I am having some problems with the loading of tab delimited text file (source) to a SQL Server table (destination) using the SSIS data flow task. Package has been executed successfully with no error msg. The number of rows in the text file also matches the number of rows in the SQL table. But, when I check the content of the table, I noticed some of the columns contain NULL which supposed to have value. This happens not to all the rows but only to some rows. I did some testing by removing some rows from the beginning, middle and end of the text file and re-run the package but the result is quite inconsistent. Sometimes, the field got filled, but sometimes, it just contains NULL where it supposed to have value.
I was working all day making changes to my 3MB package. I was adding a large number of transforms that were copied-and-pasted from elsewhere in the same data flow task.
All was going well. I even took the time to have SSIS lay out the task again (1/2 hour). Suddenly I started receiving some strange errors:
After the layout, I noticed two stray components 'way off in the upper right corner. I found that one of them had a duplicate name to a component which had been added hours ago. Even after deleting it, I got "duplicate name" errors.
I copied three components in one selection, and when I tried to paste them, got the error "can't initialize component on paste". I tried them one at a time, but got the same error.
I got errors about COM failures due to marshalling to another thread I then exited Visual Studio and started it again. To my great surprise, the data flow task I was working on was still there, but was completely empty.
Comparing what I'm left with to my last version in source control, I find that the entire pipeline element is missing from the DTS: ObjectData element!
I'm developing a real love/hate relationship with SSIS. It varies from one day to the next. Guess what kind of day this is!
I am experiencing an error where the ssis data flow task would freeze and stop data export from a oledb source to a text file. It doesn't generate any errors the ssis package would just hang. This only happens when I run it in 64 bit mode. When I change the mode to 32 bit the ssis never freezes and runs fine. Has anyone experience this? Is there a fix so I can run my jobs in 64 bit mode?
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task. I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert. Thanks
I have a relatively simple SSIS package that I'm building for a data mining process. The package starts with an OLE DB data source, passes the results of a SQL Command (query) along to a conversion step, which then gets sent to a Term Lookup task. The Term Lookup then writes the result to an OLE DB Data Destination. Pretty simple. The OLE DB data source query returns about 80,000 rows if you run it through SQL WB. The SSIS editor shows 9,557 rows make it out of the source, and into the conversion step, 9,557 make it out of the conversion and into the lookup, and about 60,000 rows make it out of the lookup and are written to the results table. Then the package fails with the following errors listed on the progress screen. I was assuming that the 9,557 was some type of batching that was occurring in the process, but now I'm not so sure.
Thoughts?
Frank
[DTS.Pipeline] Error: The ProcessInput method on component "My Component" (117) failed with error code 0xC02090E5. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. [DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC02090E5. [DTS.Pipeline] Error: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. [DTS.Pipeline] Error: Thread "WorkThread1" has exited with error code 0xC0047039. [My Data Source Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020. [DTS.Pipeline] Error: The PrimeOutput method on component "My Component" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. [DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I have a package that loads staging tables from an Oracle source DB. In the data flow tab I have 30+ read table/write table task combinations. When I run the package 3-4 of the read/write combos execute at a time. What I'm trying to control is the priority order of the combo execution. My goal is to minimize to total load time by having the larger table transfers run first and the smaller table transfers fill in until they are all complete. Currently, the largest table (16 million) transfers last (because it was the last combo that I created?).
I am creating a staging database in which I am loading required tables from 2 different sources. I have 30 different tables to load from source 1 and 10 different tables from source 2. This is the way I am doing, in Control flow task I am using Sequence container and in that I included the data flow task, the data flow task has source OLD DB connection from where I select the table and then destination OLE DB connection where I load the data. So for 30 tables I have one Sequence container with 30 different data flow task and each data flow task has OLE DB source and OLD DB destination. I wanted to find out if this is the efficient way to do, or if there is any other way to do this. And for source 2 shall I put in another package or shall I use the same package with different sequence container and follow the same steps as for Source 1 tables. Please advice. Thanks,
I need to extract data to send to an external agency in their supplied format. The data is normalised in our system in a one to many relationship. The external agency needs it denormalised.
In our system, the parent p has p_id, p_attribute_1, p_attribute_2, p_attribute_3 and the child has c_id, c_attribute_a, c_attribute_b, c_parent_id_fk
The external agency can only use a delimited file looking like
where n is the number of children a parent may have. Each parent can have 0 or more children - typically between 1 and 20.
How can I achieve this using SSIS? In the past I have used custom built VB apps with the ADO SHAPE command but this is not ideal as I have to rebuild each time to alter the selection criteria and and VB is not a good SQL tool.
I met a problem when trying to pass values to a SQL statement through parameters. It's a data flow task. I used the OLE DB connection. My statement is like the statement below(the real statement is little complex):
Select * from myTable where mydate>? and mydate<?
I used the "set query parameter" dialogbox to bulid two parameters varStartTime and varEndTime, the values for the two parameters were set to "1/1/2005" and "12/30/2006" respectively. But when I click the "Parse query" button, I got errors
Parameter Information cannot be derived from SQL statements. Set parameter information before preparing command.
I have referred to the posts, but the problem still exists. Any help will be highly appreciated. Thanks a lot!
Hi All, I have a requirement here to import data from XML file to SQL Database. The XML schema contains of various elements and one of the element is recursive ie. Parameter node contains parameter node within it and it can have n number of iterations. I have given the sample schema below:
But all the nodes contain the data which has to be imported to a single table dbo.Parameters. I cannot use Union ALL since i dont know how many iterations I will have in the file. Is there any way to do this operation in Data Flow Task using XML Source? Can anyone help me on this?
I have an SSIS Package which is designed to import log files. Basically, it loops through a directory, parses text from the log files, and dumps it to the database. The issue I'm having is not with the package reading the files, but when it attempts to write the information to the db. What I'm seeing is that it will hit a file, read 3000 some lines, convert them (using the Data Conversion component), and then "hang" when it tries to write it to the db.
I've run the SQL Server Profiler, and had originally thought that the issue had to do with the collation. I was seeing every char column with the word "collate" next to it. On the other hand, while looking at the Windows performance monitor, I see that the disk queue is maxed at 100% for about a minute after importing just one log file.
I'm not sure if this is due to the size of the db, and having to update a clustered index, or not.
The machine where this is all taking place has 2 arrays- both RAID 10. Each array is 600 GB, and consists of 8 disks. The SSIS package is being executed locally using BIDS.
Hi, I'm trying to implement an incremental data pull (Oracle to SQL) based on Andy's blog: http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx
My development machine is decent: 1.86 GHz, Intel core 2 CPU, 3 GB of RAM. However it seems the data flow task gets hung whenever I test the package against the ~6 million row source, as can be seen from these screenshots. I have no memory limitations on the lookup transformation. After the rows have been cached nothing happens. Memory for the dtsdebug process hovers around 1.8 GB and it uses 1-6 percent of CPU resources continuously. I am not using fast load to insert new records into my sql target table. (I am right clicking Sequence Container 3 and executing this container NOT the entire package in the screenshots)
The same package works fine against a similar test table with 150k rows. http://i248.photobucket.com/albums/gg168/boston_sql92/7.jpg http://i248.photobucket.com/albums/gg168/boston_sql92/8.jpg
The weird thing is it only takes 24 minutes for a full refresh of the entire source table from Oracle to the SQL target table. Any hints,advice would be appreciated.
I get the following error when trying to import (have tried flat files, Excel & Access). I've searched but have not found a resolution. Any help is appreciated.
Jeff
Validating (Error)
Messages
Error 0xc00470b6: Data Flow Task: The LocaleID 0 is not installed on this system. (SQL Server Import and Export Wizard)
Error 0xc004706b: Data Flow Task: "component "Source - Test1" (1)" failed validation and returned validation status "VS_ISBROKEN". (SQL Server Import and Export Wizard)
Error 0xc004700c: Data Flow Task: One or more component failed validation. (SQL Server Import and Export Wizard)
Error 0xc0024107: Data Flow Task: There were errors during task validation. (SQL Server Import and Export Wizard)
In my SSIS Data Flow Task, I have a query that retrieves data based on a couple of date parameters. Is there a way we can pass/use the Variables defined in the SSIS package in the query ?
(I am assigning values to those variables from C# code)
The query should look like this:
select ordernumber, customerid from salesorder
where statecode=3 and datefulfilled between @variable1 and @variable2
I have a flat file which is loaded into the database on a daily basis. The file contains rows of strings which I load into a table, specifically to a column of length 8000.
The string has a length of 690, but the format is like 'xxxxxx xx xx..' and so on, where 'xxxx' represents data. So there are spaces, etc present in the middle.
Previously I used SQL 2000 DTS to load the files in, and it was just a Column Transformation with the Col001 from the text file loading straight to my table column. After the load, if I select len(col) it gives me 750 for all rows.
Once I started to migrate this to SSIS, I allocated the Control Flow Task and specified the flat file source and the oledb destination, and gave the output column a type of String and output column width of 8000. But when I run the data flow task it copies only 181 or 231 characters out of the 750 required. I feel it stops where it finds the SPACES and skips the rest.
I specified row delimiters or CR, and LF. I checked the file under UltraEdit and there were no special characters in the file that would cause the problem.
Any suggestions how I can get it to load the full data?
I have huge data and i am loading data from EXCEL to database table, after loading 80 percent data i am getting some error. My package got failed and it has lots of transformation and took around 6 hours to process completely because of that i don't want it to reload from start. if i run it again it should start from next record from where i got the error.
I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:
The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.
Then when I try to delete it it gives this other error:
Cannot remove the specified item because it was not found in the specified Collection.
I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.
Any suggestions why this is happening and how to fix it?
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination) Could you tell me why then other is slower?
I have a stored procedure that is executed via a sql script task that returns a full result set. I map this result set to a variable or object type. Is there a way to use this variable as a data source in a subsequent data flow task?
I'm trying to get a record count out of a databse using OLE DB Source and row count tasks but keep getting an error. I set up a variable as int32 and select the variable name in the row count task and when I go to the Input Columns tab to select a field to count, it gives me this error:
Error at Data Flow Task[Row Count[505]]: The component "Row Count" (505) has forbidden the requested use of the input column with lineage ID 32.
I created a package with SQL 2005. The package gets the Access DB and then inserts it into SQL Server.
If I open the package in .NET, I can see the SQL Task and Data Flow Task. The SQL Task has a property sqlstatementsource, which has the necxessary SQL code to create the tables.
How can I tell the SQL Task to recompile the SQL code if I give it another DB name, because the tables differ and don't map in the Data Flow Task
This is a question to the SSIS development team. I would like to know what are the requirements to implement custom SSIS Control Flow task in C++ . There is a documentation describing the process when implementing a managed task, but no such documentation exists for implementing a task in C++.
I have a table which has been loaded from various source feeds. The SourceId relates to the source name and the SourceCompanyId is the sources primary key for the company. I am basically trying to create one row with all the SourceCompanyIds in my column headers. What data flow tasks would be necessary in SSIS?
I want to export data from SQL Server2005 to an Excel spreadsheet thru "Data Flow Task". I am using OLE DB for SQL Server for the source connection and a Connection To Excel as my destination source. The Excel spreadsheet (2003) exists and has the first row with column names. I don't have any warnings before trying to execute.
While executing the tasks, I got the error Error: 0xC0202025 at Data Flow Task, Excel Destination [427]: Cannot create an OLE DB accessor. Verify that the column metadata is valid. Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "Excel Destination" (427) failed the pre-execute phase and returned error code 0xC0202025.
After analysing I found in the DataFlow --> Excel destination --> Advanced Editor for Excel Destination, the default data type for txtRemarks shows as "Unicode string [DT_WSTR]". But this is supposed to be "Unicode text stream [DT_NTEXT]". Even if I change the data type in the design time, It doesn't accept.
I am new to SSIS. I need some help in designing the below dataflow task.
-- Teacher creates several tasks and each task is assigned to multiple students -- The teacher table contains contains all the tasks created a every teacher use ods go create table teacher ( yr int, tid int, tname varchar(20), taskid int
)
insert into teacher values(2007,101,'suraj','task1') insert into teacher values(2007,101,'suraj','task2') insert into teacher values(2007,102,'bharat','task3')
insert into teacher values(2007,103,'paul','task4') insert into teacher values(2007,103,'paul','task5') insert into teacher values(2007,103,'paul','task6')
-- Teacher "suraj" has created 2 tasks -- Teacher "bharat" has created 1 task
select * from ods..teacher yr tid tname taskid ============================ 2007 101 suraj 1111 2007 101 suraj 1122 2007 102 bharat 2222
-- Students table contains studentid(sid),teacherid(i,e tid ) & taskid drop table students
create table students ( yr int, sid varchar(10), tid int, taskid varchar(10) )
truncate table students
insert into students values(2007,'stud1',101,'task1') insert into students values(2007,'stud1',101,'task2')
insert into students values(2007,'stud2',101,'task1') insert into students values(2007,'stud2',101,'task2')
--Note : stud1,stud2 comes under teacher with tid "101"
insert into students values(2007,'stud3',102,'task3')
-- Note : stud3 and stud4 comes under teacher with tid "102"
insert into students values(2007,'stud4',103,'task4') insert into students values(2007,'stud4',103,'task5') insert into students values(2007,'stud4',103,'task6')
insert into students values(2007,'stud5',103,'task4')
select * from students yr sid tid taskid ---------------------------- 2007 stud1 101 task1 2007 stud1 101 task2
Now in my target table i need to load the data in a such a way that
use targetdb go drop table trg go
create table trg ( yr int, -- data should load from teacher.yr tid int, taskid int(20), cnt int
)
Mapping in target column and value to be loaded ================================================== yr -- teacher.yr tid -- teacher.id taskid -- this need to start a new sequence of numbers starting from 1 for each teacher and dont want the task id to be copied as it is. cntofstudents -- need to count no of students from "students" table for a given teacher and for his assignment
For example for teacherid "101" and taskid "task1" there are 2 students again for the same teacher "101" and taskid "task2" there are 2 students
For teacher "102" and taskid "task3" there is only 1 student
Similary for teacher "103"
Relation ========
Teacher table | Students Table yr | yr tid | tid
After i run the ETL the data should look as follows :
insert into trg values(2007,101,1,2) insert into trg values(2007,101,2,2)
insert into trg values(2007,102,1,1)
insert into trg values(2007,103,1,2) -- task4 is created by teacher "103" and assigned to 2 students stud4 and stud5 insert into trg values(2007,103,2,1) -- task5 is created by teacher "103" and assigned to 1 student i.e stud4 insert into trg values(2007,103,3,1) -- task6 is created by teacher "103" and assigned to 1 student i.e stud5
Note : If u observer the values in 3rd column of the trg table, instead of directly mapping the taskid we need to generate a separate sequence for every teacher.
BottomLine : for each and every task created by each teacher there should be a unique record along with the count of students in "STUDENTS" table
Can anyone help me out in designing the Data Flow task for this Functionality.
Hi there. I'm trying to learn SSIS, please, help me. I have 2 questions:
1) There are 2 databases on 2 different servers. I need to get data from Table1(database1) and put it to Table2(database2). But I have to insert rows, which ID is not exists in Table2. How Can I do necessary filter?
2) In the OLE DB DataSource Component I have used SQL Command(it's simplified):
declare @TmpTable TABLE (WorkCode int not null);
INSERT INTO @TmpTable (WorkCode) select WorkCode from Table1
SELECT WorkCode FROM @TmpTable
SSIS Package works without any exception. But there is no any inserted record in destination table. If I try similar query without temporary table - it works good. Why?
I have SQL Server 2005 Express edition on my machine. On an SSIS project in BIDS, when i drag a "Data Flow Task" to the package it returns the following error:
The designer could not be initialized. (Microsoft.DataTransformationServices.Design)
Does this has anything to do with the fact that i don't have SSIS installed on my machine?
I thought that SSIS was only needed (on my machine) for the runtime, just to run the packages. To create and edit the pachages i need to install SSIS on my machine too? this doesn't makes sense, maybe it's another problem.