Tracking Forums, Newsgroups, Maling Lists
Home Scripts Tutorials Tracker Forums
  Advanced Search
  HOME    TRACKER    MS SQL Server






SuperbHosting.net & Arvixe.com have generously sponsored dedicated servers and web hosting to ensure a reliable and scalable dedicated hosting solution for BigResource.com.







Problem Loading Data From FlatFile Source Data For Column Overflowed The Disk I/O Buffer


 

Hi  i am trying to do a straight forward load from a Flatfile source , i have defined the columns according to the lenghts defined in the Data Dictionary Provided  but when i am trying to run the Task i am encounterring this error
 
The column data for column "Column 20" overflowed the disk I/O buffer.
 
I tried to add another column 21  at the end and truncate or leave that column unmapped to destination but the same problem occurs for column 21  what should i do  to over come this .
 
In case of Bad Data  how to clean up the source.. Please help me with this
 
 
 
 
 

 
 
 


View Complete Forum Thread with Replies
Sponsored Links:

Related Messages:
[Flat File Source [8885]] Error: The Column Data For Column &&"CountryId&&" Overflowed The Disk I/O Buffer.
 
Hi everyone,
I am using SSIS, and I got the folowing error, I am loading several CSV files in a OLE DB, Becasuse the file is finishing and the tak dont realize of the anormal termination, making an overflow.
So basically what i want is to control the anormal ending of the csv file.
 please can anyone help me ???
 
I am getting the following error after replacing the '""' with '|'.
The replacng is done becasue some text sting contains  "" wherein the DFT was throwing an error as " The column delimiter could not foun".
 
[Flat File Source [8885]] Error: The column data for column "CountryId" overflowed the disk I/O buffer.
[Flat File Source [8885]] Error: An error occurred while skipping data rows.
[DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (8885) returned error code 0xC0202091.  The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
 
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
 
[DTS.Pipeline] Error: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
 
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0047039.
 
[DTS.Pipeline] Information: Post Execute phase is beginning.
 
apprecite for immediate response.
 
Thanks in advance,
Anand
 

View Replies !   View Related
Column Overflowed The Disk I/O Buffer
Hi everyone,
I am using SSIS, and I got the folowing error, I am loading several CSV files in a OLE DB, Becasuse the file is finishing and the tak dont realize of the anormal termination, making an overflow.
So basically what i want is to control the anormal ending of the csv file.
 please can anyone help me ???
 
[DTS.Pipeline] Error: Column Data for Column "Client" overflowed the disk I/O buffer
[DTS.Pipeline] Error: The PrimeOutput method on component "Client Source" (1) returned error code 0xC0202092.  The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
 
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
 
[DTS.Pipeline] Error: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
 
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0047039.
 
[DTS.Pipeline] Information: Post Execute phase is beginning.
 
Thanks a lot
J

View Replies !   View Related
Problem Loading Data From FlatFile Source
Hi i am trying to do a straight forward load from a Flatfile source , i have defined the columns according to the lenghts defined in the Data Dictionary Provided but when i am trying to run the Task i am encounterring this error



The column data for column "Column 20" overflowed the disk I/O buffer.


I tried to add another column 21 at the end and truncate or leave that column unmapped to destination but the same problem occurs for column 21 what should i do to over come this .



In case of Bad Data how to clean up the source.. Please help me with this

View Replies !   View Related
SSIS ERROR : Overflowed The Disk I/O Buffer, DTS_E_PRIMEOUTPUTFAILED
Hi,
I get folllwing error while SSIS package is executing and uploading Data from Flat Files to SQL Server 2005. This Error goes away when I change my SSIS Package Connection Manager to read UNICODE data files.
Is there any smart way to figure out which flat files have UniCode Data  in the and which is not a Unicode data file.

Thanks,
Vinod


Information: 0x402090DC at Upload EP Data, DAT File Reader [1]: The processing of file "C:Data2EP05PF2000002_070412_002921.dat" has started.
Information: 0x4004300C at Upload EP Data, DTS.Pipeline: Execute phase is beginning.
Error: 0xC020209C at Upload EP Data, DAT File Reader [1]: The column data for column "SYSTEM_LOCKED" overflowed the disk I/O buffer.
Error: 0xC0202091 at Upload EP Data, DAT File Reader [1]: An error occurred while skipping data rows.
Error: 0xC0047038 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on component "DAT File Reader" (1) returned error code 0xC0202091.  The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED.  Thread "SourceThread0" has exited with error code 0xC0047038.  There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADCANCELLED.  Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.  There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Upload EP Data, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED.  Thread "WorkThread0" has exited with error code 0xC0047039.  There may be error messages posted before this with more information on why the thread has exited.
Information: 0x40043008 at Upload EP Data, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Upload EP Data, DAT File Reader [1]: The processing of file "C:Data2EP05PF2000002_070412_002921.dat" has ended.

View Replies !   View Related
Data For Source Column Is Too Large For The Specified Buffer Size...
Hello there,I have and small excel file, which when I try to import into SQlServer will give an error "Data for source column 4 is too large forthe specified buffer size"I have four columns in the excel file, one of the column contains alarge chunk of data so I created a table in SQL Server and changed thetype of the field to text so I could accomodate this field but stillno luck.Any suggestions as to how to go about this.Thanks in advance,Srikanth pai

View Replies !   View Related
Data For Source Column 3('Col3') Is Too Large For The Specified Buffer Size.
 
Hi,
 
I have a problem to import xls file to sql table, using MS SQL 2000 server.
Actual main problem associated with it is xls file contain one colum having large amount of text which length is approximate 1500 characters.
I am trying to resolve it through like save xls to csv or text file then import but it also can not copy whole text of that column, like any column in xls having 995 characters then text or csv file contain 560 characater. So, it is also wrong.
 
thanks in advance, if any try to resolve

View Replies !   View Related
DTS Error: Data For Source Column 2 (‘column_name) Is Too Large For The Specified Buffer Size.
Hi,
 
I’m attempting to use DTS to import data from a Memo field in MS Access (Jet 4.0 OLE DB Provider) into a SQL Server nvarchar(4000) field.  Unfortunately, I’m getting the following error message:
 
Error at Source for Row number 30. Errors encountered so far in this task: 1.
Data for source column 2 (‘Html’) is too large for the specified buffer size.
 
I also get this error message when attempting to import the same data from Excel.
 
Per the MS Knowledgebase article located at http://support.microsoft.com/?kbid=281517, I changed the registry property indicated to 0.  This modification did not help. 
 
Per suggestions in other SQL Server forums, I moved the offending row from row number 30 to row number 1.  This change only resulted in the same error message, but with the row number indicated as “Row number 1â€?.  (Incidentally, the data in this field is greater than 255 characters in every row, so the cause described in the Knowledgebase article doesn’t seem to be my problem).
 
You might also like to know that the data in the Access table was exported into this table from a SQL Server nvarchar(4000) field.
 
Does anybody know what might trigger this error message other than the data being less than 255 characters in the first eight rows (as described in the KB article)?
 
I’ve hit a brick wall, so I’d appreciate any insight.Thanks in advance!

View Replies !   View Related
Script Component As Source: The Value Is Too Large To Fit In The Column Data Area Of The Buffer.
In my quest to get the Script Component as Source to work, I've come upon an error that says "The value is too large to fit in the column data area of the buffer.".  Of course, I went through the futile attempt to get debugging to work.  After struggling and more searching, I found that I need to run Dts.Events.FireProgress to debug in a Script Component.  However, despite the fact that the script says:





Code Block
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime
 
...
 
Dts.Events.FireProgress..
 
 


 

I get a new error saying: Error 30451: Name 'Dts' is not declared.  Its like I am using the wrong namespace, but all documentation indicates that Microsoft.SqlServer.Dts.Pipeline.Wrapper is the correct namespace.  I understand that I can use System.Windows.Form.MessageBox.Show, but iterating through 100 items makes this too cumbersome.  Any idea what I may be missing now?
 
Thanks,
 
John T

View Replies !   View Related
Loading Data Using Ole Db Source With Input Source Being A View
I was trying to load data using SSIS, Data Flow Task, OLE DB Source, source was a view to a OLE DB Destination (SQL Server).  This view returns 420,591 rows from Query Analyzer in 21 seconds.  Row length is 925.  When I try to executed the Data Flow Task from SSIS, I had to stop the process after 30 minutes, because only 2,000 rows had been retrieved.  I modified the view to retun top 440, 000 and reran.  This time all 420, 591 rows were retrieved and written in 22 seconds.  Next, I tried to use a TOP 100 Percent.  Again, only 2,000 rows were return after 30 minutes.  TempDB is on a separate SAN Raid group with 200 gig free, Databases on a separate drive with 200 gig free.  Server has 13 gig of memory and no other processes were executing.
 
The only way I could populate the table was by using an Execute SQL Task and hard code an Insert into table selecting data from the view (35 seconds) from SSIS.
 
Have anyone else experience this or a similar issue?  Anyone have a solutionexplanation?

View Replies !   View Related
The Value Is Too Large To Fit In The Column Data Area Of The Buffer.
I am getting the following error on my SSIS package.  It runs a large amount of script components, and processes hundred of thousands of rows.

The exact error is: The value is too large to fit in the column data area of the buffer.

I redirect the error rows to another table.  When I run just those records individually they import without error, but when run with the group of 270,000 other records it fails with that error.  Can anyone point me to the cause of this issue, how to resolve, etc.

Thanks.

View Replies !   View Related
Value Is Too Large To Fit In Column Data Area Of The Buffer
When executing the Script Task, I get the error shown here:

http://www.webfound.net/buffer.jpg

I'm not sure how to resolve this.

http://msdn2.microsoft.com/en-us/library/microsoft.sqlserver.dts.pipeline.buffercolumn(SQL.90).aspx

http://msdn2.microsoft.com/en-us/library/microsoft.sqlserver.dts.pipeline.buffercolumn.maxlength(SQL.90).aspx

how do I change the maxlength of the buffer...if, that is the problem here?

View Replies !   View Related
The Value Is Too Large To Fit In The Column Data Area Of The Buffer.
Can someone tell me how to access the MaxLength property of a data column so I can figure out where the problem is?

Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)

Try

Row.PrimaryDiagnosis = Mid(Row.DiagnosisCode, 1, 8)

Catch ex As Exception

Row.Comments = "Error copying DiagnosisCode: <" + Row.DiagnosisCode + ">. " + ex.Message

End Try

Output = <aaaaa >

Thanks,

Laurence

 

View Replies !   View Related
The Value Is Too Large To Fit In The Column Data Area Of The Buffer?
 

I have a variable nvarchar(1000) that I ma reading into the buffer of a data flow task in the script component script task. It gives me this error:
"Script component exception.........The value is too large to fit in the column data area of the buffer."
 
I looked at the BufferColumn members and tried to set the maxlength to 1500. But it does not help.
 
What is  the solution?

View Replies !   View Related
Loading XML Data Into Relational Tables From XML Datatype Column
This may seem like a redundant exercise, but in SSIS I am loading a single table with XML files into an XML Datatype column.  I have already successfully loaded the file directly into relational tables using the XML Source and SQL Server destination.  But during the transformations, we clean the data and if there are research questions, we have to go back to the original XML data file and search on it.  I want to store this file in the database as well to facilitate easier searching.

With this approach I'm hoping to accomplish a few goals:

1) Reduce the size of storage, assuming the SQL Datatype column will compress the data making it smaller than the original file.  Then I can take the original file and store it offline on disk or tape.

(update: Well, my assumption for goal #1 was correct.  The total size of all 1,990 files was 12.6G, while the files loaded into SQL consumed 8.2G, a reduction of 35%  But this isn't anywhere near the compression used by WinZip which reduced all files to < 1G which averaged around 95% compression for each file.)

2) Parse out the XML File from the table (as opposed to directly from the file) into other relational tables, hoping the speed of this operation will be equally or better performing than reading from the XML file itself.

3) Use XML Schema collections to validate the files as they are loading.

So with those goals in mind, can anyone comment on my assumptions or approach to this?

Also, I've bound the schema collection to the XML Datatype field, but I have multiple schemas in my collection and I can't find a property on the table that binds the specific schema to the field.  Should I break my collection into 4 types (for the four types of XML files being loaded)?

Also, in SSIS what will be the most efficient way to load each row (1 row = 1 data file, containing possible 1,000,000 rows of data) into a relational table?  SQL XML Query?  Is there a 3rd party control for this that anyone knows of?

Last question: How do annotated schemas play into this scenario?  Do I need to use them at some point?

Thanks for any information.

Kory

View Replies !   View Related
Trouble Loading Binary Data Using DT_BYTES Column
I am using SSIS to load a flat file into a SQL Server 2005 database.  One of the columns in the flat file data is a 50-byte binary string defined as DT_BYTES which needs to be loaded into a database column defined as binary(50).  I am reading the flat file in fixed-width mode, so as to avoid the possibility of the binary data introducing additional unexpected column or line delimiters.

I am developing the package on a Windows XP Pro SP2 machine.  The SQL Server 2005 instance is located on a server running Windows Server 2003 Standard SP1.

I am able to run the package successfully from my local machine, importing all columns and records into the database.  I can run the package directly from within Business Intelligence Development Studio.  I can also deploy the package to the SQL Server machine and run the package that way from my local machine.  If, however, I attempt to run the same package from the server, either interactively or using SQL Agent, it chokes specifically on the binary column. 

Here is the error message generated when the package is run from the server:


Data conversion failed. The data conversion for column "COL_BIN_50" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".

The package successfuly runs from the server if I ignore the binary column in the SSIS package.

Has anyone else encountered this behaviour?  Does it seem to be operating system related?

 

View Replies !   View Related
Conversion Failed Because The Data Value Overflowed The Specified Type
Hi All,
 
I am facing very weird issue...
 
When i am running package thru SQL server job and getting follwing error:
 
SIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.  An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80004005  Description: "Invalid character value for cast specification".  An OLE DB record is available.  Source: "Microsoft SQL Native Client"  Hresult: 0x80004005  Description: "Invalid character value for cast specification". 
There was an error with input column "Billing_date" (2568) on input "OLE DB Destination Input" (979). The column status returned was: "Conversion failed because the data value overflowed the specified type.". 
SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.  The "input "OLE DB Destination Input" (979)" failed because error code 0xC020907A occurred, and the error row disposition on "input "OLE DB Destination Input" (979)" specifies failure on error. An error occurred on the specified object of the specified component.  There may be error messages posted before this with more information about the failure. 
SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "billing_table" (966) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information about the failure. 
SSIS Error Code DTS_E_THREADFAILED.  Thread "WorkThread0" has exited with error code 0xC0209029.
 
In the package, i am selecting data from SQL Server database into query(billing_table) and inserting data using destination task into SQL server table(stg_billing_table). Both table has same data type datetime for Billing_date.
 
Here are couple of points:
 
1) When i am trying to execute same insert statement thru SQL Server editor, it is running successfully.
 
INSERT INTO stg_billing_table (Billing_date)
SELECT Billing_date FROM stg_billing_table;
 
2) When I am running package from Solution explorer then also it works fine.
 
Issue only comes when i try to run package thru SQL server job. one point, There are lot of other task running parallel to this package when we run thru JOB.
 
One more thing which i have observed that when i tried to see input transformation datatype for same column in package, it is DT_DATABASETIMESTAMP. Well i am not able to understand that it may be potential issue because if it is related to DT_DATABASETIMESTAMP to date time conversion then we should have faced this issue while running thru solution IDE.
 
Issue looks related to database level buffer/ Memory overflow etc. to me. Can somebody help me understanding the issue?
 
Thanks.
 
 

View Replies !   View Related
Conversion Failed Because The Data Value Overflowed The Specified Type
Hi all,
 
I have a problem while transforming data from an Access DB to an SQL 2005 DB.
 
Context:
 
- Migration of packages from SQL 2000 to SQL 2005
- DB SQL 2005 is a back up from SQL 2000
- The access DB is the same than the one used with SQL 2000
 
Error:
 
[OLE DB Source [1]] Error: There was an error with output column "ID" (32) on output "OLE DB Source Output" (11). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
 
Access Source:
 


tblSource


ID
DateID
ConfigIDRequest
FromTime
ToTime


43221
01.01.2007
362
00.00
05.30

43233
01.01.2007
362
21.10
23.59

43234
01.02.2007
362
00.00
05.30

43244
01.02.2007
362
21.10
23.59

43247
01.03.2007
362
00.00
05.30

...
 
SQL Destination:
 




Destination table
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[tblDestination](
[ID] [int] NOT NULL,
[DateID] [nvarchar](10) NULL,
[ConfigIDRequest] [int] NULL,
[FromTime] [nvarchar](5) NULL,
[ToTime] [nvarchar](5) NULL
) ON [PRIMARY]
 
 
SSIS Package description:
 
- Control Flow:

* Data Flow Task
- Data Flow:

* OLE DB Source pointing to tblSource, using AccessCon
* OLE DB Destination pointing to tblDestination, using SQL2005Con
- Connections:

* AccessCon : Native OLE DBMicrosoft Jet 4.0 OLE DB Provider pointing to AccessSource.mdb
* SQL2005Con : Native OLE DBMicrosoft OLE DB Provider for SQL Server
 
NB: All those components are default configured
 
Previous tests executed:
 
1. OLE DB Source Preview : OK, same records.
2. Error redirection to flat file for ID column : here are the first records
 



ErrorOutput.txt
ErrorCode,ID,DateID,ConfigIDRequest,FromTime,ToTime, ErrorColumn
-1071607691,43221,01.01.2007,362,00.00,05.30,32
-1071607691,43222,01.01.2007,363,05.30,05.50,32
-1071607691,43223,01.01.2007,366,05.50,06.20,32
-1071607691,43224,01.01.2007,370,06.20,12.20,32
-1071607691,43225,01.01.2007,365,12.20,13.00,32
 
 
3. Execute the transformation on the SQL2000 server, for the same Access DB, to the initial SQL 2000 DB : OK, no error.

 
Questions:
 
- Do you have an idea of what differs between SQL2000 and SQL2005 in this kind of situation?
- Why is this working for 2000 and not 2005?
- Why the error message says "output column "ID" (32) on output "OLE DB Source Output" (11). ". Shouldn't it be something like "output column "ID" (32) on input "ID" (11). " (with the second ID column for the SQL DB).
- May be the error comes from my connections parameters, one parameter which doesn't exists in SQL2000?
 
Thanks,
 
Romain

View Replies !   View Related
Design For Loading Data Without Knowlged Of Datatype Or Column Count
I am loading data from an external source into SQL Server via ASP.NET/C#. The problem is that I do not necessarily know the data types of each column coming in, perhaps until a user tells the application, which might not occur until after the data is loaded. Also, I cannot anticipate the number of columns coming in. What would table design look like?
Would you use a large table with enough columns (e.g. Column1, Column2, etc.) reasonable enough to accomodate all the columns that the source might have (32?), and use nchar as the datatype with the plan to convert/cast when I use the data? Isn't the cast kind of expensive?
Does this make sense? Surely other foplks have run into this....
My thanks!
 
 

View Replies !   View Related
An Error Has Occurred During Report Processing. A Data Source Instance Has Not Been Supplied For The Data Source &&"DetailDS_get_o
hi ,
 
       i am trying for a drill through report (rdlc)
 
        ihave written the following code in drill through event of reportviewer, whenever i click on the first report iam getting the error like  

An error has occurred during report processing.


A data source instance has no
t been supplied for the data source "DetailDS_get_orderdetail".







the code is

 

using System;

using System.Data;

using System.Data.SqlClient;

using System.Configuration;

using System.Collections;

using System.Web;

using System.Web.Security;

using System.Web.UI;

using System.Web.UI.WebControls;

using System.Web.UI.WebControls.WebParts;

using System.Web.UI.HtmlControls;

//using Microsoft.ApplicationBlocks.Data;

using Microsoft.Reporting.WebForms;

using DAC;

public partial class _Default : System.Web.UI.Page

{

protected void Page_Load(object sender, EventArgs e)

{

ReportViewer1.Visible = false;

}

protected void Button1_Click(object sender, EventArgs e)

{

DAC.clsReportsWoman obj = new clsReportsWoman();

DataSet ds = new DataSet();

ds = obj.get_order();

ReportViewer1.LocalReport.DataSources.Clear();

ReportDataSource reds = new ReportDataSource("DataSet1_get_order", ds.Tables[0]);



ReportViewer1.LocalReport.DataSources.Add(reds);

ReportViewer1.LocalReport.ReportPath = "C:/Documents and Settings/km63096/My Documents/Visual Studio 2005/WebSites/drillthrurep/Report.rdlc";

ReportViewer1.LocalReport.Refresh();

ReportViewer1.Visible = true;

}

protected void ReportViewer1_Drillthrough(object sender, DrillthroughEventArgs e)

{

DAC.clsReportsWoman obj = new clsReportsWoman();

ReportParameterInfoCollection DrillThroughValues =

e.Report.GetParameters();

 

foreach (ReportParameterInfo d in DrillThroughValues)

{

Label1.Text = d.Values[0].ToString().Trim();

}

LocalReport localreport = (LocalReport)e.Report;

string order_id = Label1.Text;

DataSet ds = new DataSet();

ds = obj.get_orderdetail(order_id);



ReportViewer1.LocalReport.DataSources.Clear();

ReportDataSource reds = new ReportDataSource("DetailDS_get_orderdetail", ds.Tables[0]);

ReportViewer1.LocalReport.DataSources.Add(reds);

ReportViewer1.LocalReport.ReportPath = Server.MapPath(@"Reportlevel1.rdlc");

ReportViewer1.LocalReport.Refresh();

 



}



}
 
the code in method get_orderdetail(order_id) is
 
public DataSet get_orderdetail(string order_id)
        {
            SqlCommand cmd = new SqlCommand();
            DataSet ds = new DataSet();
            cmd.Parameters.Add("@order_id", SqlDbType.VarChar, 50);
            cmd.Parameters["@order_id"].Value = order_id;
            ds = SQLHelper.ExecuteAdapter(cmd, CommandType.StoredProcedure, "dbo.get_orderdetail");
            return (ds);
        }pls help me.

View Replies !   View Related
Sql Reporting Services : Error - A Data Source Instance Has Not Been Supplied For The Data Source
I am using winforms with c#, sql server 2005.
 
I havs designed a report using Sql Reporting Services.
 
when i call the report in winform-> reportviewer the reportviewer shows
'A data source instance has not been supplied for the data source  MentisDataSet_SelectEmpPF'
 
i have written the the code as

 
 

private void Form1_Load(object sender, EventArgs e)

{

MentisDataSet ds = new MentisDataSet();

SqlDataAdapter da = new SqlDataAdapter("select * from SelectEmpPF", new SqlConnection(WindowsApplication1.Properties.Settings.Default.MentisConnectionString));

da.Fill(ds, "MentisDataSet_SelectEmpPF");

 

this.SelectEmpPFTableAdapter.Fill(this.MentisDataSet.SelectEmpPF);

SelectEmpPFBindingSource.DataSource = ds;

this.reportViewer1.ServerReport.ReportPath = "report1.rdlc";

this.reportViewer1.RefreshReport();



 

}

View Replies !   View Related
Data Source Column Discovery At Runtime? Help Much Appreciated
Hi -- I am fairly new to SSIS development, although I am starting to appreciate it more an more, especially since I have started getting into extending the object model. Here's my question:

I have a data flow that pulls data from any number of different delimited files with different numbers of columns. I have had no problem dealing with setting up run-time file locations and file names by using the expressions of a flat file data source, and i have been able to pretty easily deal with varying file delimiters by standardizing the files before they get into the data flow. however, I have not been able to come up with a solution that will allow my data source to discover its column info at run time, and then pass that information on to the data flow task. all i really care about is being able to properly parse the individual rows into individual column data by the flat file data source because the data flow itself is able to discover the actual data that the columns hold at run-time.

i would very much appreciate any feedback from anyone on possible solutions for this.

thanks!

View Replies !   View Related
Error: Unable To Retrieve Column Information From The Data Source
Hi,

I am trying to set up a data flow task. The source is "SQL Command" which is
a stored procedure. The proc has a few temp tables that it outputs the final
resultset from. When I hit preview in the ole db source editor, I see the
right output. When I select the "Columns" tab on the right, the "Available
External Column List" is empty. Why don't the column names appear? What is
the work around to get the column mappings to work b/w source and
destination in this scenario.
 
 
In DTS previously, you could "fool" the package by first compiling the
stored procedure with hardcoded column names and dummy values, creating and
saving the package and finally changing the procedure back to the actual
output. As long as the columns remained the same, all would work.
Thats not working for me in SSIS.

Thanks in advance.
Asim.

View Replies !   View Related
How Do I Add An ODBC Connection Data Source As A Data Flow Source
I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.

Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?

Thanks in advance

ADG

View Replies !   View Related
Amo And Creating Data Source And Data Source View Code
,
Hi
In this code how can I create a new data source and new data source view and model and structure that it run dynamic.
In this code I have a lot of errors, that they are about server and database don€™t have in current code,
In this code, first I should definition server or no?
 
Database    dbNew = new Database (databaseName,
                        Utils.GetSyntacticallyValidID(databaseName,                                                                               typeof(Database)));
srv.Databases.Add(dbNew);
dbNew.Update(true);
***********************************************************
 
How can I create data source and data source view and model and structure?
Please say code of that, and guide me.
databasename and srv is unknown.
Do I add other reference with analysis services?
Please explain about these codes:
************************************************************************
 1)
RelationalDataSource  dsNew = new RelationalDataSource(
            datasourceName,
            Utils.GetSyntacticallyValidID(
                                    datasourceName,
                                    typeof(RelationalDataSource)));
 
db.DataSources.Add(dsNew);
dsNew.ConnectionString = connectionString;

dsNew.Update();
2)
 
RelationalDataSourceView    rdsv;
 
rdsv = db.DataSourceViews.Add(
            datasourceviewName,
            Utils.GetSyntacticallyValidID(
                                    datasourceviewName,
                                    typeof(RelationalDataSourceView)));
 
rdsv.DataSourceID = ds.ID
***************************************************************
3)
OleDbConnection    cn = new OleDbConnection(ds.ConnectionString);
OleDbCommand       cmd = new OleDbCommand(
            "SELECT * FROM [" + tableName + "] WHERE 0=1", cn);
OleDbDataAdapter   ad = new OleDbDataAdapter(cmd);
 
DataSet dss = new DataSet();
ad.FillSchema(dss, SchemaType.Source);
 
*************************************************************
4)
 
// Make sure we have the name we thought
 
dss.Tables[0].TableName = tableName;
 
// Clone here - the original DataTable already belongs to a DataSet
rdsv.Schema.Tables.Add(dss.Tables[tableName].Clone());
rdsv.Update();
 
 
5)
 
MiningStructure  ms = db.MiningStructures.Add(miningstructureName,                         Utils.GetSyntacticallyValidID(miningstructureName,
                                                                              typeof(MiningStructure)));
ms.Source = new DataSourceViewBinding(dsv.ID);
ms.CaseTableName = "Customer";
 
      Add columns:
ScalarMiningStructureColumn smsc;
 
// From table "Customer" we will add a couple of columns
// CustomerID - key
smsc = new ScalarMiningStructureColumn("Customer ID",
                                    Utils.GetSyntacticallyValidID("Customer ID",                                                                typeof(ScalarMiningStructureColumn)));
smsc.IsKey = true;
smsc.Content = "Key";
smsc.KeyColumns.Add("Customer", "customer_id", OleDbType.Integer);
ms.Columns.Add(smsc);
 
*******************************************
6)
 
MiningModel mm = ms.MiningModels.Add(miningmodelName,
                                                Utils.GetSyntacticallyValidID(miningmodelName,
                                                            typeof(MiningModel)));
 
 
mm.Algorithm = "Microsoft_Decision_Trees";
mm.Parameters.Add("COMPLEXITY_PENALTY", 0.3);
 
 
MiningModelColumn mc = new MiningModelColumn("Customer ID",
                                                            Utils.GetSyntacticallyValidID("CustomerID",
                                                                        typeof(MiningModelColumn)));
mc.SourceColumnID = ms.Columns["Customer ID"].ID;
mc.Usage = "Key";
mm.Columns.Add(mc);
 
 
mm.Update();
 
Please exactly say, whatever I want
Thanks a lot for your answer
Please don€™t move this question because I don€™t know where I should write this.
 

View Replies !   View Related
Do We Have To Alawys Use Slowly Changing Dimensions (SCD) Component In The Data Flow For The Loading Of Table Data?
Hi, all experts here,
Do we always have to use SCD component for the loading of data into data warehouse to handle changes of rows?
I am looking forward to hearing from you and thank you very much in advance for your help.
With best regards,
 
 

View Replies !   View Related
SSIS Randomly Empties Out Column Data While Using Flat File Source
I'm having a problem using the Flat File Source while using the underlying .Net classes to execute SSIS Packages. The issue is that for some reason when I load a flat file it Empty's out columns randomly. Its happening in the Flat File Source Task. By random I mean that most of the times all the data gets loaded but sometimes it doesnt and it empty's out column data. Interestingly enough this is random and even the emptying out of columns isnt a complete empty, its more like a 90% emtpying. Now you'll ask that is the file different everytime and the answer is NO. Its the same file everytime. If I run the same file everytime for 10 times it would empty out various columns maybe 1 of those times. This doesnt seem to be a problem while working with dtexec or the Package Executor utility. Need Help!!

View Replies !   View Related
SSIS - Data Loading Job -- Update Col B With Col A If Col B Is NULL In The Data File?
How do u achieve this -- While SSIS Data Load Execution itself?

Update Col B with Col A value if Col B is NULL in the Data File?

View Replies !   View Related
Loading Data Froma A Text File To SQL Data Base
Hello!! searching information about how to migrate some date from an old data base (any tipe) from SQL I´v found this:
 LOAD DATA [LOW_PRIORITY | CONCURRENT] [LOCAL] INFILE 'file_name.txt'
[REPLACE | IGNORE]
INTO TABLE tbl_name
[FIELDS
[TERMINATED BY 'string']
[[OPTIONALLY] ENCLOSED BY 'char']
[ESCAPED BY 'char' ]
]
[LINES
[STARTING BY 'string']
[TERMINATED BY 'string']
]
[IGNORE number LINES]
[(col_name_or_user_var,...)]
[SET col_name = expr,...)]
 Does anybody know how does it works and how to use it????I´d like to know because I have to load data from a text file to a SQL Data Base and this seems to be te fastest an easiest way to do it...Thanks!!!!bye!

View Replies !   View Related
Overflow The Disk I/O Buffer
Hello,

I am getting "overflow the disk I/O buffer" in my SSIS, and what's weird is that when I construct the same SSIS in a new package, it works perfectly.  I almost want to believe that it could be a bug.  Some days when I import the files, it works fine, but some days it errors out with this error on the last column.  Is there some setting with CR/LF or LF that I have to pay attention to avoid this type of random error?

 

Thanks for your help!

-Lawrence

View Replies !   View Related
Data Missing When Loading Data Into Sql Server 2005
 

Hi, Experts

The project is a C/S data analysis system built with .Net 2.0 in windows environment, OS: Microsoft Windows 2003 R2 standard Edition Service Pack2, Database used in this project is: Sql server 2005. As a data analysis system, we need to load large amount of data from file to database, we do it by create a dts package and then do data loading by execute "m_Package.Execute(null, variables, m_PackageEvents, null, null)".
 
The problem is, we fount that DTS miss some data randomly sometimes, we can't find the rule till now. for example we've data as follows in data file, all data field splited by '|'
11234|26341|2007-09-03 00:00|0|0|0.0|0|0.011470833793282509|1|0.045497223734855652|0|0|1|0|3|2929|13130|43|0|2|0|0|40|1|0|0|0|0|0|1||0|0|3|0|0|0|0|0||0|3|0|0|43|43|0|41270|0|3|0|0|10|3|0|0|0|0|0||0|1912|0|0|3|0|0|0|0|0|0|0|3|0|0|5|0|40|0|9|0|0|0|0|0|0|0|0|29|1|1|24|24.0|16|16.0|0|0|0.0|0|0|24|23.980693817138672|0|0.0|0|0.0|0|0.0|0|0.0|11|2.0764460563659668|43|2|0|0|30|11|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|3|3|0|0|0|0|0|0|0|0|0|6|0|0|0|0|0|6|0|0|45|1|0|0|0|2|42|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|2|0|0|0|2|0|0|0|0|0|0|51|47|85|0|0|||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|||||||||||||0|0|0|0|0|97.117401123046875|0|0|83|57|||0.011738888919353485|0|1|0.065955556929111481|0|4|||0.00026658669230528176|1|0.00014440112863667309|1|68|53|12|2|1|2.0562667846679688|10|94|2|0|0|30|11|47|4|13902|7024|6878|18|85|4.9072666168212891|5|0.0|0|0.0|0|0.0|0|0.0|0|358|6448|6324|0|0|0|0||0||462|967|0|41|39|2|0|0|0|1|0|0|0|0|0|0|0|0|3|0|0|3|0|0|0|0|0|0|0|0|0|3|0|3|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|46|0|1|0|1|37|0|0|46|0|1|0|1|37|0|0|0|0|0|0|0|0|0.0|0|0|6|4|2|0|0|2|1|0|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|0|1|0.012290795333683491|0|44|44.0|0|0.0|0|0|0|30|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|2|0|2|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|2|1|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|1|0|0|0|0|0|0|0|0|0|0|0|0|27|0|0|2112|411|411|45|437|2|0|2|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|4|0|4|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|0|1|0|0|0|0|0|0|0|0|0|0|0|6|6|0|3|2|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|5|5.0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|600|600|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|6|0|0|0|0|0|0|6|0|9|1|2|2|3|0|1|0|0|0|0|0|0|0|0|0|0|0|13|3|2|5|1|1|1|0|0|0|102|0|1|1|0|0|0|3|3|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||0|0|0|0|0|0|0|0|0|0|0||0|0|0|0|0|0|0|0|0||||||||||0|0|0|0|0|0|0||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|46.0|46|0.0|0|0.0|0|0.011469460092484951|1|0.0|0|0.0|0|3|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|0|0.0|0|0|0|0|0|0|0|0|0|0|0|0|0|||0|100.0|100.0|0|1|0|1|0|0|0.02481505274772644|1|0.014951236546039581|1|0|0|0|0|0|0|0|0|0|0|0|0|0|||||||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|||0|||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|4695.5556640625|42260|7126.66650390625|62040|||||||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||||||0|0||||||||||

11213|26341|2007-09-03 00:00|0|0|0.0|0|0.068584725260734558|2|0.14375555515289307|27|0|2|1|11|3966|13162|97|0|13|0|0|83|3|2|3|0|0|0|26||0|0|11|0|0|0|1|0||0|1|0|3|97|98|0|246795|0|11|1|0|3|14|0|0|0|0|0||0|1912|0|0|12|0|0|0|0|0|0|0|12|0|0|17|0|83|2|2|2|0|0|0|0|0|0|0|73|3|1|24|24.0|16|16.0|0|0|0.0|3|0|24|23.905364990234375|2|0.0040000001899898052|0|0.0|0|0.0|0|0.0|11|2.0772171020507812|97|7|0|0|80|10|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|12|12|0|0|0|0|0|0|0|0|0|41|0|0|0|0|0|41|0|0|99|25|0|0|0|0|74|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|2|0|0|0|0|0|0|0|0|0|0|177|158|332|0|0|||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|3|||||||||||||0|0|0|0|0|0.0|0|0|321|198|||0.041950233280658722|0|2|0.1999288946390152|0|5|||0.00088306842371821404|1|0.00051651173271238804|1|529|113|4|8|2|2.0671226978302002|10|274|7|0|0|80|10|66|17|13934|7024|6910|31|332|4.7173333168029785|5|0.000033333333703922108|1|0.000033333333703922108|1|0.000033333333703922108|1|0.0|0|358|6448|6356|0|0|0|0||0||1609|3423|0|83|78|5|0|0|26|0|0|0|0|0|0|0|0|0|2|0|1|1|0|0|0|0|3|0|0|0|0|2|0|2|0|0|0|0|0|0|0|0|0|0|2|0|0|0|0|0|0.0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|65|0|1|0|1|72|0|0|65|0|1|0|1|72|0|0|0|0|0|0|0|0|0.0|0|0|12|7|0|2|3|16|5|5|6|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|0|2|0.04131799191236496|0|48|48.0|5|5.0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|0|0|0|0|0|0|1|0|0|0|0|0|0|9|0|5|1|0|0|0|1|0|0|0|1|1|0|0|0|0|0|0|0|0|0|0|4|2|1|0|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|3|0|0|0|0|3|0|0|0|0|0|0|0|0|121|0|1410|6046|558|1400|192|2467|10|0|5|1|0|0|0|2|0|0|0|1|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|15|0|10|0|0|0|0|3|0|1|0|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|0|1|0|0|0|0|0|0|0|0|0|0|0|21|9|12|10|3|1|0|1|4|0|1|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|163|4|144|91|92|2|92|0|0|0|0|0|101|92|0|0|0|0|101|0|0|0|0|600|596|1|0|0|3|0|0|0|0|0|0|0|0|0|0|0|9|0|0|1|0|0|0|8|0|34|3|4|14|7|2|3|0|1|0|0|0|0|0|0|0|0|0|41|6|4|23|5|2|1|0|0|0|289|0|7|7|0|0|0|11|11|0|0|4|4|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||0|0|0|0|0|0|0|0|0|0|0||0|0|4|0|0|0|0|0|4||||||||||3|0|0|0|0|0|3||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|55.814689636230469|47.931411743164062|48|0.0|0|0.0|0|0.068584725260734558|2|0.0|0|0.0|0|14|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|0|0.0|0|0|0|0|1|0|0|1|0|0|0|0|0|||0|100.0|100.0|0|26|26|0|0|0|0.088263392448425293|2|0.056161552667617798|2|0|0|0|0|0|0|0|0|0|5|22|0|0|||||||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|||0|||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|16308.888671875|146780|23162.22265625|184840|||||||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||||||0|0||||||||||

11220|26341|2007-09-03 00:00|0|0|0.0|0|0.309184730052948|2|0.17757916450500488|0|0|7|4|18|3925|13682|172|0|19|0|0|164|10|5|4|0|0|0|2||0|0|20|0|0|1|4|0||0|5|0|4|172|172|0|1165085|0|20|4|0|20|8|0|0|0|0|0||0|1912|0|0|24|0|0|1|0|0|0|0|23|0|0|30|0|164|4|6|8|0|0|0|0|0|0|0|121|10|15|24|24.0|16|16.0|0|0|0.0|4|0|24|23.646148681640625|1|0.0040013887919485569|0|0.0|0|0.0|0|0.0|11|2.0849723815917969|172|5|0|0|123|44|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|26|24|0|0|0|2|0|0|0|0|0|192|1|0|0|0|0|191|0|0|190|12|0|0|0|0|178|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|3|0|0|0|0|0|1|0|0|0|0|1008|953|2758|0|5|||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|4|||||||||||||0|0|0|0|0|84.418106079101562|0|0|2626|1420|||0.29022222757339478|0|5|1.5045944452285767|0|5|||0.0058597764000296593|2|0.0046600494533777237|2|1340|1114|80|119|27|2.2584490776062012|10|1180|5|0|0|123|44|953|55|14462|7024|7438|52|2758|3.0037333965301514|5|0.021266667172312737|1|0.00036666667438112199|1|0.0|0|0.0|0|362|6440|6880|0|0|0|0||0||13711|27667|0|159|149|10|0|0|1|1|0|0|0|0|0|0|0|0|7|0|0|7|0|0|0|0|4|0|0|0|0|7|0|7|0|0|0|0|0|0|0|0|0|2|3|0|0|0|0|0|0.0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|842|0|111|0|102|1702|0|1|842|0|111|0|0|1703|0|0|0|0|0|0|0|0|0.0|0|0|47|26|11|3|7|37|1|20|16|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|0|4|0.24921548366546631|0|44|44.0|0|0.0|0|0|0|1003|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|10|0|8|2|0|0|0|0|0|0|0|0|0|0|81|1|60|10|10|0|0|0|0|0|0|0|0|0|1|1|0|0|0|0|0|0|0|25|16|4|2|3|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|53|27|17|4|5|0|0|0|0|0|0|0|0|0|421|0|8685|67179|2138|12104|80|26285|104|1|73|16|14|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|87|1|77|7|2|0|0|0|0|0|0|0|0|0|1|0|0|1|0|0|0|0|0|0|0|0|0|0|16|0|9|5|2|0|0|0|0|0|0|0|0|0|155|155|0|105|51|32|9|13|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|0|1|0|0|0|0|0|0|0|0|0|0|0|5|5.0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|102|0|0|0|0|0|600|445|4|20|32|63|16|15|4|1|0|0|0|0|0|0|0|37|0|0|5|0|0|0|32|0|230|7|10|99|68|22|21|0|3|0|0|0|0|0|0|0|0|0|286|18|10|182|53|17|6|0|0|0|2528|0|10|10|0|0|0|22|22|0|0|25|25|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||0|0|0|0|0|0|0|0|0|0|0||0|0|30|0|0|0|0|0|30||||||||||23|0|0|0|0|0|23||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|1|0|0|0|0|0|0|0|0|0|0|0.0|45.998283386230469|46|0.0|0|0.0|0|0.30917638540267944|2|0.0|0|0.0|0|8|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0.0|0|0.0|0|0|0|0|1|1|0|0|0|0|0|0|0|||0|100.0|100.0|0|2|1|0|0|1|0.73375397920608521|5|0.41600942611694336|6|0|0|0|0|0|0|0|0|0|0|0|0|0|||||||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|||0|||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|98115.5546875|865520|176626.671875|1159360|||||||||||||||||||||||||||||||||||||||||||||||||||||||0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0||||||||||0|0||||||||||
 
We found that some of the data field become 'null' after the load action finished, if we load the same data again, problem disappeared, we can't 100% reproduce this issue each time, we don't know why, Anybody here can help us to solve this issue or give us some clue?
 
 
 

View Replies !   View Related
Error: The External Metadata Column Collection Is Out Of Synchronization With The Data Source Columns
Hello,

I have a SSIS package with a Data Flow task. This task transfers the data from SQL Server 2000 to a table in SQL Server 2005.

 

I deployed and tested this package on the Test Server. Then put this package in a job and executed it - Works fine.

 

On the production server- If I execute the package through DTEXECUI, it works fine. But when I try executing it through a job- the job fails and it gives me following error:

Description: The external metadata column collection is out of synchronization with the data source columns. The "external metadata column "T_FieldName" (82)" needs to be removed from the external metadata column collection....

 

What I don't understand is, why are there no errors displayed when I execute the package through DTEXECUI.

 

Can anyone help me to resolve this issue.

 

Thanks.

View Replies !   View Related
Skip A Row In The Flatfile Source
I am importing a flatfile and cannot seem to deal with an issue that seems quite simple.

The files have a header row with column names and those rows start with '#'

However sometimes this header row will also be present in the middle of the file.

The Source tries to parse this row and fails

Is there any way to tell the flafile source to skip rows that start with a particular character like comment rows?

View Replies !   View Related
Deleting Existing Data Before Loading New Data
I have a package which loads data from a flat file (csv) to 4 tables in a database.
Now, the load is incremental.

I want to clear the data of all 4 tables(in the database) before loading the data from flat file everytime.How can i do this?
Iam using 4 Oledb Destinations, 1 multicast, 1 source component to do this.
Also can it happen like a transaction? because if it deletes the existing data and couldnt load new data there will be a problem!.how to avoid this?

View Replies !   View Related
Data Recovery SOURCE CODE ( SOURCE CODES Of Professional Data Recovery Software )
Hi,I am a Data Recovery Specialist and Professional Data RecoverySoftware Developer in New Delhi.I've placed the Complete SOURCE CODE of One of my Data RecoverySoftware for Sale (for Educational Purpose) on the following link ofmy website:http://www.datadoctor.biz/3.htmI'd like to inform you that I am the author of World's First Book onProfessional Data Recovery Programming titled, "Data Recovery with &without Programming". You can see the contents of the book onfollowing link of my website:http://www.datadoctor.biz/author.htmI also have many other Professional software with Source codesavailable for sale. However, I've not listed them on my website.If you've any Query or comments Please Feel Free to mail me,Looking for your response,Regards,Tarun Tyagi,J-110, Patel Nagar - 1,Ghaziabad (U.P.), India - 201001Phone: (+91)9868337762(+91)9810191117(+91)9350190934e-mail: Join Bytes!http://www.DataDoctor.biz

View Replies !   View Related
Create Data Source, Data Source View From XML?
hi everybody,
i want to create data source and data source view  for data mining, with using C Sharp.
i have create data source and data source view and export to XML file, but when i change to another computer, run those XML file, it return error, when i run statement to create and biuld mining model, what can i change on xml  or how to run XML on another computer sucessfully,
and have i build data source and data source view, how to do it.?

thanks for you helps

View Replies !   View Related
Cannot Create A Connection To Data Source 'data Source Name'
Today I was making a few reports.
When I tested the reports in Visual Studio, they worked great: I got the expected result.
But when I deployed the reports to our reportserver the problem started.
When I click on the directory in which my reports are deployed, I got my 4 reports.
Till now everything worked correct.
But when I click on a report to view the results it went wrong.
I got an error:
"Cannot create a connection to data source 'Live'"
(Live is the name of our data source).
 
We are using the Windows Logons and I am sure that I have all the rights on the server, I gave myself 'sysadmin' rights, so it should work.
I also have tried it with all the roles assigned on my account, but then it still won't work.
 
When I modify the data source, and set it to another server en database it works.
The datasource 'Live' exists on a x64 MsSQL server, en the other datasource is on a x86 MsSQL server.
Maybe that is the problem?
 
Can someone tell me what is wrong?

View Replies !   View Related
Populate Flatfile Source From Variable
We are storing incoming flatfiles into a text field in a table and then we are processing this table on a regular basis. What I would like to do is to get this flatfile from the textfield and populate a flatfile source with it, but so far I have only been able to do that with XML files as there are no option for doing that with the flatfile source. Using the disk as a temporary storage for the flatfile is prohibited.

Does anyone have any suggestions on how to solve this?

View Replies !   View Related
Dynamic File Name For Flatfile Source In SSIS
I have CSV file as source for SSIS package every time the filename will be changing like trd_1990M1_1990M12.csv,trd_1991M1_1991M12.csv , trd_1992M1_1992M12.csv etc.,

so it will vary as per user selection . i need to run the same SSIS package to execute the different file name with the same structure.


Please let me know the solution for that how to pass the file name dynamically to SSIS package.

View Replies !   View Related
SSIS..Problem Parsing FlatFile Source
I'm trying to Move data from a FlatFile Source to an SQL destination

row delimiter {LF}
Column Delimiter is "comma"
Number of columns in each row : say 7

Example Rows

Example 1:
1,1,1,1,1,1,1{LF}2,2,2,2,2,2,2{LF}3,3,3,3,3,3,3{LF}4,4,4,4,4,4,4{LF}

Example 2:
1,1,1,1{LF}2,2,2,2,2,2,2{LF}3,3,3,3{LF}4,4{LF}

There is no problem parsing Example 1:
With Example 2.

The Old DTS used to parse fine..when it encounters a row delimiter it fills the rest of the columns with null...

While the New SSIS flat File source is following column count in each row...and is considering " 1{LF}2" as column item rather than a row delimiter...

Is there any way around it or is it a bug?

Thanks for any help in advance

View Replies !   View Related
The Conversion Of The Nvarchar Value '3008000003' Overflowed An Int Column. Maximum Integer Value Exceeded.
 HiAm Using ASP.NET With SQL SERVER 2005 Backend
AGENT CODE
3008000003

               



NAME
agent code dropdownlist values like 1005000006,2009000002,3008000003select dropdownlist value it display corresponding values related to that codewhen i select first 2 values its run properly,But when i select  3008000003 i will get following error messagein SQL SERVER 2005 Agent Code Date Type is "bigint"" The conversion of the nvarchar value '3008000003' overflowed an int
column. Maximum integer value exceeded. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: The conversion of the nvarchar value
'3008000003' overflowed an int column. Maximum integer value
exceeded.Source Error:



An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:  Please Help me to solve this issueThanks With RegardsS.Senthil Nathan   

View Replies !   View Related
&&"A Data Source Instance Has Not Been Supplied For The Data Source Problem&&"--
Hi all,
        I am new to SQL Server reporting services 2005. I have created two client side reports using asp.net web application. I called through report viewer. If i called the first report, its loading in the viewer, then i called the second report immediately "A data source instance has not been supplied for the data source "dsAllAccounts_SELECT_Student_REPORTS".

the same error occuring when i called the second report first and then the first report second.. please help me to over come this..

Thanks in advance..

Regards
Nataraj.C

View Replies !   View Related
Execute A Flatfile Source To Oledb Destination For Each File In A Folder.
Hello, I wanted to do the following.

Copy a full directory from source to destination (Done)

then for each file on the destination directory,it must process that file and insert rows on the table.

So I created a foreach loop, and created a varriable aclled CURRENTFILENAME, and assigned it into the foreachloop to index 0.

 

Inside the foreachloop I created a dataflow task, in the dataflow task I dragged a flat file source and an oledb destination, but I noticed that the flat file source requires flat file manager, and the flat file manager requires a unique FILE NAME. I cant put this c:copia*.txt.

I took a loot at flat file source properties and it has associated the flat file manager, but I can not assign the filename to the variable from the foreach.

 

Any ideas please

 

 

View Replies !   View Related
SSIS Programmaing - How To Map Flatfile Source Columns To SQL Server Destination?
Hi,
 
I am new to SSIS programming and trying to export data from a flatfile source to SQL server destination table dynamically. I need to get the table schema info (column length, data type etc.) from SQL server table and then map the source columns from flatfile to destination table columns.
 
I am referring to one of the programming samples from Microsoft and another excellent article by Moim Hossain. Can someone help me understand how to map the Source columns to destination table columns depending on table schema? Please help.

 
Thanks

View Replies !   View Related
Buffer Problems On Data Flow
From what I remember there were a couple problems in the ctp's with buffer allocation errors.  We seem to be seeing a similar error on 2005 x64 when we create a large number of sources and destinations within one dataflow task (something more than around 15 of each).  Basically all we are doing is copying tables from one db to another.  The computer will lock after about a million rows with a ton of the following messages:

The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 124 buffers were considered and 124 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.

We have 4 gigs of ram on that server so I'm not sure what's wrong with this.

View Replies !   View Related
Data Leaked A Buffer With ID 1 Of Type 1
We are using a datareader component to retrieve data from a Pervasive 8.6 database.  We have four separate datareader components in various packages retrieving data into our datawarehouse in SQL2005.  One of the components has started to fail regularly with the following error.

 

Date  6/8/2007 3:05:00 AM
Log  Job History (LoadMAXDailyBookings)

Step ID  1
Server  US-CO-DEN-101
Job Name  LoadMAXDailyBookings
Step Name  Load Bookings Step
Duration  00:00:37
Sql Severity  0
Sql Message ID  0
Operator Emailed  
Operator Net sent  
Operator Paged  
Retries Attempted  0

Message
Destination Write Bookings Detail" (121)" wrote 0 rows.
End Info
Log:
     Name: PipelineBufferLeak
     Computer: US-CO-DEN-101
     Message: component "Get Bookings from MAX" (1) leaked a buffer with ID 1 of type 1 with 0 rows and a reference count of 1.
End Log
Log:
     Name: OnTaskFailed
     Computer: US-CO-DEN-101
     Message: (blank)
End Log
Log:
     Name: OnPostExecute
     Computer: US-CO-DEN-101
     Message: (blank)
End Log
Log:
     Name: OnWarning
     Computer: US-CO-DEN-101
     Message: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED.  The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.

End Log
Warning: 2007-06-08 03:05:36.92
   Code: 0x80019002
   Source: LoadMAXDailyBookings
   Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED.  The Execution...

 

The other components run without any problems as did this one up until we installed service pack 2.  We then started getting these occasional failures.  Any thoughts on what is happening here?

 

Thanks,

 

Phil

View Replies !   View Related
Pipeline Error-excel Source-data Reader Does Not Read In Meta Data
Hi all, i got this error:
 

[DTS.Pipeline] Error: "component "Excel Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
 
and also this:
 
[Excel Source [1]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "Fiscal Week" needs to be updated in the external metadata column collection. The column "Fiscal Year" needs to be updated in the external metadata column collection. The column "1st level" needs to be added to the external metadata column collection. The column "2nd level" needs to be added to the external metadata column collection. The column "3rd level" needs to be added to the external metadata column collection. The "external metadata column "1st Level" (16745)" needs to be removed from the external metadata column collection. The "external metadata column "3rd Level" (16609)" needs to be removed from the external metadata column collection. The "external metadata column "2nd Level" (16272)" needs to be removed from the external metadata column collection.

 
I tried going data flow->excel connection->advanced editor for excel source-> input and output properties and tried to refresh the columns affected.
It seems that somehow the 3 columns are not read in from the source file?
ans alslo fiscal year, fiscal week is not set up up properly in my data destination?
anyone faced such errors before?
 
Thanks

View Replies !   View Related
XML Data Source .. Expression? Variable? Connection? Error: Unable To Read The XML Data.
RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.

I want my XML Data source to be an expression as i will be looping through a directory of xml files.

I don't see the expression property or the connection property??

I tried setting the XMLData property to @[User::filename], but that results in:

Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data.
Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows.
Task failed: Load XML Files
Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).


Thanks for any help or information.

View Replies !   View Related
Truncation Of String Data With Data Reader Source Connecting To ODBC DSN
A data reader is using a connection manager to connect to an ODBC System DSN .  A query in the SqlCommand property is provided.   Data is being truncated in the only string column .  The data type in data reader output-->external columns shows as Unicode string [DT_WSTR] Length 7. 

The truncated output in a text file is the first 3 characters from left to right .  Changing the column order has no effect.

 

A linked server was created in SQL Server Management Studio to test the ODBC System DSN using the following:

EXEC sp_addlinkedserver
   @server = 'server_name',
   @srvproduct = '',
   @provider = 'MSDASQL',
   @datasrc = 'odbc_dsn_name'

Data returned using "OPENQUERY" does not truncate the string column indicating that the ODBC Driver returns data as expected with sql 2005, but not with the Data Reader. 

Any assistance would be appreciated. 

Thanks,

View Replies !   View Related
Uploading An Image And Using An ASP.NET 2.0 Data Source Control Code To Store The Binary Data PROBLEM
I want to use a Stored Procedure (and add Parameters) instead of ADO.NET Code from the following article, but I'm not seeing something; could someone help me out?
Note: It's Visual Basic 2005 code, and that's what I want to use.
 http://aspnet.4guysfromrolla.com/articles/120606-1.aspx And code for article: http://aspnet.4guysfromrolla.com/code/BLOBsInDB.zip
If you look at this article, under the section: Uploading an Image and Using an ASP.NET 2.0 Data Source Control Code to Store the Binary DataIt has the following Code for the DetailsView UploadPictureUI_ItemInserting:
<asp:SqlDataSource ID="UploadPictureDataSource" runat="server"       ConnectionString="..."      InsertCommand="INSERT INTO [Pictures] ([Title], [MIMEType], [ImageData]) VALUES (@Title, @MIMEType, @ImageData)">  <InsertParameters>    <asp:Parameter Name="Title" Type="String" />    <asp:Parameter Name="MIMEType" Type="String" />    <asp:Parameter Name="ImageData" />  </InsertParameters></asp:SqlDataSource>
I tried to use the following, but It's not correct:
<asp:SqlDataSource ID="UploadPictureDataSource" runat="server"       ConnectionString="..."      InsertCommand="InsertPicture" InsertCommandType="StoredProcedure">  <InsertParameters>    <asp:Parameter Name="Title" Type="String" />    <asp:Parameter Name="MIMEType" Type="String" />    <asp:Parameter Name="ImageData" />  </InsertParameters></asp:SqlDataSource>
How do I simply replace the INSERT INTO Statement with a StoredProcedure, and set the parameters? Currently I have the Insert working, but the image shows up as an image placeholder and that's it.
ps: The stored procedure I use is below, and you might want to download the VB Code at the bottom of the article.ALTER PROCEDURE dbo.InsertPicture
 
(@PictureID int,
@Title varchar (50),@MIMEType varchar(50),
@ImageData varbinary
)
 
ASINSERT [Pictures] ([Title], [MIMEType], [ImageData]) VALUES (@Title, @MIMEType, @ImageData)
 
RETURN

View Replies !   View Related
Selecting A Single Data Source From Multiple Data Sources
Hi,

I am pretty new to SSIS. I am trying to create a package which can accept data in any of several formats.  i.e. CSV, Excel, a SQL Server database/table and import the data into my destination database.

So far i've managed to get this working OK.  However I am now TOTALLY stuck.  I'm currently trying to just concentrate on the data sources being a CSV (using a Flat File Data Source) and/or an Excel Spreadsheet.

I can get the data in and to my destination using a UNION ALL component and mapping the data sources to it so long as both the CSV file and the Excel spreadsheet exist.

My problem is that I need my package to handle the possibility that only the CSV file might exist and there is no Excel spreadsheet.  In which case i'd like the package to ignore the Excel datasource completely.  Currently either of my data sources do not exist I get errors and the package terminates.

Is there any way in SSIS that I can check all my data sources to see which ones exist (i.e. are valid).  If they exist I want to use them. If it doesn't exist i'd like to disgard it (without error - as long as there is a single datasource the package should run)

I've tried using the AcquireConnection method in a script task on each of my connections, hoping that it would error if the file/datasource did not exist.  It doesn't though (in the case of an Excel datasource it just creates a empty excel file for me).

The only other option I can come up with are to have seperate packages depending on the type of data we want to import and then run a particular package depending on the format of the source data.  This seems a bit long winded.  I am pretty sure I must be able to do what I want to achieve but I can't work out how. 

I'll be grateful to anyone who can send me any tips/hints/links on how I can achieve this.

Many thanks

Rob Gibson

View Replies !   View Related
Deploy Data Source, Data Model, Reports Programmatically
Hi,

what is the efficient way to deploy data source, data model, reports to sql reporting server programmatically (thru C# or VB.NET)?
Any sample/hint would be helpful

Thanks in advance.

View Replies !   View Related

Copyright © 2005-08 www.BigResource.com, All rights reserved