MS SQL Server :: SELECT Works But UPDATE Fails. ?

DB Update Fails In Program, Works In Management Studio?
I have an SQL statement that, when run through SQL Server management studio works fine. However, when I run it on my ASP page, it doesnâ€™t update the data! I have tried both as a stored procedure and as a simple commandText update statement.
All I do is simly update the value of a column based on another column â€“ nothing particularly complex: update customer set dateChanged = System.DateTime.Now.ToString("dd-MMM-yyyy"), CURRSTAT = 'Active',custType = case WHEN cust_Changing_To IS NOT NULL THEN cust_Changing_To ELSE custType END,cust_Changing_To = NULLFROM customers_v WHERE CURRSTAT = 'Changing'

As you can see, nothing that complex. The line that is causing the problem is the case:
custType = case WHEN cust_Changing_To IS NOT NULL THEN cust_Changing_To ELSE custType END
all it does is if another nullable integer column is not null, sets it to the value of that column, else it retains its existing value.
Like I say, this works in Management studio, but I cannot get it to execute programatticaly from an asp page.
No exceptions are being thrown, it just doesnâ€™t update the data.
Any ideas?
Thanks

View Replies !

SQL 2000 Partitioned View Works Fine, But CURSOR With FOR UPDATE Fails To Declare
This one has me stumped.

I created an updateable partioned view of a very large table. Now I get an error when I attempt to declare a CURSOR that SELECTs from the view, and a FOR UPDATE argument is in the declaration.

There error generated is:

Server: Msg 16957, Level 16, State 4, Line 3

FOR UPDATE cannot be specified on a READ ONLY cursor

Here is the cursor declaration:

declare some_cursor CURSOR

for

select *

from part_view

FOR UPDATE

Any ideas, guys? Thanks in advance for knocking your head against this one.

PS: Since I tested the updateability of the view there are no issues with primary keys, uniqueness, or indexes missing. Also, unfortunately, the dreaded cursor is requried, so set based alternatives are not an option - it's from within Peoplesoft.

View Replies !

DTS Works But Job Fails
Hi

I have a DTS to copy data from Oracle to SQL Server. When I logon to SQL Server box with a userID xxx, I can run the DTS from EM and it works perfectly fine but when I schedule the DTS as job, it fails.

SQL Server agent is running with same account "xxx"
DTS connects to SQL Server with sa authentication
Job owner is same account "xxx"

Job error log

Executed as user: DOMAINNAMExxx. ... Drop table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart: Drop table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnStart: Drop table [IFS_PROD].[dbo].[SUPPLIER_INFO] Step DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: Drop table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnFinish: Drop table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart: Create Table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart: Create Table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnFinish: Drop table [IFS_PROD].[dbo].[SUPPLIER_INFO] Step DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO] Step DTSRun OnStart: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnFinish: Create Table [IFS_PROD].[dbo].[PART_CATALOG] Step DTSRun OnFinish: Create Table [IFS_PROD].[dbo].[INVENTORY_PART] Step DTSRun OnStart... Process Exit Code 6. The step failed.

I copied the DTS to another one and scheduled it

This time I got the error log
Executed as user: DOMAINNAMExxx. ...... DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnFinish: Create Table [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnStart: Copy Data from SUPPLIER_INFO_ADDRESS to [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step DTSRun OnError: Copy Data from SUPPLIER_INFO_ADDRESS to [IFS_PROD].[dbo].[SUPPLIER_INFO_ADDRESS] Step, Error = -2147467259 (80004005) Error string: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed. Error source: Microsoft OLE DB Provider for Oracle Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 0 (. The step failed.

Please help!
Thanks in advance

View Replies !

Sql Job Fails But When Run Outside Works Fine
Hi..

I am stuck at a very awkward place. I have created one package which uses an oracle view as its source for data transfer the problem is when i run the package through dtexec it works fine but when i try to schedule it I get the following error

Error: 2008-03-24 13:52:40.22
   Code: 0xC0202009
   Source: pk_BMR_FEED_oracle Connection manager "Conn_BMR"
   Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.

Provider is unable to function until these components are installed.".

I am able to run the package outside the sql job and also connect to the oracle.
I have oracle 9i client installed on the server and sql server is 2005.

Any help would really be appreciated..

View Replies !

Query Works - Sproc Fails
I have a query that works fine but fails as a sproc.
QUERY:
SELECT UserName, ProfileId, FirstName, LastName
FROM dbo.CustomProfile JOIN dbo.aspnet_Users
ON dbo.CustomProfile.UserId = dbo.aspnet_Users.UserId
WHERE UserName = 'Brown'

SPROC:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[GetProfileId]
@UserName nvarchar
AS
SELECT UserName, ProfileId, FirstName, LastName
FROM dbo.CustomProfile JOIN dbo.aspnet_Users
ON dbo.CustomProfile.UserId = dbo.aspnet_Users.UserId
WHERE UserName = @UserName
The query returns results. In SQL Server Management Studio when I execute the sproc and enter the value Brown the sproc returns no values; i.e. 0

View Replies !

SQL DTS Job Fails Where Execute Of Package Works?
I have a SQL DTS package that imports a text file as one wide column into a two column SQL table, one is an identity seed. So essentially I import then parse the data using the index key as it is 3 seperate lines of data. All works fine by running the DTS package using execute. When I schedule this as a job it fails. It indicates that I have additional white space after a column. Any thoughts on why this can ocurr?

View Replies !

Scheduled DTS Fails, Manual Works. Help!
Hey all. I've got a DTS package that's scheduled to run after business hours on the last day of the month. This package copies some tables from an offsite SQL Server, then runs through a series of SQL Statements and finally exports an excel file with the results.

My problem is that the DTS will run if I manually start it, but the scheduled job always fails. Of course, the error I get is that the job failed at step one, and I have no other info.

I'm not a heavy DBA (mor eon the client app side of things), so I'm unsure as to how I can dbug this. Any help would be greatly appreciated!

View Replies !

DTS Execute Works, Schedule Fails
Hey all,

I have created a DTS task that i can right click on and execute and it works fine on the server.
However when i try to schedule the task and run the job from SQL Server Agent, i get the following error.

Error Source= Microsoft VBScript runtime error Error Description: ActiveX component can't create object: 'CuteFTPPro.TEConnection' Error on Line 31

the error occurs on the following line
Set MySite = CreateObject("CuteFTPPro.TEConnection")

How is it possible that i can execute my package but cannot schedule it? i am executing the package from physically sitting at the server.

thanks in advance,
pete

View Replies !

DB Access Works In Debug But Fails When Hosted
I have written a intranet page that writes some info into a sql database, basically following the 'SQL Server 2005 Express for Beginners' video.When I debug the application from within 'Visual Web Develop 2005 express' it works fine entries are entered into the DB and I can then edit the db using the admin page.But when I host the site using IIS I doesn't work, submissions to the database seem to fail I can see the DB in the admin page but if I try to edit them or delete them it fails. What could I doing wrong could I be missing a setting in IIS? Any ideas??Here's my webconfig if that helps at all: <?xml version="1.0"?><configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0"> <connectionStrings> <add name="studentprofilesConnectionString1" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|studentprofiles.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/> </connectionStrings> <system.web> <roleManager defaultProvider="AspNetWindowsTokenRoleProvider" /> <compilation debug="true" defaultLanguage="c#" /></system.web></configuration>

View Replies !

Using A Date Filter In Query With (&< Or &>) Fails But With (=) Works ???
I have a simple ASP.NET application that allows the user to enter a Query in a TextArea and submit that to the database. Queries that contain Integer, String or other filters seem to work fine, but when the Query contains a Date or DateTime I have problems.
Here is an example that works fine in Query analyzer but fails when executed in ASP.NET.
"select top 10 * from Subscribers where StartDate < '09-03-2002'"
In Query Analyzer no problem, in ASP.NET I get this error...
Line 1: Incorrect syntax near ';'
However if the Query uses '=' instead of a '<' or '' then it works without error
"select top 10 * from Subscribers where StartDate ='09-03-2002'"
Any help would be appreciated

View Replies !

Problem: Replication Fails Over Modem But Works On LAN
Hi,I am having a problem with a replication over a Modem-Connection,which works fine over LAN. Has anyone experienced this problem before?Settings are:2 SQL Servers 2000, SP3on Windows 2000Publischer Database ist about 3GB, Subscriber DB about 1,5GBPublisher and Subscriber are connected via 56Kbit Dial-Up--> The Replication worked fine now this way for about 6 Months now!overall the publisher has about 20 Subscribers all connected viadial-up and they all work fine.Behavior now is like this:- Dial Up works fine- Synch starts- Synch takes some time (Upload works fine)- Synch fails- Error Message(german):Der Prozess konnte die Zeilenmetadaten auf 'Subscriber' nichtabfragen.{call sp_MSgetmetadatabatch(?,?,?)}Allgemeiner Netzwerkfehler. Weitere Informationen finden Sie in derDokumentation über Netzwerke.Der Prozess wurde erfolgreich beendet.If I connect the Subscriber-Server directly to the publisher servervia LAN it all works fine.My thesis is, that there might be some kind of "timeout" or something,as it cant be the dial-up network, because we tried different modemsand different server locations. And it all works fine on most of theother connedted subscribers. Only 2 other very big subscribersexperience the same problem, therefore i assume it could havesomething to to with slow connection speed, timeouts and an inabilityof the SQL server to handle this.Anyone seen this before? Anyone can help me?Thanks and Best Regards,Gerd

View Replies !

DTS Import Works Directly, Fails When Scheduled
I'm new to DTS packages, but managed to create one that successfully empties a table in SQL Server then imports data from a Foxpro file on another server into it. It runs fine if I execute it from DTS, but fails if I schedule it to run in SQL Server Agent (using the "Schedule Package" option in DTS). I think the relevant portion of the error returned when the job fails is:

Error string: [Microsoft][ODBC Visual FoxPro Driver]File 'hrpersnl.dbf' does not exist.

The file does exist. I also tried to execute it from a stored procedure, but got a similar error. Any thoughts on why it runs one way but not the other?

TIA

View Replies !

WebRequest Over HTTPS Fails Under SQLCLR, But Works Elsewhere
I have some code in a SQL CLR stored procedure that calls out to a web service at UPS to obtain tracking information for a package.

The code fails on the last line, in the call to WebRequest.GetRequestStream(), with the following exception:

"System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetRequestStream()
   at UPSTracking.TrackShipment(String TrackingUri)"

Here is the relevant code:

WebProxy proxyObject = new WebProxy();
WebRequest request = WebRequest.Create("https://www.ups.com/ups.app/xml/Track");
request.Proxy = proxyObject;
request.Method = "POST";
request.ContentLength = strXMLData.Length;
request.ContentType = "application/x-www-form-urlencoded";
StreamWriter sw = new StreamWriter(request.GetRequestStream());

This same code works just fine when not running in the SQL CLR assembly. The assembly is marked as External, but I've also tried marking it as Unsafe, which did not work either.

Any suggestions on what the problem might be or how to troubleshoot this further would be greatly appreciated.

Thanks,

Steve F.

View Replies !

32 Bit DTExec Fails While 64 Bit Works Fine On 64 Bit Machine
Hi,
I am executing a SSIS package using dtexec. 64 bit version of dtexec works fine. But when i use 32 bit version of dtexec, it fails. i have local admin rights. Following is error description. Please help.

Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.

Started: 9:24:30 AM
Error: 2008-03-18 09:24:32.54
   Code: 0xC0202009
   Source: IMALCRM Connection manager "IMAL SRC"
   Description: An OLE DB error has occurred. Error code: 0x800703E6.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" H
result: 0x800703E6 Description: "Invalid access to memory location.".
End Error
Error: 2008-03-18 09:24:32.54
   Code: 0xC020801C
   Source: Load Fund Detail V_FUND_DETAIL [16]
   Description: The AcquireConnection method call to the connection manager "IMA
L SRC" failed with error code 0xC0202009.
End Error
Error: 2008-03-18 09:24:32.54
   Code: 0xC0047017
   Source: Load Fund Detail DTS.Pipeline
   Description: component "V_FUND_DETAIL" (16) failed validation and returned er
ror code 0xC020801C.
End Error
Error: 2008-03-18 09:24:32.54
   Code: 0xC004700C
   Source: Load Fund Detail DTS.Pipeline
   Description: One or more component failed validation.
End Error
Error: 2008-03-18 09:24:32.54
   Code: 0xC0024107
   Source: Load Fund Detail
   Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 9:24:30 AM
Finished: 9:24:32 AM
Elapsed: 2.078 seconds

View Replies !

HTTP Connection From Iis Fails But Works From Excel
Hi,

I can use Http connection to Analysis Services 2005 from Excel but when I try to use IIS it fails.
AS and IIS are on different machines and not in the same domain.

In the event log of the server with AS i can see following event:

Event Type: Information
Event Source: MSOLAP ISAPI Extension: \?C:Inetpubwwwrootolapmsmdpump.dll
Event Category: (269)
Event ID: 10
Date:  5/20/2008
Time:  10:17:02 AM
User:  N/A
Computer: *******
Description:
The description for Event ID ( 10 ) in Source ( MSOLAP ISAPI Extension: \?C:Inetpubwwwrootolapmsmdpump.dll ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: .

I assume it's permission issue. Excel and IIS must be using different user to connect to AS. I tried with different authentication methods on the iis but without success.

How can I make IIS connect with proper permissions?

Dariusz

View Replies !

Login Fails For FQDN But Works For IP Address
When attempting to connect to Reporting Services (SQL2005) with FQDN, the logon prompt fails after 3 attempts:
http://sqlReportServer.mydomain.net/ReportsManager/Pages/Folder.aspx

If use the IP, it prompts for credentials and works:
http://192.168.0.23/ReportsManager/Pages/Folder.aspx

I have checked the SQL instance name and seems good. RDP by FQDN works fine, etc. Any hints?
CW
--

View Replies !

Login Fails For Network SQL Server But Works For Localhost
I have an ASP.NET webform:This connection works: "Server=localhost;uid=sa;pwd=;database=pubs"but this connection DOES NOT work: "Server=dnrsqlt1;uid=sa;pwd=;database=pubs"dnrsqlt1 is a sql server my network.Do I have to do something to users ASPNET or IUSER_Machinename on the remote machine

View Replies !

Procs Fails In MS Access, Works In Management Studio
I have a stored procedure which is run through MS Access (yuck). It does not appear to fail, but it does not populate certain tables, and is also rather complex. I did not write it, and am trying my best to fix it. However, when I run the same procedure with the same parameters from within Management Studio (database state is the same, I restore from backup before trying out each execution) it populates the tables correctly. I have profiled both executions (from MS and from Access) and it is running with the same NTUsername, and thus the same permissions. The process used to work and then some changes were made to the DB which seem to have broken it from Access. As far as I know, the Access code has not changed, although it may have done so. The proc call from Access uses the same parameters, and does not throw an error, although it does not appear to close the connection to the DB (I'm looking into this). Access uses an ODBC connection to connect to SQL Server.

Any ideas?

View Replies !

Report Works Fine Stand Alone, But Fails When Used As Subreport
I have a report which I have tested and works fine. now I'm trying to use it as a subreport. the "outer" or main report is very simple: it just has a company standard banner and some header/footer information, and then a single subreport. there is no passing of parameters between main report and sub report. the subreport does have its own parameter to govern its dataset, and provides its own default for that.

The error that I'm getting is this:

[rsErrorExecutingSubreport] An error occurred while executing the subreport €˜subreport1€™: An error has occurred during report processing.

[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. This field is missing from the returned result set from the data source.

[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Year€™. The data extension returned an error during reading the field.

[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. This field is missing from the returned result set from the data source.

[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Month€™. The data extension returned an error during reading the field.

[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. This field is missing from the returned result set from the data source.

[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Date€™. The data extension returned an error during reading the field.

[rsMissingFieldInDataSet] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. This field is missing from the returned result set from the data source.

[rsErrorReadingDataSetField] The data set €˜WarrantMasterCube€™ contains a definition for the Field €˜Wt_TO_MTD€™. The data extension returned an error during reading the field.

[rsNone] An error has occurred during report processing.

Of course, this doesn't happen when I execute the subreport by itself. What kinds of things should I be looking at to get to the bottom of this. Thanks!

View Replies !

SQL Server Agent And X64 Using OraOLEDB.Oracle.1: Dtexec From Cmd Works, But Job Fails
I am extracting data from an Oracle database and have installed the latest x64 ODAC. When I run the 64 bit dtexec in cmd the package runs fine with no errors, but when creating and executing a SSIS job in the agent it fails. I've tried creating the job using CmdExec as well and I get the same errors:

Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 64-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 11:12:43 AM
Error: 2007-08-15 11:12:45.63
   Code: 0xC0202009
   Source: Load Dimension Data Connection manager "ora"
   Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x800703E6.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x800703E6 Description: "Invalid access to memory location.".
End Error
Error: 2007-08-15 11:12:45.65
   Code: 0xC020801C
   Source: CopyCustomers CustomerSource [1]
   Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "ora" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
End Error
Error: 2007-08-15 11:12:45.65

The CmdExec job step uses the _exact_ same command as the one I execute successfully in cmd:
"c:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /FILE "C:PackagesLoad Dimension Data.dtsx" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW

I have managed to find two work arounds, but they are quite ugly:

1) Schedule the package execution using Windows Task Scheduler, basically create a bat file which runs the package.
2) Schedule the package in SQL Server agent, but as T-SQL script and use xp_cmdshell, i.e. EXEC xp_cmdshell 'dtexec /FILE "C:PackagesLoad Dimension Data.dtsx" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW'

Both work and use the 64 bit dtexec. Not that elegant though..

CmdExec and the 32 bit version of dtexec works, but is not good enough for me since we bought new hardware and 64 bit software just to be able to address more memory. Has anyone managed to execute a SSIS package successfully using the agent and the 64 bit OraOLEDB.Oracle.1?

Any help would be greatly appreciated. Thanks!

Btw, I am using Windows Server 2003 x64 and SQL Server with SP2.

View Replies !

Query That Works In Management Studio, Fails In Reporting Services
I can run the following query in Management Studio, but get the error listed below when I run it from the data tab in Reporting Services:

declare @starttime as datetime
declare @endtime as datetime
declare @timezone as integer
declare @date as datetime

set @timezone = 1
set @date = '5/1/2007'

set @starttime = dateadd(hh, @timezone, @date)
set @endtime = dateadd(d, 1, @starttime)

select @Starttime, @endtime from site

Error Message:

TITLE: Microsoft Report Designer
------------------------------

An error occurred while executing the query.
The variable name '@starttime' has already been declared. Variable names must be unique within a query batch or stored procedure.

------------------------------
ADDITIONAL INFORMATION:

The variable name '@starttime' has already been declared. Variable names must be unique within a query batch or stored procedure. (Microsoft SQL Server, Error: 134)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.2039&EvtSrc=MSSQLServer&EvtID=134&LinkId=20476

------------------------------
BUTTONS:

OK
------------------------------

What I am trying to accomplish is the ability for users to select which time zone they want the data in the report to display in. To do this, I created a timezone parameter that has the offset from Central Time (which is how all data is stored in our database).

Any help would be greatly appreciated!

View Replies !

Instead Of Trigger - Works In Mgment Console But Fails In Live Test
Hi, I wasn't sure if this was the correct place for this question since it involves both T-SQL and ODBC but i thought I would start here. A little system information to start. I'm using SQL 2005 on a Windows 2003 server. An application is connection to my database through ODBC and adds records to a table one at a time (no batches).

I have an Instead of Trigger created on a table that tests for the existence of a valid foriegn key. If the key doesn't exist in the related table I want to insert the record into a "bad records" table.

My trigger works perfectly when I add a bogus record to the table directly in the SQL Management Console table view or thorugh an insert query. However, when I try a live test with an application connected via ODBC that is adding records to the table the trigger fails to catch the errors and will not update the "bad records" table. If a record is legitmate (i.e. has a valid foreign key) then the final bit of trigger code fires without a problem.

Does anyone know of a problem with Instead Of Triggers working on multiple tables when connection through ODBC? It just seems weird that the trigger works perfectly in one situation but then doesn't work in another.

Thanks and advance for any help you can give.

-Will

View Replies !

DTS Works, Job Fails!(data Source Foxpro And Destination SQL Server 2000
The DTS works perfectly when I run it manually. However, when I run itas a job it fails. Before you ask if i'm running it under differentsecurity context. I have already made sure of that. I was logged intothe server through remote viewer, when I created and ran the package,as well as scheduling the job. So the accounts they're running underare consistent. They're the same accounts as the SQL Agent is runningunder and it's the sys admin account.The data source is a Fox pro database with a pull of two tables. I amusing Microsoft OLE DB Foxpro driver as my source connection and OLE DBConnection for SQL Server as my destination. I am doing a simple tableto table transformation. The path of my connection is a mapped Drive:E:Main. There are other packages and jobs within my job queue that arepointing to the same database and they seem to run fine using the abovemapped drive. The ONLY difference between this package and otherpackages are that, they're few months old and this one was created lastnight. I have also enabled logging on this package and here is thebelow error when the job fails:Package Steps execution information:Step 'DTSStep_DTSDataPumpTask_1' failedStep Error Source: Microsoft OLE DB Provider for Visual FoxProStep Error Description:Invalid path or file name.Step Error code: 80040E21Step Error Help File:Step Error Help Context ID:0Step Execution Started: 9/23/2006 11:39:17 AMStep Execution Completed: 9/23/2006 11:39:17 AMTotal Step Execution Time: 0.031 secondsProgress count in Step: 0

View Replies !

Works Fine Inside BI Dev. Studio, But Fails When Scheduling It In SQL Server 2005.
Hi!

View Replies !

Access Denied To ReportServer And Reports, Works Locally But Fails Remotely

I am getting the error:

HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials.
Internet Information Services (IIS)

when I attempt to connect to Reports or ReportServer from my desktop, but it works normally when I login with the same userid and run it directly on the server, using IE. It is prompting me for a login 2 or 3 times before failing.

My configuration is:

Report Server system:

Windows Server 2003 R2 SP2 - 32bit

SQL Server 2005 Reporting Services Enterprise Edition
Windows & Web Service run as a domain account
Database connection is using domain account - not in db_owner, but in RSExec roles
Database is on another server, and is Native, not SharePoint integrated
Reports & ReportServer are in a separate application pool
Reporting Services had SP2 installed before it was configured
The Rport Server is a VM

Database server

Windows Server 2003 R2 SP2 - x64
SQL Server 2005 Enterprise Edition 64bit
Version 9.00.3200.00

The Report Manager was not working at all, and I discovered that there was no entry in the .Net Framework version on the APS.Net tab in properties for the Reports virtual directory. I am not seeing any errors or anything unusual in the Event log or in the ReportServer log files.

FrontPage 2002 extensions were installed, and then removed. I noticed that this installed a SharePoint virtual directory, and that disappeared when I removed FrontPage extensions.

The domain group my userid is in is in the local Administrators group on the ReportServer system, and I have added this group as a System Administrator and Content Manager through the report Manager.

I would greatly appreciate any suggestions.

Thanks,
Bill

View Replies !

Update Statement Works Ok But No Result
here is my update statement in a stored procedure:

create proc proc_add_comp
    @comp_answer nvarchar(300),
    @admin nvarchar(100),
    @comp_id int
as

update tbComp set

comp_answer = comp_answer + ' - ' + @admin + ', ' + @comp_answer

where comp_id=@comp_id

then I try it like this :
exec proc_add_comp 'new answer','by me',1

result is : (1 row(s) affected)

but when I look in the db, nothing was changed, comp_answer still has its old value..
comp_answer is nvarchar type column..isnt add operation allowed in update statement?
thanks...

View Replies !

Dateadd Update Works But Adds 2 Or 3 Yrs-not 1
I have a page that is supposed to add a year to a record when it loads. The problem is that it adds 2 or three years instead.
Here is the page_load event:Sub page_load(sender as object, e as eventargs)
Try
Dim connection As SqlConnection = new SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
Dim command As SqlCommand = new SqlCommand("Updateexpiredate", connection)
command.CommandType = CommandType.StoredProcedure

Dim param0 As SqlParameter = new SqlParameter("@memberid",SqlDbType.Int)
param0.Direction = ParameterDirection.Input
param0.Value = memberid
command.Parameters.Add(param0)

connection.Open()
command.ExecuteNonQuery()
connection.Close()
myerror.Text = "Thank You! Your account was updated"
Catch ex As Exception
myerror.Text = ex.Message
End Try
End SubAnd here is the SPROC:CREATE PROCEDURE Updateexpiredate
(
@memberid int
)
AS
UPDATE
members
SET
expiredate=(dateadd(year,1,expiredate)) <--I also tried expiredate=(dateadd(month,12,expiredate)) with the same results
WHERE
memberID = @memberID
GO

View Replies !

How SELECT In WHERE Clause Works?
Please help
I'm trying to do a select command but doesn't return any record
I have two tables one is "lists" another one is "list_records"
in the liss table I have 4 records and in the list_records I have only one record which is tell who is already visited the site so I created a query to get people who is NOT visited the site

Here is my query (I got 0 record return)

SELECT *FROM lists
list_reccords
WHERE NOT EXISTS (SELECT *
                                                  FROM lists,
                                                    list_records                                       WHERE list_records.is_visited = 1
                                             AND lists.list_id = list_records.list_id)

View Replies !

Select Query Works On V2 And Not On V1.2
Hi

The query below with table join works on my dev server sql server MC
v2, but returns only NULL values for Questiona and Module on the live
server MC v1.2, is this error to do with the version or something else
like relationships?

SELECT
Induction_Module.Induction_Module, Induction_Questions.Question,
Induction_AnswerIncorrectStats.AnswerIncorrectNo,

Induction_Questions.AnswerCorrect,
CAST(Induction_AnswerIncorrectStats.DateAnswered AS VarChar(11)) AS
DateAnswered
FROM         Induction_Questions LEFT OUTER JOIN

Induction_Module ON Induction_Questions.InductionModuleID =
Induction_Module.Induction_ModuleID RIGHT OUTER JOIN

Induction_AnswerIncorrectStats ON Induction_Questions.QuestionID =
Induction_AnswerIncorrectStats.QuestionID

Regards

Steve

View Replies !

Complex SQL Select Statement That Works But...
I have a pretty complex SQL statement that looks like this:
SELECT aspnet_Employers.active, aspnet_Employers.accountexecutiveusername, aspnet_Employers.created, aspnet_Employers.Title AS Contact, SUM(aspnet_Employers.EmployeeCount) AS [# Emps], COUNT(aspnet_Signups.account) AS [# Email Addresses], COUNT(aspnet_ContactMe.username) AS [# Contact Me], COUNT(aspnet_AppsSubmitted.account) AS [# Apply Now]FROM aspnet_Employers LEFT OUTER JOIN aspnet_AppsSubmitted ON aspnet_Employers.UserName = aspnet_AppsSubmitted.account LEFT OUTER JOIN aspnet_ContactMe ON aspnet_Employers.UserName = aspnet_ContactMe.username LEFT OUTER JOIN aspnet_Signups ON aspnet_Employers.UserName = aspnet_Signups.accountGROUP BY aspnet_Employers.accountexecutiveusername, aspnet_Employers.created, aspnet_Employers.Title, aspnet_Employers.active
It does work the way i want it, but the problem is, on my Gridview when i change the Employers accounts "Active" status either way, it changes the username field from the username of the account, to "null".
Why does it do this?
What would i change to prevent this from happening?

Thanks!

View Replies !

Select Into Works, Create Table Does Not
HiWe are migrating from Access to SQL server. The code is in VB and usesDAO3.6. I have successfully made the connection to the databases onthe SQL server and done operations with recordsets. I have also used aSELECT INTO command to create new tables. However CREATE TABLE andALTER TABLE commands do not work.Any ideas?The DBA says we have owner privileges on the databases and thereforeshould be able to do what we like.Many thanksSi

View Replies !

How This Select Statment Works Please It Is Urgent?
hey friends!
pleaze help, i am using sql server 2000.i have tried to fix my problem for more than five weeks just to solve for one problem and just still now it is unsolved, opps my due date is almost approaching, i don't know what to do more than what i did, i have search through the net, but still i did not get the correct answer to my problem, friends please just forward your answer to me, it may be best answer to my question .
create table mytable( english varchar(120), tigrigna Nvarchar(120))
insert into mytable values('peace',N'sälam')
insert into mytable values('kiss',N'samä ')
insert into mytable values('to kiss each other',N'täsasamä ')
then
select * from mytable where english='peace'; this works fine
but
select * from mytable where tigrigna=N'sälam'; this doesnot work;
select * from mytable where tigrigna='sälam'; this also doesnot work,
so what should i do to select this unicode select statement?

tigrigna is one of the spoken language in east africa(ethiopia).
Hopefully, i have joined this forum today, and just looking for your reply

I am Looking for your reply !

View Replies !

How To Select A Random Record (REALLY WORKS!)
CREATE PROCEDURE p_randomrecord AS
Declare @selectedrow int

while @selectedrow is null
begin
select @selectedrow = id from table
where id = ceiling(rand() * (select max(id) from table))
END

select * from table where id=@selectedrow

View Replies !

Insert Works, But Delete And Update Don't In A DetailsView Control
I have 2 Gridviews and a DetailsView for each GridView. The first Gridview and DetailsView work fine and I can Insert, Delete and Update the DetailsView just fine. However the second Gridview/DetailsView will only let me Insert but not Delete or Update. When I click on the "Delete" button it just ignores me. If I do an "Edit", when I try to click on the "Update" button it is ignored again and I have to click on "Cancel". I don't get any error messages...

Anyone have an idea what might be wrong?

View Replies !

Primary Key In Datarow After Update Works In Access Not In Sql Server
Heys

a while back i had to do a project with an access database, one of the biggest problems i had back then was gettting the primary key
of a datarow you had just inserted into the database.

After a long set of trial and error i came up with the following:

- add the tablemappings of a table
- call the dataadapte.fillschema method

then after inserting a new row into the database the primary key gets filled in automatically!

now thing is

i was hoping to duplicate this in sql server

but it doesn't seem to work at all

so after i insert a row into my datatable
and update it
the row is in the database
but in vb the datarow primary key is not filled in!
anyone have an idea?

prefereabely one that does not resort to stored procedures with return parameters etc

thx a million in advance!

View Replies !

Update Table From MS2005 To Oracle 9.2 - No Solution Works For Me
Hi,

I have been fighting this problem for several days now.

All I need to do is run a query against a table on mssql 2005 server and update a table (only update) in Oracle

Here are some of the things I have tried:

1) from a forum tip, I set up a dataflow: OLE DB Source (MS SQL) -> Derived Column -> OLE DB Command (Oracle)

- I get "Error at Data Flow Task [OLE DB Command [2850]]: Columns "NyNamn" and "id" cannot convert between unicode and non-unicode string data types."

2) I have tried a Source - OLE DB Source (MS SQL) -> Derived Column -> OLEDB Desination (Oracles OLEDB)

- Error when trying to preview:
TITLE: Microsoft Visual Studio
------------------------------
Error at Data Flow Task [OLE DB Destination [2953]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
Error at Data Flow Task [OLE DB Destination [2953]]: Opening a rowset for ""APPINV2"."OWNERS"" failed. Check that the object exists in the database.

------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)

3) I have tried a Source - OLE DB Source (MS SQL) -> Derived Column -> OLEDB Desination (MicrosoftsOLEDB for Oracle)

- Error when trying to preview:
TITLE: Microsoft Visual Studio
------------------------------
Error at Data Flow Task [OLE DB Destination [2953]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Unspecified error".
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Data type is not supported.".
Error at Data Flow Task [OLE DB Destination [2953]]: Opening a rowset for ""APPINV2"."OWNERS"" failed. Check that the object exists in the database.

------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)

I have full rights on the oracle database with the account used, i can connect with toad with no problems.

To me, this should be a simple task. has anyone got any advice for me ?

Thanks

View Replies !

Select Statement Works In 2000 But Not In 2005
I hope this is a easy one. We are trying to find a fix for a select statement that works in 2000 but not in 2005 with a simple select statement.

The easiest statement that will duplicate the error is:

TestTable has 3 columns: Primary, strTest, strTest2

SELECT strTest, strTest AS Name
FROM TestTable
ORDER BY strTest2

If you sort by the Primary column you will not receive an error.

How can you select the same column twice and then sort in the SQL statement?

View Replies !

DTS Fails At Customer Site With &"Too Many Columns&", Works Locally
I am having the most baffling problem with DTS.... :confused:

I have a set of ActiveX transforms that execute on my customers flat transaction data files, destination a single database table. Since they switched to a new method of generating the flat file using SAS, the DTS package mysteriously will fail at a couple select records. The error is always the same, and turning on error logging in DTS yielded this:

Step 'DTSStep_DTSDataPumpTask_1' failed

Step Error Source: Microsoft Data Transformation Services Flat File Rowset Provider
Step Error Description:Too many columns found in the current row; non-whitespace characters were found after the last defined column's data.
Step Error code: 80043013
Step Error Help File: DTSFFile.hlp
Step Error Help Context ID:0

Step Execution Started: 11/16/2004 6:37:51 PM
Step Execution Completed: 11/16/2004 6:39:39 PM
Total Step Execution Time: 107.415 seconds
Progress count in Step: 515000

The exact same file parses all the way through on my laptop, with the same DTS package. Tests have revealed no strange characters or whitespaces in the data file, not at that record (running a Test... on any of the active x transforms will fail at row 515186 always, until that row is deleted and it fails on some subsequent row - this iteration went on at the customer site until about 5 rows were deleted this month and it finally worked), not at any other records. My database and the customer database are both using the same, default character set.

The only microsoft KB article referencing anything resembling my problem is
http://support.microsoft.com/default.aspx?scid=kb;en-us;292588
but this does not hold because I am not specifying fixed width, but rather comma delimited.

If anyone has any ideas about what other environmental variables are coming into play here, please let me know - I'm at the end of my rope. I believe we are both patched up to SQL 2000 SP3. They have an XP client connecting to a 2003 server; I have an XP client/server. Neither machine has the NLS_LANG environment variable set.

View Replies !

Help:SQLExpress User Instance Fails For Normal User; Works For Administrator
I'm using the RTM version of Visual Studion 2008 and SQLServer Express.

Logged in as an administrator, I can create a connection to an mdf file and all is well.

As a normal user, attempting to create a connection gives the message "sqlservr.exe has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."

I have tried this with UAC turned on and turned off. The result is the same. In Services I can see that SQLEXPRESS is running, but each time I try to connect, I get the "stopped working" message.

For existing database programs that have the .mdf file stored in the project folder, I can run the program in the VS IDE on my XP machine and on my Vista machine as administrator, but not as a normal user.

I'm not looking for a workaround to make this work once, but the cause and solution to the problem. This is for an introductory VB textbook and we must be able to move a database program from one machine to another and make it work. Everything I have read says that SQLExpress should be able to do that.

Can anyone help me with this?

Judy Fraser

View Replies !

Havin Trouble Inserting Records To A Table.. Update Works Fine
Hi..
I am getting a xml stream of data and putting it to a object and then calling a big sproc to insert or update data in many tables across my database... But there is one Table that i am having trouble inserting it.. But if i run an update it works fine... This my code for that part of the sproc..
IF Exists(
SELECT
*
FROM
PlanEligibility
WHERE
PlanId = @PlanId
) BEGIN
UPDATE
PlanEligibility
SET
LengthOfService = Case When @PD_EmployeeContribution = 0 Then @rsLengthOfServicePS
ELSE @rsLengthOfService END,
EligibilityAge = CASE When @PD_EmployeeContribution = 0 Then @EligibilityAgePS Else @EligibilityAge End,
EntryDates = @EntryDates,
EligiDifferentRequirementsMatch = Case When @PD_EmployeeContribution = 0 Then 0
When @PD_EmployeeContribution = 1 and @PD_EmployerContribution = 0 then 0 Else 1 END, --@CompMatchM,
LengthOfServiceMatch = CASE When @MCompanyMatch = 0 Then @rsLengthOfServicePs ELSE @rsLengthOfServiceMatch END,
EligibilityAgeMatch = CASE When @MCompanyMatch = 0 Then @EligibilityAgePS ELSE @EligibilityAgeMatch END,
OtherEmployeeExclusions = @OtherEmployeeExclusions
WHERE
PlanId = @PlanId
END
ELSE BEGIN
INSERT INTO PlanEligibility
(
PlanId,
LengthOfService,
EligibilityAge,
EntryDates,
EligiDifferentRequirementsMatch,
LengthOfServiceMatch,
EligibilityAgeMatch,
OtherEmployeeExclusions
)
VALUES
(
@PlanId,
Case When @PD_EmployeeContribution = 0 Then @rsLengthOfServicePS
ELSE @rsLengthOfService END,--@rsLengthOfService,
CASE When @PD_EmployeeContribution = 0 Then @EligibilityAgePS Else @EligibilityAge End, --@EligibilityAge,
@EntryDates,
Case When @PD_EmployeeContribution = 0 Then 0
When @PD_EmployeeContribution = 1 and @PD_EmployerContribution = 0 then 0 Else 1 END, --having trouble here
CASE When @MCompanyMatch = 0 Then @rsLengthOfServicePs ELSE @rsLengthOfServiceMatch END,
CASE When @MCompanyMatch = 0 Then @EligibilityAgePS ELSE @EligibilityAgeMatch END, --EligibilityAgeMatch,@EligibilityAgeMatch,
@OtherEmployeeExclusions
)
END
Any help will be appreciated..
Regards,
Karen

View Replies !

Help: Why IN-Operator With Select-Statement It Doesn't Work? But With Given Values It Works
Hello to all,
i have a problem with IN-Operator. I cann't resolve it. I hope that somebody can help me.
I have a IN_Operator sql query like this, this sql query can work. it means that i can get a result 3418:
declare @IDM int;
declare @IDO varchar(8000);
set @IDM = 3418;
set @IDO = '3430'
select *
from wtcomValidRelationships as A
where (A.IDMember = @IDM) and ( @IDO in (3428 , 3430 , 3436 , 3452 , 3460 , 3472 , 3437 , 3422 , 3468 , 3470 , 3451 , 3623 , 3475 , 3595 , 3709 , 3723 , 3594 , 3864 , 3453 , 4080 ))
but these numbers (3428 , 3430 , 3436 , 3452 , 3460 , 3472 , 3437 , 3422 , 3468 , 3470 , 3451 , 3623 , 3475 , 3595 , 3709 , 3723 , 3594 , 3864 , 3453 , 4080 ) come from a select-statement. so if i use select-statement in this query, i get nothing back. this query like this one:select *
from wtcomValidRelationships as A
where (A.IDMember = @IDM) and ( @IDO in (select B.RelationshipIDs from wtcomValidRelationships as B where B.IDMember = @IDM))
I have checked that man can use IN-Operator with select-statement. I don't know why it doesn't work with me. Could somebody help me? Thanks
I use MS SQL 2005 Server Management Stadio Express
Thanks a million and Best regards
Sha

View Replies !

Select Records Between Dates - Query Works In VS 2005 But It Doesn't In Asp 3
Hello. I'm having troubles with a query that (should) return all therecords between two dates. The date field is a datetime type. The db isSQL Server 2000. When I try thisSELECT RESERVES.RES_ID, PAYMENTS_RECEIVED.PYR_ID,PAYMENTS_RECEIVED.PYR_VALUE, PAYMENTS_RECEIVED.PYR_DATE,CUSTOMERS.CUS_NAMEFROM RESERVES LEFT OUTER JOINPAYMENTS_RECEIVED ON RESERVES.RES_ID =PAYMENTS_RECEIVED.RES_ID LEFT OUTER JOINCUSTOMERS ON RESERVES.CUS_ID = CUSTOMERS.CUS_IDWHERE (PAYMENTS_RECEIVED.PYR_DATE >= '2006-03-20 00:00:00') AND(PAYMENTS_RECEIVED.PYR_DATE < '2006-03-27 00:00:00')on a "query builder" in visual studio, I get the results that I want.But when I use exactly the same query on an asp 3 vbscript script, Iget no results (an empty selection).I've done everything imaginable. I wrote the date as iso, ansi, britishformat using convert(,103) (that's how users will enter the dates),i've used cast('20060327' as datetime), etc. But I can't still get itto work. Other querys from the asp pages work ok. Any ideas?thanks a lot in advance

View Replies !

SELECT Statement Works In SQL Server Management Studio But Not In SSRS

Hi,

I'm attempting to extract some yearly average figures from our DB. I've written a SELECT statement in SQL Server MS which returns exactly what I need:

SELECT YEAR, CAllSource, AVG(CallTotal) AS [Average calls per day]

FROM (SELECT COUNT(CallID) AS CallTotal, DATEPART(YEAR, Recvddate) AS Year, CASE WHEN CallSource IN ('Auto Ticket', 'Email')

THEN 'Email' WHEN CallSource IN ('Phone') THEN 'Phone' ELSE 'Other' END AS CallSource

FROM Calllog where

DATEPART(MONTH, Recvddate) = 3

AND DATEPART(dw, RecvdDate) NOT IN ('7', '1')

GROUP BY RecvdDATE, callsource) as sub

GROUP BY YEAR, CallSource

ORDER BY YEAR, CallSource

The problem is that when I attempt to use this in SSRS I get the following error:

"sub.Year is not a recognised DATEPART Option".

Now as you can see, "sub.Year" is not even mentioned in the expression. However I noticed that when running the query, SSRS automatically adds "sub." before the YEAR in the section highlighted in yellow above. a) Why is it doing this, and b) does anyone know of a workaround/fix?

Thanks
Matt

View Replies !

Logging To Event Viewer &&"fails&&" But SQL Server Logging Works OK - Why?
Greetings,

I am developing a package on my local workstation. I have defined two logging service providers. One is for SQL Server and the other is for the Windows Event Log. I am using the Dts.Log method in a script task to write log entries.

Logging is working properly with the SQL Server provider and rows are being inserted into the sysdtslog90 table. However, the only events that are being logged in the Windows Event Log are the package start and end events which I believe SSIS is doing automatically anyway.

Is there something I need to do to enable WIndows Event Log logging other than defining a log provider and making sure it is checked active? Won't SSIS write to two different logs with one Dts.Log call? Any ideas on what might be going wrong with my approach?

Thanks,

BCB

View Replies !

SQL Update Command Fails

I have the code as fallows to update my SQL data ;Sub Kaydet(ByVal TickerKod As String, ByVal op1 As Double, ByVal op2 As Double, ByVal op3 As Double, ByVal op4 As Double, ByVal op5 As Double, ByVal op6 As Double, ByVal op7 As Double, ByVal mov1 As Double, ByVal mov2 As Double)
'Dim nop1 As Decimal = FormatNumber(Replace(op1, ",", "."), 2)Dim mysource As New SqlDataSource
mysource.ConnectionString = ("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Stock.mdf;Integrated Security=True;User Instance=True")mysource.UpdateCommand = ("UPDATE StockParametre SET OPT1 = " & FormatNumber(op1, 2) & ", OPT2 = " & FormatNumber(op2, 2) & ", OPT3 = " & FormatNumber(op3, 2) & ", OPT4 = " & FormatNumber(op4, 2) & ", OPT5 = " & FormatNumber(op5, 2) & ", OPT6 = " & FormatNumber(op6, 2) & ", OPT7 = " & FormatNumber(op7, 2) & ", MOVY = " & FormatNumber(mov1, 2) & ", MOVD = " & FormatNumber(mov2, 2) & " WHERE (Stock = '" & TickerKod & "')")
mysource.Update()Response.Write(mysource.UpdateCommand & "<br>")
End Sub
When I call this code inside of Virtual Web Developer it functions perfect and updates the data..There is no problerm
But when I call it like http:// .......myip/updatedata.aspx then I have the error " System.Data.SqlClient.SqlException: Incorrect Syntax near 32
I see that 32 is the value inside the update command like SET OPT1=107,32, OPT2=25,00, ........and so on Where do I make wrong ?
Thanks

View Replies !

Windows Update Fails And Won't Go Away
I had installed SQL Server 2005 developer on my machine (Vista 64-bit) prior to installing Visual Studio 2005. When I installed VS, I used the default installation, which installed SQL Server Express. Soon thereafter, I started getting notifications in Windows Update about an update to SP2. However, when I try to install it, it fails with "Code 7367", and provides no other useful information. I tried downloading SQL Server Express SP2 myself but it would not let me update the existing instance on my machine. So I totally removed the instance from my machine through add/remove. However, I restarted and the update is still showing up and won't go away!! Does anybody have any ideas of getting this problem?

View Replies !

Insert If Update Fails
Here is my problem. There is a form where some information has to be filled out while the other does not. Information that is left blank is not inserted into the database so that I don't have millions of empty rows. This works perfectly, keeps the database accurate. When someone goes to update, if they add something new it would need to be inserted, since there is nothing to update. I was going to write a procedure, but that seems like such a waste since this will happen often. Is there an sql command in MS SQL to do this. I tried all of the sql commands from other databases I had used. (I am new to MS SQL). If there isn't one does someone have a procedure that won't create a huge amount of overhead.

A.

View Replies !

Bcp Fails When The Called SP Has An Update Statement
This is a very weird problem. SQL 2000. A bcp calls an SP:

bcp "exec MyDB.dbo.usp_DF_NA_Analytics_OOW" queryout SomeFile.dat -T -c -t "|" -S "MySvrMyInst"

SP code:
----------------------------
CREATE PROCEDURE dbo.usp_DF_NA_Analytics_OOW AS
BEGIN
SET NOCOUNT ON

--Declare Variables
DECLARE @CURRENTDATE DATETIME
DECLARE @BEGINTIME DATETIME
declare @feedname varchar(50)
set @feedname = 'DF_NA_Analytics_OOW'
SET @CURRENTDATE = CURRENT_TIMESTAMP

-- ensure there is a row for us - create 1 if it doesn't exist
exec usp_datafeed_timestamp_init @feedname

SET @BEGINTIME = (
SELECT LastRunTime
FROM NewAccounts.dbo.DataFeed_Timestamp
WHERE TaskName = @feedname
)

select oowReason.OOWTransaction_id,
oowReason.Position,
oowReason.ReasonCode,
oowTx.UpdateDateTime
from OOWTransaction oowTx (nolock)
join OOWReason oowReason (nolock)
on oowReason.OOWTransaction_id = oowTx.OOWTransaction_id
WHERE oowTx.UpdateDateTime >= @BEGINTIME and oowTx.UpdateDateTime < @CURRENTDATE
ORDER BY oowReason.OOWTransaction_id, Position

-- update the timestamp
exec usp_UPD @feedname, @currentdate
end
------------------------------

ALTER procedure dbo.usp_UPD (@feedname varchar(50), @lastruntime datetime)
as
begin
set nocount on

if not exists (select * from dbo.datafeed_timestamp where lower(taskname) = lower(@feedname))
       INSERT INTO Datafeed_Timestamp(TaskName, LastRunTime) VALUES(@feedname, @lastruntime )
else
  update Datafeed_Timestamp
  set LastRunTime = @lastruntime
  where TaskName = @feedname
end
----------------------------------------

The above bcp fails consistently unless the "exec usp_UPD" is completely removed.
Even if I substitute it with the update stmt instead of the SP call, it still fails.

I move the usp_UPD call and move it above the select making the select as the last command in the SP -- still fails.
Removed Order by -- still fails.

The weird thing is -- several other SPs that follow the same exact format (only select query is different) - they all succeed everytime.

This above bcp fails everytime unless the usp_UPD is fully removed.
I have tried putting the result dataset into a table variable and select it in the end -- still fails. several other attempt to workaround - fails -- by fails I mean "0 rows returned" from bcp -- when the UPD is removed, it returns the correct dataset. Otherwise always returns 0 rows.

Outside bcp, if I simply execute the SP from QA, it returns the correct dataset everytime. From bcp, it just doesn't like it. It returns 0 rows everytime, but does the UPD task -- the value does get updated adter execution.

Any thoughts/ideas? This thing is driving me NUTS

Thanks,
Rajesh

View Replies !

INSERT Fails To Update Any Rows...
Hello,

I seem to have a strange problem in that my code runs fine, but I am trying to INSERT rows into a database, and the rows affected by the INSERT command is alwsy zero, even though no error is thrown. Hence no data gets inserted.

Here is the code:

void recordTick(string pair, DateTime time, decimal sell, decimal buy)

{

SqlConnection thisConnection = new SqlConnection("Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\FOREX.mdf;Integrated Security=True;User Instance=True");

insert = "INSERT INTO " + pair + " VALUES(" +

"'" + time.ToString("yyyy-MM-dd HH:mms") + "'," +

"'" + sell.ToString() + "'," +

"'" + buy.ToString() + "'" + ")";

thisConnection.Open();

SqlCommand command = new SqlCommand(insert, thisConnection);

Int32 success = command.ExecuteNonQuery(); // success always = 0!

thisConnection.Close();

}

The database is type .MDF that I created with the Project/Add Component/SQL Database menu. I can inspect it easily in Server Exporer and add data manually with no problem.

Can any one suggest how to get the INSERT to actually add the data?

Any help much appreciated!

Anding

View Replies !