SELECT @@IDENTITY Using System.Data.SqlServerCe?

Mar 29, 2007

Hi! I am having a problem getting the inserted id from a table.

Here is the table:

/*********************** Companies **********************************/
CREATE TABLE Companies(
CompanyId int IDENTITY(1,1) PRIMARY KEY,
Description nvarchar(30) NOT NULL
)
GO

When I type SELECT @@IDENTITY in SQL Management Studio after a successful insert, it works fine. However, in code (System.Data.SqlServerCe), I get an error using this code:


SqlCeCommand cmd = conn.CreateCommand();

cmd.CommandText = sql;

cmd.CommandType = System.Data.CommandType.Text;

ret = (int)cmd.ExecuteScalar();

I saw a thread with this solution, but do I really have to go to this trouble?

DECLARE @MyTable table
( MyIdentity int )
INSERT INTO Employees ( FirstName, LastName )
OUTPUT inserted.EmployeeID INTO @MyTable
VALUES ( 'Bill', 'Smith' )
SELECT MyIdentity
FROM @MyTable



scope_identity does not seem to work either. Am I missing something?



Thanks!

Michael

View 11 Replies


ADVERTISEMENT

Could Not Load Type 'System.Data.SqlServerCe.SqlCeDataAdapter' From Assembly 'System.Data.SqlServerCe'

May 10, 2006



Hi,

I am trying to make a mobile application work, but I get the following error. The operating system on Pocket PC is Microsoft® Windows Mobile„¢ 2003 Second Edition. Any ideas? Thanks in advance.

The followings are the error and my codes:

System.TypeLoadException was unhandled
Message="Could not load type 'System.Data.SqlServerCe.SqlCeDataAdapter' from assembly 'System.Data.SqlServerCe, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91'."
StackTrace:
at SQLMobile.Form1.Form1_Load()
at System.Windows.Forms.Form.OnLoad()
at System.Windows.Forms.Form._SetVisibleNotify()
at System.Windows.Forms.Control.set_Visible()
at System.Windows.Forms.Application.Run()
at SQLMobile.Form1.Main()



Codes:

Private Sub FillGrid()

Dim filename As New String _

("Program FilesSQLMobilesqlmobile.sdf")

Dim conn As New SqlCeConnection("Data Source=" + filename)

Dim selectCmd As SqlCeCommand = conn.CreateCommand()

selectCmd.CommandText = "select Destination from flightdata"

Dim adp As New SqlCeDataAdapter(selectCmd)

Dim ds As New DataSet()

adp.Fill(ds)

DataGrid1.DataSource = ds

End sub

View 1 Replies View Related

System.Data.SqlServerCe

Aug 8, 2007

Sorry being a little vague but if you can point me in the right direction.
I have just created a new VB €“ Windows Mobile 5.0 pocket PC €“ Device Application. (which will be connected to a PDA)

Do i have to use System.Data.SqlServerCe or System.Data.SqlClient to connect to my db.

View 1 Replies View Related

Problem With System.Data.SqlServerCe.dll

Oct 11, 2006

I believe I've encountered a compatability problems with Visual Studion CF 2, specifically with the System.Data.SQLServerCE reference when trying to run (in debug mode - Pocket PC 2003 emulation). The environment is configured as follows:

Visual Studio 2005 - Compact Framework 2.0.50727

Microsoft SQL Server 2005 Mobile Edition

The (VB) project includes the following references:

System.Data.dll V2.0.000 from Program FilesMicrosoft Visual Studio 8Smart DevicesSDKCompact Framework2.0V2.0WindowsCE

System.Data.SqlServerCE.dll V3.0.5214.0 from Program FilesMicrosoft SQL Server Mobile EditionDeviceMobileV3.0

The IDE does not sense any problems with the following code until I try to run it in debug mode using the Pocket PC 2003 emulator. The code :

Imports System

Imports System.IO

Imports System.text

Imports System.Data

Imports System.Data.SqlServerCe

Public Class Form1

Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click

MsgBox("Will Test SQL")

Call testSQL()

End Sub

Private Sub testSQL()

Dim strConn As String = "Data Source = Test.sdf; Password = <password>"

Dim CEEngine As New SqlCeEngine(strConn)

CEEngine.CreateDatabase()

CEEngine.Dispose()

Dim Conn As SqlCeConnection = Nothing

Conn = New SqlCeConnection(strConn)

Conn.Open()

Dim cmd As SqlCeCommand = Conn.CreateCommand

cmd.CommandText = "CREATE TABLE MyTable (col1 int, col2 ntext)"

cmd.ExecuteNonQuery()

Conn.Close()

Exit Sub

ErrHandler:

MsgBox(Err.Number.ToString)

MsgBox(Err.Description.ToString)

End Sub

In the debugger, the program terminates at Dim CEEngine As New SqlCeEngine(strConn). The message displayed is

Can't find PInvode DLL 'sqlceme30.dll'

I've tried referencing a different version of System.Data.SqlServerCE.dll (from Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDE but the program will not even deploy to the emulator with this reference.

I encounter a Deployment/and or registration failed wit error : 0x8973190e - There is not enough space on the disk.

What versions of the following should be used?

System.dll

System.data.dll

System.data.sqlserverce.dll











View 5 Replies View Related

System.Data.SqlServerCe Versions

Oct 2, 2007



Hello,

I've inherited a .NET CF 2.0 application at work that uses SQL CE, and as I'm digging into the build process, I'm getting confused about which version of SQL CE that is being used.

The project references System.Data.SqlServerCe (no hint path, just from wherever VS 2005 has it). When I look at the assembly in my project, the version shows up as 3.0.3600.0, but when I browse to the DLL's location on my hard drive (C:Program Files (x86)Microsoft Visual Studio 8SmartDevicesSDK\SQL ServerMobilev3.0System.Data.SqlServerCe.dll), right click the DLL and check the properties, the version shows up as 3.0.3600.0.

In our installation package, we install three SQL CE Cabs:
sqlce30.dev.ENU.ppc.wce5.armv4i.CAB
sqlce30.ppc.wce5.armv4i.CAB
sqlce30.repl.ppc.wce5.armv4i.CAB

When installed on the device, the Remove Programs dialog shows as "Microsoft SQL Mobile 2005..." is installed. We keep the cabs in a seperate location so they are not just pulled from anywhere on the hard drive.

However, when I install the same CAB files located at:
C:Program Files (x86)Microsoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev3.0wce500armv4i, the device shows "Microsoft SQL Mobile 2005 Compa...." is installed.

In my Add References dialog, System.Data.SqlServerCe has version 3.0.3600.0, runtime v2.0.50727

Some questions:
1. Is the version 3.0.3600.0 the same between 3.0 and 3.1?
2. Given a System.Data.SqlServerCe DLL, how can I tell if it is the 3.0 or 3.1 version?
3. When upgrading my project to use 3.1, is it enough simply to upgrade my build environment? Or should I need to change the references in my project? (It appears that the 3.1 DLLs have been placed into the default locations where VS 2005 is pulling them from). I'm using VS 2005 SP1 on Vista x64.


Thanks


View 4 Replies View Related

System.Data.SqlServerCE.dll Reference Causes Error ...

Feb 15, 2007

Hello All ...

I
am attempting to create a program that will run on the PocketPC 2003
environment. I have upgraded Visual Studio to SP1, I have installed SQL
Server Compact Edition on my development machine and I have installed
SQL Server Compact Edition Tools For Visual Studio on the development
machine.

I have created a new project Visual Basic - Smart
Device - Pocket PC 2003. I have created a form for user input. I build
and deploy the form to the Symbol Pocket PC to test - no connection to
data and it works.

I then add a reference to
System.Data.SqlServerCE.dll and rebuild and redeploy the application to
the handheld. When I attempt to open the form I receive the following
error:

psmPocket.exe
NotSupportedException
System.Drawing.Bitmap

at
System.Resources.ResourceReader.LoadObjectV2() at
System.Resources.ResourceReader.LoadObject() at
System.Resources.RuntimeResourceSet.GetObject() at
System.Resources.ResourceManager.GetObject() at
System.Resources.ResourceManager.GetObject() at
pmsPocket.frmSetSOPType.InitializeComponent() at
psmPocket.frmSetSOPType..ctor() at
System.Reflection.RuntimeContructorInfo.InternalInvoke() at
System.Reflection.RuntimeContructorInfo.InternalInvoke() at
System.Reflection.ContrcutorInfo.Invoke() at
System.Activator.CreateInstance() at MyForms.Create__Instance__() at
MyForms.get_frmSetSOPType() at psmPocket.SetSOPType.Main()

Now
the confusing part is that I haven't changed any of the forms or the
code behind the forms, I have simply added the reference to the project.

Any idea why adding the reference to System.Data.SqlServerCE.dll would cause the system to start generating these errors?

I've
checked, the install process has loaded the .NET 2 framework to the
handheld. And as indicated at the beginning of this message, the
application showed the form prior to my adding the reference.

Thoughts?

Thanks ...

View 3 Replies View Related

How To Use Db Provider Factories With System.Data.SqlServerCe

Jul 7, 2007

I'm using SQL Server Compact Edition, but in the future I would like to be able to switch to another SQL Server Edition or even a different database. To achieve this, Microsoft recommends using DB Provider Factories (see: Writing Provider Independent Code in ADO.NET, http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=674426&SiteID=1).I enumerated the available data providers on my PC with:



Code Snippet

System.Reflection.Assembly[] myAssemblies = System.Threading.Thread.GetDomain().GetAssemblies();

The important entry is:"SQL Server CE Data Provider"".NET Framework Data Provider for Microsoft SQL Server 2005 Mobile Edition""Microsoft.SqlServerCe.Client""Microsoft.SqlServerCe.Client.SqlCeClientFactory, Microsoft.SqlServerCe.Client, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"When executing:




Code SnippetdataFactory = DbProviderFactories.GetFactory("System.Data.SqlServerCe");


I got at first this error run time message: Failed to find or load the registered .Net Framework Data Provider.I added a reference to "Microsoft.SqlServerCe.Client" at C:ProgrammeMicrosoft Visual Studio 8Common7IDEMicrosoft.SqlServerCe.Client.dll and the program runs.Of course, it uses "Microsoft.SqlServerCe.Client" instead of "System.Data.SqlServerCe". Laxmi Narsimha Rao ORUGANTI from Microsoft writes in the post "SSev and Enterprise Library" that "Microsoft.SqlServerCe.Client" is not meant to be used and that we should add the following entry to the machine.config file:




Code Snippet<add name="SQL Server Everywhere Edition Data Provider" invariant="System.Data.SqlServerCe" description=".NET Framework Data Provider for Microsoft SQL Server Everywhere Edition" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />


After changing the code to:


Code Snippet

dataFactory = DbProviderFactories.GetFactory("Microsoft.SqlServerCe.Client");

I get the same error message as before, even after adding a reference to "System.Data.SqlServerCe" at C:ProgrammeMicrosoft Visual Studio 8Common7IDESystem.Data.SqlServerCe.dll.Any suggestion what I should do ? Just use "Microsoft.SqlServerCe.Client" ? Anyway, I don€™t like the idea that I have to change the machine.config file, since I want to use click once deployment.

View 5 Replies View Related

System.data.sqlserverce.dll Problem -- Its Very Urgent

Dec 18, 2006

hi,

 We are facing a problem with compact framework 1.0 and SQL CE on windows mobile 5.0 smart phone (Motorola Q).

The application was build for Windows Mobile 5.0. When we use €œSystem.Data.SQLServerCE.dll€? from €œC:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev3.0€? in compact framework 2.0 it works fine.

Since Motorola Q has .Net Compact Framework 1.0 we need to port same application to compact framework 1.0. There is similar DLL in "C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev2.0" but it is not working, it gives runtime error missing method at very first line of code SqlCeEngine _eng = new SqlCeEngine().

 

Thanks & regards,

Rashmi

 
 

View 3 Replies View Related

Problem With Referencing System.Data.SqlServerCE.dll

May 31, 2007

Hello



I have referrenced System.Data.SqlServerCE.dll to my web project in order to create a .sdf file. I haven't wrote any code,just referenced it. When I build the project I get this error:



Error 2 'System.Data.SqlServerCe, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' cannot be loaded.

View 2 Replies View Related

Why System.Data.SqlserverCe.Dll Doesn't Appear In VS2005

Apr 25, 2006

Hi all,

Why System.Data.SqlserverCe.Dll doesn't appear in VS2005. In VS2003 System.Data.SqlserverCe.Dll appear to write winCE application. But it won't appear in VS2005 while am selecting PocketPc application. any body gimme the solution.

Thanks

Nat Raja

View 7 Replies View Related

System.Data.SQLServerCE.dll Reference Generates Error

Feb 14, 2007

Hello All ...I
am attempting to create a program that will run on the PocketPC 2003
environment. I have upgraded Visual Studio to SP1, I have installed SQL
Server Compact Edition on my development machine and I have installed
SQL Server Compact Edition Tools For Visual Studio on the development
machine.I have created a new project Visual Basic - Smart
Device - Pocket PC 2003. I have created a form for user input. I build
and deploy the form to the Symbol Pocket PC to test - no connection to
data and it works.I then add a reference to
System.Data.SqlServerCE.dll and rebuild and redeploy the application to
the handheld. When I attempt to open the form I receive the following
error:psmPocket.exeNotSupportedExceptionSystem.Drawing.Bitmapat
System.Resources.ResourceReader.LoadObjectV2() at
System.Resources.ResourceReader.LoadObject() at
System.Resources.RuntimeResourceSet.GetObject() at
System.Resources.ResourceManager.GetObject() at
System.Resources.ResourceManager.GetObject() at
pmsPocket.frmSetSOPType.InitializeComponent() at
psmPocket.frmSetSOPType..ctor() at
System.Reflection.RuntimeContructorInfo.InternalInvoke() at
System.Reflection.RuntimeContructorInfo.InternalInvoke() at
System.Reflection.ContrcutorInfo.Invoke() at
System.Activator.CreateInstance() at MyForms.Create__Instance__() at
MyForms.get_frmSetSOPType() at psmPocket.SetSOPType.Main()Now
the confusing part is that I haven't changed any of the forms or the
code behind the forms, I have simply added the reference to the project.Any idea why adding the reference to System.Data.SqlServerCE.dll would cause the system to start generating these errors?I've
checked, the install process has loaded the .NET 2 framework to the
handheld. And as indicated at the beginning of this message, the
application showed the form prior to my adding the reference.Thoughts?Thanks ...

View 1 Replies View Related

Could Not Load File Or Assembly 'System.Data.SqlServerCe'...

Nov 30, 2005

I am trying to use SQL Mobile 2005 with Visual Studio 2005.  I have a simple sql mobile db i created and am trying to test connectivity to the DB in a simple app.  I added the reference to the SqlServerCE and the verison # that is shown in properties is 3.0.3600.0, but when i look at the physical DLL in explorer (found at C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev3.0) the version # is 3.0.5206.0, so when i compile and run the test, I get :

View 7 Replies View Related

System.Data.SqlServerCe Desktop Vs Compact Framework

Aug 7, 2007

How can I tell if the System.Data.SqlServerCe assembly I am referencing is meant for Desktop use as opposed to Compact development? We are using NUnit as our testing framework and I get the following error when I attempt to execute nunit-console on my test fixture referencing SqlServerCe:

System.IO.FileLoadException : Could not load file or assembly 'System.Data.SqlServerCe, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) ---->

System.IO.FileLoadException : Could not load file or assembly 'System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral, PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)


The unit tests run fine from inside of Visual Studio using the Resharper Unit Test Runner...

Matt

View 1 Replies View Related

How To Find Correct System.Data.SqlServerCe.dll In Desktop Project?

Feb 2, 2008

Hi,
I am working on a .dll which need to access .sdf ( sql server mobile db). In my project, I added a reference "System.Data.SqlServerCe.dll". The dll is located in C:Program FilesMicrosoft Visual Studio 8Common7IDE.
I am able to compile the project. Then I created a Unit project for this dll file. In Unit project, I added the same reference.
Now the magic things happen. The compiling was failed. I got "Error 1 The type 'System.Data.Common.DbConnection' is defined in an assembly that is not referenced. You must add a reference to assembly 'System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'. C:VS2005MobileDBUnitMobileDBProjectUnitMobileDB.cs 50 13 UnitMobileDBProject".

I don't understand how come the same .dll could pass in a dll project but failed in unit test project. And I never saw the System.Data.SqlServerCe display in ".Net" Section of Add reference. But in my office, I installed same version of VS2005 for software tester. I could see the System.Data.SqlServerCe display in the ".Net" section of Add Reference.

Please help me to fix this problem. Thanks.

View 6 Replies View Related

Reference To Data.System.SqlServerCe In VS2005 Does Not Install CE 2.0 To Emulator/PDA

Feb 3, 2006

We have a Compact Framework 1.1 application that uses Sql Server CE 2.0. In VS2003, a reference to System.Data.SqlServerCe causes the Sql Server CE dlls and Query Analyzer to install to the Emulator or PDA.

I am currently converting the application to Compact Framework 2.0, but we are not upgrading to Sql Server Mobile (yet). However, the reference to System.Data.SqlServerCe, in VS 2005, no longer causes Sql Server CE to install to the PDA/Emulator.

There is a difference in the build outputs between VS2003 & VS2005. In 2003, System_SR_enu.cab, sqlce.wce4.x86.cab & sqlce.dev.wce4.x86.cab are copied & lanuched. In 2005, only System_SR_enu.cab is copied... no launch.

Any ideas? Reinstall VS2005?

View 3 Replies View Related

Could Not Load File Or Assembly 'System.Data.SqlServerCe, Version 3.5.0.0

May 8, 2008

We just upgraded our applications from VS 2005 to VS 2008 and discovered we had to convert our SQL Server CE databases. So I did that. I then included the sqlce...35.dlls in the application directory on my test computer as well as the System.Data.SqlServerCe.dll version 3.5.

sqlceca35.dll
sqlcecompact35.dll
sqlceer35EN.dll
sqlceme35.dll
sqlceoledb35.dll
sqlceqp35.dll
sqlcese35.dll

When I run the app and it tries to load the System.Data.SqlServerCe.dll I get the following error:
System.IO.FileLoadException: Could not load file or assembly 'System.Data.SqlServerCe, Version 3.5.0.0...or one of its dependencies. The located assembly's manifest definition does not match the assembly reference.

We have the application targeting the .NET Framework 2.0 and need to keep it that way for awhile.

Any ideas on how to resolve the error?

View 5 Replies View Related

System.Data.SqlServerCe.SqlCeCommand Has A Bug Related To SqlCeParameter Order That Causes Exceptions.

Jan 11, 2008

I came across a frustrating bug last week. Basically, whenever I tried to execute almost any sql query with unnamed parameters (i.e. using "?" instead of "@param_name" in the SQL text), an exception would be thrown.

After trying lots and lots of things and navigating my way through the internals of System.Data.SqlServerCe.dll, I discovered that the method System.Data.SqlServerCe.SqlCeCommand.CreateParameterAccessor(...) has a bug.

The bug is that the private arrays "parameters" and "metadata" are ordered differently, yet at one point in CreateParameterAccessor(...) they are compared using the same index. Here are the two lines:
p = this.parameters[ i ];
and
MetaData info = metadata[ i ]
and then the column data types of "info" & "p" are incorrectly compared in a later method, ValidateDataConversion(...).

So take a step back... how are they ordered differently? From observation, I concluded the following:
The "parameters" array is ordered exactly in the order that the DbParameter's were added to the DbCommand object.
The "metadata" array is ordered according to the column order of the table in the database.


So what causes the exception? Well, CreateParameterAccessor(...) passes data types from two different columns (one type taken from parameters[ i ] and the other from metadata[ i ]) on to SqlCeType.ValidateDataConversion(...). And, of course, if they differ (e.g. one column is of type DateTime and the other is a SmallInt), an exception is thrown.
I've found two workarounds, and both seem to work well.
The first is to name the SqlCeParameters (e.g. "SELECT ... WHERE id=@id"). This causes the buggy branch of code to be completely bypassed.

The second is to add the SqlCeParameters in the exact same order as the columns exist in the table you are accessing. Note, I do *not* mean the order that you select the columns (e.g. "SELECT column1, column2, ..."). I mean the actual order of the columns in the database.

I've included my setup and a stack trace below to help if it can.

My setup is:
.Net CF 3.5
SqlServer CE 3.5
Visual Studio 2008
Deployed to Pocket PC 2003

Here is the stack trace (note the variables passed to ValidateDataConversion):

System.Data.SqlServerCe.dll!System.Data.SqlServerCe.SqlCeType.ValidateDataConversion(System.Data.SqlDbType expectedType = DateTime, System.Data.SqlDbType actualType = SmallInt) + 0x4a bytes
System.Data.SqlServerCe.dll!System.Data.SqlServerCe.SqlCeCommand.CreateParameterAccessor(System.Data.SqlServerCe.MetaData[] metadata = {System.Data.SqlServerCe.MetaData[34]}) + 0x89 bytes
System.Data.SqlServerCe.dll!System.Data.SqlServerCe.SqlCeCommand.CreateDataBindings() + 0x5e bytes
System.Data.SqlServerCe.dll!System.Data.SqlServerCe.SqlCeCommand.CompileQueryPlan() + 0x16f bytes
System.Data.SqlServerCe.dll!System.Data.SqlServerCe.SqlCeCommand.ExecuteCommand(System.Data.CommandBehavior behavior = Default, string method = "ExecuteNonQuery", System.Data.SqlServerCe.ResultSetOptions options = None) + 0xa7 bytes
System.Data.SqlServerCe.dll!System.Data.SqlServerCe.SqlCeCommand.ExecuteNonQuery() + 0x7 bytes

View 1 Replies View Related

Referencing To System.Data.SqlServerCe Causes Large Files To Deploy To Emulator

Dec 8, 2006

Hello everyone,

This is my first time posting here, I hope this questions has not been asked before. I tried to search for it but I came not with nothing.

Recreating the error :

I am using VS2005. I created a Pocket PC 2003 project.
I have downloaded the SQL Server Compact Edition and installed it. I get the System.Data.SqlServerCe.dll file from the installation directory.
I reference to that DLL using Add Reference in VS2005.

Build it. In the Bin folder, a long list of files suddenly appears.

System.data.dll
System.data.oracleClient.dll
system.web.dll
system.enterpriseservices.dll
system.enterpriseservices.wrapper.dll
system.transactions.dll
and the rest of your original files in Bin

The worst of it all, all of these files are deployed into the Emulator! Causing it to run out of memory and unable to deploy.



Something is not right here, I just cannot figure it out! If this happens, each mobile devices can hold one applications. Thats not the way it should be, right?

If you have solved this before, do help. I am at my wits end at the moment.

Thanking you in advance.

Sincerely,
Lasker

View 1 Replies View Related

Could Not Load Type 'System.Data.Sqlserverce.sqlcecommand' Error In A PDA Application

Dec 25, 2007



Hi,

I am developing a Application using SQLCE Database & VS 2005 for Intermec CN3 PDA
It is having Windows Mobile 5.0 OS and ARM920T PXA27x Processor.

I have already installed
Microsoft .NET CF 2.0,
Microsoft SQL Client 2.0 ( using %Program Files%Microsoft SQL Server Compact Editionv3.1SDKinwce500armv4isqlce30.wce5.armv4i.CAB file) in PDA

I could able to run the application in the development environment which is having
Windows XP OS.
Microsoft .NET Compact framework 2.0,
SQL Server 2005 Compact edition

But when I deploy the application in the PDA thro' cab file and try to run the application I am getting the below error at run time.

Could not load type
'System.Data.Sqlserverce.sqlcecommand' from assembly System.Data.Sqlserverce, version=9.0.242.0,culture=neutral,PublickeyToken=8984...'

I have added the SQLCE.dll from the below location

%Program Files%Microsoft SQL Server Compact Editionv3.1System.Data.SqlServerCe.dll

Anybody can suggest me to solve this issue.

Thanks in advance

With Regards,
D.Karthikeyan

View 3 Replies View Related

Install Error System.data.sqlserverce Not In Global Assembly Cache

Nov 2, 2006

I have built a small application in vs2005 (vb) using system.data.slqserverce building

in the mobile sql engine into my app. I intend to run this on desktop. The app

works fine on my development laptop machine, when i publish it (to a hard disk folder) and run it on another laptop, i get:

'unable to install or run the application. The application requires that assembly system.data.sqlserverce version 9.0.242.0 be installed in the Global Assembly Cache (GAC) first.'

This is my first app in .net so not sure what this means.

I thought all i had to do was reference the file (which i have done in the project) and

VS would take care of stuff like this? Framework 2.0 is installed on the target machine.

Hope im in the right forum for this! if not i apologise



Any help most appreciated.



Chris Anderson









View 1 Replies View Related

Error From System.Data.SqlServerCe.SqlCeCommand.ProcessResults() - ** No Exception Message Returned **

May 7, 2008

I have an app running Windows CE 5.0 and SqlServerCE 3.0. Occasionally, one of the production units will throw an exception with the following stack trace but no exception message:

Exception Msg:

Stack Trace: at System.Data.SqlServerCe.SqlCeCommand.ProcessResults()
at System.Data.SqlServerCe.SqlCeCommand.CompileQueryPlan()
at System.Data.SqlServerCe.SqlCeCommand.ExecuteCommand()
at System.Data.SqlServerCe.SqlCeCommand.ExecuteReader()
at System.Data.SqlServerCe.SqlCeCommand.ExecuteReader()
at XX.MobileApp.frmXXX.LoadData()


This is not something that I have been able to reproduce in our shop. I even take their database and run it here in our shop with out such errors. Does anyone know some possible causes for this error?


Sorry, I don't have more info to give becuase this is all I have to work with since I cannot reproduce in our shop. If the exception object exposes a property for the HResult, I would be able to provide that.

I appreciate your repsonses.

View 1 Replies View Related

SqlDataSource.Select Error: Unable To Cast Object Of Type 'System.Data.DataView' To Type 'System.String'.

Oct 19, 2006

I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx    Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!

View 3 Replies View Related

System.Security.SecurityException: Request For The Permission Of Type 'System.Data.SqlClient.SqlClientPermission, System.Data

Aug 21, 2006

I have created a windows library control that accesses a local sql database

I tried the following strings for connecting

Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"

Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"



I am not running the webpage in a virtual directory but in

C:Inetpubwwwrootusercontrol

and I have a simple index.html that tries to read from an sql db but throws

the error

System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.SqlClient.SqlConnection.PermissionDemand()
at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,

etc etc

The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.SqlClient.SqlClientPermission
The Zone of the assembly that failed was:
Trusted


I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security

I think that a windows form connecting to a sql database running in a webpage should be simple

to configure what am I missing?

View 28 Replies View Related

Request For The Permission Of Type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, Pu

Mar 12, 2008


I created a .net console application within which I connect to a sql server (not local) as follows,


string conn_str = "Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=QuantEquitySql;Data Source=server name";

SqlConnection conn = new SqlConnection(conn_str);

conn.Open();
.
Everything works fine when I run it from my computer. When I try to run it from a network share I get the following error,

Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.

I am using Visual Studio 2005 and .Net framwork v2.0.50727.

Does anybody know a fix to this problem?

Thanks

View 3 Replies View Related

'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' Fail

Jun 20, 2007

I have a report that uses some embedded custom code. The embedded custom code is a function that execute some sql query on a sql server database.Everything works fine in Visual studio. The report gets deployed on the server successfully, however when running the report from report manager i get the following error message :



The Hidden expression for the table €˜table1€™ contains an error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.















Here is the code :

************************************************************************

Public function get_field() as string
Dim myConnection As System.Data.SqlClient.SqlConnection
Dim myCommand As System.Data.SqlClient.SqlCommand
Dim data_reader As System.Data.SqlClient.SqlDataReader
Dim field(100) as string
Dim i as integer
Dim j as integer
Dim sql_field as string
Dim nbr_field as integer
Dim rtn_string as string


i = 0
sql_field ="Select field from mytable"
myConnection = New System.Data.SqlClient.SqlConnection("Datasource=xxx.xxx.xxx.xxmydatabase;Initial Catalog=mydatabase;User Id=user1;Password=password1;")
myConnection.Open()
myCommand = New System.Data.SqlClient.SqlCommand(sql_field, myConnection)
data_reader = myCommand.ExecuteReader()
While data_reader.Read()
if data_reader.HasRows then
field(i)= data_reader(0).ToString()
end if
nbr_field = nbr_field + 1
i= i+1
End While
data_reader.Close()
myConnection.Close()


for j = 0 to nbr_field -1
rtn_string = rtn_string + field(j) + ","
Next j

rtn_string = left(rtn_string,rtn_string.length-1)
return rtn_string
'return sql_cmd
'return yes_no
'return lkupfield
end function

******************************************************************

Why do i get the error message ?, is this related to Code Access Security issues with .net framework. if yes

how do i set the Security so the report server or report manager allows embedded custom code to be executed. Any advice ?



Chi








View 7 Replies View Related

A First Chance Exception Of Type 'System.Data.SqlClient.SqlException' Occurred In System.data.dll

Jan 18, 2008

Hi,
I've written this code multiple times now. But for the first time i get an error at the line underlined. My procedure runs perfectly when i execute it through Sql Query analyzer.
plzz help.. Its urgent and am unable to find the reason for this error "A first chance exception of type 'System.Data.SqlClient.SqlException' occurred in system.data.dll"
Thanks !SqlConnection conn = new SqlConnection(DbConnectionString);
conn.Open();
SqlCommand cmd = conn.CreateCommand();
cmd.CommandText = "dbo.rqryTradesPRR";
cmd.Parameters.Add("@COBDate",SqlDbType.DateTime).Value = "2002-10-31 00:00:00.000" ;
SqlDataReader reader = cmd.ExecuteReader();
while(reader.Read())
{
// have written something here

}
 Thanks in advance !
 

View 2 Replies View Related

Sysem.Data.SqlServerCe.SyncStatus' Is Inaccessible Due To Its Protection Level

Jul 28, 2006

I made a merge replication and sucessfully connected with mobile device. Everything works fine. Because I wanna try asynchronous synchronization (which won't stop my application executing when subscribing) I read How to example from MSDN :
http://msdn2.microsoft.com/en-us/library/ms172391.aspx
But there is a problem with creating SyncStatus class object. I can't get into it and I can't create. maybe some reference will help? (I use reference to SQLServerCE). This error stoped my work for now, so I am waiting for some answers.

And if it's simple resolution for this problem - sorry. I just started programming applications for Mobile Devices.

Best regards. Maciek Wysocki

View 3 Replies View Related

Performance SqlServerCE 3.1 Vs. SqlServerCE 3.5

Mar 18, 2008

Hi,

we just migrated to SqlServerMobile 3.5. My first experience is that Version 3.5 is much slower than 3.1.
I upgraded and compacted an existing Database. Is it recommended to create a new database, instead?

Has anybody else the feeling that Version 3.5 is slower?
Are there any settings to speed up the database.

Many thanks,
Stefan

View 2 Replies View Related

Identity In System Tables

Jan 28, 2004

does anyone know how sql 2k stores whether a column is an identity column? is it in any system tables or information_schema?

i've read that i can't find the next value of the identity, which i find weird. I just want to know if the column is an identity or not.

Thanks in advance.

View 5 Replies View Related

Problem In Using Sqlbulkcopy To Insert Data From Datatable(no Identity Column) Into Sql Server Table Having Identity Column

Jun 19, 2008

Hi,
I am having problem in bulk update of a sql server table haning identity column from a datatable( has no identity column) using sqlbulkcopy. I tried several approaches, but it does not show any error nor is the table getting updated. But the identity value seems to getting increased every time.
thanks.
varun

View 6 Replies View Related

System.Data.SqlClient.SqlError: Cannot Open Backup Device '\.Tape0'. Operating System Error 5(error Not Found). (Microsoft.Sql

Nov 25, 2007

System.Data.SqlClient.SqlError: Cannot open backup device '\.Tape0'. Operating system error 5(error not found). (Microsoft.SqlServer.express.Smo)

i have only one sql instance and tape is istalled successfully.
please help me to find solution for this error.

Thanks,

View 2 Replies View Related

Unable To Cast COM Object Of Type 'System.__ComObject' To Class Type 'System.Data.SqlClient.SqlConn

May 17, 2006

Dear all,

I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.

Error:





[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)



Script Code (from Script Component):



' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components

Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper


Public Class ScriptMain
Inherits UserComponent


Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter


Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)

Dim valorColumna As String
Dim valorColumna10 As Double


valorColumna = Row.Column9.Substring(1, 1)

If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If

Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)

With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)

.ExecuteNonQuery()
End With


End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)

Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)

End Sub
Public Overrides Sub PreExecute()

sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)

End Sub


Public Sub New()

End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub

Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class







Thanks a lot for your help


View 13 Replies View Related

@PARAM1 : Unable To Cast Object Of Type 'System.Data.SqlTypes.SqlInt32 To Type System.IConvertable

Apr 23, 2007

I get the following message in the vs2005 querybuilder when i do a preview:



***********************************
SQL Execution Error.

Executed SQL statement: SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = @PARAM1)



Error Source: SQL Server Compact Edition ADO.NET Data Provider


Error Message: @PARAM1 : Unable to cast object of type 'System.Data.SqlTypes.SqlInt32 to type System.IConvertable'.
****************************************

The same querypreview works fine without the parameter:



SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = 186)



Can anybody tell me why this is?
And tell me a way to get the tableadapter working?



Anne-Jan Tuinstra

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved