Reporting Services :: DateTime Parameter With NULL Value Is Default

Jul 4, 2015

I have a report with datetime parameter which is required to be optional (there should be an option not to select this parameter which would cause in not narrowing result of this report by this parameter).

I used datetime parameter

@daTo (to have the calendar control for selecting date) and check on "Allow Null" value. Here is default Value.

I've also tried to set DefaultValue expression was "=Nothing".  

IN my query of data set, here is the part I use the parameter @daTo
 ... Where (@daTo IS NULL OR TRUNC(@daTo) >= TRUNC(pe.start_time) ....

But when I run the report, I got below error:

ORA-00932: inconsistent datatypes: expected DATE got NUMBER

I think it @daTo value actually not null so it try to TRunc the value

I don't know how to set null value default in my report.

View 4 Replies


ADVERTISEMENT

Reporting Services :: Give Meaning Full Name To Allow Null Value Check Box In Report Parameter Instead Of NULL?

Oct 20, 2015

In my report i have CNAME parameter , which allows null value. I checked Allow null value check box in report parameter properties.

when i preview the report , it displays checked NULL check box beside CNAME parameter . I want to give some meaningful name(i.e.ALLCustomers) to this checkbox instead of NULL. 

Is it possible through SSRS designer?

View 5 Replies View Related

Reporting Services :: Share Point List Data Set Parameter Allow Null In Multivalue Drop Down Parameter

Aug 28, 2015

my dataset from sharepoint list. and this dataset value assign to parameter. i want when no any parameter is selected than it should filter like "ALL". when i select alow null value it give me prompt error you  can not select null in multivalue parameter.How can i do it. i am using share point list.

View 3 Replies View Related

Reporting Services :: SSRS Parameters Default Or Null Value

May 12, 2015

I'm trying to have a default or null value in the dropdown list of the parameters on SSRS report. The dataset is bound with the Dynamics-AX 2009 AOT query. In the screen shot below you can see that I need a show All option in the dropdown list.

View 7 Replies View Related

Reporting Services :: Default Value In Parameter SSRS Report

May 7, 2012

I created a parameter with available values from a dataset.

By default i want it to display the maximum value. and then the user can select the dates if he does not like the default value.

How to i do this. because when i tried to set the paramter default value to max(dataset!dt.value) it says expression canot be used.

How to do this. Should I create a dataset with maximum value and then assign it to this one.

View 12 Replies View Related

Reporting Services :: Default Value Refreshing In Cascading Parameter (SSRS)

Jul 19, 2011

I have two parameters, lets say P1 and P2. P2 is cascaded with P1. P1 -> P2.

For the parameter P2, the following proterty set are

 1. Multi Select
 2. The default value is all the available value selected (Same dataset is assigned to both "Available Values" and "Default Values")

The data relation be,
P1    P2
A     a
A     b
A     c
A     d
B     a

Now the issue is,

Step 1 : When i choose A in P1 first time, a,b,c and d in P2 are selected
Step 2 : When i change B in P1, a is selected
Step 3 : When i change back to A in P1, only a is selected in P2 (a,b,c and d should be selected)

View 3 Replies View Related

How To Pass Null Parameter In Reporting Services(11th)

Mar 11, 2008

Hi all

How to pass Null parameter in Reporting Services.
Regards

View 14 Replies View Related

SQL Server Reporting Services - Report Datetime Parameter Validation

Jan 23, 2007

Hi,

How can we validate the
input values from user for a datetime
type report parameter?
i.e. Validating whether
the date is correct and in required
format.

Thanks in
Advance.
Ramesh
KS

View 1 Replies View Related

Reporting Services :: SSRS 2012 - MultiValue Parameter Throws Error On Setting Up Default Value

Aug 3, 2015

I have a multi value  parameter called "Location" and this depends on another multi valued  parameter value. The default value for the parameter "Location" comes from the another another multi valued  parameter. Now say when the default value is set for the parameter Location like the below:

The Location parameter data set has values from the Query and default values has been set as shown below:

=Iif(array.IndexOf(Parameters!Program.Value,"A")>-1,nothing,"N/A")

I get an error on preview saying that . The Default Expression for the report parameter "Location" contains error:

Unable to cast object of type 'System.String' to type 'System.Array'.

View 2 Replies View Related

Reporting Services :: SSRS 2008 Report Parameter Default Value Doesn't Work When Deployed

May 12, 2010

I have a parameter that chooses its available items from a query (with a label and a value column). I set the default for the parameter to the a particular value.

It works in Preview from design mode, but when I deploy it and run the report, it does not set the default.

View 5 Replies View Related

Unable To Pass Null Value With DropDownList Parameter In Reporting Services 2005

Dec 3, 2007



Hello,

I have a stored procedure that on two fields it allows null. On the report, I have two DropDownList boxes that are populated with data, however, I would like the user to be able to have the option of not selecting an item from these list, thus passing null to the stored procedure.

When I goto "Report | Report Parameters" I have set these fields to "allow null" and "allow blank" and at the bottom I also gave it the default value of null.

When I run the report in preview mode, those two dropdownlist have a <Select a Value> and my assumption is since I want them to pass null, I will just leave them that way. However, when the report is ran, I receive an error saying "Please select a value for the parameter: (my parameter)". So it forces me to select an option at which I don't want to do.

How can I set this to pass a null?

Thanks,
Flea#

View 11 Replies View Related

Reporting Services :: Null Value Not Appearing In SSRS Multi-Select Parameter List

Apr 16, 2009

I am trying to get a null value to pass to a multi-select parameter in SSRS 2005.  The multi-select box is getting its possible values from the following query:

SELECT NULL CMP_ID, '<all companies>' COMPANY UNION SELECT DISTINCT T1.CMP_ID, T1.COMPANY FROM VIEWCOMPANYLIST T1 WHERE T1.DIV_ID = 2  ORDER BY 1

This query is pre-pending a row with NULL as the first ID.  The resulting data set is exactly what you would expect - Row 1 has a null in column CMP_ID, and <all companies> in column COMPANY.  All the rest of the rows have proper data. My multi-select parameter box is of type Multi-value Int, with possible values populated by this query and a default of NULL. However, when I preview the report, the <all companies> row disappears. 

It's not even in the list, and it's not getting selected by the default selector.  So, of course, when I try to View Report without selecting anything, I get prompted to select a company. Why the prepended row in my dataset is getting dropped from the multi-select box at display time?  And yes, I have to be able to pass a null value because the stored procedure on which the report is based expects this parameter to be optional.

View 4 Replies View Related

Subscription Issue With Null Default Parameter - Key Cannot Be Null

May 3, 2007

I have a report that is run on a monthly basis with a default date of null. The stored procedure determines the month-end date that it should use should it be sent a null date.

The report works fine when I tell it to create a history entry; however, when I try to add a subscription it doesn't appear to like the null parameter value. Since I have told the report to have a default value of null it doesn't allow me to enter a value on the subscription page.

Now, I suppose I could remove the parameter altogether from the stored proc, but then the users would never be able to run the report for a previous time period. Can someone explain to me why default values aren't allowed to be used on subscriptions when they seem to work fine for ad hoc and scheduled reports? This is really quite frustrating as most of my reports require a date value and default to null so that the user doesn't have to enter them for the latest data.



An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help




Key cannot be null. Parameter name: key

View 1 Replies View Related

Default DateTime Parameter

May 21, 2008



I am trying to set the default date in my datetime parameter to yesterday's date, so the user does not have to select using the datepicker calendar. I am using Visual Studio 2005.

I put the following code into the Report Parameters non-queried default values function line, but it adds the timestamp to the date.

=DateAdd(?d?, -(WeekDay(Now()))+1, Now())


How can I get yesterday's date to default but without the timestamp?

Thanks!

Marissa

View 6 Replies View Related

Is There A Way To Default DateTime Parameter To Blank?

Jul 13, 2007

I have a visible DateTime parameter on the Report that I would like to make optional.

When I open up the report and try to run it without specifying the date I get a validation error that parameter is required. If I set default value to null - it works, but I have to check for both '' and NULL in my query:

StartDateTime >= @StartDate OR @StartDate='' OR @StartDate IS NULL

I tried setting default parameter using expression
=''
but I get an error that
'Default Value' of parameter 'StartDate' doesn't have expected time.

So the question is can I set DateTime parameters' default value to blank?

View 7 Replies View Related

Datetime Report Parameter Default Value

Jul 10, 2007

Issue 1:

I have a report parameter StartDateTime. I set the default value to Now(). When I go to preview, the StartDateTime parameter is empty and its been locked. I am not even able to set it to different value in preview.



Can anyone help me how to set the datetime parameter to default value(Now).



Issue 2:

I have a stored procedure which takes StartDateTime parameter. Whenever the report refreshes using autorefresh interval, the startdatetime should default to Now. Right now the startdatetime defaults to whatever the value is there before i hit view report. how to do that using stored procedure.



Thanks fro your help.

View 5 Replies View Related

DateTime Parameter With NULL Value

Apr 8, 2008

Hi,
I have a report with datetime parameter which is required to be optional (there should be an option not to select this parameter which would cause in not narrowing result of this report by this parameter).

I used datetime parameter (to have the calendar control for selecting date) for which I enabled NULL value. The result is that next to this parameter there is a checkbox "NULL" which allows to send NULL as a value of this parameter. Everything is fine except for the prompt: "NULL"... Is there a way to change it? I would see there something like "Empty" or "Not selected", which would be understandable for users of the report.

Or is there any other way to send an empty date as a value of this parameter? (Setting some unusual value like 1/1/1900 for empty date is not sufficient as the empty value shouldn't appear in the parameter control).

Thank you,
Michal

View 9 Replies View Related

Set NULL To Datetime Parameter

Dec 14, 2006

Hi All,

I have a problem while trying to set "NULL" value to my datetime parameters.

I have two datetime parameters (AllowNull=True) on my report. (BeginDate and EndDate)

it works fine in preview mode in reporting design.

The problem occurs, if I try to set an emtpy value to these parameters in my asp.net application.

The code looks like;

Dim repParams(1) As ReportParameter

repParams(0) = New ReportParameter("BeginDate", String.Empty)

repParams(1) = New ReportParameter("EndDate", String.Empty)

-----

ReportParameter method requires String parameters. If user set any datetime value, I am sending "String.Empty" value to my paramaters in order to set them as NULL. But I am getting "rsReportParameterTypeMismatch Error."

How Can I set NULL value to these parameters from asp.net application?

Thans alot in advance.

View 9 Replies View Related

CANT We Set Default Value Null To Parameter In Stored Procedure

Feb 18, 2008



Hello

I've written a stored procedure with 4 parameters

create procedure dummy
( @a int, @b int, @c varchar(50), @d varchar(50))

now from front end(I'm using c#.net)
I want to send the values according to some criteria
So in the process...I've only values for @a & @c ...

so In order to reduce the code of sending Null values explicitly to other parameters...

can't I set like default values for it so that If I don't send values to certain parameters it will have the default value or Null value.

like I want something like this:

create procedure dummy
( @a int NULL, @b int NULL, @c varchar(50) NULL, @d varchar(50) NULL)

View 1 Replies View Related

Reporting Services :: Preview Has One Extra Parameter Than Parameter List - SSRS

Aug 21, 2015

I am working on existing ssrs report. When I see the preview I could see the extra parameter than the actual parameter. 

How do I know , when this parameter is coming in the preview ?

View 5 Replies View Related

Reporting Services :: Multi-value Parameter Not Passing In Subreport Parameter List

Jul 29, 2015

I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.

Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..

=join(parameter!user_id!value,",") which pass selected value to chart 

And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .

View 2 Replies View Related

Reporting Services :: Hide / Unhide A Parameter Based On Another Parameter?

Oct 18, 2015

I am using reporting services 2012, Can we make visibility of report parameter dynamic, ie can we make parameter visible or hide on certain condition or its visibility depends on other parameters Is this feature  available in any other updated version of ssrs? 

View 2 Replies View Related

Reporting Services :: Displaying Report Parameter Based On Another Parameter

Aug 10, 2015

I am using report builder 3.0.

I have a report parameter called para1 which is a drop-down list and what I want to do is display another report parameter based on the para1 selection.

So for example, para1 contains a, b, c choices.  if a user selects b, I would like para2 to display but if the user selects a or c, I don't want the para2 to display.

View 5 Replies View Related

Reporting Services :: Passing Parameter Via URL Using Javascript - Missing Parameter Value

Dec 3, 2015

Using SQL Server 2008R2 and Report Builder 3.0..I have an action set in a text box of a table. My intent is to pass the value of that text box (which is variable) to a sub-report in a popup window. Here's my code: URL....The parameter of the report I'm trying to open is @SONum.I'm guessing my error is involved in the formatting of how the value of the parameter is being passed. I've also seen examples where the report server and report values were parameterized, but I don't know where to define

Parameters!ServerAddress.Value anywhere.Do I need to have something set up a certain way within the report I'm opening? Here's the report Parameter settings on the report I'm trying to open.

View 3 Replies View Related

Reporting Services :: Adding Dataset Parameter Doesn't Add Report Parameter In Visual Studio 2008 SSRS

Apr 22, 2015

I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter.  If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank.  However, sometimes this will automatically add. 

Is this a bug in Visual Studio?  How do I get around this? 

View 3 Replies View Related

Define Default For Date Report Parameter / Analysis Services

May 30, 2007

I have a report which will one day display some data from an analysis services cube. my first step is to create a drop down parameter enabling the user to choose the date. I'd like to display only dates that have data, and I'd like it to default to today.



So I've created a dataset that will be the datasource for the dropdown displaying the available non-empty dates, which works fine.



SELECT measures.turnover ON COLUMNS,

nonempty([TBL DIM DATE].[DATE_ONLY].[DATE_ONLY].ALLMEMBERS ) ON ROWS

FROM [Itdev1 Hk]



I've also set the report parameter up to be a queried paramter,and to use the above dataset as it source, with [DATE_ONLY] displayed. and [DATE_ONLY] as the value.

Now, how do I get it to default to the last valid member in the list?

View 6 Replies View Related

Setting Default Dates In Reporting Services

Mar 26, 2008

Thought I'd help some folks with rs and dates..

here is some scalar valued functions:



CREATE FUNCTION [dbo].[get_date_only] (@date datetime)
RETURNS datetime AS
BEGIN
RETURN dateadd(day, DateDiff(day, 0, GetDate()), 0)
END

CREATE FUNCTION [dbo].[get_month_end] (@date datetime)
RETURNS datetime AS
BEGIN
RETURN dateadd(ms, -3, dateadd (m,datediff(m,0,
dateadd(m,1,@date)),0))
END

CREATE FUNCTION [dbo].[get_month_start] (@date datetime)
RETURNS datetime AS
BEGIN
RETURN dateadd(m,datediff(m,0, @date),0)
END

CREATE FUNCTION [dbo].[get_today_end] (@today datetime)
RETURNS datetime AS
BEGIN
return dateadd(ms, -3, datediff(d,0,dateadd(d,1,@today)))
END

CREATE FUNCTION [dbo].[get_today_noon](@date datetime)
RETURNS datetime
BEGIN
RETURN DATEADD(hh, 12, DATEADD(d,DATEDIFF(d,0, @date),0))
END

CREATE FUNCTION [dbo].[get_today_start] (@today datetime)
RETURNS datetime AS
BEGIN
return dateadd(day, 0, datediff(d,0,@today))
END

CREATE FUNCTION [dbo].[get_tomorrow_noon](@date datetime)
RETURNS datetime
BEGIN
RETURN DATEADD(hh, 12, DATEADD(d,DATEDIFF(d,-1, @date),0))
END

CREATE FUNCTION [dbo].[get_week_end] (@date datetime)
RETURNS datetime AS
BEGIN
return dateadd(yyyy, datepart(yyyy,
dateadd(weekday,7-datepart(weekday, @date),@date))-1900, 0)
+ dateadd(ms, -3,
dateadd(dy, datepart(dy,
dateadd(weekday,7-datepart(weekday, @date),@date)),0) )
END

CREATE FUNCTION [dbo].[get_week_start] (@date datetime)
RETURNS datetime AS
BEGIN
return dateadd(yyyy, datepart(yyyy,
dateadd(weekday,1-datepart(weekday, @date),@date))-1900, 0)
+ dateadd(dy, datepart(dy,
dateadd(weekday,1-datepart(weekday, @date),@date))-1,0)
END

CREATE FUNCTION [dbo].[get_weekday_end] (@weekday tinyint,
@date datetime)
RETURNS datetime AS
BEGIN
return dateadd(yyyy, datepart(yyyy,
dateadd(weekday,@weekday-
datepart(weekday, @date),@date))-1900, 0)
+ dateadd(ms, -3,
dateadd(dy, datepart(dy,
dateadd(weekday,@weekday-datepart(weekday, @date),
@date)),0) )
END

CREATE FUNCTION [dbo].[get_weekday_start] (@weekday tinyint,
@date datetime)
RETURNS datetime AS
BEGIN
return dateadd(yyyy, datepart(yyyy,
dateadd(weekday,@weekday-
datepart(weekday, @date),@date))-1900, 0)
+ dateadd(dy, datepart(dy,
dateadd(weekday,@weekday-datepart(weekday, @date),
@date))-1,0)
END

CREATE FUNCTION [dbo].[get_year_start] (@date datetime)
RETURNS datetime AS
BEGIN
RETURN DATEADD(year,DATEDIFF(year,0, @date),0)
END

CREATE FUNCTION [dbo].[get_yesterday_end] (@today datetime)
RETURNS datetime AS
BEGIN
return dateadd(ms, -3, datediff(d,0,@today))
END

CREATE FUNCTION [dbo].[get_yesterday_start] (@today datetime)
RETURNS datetime AS
BEGIN
RETURN dateadd(day, -1, datediff(d,0,@today))
END


Then create a Table-Valued Function like so:


CREATE FUNCTION [dbo].[udfCommonDates] (@date datetime)
RETURNS @t table (week_start datetime,
week_end datetime,
lastweek_start datetime,
lastweek_end datetime,
month_start datetime,
month_end datetime,
lastmonth_start datetime,
lastmonth_end datetime,
yesterday_start datetime,
yesterday_end datetime,
today_start datetime,
today_end datetime,
thisweek_monday_start datetime,
thisweek_monday_end datetime,
year_start datetime,
year_end datetime,
tomorrow_noon datetime,
today_noon datetime,
date_only datetime)
BEGIN
INSERT @t
SELECT
dbo.get_week_start ( @date ) AS week_start,
dbo.get_week_end ( @date ) AS week_end,
dbo.get_week_start ( DATEADD(d, -7, @date ) ) AS lastweek_start,
dbo.get_week_end ( DATEADD(d, -7, @date ) ) AS lastweek_end,
dbo.get_month_start( @date ) AS month_start,
dbo.get_month_end ( @date ) AS month_end,
dbo.get_month_start ( DATEADD(m,-1, @date) ) AS lastmonth_start,
dbo.get_month_end ( DATEADD(m,-1,@date) ) AS lastmonth_end,
dbo.get_yesterday_start ( @date ) AS yesterday_start,
dbo.get_yesterday_end ( @date ) AS yesterday_end,
dbo.get_today_start (@date) AS today_start,
dbo.get_today_end ( @date ) AS today_end,
dbo.get_weekday_start(1,@date) AS thisweek_monday_start,
dbo.get_weekday_end(1,@date) AS thisweek_monday_end,
dbo.get_year_start(@date) AS year_start,
dbo.get_year_end(@date) AS year_end,
dbo.get_tomorrow_noon(@date) AS TomorrowNoon,
dbo.get_today_noon(@date) AS TodayNoon,
dbo.get_date_only(@date) AS DateOnly
RETURN
END


Now the RS folks might be thinking but how does this help me as I need a dataset and a dataset can only be based on a Stored Procedure or a direct table. No problem create the following stored procedure:


CREATE PROCEDURE [dbo].[uspCommonDates] AS
begin
set datefirst 1
declare @date datetime
set @date = getdate()
select * from dbo.udfCommonDates(@date)
end


Now you've got a stored procedure to use as a dataset...Now in reporting services add a new dataset:



Now go to the report parameters section of the report:



Now pick that dataset dsFunctions (or whatever you called it) and then pick any of the value fields from the scalar functions such as:



Now when you run the report it uses the scalars:



If you have questions feel free to ask :).

Hope this helps someone

View 2 Replies View Related

Reporting Services :: Default Landscape Print

Jul 25, 2008

I am trying to set default print settings for a report on Reporting services.

I need to make to make a page print out on landscape by default.
 
I cant seem to find this option anywhere.

View 7 Replies View Related

Reporting Services :: Default To First Day Of Month in SSRS Expression

Apr 24, 2015

Is there any way to default to the first day of the month in a SSRS expression.  I'm looking to do the reverse of the EOMONTH() function.The date value is coming from a parameter @BegDate and formatted YYYY-MM-DD.  So if the parameter is set to 2015-08-31 it would show 2015-08-01

View 2 Replies View Related

Reporting Services Configuring Default Error Messages

Aug 8, 2007

I have searched the web and have not had any luck on finding the issue to my problem. I'm sure it's probably simple, so here it goes.

When receiving the following error "The permissions granted to user '' are insufficient for performing this operation"

Now, I would like to add to the error message shown above an extra line below it on the web page to reflect something like "Please contact XXX @ XXX if you feel that you need to have your login issue resolved" ...or something meaningful in addition to the default error messages.

I am not getting this error normally, as I have made a typo when login in on purpose! I am just trying to find a way to add more detail to the current error message or change the message to what I want it to say. This would go for any error message received by an end user received through SQL Server 2005 Reporting Services.

Do I have to create some sort of filter to read the message coming back from within SOAP? Are these messages stored in ReportingServices database or htm file?

Thanks!
ICE

View 4 Replies View Related

Setting Default Parameters Via The Reporting Services Viewer

Oct 23, 2007

HI,
I am trying to set the following default parameter : datepart("m",now()). The parameter is an integer

If I do this through visual studio 2005 it works just fine.
However I need to change this for a linked report and when I do the same thing in the viewer (using the "Overide Default" key) I get the following error
"The parameter Month contains a value that is not valid. This parameter takes an integer as a value"
Can anyone suggest a way to get arround this ?

View 2 Replies View Related

Reporting Services :: Default Previous Week Sunday

Aug 1, 2015

Is it possible to show previous week Sunday date as default in Date Parameter in Reports.

View 2 Replies View Related

Reporting Services :: Powerview Filter Default Value Dynamically

Oct 25, 2012

I created a tabular model, and used it as a source for the power view. Is there any possibility to set a dynamic default value for the filter. My model has a field named 'CalendarMonth', by default - filter should take current month. I would like to know is there any possibility with out changing the data in the source.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved