Primary Key Auto-increment Reset

Dec 14, 2007

I'm still looking for a solution on msdn, but i've decided also to post my question here.

How can i reset my primary key field auto-increment back to 0 in runtime (or in designtime)?

View 18 Replies


ADVERTISEMENT

Primary Key Auto-increment Reset

Apr 26, 2007

Ok - I have two tables that are relational. I have been inserted data into the tables because of testing. I also have been deleting data. My question is how do I reset the auto-incremented Primary key values.
For example:
Primary key of table one is bizID. Well there are only 3 record currently in the table. The bizIDs are 1-3. If I insert another record the bizID will be 88 because that was the next auto-incremented number. I obviously deleted the other records. I want to start the primary key value over from zero. How do I accomplish this? thnks

View 2 Replies View Related

Reset The Auto Increment Columns In MSDE

Oct 24, 2001

Can Ne1 tell me how to reset the auto increment colum of a table in the Microsoft Data Engine??, Does ne1 know where to find a free MSDE administration utility.

View 1 Replies View Related

Auto Increment An Primary Key

Jun 26, 2007

How do I make a Primary Key in a table automatically increment as a new row of data is entered? do i have to do it with a trigger?? if so what is the code behind it....what I have is a Applicant table, which holds the ApplicantID (<<<needs auto incremented), FirstName, LastName, Address, City, State, Zip, and PhoneNumber.  I enter all the other information through visual web developer, and what I need to do when the hit submit on the form with the data i want to automatically set an id right there.  any suggestions will help!

View 3 Replies View Related

Auto-increment My Primary Key: Why 2 Instead Of 1?

Dec 21, 2007

Hi all,I have a table where I have my ProdPK set up as Primary key, turned on "Is Identity" and set the Identity increment to 1. But each time I add a new item, the number incremented by 2... I have couple of other tables and they are all fine, just this particular table increased twice as it should. I check the setting against other tables and everything seems to be the same. By the way, this is adding the data to the table inside MS SQL Server Management Studio manually. I haven't done anything in the ASP.NET page yet. Thank you very much,Kenny. 

View 5 Replies View Related

Auto Increment Primary Key

Apr 13, 2008

Dear all,
I am using SQL express 2005 in visual studio 2008. I would like to use Form View to insert new record in the table. There is a column call "id". I think it is too stupid to let user enter a unique identifier instead of generating by the system.
I know how to generate a random integer number in a normal TextBox. However, when I edit the InsertItemTemplate, I cannot modified the value of that textbox. For example, i couldn't use "TextBox1.Text = temp;" here. How can I achieve to change this TextBox's value by the system that I would like to generate a random interger. Thanks a lot.
Regards,
Eric Chan 

View 4 Replies View Related

Auto Increment Primary Key

Dec 7, 2004

How do I make my Primary Key Auto Increment from Enterprise Manager?

Thanks

View 1 Replies View Related

How To Auto Increment A Primary ID Field?

Oct 8, 2006

I was just wondering on a very simple database table with lets say a primary key set to columb ID and another columb lets say products, can you make the primary key automaticly increment its self whenever a new entry has been put in?For instance say I have this table set up with ID Being the primary KEY, Columb 1 = ID( INT ), Columb 2 = Products ( VarChar(50) ), and have the fields ID = 1, and products = my product.....and if a user inserts a new record say from a gridview or some sort of data entry the second ID Feild will automaticly be  2 and the products gets updated per user input.......I'm very sorry but I'm having a hard time putting this into words for some reason..umm basicly user adds something into the products feild and the ID field automaticly increments one number higher from the last one?ThanksAdam.

View 4 Replies View Related

How To Auto Increment An Alphanumeric Primary Key In SQL? :(

Aug 6, 2007

 How to auto increment an alphanumeric Primary Key in SQL? :( Because I want to add something like this in the Primary Key, for example i'll add a new data with an alphanumeric value of ABC-0001, then I'll add another 1, and it auto increments to ABC-0002 and so on.. How can I do it? And if I'll add a new alpha character in the Primary Key field, for example DEF-0001, then I'll add another and it auto increments to 002, and so on, and it will go back to 0001 if i'll use another combination of alpha characters. for example, i'll add a new alpha character AAA, will it go back to 0001 or it will continue? T___T I hope u get my point.. I want my table to look like this if i have added the dataABC-0001ABC-0002DEF-0001DEF-0002AAA-0001then if il add a new 1, for example ABCit will auto increment to 0003 in the same field, it will look like this after addingABC-0001ABC-0002ABC-0003DEF-0001DEF-0002AAA-0001Will it be possible? :( 

View 4 Replies View Related

How To Auto-increment Primary Key When Adding A New Row Using Update Method?

Jul 26, 2007

Hi guys,I followed the ASP.net official tutorial to create a DAL & Business Logic Layer (http://www.asp.net/learn/dataaccess/tutorial02cs.aspx). I have a table with a int ID field. I wish to write a function to add a new entry into this table but have the ID field auto-increment.The ID field is set as the Identity Column and has a Identity Increment & Seed of "1". If I manually go to the table and insert a new record leaving the ID value null it automatically increments. But if I create a C# function to add a new entry I get an error saying that the ID field can't be Null. Is there any way to use the Update method as shown on line 14 below to add a new entry but with it automatically incrementing? I did create a function called InsertDevice that simply inserts the other fields using a SQL INSERT and it auto-increments fine, just wondering if there is a way to do it using the DataTable and the Update method? Thanks for any help!!!  1 public bool AddDevice(string make, string model)
2 {
3 //cannot have the same device entered twice!
4 if (Adapter.FillDeviceCountByMakeModel(make, model) == 1)
5 return false;
6
7 RepositoryDataSet.DevicesDataTable devices = new RepositoryDataSet.DevicesDataTable();
8 RepositoryDataSet.DevicesRow device = devices.NewDevicesRow();
9
10 device.make = make;
11 device.model = model;
12
13 devices.AddDevicesRow(device); << Error thrown Here!
14 int rows_affected = Adapter.Update(devices);
15
16 return rows_affected == 1;
17 }
  

View 3 Replies View Related

Transact SQL :: Set Fields To Auto Increment Primary Keys In Bulk

Aug 4, 2015

I have imported a whole bunch of tables. Most of them have an ID (int) column. Is there a way to set the ID columns across all tables to auto increment Primary Keys in bulk?

View 11 Replies View Related

Createing Column Primary Key And Contains Of 3 Characters And 6 Auto Increment Numbers (example: DLL - 123456) (

Dec 28, 2007

i would to make a column contains of 3 characters and 6 auto increment numbers (example: "DLL - 123456")

and made it primary key and which data type i should use. i do not know whether i use after insert trigger in two columns one for three characters and another for code which has identity property >>>so please help me

View 4 Replies View Related

Need To Have 2 Auto Increment Columns (Seed, Increment)

Dec 11, 2007

Hello,

I Have a table that needs to have 2 unique number.

detail_id and detail_print_id.

detail_id is already an IDENTITY.

both fields need to be different, because when importing, it imports the same data into a table twice, with only a slight data change (and id is not one of the changes).

So I thought i could do the following:

detail_id INT NOT NULL IDENTITY(1,2),
detail_print_id INT NOT NULL IDENTITY(2,2),
--blah blah

that way, the detail_id will always be odd, and the detail_print_id will always be even. however SQL Server 2005 only allows 1 identity per table, and both these fields need to be auto generated when the field is inserted, so as to prevent double data.

is there anyway I can create a int column to auto increment, without the column being an IDENTITY??

also, I would prefer to not have to create a second table with a single column just for this work.

Thanks,
Justin

View 5 Replies View Related

Auto Increment Auto Non-identity Field

Jan 23, 2004

I have an MS SQL Server table with a Job Number field I need this field to start at a certain number then auto increment from there. Is there a way to do this programatically or within MSDE?

Thanks, Justin.

View 3 Replies View Related

Reset The Identity Increment

Jul 20, 2005

Reset the Identity IncrementHello:I have a table with a bigint type column (field) that has an identity seedof 1 and an identity increment of 1. The column is the primary key for thetable.After I backup and clean out the database (delete all of the data in the DB)I need to have the column with the identiy seed/increment value reset to 1automatically. (start counting at 1 again). How does one do that, becauseas it is now, the DB keeps increasing the value of the column from where itleft off, regardless of the fact that I deleted all of the data in thetable.The DB is MS SQL Server 2000.Thanks and appreciate any help.Ryan Kennedy

View 2 Replies View Related

Reset Increment Seed

Sep 10, 2007

I'm still in the development stage and am frequently deleting all data from all tables and then filling those tables anew. However, the increment seed for identifying fields doesn't reset to 1 (or 0--not sure which). While not important for operation of the database, I would prefer that the field identifiers start with 1 when I am ready to release the database for operation. Is there a way to do this?

I can generate scripts to rebuild the database structure to do this, but scripts aren't generated for database diagrams and the graphical representation of the table structure is very useful.

View 4 Replies View Related

SQL Server Mobile - Reset Increment

Sep 4, 2006

I can't seem to find a way to reset the auto increment fields in my SQL Server Mobile database table.

Are there any SQL statements I can call in order to do this?

I'd rather not have to drop and then re-create the database.

Any help much appreciated

View 8 Replies View Related

Reset Auto-Id

Nov 1, 2000

Can I reset the Auto_ID column in a table to start from 1 again?

Thanks

View 1 Replies View Related

Auto Increment

Mar 24, 2008

 DIAGID is the
field in database which is integer. i want to increment this when page is
loaded.but it is not working..

plz
find mistake ... thanks in advance

 

SqlCommand sqlCmd = new SqlCommand("Select max(DIAGID)  from tblDxactual",
sqlCon);

       
SqlDataReader sqlDr;

       
sqlCon.Open();

       
sqlDr = sqlCmd.ExecuteReader();

       
if (sqlDr.Read())

       
{

           
txtbxDiagID.Text = sqlDr[0].ToString()+ "1"
;    

       
}

       
else

        
txtbxDiagID.Text="1";

       
sqlCon.Close();

View 3 Replies View Related

MS-SQL: Where's Auto Increment?

Feb 4, 2005

It's been a long time since I've had to check an index for the highest value, then add 1, to create a new unique key. These past few years, it seems this is usually done for you. But now that I'm working with MS-SQL, I don't see it. Is it there? It's doesn't seem to be inherent in the definition.

View 5 Replies View Related

MS SQL 05 Auto Increment

Jan 26, 2006

Hello,
Firstly Hello to everyone I'm new the forum and fairly new to .net
I'm working on web datbase application using visual studios 05 and MS SQL05 I've used 2003 (briefly) before but 2005 is very new to me.
To my problem I download the GUI interface from microsoft so I can now setup a local database and do my own testing.
I have created the table and fields with in it however on a particular table i have made a primary Key and left it as an INT but I would like to set it as auto increment ! I dont know how to select that option as i was used to mysql way of doing things or does this have to be done as a stored procedure ?
Any assistance much appreciated.
 

View 1 Replies View Related

Auto Increment.... Key&#39;s... Etc..

Apr 4, 2001

I am very new to using SQL server 7. I've always used mysql in the past. I cant figure out howto create a autoincrementing key for my tables... is it possible to do in SQL7?? If so.. how.. i thought you just set the datatype to auto increment etc...

sorry for any oversights...


dave

View 1 Replies View Related

Auto Increment

Sep 23, 2002

I would like to avoid using a cursor. I am updating several rows in a table with sequential numbers starting at a number I pass into the Stored Procedure. Is there a way to do this with one update statement?

Thanks,
Ken Nicholson
Sara Lee Corporation

View 3 Replies View Related

Auto-Increment

May 30, 2008

Hey,

Here is what happened:

Users for a long time have been able to post new topics in our forums. However, a short time ago, the some users began to experience problems. What I have narrowed it down to is that upon inserting into the table, sometimes id value for the topic is the same as an id that is already in the table, so it fails to insert the record (due to a constraint). However, the topic id column is an auto-increment column and should just assign the next number for the id value.

Any ideas?

View 3 Replies View Related

Auto Increment

Mar 15, 2006

I have important a table from mircosoft access into ms sql server 2000, I've created a new ID row and set the primary key - but I need to use the ID from microsoft access as well. therefore I'd like to add an auto increment +1 on the old access ID field... but how do I do that?

View 1 Replies View Related

Please Tell Me How To Auto Increment

Nov 6, 2006

hi, i have columns(name,id,salary) in my emp table,see to that there is no primary key in my table, but i want to do auto increment, in my table id has to be auto incremented,so please give me coding to do that,pleaseeeeeeee

View 3 Replies View Related

Auto Increment

Apr 14, 2008



Hi,
I have one table:
Appid | Cols
1 | xx
2
3

In this table Appid is the primary key. I want to change the Appid column as Auto increment column. How to change the appid to Auto increment with data in that column. Is it possible?

Thanks in advance

View 4 Replies View Related

Auto Increment In SQL

Jul 25, 2007

Hi.
Am creating a database in SQL and one of the field of my table is customer_id. I want this customer_id to be auto generated and auto increment. I was reading about Identity but it was too complicated to grasp. So how can that be done in a very simple way.
Thanks

View 9 Replies View Related

Regarding Auto Increment Of Id In Sql Table

Jun 27, 2007

I currently working asp.net with c# and inserting data from webpage into sqlserver 2000 data table. I have an auto increment ID in a table. Let's say 10 are inserted. Then you delete those 10. You add another and the auto increment sets the id at 11. How can I get that table to start back to 0? Plz help me and give code for increment id programmatically using c#. Thanks in Adv,

View 2 Replies View Related

[*-)] About Auto Increment Field

Nov 27, 2007

Hi,
I have one Auto increment field in the table.
I have a problem that suppose I have 10 Records in the table, Now If someone delete record no 3 and 5 then it has 8 records.
But The field will give 11 no to new record I want it first fill 3 and 5 then give 11 to the new record.
Is it possible with the auto increment field in sql server 2005.
 

View 1 Replies View Related

Auto Increment Field

Apr 5, 2008

Hey,
Im building a site within Visual Studio 2005 and im using the SQL database system it provides. I currently have a number of tables each with a primary key that is set to the 'int' field type and also set to auto increment 1, 2, 3 etc etc. My question is it there a way to make this field increment automatically, providing a unique value but also automatically placing a couple of pre-defined letters before the number? Obviously it can't be an 'int' anymore because it'll be holding something like MEM1, MEM2 etc. Is there a way to do this is Visual Studio?
 Many Thanks!

View 3 Replies View Related

Auto-increment In MSDE

Oct 19, 2005

ive been working through the tutorial/tour of .net web matrix (version
0.6 build 812).  when creating my database i cannt find the option
for setting an auto increment for my primary key.  can anyone help?

thanks
slh

View 1 Replies View Related

How Do I Create An Auto Increment?

Apr 29, 2006

Hi all
 
I just got SQL server 2k5 installed and working....im just trying to figure out how to make an auto incremement column wiht an integer..
 
or has it been replaced with the "unique identifyer"
 
 
Abyss

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved