Rotate Text To Flow Vertically Instead Of Horizontally

Aug 23, 2007

Is it possible in the SSRS Report Designer to rotate a textbox to run vertically, or simply to rotate the text in a textbox ? I have only seen this done within axes lables of charts, but not text boxes.

Thanks in advance,
Kenny

View 1 Replies


ADVERTISEMENT

Store Data Horizontally Or Vertically?

Nov 11, 2005

My project is to automate testing of Stored Proceduresof type SELECT (at least for now).I want to create a table where each stored procedure'sinput parameter values are entered and in another tablethe expected result value(s) are entered when executedagainst a sample database containing manually enteredand verified data.My current problem is that the stored procedures' inputparameters range from none to 50 parameters (ok nowthat I think of it maybe this SP with 50 parameters is anINSERT SP; regardless let's assume I have SPs thatrequire 10-20-30+ parameters).My other problem is each stored procedures' returnedresult could fall into any of these four categories:- 1 row, 1 column- 1 row, many columns- many rows, 1 column- many rows, many columnsSo far I thought about 3 ways of storing the data:1- 1 large table with 50 columns that can hold variousnumber of input parameter values. Similar type of table forholding the output result for the four categories above.2- 1 small table holding one value per row. All kinds of joinswith other tables to indicate which SP and which column thevalue belongs to...3- 1 individual table per stored procedure, this way the numberof columns in the table would match exactly the number of inputparameters.Obviously the above 3 categories could apply both for the inputand output data.Now I'm still in research mode and I haven't decided on any choiceyet. And I know each approach has serious consequences; let's justsay they are all with some limitations.Has anyone dealt with this scenario before? This is the first time Ineed a table to hold various types of returned data.Just to give some numbers: possibly a few thousand SPs and verylikely each SP would have more than one test scenario.What would you suggest?Thank you

View 2 Replies View Related

Reporting Services :: Rotate Text Box Instead Of Text In The Box?

Jul 21, 2015

I need to rotate text box instead of text in the box. how do we achieve this in SSRS.

View 2 Replies View Related

Reporting Services :: How To Rotate Text 180 Degrees Without Using Images

Oct 13, 2011

I'm currently working on a report and have all the requirements taken care of save one. I need to flip my text 180 degrees. I have seen how to do this by making an image on the fly and then rotating the image, etc. And that is what we previously had in place.

Unfortunately the reports are getting so large (20 images on a page, 150 pages for the report) that the reports will not print in their entirety through Citrix and cuts off after about 120 pages.

I also tried using upside down fonts which won't work as they flip the letter on a X axis as opposed to rotating them along a pivot. Sadly we can't reduce the number of occurrences per page or decrease the page count. So those are not options. They were the first things I asked about.

View 6 Replies View Related

Basic Text File Data Flow Source

Jun 7, 2007

In DTS 2000 I had a situation where I had a text file as input source and text file as output source. On migrating the package to 2005 it puts a wrapper around it which executes it as a 2000 package, the rest of the tasks are neatly converted to 2005 style tasks. I presume this to mean that this will not be supported through to the next version, and there is no direct equivalent in 2005.



My question is how do I import a non-flat file source which has different numbers of columns per line. I did ,somehow, manage to do this with 2000 but cannot seem to get anywhere with 2005.



The flat file source seems to be expecting a common number of columns and just can't seem to cope with no column delimiters on some lines. If anybody knows different I would be glad to hear about it.



Raw data is not helpful to me as only works with a specific raw type (apparently)



Went onto Bulk Insert Task but got this message



[Bulk Insert Task] Error: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.Bulk load: An unexpected end of file was encountered in the data file.".



Have already browsed with this on web but only find comments about changing timeout setting.



Can find timeout settings in DataFlow source and DataFlow destinations but not in Bulk Insert Task.



As you can see this is a long and protracted question.



If the answer is simple I apologise if not blame Microsoft. Other than that have found SSIS has some nice improvements, apart from the odd vague error message I keep coming across.

View 13 Replies View Related

Some Problem In Data Flow While Upload A || Seperated Text File

Jul 25, 2006

I am facing one problem with sql 2005 SSIS while uploading a "||" seperated text file with Data Flow in SSIS.Below I am giving the sample data of the text file

data||data||data

data||data||data

When I uploaded it using sql 2000 DTS it was not giving and it was being uploaded into the table but when I tried with SQL 2005 it is giving the below problem.

"[Flat File Source [1]] Error: Data conversion failed. The data conversion for column "Column 2" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.". "



View 10 Replies View Related

Specifying That Encryption Should Not 'rotate The IV

Aug 22, 2007

There has been a great deal of discussion around searching on encrypted columns.

Is there a way to 'disable' the fact that IVs and other info are changed for each set of clear text to be encrypted?

This would introduce a certain level of weakness, I know. but in my mind, security is all abour risk assessment, which includes the cost of implementing security.

To me, the cost of not being able to search on an encrypted string is higher than mitigating against the chance that someone could brute force decrypt AES 256 - if this makes sense.

Thanks,

...Andrew

View 1 Replies View Related

SSIS Data Flow Task Fails To Load All Text From Flat File

Jan 2, 2007

Hi Guys,

I
have a flat file which is loaded into the database on a daily basis.
The file contains rows of strings which I load into a table,
specifically to a column of length 8000.

The string has a length of 690, but the format is like 'xxxxxx xx xx..'
and so on, where 'xxxx' represents data. So there are spaces, etc present in the middle.

Previously
I used SQL 2000 DTS to load the files in, and it was just a Column
Transformation with the Col001 from the text file loading straight to
my table column. After the load, if I select len(col) it gives me 750
for all rows.

Once I started to migrate this to SSIS, I
allocated the Control Flow Task and specified the flat file source and
the oledb destination, and gave the output column a type of String and
output column width of 8000. But when I run the data flow task it
copies only 181 or 231 characters out of the 750 required.
I feel it stops where it finds the SPACES and skips the rest.

I
specified row delimiters or CR, and LF. I checked the file under
UltraEdit and there were no special characters in the file that would
cause the problem.

Any suggestions how I can get it to load the full data?

Thanks

View 26 Replies View Related

Rotate Single Row Into Two (key, Value) Columns

Jan 30, 2007

 

Hi,

How can I convert this results :





col 1

col 2

col 3

col 4

col 5

col 6

col 7




val 1

val 2

val 3

val 4

val 5

val 6

val 7



into this






Col 1

val 1




Col 2

val 2




Col 3

val 3




Col 4

val 4




Col 5

val 5




Col 6

val 6




Col 7

val 7

View 6 Replies View Related

Rotate SQL Server Tables

Feb 3, 2003

Is there a way to rotate db tables - i.e. to pivot them?

Thanks,

Bianca

View 2 Replies View Related

How To Rotate Or Flip Table.

May 12, 2005

I have a key value pair as listed below.

Key value
------ ----------
name rob
age 30
sex male
... ...
... ...

would like to see a result set like below.

name age sex ...
---- --- ---- -----
rob 30 male ...

Note: the number of key value pairs are unknown.

View 3 Replies View Related

Merge Cells Vertically

Jan 3, 2007



Any way to merge cells vertically in SSRS 2005? I know w can do it horizontally by right clik, then select "merge cells". How about vertically? Thanks.

View 3 Replies View Related

How To Merge Table Vertically

May 31, 2007

Hello,

I have two tables with 250 columns each and I have a common column between the two. I need to merge them vertically to make it a bigger table. I mean I need a table with 500 columns. Both the tables have same no. of rows. I am lost on how to go about it. Any help would be really great.

View 1 Replies View Related

Integration Services :: Handling Empty Text File Load Into Table Through SSIS Data Flow?

Jun 16, 2015

We have created SSIS package to load a text file into a table. Source system shares 10 text files and recently they stopped generating data for one of the text file (comping empty), after few months they will start generating the data for the empty file batch processing. 

The Issue here is Data Flow task is getting failed while loading empty text file into table. How to handle this empty file load issue in SSIS package.

View 3 Replies View Related

Display Query Result Vertically

Mar 27, 2008

Hi,

I have a query to run, but the data in the tables are stored horizontally. I want the query to output the result vertically.

e.g. if row 1 contains the following data:
custA,3-april2008,mango's,123,456,78,10

Then i want it to output as follows:
custA,3-april2008,mango's,123
custA,3-april2008,mango's,456
custA,3-april2008,mango's,78
custA,3-april2008,mango's,10

hope I'm clear, and would appreciate if someone could help me.

Thanks

View 3 Replies View Related

Printing Column Contents Vertically

Jun 15, 2007

Hi All,

I would like to print a report that is 64x64 matrix. I want the columns to be narrow and the headings for the columns to be vertical like is possible in excel. The text for the heading fields also comes from a stored procedure.



I have hunted and pecked around but I cannot seem to find an option that sets the orientation of the text for a text box to vertical.



Is there one?



If not, does anyone have a suggestion as to how I can make these column headings vertical and nicely fomatted all the time? Again, looking for the same effect as in excel.



Thanks

View 4 Replies View Related

Rotate View - Show Result With 3 Columns In 1 Row

Jan 19, 2012

I have a view with 2 columns and 2 rows(No 1). I want to show the result with 3 columns in 1 row(No 2).

No1:
The view result :
ID | SubjectID
-- ---------
13279 | 900
13279 | 910

No2:
I want to show that result in this structure :
ID | SubjectID | SubjectID2
-- --------- ----------
13279 | 900 | 910

View 1 Replies View Related

Reporting Services :: Rotate Textbox 45 Degrees

Apr 3, 2012

We want to rotate the textbox 45 degrees. When I use properties/writing mode, change it to "Rotate270", the normal textbox "This is not"

becomes the following

But we want to rotate it like below, is there a way to do this in BIDS? I found this thread but not working

[URL] ...

View 5 Replies View Related

Attempt FASTLOAD If Error Perform Regular Data Flow Transfer And Redirect Errors To Text File

Feb 15, 2008



I'm having problems designing a package to attempt to execute a fast load data transfer but failback to regular speed with error redirection in the event of an error.

The way I designed this was to add one data flow task to my package called "DFT FASTLOAD". The data flow copies a table SRC to another table DEST in the same SQL Server database. In the error handler for the data flow task I copied the original data flow task and changed the name to "DFT REGULARLOAD with Error redirection". In this data flow task I did not use fast load and addtionally redirected errors to a text file.

In the Data Flow Task "DFT FASTLOAD". I am copying from a varchar source field(with non-date strings) to a datetime destination field to force errors. However the Data Flow Task "DFT REGULARLOAD with Error redirection" never seems to start transferring data from source to destination. The data Flow Task "DFT REGULARLOAD with Error redirection" turns yellow (after the error occurs in "DFT FASTLOAD"), but no data is being transferred). It seems like it hangs.

Do I need to increase the MaximumError Count or something? The data flow task "DFT FASTLOAD" does not turn red when the error occurs it just remains yellow, so i assume I'm on the right track since it seems the error is caught.

I have added screenshots ... hopefully these screenshots will clarify my problem.

DESIGN:
http://i256.photobucket.com/albums/hh179/abzbank/DESIGN_FASTLOAD1.jpg
http://i256.photobucket.com/albums/hh179/abzbank/DESIGN_FASTLOAD2.jpg
http://i256.photobucket.com/albums/hh179/abzbank/DESIGN_FASTLOAD3.jpg
http://i256.photobucket.com/albums/hh179/abzbank/DESIGN_FASTLOAD4.jpg
http://i256.photobucket.com/albums/hh179/abzbank/DESIGN_FASTLOAD5.jpg
http://i256.photobucket.com/albums/hh179/abzbank/DESIGN_FASTLOAD6.jpg


RUNTIME:
http://i256.photobucket.com/albums/hh179/abzbank/RUN_FASTLOAD7.jpg
http://i256.photobucket.com/albums/hh179/abzbank/RUN_FASTLOAD8.jpg
http://i256.photobucket.com/albums/hh179/abzbank/RUN_FASTLOAD9.jpg
http://i256.photobucket.com/albums/hh179/abzbank/RUN_FASTLOAD10.jpg
http://i256.photobucket.com/albums/hh179/abzbank/RUN_FASTLOAD11.jpg


I can provide more details if needed... but really this is just a basic test.
Any assistance would be appreciated!

View 9 Replies View Related

Query Editor: How To Display Individual Row Vertically

Nov 20, 2006

In query editor I displayed a single row from a table. The row is so long that I need to scroll horizontally back and forth to check out it's fields. Using t-sql (or otherwise) can I display the row like this: (vertically)



Field Name 1: < data value 1>

Field Name 2: < data value 2>

Field Name 3: < data value 3>

Field Name 4: < data value 4>

etc.



TIA,

barkingdog



View 5 Replies View Related

Transact SQL :: Left Join Returns Too Many Rows Vertically

Jun 18, 2015

I have a query that based 2 tables. I wrote a query with a left join on the base table but the result set returns multiple rows for each occurrence in the second table because of the left join. I want but to return all records  from on table A and only matching records from table B which id but I would wan tit to keep return them vertically as the because it make it difficult to read when put in a spreadsheet. It want it to return the values horizontally so the rows are not increasing for each occurrence on table b.

View 5 Replies View Related

Displaying My Querry Horizontally

Feb 22, 2008

Is there a way to display my querry horizontally? 

View 2 Replies View Related

Displaying Data Horizontally

Feb 7, 2008

In sql server, multiple instances of data default to a row display or vertical. I need a set of data in sql2005 to view horizontally so I can us it in a crystal report. Here is my issue.
gift.HonorKey, gift.HonorName, gift.HonorId
1211 Smith 1222
1244 Owens 4155

I need for the data to read like this:
HonorKey1, HonorKey2, HonorName1, HonorName2, HonorId1, Honorid2
1211 1244 Smith Owens 1222 4155

the table name is gift_view

I would like to be able to create a view in sql analyzer, then save as an SQL View
My direct email is jackfam@comcast.net

View 3 Replies View Related

Reporting Services :: Axis-X Labels Rotate 90° Doesn't Work

Jun 14, 2012

i would like to show all Labels available in a Chart and rotate the Labels 90°. How can i do that ? I changed the Propertie "Interval" to 1, "LabelsAngle" to 90, "LabelsAutoFitDisabled" to true in my Chart Axis.

View 12 Replies View Related

Reporting Services :: How To Repeat Matrix Vertically When Grouped By Column

May 18, 2015

I am using ssrs 2012 using sql server 2012. I have grouped by project name in the header now it is repeating horizontally i need to repeat it by vertically using project name  grouped by column.

I need this like below :

View 5 Replies View Related

Reporting Services :: Generate Data Vertically In Group By According To Dates?

Apr 27, 2015

I have a table in which records are inserted daily and with them i am storing the dates also. Now in SSRS i need to show the data for one week . The format should be like :

<style type="text/css">
.tg {border-collapse:collapse;border-spacing:0;}
.tg td{font-family:Arial, sans-serif;font-size:14px;padding:10px 9px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;}
.tg th{font-family:Arial, sans-serif;font-size:14px;font-weight:normal;padding:10px 9px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;}

[Code] ....

In above example Business Name , Phase, Activity will repeat lonely but its work description will be generated in next section according to that business name and that date. How to achieve this task ? I have referred : [URL] ....

View 6 Replies View Related

Reporting Services :: Merging Of Two Cells Vertically In SSRS 2012

Oct 5, 2015

I am new in SSRS 2012.I have created a rdl,in this rdl, am having a row group.In this report, other two columns has multiple rows and some rows having data and some other rows doesn't have data.So I want to create rows when the row of that particular column has any data or need to merge vertically with the  row having data and row don't have data of particular column along with the Common Row Group Data

View 5 Replies View Related

Display Query Results Horizontally One ID/row

Feb 6, 2003

I have a table where the ID column is a forign key as shown below:

select * from Joel_Table

IDID_Value
1One
2Two
3Three
1Four
2Five
3Six
1Seven
2Eight
3Nine
1Ten

Now, I order the result set based on the ID column:

select ID, ID_Value from Joel_Table
group by ID, ID_Value
order by ID, ID_Value

IDID_Value
1Four
1One
1Seven
1Ten
2Eight
2Five
2Two
3Nine
3Six
3Three

I want though to order the result set as one ID per row:
ID ID_Value ID_Value ID_Value ID_Value
1 Four One SevenTen
2 Eight Five Two
3 Nine Six Three

What is the best way of accomplishing this task?

Thank you much in advance -

View 2 Replies View Related

Horizontally Displaying Fields From 4 Views

Apr 1, 2014

I would like for each of the queries to have all of the selected fields shown horizontally in one table.

For example,
Commercial Created | Commercial Closed | Commercial UserId | Residential Created | Residential Closed | Residential UserId | Other Created | Other Closed | Other UserId.

Here is what I have now and it is displaying the fields as I would like them to. In the code below, each Views is acting as an individual table and then joined together to make another table when the query is executed.

WITH t1 AS (
SELECT vSalesReportProcessDetail.[RequestId]
,vSalesReportProcessDetail.Process
,vSalesReportProcessDetail.Entered
,vSalesReportProcessDetail.Closed
/*ROW_NUMBER() over (ORDER BY vSalesReportProcessDetail.[RequestId]) rn*/
FROM[Sales].[dbo].[vSalesReportProcessDetail]
WHERE Process = 'Commercial' ),

[code]....

View 1 Replies View Related

Merging Cells (horizontally) Depending On The Row

Apr 14, 2008

Is it possible to merge cells within several columns depending on the row number?

e.g.

colA colB colC colD

1 x a b c
2 y -------------------------

3 z -------------------------

for row # 2, #3, colB colC colD are merged.

View 7 Replies View Related

How To Get The Primary Keys And Display It Horizontally?

Jul 8, 2006

sample results: <MRNID=10002><VesselCode=VSL1>

wherein MRNID and VesselCode are primary keys of the table.

View 3 Replies View Related

UNION 2 Tables Horizontally, To One Table

Aug 5, 2007

Is it possible to combine the following tables:

Table1:
id
1
2
3

Table2:
licenses
3
2
1


To one table, like this:

id licenses
1 3
2 2
3 1

-There is always the same number of rows in both tables.

Thanks a lot!

View 9 Replies View Related

SQL Server 2014 :: How To Append Rows Horizontally

Nov 4, 2015

I'm trying to append rows horizontally - I'm using the "xml path" approach

SELECT
E.[USER_NAME] As 'User Name',
(
SELECT ',' + C.[PERMISSION_NAME]
FOR XML PATH('')
) As [Associated Groups]
FROM TABLEA As A
JOIN TABLEB AS B ON A.PK_OBJ_ID = B.FK_APP_OBJECT_REF
JOIN TABLEC AS C ON C.PK_PERMISSION_ID = B.FK_PERMISSION_REF
JOIN TABLED AS D ON D.FK_PERMISSION_REF = C.PK_PERMISSION_ID
JOIN TABLEE AS E ON E.PK_PERSONNEL_ID = D.FK_PERSONNEL_REF
WHERE A.[OBJECT_NAME] = 'MyObjectName'

It's not working. I'm getting:

User nameAssociated Groups
A. SmithG1
A. SmithG2
A. SmithG3
etc...

What I'm looking for is:

User NameAssociated Groups
A. SmithG1, G2, G3
etc...

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved