Prevent Empty Reports From Being Sent To Email
I'm using (SQL RS 2005) data-driven subscription with Delivery by: Email.
How do I prevent that an E-mail is sent when the result set is empty?
(I don't wan't to do this in the select statment where I select my subscribers and parameters for the report)
View Complete Forum Thread with Replies
Related Forum Messages:
Prevent Email Authentication
Due to the 'interesting' set up of AD, email etc we are unable to send reports as attachments. It would appear that it is trying to authenticate the user to see if they have permission to view the report, as though they were viewing it in real time. Is there any way to override this behaviour? If not then all we can do is email them a link to the report, which sort of defeats the object.
View Replies !
SQL Server How To Prevent Locking To Do Read-Only Reports
Need some information regarding SQL Server locking.Requirement is to run SQL Statements for reports (read-only) that willnot lock-out other people trying to update (write lock). For this, wetried the following to make the db connection not deny write locks(our report code will not have a read-only lock).ADODB.ConnectionObj.Mode =adModeShareDenyNoneBut this made our connection bumped whenever someone tried to update.Tried enabling dirty reads by doing:ADODB.ConnectionObj.IsolationLevel =adXactBrowseEven this made our connection bumped whenever someone tried to update.Is there a way to achieve what is needed without having a seperatedatabase for reports?
View Replies !
Empty Page 1 On Short Reports?
I have a suite of several SSRS reports that differ essentially on the stored procedure called. All have very the same one-page header block and all have a footer. Those where a large number of pages are produced, page without fault when printed or converted to PDF. Two page reports often break down on printing, so that page 1 only has the header and a footer and all the detail lines are printed on page2 (together with the footer). However on the screen the report paged correctly. I have checked all the obvious problems such as page dimensions exceeding that of the print medium. (A series of such problems was fixed earlier in development.) I have observed this behaviour with SQL2005 SP1 and SP2 (i.e. SP2 did not provide any fix in this area). The host OS for development and production is Windows 2003 server. The tests were done by viewing in IE6 and the fault only became apparent when going to print preview, printing or in PDF production. This has the appearance of a bug in SSRS hereby intermediate length reports are not handled correctly. It appears to happen when the amount of detail lines just fills page 2. As soon as the report has sufficient lines to be 3 pages long (page 1 is header plus some details lines plus footer, page 2 is full of detail lines plus footer and page 3 is remaining detail lines plus footer then the problem is no longer seen! Where the detail lines will all fit on page 1, then the problem is not seen. I observe this variation in behaviour since I am able to switch between different sized datasets and thus switch between the different scenarios described above. I should also note that the reports are in landscape mode.
View Replies !
Showing Empty Cells From OLAP Cube In Report Builder Reports
Hi all, I'm trying to get empty cells from an OLAP cube to display in a report designed using the Report Builder. Of the three report types, only the Table report shows the empty cells. Is there any option/setting that I need to enable to get this to work for the Matrix or Chart reports? Something like the "Show Empty Cells" option that is available in the pivot table used by BI Dev Studio? Any help appreciated.
View Replies !
C# With Reporting Services To Email Reports
I currently have a report on our Reporting Services 2005 server that takes a CompanyID as its only parameter. Also, in our database, we have a list of contacts that are linked to the CompanyID that is used in the report. What I would like to do is email a pdf or each company's report to every contact for that company in our database daily. However I am stuck on how to do that. My project is using C#, but if there is a way to do this directly through Reporting Services I could do that as well. If anyone could help me out I would greatly appreciate it. Thanks!
View Replies !
Sending Reports Through Email From Aspx Page
Hi friends, I have a datagrid on a aspx page. Each row has fields along with a link for executing the report. On click of this link, I want to execute a report and email the report to the receipents in pdf format. can anyone help me in this regard. Thanx
View Replies !
Generate Reports From Database Information And Email It Weekly
Hello there, Im alittle stuck what im trying to find out is: MS SQL 2000 1. How to Generate Reports from selected Database information 2. then email that report weekly. Ive heard about Visual Studio .NET 2003: Business Intelligence Projects but is there away to create the reports directly in Enterprise manager? any pointers would be great
View Replies !
Subscription Reports Fail To Email While Others In The Same Batch Work Fine.
SSRS 2000 Data driven subscription uses a SQL query to create report parameter values. The subscription errors are inconsistent meaning sometimes no reports in a batch fail and sometimes 3 out of 5 will fail. I don't think it is data related because I'm using the same data each time. When a report fails to email there is a consistent error related to rendering a chart. That message is in red below. The data source is Analysis Services 2000. Has anyone seen this before? I've seen a lot of postings that are similar but no solutions. Is it possible for RS to lose data or get corrupt data from an MDX query? Is there a timeout between RS and Analysis Services (PivotTable Service) to check? SSRS trace log: ReportingServicesService!runningjobs!237c!10/25/2007-14:15:01:: w WARN: Thread pool pressure: turning off threads ReportingServicesService!processing!237c!10/25/2007-14:15:01:: e ERROR: System.ArgumentException: Invalid parameter used. at System.Drawing.Bitmap..ctor(Int32 width, Int32 height, PixelFormat format) at System.Drawing.Bitmap..ctor(Int32 width, Int32 height) at Dundas.Charting.WebControl.ChartImage.GetImage() at Dundas.Charting.WebControl.Chart.Save(Stream imageStream) at Microsoft.ReportingServices.ReportRendering.DundasChart.GetImage(ImageType type, Boolean& hasImageMap) at Microsoft.ReportingServices.ReportRendering.DundasChart.GetImage(ImageType type, ChartInstanceInfo instanceInfo, Boolean& hasImageMap) at Microsoft.ReportingServices.ReportRendering.Chart.GetImage(ImageType type, Boolean& hasImageMap) ReportingServicesService!processing!237c!10/25/2007-14:15:01:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An error has occurred during rendering of chart chart_SalesMarginTrend. Details: Invalid parameter used., ; Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An error has occurred during rendering of chart chart_SalesMarginTrend. Details: Invalid parameter used. ---> System.ArgumentException: Invalid parameter used. at System.Drawing.Bitmap..ctor(Int32 width, Int32 height, PixelFormat format) at System.Drawing.Bitmap..ctor(Int32 width, Int32 height) at Dundas.Charting.WebControl.ChartImage.GetImage() at Dundas.Charting.WebControl.Chart.Save(Stream imageStream) at Microsoft.ReportingServices.ReportRendering.DundasChart.GetImage(ImageType type, Boolean& hasImageMap) at Microsoft.ReportingServices.ReportRendering.DundasChart.GetImage(ImageType type, ChartInstanceInfo instanceInfo, Boolean& hasImageMap) at Microsoft.ReportingServices.ReportRendering.Chart.GetImage(ImageType type, Boolean& hasImageMap) --- End of inner exception stack trace --- ReportingServicesService!reportrendering!237c!10/25/2007-14:15:01:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.WrapperReportRenderingException: Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown., ; Info: Microsoft.ReportingServices.ReportProcessing.WrapperReportRenderingException: Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. ---> Microsoft.ReportingServices.ReportRendering.ReportRenderingException: Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An error has occurred during rendering of chart chart_SalesMarginTrend. Details: Invalid parameter used. ---> System.ArgumentException: Invalid parameter used. at System.Drawing.Bitmap..ctor(Int32 width, Int32 height, PixelFormat format) at System.Drawing.Bitmap..ctor(Int32 width, Int32 height) at Dundas.Charting.WebControl.ChartImage.GetImage() at Dundas.Charting.WebControl.Chart.Save(Stream imageStream) at Microsoft.ReportingServices.ReportRendering.DundasChart.GetImage(ImageType type, Boolean& hasImageMap) at Microsoft.ReportingServices.ReportRendering.DundasChart.GetImage(ImageType type, ChartInstanceInfo instanceInfo, Boolean& hasImageMap) at Microsoft.ReportingServices.ReportRendering.Chart.GetImage(ImageType type, Boolean& hasImageMap) --- End of inner exception stack trace --- at Microsoft.ReportingServices.ReportRendering.Chart.GetImage(ImageType type, Boolean& hasImageMap) at Microsoft.ReportingServices.ReportRendering.Chart.GetImage() at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderChart(PageTableGrid pageTableGrid, Int32 row, Int32 col, ReportItemInfo reportItemInfo, PageCell pageCell, Boolean addHeaderRows) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderGridCell(PageLayout pageLayout, Int32 row, Int32 col, Hashtable& duplicateItemsTable, Boolean addHeaderRows) at Microsoft.ReportingServices.Rendering.BIFFUtility.WorkSheet.WriteRowBlocksAndCells(ExcelRenderer excelRenderer, Stream stream, UInt32 indexBeginOffsetPosition, Int32 minCol, Int32 maxCol) at Microsoft.ReportingServices.Rendering.BIFFUtility.BaseWorkSheet.WriteWorkSheet(ExcelRenderer excelRenderer, Stream stream, Int32 offset) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderPageLayout(PageLayout pageLayout, Int32& currentPageNumber, Stack& stack) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderPageCollection(PageCollection pageCollection, Int32& currentPageNumber, Stack& stack, PageLayout& lastPageLayout) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GenerateWorkSheets() at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GenerateMainSheet() at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderExcelWorkBook(CreateAndRegisterStream createAndRegisterStream) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.ProcessReport(CreateAndRegisterStream createAndRegisterStream) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStream) --- End of inner exception stack trace --- at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStream) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.a(DateTime A_0, GetReportChunk A_1, ProcessingContext A_2, RenderingContext A_3, CreateReportChunk A_4, Boolean& A_5) --- End of inner exception stack trace --- ReportingServicesService!library!237c!10/25/2007-14:15:01:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties. ReportingServicesService!emailextension!237c!10/25/2007-14:15:01:: Error sending email. Microsoft.ReportingServices.Diagnostics.Utilities.RSException: Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. ---> Microsoft.ReportingServices.ReportProcessing.WrapperReportRenderingException: Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. ---> Microsoft.ReportingServices.ReportRendering.ReportRenderingException: Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An error has occurred during rendering of chart chart_SalesMarginTrend. Details: Invalid parameter used. ---> System.ArgumentException: Invalid parameter used. at System.Drawing.Bitmap..ctor(Int32 width, Int32 height, PixelFormat format) at System.Drawing.Bitmap..ctor(Int32 width, Int32 height) at Dundas.Charting.WebControl.ChartImage.GetImage() at Dundas.Charting.WebControl.Chart.Save(Stream imageStream) at Microsoft.ReportingServices.ReportRendering.DundasChart.GetImage(ImageType type, Boolean& hasImageMap) at Microsoft.ReportingServices.ReportRendering.DundasChart.GetImage(ImageType type, ChartInstanceInfo instanceInfo, Boolean& hasImageMap) at Microsoft.ReportingServices.ReportRendering.Chart.GetImage(ImageType type, Boolean& hasImageMap) --- End of inner exception stack trace --- at Microsoft.ReportingServices.ReportRendering.Chart.GetImage(ImageType type, Boolean& hasImageMap) at Microsoft.ReportingServices.ReportRendering.Chart.GetImage() at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderChart(PageTableGrid pageTableGrid, Int32 row, Int32 col, ReportItemInfo reportItemInfo, PageCell pageCell, Boolean addHeaderRows) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderGridCell(PageLayout pageLayout, Int32 row, Int32 col, Hashtable& duplicateItemsTable, Boolean addHeaderRows) at Microsoft.ReportingServices.Rendering.BIFFUtility.WorkSheet.WriteRowBlocksAndCells(ExcelRenderer excelRenderer, Stream stream, UInt32 indexBeginOffsetPosition, Int32 minCol, Int32 maxCol) at Microsoft.ReportingServices.Rendering.BIFFUtility.BaseWorkSheet.WriteWorkSheet(ExcelRenderer excelRenderer, Stream stream, Int32 offset) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderPageLayout(PageLayout pageLayout, Int32& currentPageNumber, Stack& stack) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderPageCollection(PageCollection pageCollection, Int32& currentPageNumber, Stack& stack, PageLayout& lastPageLayout) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GenerateWorkSheets() at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GenerateMainSheet() at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderExcelWorkBook(CreateAndRegisterStream createAndRegisterStream) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.ProcessReport(CreateAndRegisterStream createAndRegisterStream) at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStream) --- End of inner exception stack trace --- at Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStream) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.a(DateTime A_0, GetReportChunk A_1, ProcessingContext A_2, RenderingContext A_3, CreateReportChunk A_4, Boolean& A_5) --- End of inner exception stack trace --- at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.a(DateTime A_0, GetReportChunk A_1, ProcessingContext A_2, RenderingContext A_3, CreateReportChunk A_4, Boolean& A_5) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc) at Microsoft.ReportingServices.Library.RSService.RenderAsLive(CatalogItemContext reportContext, ItemProperties properties, ParameterInfoCollection effectiveParameters, Guid reportId, ClientRequest session, String description, ReportSnapshot intermediateSnapshot, DataSourceInfoCollection thisReportDataSources, Boolean cachingRequested, Warning[]& warnings, ReportSnapshot& resultSnapshotData, DateTime& executionDateTime, RuntimeDataSourceInfoCollection& alldataSources, UserProfileState& usedUserProfile) at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters) at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute() at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() --- End of inner exception stack trace --- at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobTypeEnum type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) at Microsoft.ReportingServices.Library.ReportImpl.Render(String renderFormat, String deviceInfo) at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.ConstructMessageBody(IMessage message, Notification notification, SubscriptionData data) at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.CreateMessage(Notification notification) at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification) ReportingServicesService!library!237c!10/25/2007-14:15:01:: Data Driven Notification for activation id 1ab1f67c-82c0-4dba-9745-a4057ab1cb4f was saved. ReportingServicesService!library!237c!10/25/2007-14:15:01:: Status: Failure sending mail: Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. ReportingServicesService!notification!237c!10/25/2007-14:15:01:: Notification 15307c1b-0b60-493d-b2c1-fde89780ff06 completed. Success: False, Status: Failure sending mail: Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown., DeliveryExtension: Report Server Email, Report: SalesPerfScorecard_Email, Attempt 0 ReportingServicesService!dbpolling!237c!10/25/2007-14:15:01:: NotificationPolling finished processing item 15307c1b-0b60-493d-b2c1-fde89780ff06
View Replies !
Mass Email: Text Body Keeps Looping In Each Email
First off, my server uses CDO, the updated version of CDONTS, to send mail. The script works however, it sends the emails out and keeps looping the message body within the text of the email. here's an example: I added fake users to my table called REALTORS. this was the result of the email sent out: <!-- START EMAIL MAIL OUT --> I am an realtor in Florida and I found you from surfing around Poop Title http://www.poop.com I have a real estate site and I am interested in exchanging links with your site. This is benefitial to you and I because each external website that links to your page counts as a "vote" for your website. The more links to your site, the better search engine placement you will recieve in google (it's called Google PageRank)...which ultimately means more exposure. It's a win/win situation. If you are interested, you may add your website to my link directory at the address below (it's all automated). Make sure to pick your correct category and sub-categories: http://www.realestate321.com/resources/resources.asp Once added you will be placed in a "holding bin" waiting to be approved. Your site will be approved when I find a link on your website to my website. My website will send out a "robot" once a month to make sure that my link is still on your site. If it's not understandably, your link will be removed from my page by that robot. Best Regards, Nick McGirr Real Estate Agent http://www.realestate321.com/ "Buying and Selling Homes in the (321) Area Code."I am an realtor in Florida and I found you from surfing around Haha titleage http://www.hahaha.com I have a real estate site and I am interested in exchanging links with your site. This is benefitial to you and I because each external website that links to your page counts as a "vote" for your website. The more links to your site, the better search engine placement you will recieve in google (it's called Google PageRank)...which ultimately means more exposure. It's a win/win situation. If you are interested, you may add your website to my link directory at the address below (it's all automated). Make sure to pick your correct category and sub-categories: http://www.realestate321.com/resources/resources.asp Once added you will be placed in a "holding bin" waiting to be approved. Your site will be approved when I find a link on your website to my website. My website will send out a "robot" once a month to make sure that my link is still on your site. If it's not understandably, your link will be removed from my page by that robot. Best Regards, Nick McGirr Real Estate Agent http://www.realestate321.com/ "Buying and Selling Homes in the (321) Area Code."I am an realtor in Florida and I found you from surfing around niclipse . com http://www.niclipse.com I have a real estate site and I am interested in exchanging links with your site. This is benefitial to you and I because each external website that links to your page counts as a "vote" for your website. The more links to your site, the better search engine placement you will recieve in google (it's called Google PageRank)...which ultimately means more exposure. It's a win/win situation. If you are interested, you may add your website to my link directory at the address below (it's all automated). Make sure to pick your correct category and sub-categories: http://www.realestate321.com/resources/resources.asp Once added you will be placed in a "holding bin" waiting to be approved. Your site will be approved when I find a link on your website to my website. My website will send out a "robot" once a month to make sure that my link is still on your site. If it's not understandably, your link will be removed from my page by that robot. Best Regards, Nick McGirr Real Estate Agent http://www.realestate321.com/ "Buying and Selling Homes in the (321) Area Code."I am an realtor in Florida and I found you from surfing around. I have a real estate site and I am interested in exchanging links with your site. This is benefitial to you and I because each external website that links to your page counts as a "vote" for your website. The more links to your site, the better search engine placement you will recieve in google (it's called Google PageRank)...which ultimately means more exposure. It's a win/win situation. If you are interested, you may add your website to my link directory at the address below (it's all automated). Make sure to pick your correct category and sub-categories: http://www.realestate321.com/resources/resources.asp Once added you will be placed in a "holding bin" waiting to be approved. Your site will be approved when I find a link on your website to my website. My website will send out a "robot" once a month to make sure that my link is still on your site. If it's not understandably, your link will be removed from my page by that robot. Best Regards, Nick McGirr Real Estate Agent http://www.realestate321.com/ "Buying and Selling Homes in the (321) Area Code." <!--[==-- EMAIL MAIL OUT FINISHED -------> ANY IDEAS ON HOW TO SEND EACH EMAIL TO EACH USER INDIVIDUALLY WHILE USING THE INFORMATION LINKED IN THE DATABASE WITHOUT LOOPING OTHER PEOPLE'S DB INFO IN THE SAME EMAIL? Here's the script below.... <title>Email The List</title> <% nickemail = request.form("sender") subject = request.form("subject") If Len(subject) > 0 Then dsn="Provider=SQLOLEDB;Data Source=sql.string.com, etc ect" Set Conn = Server.CreateObject("ADODB.Connection") Conn.Open dsn Set RS = Server.CreateObject("ADODB.Recordset") SQL = "SELECT title, url, email FROM Realtors" RS.open SQL, conn Do While NOT RS.eof strTXT = strTXT & "I am an realtor in Florida and I found you from surfing around" If Len(RS("title")) > 0 Then strTXT = strTXT & vbcrlf & vbcrlf & RS("title") & vbcrlf strTXT = strTXT & RS("url") & vbcrlf & vbcrlf Else strTXT = strTXT & "." & vbcrlf & vbcrlf End If strTXT = strTXT & "I have a real estate site and I am interested in exchanging links with your site. This is benefitial to you and I because each external website that links to your page counts as a ""vote"" for your website. The more links to your site, the better search engine placement you will recieve in google (it's called Google PageRank)...which ultimately means more exposure. It's a win/win situation." &vbcrlf &vbcrlf strTXT = strTXT & "If you are interested, you may add your website to my link directory at the address below (it's all automated). Make sure to pick your correct category and sub-categories:" &vbcrlf strTXT = strTXT & "http://www.realestate321.com/resources/resources.asp" & vbcrlf strTXT = strTXT & "Once added you will be placed in a ""holding bin"" waiting to be approved. Your site will be approved when I find a link on your website to my website. My website will send out a ""robot"" once a month to make sure that my link is still on your site. If it's not understandably, your link will be removed from my page by that robot." & vbcrlf &vbcrlf strTXT = strTXT & "Best Regards," & vbcrlf & vbcrlf strTXT = strTXT & "Nick McGirr" & vbcrlf strTXT = strTXT & "Real Estate Agent" & vbcrlf strTXT = strTXT & "http://www.realestate321.com/" & vbcrlf strTXT = strTXT & """Buying and Selling Homes in the (321) Area Code.""" set objMessage = createobject("cdo.message") set objConfig = createobject("cdo.configuration") ' Setting the SMTP Server Set Flds = objConfig.Fields Flds.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2 Flds.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = "localhost" Flds.update Set objMessage.Configuration = objConfig objMessage.To = RS("email") objMessage.From = nickemail objMessage.Subject = subject objMessage.TextBody = strTXT 'objMessage.HtmlBody = strHTML objMessage.fields.update objMessage.Send RS.movenext Loop Conn.close set Conn = nothing set objMessage = nothing set objConfig = nothing ShowThanksMsg Else End If ShowForm Sub ShowForm %> <% Session("department")="home" %> <center> <form action=email.asp method=post> <table border=0 cellpadding=4 cellspacing=2> <table> <tr><td><font class=tbody><b>From:</b></font></td><td><input type=text name=sender value="me@me.com"></td></tr> <tr><td><font class=tbody><b>To:</b></font></td><td><font class=tbody>Brevard County Emails</font></td></tr> <tr><td><font class=tbody><b>Subject:</b></font></td><td><input class=inputfield type=text name=subject size=22></td></tr> <tr><td colspan=2><input type=image align=right src=/_images/submit.gif border=0 name=B1></td></tr> </table> </form></center> <!-- <tr><td colspan=2><font class=tbody><b>Comments:</b></font><br><textarea class=inputfield rows=3 maxlength=100 name=message cols=40></textarea></td></tr> --> <% End Sub Sub ShowThanksMsg() response.write "<center><font size=5><b>Message Sent!</b></font><br><br>" response.write "your message has been delivered to all members." End Sub %>
View Replies !
Help Split List Of Email Add Comma For Evry Email
need help split list of email add comma for evry email i have tabe "tblLogin" and in this table i have field emall like this emall ----------------------------------------- aaa@hhhh.mm nnn@hhhh.mm mmm@hhhh.mm need to do ilke this Code Snippet @list_email = (SELECT emall FROM tblLogin) --------------------------i get this -----------------------@list_email=aaa@hhhh.mm ; nnn@hhhh.mm ; mmm@hhhh.mm @recipients = @list_email Code Snippet IF EXISTS( SELECT * FROM [db_all].[dbo].[taliB] ) BEGIN DECLARE @xml NVARCHAR(MAX)DECLARE @body NVARCHAR(MAX) SET @xml =CAST(( SELECT FirstName AS 'td','', LastName AS 'td','' , Date_born AS 'td','' , Age AS 'td','' , BirthdayToday AS 'td','' , BirthdayThisWeek AS 'td' FROM [Bakra_all].[dbo].[taliB] ORDER BY LastName FOR XML PATH('tr'), ELEMENTS ) AS NVARCHAR(MAX)) SET @body ='<html><H1 align=center>aaaaaaaaaaaaaaaaaaaaaa</H1><body ><table border = 1 align=center dir=rtl> <tr> <td>name</td> <td>fname</td> <td>date</td> <td>age</td> <td>aaaaaaaaa</td> <td>bbbbbbbbbbbbbbb</td> </tr>' SET @body = @body + @xml +'</table></body></html>' EXEC msdb.dbo.sp_send_dbmail @recipients =N'rrr@iec.co.il', @copy_recipients='rrrrr@iec.co.il', @body = @body, @body_format ='HTML', @subject ='ggggggggggggggggggggg', @profile_name ='ilan' END ELSE print 'no email today'
View Replies !
URGENT: REPORTS Not Working In SQL Report Srvr && Crystal Reports (moved Server)
Reports not working at all: Need to move full ASp.Net application(VS.Net 2003) /SQL Server 2000 DB to another machine. The Web application & its SQL Database is successfully moved and functioning but am unable to access any of the reports from within it. The reports are in: A) SQL server report server & B) Crystal reports For A)-SQL SRVR-RPT SRVR: Installed SQL Server2005 Express version- with reporting srvr (advance mgt). The report server is working well- from IIS i can open both http://..reports and http://...reportserver links without error. But when i click on a link in the ASP.Net application it gives error: /HRNE_REPORTS/rpt_employees does not exist( rsitemnotfound) . 1.In http://..reports configration I have made a folder HRNET_REPORTS. But how do i put the individual reports? There is no .RDL file in the application folder only .aspx files for the reports exist. 2.Do i need to restore the two reporting server databases from the old machine to the new one and have this new 2005 reporting server use these 2 databases instead? If YES - then i hope sql express' reporting server will be able to point to the OLD (sql 2000) database (restored with replace option)?? For B)- CRYSTAL REPORTS: Have not installed anything special on the new machine. The reports give some key problem (Crystal decisions...key..)- I can tell u later the exact error. Since i dont have VS.Net and crystal reports 9 softwares but i think i can have 'Busines Objects XI software' - Will installing the latest 'Business Objects- Crystal reports' solve this??NEW MACHINE: windows XP-professional(so could'nt install sql 2000).; SQL express 2005
View Replies !
Comparison Of SQL Server Reporting Services To Access Reports, Crystal Reports, Cognos Or Other Options
Hello SQL Server Experts, Data Analysts, and Report Writers et al: re: Reporting Options with SQL Server I wanted to propose an offshoot to the pryor thread: Would anyone take a stab at comparing Access Reports, Crystal Reports, Cognos or other options to all the Reporting Services and its components offered as part ofSQL Server, especially as to extracting data from SQL Server into a report format? I guess this is a far as capabilites, ease of use, limitations, and especially formatting or presentation of the end report product? Thank you to all, and I hope this is a beneficial discussion to others. Hal1490 Hal9000
View Replies !
Reports Usage Frequency For All The Existing Reports On SSRS 2000
I have an already published application running several MS SQL Server 2000 Reporting Services report. I need a way to find from either the reporting services log or the application server (IIS) logs or windows log to know the frequency of each report being used. Based on this info, the business needs to know which reports are being used and to what extend? How can I acheive this? I have already got the IIS logs and it did not give the required info. I have looked into the Reporting Services logs but it does not provide the info either. Any help is appreciated
View Replies !
Reports Usage Frequency For All The Existing Reports On SSRS 2000
I have an already published application running several MS SQL Server 2000 Reporting Services report. I need a way to find from either the reporting services log or the application server (IIS) logs or windows log to know the frequency of each report being used. Based on this info, the business needs to know which reports are being used and to what extend? How can I acheive this? I have already got the IIS logs and it did not give the required info. I have looked into the Reporting Services logs but it does not provide the info either. Any help is appreciated
View Replies !
SQL Injection - How To Prevent It?
I am building my first ASP.Net app from scratch and while working on the DAL I came across the problem of SQL Injection. I searched on the web and read different articles but I am still unsure about the answer. My question is should I add db.AddInParameter(dbCommand, "AvatarImageID", DbType.Int32, avatarImageID); Add in Parameters to my C# code to avoid SQL Injection. What is the best practice. I am unclear if the stored procedure already helps me avoid SQl Injection or if I need the add in parameters in the C# methods to make it work. I need some help. Thanks, Newbie My C# update method in the DAL (still working on the code) private static bool Update(AvatarImageInfo avatarImage) { //Invoke a SQL command and return true if the update was successful. db.ExecuteNonQuery("syl_AvatarImageUpdate", avatarImage.AvatarImageID, avatarImage.DateAdded, avatarImage.ImageName, avatarImage.ImagePath, avatarImage.IsApproved); return true; } I am using stored procedures to access the data in the database. My update stored proc set ANSI_NULLS ON set QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[syl_AvatarImageUpdate] @AvatarImageID int, @DateAdded datetime, @ImageName nvarchar(64), @ImagePath nvarchar(64), @IsApproved bit AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; BEGIN TRY UPDATE [syl_AvatarImages] SET [DateAdded] = @DateAdded, [ImageName] = @ImageName, [ImagePath] = @ImagePath, [IsApproved] = @IsApproved WHERE [AvatarImageID] = @AvatarImageID RETURN END TRY BEGIN CATCH --Execute LogError SP EXECUTE [dbo].[syl_LogError]; --Being in a Catch Block indicates failure. --Force RETURN to -1 for consistency (other return values are generated, such as -6). RETURN -1 END CATCH END
View Replies !
Prevent SP Compilation
Hi,I'm using SQL Server 2000 MSDE on a laptop running Windows XP.I have a couple of SP's that that quite some time to compile. So I waswondering: is there any way to have the database *not* recompile them everytime after a reboot?BOL says: "As a database is changed by such actions as adding indexes orchanging data in indexed columns, the original query plans used to accessits tables should be optimized again by recompiling them. This optimizationhappens automatically the first time a stored procedure is run afterMicrosoft® SQL ServerT 2000 is restarted."Now the SQL Server is restarted a lot, because laptops don't have endlessbatteries <g>Cheers,Bas
View Replies !
Prevent Sql Job Failure.
Have a job that calls a DTS package, DTS is an Export & Import wizard to copy tables. Someone deleted a table from source and my job failed last night. Inputs appreaciated.
View Replies !
How To Prevent Db Deletion
Hi I want to try and protect myself from my own stupidity. I have a number of sql databases, but one is LIVE. It is easy to drop tables but I want to set something (e.g. a password) which will help prevent me from dropping tables on the live database. Any help/direction here would be appreciated.
View Replies !
Best Way To Prevent Deadlocks
I'm going thru my application log, and just seeing what errors are popping up. I have a relatively intense search feature, thats causing alot of deadlocks. Exception type: SqlException Exception message: Transaction (Process ID 105) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction. In general, what's the best way to resolve this ? Should I see if I can apply "WITH (NOLOCK)" to my data ? Any suggestions are greatly appreciated ! thanks again! mike123
View Replies !
Prevent Duplication On UPDATE
Hello I noticed a spelling mistake in the data in a column of several tables, I used the following syntax to alter the spelling: UPDATE [dbo].[Prod_Cat] SET [ProdName]=N'merseyside' WHERE ProdName = 'mmserseyside' The above code correctly updated the spelling error, but it also inserted a new row with the corrected data. So I found myself with two Identical rows containing the corrected information. I had to manually delete the extra row. Because if I had put in a DELETE statement, I would have then lost both rows. What do I need to do to prevent this happening next time. As I find that I need to update the names of some products, but I don't want to duplicate them. Thanks Lynn
View Replies !
How Do I: Prevent Race Condition?
I want to be able to read and update a value in the database without entering a race condition. For example: User #1 reads a row from the database, changes a value then writes the value back. User #2 reads the same row AFTER user #1 has read it, but BEFORE user #1 writes it back. User #2 then changes the value and writes it back, overwriting the value that user #1 wrote. I thought I could do this with transactions, but it just makes user #2 wait until user #1 is done writing before user #2 can write. It doesn't stop user #2 from reading while user #1 has it out. Does that make sense?
View Replies !
How To Prevent SQL Injection Attacks
Hi, On my site I have a simple textbox which is a keyword search, people type a keyword and then that looks in 3 colums of an SQL database and returns any matches The code is basic i.e. SELECT * FROM Table WHERE Column1 LIKE %searcg% There is no validation of what goes into the text box and I am worried about SQL injection, what can I do to minimize the risk I have just tried the site and put in two single quotes as the search term, this crashed the script so I know I am vunerable. Can anyone help, perhaps point me in the direction of furthur resources on the subject? Thanks Ben
View Replies !
What Are Sql Injection Attacks And How To Prevent?
this is a question I put in the sql community in microsoft, but havent be answered in full ------------ I am using dynamic sql to do a query with differents 'order' sentences and/or 'where' sentences depending on a variable I pass to the sp ex: create proc ex @orden varchar(100) @criterio varchar(100) as declare consulta varchar(4000) set consulta=N'select pais from paises where '+@criterio' order by '+@orden ------------ I'd like to know it it uses 2 sp in the cache, as I read, the main sp and the query inside the variable of the dynamic sql. if so, as I imagine, then I suppose I have to do the main sp without any 'if' sentence to be the same sp, and so taking it from the cache and not recompile the sp now, I have various 'if' sentences in the main sp (the caller of the dynamic sql) but I plan to remove them and do the 'if' by program -it is in asp.net-, so I suppose it is better because in this way the main sp is took from the cache, supposing this uses the cache different that the dynamic sql in the variable what do u think? does the dynamic sql use 2 caches? if so, u think it is better to try to do the main sp same in all uses (no 'if' statements)? ----- They told me this coding is not good (dynamic sql) because it can give control to the user? I ask, how does it give control to use? what ar sql injection attack and how to prevent them? I use dynamis sql because I have 150 queries to do, and thought dynamic sql is good is it true that dynamic sql have to be recompiled in each execution? I suppose so only if the sql variable is different, right? can u help me?
View Replies !
Prevent DELETE And/or UPDATE
Hi all!Are there any other way than using rights or Triggers to prevent aDELETE or an UPDATE on a specific column.The "problem" with rights is that they dont apply to all DB-usersThe "problem" with triggers is that they generate lots of extraSQL-codeI would like a solution something like below. If there are anyprimitives like this or other more neat solutions I would be glad toknowCREATE TABLE some_table NO DELETE/* ^^^^^^^^^*/(some_column SOME_TYPE NO UPDATE/* ^^^^^^^^^*/)For clarity, here is a trigger that currently solves the problemCREATE TRIGGER check_updateable_columns ON some_tableFOR UPDATEASIF UPDATE(some_column)RAISERROR(...)GOorCREATE TRIGGER delete_not_allowed ON some_tableINSTEAD OF DELETEASRAISERROR(...)GO
View Replies !
Prevent One Single Row From Being Updated
I am doing customization for microsoft POS. I manually added a recordto a table. The manage and maintenance of this table are done by POS,and user can update the contents of this table. Is there any way I canlock this single row at database level to prevent it from being deletedor changed by user? I am using SQL 2000 and vb.net.Thanks.Leanne
View Replies !
Trigger To Prevent Duplicates
Hi all, I'm writing a trigger to prevent duplicates. I know that this can be done through primary key or unique constraints but in the real world my uniqueness is defined by 8 columns which is too a big an index to maintain on the primary / unique key. If I create a table with 2 columns CREATE TABLE Table1 (CentreCHAR(10), Month CHAR(3) ) Then create a trigger to prevent duplicates CREATE TRIGGER trigger_Check_Duplicates ON Table1 FOR INSERT, UPDATE AS -- This trigger has been created to check that duplicate rows are not inserted into AudioVisual table. DECLARE @IsDuplicate INTEGER -- Check if row exists SELECT @IsDuplicate = 1 FROM Inserted i, Table1 t WHERE t.Centre = i.Centre AND t.Month = i.Month IF (@IsDuplicate = 1) -- Display Error and then Rollback transaction BEGIN RAISERROR ('This row already exists in the table', 16, 1) ROLLBACK TRANSACTION END Then insert a row into the new table (no other data is in there) INSERT Table1 VALUES('0691040176','AUG') I get the Trigger error message that the row already exists. Why is this the case? I though that Table 1 (target table) would show no entries as it has no data - it should be a before image of the table and the inserted table should be an after image. Please help!!! Thanks Neill
View Replies !
Prevent ODBC By USER/APP
Is there a way to monitor all ODBC connections to a MSSQL server and prevent a username/ODBC combination. My problem is that we have many frontends for viewing reports, but we managed them all and users are not allow to make their own connections. Some users now uses MSAccess over ODBC to draw their own reports - they have all the permissions as neededd by the other apps. thanx
View Replies !
Prevent SQL/CLR Auto Deploy
Hi, I have a solution (VS 2005, C#) that includes a SQL 2005 CLR project. When I run the solution (in debug mode, and with a test harness in a different project in the solution set as the startup project) the IDE often wants to deploy my CRL assembly. How do I tell it NOT to try to do the deployment? (i.e. to only do it when I right-click the project and tell it to). Cheers,
View Replies !
Is That Possible To Prevent Modifying The Name Of An IDTSInputColumn90?
Hi, I'm building a custom SSIS data flow component and I create myself input and output columns from a custom property of my pipeline component. That's why I don't want the user to modify the name of the input and output columns by using the advanced editor. Is there a way either to make input/output column properties - at least the name - readonly or to override any PipelineComponent method to throw an exception like we do when we want to prevent the user from adding/removing input/output colulmns with methods like PipelineComponent.DeleteOutputColumn? Thanks for your help, David
View Replies !
Prevent Data Being Inserted Twice
I have a table with 3 columns: ID, Status, DateTime. I created a stored procedure to insert a staus value for each ID. This will run every hour. The DateTime stores the time, date when the Status was inserted. If the procedure was to be run a second time in hour window I do not want any Status to be inserted. Note: that I cannot rely on the procedure being run at exactly the right time - if it was scheduled to run on the hour (i.e at 1:00, 2:00, 3 :00 etc) but didn't run until 1:20 it sould still be able to run at 2:00. Does anyone know if there is anyway I can gaurd against this?
View Replies !
Prevent MS Access To Connect
Hello I'm facing a dilemma. I have quite a lot of users who need read access to data for analysis purposes. By granting them read access you also give them the option to connect to the database using MS Access which puts locks on the data. First I thought of generating stored procedures for all tables within a database those users need to query but when users execute a stored procedure with the name of the table, they get a resultset of all the data. They cannot filter the data by for example using select top 100* from usp_table where name like '%worf%' I'm sure I'm not the only one here but I don't see any alternative then grant them those rights. Thanks! Best Regards, Worf
View Replies !
Is It Possible To Prevent Databases From Being Copied?
Hi, We have a point of sale application (C# .NET 2.0) and a Sql Server 2005 database back end. Our customers are concerned that employees could create a backup of the SQL Server database (or even of the MDF file) and use it to steel customer data. Very often, the application is running on a single PC in a shop using Sql Server Express Edition 2005 under Windows XP. The users usually log on as local administrator. It's hard for us to force our customers to change their local security policies. Ideally, I would like some form of security mechanism that prevents a backup from being restored on to another PC without either a password or some other form of authentication. Is this possible? Regards, Sigol.
View Replies !
How To Prevent A Distributed Transaction?
I have a stored proc that performs some validations and returns a result set. I catch the result set in a calling procedure as follows: declare @tblErr (ErrType varchar(20), ErrMsg varchar(255)) insert @tblErr (ErrType, ErrMsg) exec dbo.spMyProc ...(args) Within the def of spMyProc there is a cross-server call: create procedure dbo.spMyProc (...params...) as begin declare @tblErr (ErrType varchar(20), ErrMsg varchar(255)) ...(do checking, inserts to @tblErr)... -- check other server exec @n = otherserver.mydb.dbo.spCheck ...(args) if @n != 0 insert @tblErr values ('someerr', 'somemsg') ...etc. select ErrType, ErrMsg from @tblErr end Apparently, the implicit transaction of the outer Insert statement is causing a distributed transaction to be started. There is no 'begin tran', distributed or non, and the foreign sp has no data-modifying statements. The call to spMyProc, if done from a query window, works fine, returning the desired resultset. When called from the outer proc, the call fails because the servers are not configured for distributed transactions. When performed without the cross-server call, using a copy of the remote db attached to the local server, the outer proc works fine. I do not want a distributed transaction. How can I prevent one? The local server is 2005 Standard on Server 2003, and the linked server is SQL2000 on Windows 2000 Server.
View Replies !
How To Prevent Ordering Of Records....
hello, i use VC# and sql server 2005. i create a table using the following command : create table history(name varchar(20) primary key); I insert records in a particular order.After all the records are inserted and when I try to retrieve the records, all of them are sorted in a ascending order.Is there any way to prevent them from being sorted. pls reply asap..... - Sweety
View Replies !
How To Prevent My Co-Workers From Accessing My SQL
Hi all In our office we have simple Network (LAN) and for some reason in each workgroup Computer in this network we have installed SQL-Server 2000. So far everything was ok but recently i noticed that my co-workers can easily access my Sql Server Instance through their Enterprise manager installed on their computers and then they can open my tables,view...and manipulate other objects. for better illustration i have created a Flash Movie from this process , please check the following Link : http://www.Parsisoftco.com/movie/Sql/Sql.htm How can i prevent others from doing so? Any help greatly Appreciated. Kind Regards.
View Replies !
|
TRACKER
