SSIS Error: The Connection Does Not Support Enlisting In Distributed Transaction. Error Code: 0x8000FFFF
Hi all,
can anyone tell me if an oleDb connection (provider is Jet 4.0 to Access database) can be enlisted in a Distributed Transaction?
The goal is to copy data from SqlServer to Access within a transaction.
Pier
View Complete Forum Thread with Replies
Sponsored Links:
Related Messages:
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB Error Has Occurred. Error Code: 0x8000FFFF.
Hi All, Recently in an SSIS package I am getting the following error for a particular Data flow task. Error: 2008-01-25 12:01:48.58 Code: 0xC0202009 Source: Import Datasynapse Data User Events Source [3017] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF. End Error Error: 2008-01-25 12:01:48.73 Code: 0xC004701A Source: Import Datasynapse Data DTS.Pipeline Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009. End Error Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error? Since this is very urgent, immediate response would be very much appreciated. Thanks & Regards, Prakash Srinivasan
View Replies !
View Related
How Can SQL Server DTC Be Stopped From Automatically Enlisting A Remote Server In A Distributed Transaction?
How do I stop a remote query that INSERTS into a local table from being automatically "upgraded" to a distributed transaction? I am using Windows 2000 server and SQL Server 2000 SP3a on both machines. I am executing the following statement in Query analyzer. INSERT MyLocalServer (col1) EXECUTE MyRemoteServer.Master.dbo.sp_executesql @RemoteQuery, @ParameterDefinition, @Paramter = 'somevalue' @RemoteQuery consists of a SELECT four-table join, all tables are on the same linked server. The Linked server has been set up on MyLocalServer using the "Microsoft OLE DB for SQL Server" provider. In the "Provider Options" for the linked server properties I checked "Non transacted updates" and "dynamic parameters". In the "Server Options" tab I have checked "RPC", "RPC Out", "Data Access". The EXECUTE part of the query runs great (and returns the data very fast) by itself. But with the INSERT part, the query fails and returns the error: "Server: Msg 7391, Level 16, State 1, Line 17 The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ] OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]." The two servers are seperated by firewalls, so I believe the reason the query is failing is that I haven't followed the procedures for setting up the ports etc described in one of the microsoft support articles: e.g.: 250367. Configuring the ports involves too much company politics, and besides, for what this query does, it does not need the benefits of a distributed transaction. How can I execute my query without SQL Server automatically trying to upgrade it to a distributed transaction? More Info: I can execute the query as a straight INSERT/SELECT linked-server query and it does the INSERT on the local SQL Server just like I want it to, so I assume it is not trying to use distributed transactions; but it takes around 7 seconds to run even though the entire SELECT is executed on the linked server, whereas executing with sp_executesql takes only 1 second. I thought selected "non-transacted updates" in the provider would solve this problem, but it did not. Anyone know the answer?
View Replies !
View Related
Error 8525: Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.
Hi All I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link. If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser. I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off. set XACT_ABORT ON Begin distributed Tran update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.TRANSACTIONMAIN set REPFLAG = 0 where REPFLAG = 1 and DONE = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.WBENTRY set REPFLAG = 0 where REPFLAG = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.FIXED set REPFLAG = 0 where REPFLAG = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.ALTCHARGE set REPFLAG = 0 where REPFLAG = 1 update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT set REPFLAG = 0 where REPFLAG = 1 update TSADMIN.TSAUDIT set REPFLAG = 0 where REPFLAG = 1 COMMIT TRAN It's got me stumped, so any ideas gratefully received.Thx
View Replies !
View Related
Ssis Oledb Connection Error Code: 0x80040E21.
howdy, i have a sqlserver2005 ssis package which connects to a mysql webserver to upload data. i am connecting via mysql oledb connection and am able to test connect ok through the oledb connection manager. However in my ole db destination editor i get an 0x80040E21 error when trying to preview a table . The full error is : Error at Data Flow Task [Destination - Query [70]]: An OLE DB error has occurred. Error code: 0x80040E21. Error at Data Flow Task [Destination - Query [70]]: Opening a rowset for "INFORMATION_SCHEMA.address_book" failed. Check that the object exists in the database. ------------------------------ ADDITIONAL INFORMATION: Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap) I can see all the tables in the drop down box in connection manager. This has been driving me nuts for the last 3 days! I have tried changing some of the security connection settings to no avail, (although i am not sure on what these do).I have also tried setting up as an odbc connection using script components but had memory errors after copying several hundred records and the package just hangs. I can go into this in more detail however i dont think they are related issues and i would prefer oledb as i dont have to script my data transfer. any help much much appreciated. thanks
View Replies !
View Related
Distributed Transaction Error, Need Help Please!!
Hi, I have configured a linked server, and i have a procedure which makes an UPDATE in a local table using the data in the linked server. Specifically, I have a function which checks if a given code exists in a linked server's table. The UPDATE changes the value of a column in a local table, if the function returns 1. I've run the procedure and it gave an error after a few hours cause a simple conversion error inside the function. I solved the error. After this, the procedure did not work more. It gives me the following message: Server: Msg 7391, Level 16, State 1, Procedure EXISTEONC, Line 16 The operation could not be performed because the OLE DB provider 'MSDASQL' was unable to begin a distributed transaction. (EXISTEONC is the function, and in the line 16 there is an OPENQUERY) Im sure MSDTC is working... i'm lost because i dont know why it worked the first time and not now. Ive also wrote the function again as it was before, but it still doesent works. Thanks a lot...
View Replies !
View Related
Distributed Transaction Error
Hi all, I encountered this problem when tried to perform a distributed transaction using link server. My aim was to connect 2 data base servers using TCP/IP and transfer data. I was able to run single queris using "linkserver.catelog. owner.table". But this message was shown when i tried to execute a stored procedure. The message was "The operation could not be performed since OLEDB provider SQLOLEDB doesn't support distributed transactions. [OLE/DB distributed transaction error]" The documentations about the distributed transactions showed that SQLOLEDB do support distributed transactions. Please forward your valueble suggestions. Thanks in advance, Sabu
View Replies !
View Related
Distributed Transaction Error
Hi All, I am getting the following error when I execute a Stored Procedure which has some distributed transactions in it. The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. I have enables the MSDTC serveices on both the SQL servers according to the steps given in this site http://support.microsoft.com/default.aspx?scid=kb;en-us;839279#appliesto But, the same stored procedure is working fine from one SQL server and it is not working on the other SQL server. Can any one help me in resolving this issue? thanks in advance. Regards, Vijay
View Replies !
View Related
Distributed Transaction Error - Help Urgent
i have two remote servers connected to each other through the linked servers. i can run querries or even perform inserts as far as its not inside a transaction but when i am trying to run distribted transaction but it keeps on returning the same msg. Server: Msg 7391, Level 16, State 1, Line 3 The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ] OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. i have configured the firewall, made sure the DTC service is started on both and enabled. they both have the same Sp packs, same config.
View Replies !
View Related
Distributed Transaction Completed Error.
Hi, I have an ASP application which uses a COM object to read/write/delete/update data from a SQL Server 2000 (SP3). In the ASP page on the first line I have: <%@TRANSACTION=REQUIRED%> and for commiting or aborting the transactions I use ObjectContext.SetComplete or ObjectContext.SetAbort The application works fine but under heavy use it sometimes throws the error: [Microsoft][ODBC SQL Server Driver][SQL Server]Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. The error code is -2147217900 If I do not use MS DTC in the ASP page, I don't get this error any more but also I don't have the transaction integrity (sometimes I have to update also some other database). Any help would be greatly appreciated. Sorin
View Replies !
View Related
Distributed Transaction Error From CLR Trigger
I have a stored procedure in SQL2005 that queries and updates a linked oracle server. The sp runs fine from Management Studio, but when called by a CLR trigger I get the following error message: Command attempted: if @@trancount > 0 rollback tran (Transaction sequence number: 0x000000000000000032DD00000000, Command ID: 1) Error messages: The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLE_LINK" was unable to begin a distributed transaction. (Source: MSSQLServer, Error number: 7391) Get help: http://help/7391 The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLE_LINK" was unable to begin a distributed transaction. (Source: MSSQLServer, Error number: 7391) Get help: http://help/7391 A .NET Framework error occurred during execution of user defined routine or aggregate 'PriorityTrigger': System.Data.SqlClient.SqlException: The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLE_LINK" was unable to begin a distributed transaction. Changed database context to 'pims'. OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLE_LINK" returned message "New transaction cannot enlist in the specified transaction coordinator. ". System.Data.S (Source: MSSQLServer, Error number: 6549) Get help: http://help/6549 Any thoughts or direction appreciated Richard
View Replies !
View Related
SSIS, Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure. for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR. I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties. if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. and Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database. Please help me it's very urgent.
View Replies !
View Related
How To Configure Distributed Transaction / XA Support Using Microsoft SQL Server 2005 JDBC Driver.
I am trying to configure distributed transaction and XA support using Microsoft SQL Server 2005 JDBC Driver. I have coppied SQLJDBC_XA.dll from XA directory and placed in my sql server binn directory and trying to run the script xa_install.sql from binn directory with command as below : C:Program FilesMicrosoft SQL Server80ToolsBinn> osql -U sa -n -P admin -S localhost -i C:JavaLibrariesMS SQL Driversqljdbc_1.2enuxa xa_install.sql But I am getting error saying : [DBNETLIB]SQL Server does not exist or access denied. [DBNETLIB]ConnectionOpen (Connect()). when I replaced local host with the machine name it gives error : [Shared Memory]SQL Server does not exist or access denied. [Shared Memory]ConnectionOpen (Connect()). where in I am able to test connection from Websphere using the same connection. Please help some one ....... I am in URGENT need.... I need to enable XA suport for my application to run........ Thanks ----
View Replies !
View Related
Error While Performing A Distributed Transaction On Linked Server
I have a Linked Server i.e. my SQL Server 2000 is Linked to the OracleDatabase.The Link is perfect and dont have any problems in accessing the datafrom SQL Server 2000. The only problem i am facing is when i am tryingto initiate a Distributed transaction. A simple Insert Query isworking fine but when i try to perform the same through a StoredProcedure having the Begin Transaction i am getting the errormentioned below.Server: Msg 7391, Level 16, State 1, Procedure InsertGFSTemp, Line 12The operation could not be performed because the OLE DB provider'MSDAORA' was unable to begin a distributed transaction.OLE DB error trace [OLE/DB Provider 'MSDAORA'ITransactionJoin::JoinTransaction returned 0x8004d01b].I have tried all the help available and have all the supportedsoftwares installed as well on the SQL Server machine. Still facingthis problem.If anybody could help me with the same.
View Replies !
View Related
Error In Enforcing Distributed Transaction With Oracle Source.
Please help... To achieve a near real-time load from Oracle as the source, I am using a simple queue table that includes the table_name and table_id of my transacting tables and using parameterized OLEDB query reading the record and using OLEDB task to delete the queue record. Everything is fine except when I try to enforce the distributed transaction, I get the following error: The AcquireConnection method call to the connection manager "...." failed with error code 0xC0202009. I replaced the release version of Oramts.dll from Oracle site, since the supplied one for Oracle 9i was shipped as debug version! and also I am able to run my simple C# program for testing distributed transaction. Can somebody tell me if I am missing something in SSIS or if there is a better way for real-time load from Oracle source? Best Regards,
View Replies !
View Related
SQL To Oracle Update Trigger Fails Due To Distributed Transaction Error 7391
Hi,I am having a hard time creating a Trigger to update an Oracledatabase. I am using a SQL Server 2005 Express database on a Win XP ProSP2 desktop, linked to an Oracle 10g database on a remote Windows 2003server. Both machines are on the same domain and very close physically(<1ms ping).I have set up the Oracle linked server in SQLEXPRESS, added thelogin/pw information, and I can execute select and update queriessuccessfully using both four-part naming and OPENQUERY.Here is the actual trigger that I created:USE [AdventureWorks]GOSET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOCREATE TRIGGER [MyTrigger]ON [Person].[Contact]AFTER UPDATEASBEGIN DISTRIBUTED TRANSACTIONSELECT * from oradb..schema.tableWHERE username = 'user'COMMIT TRANHowever, when I update a row in AdventureWorks.Person.Contact, there isa lag of about 2 seconds, and then I receive an error 7391 with thefollowing message: "The operation could not be performed because OLE DBprovider 'MSDAORA' for linked server 'oradb' was unable to begin adistributed transaction."Now, when I remove the "BEGIN DISTRIBUTED TRANSACTION" and "COMMITTRAN" from the trigger, I can update the row without any delay or errormessage.(Don't pay attention to the fact that the triggered action is a SELECTstatement. It also fails with an UPDATE statement, whether or not I use"BEGIN DISTRIBUTED TRANSACTION." I thought using the SELECT statementillustrates the problem more clearly.)If I replace the triggered code with an update to a SQL Server databaseon that same server (even using "BEGIN DISTRIBUTED TRANSACTION"), thenit works correctly. This leads me to believe that MS DTC is configuredproperly on both machines. There is no firewall between the twomachines, and I can Telnet from the desktop to the database server onport 135.I have gone through many MSKB articles (280106, 839279, 329332, 259959,193893, "Troubleshooting Oracle Publishers" from BOL), and archivednewsgroup posts but have been unable to find any resolution for thisproblem. I would appreciate any assistance you may provide.Best regards,George
View Replies !
View Related
Distributed Install - Connection Error
we have a sql server 2005 reporting services distributed installation db server has: sqldb01dev, sqldb01 st, sqldb01eta web server is TestWeb01. This had dev, tst, beta installations of report server all reports are working ok except on beta. Beta was setup just a couple days ago so it has not worked thus far. all reports use a shared data source on beta(just like on dev and tst) here is the error on beta for all the reports: any idea? (SQLDB01_DEV is not the shared data source name. SQLDB01_DEV was used by the developer when creating the report. But this should not matter right? The report should ignore this and use the shared data source i assume?) An error has occurred during report processing. Cannot create a connection to data source 'SQLDB01_DEV'. For more information about this error navigate to the report server on the local server machine, or enable remote errors
View Replies !
View Related
When I Use SSIS For Extract From OLAP Database, Then The Error Random Occurred,Error Code = 0x80040E05
I have tired for this! When I use SSIS for extract data from ssas, that means,I use mdx query. then random error occured. Hope some one can understand my poor English.... And the Error Info show below. Code Snippet Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.". Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
View Replies !
View Related
Error: The AcquireConnection Method Call To The Connection Manager &&"Excel Connection Manager&&" Failed With Error Code 0xC0202009.
Hi, I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue : I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ? Here is the error code i am getting: [Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. Appreciate your time and patience !! Thanks
View Replies !
View Related
Implementing Transaction In SSIS Package - [Execute SQL Task] Error: Failed To Acquire Connection &&"&&<ConnectionName&&>&&".
I have a simple SSIS package with three "Execute SQL Tasks". I am using ADO.Net Connection to execute SPs on a DB server. When I execute this package It works fine. So far so good. Now, I need to implement transation on this package. And problem starts now onwards. When I try to execute package after setting TransationOption = Required for the Sequence container which contains all the tasks, I get following error. [Execute SQL Task] Error: Failed to acquire connection "NYCDB0008.Export". Connection may not be configured correctly or you may not have the right permissions on this connection. "NYCDB0008.Export" is the name of the ADO.Net connection. I have been hunting for any solution but all in vain. I have tried changing all DTC settings on the dev as well as Database server. Please respond if anyone has any solution. Thanks! Anand
View Replies !
View Related
Enlisting Script Component In Current The Transaction
I have an SSIS package with its TransactionOption set to 'Required'. A data flow in the package has a script component that performs updates to a database table. The TransactionOption on the data flow is set to 'Supported'. However the script component apparently does no get enlisted to the current transaction because the updates made in the script component do not get rolled back when the package fails. Documentation about the AquireConnection method indicates passing a 'transaction handle' parm to the AquireConnection method. I'm thinking that I need to pass this 'transaction handle' to the AquireConnection method of the connection used by the script in order for the script to become part of the current transaction. How do I determine it what the transaction handle is? I have no idea what value I should be passing. I am new to Sql Server beginning with Sql Server 2005. I have no background with DTC. My code in the script currently is: dbConnMgr = Me.Connections.ADONetConnection dbConnection = CType(dbConnMgr.AcquireConnection(Nothing), SqlConnection) I need to pass the transaction handle rather than 'Nothing' to the AquireConnection method but don't know what the transaction handle is. Thanks. D.
View Replies !
View Related
TRANSACTIONS In SSIS (error: The ROLLBACK TRANSACTION Request Has No Corresponding BEGIN TRANSACTION.&&"
I'm receiving the below error when trying to implement Execute SQL Task. "The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran' I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work. Anyone know of the reason?
View Replies !
View Related
SSPI Handshake Failed With Error Code 0x8009030c While Establishing A Connection With Integrated Security; The Connection Has Be
Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application He got this error Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140] and When I see the log event after that error, it comes with another error. SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140] He has IIS5 and me too. I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines. and in the connection string I have. <add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/> I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SElevalencia. Thats strange. The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000. If you want me to send logs please tellme
View Replies !
View Related
Error Code: 60000000b8 Server Could Not Continue Transaction
Hi, does anybody know this error code? I get that error from a jdbc-connection ocasionally but can't find an explanation. The original message is in German. The number should be ok. The error occures when a transaction is aborted, the jdbc-connection is lost. 'Der Server konnte die Transaktion nicht fortsetzen. Beschreibung: 60000000b8' Please help, Many thanks
View Replies !
View Related
The Microsoft Distributed Transaction Coordinator (MS DTC) Has Cancelled The Distributed Transaction.
We have a test db, a staging db and a live db. I have a stored procedure that runs fine on test and staging, but throws the following error on live. The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction. The stored procedure uses linked servers and a transaction. We're using the following transaction code in the stored procedure BEGIN BEGIN TRANSACTION BEGIN TRY --- procedure stuff here --- COMMIT TRANSACTION END TRY BEGIN CATCH DECLARE @ErrorSeverity INT, @ErrorNumber INT, @ErrorMessage NVARCHAR(4000), @ErrorState INT SET @ErrorSeverity = ERROR_SEVERITY() SET @ErrorNumber = ERROR_NUMBER() SET @ErrorMessage = ERROR_MESSAGE() SET @ErrorState = ERROR_STATE() IF @ErrorState = 0 SET @ErrorState = 1 RAISERROR ('ERROR OCCURED:%d', @ErrorSeverity, @ErrorState, @ErrorNumber) IF XACT_STATE() < 0 ROLLBACK TRANSACTION END CATCH END I found the following link which seems to be the problem we're experiencinghttp://support.microsoft.com/kb/937517 The link includes a workaround which is the following: "To prevent the SQLNCLI provider from sending an attention signal to the server, use the SQLNCLI provider to consume fully any rowsets that the OLE DB consumer creates. " How do I use the SQLNCLI provider to fully consume any rowsets?
View Replies !
View Related
Using RetainSameConnection During Distributed Transaction In SSIS ForEach Container
Hi - I've seen variations on this question in this forum, but none of the suggestions work for me, so any ideas would be greatly appreciated! I have a SSIS package whose function is to monitor a directory for flat files and distribute the information in these files into a SQL 2005 DB for further processing later. I've configured Transactions for the package as serializable and supported, and I have a ForEach container set to serializable and required. All SQL and Data Flow tasks take place within this container. I have a single Connection Manager to pull in the flat input file, and another for the connection to the SQL DB. This setup will function, and roll back if necessary, but I take a huge hit on the continual establishment of connections to the DB. If I set the retainsameconnection property on the SQL DB Connection manager, I get an error when executing my first Data Flow task to move data from the flat input file to working tables within the DB: 0xC001A004 - Incompatible transaction context was specified for a retained connection. If I turn off Transaction support, the retainsameconnection property works as expected. I've been running Profiler Traces, and can verify that no connection has been established to the SQL Server prior to execution of this task, so it seems like the context should be OK. I would welcome any feedback, suggestions or alternatives. Thanks, Jim SweeneySLC
View Replies !
View Related
Error Code 0xC0202009 + Connection Password
Hi, I have developed a .dtsx package than runs normally from my computer. When I import it on the server and assign it to a job it always fails. I tried also to run it directly from the server (remote desktop) and also faild. I exported the dtsx file on server and refresh the db connections and after that workd fine from the server. Another work-around was to use windows authentication. Then runs normally from the server. It seems that connection password is lost when importing the report on server. (The import is done in MSDB not in the filesystem) But I can not design all the jobs on the server (work-around A) or use windows authentication (work-around B) What is the problem and what can I do? I have also played around with "save sensitive information" but with no results. Thanks
View Replies !
View Related
Connection.close Returns A 91 Error Code...
I have the next code in my proyect: If CurrentProject.IsConnected Then MsgBox "Base ya Conectada.Procedemos a cerrarla primero", vbOKOnly If SQLConexion.State = adStateOpen Then SQLConexion.Close SQLConexion.Close End If SQLConexion.Open SQLSentencia AbreConexionSQLSERVER = 0 If I detect that the connection is opened while I am initializazing varriables, I want to close always the connection and then begins my aplicattion always opening the connection, but it always returns a error 91.. suggestions?
View Replies !
View Related
SSIS Error Code -1071607778
Hi, I have a lookup in my SSIS package that looks up the data from a database table and matches it with the data from another table. For example Field A in Table 1 with Field B in Table 2, Table 1 is the transactional data and Table 2 contains the value to refer to. For some reason, I get error code -1071607778 in the output file when the lookup fails, but the values are in both Table 1 and Table 2. Has anyone encountered this error before and what does error code -1071607778 mean ? Regards Ash
View Replies !
View Related
SSIS Error Code DTS_E_OLEDBERROR
Does anyone know what this mean? Executed as user: DATACENTERsqlagent. ....00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 5:13:54 AM Error: 2008-01-22 06:44:53.94 Code: 0xC0202009 Source: ppc_report_data_etl_agg Source from ETL [1] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x00040EDA Description: "Warning: Null value is eliminated by an aggregate or other SET operation.". End Error Error: 2008-01-22 06:44:53.94 Code: 0xC0047038 Source: ppc_report_data_etl_agg DTS.Pipeline Description: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source from ETL" (1) returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is... The package execution fa... The step failed. Thanks, -Ash
View Replies !
View Related
SSIS Error Code DTS_E_OLEDBERROR
I backed up a database from SQL 2005 32 bit version and restored it to SQL 2005 64 bit version. My DBA ran a task and received the following error. He received information to reinstall MDAC. I am doing this tomorrow but am wondering if there is another solution. Thanks. ____________________________________________ Executed as user: GSBsqladmin2000. ...n 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:30:46 AM Progress: 2008-01-28 08:30:46.75 Source: Copy Data from Results to Sent Task Validating: 0% complete End Progress Progress: 2008-01-28 08:30:46.75 Source: Copy Data from Results to Sent Task Validating: 33% complete End Progress Error: 2008-01-28 08:30:47.08 Code: 0xC0202009 Source: Survey Returned Weekly Connection manager "Connection 2" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered". End Error Error: 2008-01-28 08:30:47.08 Code: 0xC020801C Source: Copy Data from Results to Sent Task OLE DB Destination [49] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONM... Process Exit Code 1. The step failed.
View Replies !
View Related
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.
I am having 2 severs (SQL2000 & SQL2005), there is already one DTS package in SQL 2000, now i have migrated DTS package to SSIS package. Now the problem is DTS package is having ActiveX script and it was executing perfectly in 2000 server but after migrated to 2005 server if i am executing the coverted SSIS package it is giving one error and the error is displaying here. Error 1 Validation error. DTSTask_DTSDataPumpTask_1: OLE DB Destination [181]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Microsoft OLE DB Provider for SQL Server Copy" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. SearsCDCC_Transfer (1).dtsx 0 0 and i am also displaying the ACtiveX code as well and here oma11pngrdb02 is 2000 server and sant01pngrdb is 2005 server. '********************************************************************** ' Visual Basic ActiveX Script '************************************************************************ Dim gsErrorFile gsErrorFile = "\oma11pngrdb02App_Data_ReportingSearserrors2.txt" Function Main() Main = DTSTaskExecResult_Success set objftp = CreateObject("ftpx.aspftp") objftp.sServerName = "10.1.3.175" objftp.sUserID = "COS.FTP " objftp.sPassword = "SENDFILE" if objftp.bConnect then dim fname, lfname fname = "$IOMH04.PRDFFTAP.ST462330" lfname = "\oma11pngrdb02App_Data_ReportingSearscdccfile.txt" If objFTP.bGetFile (fname, lfname ) then Main = DTSTaskExecResult_Success Else logError("Error getting file: " & objFTP.sErrorDesc) Main = DTSTaskExecResult_Failure End If Else logError("Error connecting: " & objFTP.sErrorDesc) Main = DTSTaskExecResult_Failure end if End Function Any Idea what is going on and how to solve it?
View Replies !
View Related
The AcquireConnection Method Call To The Connection Manager &&"&&<Connection Name&&>&&" Failed With Error Code 0xC020200
Hi All, I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job: The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009. while I running the SSIS package on BI environment, I am getting the following error: [Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.". I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful. I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence. I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem. If anyone can help me it will be great. or it is a bug in SSIS? Thanks. Jena
View Replies !
View Related
SSIS Transaction ERROR
Hi all, I'm having an issue with transactions in SSIS. I have a Sequence Container, that contains 5 Tasks. 1) Data Flow Task using an OLEDB Connection to access an Oracle RDB database via a linked server. then insert into SQL Server 2005. 2) Execute Sql Task on Sql Server 2005 (UPDATE Statement) 3) Execute Sql Task on Sql Server 2005 (DELETE Statement) 4) Data Flow Task using an OLEDB Connection to insert data into a SQL Server 2005 DB 5) Execute Sql Task performing an UPDATE statement on an Oracle RDB database using an OLEDB Connection to to access the database via a linked server If the Sequence container and all contained tasks are set to Transaction: Supported (No transaction will be created I believe), then the package runs successfully. If I change the Sequence container to Transaction: Required, and leave all contained tasks as Transaction: Supported, then Task 1 fails with the following error: [SELECT From RDB Change Table [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SSISPOC" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. Any Ideas would be much appreciated, as I'm stumped!
View Replies !
View Related
SSIS Error Code DTS_E_THREADFAILED And DTS_E_PRIMEOUTPUTFAILED.
Hi I have a SSIS package which extracts data from a progress database (Version 10) and writes to a SQL table. I use a data reader to extract the progress data from the source however I have a problem. When I try to extract one extra field (a text field of 2000 characters) into my SSIS routines I get the following error message. I have supressed this before on other routines using the fetch array size on the odbc connection however I cant resolve the problem with this field. I know progress is a tricky data source however does anyone have any thoughts on whether this is a limitation on the odbc drivers or something which I can handle in SSIS i.e. reduce the input of rows, tweak buffer size? If so does anyone have any suggestions on settings to try - currently they are the default. The Error Message :- "SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread4" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited. SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread3" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited. SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited. SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread2" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited. SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled. SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled. SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread4" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled. SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled. SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited. SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "RM Job" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure. The component "RM Job" (1) was unable to process the data. " Thanks Dan.
View Replies !
View Related
Sequence Timeout - SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER
Help please... in first package of a migration solution (6 packages), have got a sequence container that "loops around" setting up initial mapping data for 17 tables (each table has 2 tasks within the control flow - purge / clean out and then re-populate - ). the package has "transactionOption" set to required, as does the sequence container. when i run the individual control flows, all goes ok when i run the sequence container on the server (same one as database), all goes ok. when i run the sequence container on my PC via VisualStudio 2005, get the above mentioned error code... Task Purge FirstContactMethod_Mapping Table Start, 11:00:14 a.m. Validation has started Validation is completed Progress: Executing query "DELETE FROM zMapping_FirstContactMethod". - 100 percent complete Finished, 11:00:14 a.m., Elapsed time: 00:00:00.031 Task Load FirstContactMethod_Mapping Table Start, 11:00:14 a.m. Validation has started [DTS.Pipeline] Information: Validation phase is beginning. Progress: Validating - 0 percent complete Progress: Validating - 33 percent complete Progress: Validating - 66 percent complete Progress: Validating - 100 percent complete Validation is completed [DTS.Pipeline] Information: Prepare for Execute phase is beginning. Progress: Prepare for Execute - 0 percent complete Progress: Prepare for Execute - 33 percent complete Progress: Prepare for Execute - 66 percent complete Progress: Prepare for Execute - 100 percent complete [Create FirstContactMethod_Mapping Table [56]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Source_OLEDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. [DTS.Pipeline] Error: component "Create FirstContactMethod_Mapping Table" (56) failed the pre-execute phase and returned error code 0xC020801C. [DTS.Pipeline] Information: Cleanup phase is beginning. etc... etc... this also occurs on a second migration solution we have developed. in both cases, it occurs after c. 30 seconds of operation for the above error, SSIS is trying to open the table to do a "OpenRowset Using FastLoad" - with the CommandTimeout set to 0. we do not think it is due to the transaction being set - was occuring before we added transactions - think it is a timeout within the container object. We have set the CommandTimeouts to 0 for all of the purge commands and the re-populate commands) environment is VS2005 on my PC, SQL2005 SP2 on server have searched Google for this error - and whilst there are many entries, not many answers... thx mark
View Replies !
View Related
Error: The Connection Manager Failed To Defect From The Transaction.
Does anybody know what it means? The context is: a package with a single Data Flow finishes with this error: [Connection manager "xxx"] Error: The connection manager failed to defect from the transaction. All components inside the data flow reports a successfull green status, however the DataFlow Task remains yellow for a long time, when suddenly the package stops with the above message. Another information is that the table remains locked during package execution (a select on that table does not complete...). This is a serious issue, and I couldnt find any relevant information about that. Thanks in advance.
View Replies !
View Related
SSIS Error - Transaction Context In Use By Another Session
All I'm developing a package in SSIS reading data from two databases on a SQL 2000 server and moving the data (with some transformation) to a SQL 2005 server. I am executing the package on the 2005 box. The package must employ transactions and having configured MSDTC on both servers I still seem to get the abovementioned error when setting the TransactionOption value to required for the control. I do the following inside a Data-Flow-Task: Create and OLE DB Source connection that points to a connection manager configured against databaseA on the SQL 2000 server. The following SQL example applies: Select col1, col2...coln from databaseA.dbo.table1 Create and OLE DB Source connection that points to a connection manager configured against databaseB on the SQL 2000 server. The following SQL example applies: Select col1, col2...coln from databaseA.dbo.table1 Both of the OLE DB Source outputs are directed through a Union Transformation (since the structure of databaseA and databaseB are identical - only the data in each database is different). The output of the union is directed to a Multicast Transformation. The multicast directs it's output to two seperate OLE DB destinations. Destination1 - SQL Server 2000 table is populated with multicast output stream 1. Destination2 - SQL Server 2005 table is populated with multicast output stream 2. Both of the destinations above have their own connection managers. When I execute the data-flow-task I get a clutch of errors as follows. If I simply set the TransactionOption to 'NotSupported' or 'Supported' instead of 'Required', this task executes successfully. Also, if I split the task into two seperate data-flow tasks (ie: select from databaseA and write Destination1 in one data flow and select from databaseB and write to Destination2 in another data flow - the package will succeed). I have done many searches on MSDN/Technet/Google etc. to find a solution here. The bottom line is, I need to employ a transaction in this package and haven't been ab;e to get it working despite haviung broken the package down to bare bones and creating a dummy environment Error: 0xC0202009 at Insert Unprocessed Keys From DatabaseA & DatabaseB, Write Keys - SQL_DEST_2000 [104]: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E14 Description: "Transaction context in use by another session.". Error: 0xC0202009 at Insert Unprocessed Keys From DatabaseA & DatabaseB, Write Keys - SQL_DEST_2000 [104]: An OLE DB error has occurred. Error code: 0x80040E37. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E37 Description: "Transaction context in use by another session.". Error: 0xC004701A at Insert Unprocessed Keys From DatabaseA & DatabaseB, DTS.Pipeline: component "Write Keys - SOURCE" (104) failed the pre-execute phase and returned error code 0xC0202040. Thanks in advance David
View Replies !
View Related
SSIS Package Failing During Bulk Load - Without Useful Error Code
I have a dataflow step (flat file -> Sql Server Destination), with a batch size of 2500 records. It fails consistently around 3.6 million records in, with only this error - [SQL Server Destination [4076]] Error: Unable to prepare the SSIS bulk insert for data insertion. [DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SQL Server Destination" (4076) failed with error code 0xC0202071. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. [DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202071. There may be error messages posted before this with more information on why the thread has exited. [Flat File Source [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020. [DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled. [DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure. [DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited. [DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited. How can I debug this further to see what's going wrong?
View Replies !
View Related
Error On Executing SSIS Packages On A Remote Machine Using Code
Hello all, I am trying to execute the ssis packages using code.These packages are hosted on remote server under MSDB in local Network. Below is the code tried to Execute -------------------------------------------------- DTSExecResult execRslt = _dtsxPackage.Execute(); foreach (DtsError dtserr in _dtsxPackage.Errors) { Console.WriteLine("Source: " + dtserr.Source + ", Description: " + dtserr.Description); } I get hte following Error -------------------------------- "Dupaco Load MMAs"-------------"An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.". " "Data Flow Task" -------"The AcquireConnection method call to the connection manager "Dupaco" failed with error code 0xC0202009. " "Data Flow Task" ----------"component "OLE DB Destination" (119) failed validation and returned error code 0xC020801C. " "One or more component failed validation. " "There were errors during task validation. " When i try to execute the same code on the server where all the package are hosted. It is working fine. More Info: In thepackage we are using one "Source Flat file connection" and one "Oledb Destination connection" Please help me to solve this problem, as my client needs it very badly Thanks Subin
View Replies !
View Related
Help! AcquireConnection Method Call To The Connection Manager Failed With Error Code 0xC0202009
The package runs fine if I run it by itself. Unfortunately we want to call it from another package and when we do so it fails everytime with the following error; "AcquireConnection method call to the connection manager "BPCSF" failed with error code 0xC0202009." This package is calling an AS400 and pulling data from it into a staging environment. The task that is failing is 4th task on the list and is the 3rd task to call the AS400 environment. If I need to provide more information I would be happy to do so. Any help would be greatly appreciated. Thanks! -Krusty
View Replies !
View Related
(Project Real Implementation) Error Code: 0x80004005 OLEDB Connection To SQL Server
Hi List Im trying to set up an implementation of Project Real --it works like this- Create two system environment variables called REAL_Root_Dir and REAL_Configuration with the values given below. Click on Start -> Control Panel -> System. Go to the Advanced Panel, click Environment Variables button, then New in the System variables box. If the Project REAL files were installed at C:Microsoft Project REAL, then the variable values will be: Variable Name: REAL_Root_Dir Variable Value: C:Microsoft Project REALETL Variable Name: REAL_Configuration Variable Value: %REAL_Root_Dir%REAL_Config.dtsconfig The package OLEDB connections work like this First read enviroment variable to get location of config file Next read Config File to get connection string for Config Database <?xml version="1.0"?> <DTSConfiguration> <Configuration ConfiguredType="Property" Path="Package.Connections[SQL - Configuration].Properties[ConnectionString]" ValueType="String"> <ConfiguredValue>Data Source=(local);Initial Catalog=DataWarehouseABC;Provider=SQLNCLI.1;Integrated Security=SSPI;</ConfiguredValue> </Configuration> </DTSConfiguration> Next read Config database to get connection strings for Source and Destination databases Destination database is called "DataWarehouseABC" Source database is called "SnapshotABC" the Source database OLEDB connection works 100% however the destination OLDB connection we get this error below PS--Both source and destination databases are on the same development machine , however both databases are restored bak files from another production machine Error 1 Error loading LoadGroup_Daily.dtsx: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login failed for user 'xxxxxx'.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot open database "DataWarehouseABC" requested by the login. The login failed.". Any ideas on how one OLEDB Connection in this package can get this corruption thanks in advance Dave
View Replies !
View Related
SSIS Execution Error While Choosing Transaction As Required
Hi, I have created a few packages and i want to execute this in a sequence so I created a wrapper/parent package and added all the other packages as child Package using the Execute Package Task. These packages are file system based packages. I am executing the wrapper/parent package from a web page which will execute all the child packages. All is well and works fine when I choose the TransactionOption as "Supported" in my wrapper/parent package but when I choose the TransactionOption as "Required" in my wrapper/parent package I get the following error Error Occurred: The package is failed due to following: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D024 "The transaction manager has disabled its support for remote/network transactions.". What I am doing is connecting to 3 DB in the same server and doing some data manipulation. The MSDTC is running in the Target SQL Server and also the DTC Server in my Local is started and running. What else could be the problem. Thanks in advance for any and all help
View Replies !
View Related
|
TRACKER
