TSQL - Use ORDER BY Statement Without Insertin The Field Name Into The SELECT Statement
Hi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
View Complete Forum Thread with Replies
Related Forum Messages:
TSQL: I Want To Use A SELECT Statement With COUNT(*) AS 'name' And ORDER BY 'name'
I am very new to Transact-SQL programming and don't have a programmingbackground and was hoping that someone could point me in the rightdirection. I have a SELECT statement SELECT FIXID, COUNT(*) AS IOIsand want to ORDER BY 'IOI's'. I have been combing through the BOL, butI don't even know what topic/heading this would fall under.USE INDIISELECT FIXID, COUNT(*) AS IOIsFROM[dbo].[IOI_2005_03_03]GROUP BY FIXIDORDER BY FIXIDI know that it is a simple question, but perhaps someone could assistme.Thanks,
View Replies !
Using Case Statement To Determine Order By Field And Direction (asc Or Desc) When Using Row_number
I am trying to order by the field and direction as provided by input parameters @COLTOSORTBY and @DIR while using a CTE and assigning Row_Number, but am running into syntax errors. Say I have a table called myTable with columns col1,col2,col3, Here's what I'm trying to do with myCTE AS ( Select col1 ,col2 ,col3 ,row_number() over (order by case when(@DIR = 'ASC') then case when @COLTOSORTBY='col1' then col1 asc when @COLTOSORTBY='col2' then col2 asc else col3 asc end else case when @COLTOSORTBY='col1' then col1 desc when @COLTOSORTBY='col2' then col2 desc else col3 desc end end from myTable ) Please let me know what i can do with minimal code repetition and achive my goal of dynamically sorting column and direction. I do not want to use dynamic SQL under any circumstance. Thanks.
View Replies !
Using The ORDER BY Clause When The Ordered Column Is Not Needed In The SELECT Statement
Greetings, I have a C# application that calls a stored procedure to query the database (MSSQL 2005). I only have one field/column returned from the query but I need that column ordered. How do I use the ORDER BY clause without returning the index column which does the sorting? The first example is NOT what I want. I want something that works like the second example which only returns the 'Name' column. ALTER PROCEDURE [dbo].[MyProcedure] AS BEGIN SELECT DISTINCT A.Name, A.index FROM ... ... ORDER BY A.[Index], A.Name ASC END ALTER PROCEDURE [dbo].[MyProcedure] AS BEGIN SELECT DISTINCT A.Name FROM ... ... ORDER BY A.[Index] END Thanks
View Replies !
Order By Clause In DECLARE CURSOR Select Statement Won't Compile
The stored procedure, below, results in this error when I try to compile... Msg 156, Level 15, State 1, Procedure InsertImportedReportData, Line 69 Incorrect syntax near the keyword 'ORDER'. However the select statement itself runs perfectly well as a query, no errors. The T-SQL manual says you can't use the keywords COMPUTE, COMPUTE BY, FOR BROWSE, and INTO in a cursor select statement, but nothing about plain old ORDER BYs. What gives with this? Thanks in advance R. The code: Code Snippet -- ================================================ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO IF object_id('InsertImportedReportData ') IS NOT NULL DROP PROCEDURE InsertImportedReportData GO -- ============================================= -- Author: ----- -- Create date: -- Description: inserts imported records, marking as duplicates if possible -- ============================================= CREATE PROCEDURE InsertImportedReportData -- Add the parameters for the stored procedure here @importedReportID int, @authCode varchar(12) AS BEGIN DECLARE @errmsg VARCHAR(80); -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; --IF (@authCode <> 'TX-TEC') --BEGIN -- SET @errmsg = 'Unsupported reporting format:' + @authCode -- RAISERROR(@errmsg, 11, 1); --END DECLARE srcRecsCursor CURSOR LOCAL FOR (SELECT ImportedRecordID ,ImportedReportID ,AuthorityCode ,[ID] ,[Field1] AS RecordType ,[Field2] AS FormType ,[Field3] AS ItemID ,[Field4] AS EntityCode ,[Field5] AS LastName ,[Field6] AS FirstMiddleNames ,[Field7] AS Title ,[Field8] AS Suffix ,[Field9] AS AddressLine1 ,[Field10] AS AddressLine2 ,[Field11] AS City ,[Field12] AS [State] ,[Field13] AS ZipFull ,[Field14] AS OutOfStatePAC ,[Field15] AS FecID ,[Field16] AS Date ,[Field17] AS Amount ,[Field18] AS [Description] ,[Field19] AS Employer ,[Field20] AS Occupation ,[Field21] AS AttorneyJob ,[Field22] AS SpouseEmployer ,[Field23] As ChildParentEmployer1 ,[Field24] AS ChildParentEmployer2 ,[Field25] AS InKindTravel ,[Field26] AS TravellerLastName ,[Field27] AS TravellerFirstMiddleNames ,[Field28] AS TravellerTitle ,[Field29] AS TravellerSuffix ,[Field30] AS TravelMode ,[Field31] As DptCity ,[Field32] AS DptDate ,[Field33] AS ArvCity ,[Field34] AS ArvDate ,[Field35] AS TravelPurpose ,[Field36] AS TravelRecordBackReference FROM ImportedNativeRecords WHERE ImportedReportID IS NOT NULL AND ReportType IN ('RCPT','PLDG') ORDER BY ImportedRecordID -- this should work but gives syntax error! ); END
View Replies !
The Select Statement Is In A Field
Ok, I inherited this database and there is a field that stopres a selectstatement. Is there anyway possible to execute the value of the fieldwithin a select statement?For example:the table:Name "george"lookupForName "Select orders from Ordertable"So maybe something like select name, execute(lookupforname) as ordersSorry, I didn't design this, just inherited :)george
View Replies !
Select Statement With A New Identity Field
Hello, Is it possible to generate a identityfield dynamically upon select, like this: SELECT tempID AS identity(1,1), username FROM table1 ORDER BY username ASC I want the output to be: 1 - Name12 - Name23 - Name3 The reason for this, is that i want to change the sort order in many diffrent ways, but i need to get the IDs from 1-?? even when the sort order changes. Like: SELECT tempID AS identity(1,1), username FROM table1 ORDER BY username DESC I want the output to be: 1 - Name32 - Name23 - Name1 Patrick
View Replies !
Query To Sum The Same Field Twice In The Select Statement
Hello friends , I have table (MoneyTrans) with following structure [Id] [bigint] NOT NULL, [TransDate] [smalldatetime] NOT NULL, [TransName] [varchar](30) NOT NULL, -- CAN have values 'Deposit' / 'WithDraw' [Amount] [money] NOT NULL I need to write a query to generate following output Trans Date, total deposits, total withdrawls, closing balance i.e. Trans Date, sum(amount) for TransName='Deposit' and Date=TransDate , sum(amount) for TransName=Withdraw and Date=TransDate , Closing balance (Sum of deposit - sum of withdraw for date < = TransDate ) I am working on this for past two days with out getting a right solution. Any help is appreciated Sara
View Replies !
Select Statement Eliminate Field Name
Hi I have tabelA, Which has 10 columns, I need to select 10 column values only no field names. Is there any way I can select only table values not field names. I don't want to see field name in my query result set. Please let me know. I appreciate your help. Thanks Regards -Leong
View Replies !
How Do I Call A Select Statement Properly When The Field Is A Yes/no?
Hello, i am pretty new to asp. I am trying to do a select statement for sending an email to everyone who is not an admin. the code is below, i know it must be fairly simple, yet i do not know how to do it. With the code below, I select everyone. I want to know how to do it properly, similar to the second which does not work. Dim cmd As New OleDbCommand("SELECT Username, Pass, Gender, FirstName, LastName, Email, NickName FROM tblUsers", conn) DOES NOT WORK: Dim cmd As New OleDbCommand("SELECT Username, Pass, Gender, FirstName, LastName, Email, NickName FROM tblUsers WHERE Admin = 'N'", conn) Thanks in advance.
View Replies !
SELECT Statement - How To Not Get Column Field Names?
I do a SELECT * from table command in an ASP page to build a text fileout on our server, but the export is not to allow a field name rows ofrecords. The first thing I get is a row with all the field names. Whydo these come in if they are not part of the table records? How do Ieliminate this from being produced? Here's the ASP code....<html><head><title>Package Tracking Results - Client Feed</title></head><body><%' define variablesdim oConn ' ADO Connectiondim oRSc ' ADO Recordset - Courier tabledim cSQLstr ' SQL string - Courier tabledim oRSn ' ADO Recordset - NAN tabledim nSQLstr ' SQL string - NAN tabledim objFSO ' FSO Connectiondim objTextFile ' Text File' set and define FSO connection and text file object locationSet objFSO = CreateObject("Scripting.FileSystemObject")'Set objTextFile =objFSO.CreateTextFile(Server.MapPath("textfile.txt"))'Response.Write (Server.MapPath("textfile.txt") & "<br />")Set objTextFile = objFSO.OpenTextFile("C: extfile.txt",2)' write text to text file'objTextFile.WriteLine "This text is in the file ""textfile.txt""!"' SQL strings for Courier and NAN tablescSQLstr = "SELECT * FROM Courier"' set and open ADO connection & oRSc recordsetsset oConn=Server.CreateObject("ADODB.connection")oConn.Open "DRIVER={Microsoft Access Driver (*.mdb)};DBQ=" &"c:/Database/QaTracking/QaTracking.mdb" & ";"set oRSc=Server.CreateObject("ADODB.Recordset")oRSc.Open cSQLstr, oConnResponse.ContentType = "text/plain"Dim i, j, tmpIf Not oRSc.EOF ThenFor i = 1 To oRSc.Fields.CountobjTextFile.Write oRSc.Fields(i-1).NameIf i < oRSc.Fields.Count ThenobjTextFile.Write " "End IfNextobjTextFile.WriteLineWhile Not oRSc.EOFFor i = 1 To oRSc.Fields.CountIf oRSc.Fields(i-1) <"" Thentmp = oRSc.Fields(i-1)' If TypeName(tmp) = "String" Then' objTextFile.Write "" &_'Replace(oRSc.Fields(i-1),vbCrLf,"") & ""' ElseobjTextFile.Write oRSc.Fields(i-1)' End IfEnd IfIf i < oRSc.Fields.Count ThenobjTextFile.Write " "End IfNextobjTextFile.WriteLineoRSc.MoveNextWendEnd IfobjTextFile.CloseSet objTextFile = NothingSet objFSO = NothingoRSc.CloseSet oRSc = NothingoConn.CloseSet oConn = Nothing%></body></html>
View Replies !
Select Statement With Run Time Field Selection
I have this SELECT statement. SELECT [issueID], [name] FROM [MyIssue] What I wanted to do is in addition to the above statement, I want to add two run time fields like this: 99 [issueID],'All Issues' [name] So let's say the above select statements generates this list: Summer 2007 Issue Winter 2007 Issue The two addition fields will make the result list like this: 01 Summer 2007 Issue 02 Winter 2007 Issue 99 All Issues How do I accomplish this? Any help is much appreciated.
View Replies !
Convert A Time Field In The Select Statement Of The Query
Hi, I have a field called "Starting DateTime" and I want to convert into my local time. I can convert it in the report with the expression "=System.TimeZone.CurrentTimeZone.ToLocalTime(Fields!Starting_DateTime.Value)", but that is too late. I want to convert it in the Select statement of the query. Can anyone help me please? Thx
View Replies !
Select Statement Within Select Statement Makes My Query Slow....
Hello... im having a problem with my query optimization.... I have a query that looks like this: SELECT * FROM table1 WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998) it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
View Replies !
Multiple Tables Used In Select Statement Makes My Update Statement Not Work?
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View Replies !
Need To Set A Field In A Select Statement Equal To Yes Or No If Record Exists In Separate Table
Hey gang, I've got a query and I'm really not sure how to get what I need. I've got a unix datasource that I've setup a linked server for on my SQL database so I'm using Select * From OpenQuery(DataSource, 'Query') I am able to select all of the records from the first two tables that I need. The problem I'm having is the last step. I need a field in the select statement that is going to be a simple yes or no based off of if a customer number is present in a different table. The table that I need to look into can have up to 99 instances of the customer number. It's a "Note" table that stores a string, the customer number and the sequence number of the note. Obviously I don't want to do a straight join and query because I don't want to get 99 duplicates records in the query I'm already pulling. Here's my current Query this works fine: Select *From OpenQuery(UnixData, 'Select CPAREC.CustomerNo, CPBASC_All.CustorCompName, CPAREC.DateAdded, CPAREC.Terms, CPAREC.CreditLimit, CPAREC.PowerNum From CPAREC Inner Join CPBASC_All on CPAREC.CustomerNo = CPBASC_All.CustomerNo Where DateAdded >= #12/01/07# and DateAdded <= #12/31/07#') What I need to add is one more column to the results of this query that will let me know if the Customer number is found in a "Notes" table. This table has 3 fields CustomerNo, SequenceNo, Note. I don't want to join and select on customer number as the customer number maybe repeated as much as 99 times in the Notes table. I just need to know if a single instance of the customer number was found in that table so I can set a column in my select statement as NotesExist (Yes or No) Any advice would be greatly appreciated.
View Replies !
Using Conditional Statement In Stored Prcodure To Build Select Statement
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View Replies !
In Code Behind, What Is Proper Select Statement Syntax To Retrieve The @BName Field From A Table?
In Code Behind, What is proper select statement syntax to retrieve the @BName field from a table?Using Visual Studio 2003SQL Server DB I created the following parameter:Dim strName As String Dim parameterBName As SqlParameter = New SqlParameter("@BName", SqlDbType.VarChar, 50) parameterBName.Value = strName myCommand.Parameters.Add(parameterBName) I tried the following but get error:Dim strSql As String = "select @BName from Borrower where BName= DOROTHY V FOWLER " error is:Line 1: Incorrect syntax near 'V'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near 'V'. Source Error: Line 59: Line 60: Line 61: myCommand.ExecuteNonQuery() 'Execute the query
View Replies !
How To Write Select Statement Inside CASE Statement ?
Hello friends, I want to use select statement in a CASE inside procedure. can I do it? of yes then how can i do it ? following part of the procedure clears my requirement. SELECT E.EmployeeID, CASE E.EmployeeType WHEN 1 THEN select * from Tbl1 WHEN 2 THEN select * from Tbl2 WHEN 3 THEN select * from Tbl3 END FROM EMPLOYEE E can any one help me in this? please give me a sample query. Thanks and Regards, Kiran Suthar
View Replies !
Help With Delete Statement/converting This Select Statement.
I have 3 tables, with this relation: tblChats.WebsiteID = tblWebsite.ID tblWebsite.AccountID = tblAccount.ID I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement: SELECT * FROM tblChats c LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
View Replies !
Using Select Statement Result In If Statement Please Help
Hello How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement. <% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>" ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)"> <SelectParameters> <asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" /> </SelectParameters> </asp:SqlDataSource>any help would be appreciated
View Replies !
If STATEMENT Within Select Statement Syntax
Hi, I am a newbie to this site and hope someone can help.... I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is: if(TL_flag= '1', "yes") as [Trial Leave] it is coming up with an error.... I can use Select case but I should not need to as this should work? Any ideas?
View Replies !
I Need Help With This Tsql Statement
Every time I try this statement I keep getting a syntext error near count I must be over looking something can some one help me with this. SELECT 'Quarter 1' as 'qtr' count(jobid) as 'transcount', count(distinct job.patientid) as 'patientcount', sum(job.LANGUAGE_TCOST) as 'lcost', Sum(job.LANGUAGE_DISC_COST) as 'dlcost', avg(LANGUAGE_DISC) as 'avgLDisc', (sum(job.LANGUAGE_TCOST) + sum(job.LANGUAGE_DISC_COST)) as 'LGrossAmtBilled', (sum(LANGUAGE_TCOST) / count(distinct job.patientid)) as 'PatAvgL', (sum(LANGUAGE_TCOST) / count(jobid)) as 'RefAvgL', sum(LANGUAGE_DISC) as 'avgPercentDiscL', JOB.JURISDICTION, PAYER.PAY_COMPANY, PAYER.PAY_CITY, PAYER.PAY_STATE, PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE INVOICE_AR.INVOICE_DATE AS EXPR1, INVOICE_AR.AMOUNT_DUE FROM JOB INNER JOIN INVOICE_AR ON JOB.JOBID = INVOICE_AR.JOBID LEFT OUTER JOIN PAYER ON PAYER.PAYERID = JOB.PAYER.ID LEFT OUTER JOIN STATES ON JOB.JURISDICTION = STATES.INITIALS WHERE (INVOICE_AR.AMOUNT_DUE > 0)AND (INVOICE-AR.INVOICE_DATE BETWEEN @startdate and @enddate)AND (MONTH(INVOICE_AR.INVOICE_DATE) IN (1,2,3))AND (PAYER.PAYCOMPANY like '%' + @Company + '%') Group By JOB.JURISDICTION PAYER.PAY_COMPANY PAYER.PAY_CITY PAYER.PAY_STATE PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE, INVOICE_AR.INVOICE_DATE, INVOICE_AR.AMOUNT_DUE UNION ALL SELECT 'Quarter 2' as 'qtr' count(jobid) as 'transcount', count(distinct job.patientid) as 'patientcount', sum(job.LANGUAGE_TCOST) as 'lcost', Sum(job.LANGUAGE_DISC_COST) as 'dlcost', avg(LANGUAGE_DISC) as 'avgLDisc', (sum(job.LANGUAGE_TCOST) + sum(job.LANGUAGE_DISC_COST)) as 'LGrossAmtBilled', (sum(LANGUAGE_TCOST) / count(distinct job.patientid)) as 'PatAvgL', (sum(LANGUAGE_TCOST) / count(jobid)) as 'RefAvgL', sum(LANGUAGE_DISC) as 'avgPercentDiscL', JOB.JURISDICTION, PAYER.PAY_COMPANY, PAYER.PAY_CITY, PAYER.PAY_STATE, PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE INVOICE_AR.INVOICE_DATE AS EXPR1, INVOICE_AR.AMOUNT_DUE FROM JOB INNER JOIN INVOICE_AR ON JOB.JOBID = INVOICE_AR.JOBID LEFT OUTER JOIN PAYER ON PAYER.PAYERID = JOB.PAYER.ID LEFT OUTER JOIN STATES ON JOB.JURISDICTION = STATES.INITIALS WHERE (INVOICE_AR.AMOUNT_DUE > 0)AND (INVOICE-AR.INVOICE_DATE BETWEEN @startdate and @enddate)AND (MONTH(INVOICE_AR.INVOICE_DATE) IN (4,5,6))AND (PAYER.PAYCOMPANY like '%' + @Company + '%') Group By JOB.JURISDICTION PAYER.PAY_COMPANY PAYER.PAY_CITY PAYER.PAY_STATE PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE, INVOICE_AR.INVOICE_DATE, INVOICE_AR.AMOUNT_DUE UNION ALL SELECT 'Quarter 3' as 'qtr' count(jobid) as 'transcount', count(distinct job.patientid) as 'patientcount', sum(job.LANGUAGE_TCOST) as 'lcost', Sum(job.LANGUAGE_DISC_COST) as 'dlcost', avg(LANGUAGE_DISC) as 'avgLDisc', (sum(job.LANGUAGE_TCOST) + sum(job.LANGUAGE_DISC_COST)) as 'LGrossAmtBilled', (sum(LANGUAGE_TCOST) / count(distinct job.patientid)) as 'PatAvgL', (sum(LANGUAGE_TCOST) / count(jobid)) as 'RefAvgL', sum(LANGUAGE_DISC) as 'avgPercentDiscL', JOB.JURISDICTION, PAYER.PAY_COMPANY, PAYER.PAY_CITY, PAYER.PAY_STATE, PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE INVOICE_AR.INVOICE_DATE AS EXPR1, INVOICE_AR.AMOUNT_DUE FROM JOB INNER JOIN INVOICE_AR ON JOB.JOBID = INVOICE_AR.JOBID LEFT OUTER JOIN PAYER ON PAYER.PAYERID = JOB.PAYER.ID LEFT OUTER JOIN STATES ON JOB.JURISDICTION = STATES.INITIALS WHERE (INVOICE_AR.AMOUNT_DUE > 0)AND (INVOICE-AR.INVOICE_DATE BETWEEN @startdate and @enddate)AND (MONTH(INVOICE_AR.INVOICE_DATE) IN (7,8,9))AND (PAYER.PAYCOMPANY like '%' + @Company + '%') Group By JOB.JURISDICTION PAYER.PAY_COMPANY PAYER.PAY_CITY PAYER.PAY_STATE PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE, INVOICE_AR.INVOICE_DATE, INVOICE_AR.AMOUNT_DUE UNION ALL SELECT 'Quarter 4' as 'qtr' count(jobid) as 'transcount', count(distinct job.patientid) as 'patientcount', sum(job.LANGUAGE_TCOST) as 'lcost', Sum(job.LANGUAGE_DISC_COST) as 'dlcost', avg(LANGUAGE_DISC) as 'avgLDisc', (sum(job.LANGUAGE_TCOST) + sum(job.LANGUAGE_DISC_COST)) as 'LGrossAmtBilled', (sum(LANGUAGE_TCOST) / count(distinct job.patientid)) as 'PatAvgL', (sum(LANGUAGE_TCOST) / count(jobid)) as 'RefAvgL', sum(LANGUAGE_DISC) as 'avgPercentDiscL', JOB.JURISDICTION, PAYER.PAY_COMPANY, PAYER.PAY_CITY, PAYER.PAY_STATE, PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE INVOICE_AR.INVOICE_DATE AS EXPR1, INVOICE_AR.AMOUNT_DUE FROM JOB INNER JOIN INVOICE_AR ON JOB.JOBID = INVOICE_AR.JOBID LEFT OUTER JOIN PAYER ON PAYER.PAYERID = JOB.PAYER.ID LEFT OUTER JOIN STATES ON JOB.JURISDICTION = STATES.INITIALS WHERE (INVOICE_AR.AMOUNT_DUE > 0)AND (INVOICE-AR.INVOICE_DATE BETWEEN @startdate and @enddate)AND (MONTH(INVOICE_AR.INVOICE_DATE) IN (10,11,12))AND (PAYER.PAYCOMPANY like '%' + @Company + '%') Group By JOB.JURISDICTION PAYER.PAY_cOMPANY PAYER.PAY_CITY PAYER.PAY_STATE PAYER.PAY_SALES_STAFF_ID, JOB.INVOICE_DATE, INVOICE_AR.INVOICE_DATE, INVOICE_AR.AMOUNT_DUE Order By 'QTR' asc
View Replies !
TSQL - WITH Statement
Hi guys, I need help with this one... Iam Trying to understand how to use the statement WITH I am running the code below, but getting error. note: I have SQL SERVER 2005 in my PC, but retrieving data from the SQL SERVER 2000 (in the server) Thanks in advance, Aldo. Code Snippet WITH MyCTE (FILTER, SORTGROUP) AS ( SELECT ACCOUNTS.FILTER, ACCOUNTS.SORTGROUP FROM ACCOUNTS ) SELECT * FROM MyCTE AS CTE_01; Error Messages: Msg 156, Level 15, State 1, Line 1 Incorrect syntax near the keyword 'WITH'.
View Replies !
How Can I Use Variables In This TSQL Statement
Hi all,I would like to replace the default directory location (c: emp) and thefilename (emails.csv) with variables like @FileDir and @FileName in thestatement below.SELECT @cnt = COUNT(*) FROM OpenRowset('MSDASQL', 'Driver={Microsoft TextDriver (*.txt; *.csv)}; DefaultDir=c: emp;','select * from "emails.csv"')However, my attempts have not been successful.Any ideas appreciated, and TIA.Greg
View Replies !
TSQL From An Access SQL Statement
Good morning one and all, I have some queries that were written in access that I need to port into SQL 7, the whole process is boring and mundane. Does any1 know of a translator (i.e. access sql to t-sql) or a reference to the differences between access SQL and t-Sql. Any and all help appreciated, Thanx Gurmi
View Replies !
What Is Wrong With This TSQL Statement
hello, I have wriiten this query to select all records from those tables in a database that have "to_be_transffered" column where this "to_be_transferred_column" is not null --code EXEC sp_MSForEachTable 'IF EXISTS(SELECT c.table_name, c.column_name FROM information_schema.columns c INNER JOIN information_schema.tables t ON c.table_name = t.table_name WHERE c.table_name = SUBSTRING(''?'', (CHARINDEX(''['',''?'', 2) + 1), ((LEN(''?'') - (CHARINDEX(''['',''?'', 2) + 1)))) AND c.column_name = ''to_be_transferred'' AND t.table_type = ''BASE TABLE'' ) BEGIN SELECT * FROM ? WHERE to_be_transferred IS NOT NULL END' But I am getting the following error Msg 207, Level 16, State 3, Line 12 Invalid column name 'to_be_transferred' I thought the if statement filters all those tables with the specified column and do select statement fot those tables only what did I do wrong, any suggestionm? Thanks
View Replies !
Tsql Case Statement
Hi, Here is the scenario. I want to add last year sale dollars in accordance with current period in exsiting fact table. And below is the syntax. Syntax: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- select a. store_key, a.fisc_date_key, sum(a.net_sale_Dollars) as sale_TY , sum ( b.net_sale_dollars ) as sale_LY , a.division_name, a.department_number fromFact 1 as a ,Fact 1 as b Whereb.fisc_date_key = (a.fisc_date_key -364) and a.division_name=b.division_name and a.department_number =b.department_number and a.store_key = b.store_key group by a.division_name, a.department_number, a.fisc_date_key, a.store_key ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The current table from this query is showing like: store_key date_key sale_TY sales_LY div dept ------------------------------------------------------------------------------------------------ 1 1 30 20 ABC 1 2 1 20 20 ABC 3 But, if we assume that in the current date, dept = 2 has a sale amount, and in parallel year if dept=2 does not have any sale then this information was excluded. The structure of table that I want to create must look like: store_key date_key sale_TY sales_LY div dept ------------------------------------------------------------------------------------------------ 1 1 30 20 ABC 1 2 1 20 20 ABC 3 2 1 15 0 ABC 2 >>>> want to put 0 value where only one side ( current or parrallel period) has sales info. So, I'm thinking the case statement like: Case statement logic like: ------------------------------------------------------------ if a. dept not exist in b.dept then Sale TY -> a.net_sale_dollars Sale LY -> 0 if b.dept not exist in a.dept then sale TY -> 0 sale LY -> b. net_sale_dollars ------------------------------------------------------------- below is the syntax which doesn't work (it's wrong): Syntax: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- select a. store_key, a.fisc_date_key, sum(case when a.department_number = b.department_number then a.net_sale_dollars else case when a.department_number NOT IN (b.department_number)then a.net_sale_dollars else null end) as sale_TY , sum ( case when b.department_number =a.department_number then b.net_sale_dollars else case when a.department_number NOT IN (b.department_number) as sale_LY, a.division_name, a.department_number fromFact 1 as a Fact 1 as b Whereb.fisc_date_key = (a.fisc_date_key -364) and a.division_name=b.division_name and a.department_number =b.department_number and a.store_key = b.store_key group by a.division_name, a.department_number, a.fisc_date_key, a.store_key , ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Is it possible to create these kind of structure? Please give me some comments. Thanks.
View Replies !
TSQL: Conditional Union Statement
Is it possible to have a conditional union statement in a stored proc?Here's an example on the northwind database. If says there's a syntaxerror near the UNION statement. Looks like it doesn't like having theBEGIN directly in front of it.Is the only solution to create a dynamic sql string then call exec onit?Any help appreciated.Tom.CREATE PROCEDURE usp_test(@both int = 1)ASSET NOCOUNT ONSELECT * FROM territories WHERE regionid = 1IF @both = 1BEGINUNIONSELECT * FROM territories WHERE regionid = 2ENDGO
View Replies !
Help With TSQL Statement To Check For Table Size
I have to deal with an environment where the developers create and modify tables at will, and the tool they use does not check if the table created is over the 8060 limit for a table. I have a sql statement below which checks the size for me, but I can't figure out how to put a where clause on it to check for the size being over 8060. I i have over 1000 tables to check and was going to write a cursor routine to check it and print it, but I need te where clause to work.Any help appreciated select Name=left(c.name,20), c.prec, scale = ISNULL(c.scale,0), t.name from syscolumns c inner join systypes t on c.xtype = t.xtype where id in (select id from sysobjects where name = 'mh_demographic2_') order by c.colid COMPUTE sum(c.prec)
View Replies !
Order By Statement Name Begining With A
HelloCan anybody tell me the correct MS SQL statement to display names: Where each name displayed is starting with a certain letter of the alphabet only. For example:The list should show names starting with the letter A (what must I change in my statement below) SELECT LastN, FirstN, TelFROM People_DBWHERE LastN = 'A' ORDER BY LastN ASCLast NameAdams,
View Replies !
Problem With ORDER BY Statement
I have list of sort options say Relevance, Date Posted, Salary and Job Location. I want to ORDER the search results with the options given above. Relevance, Salary and JobLocation in ascending order and Date Posted in Descending order. I tried adding ORDER BY to the below statement using case but its not working out. And ORDER BY doesn't accept variables as well. Can I use ORDER BY or Is their any other way handle this.Thanks in Advance.SELECT J.* FROM JobDetails AS J JOIN(SELECT DISTINCT J1.JobID FROM JobDetails AS J1inner join dbo.Split1(@list, ' ') AS SON J1.JobPosition LIKE '%' + S.Data + '%') J1 ON J1.JobID = J.JobIDSavvy
View Replies !
Union And Order Statement
I have the following query and for some reason when I try to run it, it tells me there is an incorrect syntax near the 'union' statement. Can you tell me what is wrong with this? SELECT MDN, DATEPART(d,CallDate) as CallDate, DATEPART(hh,CallDate) as Hour, sum(ceiling((Cast(DurationSeconds as Decimal)/60))) as Minutes FROM VoiceCallDetailRecord WHERE DurationSeconds > 0 and CallDate >= '02/19/2007' and calldate < '03/19/2007' and COS = 3 AND (((CONVERT(varchar, CallDate, 108) Between '21:00:00' AND '23:59:59') OR (CONVERT(varchar, CallDate, 108) Between '00:00:00' AND '07:00:00')) OR DATEPART(weekday, CallDate) in (1,7)) and NOT (Left(Endpoint,3) IN ('011') or (Left(Endpoint,4) IN ('1340','1876','1868','1809', '1246','1242','1780','1403', '1250','1604','1807','1519', '1204','1506','1709','1867', '1902','1705','1613','1416', '1905','1902','1514','1450', '1418','1819','1306','1867'))) order BY DATEPART(d,CallDate), DATEPART(hh,CallDate), MDN UNION SELECT MDN, DATEPART(d,CallDate) as CallDate, DATEPART(hh,CallDate) as Hour, sum(ceiling((Cast(DurationSeconds as Decimal)/60))) as Minutes FROM ZeroChargeVCDRecord WHERE DurationSeconds > 0 and CallDate >= '02/19/2007' and calldate < '03/19/2007' and COS = 3 AND (((CONVERT(varchar, CallDate, 108) Between '21:00:00' AND '23:59:59') OR (CONVERT(varchar, CallDate, 108) Between '00:00:00' AND '07:00:00')) OR DATEPART(weekday, CallDate) in (1,7)) and NOT (Left(Endpoint,3) IN ('011') or (Left(Endpoint,4) IN ('1340','1876','1868','1809', '1246','1242','1780','1403', '1250','1604','1807','1519', '1204','1506','1709','1867', '1902','1705','1613','1416', '1905','1902','1514','1450', '1418','1819','1306','1867'))) order BY DATEPART(d,CallDate), DATEPART(hh,CallDate), MDN
View Replies !
Using IF...Else Statement SELECT Statement
Hi All, Can some one point me in the right direction in how to construct my SQL query within my cursor? I Have got a cursor which i am using to iterate through a table, What i am trying to do is in my statement(used to open the cursor) is compare 2 tables (the one which my cursor is iterating) to see if there is a matching row in the other table (using both tables ID's Like So: SELECT column_List FROM Table1 WHERE Table1_id = Table2_id so for each row my cursor checks if there is a corresponding match in table2... but i would like to write to an error log and do other statements if there is no match how do i add this condition to my statement either using an if...else statement proceeding to the next row? here is the statment i attempted to write: SELECT column_List FROM table1 WHERE Table1_id = Table2.id now i want to incoporate the statements below into the statement above as a condition when table1.id <> table2.id IF table1.id <> table2.id BEGIN SET @DebugMessage = 'data not live.' RAISERROR (@DebugMessage, 16, 1) WITH LOG END essentially what i am trying to sayin my statement is: go to the first row check if it has a match in table 2, if there is no match execute a number of statements such as error loging e.t.c go to the next row repeat the previous statements ...i also looked through some Case...When statements am just not sure how to put in the condition thanks in advance
View Replies !
Alternative To CASE In The Order By Statement?
The query below at the bottom works, but when I try to add the line below (a third line/argument in the CASE statement) then I get an error. It is not possible to have a table name and a DESC (sort order) in the same CASE line/argument. Are there other ways to accomplish this, because I would like to sort with both "h.ObjectType" and "h.ObjectType DESC"? WHEN @SortBy = 2 THEN h.ObjectType DESC SELECT weight, ObjectText.ObjectId, ObjectText.ObjectType, ObjectText.Title, ObjectText.ShortText FROM @hits h INNER JOIN ObjectText ON h.id = ObjectText.ObjectId AND h.ObjectType = ObjectText.ObjectType WHERE ObjectText.LanguageCode = @LanguageCode ORDER BY CASE WHEN @SortBy = 0 THEN weight WHEN @SortBy = 1 THEN h.ObjectType END DESCRegards, Sigurd
View Replies !
Strange Behaviour In ORDER BY Statement
HiI've done a search and found plenty on ORDER BY problems, but mineshopefully a syntax error.This is a test segment from my stored procedure.DECLARE @Name varchar(50), @SortType IntSET @Name = "canal lock"SET @SortType = 8SELECT dbo.ite_Item.ite_IDFROM dbo.ite_Item LEFT OUTER JOINdbo.iti_ItemImages ONdbo.ite_Item.ite_ID = dbo.iti_ItemImages.iti_LinkToItemWHERE iti_ItemImages.iti_LinkToPhotoType=1AND ite_Name LIKE '%' + @Name + '%'ORDER BYCASEWHEN @SortType = 3 THEN dbo.ite_Item.ite_DateWHEN @SortType = 5 THEN dbo.ite_Item.ite_ViewsWHEN @SortType = 7 THEN dbo.ite_Item.ite_DescriptionEND ASC,CASEWHEN @SortType = 2 THEN dbo.ite_Item.ite_NameWHEN @SortType = 4 THEN dbo.ite_Item.ite_DateWHEN @SortType = 6 THEN dbo.ite_Item.ite_ViewsWHEN @SortType = 8 THEN dbo.ite_Item.ite_DescriptionEND DESC,CASEWHEN @SortType <> 2 THEN dbo.ite_Item.ite_NameEND ASCI get various errors:@SortType = 2. This is a Name field varchar(50)Syntax error converting the varchar value 'Canal Lock' to a column ofdata type smallint.I only have one smallint col and that is the ite_Views column. Why isit trying to convert a varchar(50) col?@SortType = 3. This is a ISO date field nchar(8)The conversion of the nvarchar value '20030909' overflowed an INT2column. Use a larger integer column.Why?@SortType = 7, 8. These are description fields varchar(5000)Syntax error converting the varchar value '<snip>' to a column of datatype smallint.Again, why?All other sort types are fine.What I'm thinking is that when the ORDER BY code is run, it does someconversion but what?Many thanks in advance if anyone has any ideas?Sam
View Replies !
Convert Access IIF To Sql In Order By Statement
ive been having a lot of trouble converting this last line from my access database to sql server. i was hoping someone could help order by Name, IIF(Risk.Calc like H*, 1, IIF (Risk.Calc like M*,2,3)), Risk.Chance*risk.cons DESC, risk.title any suggestions?
View Replies !
Limit And Order In Union Statement
hi all, i have the following union statement, which works like a charm:SELECT [Name], [EventID] AS [ItemID], [TourID], [Date], NULL AS [StartDate], [Date] AS [SortDate], [Type] FROM [Events] WHERE [TourID] IS NULL AND AccessLevel <= @AuthenticationLevel UNION SELECT [Name], [TourID] AS [ItemID], [TourID], NULL AS [Date], [StartDate], [StartDate] AS [SortDate], '2' AS [Type] FROM [Tours]WHERE AccessLevel <= @AuthenticationLevel ORDER BY [SortDate] now i want to ad a limit to this statement, but i can't get it working. i have tried this:SELECT * FROM (SELECT [Name], [EventID] AS [ItemID], [TourID], [Date], NULL AS [StartDate], [Date] AS [SortDate], [Type] FROM [Events] WHERE [TourID] IS NULL AND AccessLevel <= @AuthenticationLevel UNION SELECT [Name], [TourID] AS [ItemID], [TourID], NULL AS [Date], [StartDate], [StartDate] AS [SortDate], '2' AS [Type] FROM [Tours]WHERE AccessLevel <= @AuthenticationLevel) ORDER BY [SortDate] LIMIT 2 but i keep getting an error message saying "Incorrect syntax near the keyword "ORDER". what am i doing wrong? -bm
View Replies !
Writing Union Statement With 2 Order By's
Hi, I'm trying to write a UNION statement with 2 selects and can't figure out for the life of me how to do it. select top 10 * from tblusers ORDER BY dateJoined UNION select top 10 * from tblusers ORDER BY lastLogin The union works fine without the order by's, but I really need the order by's in there and I don't understand why its so difficult to do. Surely there must be some other strategy? Any help is much appreciated.. thanks!! mike123 How can I reproduce this results ?
View Replies !
2000 To 2005 SQL Statement Order By Issue
Hi, I have a simple sql statement that used to work in SQL 2000 that isn't working in SQL 2005. The order by clause doesn't seem to have any effect on the result set. The sql statement is: ALTER VIEW dbo.SELECT_PP_END AS SELECT TOP 100 PERCENT PP_PERIOD_ID, CONVERT(VARCHAR, PP_END_DATE, 101) AS PP FROM dbo.PP_PERIODS ORDER BY PP_END_DATE DESC The period end date is appearing in ascinding order on sql server 2005 and in the correct order in sql 2000. Any idea? Thank you for your help - T.A.
View Replies !
Error Using Case Expression In Order By Statement
I have been trying to get the following Selects to work using a case expression in the order by section. I know I can easily separate out the two statements but I want to do a select using the case statement below ; however, I keep getting error 16 --"Order by items must appear in the select list if the statement contains a union. If remove the case statement and put order by "internalID desc" I receive no errors. Moreover, when I take out the union statement and execute the two select statements with each including the case expression it runs as planned. Can anyone tell what the problem is here? I have combed the web looking for an answer, but it seems that the statement is valid. Thanks J declare @date set @date = '2001' select internalID from section_data_v3 union select internalID from section_data_v4 order by case when (@date = '2001') then internalID end desc
View Replies !
Column Aliases In Case Statement In Order By
Hi All, I have this query : select col1, col2, col3, col4, col5,..... , (select col99 from tab2) as alias1 from tab1 where <condition> order by case @sortby when 'col1' then col1, when 'col2' then col2, when 'col3' then col3, when 'col99' then col99 end when i execute the above query it gives me the following error message. Server: Msg 207, Level 16, State 3, Line 1 Invalid column name 'col99'. Thanks in advance. Thanvi.
View Replies !
Select Statement Problem - Group By Maybe Nested Select?
Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
View Replies !
Field Names From SQL Statement
Is there anyway to determine what the resulting Field Names are going to be from a SQL Statement? For example: SELECT TABLE1.FIELD1, TABLE1.FIELD2, TABLE1.FIELD3, TABLE2.FIELD1 AS ANOTHERNAME FROM TABLE1 INNER JOIN TABLE2 ON TABLE1.PK = TABLE2.FK resulting field names: FIELD1 FIELD2 FIELD3 ANOTHERNAME Seems easy enough splitting all values before "FROM" by comma and doing some manipulation to remove table names and anything before the word "AS". However, it gets more difficult when you have complex CASE statements embedded in you query that may also contain commas. Just a shot in the dark because I don't know if anyone has already done something like this before. Thank you in advance, Jeff
View Replies !
|
TRACKER
