I have a package in which i have programatically created dataflow task. It used to work fine but now it fails with series of errors out of which one is below
Error 30002: Type 'MainPipe' is not defined. Line 63 Columns 33-40 Line Text: Dim DataFlowTask As MainPipe = CType(DataFlowTaskHost.InnerObject, MainPipe)
It seems all the function and classes referd from following dlls is not working:
Microsoft.SqlServer.DTSRuntimeWrap.dll
Microsoft.SqlServer.DTSPipelineWrap.dll
I say so because i get the following error also:
Error 30652: Reference required to assembly 'Microsoft.SqlServer.DTSRuntimeWrap, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' containing the type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90'. Add one to your project. Line 86 Columns 33-64 Line Text: DtsConvert.ToConnectionManager90(ChildPackage.Connections(""Source"")) These dlls are in GAC and in C:Program FilesMicrosoft SQL Server90SDKAssemblies with same version but still it gives above error.
I am getting the following error when I start debugging my Package, I am not sure what this is related to, but basically, input (datatype is a int, and its mapped to a column which is also int), so I am not sure whats happening here. The input column is actually a derived column, and its set as a 4 byte un-signed int, please advice on where should I start looking to troubleshoot this issue. This loanapplicationid is actually a user variable that is utilized by other tasks in my control flow as well:
Error: 0xC020901C at InsertApplicationCL5, OLE DB Destination [16]: There was an error with input column "LoanApplicationID" (1161) on input "OLE DB Destination Input" (29). The column status returned was: "The value violated the integrity constraints for the column.".
These refer to Microsoft.SqlServer.DTSPipelineWrap.dll and Microsoft.SQLServer.DTSRuntimeWrap.dll. While these assemblies were already there in my dev machine I don't find these files in production enviornment for SQL server 2005. I am refering these assemblies from following path in my local machine : C:Program FilesMicrosoft SQL Server90SDKAssemblies.
How to install these assemblies in prod env, offcource one option is to copy it and then put it in GAC thru script . Why does not it gets installed while installation of SQL server 2005. Are these assemly dependent on SP1 ?
I created a SSIS Package programatically based on the few threads here in this forum. This package just has a data flow task, during data transfer for every 1000 rows or so I want to update the status in a table in the database.
How do I achieve this?
As of now I just have a source and a destination, no transformations in between the flow. I'm not sure if rowcount will help, when I tried it using a onprogress even handler it always showed up as zero.
2: Dataflow Task: Datareader--Script componant--OLE DB Destination (SQL Server 2005--a single table --always around 600,000 rows)
How do I set up a transaction where if there is a failure the Truncate Table command will roll back---and the OLE Destination (A single SQL Server table) will be left the same as before the load started.
Another question with that volume of data --600,000 rows will a truncate table be pratical in a transaction
I've put together a SSIS package that, once a user uploads an Excel spreadsheet from a webpage, grabs it, does a mess of calculations and spits it out into a datareader (this last part is tricky, but I haven't even gotten to this point yet). In BIDS, the package works fine. Run using the 32-bit version of dtexec, it runs fine. But when I try to call it from the page, I keep getting an error. The errors look familiar enough that I'm thinking it's due to the package trying to run 64-bit, and that not playing nicely with Excel. If that's true, is there an easy way to force the 32-but version to be used? I've already set the project properties to Run64BitRuntime = false, which I'd hoped would help. but no luck.
-1071636471 TestReports_UploadTestReport Connection manager "Excel Connection Manager" Microsoft.SqlServer.Dts.Runtime.DtsError0{8BDFE898-E9D8-4D23-9739-DA807BCDC2AC} SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". -1071611876 DFT - Upload spreadsheet to dataset Excel Source [1] Microsoft.SqlServer.Dts.Runtime.DtsError0dtsmsg.rll{8BDFE893-E9D8-4D23-9739-DA807BCDC2AC} SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. -1073450985 DFT - Upload spreadsheet to dataset DTS.Pipeline Microsoft.SqlServer.Dts.Runtime.DtsError0dtsmsg.rll{8BDFE893-E9D8-4D23-9739-DA807BCDC2AC} component "Excel Source" (1) failed validation and returned error code 0xC020801C. -1073450996 DFT - Upload spreadsheet to dataset DTS.Pipeline Microsoft.SqlServer.Dts.Runtime.DtsError0dtsmsg.rll{8BDFE893-E9D8-4D23-9739-DA807BCDC2AC} One or more component failed validation. -1073594105 DFT - Upload spreadsheet to dataset
I have 4 data flows in a for loop, is it possibly to roll the whole for loop back if any of the transactions fail. Also is it possibly to roll back a dataflow if any of the components inside the dataflow fail?
I have code which generates packages programatically, and script task is a part of the control flow. I've succeded to set source code programatically, but I do not know how to put binary code, because I need to have my script task precompiled.
Just setting PreCompile = true does not solve this problem
Generated XML when done thru SSIS Editor. i have given only the DTSObject..thats where i am struck.
Code Block <DTS:ObjectData> <ScriptProject Name="ScriptTask_d17b2b95a3984e37a536f2a6e017e2c9" Language="Microsoft Visual Basic .NET" EntryPoint="ScriptMain" SaveBinaries="True" ReadOnlyVariables="" ReadWriteVariables="User::SalesId"> <ProjectItem Name="dts://Scripts/ScriptTask_d17b2b95a3984e37a536f2a6e017e2c9/ScriptMain.vsaitem"> <![CDATA[' Microsoft SQL Server Integration Services Script Task ' Write scripts using Microsoft Visual Basic ' The ScriptMain class is the entry point of the Script Task. Imports System Imports System.Data Imports System.Math
In the DTSObject, i dont know how to add details thru C# code. Please help me. Thanks.
Here is my scenario in my ETL process, I have one DataFlow task. Assuming that i have 10 clean records in my source database and i need to load all the 10 recs into my target table. IS there any means of cross checking the no of rows from source table and number of rows loaded into my target table.
I got a text file with two columns. and I need to generate a integer key automatically with the row number (or any distinct number, I thought row number will be OK). and when I make the data flow task to import this text file into a raw file I need to get the unique rownumber as Id. How can I make this in the data flow tak??
I written a SSIS package to import a table from one database to another database. I used dataflow task with oledb source and oledb destination with fastload. For 2 million records its taking 5 min . The same import using DTS I am getting in 2 mins. DTS package is more faster than SSIS package ?. any reasons why SSIS is taking more time?
I need to create a ssis package. I want to import the data from a flat file to a table.
Lets say, the table has 5 columns -- col1, col2, col3, col4 , col5.(Assume that all columns can be NULLABLE) The datafile contains the data related to only three columns say col1, col2, col3. So when I use dataflow task to import the data from the file to the table, I will only get three columns, col1, col2, col3. Columns col4, col5 will be NULL. However, I want to populate columns col4, col5 with some values which are stored in the variable.
I want to be able to loop through a view and execute a dataflow task for each record. I would like to pass the value of a column to the dataflow task to be used as a parameter in a data reader.
I am getting data from an external source. External data has a column called "Type". I have a variable in my package which contains the list of types as shown below:
Filtered_type_List = 2,4,8,10,11
If this variable(Filtered_type_List) is blank, then I need all the data from the external source and if it is not blank then I only need the records matching to his list. How can I implement this in DataFlow Task?
In the control flow I have an "Execute SQL Task" that executes a stored procedure. The stored procedure returns a result set of about 2000 rows of data into a package variable that has been typed as Object to contain the data.
What I have not been able to figure out is how to access the rows of data (in the package variable) from within a data flow task. There does not seem to be a data flow source task to perform that operation.
I have debugged a Control Flow script task and everything went as expected. I put a breakpoint somewhere in my script code, press F5 and execution will break there.
Hi All, I want to show the error message during Data Flow In SSIS, if an error would occur. I am able to redirect the row in file but i want to display the error like "Error : Its Not Set". Is it possible? if please help me.
Hi, In terms of data flow tasks, when say we load text files into databases.
Is it possible to have it in a way so that if a certain record (line in the text file) fails to load due to watever reason, it gets written to another table, but the rest of the records still get loaded?
I try to do so and end up with the whole data flow task failing and it stalls at the record that had the error and doesn't seem to continue forward.
I just used the red arrow (on failure) and put that to another SQL destination object. But yeah that didnt work.
If someone has a better way of doing so, would be awesome if you can share that.
I have a problem whit loading XML-files into SQL server.
I iterate over the XML-files with the "for each file" component and use the XML source within a Data flow task. This works great until the file count got bigger. After say 1000 files the XML source returns error 0x8007000E. I think this means out of memory. Does anyone have an idea how to solv this. The load must be able to handle up to 5000 files in one batch.
Does anyone know how to create an eventhandler for a dataflow task specific events (OnPipelinePostEndOfRowset, OnPipelineRowsSent, etc.)? These events are available for logging via the standard logging infrastructure, but there seems to no eventhandler for them.
The reason I'm interested is that parsing information logged by these events using builtin log providers is not easy (eg., the number of rows sent gets burried somewhere in the message column (i'm using sql provider). I'd like to capture this information and record it cleanly in a custom ssis metadata database i'm building. Any ideas are welcome. Thanks.
Maybe I am mistaken ( most likely ). But I am missing a dataflow task, which would do something similar like Throw Execption.
The project I am currently working on needs to validate a lot of different data. And sometimes incorrect data ( corrupted, incomplete or unexepected ) is coming from the source system. In case of this I need to trigger an error and discard the complete row or batch depending on the situation.
For example: In our source system we have some flag fields. And certain combinations of flags are not logical (business rules) but the system allows data to be inputted in this unlogical ways. And because we are creating the system I am expecting some combinations flags which are allowed but not properly defined in the specification.
So when I use a conditional split, I want the default output to trigger an error instead of an output.
How can I pass a variable to a DataReader in a DataFlow task?
My SqlCommand for the DataReader is: SELECT CustName, CustCode FROM Customers WHERE CustCode = '?'
The DataFlow task is nested in a ForEach loop. I confirmed that the variable is changing with each loop by using a ScriptTaks and a message box. However, the DataReader SqlCommand does not seem to be updating.
I am trying to use an XML Source on xml data from an XML webservice, I am putting the document into a variable the trying to import the data from there with the XML Source, but I am getting an error telling me that truncation occured
The Error is "[XML Source [1]] Error: The "component "XML Source" (1)" failed because truncation occurred, and the truncation row disposition on "output column "linking" (1579)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component."
The linking column mensioned in the error is sometime quite a long string but there is nowhere in the XML Source editor to change the size.
HI, I have to copy tables (approx. 60) content from one database to another using SSIS. I know that I can call an execute SQL task to execute an INSERT INTO <target table> SELECT * FROM <source table>.
I was wondering if I could use a single dataflow and change its source and target transform data source to do the same as above. In a script component, is it possible to load a package and modify its dataflow to simulate the INSERT INTO <target table> SELECT * FROM <source table>?
I was using the code in this thread (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1371094&SiteID=1) to create a console application which can build the SSIS package dynamically and run the package.
If the source column and destination column names are of different cases then the application was failing during the mapping. So I modified the for each loop like below. Still this is not a fool proof method, this will work as long as all characters in the column names are upper or lower.
for eg., Source column = empl_id, Destination column = EMPL_ID, in this case the below code will work. if the source column or destination column is Empl_Id, then the below mapping will fail.
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
I am using a Data Flow task which copies data from an Excel Source to a SQL Database Table Destination. From 15 columns I require only 10 columns to be imported to the DB Table. So I have mapped those colums. In SQL DB there is a colum called say X, whose value should be the "Remedy" for all the columns which are imported. Is there any task that can achieve it.
I need to write back to a legacy system in the form of flat file --the first row would be a header and the remaining rows would be the actuals rows of data--each field would have a column delimiter of , and a row delimter of CRLF.
The source is a SQL Server 2005 table.
Im looking for a good example of a script task in the dataflow section that writes to a file.
Can anyone show me the code how to do this or point me to a link.