Security Error When Execute Sp From An Application, But Not From SQL Management Studio.
Hello,
I am facing a very odd behavior with SQL server 2005.
I have a database role with specific permissions to execute only some of the stored procedures in the database. I also have a SQL login/user attached to the role.
If I execute one of the stored procedures from the application (web application, with Microsoft enterprise library database block) I am getting a security error stating that I need select permission for the schema.
However, If I execute the same sp with the same parameters from SQL management studio, connecting with the same SQL login as in the application I can execute the sp without any security errors. The SQL management studio is in on a different server than the targeted database.
Are there any differences between executing stored procedures from SQL MS and from application when using the same SQL login?
Thanks,
IT
View Complete Forum Thread with Replies
Related Forum Messages:
User Token Is Different When SP Is Executed In Management Studio Vs Application
Hello, I have a stored procedure that outputs login token and user token information. The stored procedure has WITH EXECUTE AS CALLER specified. When I execute the stored procedure from Management Studio I get the following output from the stored procedure <login_token pid="267" sid="AQUAAAAAAAUVAAAAdbl1VI3r6l4jX2Nr0AYAAA==" name="MYDOMAINjoe" type="WINDOWS LOGIN" /> <login_token pid="2" sid="Ag==" name="public" type="SERVER ROLE" /> <login_token pid="3" sid="Aw==" name="sysadmin" type="SERVER ROLE" /> <login_token pid="257" sid="AQIAAAAAAAUgAAAAIAIAAA==" name="BUILTINAdministrators" type="WINDOWS GROUP" /> ... (more groups) <user_token pid="7" sid="AQUAAAAAAAUVAAAAdbl1VI3r6l4jX2Nr0AYAAA==" name="MYDOMAINjoe" type="WINDOWS LOGIN" /> <user_token pid="0" name="public" type="ROLE" /> <user_token pid="5" sid="AQUAAAAAAAUVAAAAdbl1VI3r6l4jX2NrCAUAAA==" name="MYDOMAINPeople" type="WINDOWS GROUP" /> <user_token pid="16" name="approleDirector" type="ROLE" /> <user_token pid="16384" name="db_owner" type="ROLE" /> When I execute the stored procedure through my application (IIS application connecting to SQLServer 2005 through SQL Native Client - not .NET) I get the following <login_token pid="267" sid="AQUAAAAAAAUVAAAAdbl1VI3r6l4jX2Nr0AYAAA==" name="MYDOMAINjoe" type="WINDOWS LOGIN" /> <login_token pid="2" sid="Ag==" name="public" type="SERVER ROLE" /> <login_token pid="3" sid="Aw==" name="sysadmin" type="SERVER ROLE" /> <login_token pid="257" sid="AQIAAAAAAAUgAAAAIAIAAA==" name="BUILTINAdministrators" type="WINDOWS GROUP" /> ... (more groups) <user_token pid="1" sid="AQUAAAAAAAUVAAAAdbl1VI3r6l4jX2Nr4QQAAA==" name="dbo" type="WINDOWS LOGIN" /> The login token is the same but the user token is dbo instead of the actual user. What am I doing wrong? Thanks.
View Replies !
Different Results When Running Procedure From Management Studio Vs Application Code
I'm updating a process that recreates a large table every night. The table is the result of a bunch of nightly batch processes and holds a couple million records. In the past, each night at the end of the batch jobs the table would be dropped and re-created with the new data. This process was embodied in dynamic sql statements from an MFC C++ program, and my task is to move it to a SQL Server 2000 stored procedure that will be called from a .Net app. Here's the relevant code from my procedure: sql Code: Original - sql Code -- recreate new empty BatchTable table print 'Dropping old BatchTable table...' exec DropBatchTable --stored procedure called from old code that does a little extra work when dropping the table -- validate drop If exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BatchTable]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) Begin RAISERROR( 'Unable to drop old BatchTable!',0,1) WITH NOWAIT End Else Begin print 'Old BatchTable dropped.' End print 'Creating new BatchTable...' SELECT TOP 0 *, cast('' as char(3)) as Client, cast('' as char(12)) as ClientDB INTO dbo.BatchTable FROM differentDB.dbo.BatchArchives --validate create If Not exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BatchTable]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) Begin RAISERROR( 'Unable to create new BatchTable!',0,1) WITH NOWAIT End Else Begin print 'New BatchTable Created.' End -- recreate new empty BatchTable table print 'Dropping old BatchTable table...' exec DropBatchTable --stored procedure called from old code that does a little extra work when dropping the table -- validate drop IF EXISTS (SELECT * FROM dbo.sysobjects WHERE id = object_id(N'[dbo].[BatchTable]') AND OBJECTPROPERTY(id, N'IsUserTable') = 1) BEGIN RAISERROR( 'Unable to drop old BatchTable!',0,1) WITH NOWAIT END ELSE BEGIN print 'Old BatchTable dropped.' END print 'Creating new BatchTable...' SELECT TOP 0 *, CAST('' AS CHAR(3)) AS Client, CAST('' AS CHAR(12)) AS ClientDB INTO dbo.BatchTable FROM differentDB.dbo.BatchArchives --validate create IF NOT EXISTS (SELECT * FROM dbo.sysobjects WHERE id = object_id(N'[dbo].[BatchTable]') AND OBJECTPROPERTY(id, N'IsUserTable') = 1) BEGIN RAISERROR( 'Unable to create new BatchTable!',0,1) WITH NOWAIT END ELSE BEGIN print 'New BatchTable Created.' END The print statements are there because the .net app will read them in and then write them to a log file. Some of the other mechanics are there to mimic the old process. The idea is to duplicate the old process first and then work on other improvements. This works in Management studio. The .Net App reports that the old table was dropped, but when it tries to create the new table it complains that "There is already an object named 'BatchTable' in the database." I have verified that the old table is removed. Any ideas on how to fix this?
View Replies !
What Is The Security Setting To Allow Editing Of Stored Procedures From Management Studio?
Greetings Running SQL Server 2005. The developers on the project can see and edit stored procedures from within the Visual Studio IDE (via Server Explorer) but when they connect through management studio, the stored procedures do not show up at all. Is there a seperate security setting specifically for management studio? The user has: The dbCreator Server Role Is mapped to the development database as dbo with datareader/datawriter/db owner/public role Is mapped to master reader/writer/public Is mapped to model reader/writer public Is mapped to msdb reader/writer public Is mapped to tempdb reader/writer publuc This is probably more security than the user needs, but was grasping at straws to let them edit stored procedures...
View Replies !
I Need Some Simple Security (for SQL Server Management Studio) In A Group Of Programmers.
Hi, I'm working in a web project. In our lab, all the PCs are installed with SQL Server Management Studio, and the codes of the site are left by the previous batch of programmers. Here is briefly how our web works, the web will call the sql server providing a username (userA) and password (aaaaaa) to log into the database, then the web can connect to the database to do various functions like select, insert, update and delete. Currently anyone can go to thier SQL Server Management Studio on thier PC to edit various things like names and columns of tables by logging in as userA. But, we now only want a small number of users to have the ability to change things in the database. What are some ways we can do that? Something that I've thought of is that only allow userA to log in and do functions like select, insert, update and delete and do not have the ability to edit things like names and columns of tables. Have a userB with password only known to me that can have full control of the database which I have done.
View Replies !
Security Rights Needed To Start And Stop Services From SQL Server Management Studio
Hello everyone. I have a question about granting enough rights to allow a non admin user to start and stop a sql server service via the SQL Server Management Studio by right clicking on the server node. I have changed the acl's of the SQL Server service security and gave the user rights to start and stop the service. This does allow them to connect remotly to the server using computer manager and they successifully start and stop the service. But, in SQL Server Management Studio the option still does not show up, unless he is a admin of the server. Does anyone know what other security settings I need to address for the start and stop to show up when I right click on the server node? Thanks for any help
View Replies !
Can't Access Reporting Services In Management Studio Or Web Interface Using Windows Integrated Security
I know from searching this forum that there have been many variations of the issue I'm currently suffering, but I haven't found anything quite like mine or a solution to solve it. The issue I'm running into is that I am unable to log on to Reporting Services using Management Studio or the web interface when Windows Integrated Security is enabled. I have full functionality using basic security, but the risks involved make it impossible to deploy basic authentication out into production. The error I'm receiving in Management Studio is The request failed with HTTP status 401: Unauthorized. (Microsoft.SqlServer.Management.UI.RSClient). I recieve the same error when I try the web interface. I've looked the most recent logfile in WindowsSystem32LogFilesW3SVC1 and these entries match up to the time I attempted my authentication. Code Snippet 2008-05-12 20:30:42 <Edited: Server IP> GET /reports - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254 2008-05-12 20:30:42 <Edited: Server IP> GET /reports - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 301 0 0 2008-05-12 20:30:42 <Edited: Server IP> GET /reports/ - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254 2008-05-12 20:30:46 <Edited: Server IP> GET /reports/home.aspx - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 302 0 0 2008-05-12 20:30:46 <Edited: Server IP> GET /reports/Pages/Folder.aspx - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254 2008-05-12 20:30:47 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 2 2148074254 2008-05-12 20:30:47 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 0 2008-05-12 20:30:47 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 2148074248 2008-05-12 20:30:49 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 2 2148074254 2008-05-12 20:30:49 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 0 2008-05-12 20:30:49 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 2148074248 2008-05-12 20:30:50 <Edited: Server IP> GET /reports/Pages/Folder.aspx - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 500 0 0 2008-05-12 20:30:50 <Edited: Server IP> GET /Reports/js/ReportingServices.js - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254 2008-05-12 20:30:50 <Edited: Server IP> GET /Reports/js/ReportingServices.js - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0 2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/styles/ReportingServices.css - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254 2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/blank.gif - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254 2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/blank.gif - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0 2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/48error.jpg - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254 2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/styles/ReportingServices.css - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0 2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/48error.jpg - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0 2008-05-12 20:31:07 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254 2008-05-12 20:31:07 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 1 0 2008-05-12 20:31:13 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254 2008-05-12 20:31:13 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 1 0 I tried to highlight one of each of the HTTP errors I am getting. 401.2 and 401.1 are the ones I kind of expected, but have no idea why I'm getting them. The 500 0 error is a bit troubling, because unless I'm mistaken thats a server side error. Here's my current setup. As far as I can tell, I've done everything to set up correctly for Windows Integerated security. My Specs The server machine running all SQL 2005 services. It resides in a domain. All Clients are in the same domain. Intel Dual Processor 3.20 gig Xenon Windows Server 2003 w/ SP2 Microsoft Sql Server 2005 w/ SP2 Reporting Services Setup The virtual directories Reports and ReportServer are set to Windows Integrated Security with Anonymous Access disabled. All other checkboxes in Directory Security are unchecked. For permissions in Reports, I have: Administrators (servernameAdministrators) - Full Control ASP.NET Machine Account - Modify, Read & Execute, List Folder Contents, Read, Write Authenticated Users - Modify, Read & Execute, List Folder Contents, Read, Write Creator Owner - No permissions Domain Users - Read & Execute, List Folder Contents, Read SQLServer2005ReportingServices]WebServiceUsers$... - Read & Execute, List Folder Contents, Read SQLServer2005ReportServerUsers$... - Read & Execute, List Folder Contents, Read SYSTEM - Full Control Users (CompNameUsers) - Read & Execute, List Folder Contents, Read In ReportServer I have the same permissions except Authenticated Users is absent. At one point, I even added the account Everybody and gave it full control, and I still recieved a HTTP 401 error. Any help at what I might be missing would be a godsend. Thanks.
View Replies !
T-SQL And Visual Basic 2005 Codes That Execute A User-Defined Stored Procedure In Management Studio Express (Part 2)
Hi Jonathan Kehayias, Thanks for your valuable response. I had a hard time to sumbit my reply in that original thread yesterday. So I created this new thread. Here is my response to the last code/instruction you gave me: I corrected a small mistake (on Integrated Security-SSPI and executed the last code you gave me. I got the following debug error message: 1) A Box appeared and said: String or binary data would be truncated. The statement has been terminated. |OK| 2) After I clicked on the |OK| button, the following message appeared: This "SqlException was unhandled String or binary data would be truncated. The statement has been terminated." is pointing to the "Throw" code statement in the middle of ....................................... Catch ex As Exception MessageBox.Show(ex.Message) Throw Finally .......... Please help and advise how to correct this problem in my project that is executed in my VB 2005 Express-SQL Server Management Studio Express PC. Thanks, Scott Chang The code of my Form1.vb is listed below: Imports System.Data Imports System.Data.SqlClient Imports System.Data.SqlTypes Public Class Form1 Public Sub InsertNewFriend() Dim connectionString As String = "Data Source=.SQLEXPRESS;Initial Catalog=shcDB;Integrated Security=SSPI;" Dim connection As SqlConnection = New SqlConnection(connectionString) Try connection.Open() Dim command As SqlCommand = New SqlCommand("sp_insertNewRecord", connection) command.CommandType = CommandType.StoredProcedure command.Parameters.Add("@procPersonID", SqlDbType.Int).Value = 7 command.Parameters.Add("@procFirstName", SqlDbType.NVarChar).Value = "Craig" command.Parameters.Add("@procLastName", SqlDbType.NVarChar).Value = "Utley" command.Parameters.Add("@procAddress", SqlDbType.NVarChar).Value = "5577 Baltimore Ave" command.Parameters.Add("@procCity", SqlDbType.NVarChar).Value = "Ellicott City" command.Parameters.Add("@procState", SqlDbType.NVarChar).Value = "MD" command.Parameters.Add("@procZipCode", SqlDbType.NVarChar).Value = "21045" command.Parameters.Add("@procEmail", SqlDbType.NVarChar).Value = "CraigUtley@yahoo.com" Dim resulting As String = command.ExecuteNonQuery MessageBox.Show("Row inserted: " + resulting) Catch ex As Exception MessageBox.Show(ex.Message) Throw Finally connection.Close() End Try End Sub Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load InsertNewFriend() End Sub End Class
View Replies !
T-SQL And Visual Basic 2005 Codes That Execute A User-Defined Stored Procedure In Management Studio:How To Declare EXEC && Sp?
Hi all, In my SQL Server Management Studio Express (SSMSE), I executed the following sql code suuccessfully: --insertNewRocord.sql-- USE shcDB GO CREATE PROC sp_insertNewRecord @procPersonID int, @procFirstName nvarchar(20), @procLastName nvarchar(20), @procAddress nvarchar(50), @procCity nvarchar(20), @procState nvarchar(20), @procZipCode nvarchar(20), @procEmail nvarchar(50) AS INSERT INTO MyFriends VALUES (@procPersonID, @procFirstName, @procLastName, @procAddress, @procCity, @procState, @procZipCode, @procEmail) GO EXEC sp_insertNewRecord 7, 'Peter', 'Wang', '678 Old St', 'Detroit', 'Michigon', '67899', 'PeterWang@yahoo.com' GO ======================================================================= Now, I want to insert a new record into the dbo.Friends table of my shcDB by executing the following T-SQL and Visual Basic 2005 codes that are programmed in a VB2005 Express project "CallshcDBspWithAdoNet": --Form1.vb-- Imports System.Data Imports System.Data.SqlClient Imports System.Data.SqlTypes Public Class Form1 Public Sub InsertNewFriend() Dim connectionString As String = "Integrated Security-SSPI;Persist Security Info=False;" + _ "Initial Catalog=shcDB;Data Source=.SQLEXPRESS" Dim connection As SqlConnection = New SqlConnection(connectionString) connection.Open() Try Dim command As SqlCommand = New SqlCommand("sp_InsertNewRecord", connection) command.CommandType = CommandType.StoredProcedure EXEC sp_insertNewRecord 6, 'Craig', 'Utley', '5577 Baltimore Ave', 'Ellicott City', 'MD', '21045', 'CraigUtley@yahoo.com' Console.WriteLine("Row inserted: " + _ command.ExecuteNonQuery().ToString) Catch ex As Exception Console.WriteLine(ex.Message) Throw Finally connection.Close() End Try End Sub End Class =========================================================== I ran the above project in VB 2005 Express and I got the following 5 errors: 1. Name 'EXEC' is not declared (in Line 16 of Form1.vb) 2. Method arguments must be enclosed in parentheses (in Line 16 of Form1.vb) 3. Name 'sd-insertNewRecord' is not declared. (in Line 16 of Form1.vb) 4.Comma, ')', or a valid expression continuation expected (in Line 16 of Form1.vb) 5. Expression expected (in Line 16 of Form1.vb) ============================================================ I know that "EXEC sp_insertNewRecord 6, 'Craig', 'Utley', '5577 Baltimore Ave', 'Ellicott City', 'MD', '21045', 'CraigUtley@yahoo.com' "in Line 16 of Form1.vb is grossly in error. But I am new in doing the programming of T-SQL in VB 2005 Express and I am not able to change it. Please help and advise me how to correct these problems. Thanks in advance, Scott Chang
View Replies !
Ent Mgr. Management-CurrentActivity-Application - Error?
I'm having a problem with couple of users on our network not connecting to SQL exactly right. In the CurrentActivity window under the application column these users are not showing the authenticated usernames. Example: it should be username@computername but all that shows is @computername. These users get weird security problems that I have not been able to resolve. Our network admin is looking into it but he's not sure why these users should be any different than the rest. Any suggestions?
View Replies !
Management Studio Error
When executing export data task and through the wizard to include column names within a flat file desitination and get the following error listed below. If you uncheck the box and don't include the column names it works correctly. Error - Pre-execute (Error) Messages Information 0x402090dc: Data Flow Task: The processing of file "C:Documents and Settings*Desktop est_2.txt" has started. (SQL Server Import and Export Wizard) Error 0xc0202095: Data Flow Task: Failed to write out column name for column "ClientSubGroupID". (SQL Server Import and Export Wizard) Error 0xc004701a: Data Flow Task: component "Destination - test_2_txt" (22) failed the pre-execute phase and returned error code 0xC0202095. (SQL Server Import and Export Wizard)
View Replies !
Error Connecting In Management Studio
Hello, I am having problems connecting to my SQL Server instance with Management Studio; basically the setup is as follows; *Single server running windows 2003 enterprise - in a workgroup not domain *SQL Server is installed on this machine *When I try and connect from the same machine using its own IP address and Windows authentication I get the 18452 error "login failed for {NULL} user" I am testing it like this because Sharepoint is failing in configuration wizard because it is connecting the same way - at least the login failure audit logs say the same. Many thanks for answers
View Replies !
Error When Trying To Start Management Studio
Hello Guys, I am getting the following error when I try to start SQL 2005 Management Studio to manage my SQL Server : Cannot load the DLL xpstar.dll, or one of the DLLs it references. Reason: 126(The specified module could not be found.). Any ideas ? Thanks,
View Replies !
Installation Error On Management Studio Express
Hi, I'm still getting error 2908 while installing the SQL Server Management Studio Express. The file downloads, I run it and it goes through the setup wizard. It gets almost all the way through the installation and then gets this error. The complete message is 'The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2908. The install then rolls back. Any suggestions? Product: Microsoft SQL Server Management Studio Express -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2908. The arguments are: {2AC4F9E9-0BFA-4CAC-BA2E-D089C63637F5}, , Product: Microsoft SQL Server Management Studio Express -- Error 1935. An error occurred during the installation of assembly 'Microsoft.ReportViewer.WebForms,Version="8.0.0.0",Culture="neutral",PublicKeyToken="b03f5f7f11d50a3a",FileVersion="8.0.50727.42",ProcessorArchitecture="MSIL"'. Please refer to Help and Support for more information. HRESULT: 0x8002802F. assembly interface: , function: CreateAssemblyNameObject, component: {B68B643F-A989-4510-9D98-0B2385E85ADF}
View Replies !
Installation Error On Management Studio Express
Hi, I'm getting error 2908 while installing the SQL Server Management Studio Express. The file downloads, I run it and it goes through the setup wizard. It gets almost all the way through the installation and then gets this error. The complete message is 'The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2908. The install then rolls back. Any suggestions? Here's the errors that are getting generated in the application log Product: Microsoft SQL Server Management Studio Express -- Error 1935. An error occurred during the installation of assembly 'Microsoft.ReportViewer.WebForms,Version="8.0.0.0",Culture="neutral",PublicKeyToken="b03f5f7f11d50a3a",FileVersion="8.0.50727.42",ProcessorArchitecture="MSIL"'. Please refer to Help and Support for more information. HRESULT: 0x8002802F. assembly interface: , function: CreateAssemblyNameObject, component: {B68B643F-A989-4510-9D98-0B2385E85ADF} Product: Microsoft SQL Server Management Studio Express -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2908. The arguments are: {2AC4F9E9-0BFA-4CAC-BA2E-D089C63637F5}, ,
View Replies !
Error Connecting To Express Using Sql Management Studio
Hi, The issue, I have had SQL express installed and working ok, however, I can no longer connect OS: XP sp2.0 .net installed ver1.1 .. 2.0 sp1, 3.0sp1 and 3.5 The install of SQL was using the SQLEXR_adv download I have removed SQL and all associated applications folders and windows SQL services I have re-installed many times but always receive the same issue. I re-built the .net 2.0 The issue I have is when I try and connect form my applications or with Express sql management studio I receive the following error: It looks like a .net2.0 issue TITLE: Connect to Server ------------------------------ Cannot connect to RNASHLTOPSQLEXPRESS. ------------------------------ ADDITIONAL INFORMATION: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. (System.Data) ------------------------------ The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception. (System.Data) ------------------------------ The type initializer for 'System.Data.SqlClient.SqlPerformanceCounters' threw an exception. (System.Data) ------------------------------ Configuration system failed to initialize (System.Configuration) ------------------------------ Unrecognized configuration section system.serviceModel. (C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config line 136) (System.Configuration) ------------------------------ BUTTONS: OK ------------------------------
View Replies !
SQL Server Management Studio Express Error
I'm trying to run the disk usage reports from the SQL Server Management Studio and I'm getting an error. I right-click on a database, go to Reports, then Standard Reports and select Disk Usage by Table. I get the error below. Can anyone help? =================================== Object reference not set to an instance of an object. (System.Xml) ------------------------------ Program Location: at System.Xml.XmlReader.CalcBufferSize(Stream input) at System.Xml.XmlTextReaderImpl.InitStreamInput(Uri baseUri, String baseUriStr, Stream stream, Byte[] bytes, Int32 byteCount, Encoding encoding) at System.Xml.XmlTextReaderImpl..ctor(String url, Stream input, XmlNameTable nt) at System.Xml.XmlDocument.Load(Stream inStream) at Microsoft.SqlServer.Management.Reports.StandardReport.LoadRdlDocument() at Microsoft.SqlServer.Management.Reports.Report.LoadReportQueriesFromRdl() at Microsoft.SqlServer.Management.Reports.StandardReportFactory.GetReport(ReportInfo reportInfo, ReportContext context) at Microsoft.SqlServer.Management.Reports.ReportsManager.GetReport(ReportInfo reportInfo, ReportContext context) at Microsoft.SqlServer.Management.Reports.ReportsManager.ShowReport(ReportInfo reportInfo)
View Replies !
Get Timeout Error With TableAdapter But Not With SQL Server Management Studio
I have found a similar problem in Google but that thread doesn't have any conclusion. So that I wish a new thread can help solve this problem ultimately.http://forums.asp.net/rss.aspx?ForumID=54&PostID=1600414Problem description:TableAdapter will raise timeout exception when I try to execute a SQL containing subquery and grouping. However, if the same SQL is executed in SQL Server Management Studio. The response time is always less than 1 second.Solution provided in previous link:Increase the timeout setting of the command - I think this is not the solution. As the default timeout should be 15 seconds, how could it get a timeout error if it execute a SQL supposed to be finished within a second?I have encountered similar problem before. However, I can't remember the exact detail. My solution for that moment seems to be using join instead of subquery in the SQL. Unluckily, this trick does not work this time.Please provide any other suggestion. Thanks in advance.
View Replies !
Management Studio Error On Program/object Load...
I've just installed .NET 2.0, VS 2005, and SQL 2005 Developer (Win XP SP2). When launching Management Studio I'm receving the following error. Any insight would be greatly appreciated.It may also be important to note that I also have VS 2003 and SQL 2000 Developer on this machine as well, not sure if it matters or not.=================================== Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.VisualStudio.OLE.Interop.IServiceProvider'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{6D5140C1-7436-11CE-8034-00AA006009FA}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)). (Microsoft.VisualStudio.OLE.Interop) ------------------------------Program Location: at Microsoft.VisualStudio.OLE.Interop.IServiceProvider.QueryService(Guid& guidService, Guid& riid, IntPtr& ppvObject) at Microsoft.SqlServer.Management.UI.VSIntegration.ServiceProvider.GetService(Guid guid, Type serviceType) at Microsoft.SqlServer.Management.UI.VSIntegration.ServiceProvider.GetService(Type serviceType) at Microsoft.SqlServer.Management.UI.VSIntegration.ShellWindowPaneUserControl.GetService(Type svcClass) at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.System.IServiceProvider.GetService(Type serviceType) at System.ComponentModel.Design.ServiceContainer.GetService(Type serviceType) at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.GetService(Type serviceType) at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NodeContext.GetService(Type serviceType) at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItemWithQuery(IList nodes, INodeInformation source, INavigableItem sourceItem, String urnQuery, Boolean registerBuilder, Boolean registerBuiltItems) at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItem(IList nodes, INodeInformation source, INavigableItem sourceItem, IFilterProvider filter) at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.Build(INodeInformation source, INavigableItem sourceItem, IFilterProvider filter) at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.GetChildren() at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.BuildChildren()
View Replies !
Error Running SSIS Package From Management Studio
Hi I created SSIS Package to transfer tables from one sql2005 DB to another sql2005 DB. When I execute the package from the BIDS it execute succesfully. However, when I import the package (file system) to the management studio - msdb - stored packages and run the package from there (right click: Run Package) I get this error: the validate method on the task failed, and returned error code. the validate method must succeed and indicate the result using an out parameter. what is the reason for this error? I aprriciate your help. SeoAndSo.com
View Replies !
Error Importing SSIS Packages On SQL Management Studio
I encounter this error when importing SSIS packages using SQL Server Management Studio: =================================== Unable to cast object of type 'Microsoft.SqlServer.Dts.ObjectExplorerUI.ImportPackageAsAction' to type 'Microsoft.SqlServer.Dts.ObjectExplorerUI.ISimpleAction'. (Microsoft.SqlServer.DtsObjectExplorerUI) ------------------------------ Program Location: at Microsoft.SqlServer.Dts.ObjectExplorerUI.DtsServerMenuItem.Invoke(INodeInformation parent, String mode, String assembly, String type) The Integration Services that I'm using has just been rebuilt due to problems after installing SP2. I'm using Integration Services 9.0.3042. I can't find anything having this same problem. Any help will be appreciated. Thanks!
View Replies !
Error Trying To Connect To Reporting Services Using SQL Management Studio
Hi. I have some strange error trying to connect to Reporting Services. At the beginning I was suspecting some accounts issues. But after checking all the accounts under wich ASP.NET, SQL SERVER, Reporting Services are running I don't even know what to think. After searching internet for answers the only similar problems' solutions were remove RS and install it again. Have anybody here had this problem? Can you just fix something without reinstalling RS? The error is: Object reference not set to an instance of an object ------------------------------ Program Location: at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods() at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname) at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection() at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString) at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject() at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci) at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectorThread()
View Replies !
Error Installation SQL Server Management Studio 2005
Could anyone please help me out. I have tried to install the file SQLServer2005_SSMSEE.msi. Everything goes fine untill right at the end I get this error message: An error occured during the installation of assembly 'Microsoft.VisualStudio.VSHelp80,Version="8.0.0.0",Culture="neutral",PublicKeyToken="b03f5f7f11d50a3a", FileVersion="8.0.50727.42". Please refer to Help and Support for more information. HRESULT: 0x80070020. Then the installation is rolled back. Thanks for your help in advance. Paik
View Replies !
Error Installing SQL Server Management Studio Express
Yesterday I successfully installed Microsoft Visual Basic 2005 Express Edition which included SQL Server 2005 Express. Today I noticed I needed to download the Management Studio seperate download. I downloaded SQLServer2005_SSMSEE.msi and executed it and get the following error: Error reading from file C:...SQLServer2005_SSMSEE.msi. Verify that the file exists and that you can access it.. Solved my own problem. Once I moved the msi to C: the installation worked. Apparently the path it was in was too long causing it to be unreadable. c:xxxxxxxxSQLServer2005_SSMSEE.msiSQLServer2005_SSMSEE.msi.
View Replies !
Attach Error In Sql Server Express Management Studio
tried to attach a database in sse-ms, and for some reason the database name is changing to G:someFoldersomeFolderdb.mdf, even tho i dont have a drive g:, during "attach as" screens inside sse-ms, , ie attach>add> then select the database the mdf loction is what it is suppose to be ie C:inetpubwwwrootapp_datachp11wroxunited.mdf but the database name in the same screen shot is G:someOtherFolderAndPathwroxunited.mdf and the attach as is also the G:someOtherFolderAndPathwroxunited.mdf. pretty confused, could use a clue, thanks
View Replies !
'Too Many Characters' Error In Sql String - Working In SQL Management Studio But Not In Code Behind???
Hello i constructed the following query in SQL management studio and it runs fine, exactly how i want it to. However when i run it in my code behind i get the error: 'Too many characters in character literal' I desperatly need to use this query exactly how it displays in the mangement tool - why wont it work the same in my code behind? (I am using c# in my code behind and binding the results of the query to a gridview) Regards "SELECT DISTINCT (dbo.AuthorList(publicationID))+ ';' + ISNULL(' Editor: '+Publication.editor, '')+ '' + ISNULL(' "'+Publication.title+'"', '')+ '' + ISNULL(' Book: "'+Publication.booktitle+'"', '')+ '' + ISNULL(' '+Publication.type, '')+ '' + ISNULL(' '+Publication.journal, '')+ '' + ISNULL(' Series: '+Publication.series+'.', '')+ '' + ISNULL(' '+Publication.school, '')+ '' + ISNULL(' '+Publication.institution, '')+ '' + ISNULL(' '+Publication.organisation, '')+ '' + ISNULL(' '+Publication.month, '')+ '' + ISNULL(' ('+convert(nvarchar, Publication.year)+')', '')+ '' + ISNULL(' '+Publication.publisher, '')+ '' + ISNULL(' '+Publication.address+'.', '')+ '' + ISNULL(' '+Publication.howpublished, '')+ '' + ISNULL(' Ed: '+convert(nvarchar, Publication.edition)+'.', '')+ '' + ISNULL(' '+Publication.note, '')+ '' + ISNULL(' Vol:'+Publication.volume+'.', '')+ '' + ISNULL(' No:'+Publication.number+'.', '')+ '' + ISNULL(' Pages:'+Publication.pages+'.', '')+ '' + ISNULL(' Chapter:'+Publication.chapter+'.', '') AS SingleColumn, Publication.publicationID FROM Publication;"
View Replies !
SSIS Error Message When Trying To Open MSDB In Management Studio
Hi all, I get this error when trying to open folder MSDB in management studio. I'm running Win 2003, SQL server 2005 64 bit on AMD with two instances of SQL. Any one that have a solution ? I havent found any thing that works. If I enable VIA in SQL Server I can't start SQL Service TITLE: Microsoft SQL Server Management Studio ------------------------------ Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: Login timeout expired An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. VIA Provider: The specified module could not be found. (Microsoft SQL Native Client) ------------------------------ Login timeout expired An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. VIA Provider: The specified module could not be found. (Microsoft SQL Native Client)
View Replies !
Cannot Install Workstation Components (Management Studio,etc) (ADD_LOCAL Error)
I have Vista Ultimate (IIS Enabled), SQL Server 2005 Developer Edition (downloaded and ran the SP2 Update), Visual Studio 2008. VS2008 installs no problem. When I install SQL Server 2005, I get an error when it trys to install the last part( Workstation Components, Management Studio, etc). I have tried FULLY, MANUALLY removing all SQL products and registry entries. I have used Windows Installer Cleanup Utility. I have tried Microsoft's recommended way of manually removing SQL Server 2005. If I manually run SqlRun_Tools.msi the error comes up right away. The error is: "A component that you have specified in the ADD_LOCAL property is already installed. To upgrade the existing component, refer to the template.ini and set the UPGRADE property to the name of the component." Here's the Setup Error log: http://toby.pastebin.com/f63405e24 Any help?! Thanks! -Toby
View Replies !
.Net Framework Error Message When Starting SQL 2005 Management Studio
Has anyone ever recieved an error when starting the Management Studio? "Unhandled excpetion has occurred in a component in your application. "Input String was not in a correct format" I click continue and I can still use the manager;however, it gets annoying. The details of the error are very long and too much to add to this thread. Any ideas?
View Replies !
Database Connection Error In SQL Server Management Studio Express
Hello, We are trying to connect the data base in SQL Server Management Studio Express using Operating System Xp. The following error show during the connection time. " Cannot open database "Test" requested by the login. The login failed. Login failed for user 'NT AUTHORITYSYSTEM'. We have the login Id for sa and password. Connect to server it work properly. Could you please give me the steps to resolve the problem. Thanks, Mahesh
View Replies !
Management Studio Disconnects With Error Msg 0, Level 11, State 0, Line 0
I am trying to run the following: select * from sysindexes The operation begins and results are produced but after about 200 results, I get the error - Msg 0, Level 11, State 0, Line 0 - and it disconnects. This is a DB moved (restored) from SQL 2000 to SQL 2005. Any ideas would be appreciated. I am the "make do" DBA and not very good at it yet, I am afraid. Regards, Mike
View Replies !
Error In Microsoft Sql Server Management Studio Trying To Modify Tables Or Columns
I get the error below when trying to modify a table or colum with MSSMS. I can expad out the tree and look at the columns, but I can't change them, view the data in them, or create new ones. __________________________________________________________________________________________________________________________________ TITLE: Microsoft SQL Server Management Studio ------------------------------ Class does not support aggregation (or class object is remote) (Exception from HRESULT: 0x80040110 (CLASS_E_NOAGGREGATION)) (Microsoft.SqlServer.SqlTools.VSIntegration) I resintallelled .NET Framework, recommended from another post. I am using .NET 3.5 BETA Frame work, ans SQL Server 2005 V 9.00.139.00
View Replies !
Reporting Services 2005 And SQL Server Management Studio Connection Error
I have installed multiple instances of SSRS on same server with different database. I can go to the report server URL for both SSRS and run reports. But I cannot connect to the 2nd instance through "SQL Server Management Studio". Also I am getting following error when I try to connect to the "Reporting services configuration" tool from a remote machine Code Block See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.Management.ManagementException: Not found at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.PropertyData.RefreshPropertyInfo() at System.Management.PropertyDataCollection.get_Item(String propertyName) at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName) at System.Management.ManagementBaseObject.get_Item(String propertyName) at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.get_IsSharePointIntegrated() at ReportServicesConfigUI.ConfigurationManager.ResetStepStatus() at ReportServicesConfigUI.ConfigurationManager.ChangeMachine() at ReportServicesConfigUI.ConfigurationManager.LaunchDialog() at ReportServicesConfigUI.ConfigurationManager.OnActivated(EventArgs e) at System.Windows.Forms.Form.set_Active(Boolean value) at System.Windows.Forms.Form.WmActivate(Message& m) at System.Windows.Forms.Form.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINNT/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll ---------------------------------------- RSConfigTool Assembly Version: 9.0.242.0 Win32 Version: 9.00.3042.00 CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/90/Tools/Binn/RSConfigTool.exe ---------------------------------------- System.Windows.Forms Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System.Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- System.Management Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll ---------------------------------------- System.ServiceProcess Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.42 (RTM.050727-4200) CodeBase: file:///C:/WINNT/assembly/GAC_MSIL/System.ServiceProcess/2.0.0.0__b03f5f7f11d50a3a/System.ServiceProcess.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
View Replies !
Error Installing SQL Server Management Studio Express On Windows Vista RC1
Hello NG, After installing SQL Server 2005 Express Edition on Windows Vista RC1, I wanted to install also the Managent Studio but I always receive the following error message: "Bei der Installation dieses Pakets ist ein unerwarteter Fehler aufgetreten. Es liegt eventuell ein das Paket betreffendes Problem vor. Der Fehlercode ist 29506." Where can I find more infos about this error-code? Anybody knows this problem? Thank in advance for every help.
View Replies !
Cannot Connect To SQL Report Server Through Web As Well As Management Studio (Http:503 Error Service Unavailable.)
hi all, i have SQL 2205 with SP1 installed on my machine. and i m not bale to connect to Report Server using SQL management studio as well as from web. i have installed reporting server and database on same machine. i tried using "http://localhost/reportserver" "http://localhost/reports" "http://localhost/reportmanager" but i am not bale to connect i am getting "Service Unavailable" page. and when i try to connect using SQL Management Studio with "servername/instance" as well as "http://localhost/reportserver" i am getting a error saying. =================================== Cannot connect to http://localhost/reportserver.The request failed with HTTP status 503: Service Unavailable. (Microsoft.SqlServer.Management.UI.RSClient) =================================== but if i try and connect to other reporting server on other machine using web http://servername/reportserver i m able to connect it. but dont know whats the problem on my machine. do i need to start any services for this... so anybody knows how to troubleshoot this issue. Thanks in advance...
View Replies !
No Warning Or Error In Mgmt Studio Yet SSIS Execute Task Fails
I have a rather large stored procedure with a ton of update statements wich processes a table with around 25 million records with many varchar fields. When I execute the sproc in Management Studio it generates no errors or warnings. However when I create a SSIS Package and add an execute SQL Task that simply executes the sproc...execution always fails with the following warning: truncates binary or string data What is the quickest way to debug this sproc to determine which specific update statement generates the warning or error? Is SSIS more sensitive than Mgmt studio with regards to warnings? Shouldn't Mgmt studio at least display the warning also? I implanted several insert statements (insert a specific string based on the stage of execution within the sproc into a performance table) in the sproc in an attempt to pinpoint the poor update statement but I've realized that the sproc always runs to completion.
View Replies !
SQL Server Management Studio Express On Vista Home Premium (Error On Attaching And Detaching .mdf)
I have SQL Express 2005 SP2 installed in my Vista Home Premium. I am using SQL Server Management Studio Express to manage .mdf. When I click "Add..." to attach .mdf database, I have this prompt error message : The server principal "My-PCMyName" is not able to access the database "model" under the current security context. (Microsoft SQL Server, Error: 916) I have elevated the rights, "Run as administrator", of my SQL Server Management Studio Express, but still having problem. I also encounter security error when detaching the existing .mdf : The EXECUTE permission was denied on the object 'sp_detach_db', database 'mssqlsystemresource', schema 'sys'. (Microsoft SQL Server, Error: 229) Please advice. Thanks.
View Replies !
SQL Server Management Express Studio Management Tools
I have recently installed the SQL Server Management Studio Express but I do not find Management Tools in order to create scheduled backups and shrinking of the databases. I was under the impression that this should be included in the Management Studio. I use the SQL 2005 Express for smaller customers who run the SQL on a desktop unit. I need a way to backup the data to a server machine for backup purposes. I have uninstalled and reinstalled to no avail.
View Replies !
Visual Studio Database File And SQL Server Management Studio Express Question
I have a database in my "App_Data" folder of my visual studio project. I can view it fine in Visual Studio's built-in tools for managing a database attached to a solution. However i recently started playing around with the SQL Server Management Studio Express program. When i attach my database to Management Studio, and try to run my program it crashes. I think it might be a permissions error?!? When i detatch it and reattach it in visual studio it runs fine again. Any suggestions? ThanksJason
View Replies !
Visual Studio 2005 Standard And SQL Server Management Studio?
I am new to visual studio and I am still not sure of all its components and features. I installed visual studio 2005 standard edition but cannot find SQL Server Management Studio? I guess this must be because it is not included with Visual studio 2005 standard. Is it included with VS 2005 professional? I want to add pictures of products to my shopping site using an SQL database and I’ve been told that SQL Server Management studio is required as it is a graphical tool. How would I go about obtaining the SQL server management studio. There seems to be different versions of SQL server that it is confusing to know which one to purchase. Will the SQL server 2005 version that comes with Visual studio standard be sufficient for me now right? I want to create a shopping site with hundreds, perhaps even thousands of products. I want to use an SQL server 2005 database. The database will include ‘dynamically generated’ product images if that is the correct terminology. My goodness, it seems I still have so much to learn. Thanks
View Replies !
Error Connecting To Remote Server Using Microsoft SQL Server Management Studio Express
Dear All, I am trying to connect to a remote sql server 2005. So I have install the Microsoft SQL Server Management Studio Express. When I try to connect I get the error below. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53). Can some one please help. I have even port no 1533 on my pc. Thanks.
View Replies !
|
TRACKER
