithUserKey In Studio 2005

I am creator of this package. This package used to work fine both from studio and deployed on server. I come back this project, but can't get package even runing debug in studio with protectionLevel set as EncryptSensitiveWithUserKey or EncryptSensitiveWithPassword.

 

Does anyone see this problem before?

 

Here is my error message:

 

OnError,PC6071,SLCNTFJ3845,Get Address Parcel Route,{948E2EC3-4B1D-4465-B5B9-2DD95F91B1B3},{35E95EAA-0C59-4D79-A07E-6E876D603253},7/20/2007 9:54:27 AM,7/20/2007 9:54:27 AM,-1071611876,0x,The AcquireConnection method call to the connection manager "GEODB" failed with error code 0xC0202009.

OnError,PC6071,SLCNTFJ3845,Get Address Parcel Route,{948E2EC3-4B1D-4465-B5B9-2DD95F91B1B3},{35E95EAA-0C59-4D79-A07E-6E876D603253},7/20/2007 9:54:27 AM,7/20/2007 9:54:27 AM,-1073450985,0x,component "get parcel from Sub Struct" (75) failed validation and returned error code 0xC020801C.

OnError,PC6071,SLCNTFJ3845,Get Address Parcel Route,{948E2EC3-4B1D-4465-B5B9-2DD95F91B1B3},{35E95EAA-0C59-4D79-A07E-6E876D603253},7/20/2007 9:54:27 AM,7/20/2007 9:54:27 AM,-1073450996,0x,One or more component failed validation.

OnError,PC6071,SLCNTFJ3845,Get Address Parcel Route,{948E2EC3-4B1D-4465-B5B9-2DD95F91B1B3},{35E95EAA-0C59-4D79-A07E-6E876D603253},7/20/2007 9:54:27 AM,7/20/2007 9:54:27 AM,-1073594105,0x,There were errors during task validation.

 

 

Thanks!

 

 

View Replies View Related

'OLE DB Destination' Failed Validation Error

Hi,

 

I'm developing a SSIS package and am coming across this problem:

 

"Error at myTable [DTS.Pipeline]: component 'OLE DB Destination' (156) failed validation and returned error code 0xC020801C.

 

Here's the situation with my package.  It basically consists of a bunch of tasks to build a database and populate the tables from an Excel file.

 

The first task runs a SQL file to create all my DB tables, etc.  The next set of tasks import data from the Excel file into the tables.  All tasks have precedence constraints so that the SQL file will build the DB tables first.

 

Here's the problem.  Everything works perfectly if my database ALREADY exists.  The problem comes when the database does not exist.  It seems like the SSIS does some sort of schema validation on my dataflow tasks to ensure that everything is ok.

 

Is there any way to bypass this validation so that my SSIS will run ok without the DB already existing?  I know that everything WILL be ok because the ExecuteSQL task will create the structure for me.

 

I used to work with SQL 2000 DTS, and i never ran into this problem before.  Previously, i could run the DTS no problem, however, i just couldn't open the transformations if the DB didn't exist.

 

Thanks.

View Replies View Related

Task Failed To Validate &&"No Schema To Use In Validation Was Found.&&".

I have a package with an XML Task with OperationType = Validate.  The source is a string variable and the second operand is a file connection to a schema file.  The schema file <include>'s other schemas.  I run the package in debug mode in Visual Studio with no errors.  I exit Visual Studio.  Then I open Visual Studio again and run the package in debug mode like before and it fails in the xml task with error: "Task failed to validate "No schema to use in validation was found.".  I don't understand why it fails since no changes were made.  The strange thing is that if I click the File Connection Manager for the schema file and click Browse and then reselect the same schema file again then it runs OK.  Note that I have to exit Visual Studio and not just close the package in order to repro the error.  It seems like exiting Visual Studio frees some resource that is essential to the validation.  Reselecting the schema file in the Connection Manager seems to restore the resource. (SP1)

View Replies View Related

Execute Package Task Can't Continue When The Child Package Failed?

I use a execute package task to run a child package in which I run some sql task.

as the error handle I insert a script task and link a line from execute package task to script task

of course the line is red,

but I found when the child package failed, the execute package task turns red,it stopped

the script task  can't be run, I don't konw why?

 

View Replies View Related

Execute Package Task Error: Failed To Decrypt Protected XML Node &&"DTS:Password&&"

I have a package (PackageA) with an Execute Package Task that execs PackageB.  When I run PackageA I get this error on the Execute Package Task :

Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.

PackageB has 'EncryptSensitiveWithUserKey' ProtectionLevel.  I'm providing passwords in the dtsConfig so I'm guessing I should change it to 'DontSaveSensitive'?

Interestingly, PackageA also has 'EncryptSensitiveWithUserKey' ProtectionLevel, but I don't get an error about PackageA, just on the task that runs PackageB.

(SP1 is installed).

View Replies View Related

Implementing Transaction In SSIS Package - [Execute SQL Task] Error: Failed To Acquire Connection &&"&&<ConnectionName&&>&&".

I have a simple SSIS package with three "Execute SQL Tasks". I am using ADO.Net Connection to execute SPs on a DB server.

When I execute this package It works fine. So far so good.

Now, I need to implement transation on this package. And problem starts now onwards. When I try to execute package after setting TransationOption = Required for the Sequence container which contains all the tasks, I get following error.

[Execute SQL Task] Error: Failed to acquire connection "NYCDB0008.Export". Connection may not be configured correctly or you may not have the right permissions on this connection.

"NYCDB0008.Export" is the name of the ADO.Net connection. I have been hunting for any solution but all in vain. I have tried changing all DTC settings on the dev as well as Database server.

Please respond if anyone has any solution.

Thanks!

Anand

View Replies View Related

Package Validation Error

I have a package which takes a text file and imports data into a SQL table.  It returns the Package Validation Error:

Error at Data Flow Task [SQL Server Destination [1430]]: Failure inserting into the read-only column "ZipCode".

The column ZipCode in the sql table is a varchar(50) column.  I do not understand why it thinks the column is a read only column; if someone could shed some light on this I would greatly appreciate it.

 

Thanks!

GN

View Replies View Related

Package Validation Error - Please Help

 

So i have been using simple DTS packages for a few weeks with Visual Studio 2005. The only change i've made is that i've recently installed SP2 to Management Studio. Now everytime i try to run or create a DTS package i get the following error:
 
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Data Flow Task [DTS.Pipeline]: The LocaleID 127 is not installed on this system.
Error at Data Flow Task [DTS.Pipeline]: "component "Excel Source" (72)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
 (Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------

 
Anyone have the answer to this?

View Replies View Related

Package Validation Error

Package validation error
 

The script component is configured to pre-compile the script, but binary code is not found. Please visit the ide in script component editor by clicking design script button to cause binary code to be generated.
 
Error at data flow task [dts.pipleine].one or more component failed validation

View Replies View Related

Package Validation Error

Hi,

 

I am using Look-UP Transformation to do  ETL from a Flat file to a SQL Server Fact Table doing Keylookups from different Dimension Tables:

 

 

I am using two connections in the Connection manager, One for the FlatFile and one for the SQLServer Table..

 

 

While Executing the Package, I am getting the following error:

 

TITLE: Package Validation Error
------------------------------

Package Validation Error

------------------------------
ADDITIONAL INFORMATION:

Error at Data Flow Task [DTS.Pipeline]: The "runtime connection "OleDbConnection" (110)" in the connection manager collection, Connections, of "component "OLE DB Destination" (102)" does not have a value for the ID property. Verify that the ConnectionManagerID property of the runtime connection object has been set for the component.

Error at Data Flow Task [DTS.Pipeline]: component "OLE DB Destination" (102) failed validation and returned error code 0xC004801C.

Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.

Error at Data Flow Task: There were errors during task validation.

 (Microsoft.DataTransformationServices.VsIntegration)

------------------------------
BUTTONS:

OK
------------------------------

 

Can anyone help me ?

 

Thanks in Advance,

 

Sundar

 




 

View Replies View Related

Validation Error. Data Flow Task: OLE DB Source [94]:

Dear all,
 
I am trying to executed a packege so that it loads data from from the excel file to the SQL Server Server database.
When I execute it, it prompts the following error message and 1 warning
The excel file has three colums, Week, Item and Value
 
 
 

Error 4 Validation error. Data Flow Task: OLE DB Source [94]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80040E14.  An OLE DB record is available.  Source: "Microsoft OLE DB Provider for Oracle"  Hresult: 0x80040E37  Description: "ORA-00942: table or view does not exist ". Test - GET NW PERF 1.dtsx 0 0 

Warning

 
 

Warning 1 Validation warning. Data Flow Task: OLE DB Destination [36]: The external metadata column collection is out of synchronization with the data source columns. The column "DAY" needs to be added to the external metadata column collection.  The column "TCH_AVAIL" needs to be added to the external metadata column collection.  The column "PDROP" needs to be added to the external metadata column collection.  The column "P_HR" needs to be added to the external metadata column collection.  The column "SFAIL" needs to be added to the external metadata column collection.  The "external metadata column "VALUE" (90)" needs to be removed from the external metadata column collection.  The "external metadata column "ITEM" (89)" needs to be removed from the external metadata column collection. Not in use - GET NW STATS.dtsx 0 0 

Could someone give me a hand here.
 
Regards,
 
Ronald

View Replies View Related

How To Capture Package Validation Error?

 Hi,

 

I have a package which has 5 connection managers. One of the Connection Manager has incorrect server name, which results in Package Validation error. Which event handler should be used to run on such errors for OnError Event handler doesnt work @ all.

 

Thanks

Prasad

 

View Replies View Related

Trapping Package Validation Error

Hello,

 

I created a new SSIS Package.  I want to send an e-mail when an error occurrs.

 

I set the OnError event to send an e-mail. I then decided to test this so I dropped my input SQL table.  When I drop the import SQL table I get a Package Validation Error and I don't get my e-mail.

 

Am I making a mistake.  I want to always send an e-mail when an error occurrs in my SSIS package. 

By the way I did add an e-mail at the end of my SSIS package to verify my SMTP is working - it did.

 

Thanks,

 

Michael

 

View Replies View Related

Package Validation Error + Code 0xC004801C

Hi,

       I am learning to use SSIS for creating packages. I am getting the following error when I try to execute my package...

Package Validation Error

Error at Data Flow Task[DTS. Pipeline]:The "runtime connection "FlatFileConnection "(122)" in the connection manager collection, Connections, of component "Flat File Destination ("120") does not have a value for the ID property. Verify that the ConnectionManagerID property of the runtime connection object has been set for the component.

Error at Data Flow Task [DTS.Pipeline]: component "Flat File Destination" (120) failed validation and returned error code 0xC004801C.

Error at Data Flow Task[DTS.Pipeline]: One or more component failed validation.

Error at Data Flow Task: There were errors during task validation.

(Microsoft.DataTransformationServices.VsIntegration)

I'd appreciate if someone can help me with this. Do I need to change some settings?  Also, what does the number in brackets indicate, say in FlatFileConnection(122)? Is it valuable information while debugging?

Just to give an idea, my package is like this -

source FlatFile ->  Derived Column -> Lookup1 ->Lookup2 ->OLE DB destination(SQL server DB table)

                                Lookup1 and Lookup2 have error redirected to one flat file destination each.

Thanks in advance!

 

 

View Replies View Related

Package Validation Error In Custom PipelineComponent

Hi
 
I'm developing an PipelineComponent (ComponentType.Transform). When I try to execute this component, the following error is thrown:
 



Code Snippet
===================================
Package Validation Error (Package Validation Error)
===================================
Error at Data Flow Task [DTS.Pipeline]: Buffer Type 1 had a size of 0 bytes.
Error at Data Flow Task [DTS.Pipeline]: The buffer manager failed to create a new buffer type.
Error at Data Flow Task [DTS.Pipeline]: The Data Flow task cannot register a buffer type. The type had 50 columns and was for execution tree 0.
Error at Data Flow Task [DTS.Pipeline]: The layout failed validation.
Error at Data Flow Task: There were errors during task validation.
 (Microsoft.DataTransformationServices.VsIntegration)
------------------------------
Program Location:
   at Microsoft.DataTransformationServices.Project.DataTransformationsPackageDebugger.ValidateAndRunDebugger(Int32 flags, DataWarehouseProjectManager manager, IOutputWindow outputWindow, DataTransformationsProjectConfigurationOptions options)
   at Microsoft.DataTransformationServices.Project.DataTransformationsProjectDebugger.LaunchDtsPackage(Int32 launchOptions, ProjectItem startupProjItem, DataTransformationsProjectConfigurationOptions options)
   at Microsoft.DataTransformationServices.Project.DataTransformationsProjectDebugger.LaunchActivePackage(Int32 launchOptions)
   at Microsoft.DataTransformationServices.Project.DataTransformationsProjectDebugger.LaunchDtsPackage(Int32 launchOptions, DataTransformationsProjectConfigurationOptions options)
   at Microsoft.DataTransformationServices.Project.DataTransformationsProjectDebugger.Launch(Int32 launchOptions, DataTransformationsProjectConfigurationOptions options)
 
 


Can anyone help me, please? The "Integration Services Error and Message Reference" didn't help me much.
 
Thank you
 

Manuel Bauer
 
 

View Replies View Related

SSIS Job Fails For Package Containing Script Task With Error &"The Script Files Failed To Load.&"

I have developed a SQL Server 2005 Integration Services (SSIS) package that includes a Script Task on a 32-bit machine.  The PrecompileScriptIntoBinaryCode property is set to True.  After I build the package, the .dtsx file includes a <BinaryItem> element for that Task.  Package runs fine on the dev machine, both in BIDS and as SQL Server Agent job.
When I deploy the package to a 64-bit server, it runs fine when I execute the package ad hoc from SQL Server Management Studio.  However, when I schedule the package for execution as a SQL Server Agent job, the package fails with the message: "the script files failed to load."
I have reviewed posts on this error from late 2005, but the solutions don't work in this case.  Specifically:
1. The Precompile property is already set to True.
2. I have already verified that the script was compiled.
Any further suggestions?

View Replies View Related

Job Fails For Package Containing Script Task With Error &&"The Script Files Failed To Load.&&"

I have developed an SSIS package that includes a Script Task on a 32-bit machine.  The PrecompileScriptIntoBinaryCode property is set to True.  After I build the package, the .dtsx file includes a <BinaryItem> element for that Task.  Package runs fine on the dev machine, both in BIDS and as SQL Server Agent job.

When I deploy the package to a 64-bit server, it runs fine when I execute the package ad hoc from SQL Server Management Studio.  However, when I schedule the package for execution as a SQL Server Agent job, the package fails with the message: "the script files failed to load."

I have reviewed posts on this error from late 2005, but the solutions don't work in this case.  Specifically:

1. The Precompile property is already set to True.

2. I have already verified that the script was compiled.

Any further suggestions?

View Replies View Related

Execute Package Task Says Login Failed For 'sa'

Please help me with this error, I am desperate.

SSIS package "Clear.dtsx" starting.Error: 0xC0202009 at Clear, Connection manager "10.11.60.30.msdb.sa": An OLE DB error has occurred. Error code: 0x80040E4D.An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80040E4D  Description: "Login failed for user 'sa'.".Error: 0xC00220E4 at Execute Package Task: Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!..Task failed: Execute Package TaskWarning: 0x80019002 at Clear: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.SSIS package "Clear.dtsx" finished: Failure.

View Replies View Related

How To Programmatically Detect The Failed Task After Executing The Package

SSIS Experts,

      I am executing a child package programmatically  and want few lines of code to detect cause of the failure on the fly. One way will be to run the child package through dtexec command uility. But on the fly i will be assigning few values in Parent package variable to the child variables and finally run the child package. Since we cannot apply expressions or use precendence constraints in place, It seems that we are left with only choice to programmatically detect errors in tasks. In DTS, it was achieved this way:

 




Code Snippet

For Each ostep In oPkg

If ostep.ExecutionResult = DTSStepExecResult_Failure Then

ProcessSubDTSPackage = DTSTaskExecResult_Failure

End If

Next

 



Thanks

Subhash Subramanyam

View Replies View Related

Execute Package Task Failed When Deployed To Server..

Hi,

I have a package that contains an Execute Package Task...   it works fine when on my local machine and on our test-server.
After deploying the SSIS solution to our customers server, I open the project in Visual Studio and run the mainPackage in debug mode and the Task fails when trying to execute the package..   if I remove everything in the childpackage it still fails... the path to the package is correct and I know that I have rigths to execut it. I do not use any package security/encryption..
If i create a new package in the project and create a new fileconnection to it the Execute Package Task executes correctly, with the exact same content as the original package...

So my guess is that something in the FileConnetion object is set wrong, but i cannot understand what it is. The errormessage i get is something like this. "Execute Package Failed. Could not execute package".

Anyone had the same problem as I? I´m grateful for any help!

/erik

View Replies View Related

Task Failed, SSIS Package Reporting Success

I'm debugging a SSIS package in Visual Studio and I have a task that failes but the overall package is reporting success.  The deployed package in SQL2005 is doing the same thing.
 

Task failed: FactVisitApplicationInventory

SSIS package "PACE to PACE DW PROD.dtsx" finished: Success.

The program '[4652] PACE to PACE DW PROD.dtsx: DTS' has exited with code 0 (0x0).

 
I have set FailPackageOnFailure=True, FailParentOnFailure=True, and MaximumErrorCount=0 on this task and am executing just this single task in Studio and I can't get the Package to report a failure. 

 
Any ideas?

View Replies View Related

This Task Or Container Has Failed, But Because FailPackageOnFailure Property Is FALSE, The Package Will Continue.

This task or container has failed, but because FailPackageOnFailure property is FALSE, the package will continue. This warning is posted when the SaveCheckpoints property of the package is set to TRUE and the task or container fails. 

 

I have just spotted the message above in one of my log files.

 

I've never noticed it before. Is it new in SP1? I'm guessing it must be.

 

If so - good job.  This is a very important addition because the behaviour of checkpoints without setting FailPackageOnFailure=TRUE is not intuitive (in my opinion).

 

-Jamie

 

View Replies View Related

Load A SSIS Package Via Web Service: The Package Failed To Load Due To Error 0xC0011008 &&"Error Loading From XML.WHAT IS THAT?

Hello,

I have a big problem and i'm not able to find any hint on the Network.

I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)

I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.

I imported the dtsx file inside my "Stored Packages".

I would like to load and run the package programmatically on a Remote Scenario using the web services.

I created a solution with  web service and web page that invoke the web service.

When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)

I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.

The error message doesn't help so much and there is nothing on the www to give me and advice....

Is it a SSIS problem???

Thank you for any help!!

Marina B.

 

 

View Replies View Related

Execute Package Task: Error 0x80070005 While Preparing To Load The Package. Access Is Denied.

I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.

The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.

I have the Execute Package Task configured as follows:

Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)

I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.

I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):

450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.

I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?

View Replies View Related

[ActiveX Script Task] Error: Retrieving The File Name For A Component Failed With Error Code 0x001B6438.

This error occurs when the ActiveX task tries to execute: 

[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.

Anybody know how to troubleshoot these errors?  I can't find anything on this error code.  The same script works in DTS. 

 

 

 

 

View Replies View Related

Exec Pkg Task: Error 0xC0202009 While Preparing To Load The Package. An OLE DB Error Has Occurred. Error Code: 0x%1!8.8X!.

I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says

Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.



Any clue ?


Thanks,
Fahad

View Replies View Related

Error Creating Package - Failed To Save Package File &&"... Emp EmpD4B.tmp&&" With Error 0x80040154 &&"Class Not Registered&&"

I had just installed SQL 2005 dev on my laptop and got an error message when I tried to create a package using the BI IDE. I received the same error using VS2005 IDE. But the project was created regardless without any packages. When I tried to create a new package in the project, I received the same error again, but with an option to view the error details.
 
Following is the text of the error details:
 
TITLE: Microsoft Visual Studio
------------------------------
 
Error creating package
 
------------------------------
ADDITIONAL INFORMATION:
 
Failed to save package file "C:Documents and SettingsmyoungbloodLocal SettingsTemp mpD4B.tmp" with error 0x80040154 "Class not registered".
 

------------------------------
 
Failed to save package file "C:Documents and SettingsmyoungbloodLocal SettingsTemp mpD4B.tmp" with error 0x80040154 "Class not registered".
 

------------------------------
BUTTONS:
 
OK
------------------------------
I found a similar post that suggested that they try the following:
 

regsvr32 msxml3.dll
regsvr32 msxml4.dll
regsvr32 msxml6.dll
 
But msxml6.dll could not be found.
 
I did get a copy of this file from a coworker, and after copying it and registering it, I was able to add a package to the project.
 
My concern now is what is the likelyhood of this being the only file missing from the installation.
 
I'm wondering if I should reinstall, or (if it exists) do a repair on the installation.
 
Thanks.
 
Marshall

View Replies View Related

Package Failed : Failed To Decrypt Protected XML Node &&"DTS:Password&&" With Error

Dear all,

I've built SSIS package and made a job to execute it automatically but it always returns an error. The job returns OK but when we looked at the Log File viewer, it conatins this error log :

Key not valid for use in specified state

Failed to decrypt protected XML node "DTS Password" with error

What's wrong with the package ?
Thanks in advance.


Best regards,

Hery

View Replies View Related

DTS Package Error Using Execute Package Task

I created a single DTS package with 12 DTS packages in it by using execute package task. Every night the DTS runs and loads the data from mas90 soa files into the sql tables. It's been running fine for 2 weeks and since last few days I was getting the error "Execution was canceled by user" and also attached the detailed error below.
Then did the following tests manually:
Test1. Opened the single DTS packgae which has 12 packages in it and then tried to execute one of the dts package and after a while got the error "Execution was canceled by user"
Test2: Opened one of the 12 individual packages and tried to execute, it ran fine, no problem.
So this is making me to think that because of having 12 dts in a single dts package where I used execute package task, that's what is causing this error. If so, what options I have in order to run 12 dts packages at the same time, any help is greatly appreciated as this is happening in our production database.   
 
Here is the error from the error log:
The execution of the following DTS Package failed:

Error Source: Microsoft Data Transformation Services (DTS) Package
Error Description:Execution was canceled by user.
Error code: 80040427
Error Help File : sqldts80.hlp
Error Help Context ID:10100

Package Name: DTSPackage
Package Description: DTS package description
Package ID: {645722E4-C653-48AE-9EB4-9188DD20A599}
Package Version: {2DEEC696-E63F-45B1-8F72-F577E8D23437}
Package Execution Lineage: {BD8FEDC9-3C30-454E-A68A-AC2B99E999CA}
Executed On: servername
Executed By: username
Execution Started: 12/18/2007 11:10:10 AM
Execution Completed: 12/18/2007 11:10:11 AM
Total Execution Time: 0.812 seconds

Package Steps execution information:


Step 'Create Table tablename Step' succeeded
Step Execution Started: 12/18/2007 11:10:10 AM
Step Execution Completed: 12/18/2007 11:10:10 AM
Total Step Execution Time: 0.078 seconds
Progress count in Step: 0

Step 'Copy Data from file to tablename Step' succeeded
Step Execution Started: 12/18/2007 11:10:10 AM
Step Execution Completed: 12/18/2007 11:10:11 AM
Total Step Execution Time: 0.172 seconds
Progress count in Step: 84

Step 'DTSStep_DTSExecuteSQLTask_1' succeeded
Step Execution Started: 12/18/2007 11:10:10 AM
Step Execution Completed: 12/18/2007 11:10:10 AM
Total Step Execution Time: 0.125 seconds
Progress count in Step: 0

Step 'DTSStep_DTSExecuteSQLTask_2' was not executed

Step 'DTSStep_DTSExecuteSQLTask_3' was not executed

Step 'DTSStep_SDN.SMTPTask_1' was not executed

Step 'DTSStep_SDN.SMTPTask_2' succeeded
Step Execution Started: 12/18/2007 11:10:10 AM
Step Execution Completed: 12/18/2007 11:10:10 AM
Total Step Execution Time: 0.187 seconds
Progress count in Step: 0
Task Log for this step:
-----Start Task Log-----

Error = 1 (00000001), Description = DTS: Log initialized
Error = 1 (00000001), Description = DTS: Log closed

-----End Task Log-----


Step 'DTSStep_SDN.SMTPTask_3' was not executed

Step 'DTSStep_SDN.SMTPTask_4' succeeded
Step Execution Started: 12/18/2007 11:10:10 AM
Step Execution Completed: 12/18/2007 11:10:10 AM
Total Step Execution Time: 0.219 seconds
Progress count in Step: 0
Task Log for this step:
-----Start Task Log-----

Error = 1 (00000001), Description = DTS: Log initialized
Error = 1 (00000001), Description = DTS: Log closed

-----End Task Log-----
 

View Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved