The Attempt To Add A Row To The Data Flow Task Buffer Failed With Error Code 0x8007000E

Mar 5, 2008



Hi Everyone-

i am facing a memery problem error while i am running the SSIS package
while i am running the package it show the following Error

In Spend Dataload package: A buffer failed while allocating 70485760 bytes.

--------------------------------------------------------------------------------
In Spend Dataload package: The system reports 54 percent memory load. There are 3747647488 bytes of physical memory with 1694883840 bytes free. There are 2147352576 bytes of virtual memory with 1061253120 bytes free. The paging file has 7328251904 bytes with 5083856896 bytes free.

--------------------------------------------------------------------------------
In Spend Dataload package: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.

--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (2718) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.

--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.

--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.

--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.


is there anyone know the solution of that problem and please dont tell me to use extra memery or a hardware solution as this option is not available.

thanx
Maylo

View 5 Replies


ADVERTISEMENT

The Attempt To Add A Row To The Data Flow Task Buffer Failed

Aug 10, 2006



Hi,

I am trying to transfer the data from flat file to sql server.When I am running the package on local server(network server) it works fine.But when I use it to transfer the data to online server it starts and shows 2771 rows transfered and remains on that only, dosent stop or give a error. When i stop the execution I get the following errors:



[DTS.Pipeline] Error: The pipeline received a request to cancel and is shutting down.



[Loose Diamond File [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.



[DTS.Pipeline] Error: The PrimeOutput method on component "Loose Diamond File" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.



[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.



Can any one help me to find what the problem is.

Thanks in advance.

View 4 Replies View Related

Foreach Loop, Data Flow Task Buffer Failed

Jun 5, 2006

I have a package that runs fine by itself. But when I run it inside a Foreach Loop container on a parent package, I got a buffer error after a few loops. Here are a couple of the error lines:

A buffer failed while allocating 49085616 bytes.

The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.

I already played around with the Data Flow task€™s DefaultBufferMaxRows and DefaultBufferSize properties, and I am still getting the error. Just wondering if there is a memory leak or something with the Foreach Loop task. I haven€™t install SP1. Maybe SP1 fixes this issue?

View 3 Replies View Related

SSIS Failure - Can Not Add A Row To The Data Flow Task Buffer

Apr 18, 2006

I have a relatively simple SSIS package that I'm building for a data mining process. The package starts with an OLE DB data source, passes the results of a SQL Command (query) along to a conversion step, which then gets sent to a Term Lookup task. The Term Lookup then writes the result to an OLE DB Data Destination. Pretty simple. The OLE DB data source query returns about 80,000 rows if you run it through SQL WB. The SSIS editor shows 9,557 rows make it out of the source, and into the conversion step, 9,557 make it out of the conversion and into the lookup, and about 60,000 rows make it out of the lookup and are written to the results table. Then the package fails with the following errors listed on the progress screen. I was assuming that the 9,557 was some type of batching that was occurring in the process, but now I'm not so sure.

Thoughts?

Frank

[DTS.Pipeline] Error: The ProcessInput method on component "My Component" (117) failed with error code 0xC02090E5. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC02090E5.
[DTS.Pipeline] Error: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
[DTS.Pipeline] Error: Thread "WorkThread1" has exited with error code 0xC0047039.
[My Data Source Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "My Component" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.

View 2 Replies View Related

Data Flow Failed Code 0xC004702C

Oct 14, 2007

Hi,

I encountered this error while running a data flow:

OnError,,,Data Flow,,,10/14/2007 2:00:57 AM,10/14/2007 2:00:57 AM,-1073450974,0x,SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Business Unit Lookup 1" (26410) failed with error code 0xC004702C. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.

I'm using OLEDB Source, Lookup, SQL Destination in the data flow.

I tried running the package again and it worked fine this time.

Why is it like that?

View 1 Replies View Related

Attempt FASTLOAD If Error Perform Regular Data Flow Transfer And Redirect Errors To Text File

Feb 15, 2008



I'm having problems designing a package to attempt to execute a fast load data transfer but failback to regular speed with error redirection in the event of an error.

The way I designed this was to add one data flow task to my package called "DFT FASTLOAD". The data flow copies a table SRC to another table DEST in the same SQL Server database. In the error handler for the data flow task I copied the original data flow task and changed the name to "DFT REGULARLOAD with Error redirection". In this data flow task I did not use fast load and addtionally redirected errors to a text file.

In the Data Flow Task "DFT FASTLOAD". I am copying from a varchar source field(with non-date strings) to a datetime destination field to force errors. However the Data Flow Task "DFT REGULARLOAD with Error redirection" never seems to start transferring data from source to destination. The data Flow Task "DFT REGULARLOAD with Error redirection" turns yellow (after the error occurs in "DFT FASTLOAD"), but no data is being transferred). It seems like it hangs.

Do I need to increase the MaximumError Count or something? The data flow task "DFT FASTLOAD" does not turn red when the error occurs it just remains yellow, so i assume I'm on the right track since it seems the error is caught.

I have added screenshots ... hopefully these screenshots will clarify my problem.

DESIGN:
http://i256.photobucket.com/albums/hh179/abzbank/DESIGN_FASTLOAD1.jpg
http://i256.photobucket.com/albums/hh179/abzbank/DESIGN_FASTLOAD2.jpg
http://i256.photobucket.com/albums/hh179/abzbank/DESIGN_FASTLOAD3.jpg
http://i256.photobucket.com/albums/hh179/abzbank/DESIGN_FASTLOAD4.jpg
http://i256.photobucket.com/albums/hh179/abzbank/DESIGN_FASTLOAD5.jpg
http://i256.photobucket.com/albums/hh179/abzbank/DESIGN_FASTLOAD6.jpg


RUNTIME:
http://i256.photobucket.com/albums/hh179/abzbank/RUN_FASTLOAD7.jpg
http://i256.photobucket.com/albums/hh179/abzbank/RUN_FASTLOAD8.jpg
http://i256.photobucket.com/albums/hh179/abzbank/RUN_FASTLOAD9.jpg
http://i256.photobucket.com/albums/hh179/abzbank/RUN_FASTLOAD10.jpg
http://i256.photobucket.com/albums/hh179/abzbank/RUN_FASTLOAD11.jpg


I can provide more details if needed... but really this is just a basic test.
Any assistance would be appreciated!

View 9 Replies View Related

Error: The Buffer Manager Failed To Create A New Buffer Type

Apr 28, 2006

Hi

I have a master package that executes a series of sub packages run from a SQL Agent job. One of those sub packages has been stable for a week, running at least once per day, but it just failed despite having been run once already today with the same set of input data.

There were a series of errors showing in the event log for the Execute Package Task starting with "Buffer Type 15 had a size of 0 bytes.", then "The buffer manager failed to create a new buffer type.", then "The Data Flow task cannot register a buffer type. The type had 32 columns and was for execution tree 3.", then "The layout failed validation." and finally "Error 0xC0012050 while loading package file "C:[Package].dtsx". Package failed validation from the ExecutePackage task. The package cannot run.".

SQLIS.com reports the constant for the error code as DTS_E_REMOTEPACKAGEVALIDATION ( http://wiki.sqlis.com/default.aspx/SQLISWiki/0xC0012050.html ).

I then ran the package on my dev machine in BIDS and it worked fine, so I re-ran the job on the server and this time that package executed ok, but another one fell over but did not put anything in the event log.

Does any one have any idea what happened?

TIA . . . Ed

View 2 Replies View Related

Error: The Task With The Name Data Flow Task And The Creation Name DTS.Pipeline.1 Is Not Registered For Use On This Computer

May 4, 2006



Hi,

I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:

The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.

Then when I try to delete it it gives this other error:

Cannot remove the specified item because it was not found in the specified Collection.

I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.

Any suggestions why this is happening and how to fix it?

View 17 Replies View Related

[ActiveX Script Task] Error: Retrieving The File Name For A Component Failed With Error Code 0x001B6438.

Jul 28, 2006

This error occurs when the ActiveX task tries to execute:

[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.

Anybody know how to troubleshoot these errors? I can't find anything on this error code. The same script works in DTS.







View 8 Replies View Related

Error Using Row Count Task In Data Flow Task

Dec 20, 2007

Hi,

I'm trying to get a record count out of a databse using OLE DB Source and row count tasks but keep getting an error. I set up a variable as int32 and select the variable name in the row count task and when I go to the Input Columns tab to select a field to count, it gives me this error:

Error at Data Flow Task[Row Count[505]]: The component "Row Count" (505) has forbidden the requested use of the input column with lineage ID 32.

I don't even know what this means?

thanks,

View 4 Replies View Related

Lookup Task Data Flow Transformation Causes Data Flow Task To Hang?

Dec 28, 2007

Hi,
I'm trying to implement an incremental data pull (Oracle to SQL) based on Andy's blog:
http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx

My development machine is decent: 1.86 GHz, Intel core 2 CPU, 3 GB of RAM.
However it seems the data flow task gets hung whenever I test the package against the ~6 million row source, as can be seen from these screenshots. I have no memory limitations on the lookup transformation. After the rows have been cached nothing happens. Memory for the dtsdebug process hovers around 1.8 GB and it uses 1-6 percent of CPU resources continuously. I am not using fast load to insert new records into my sql target table. (I am right clicking Sequence Container 3 and executing this container NOT the entire package in the screenshots)

http://i248.photobucket.com/albums/gg168/boston_sql92/1.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/2.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/3.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/4.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/5.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/6.jpg


The same package works fine against a similar test table with 150k rows.
http://i248.photobucket.com/albums/gg168/boston_sql92/7.jpg
http://i248.photobucket.com/albums/gg168/boston_sql92/8.jpg

The weird thing is it only takes 24 minutes for a full refresh of the entire source table from Oracle to the SQL target table.
Any hints,advice would be appreciated.

View 18 Replies View Related

Error At Data Flow Task

Dec 12, 2007

Hi all, I am getting the following when trying to import text coloums from execl to SQL server 2005. Any ideas?

Error at Data Flow Task [Destination] Coloums "blar" and "Blar_name" cannot convert between unicode and non-unicode sting types.

Any help would be great.

Thanks

Dave


Dave Dunckley says there is a law for the rich and a law for the poor and a law for
Dirty Davey.

View 3 Replies View Related

Data Flow Task Error

Jan 7, 2008

Hi,

I have SQL Server 2005 Express edition on my machine. On an SSIS project in BIDS, when i drag a "Data Flow Task" to the package it returns the following error:

The designer could not be initialized. (Microsoft.DataTransformationServices.Design)

Does this has anything to do with the fact that i don't have SSIS installed on my machine?

I thought that SSIS was only needed (on my machine) for the runtime, just to run the packages. To create and edit the pachages i need to install SSIS on my machine too? this doesn't makes sense, maybe it's another problem.

Can anyone help me on this?

Thank you,
Rafael Augusto

View 10 Replies View Related

Error With Data Flow Task

Jul 3, 2007

I am having problems with the Data Flow task. It does not even show up in the list of items to drop into the SSIS project.

If I go to the Data Flow tab and hit create, I get the follow error. I have tried repairing and reinstalling, but nothing seems to clear up the error. Without rebuilding my machine, is there anyone who knows how to get the Data Flow Task reinstalled properly?

Thanks

Wayne

TITLE: Microsoft Visual Studio------------------------------Registration information about the Data Flow task could not be retrieved. Confirm that this task is installed properly on the computer. ------------------------------ADDITIONAL INFORMATION:TaskHost "{C3BF9DC1-4715-4694-936F-D3CFDA9E42C5}"' is not installed correctly on this computer. (Microsoft.DataTransformationServices.Design)For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=TaskHostNotInstalled&LinkId=20476------------------------------BUTTONS:OK------------------------------

View 1 Replies View Related

ERROR AT DATA FLOW TASK

Oct 17, 2006

HI, I HAVE A NEW PROBLEM...HOPE SOMEONE KNOWS WHAT THE $#%#$ IS HAPPENING. HERE IT´S THE THING: I´M USING A DATA FLOW TASK TO READ DATA FROM AN ORACLE SERVER AND  TRANSFER THE INFO TO MY SQL 2005 SERVER, THE SOURCE IS AVAILABLE  AND THE CONNECTION IS WORKING, I'M USING A DATA READER SOURCE TO CONNECT AND EXTRACT.  I´VE PUT THIS DTS IN A JOB AND IT WAS OK, IT HAD BEEN RUNNING OK FOR ALMOST A MONTH BUT SUDDENLY HIS MORNING IT FAILED WITH THE FOLLOWING ERROR:

SSIS package "SAZSIE_CargaVentasSeguros (1).dtsx" starting.

Information: 0x4004300A at Extrae SAZ_GranoO_New, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at Extrae SAZ_GranoO_New, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at Extrae SAZ_GranoO_New, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at Extrae SAZ_GranoO_New, DTS.Pipeline: Pre-Execute phase is beginning.

Information: 0x4004300C at Extrae SAZ_GranoO_New, DTS.Pipeline: Execute phase is beginning.

Error: 0xC0047062 at Extrae SAZ_GranoO_New, SAZ_GranoONew [421]: System.NullReferenceException: Object reference not set to an instance of an object.

at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)

at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper90 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer90[] buffers, IntPtr ppBufferWirePacket)

Error: 0xC0047038 at Extrae SAZ_GranoO_New, DTS.Pipeline: The PrimeOutput method on component "SAZ_GranoONew" (421) returned error code 0x80004003. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.

Error: 0xC0047021 at Extrae SAZ_GranoO_New, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.

Information: 0x402090DF at Extrae SAZ_GranoO_New, OLE DB Destination [1022]: The final commit for the data insertion has started.

Information: 0x402090E0 at Extrae SAZ_GranoO_New, OLE DB Destination [1022]: The final commit for the data insertion has ended.

Information: 0x40043008 at Extrae SAZ_GranoO_New, DTS.Pipeline: Post Execute phase is beginning.

Information: 0x40043009 at Extrae SAZ_GranoO_New, DTS.Pipeline: Cleanup phase is beginning.

Information: 0x4004300B at Extrae SAZ_GranoO_New, DTS.Pipeline: "component "OLE DB Destination" (1022)" wrote 19522 rows.

Task failed: Extrae SAZ_GranoO_New

Warning: 0x80019002 at SAZSIE_CargaVentasSeguros: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.

SSIS package "SAZSIE_CargaVentasSeguros (1).dtsx" finished: Failure.

 

THE DATA HAS BEEN COPIED INTO MY DESTINATION TABLE, BUT THE PACKAGE ENDS IN AN ERROR, WHAT IS THE PROBLEM WITH THIS???

PLASE SOMEONE !!!!

THANKS!!!!!!!

View 8 Replies View Related

Data Flow Task- Error Output

Apr 19, 2006

I am trying to transfer data from one table to the other using a Data Flow Task of SSIS (SQL Server Integration Services)
I am using an OLE DB Source and an OLE DB Destination.

Source Table TABLE1
Column Datatype
ID - Int ,not null
EmployeeName - nvarchar(50), null

Destination Table TABLE2
Column Datatype
ID - Int ,not null
EmployeeName - nvarchar(50), not null

There are 10 rows in TABLE1 of which 2 have null value in EmployeeName column.
If I try to populate all TABLE1 row values into TABLE2 the data flow will fail as TABLE2.EmployeeName will not accept null value.
So I have inserted a FlatFileDestination into the DataFlow and the OLE DB Destination ErrorOutput is set as input to the FlatFile. In the OLE DB Destination Editor the ErrorOutput€™s error property is set to Redirect Row.
When I do this the 8 correct data from TABLE1 will be inserted into TABLE2 and the two rows with null value will be inserted into the FlatFile.

My requirement is this:
I don€™t want any data to be inserted into TABLE2 but I want the two erroneous records to be written into the FlatFile.

Please suggest.

View 2 Replies View Related

Need Assistance With Data Flow Task Error - Please Help

Mar 6, 2007

I am trying to execute a Data Flow Task. There is only one task in the data flow task so far, and that is a Flat File Source task. I also set up a Connection Manager for the file, myfile.txt.

When I try to run the Data Flow Task, I get these errors:

The first problem seems to be with the connection, on the first line. What connection element is missing here? The others seem to be truncation errors. I don't know why that is. I changed the column sizes to match the sizes of database columns. They ARE surrounded by double-quotes, but I have {"} specified as a Text Qualifier in my Connection Manager.

Please, need help!


Error: 0xC001000E at : The connection "{F6513CB9-29E2-4D88-A86B-0EF9DFABE9D6}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Source [2168]: The processing of file "D:myfile.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC02020A1 at Data Flow Task, Flat File Source [2168]: Data conversion failed. The data conversion for column "Column 0" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Error: 0xC020902A at Data Flow Task, Flat File Source [2168]: The "output column "Column 0" (2185)" failed because truncation occurred, and the truncation row disposition on "output column "Column 0" (2185)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC0202092 at Data Flow Task, Flat File Source [2168]: An error occurred while processing file "D:myfile.txt" on data row 1.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Flat File Source" (2168) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Source [2168]: The processing of file "D:myfile.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Task failed: Data Flow Task

View 5 Replies View Related

SSIS Error With Data Flow Task

Feb 29, 2008

Hi!

When I add a Data Flow Task to a package, save it and then close. When I open it again, I get 3 errors and the detail of the Data Flow Task is empty.

I had try to uninstall and install my SQL Server 2005, but the problem continues.

Can some one help me on this?

Sérgio Cardoso

View 4 Replies View Related

Analysis :: Error At Data Flow Task

Sep 14, 2015

I am using the Visual Studio for Integration Services. and creating a database.I am trying to download data from a Cube table (SALES_HISTORY), using a Microsoft OLE DB provider for Analsysis services 10.0. in this table, it has visible 2 fields (SALE_TRANSACTION_ID) and (TRANSACTION DATE) but have many hidden fields, such CUSTOMER, PART_NUMBER, etc . when I try to create a query in the OLE DB source editor, I can see all the fields, and be able to create the SQL command.

However when I want to preview it or parse the query, I have the following message: 

Exception from HRESULT: 0x0C0202009 error at data flow task [OLE DB Source [1]]: SSIS Error code DTS_E_OLEDBERROR. an OLE DB error has occurred. Error Code 0x80004005.

an OLE DB record is available. Source: " Microsoft OLE DB Provider for Analysis Services 2008". Hresult:0x80004005 description: Query (1,15) error from the SQL query module the 'Customer' column cannot be found in the 'SALES_HISTORY' table...how to extract the data from the visible and also hidden fields (in excel, are called properties).

View 2 Replies View Related

Data Flow Task Error To Extract Data From Sql Server To Excel

Mar 28, 2008

Hi All,

I want to export data from SQL Server2005 to an Excel spreadsheet thru "Data Flow Task". I am using OLE DB for SQL Server for the source connection and a Connection To Excel as my destination source. The Excel spreadsheet (2003) exists and has the first row with column names. I don't have any warnings before trying to execute.

The SQL datable fileds are
i) ID - Int

ii) RefID
iii) txtRemarks - nvarchar(MAX)
iv) ddlWaterLevel - nvarchar(50)

While executing the tasks, I got the error
Error: 0xC0202025 at Data Flow Task, Excel Destination [427]: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "Excel Destination" (427) failed the pre-execute phase and returned error code 0xC0202025.


After analysing I found in the DataFlow --> Excel destination --> Advanced Editor for Excel Destination, the default data type for txtRemarks shows as "Unicode string [DT_WSTR]". But this is supposed to be "Unicode text stream [DT_NTEXT]". Even if I change the data type in the design time, It doesn't accept.

Please do help me out.

thanks
Sanra

View 4 Replies View Related

Validation Error. Data Flow Task: OLE DB Source [94]:

Nov 8, 2007

Dear all,

I am trying to executed a packege so that it loads data from from the excel file to the SQL Server Server database.
When I execute it, it prompts the following error message and 1 warning
The excel file has three colums, Week, Item and Value




Error 4 Validation error. Data Flow Task: OLE DB Source [94]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E37 Description: "ORA-00942: table or view does not exist ". Test - GET NW PERF 1.dtsx 0 0

Warning




Warning 1 Validation warning. Data Flow Task: OLE DB Destination [36]: The external metadata column collection is out of synchronization with the data source columns. The column "DAY" needs to be added to the external metadata column collection. The column "TCH_AVAIL" needs to be added to the external metadata column collection. The column "PDROP" needs to be added to the external metadata column collection. The column "P_HR" needs to be added to the external metadata column collection. The column "SFAIL" needs to be added to the external metadata column collection. The "external metadata column "VALUE" (90)" needs to be removed from the external metadata column collection. The "external metadata column "ITEM" (89)" needs to be removed from the external metadata column collection. Not in use - GET NW STATS.dtsx 0 0

Could someone give me a hand here.

Regards,

Ronald

View 1 Replies View Related

Integration Services :: Data Flow Task Failed After Loading 29000 Rows Out Of 234567 Rows

Oct 13, 2015

I am facing an issue that Data flow task failing after loading 29000 rows out of 2lakhs rows.

I am loading data from .csv file to OLE DB Destination.

This data flow task is placed inside For each loop container.

is this issue because of any performance issue in SSIS packages such as buffer size.

find the error below:

DFT Load Data from FlatFile:Error: The conditional operation failed.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. 

The "DER Add Calc Columns" failed because error code 0xC0049063 occurred, and the error row disposition on "DER Add Calc Columns.Outputs[Derived Column Output].Columns[M_VALUE_NUM]" specifies failure on error. An error occurred on the specified object of the specified component.  There may be error messages posted before this with more information about the failure.

DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "DER Add Calc Columns" (48) failed with error code 0xC0209029 while processing input "Derived Column Input" (49). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information about the failure.

[code]....

View 8 Replies View Related

Any Error In A Data Flow Task Makes My Package Stop

Apr 10, 2008

Hi, this is my first post and I'm relatively new to SSIS so please go easy on me.

Without going into too much detail about it, I've set up a simple SSIS package which does this in a nutshell:

Foreach loop picks up all *.xls files in a given folder
1 - Puts the name of the current spreadsheet into a variable
2 - File System Task copies the current spreadsheet ("abc.xls") to a file called "work.xls"
3 - Data Flow task performs data extraction on "work.xls" and puts it into a SQL server database
4 - File System Task moves "abc.xls" into a "success" folder
Continues with loop - move onto next spreadsheet

This works fine, so long as the spreadsheets all have the same number of columns.

As soon as one of them has a column missing (believe me, this will happen - we're dealing with users here) the package falls over at step 3.

When the package comes across an erroneous spreadsheet, what I'd like to do is move the offending file to a failure folder (making step 4 either a success or failure file move) and carry on with the next one.

I know that you can have an error path (the red line) from any step within the dataflow task, but this doesn't help me because the error lies in the structure of the spreadsheet and not the contents.


I've already come up with a work around whereby each file is moved into the failures folder just after step 2, then moved from the failures folder into the success folder at step 4.

This almost gives me what I want, although of course the package still falls over whenever it encounters a dodgy looking spreadsheet.

Is there any way that I can get the package to do what I'm after?



Many thanks,



Simon

View 1 Replies View Related

Problems Using Error Row Redirection And Transactions In A Data Flow Task

Mar 22, 2007

I am having a problem getting error rows to redirect between an OLE DB Source and an OLE DB Destination when using transactions. Each time I turn on the transaction control I get an error stating:

"[OLE DB Destination [48]] Error: The input "OLE DB Destination Input" (61) cannot be set to redirect on error using a connection in a transaction."

I get the above Error when using MSDTC. I have the data flow inside of a Sequence Container with the transaction option set to REQUIRED and the Isolation Level set to Serializable. I have tried all the Isolation levels.

I have the error rows piped off to a seperate OLE DB Destination. I have also tried using native SQL transactions with Execute SQL tasks to BEGIN, COMMIT or ROLLBACK the transaction. This does not work either. It looks like it works properly when the data flow is successful but using profiler I can see SSIS opens up a seperate process for the BEGIN and then another one with the Data Flow task. When I intentionally fail the Data Flow the Rollback always fails. I made sure I had RetainSameConnection turned on for the Connection I was using.

I am speculating that the Data Flow does not know what to Rollback the actual rows that succeeded or the error rows that are getting piped off.

I am fairly stumped on this one so any help is appreciated.

Thanks

View 4 Replies View Related

SSIS Error - Data Flow Task LocaleID 0 Not Installed On This System

May 2, 2006

I get the following error when trying to import (have tried flat files, Excel & Access). I've searched but have not found a resolution. Any help is appreciated.



Jeff

Validating (Error)



Messages

Error 0xc00470b6: Data Flow Task: The LocaleID 0 is not installed on this system.
(SQL Server Import and Export Wizard)


Error 0xc004706b: Data Flow Task: "component "Source - Test1" (1)" failed validation and returned validation status "VS_ISBROKEN".
(SQL Server Import and Export Wizard)


Error 0xc004700c: Data Flow Task: One or more component failed validation.
(SQL Server Import and Export Wizard)


Error 0xc0024107: Data Flow Task: There were errors during task validation.
(SQL Server Import and Export Wizard)


View 33 Replies View Related

Custom Data Flow Task Throwing Error When Run From Command Prompt

Jan 17, 2007



Hi,

I developed a custom data flow task in .net 2.0 using Visual Studio 2005. I installed it into GAC using GACUTIL and also copied it into the pipeline directory. This task runs absolutely fine when I run it on my local machine both in BIDS and using the script in windows 2000 environment. However, when I deployed this package into a windows 2003 server, the package fails at the custom task level. I checked the GAC in windowsassembly directory and it is present. Also I copied the file into the PipeLine directory and verified that I copied it into the correct pipeline directory by checking the registry. The version of the assembly is still Debug. I looked up documentation in MSDN but there is very little information about the errors I am seeing.

The error I get is pasted below, Can somebody please help me as I am currently stuck and running out of ideas to fix this problem.

Code: 0xC0047067

Source: DFT Raw File DFT Raw File (DTS.Pipeline)

Description: The "component "_" (2546)" failed to cache the component metadata object and returned error code 0x80131600.

Code: 0xC004706C

Source: DFT Raw File DFT Raw File (DTS.Pipeline)

Description: Component "component "_" (2546)" could not be created and returned error code 0xC0047067. Make sure that the component is registered correctly.

View 6 Replies View Related

Service Broker Application Is Getting Error + Connection Attempt Failed With Error: '10060

Aug 17, 2007



hi ,
i am creating a service broker application between two different instance.when i am initiating a dialog from the source my message remain in the sys.transmission_queue.but its transmission_status column is empty.

i attached the profiler with both source and target by including all the service broker event.

in my source profiler i am getting the error like -- Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'. with event Broker:connection

and in the target profiler error is --This message could not be delivered because the security context could not be retrieved. with event Broker:Message Undelivarible.

i have checked my port also using telnet with remotely and localy both working fine. i am using port no. 4001
and i have mentioned the port no. in the address of the route.

bt still getiing the error.

please help!!!!!!!!!!!

View 3 Replies View Related

Error When Using Configuration File For Source And Destination Connections In A Data Flow Task

Mar 7, 2008

Hi all,

I have a package that does simple exporting from an excel sheet to a table.
I used a Dataflow task with Excel Source and OLEDB Destination Components.
And i created Package configurations for Source and Destination Components.
After than when i execute the package i get the following error.


Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLLPL_Config2.dtsConfig".

Information: 0x40016041 at ProductDetails_Import: The package is attempting to configure from the XML file "D:TEST_ETLDBCon2.dtsConfig".

SSIS package "ProductDetails_Import.dtsx" starting.

Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.

Error: 0xC0202009 at ProductDetails_Import, Connection manager "Excel Connection Manager": SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.

An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".

Error: 0xC020801C at Data Flow Task, Excel Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.

Error: 0xC0047017 at Data Flow Task, DTS.Pipeline: component "Excel Source" (1) failed validation and returned error code 0xC020801C.

Error: 0xC004700C at Data Flow Task, DTS.Pipeline: One or more component failed validation.

Error: 0xC0024107 at Data Flow Task: There were errors during task validation.

SSIS package "ProductDetails_Import.dtsx" finished: Failure.

The program '[2416] ProductDetails_Import.dtsx: DTS' has exited with code 0 (0x0).

I have been trying to troubleshoot the error message given below from last evening.


I have been trying to troubleshoot the error from last morning.
Counld not figure out what is causing this error to occur.

Please help!!!!
Any pointersSuggestions would be highly appreciated.

Thanks & Regards

View 3 Replies View Related

Server Authentication Error - Login Attempt Failed

Oct 7, 2014

When I am trying to connect my database using SQL Server Authentication option, then its showing error: "An attempt to login suing sql authentication failed. Server is configured only for Windows authentication only."

View 8 Replies View Related

Compare Performance (Execute SQL Task Insert And Data Flow Task)

Mar 12, 2008



I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.

I would like know which method is faster:


Use Execute SQL Task to insert the result set to the target table

Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?

Thanks.

View 7 Replies View Related

Can A Result Set From SQL Script Task Be Used As A Source For Data Flow Task?

Oct 2, 2007

I have a stored procedure that is executed via a sql script task that returns a full result set. I map this result set to a variable or object type. Is there a way to use this variable as a data source in a subsequent data flow task?

A.

View 14 Replies View Related

SQL Server Error (CLR) V2.0.50727 With HRESULT 0x8007000e

Apr 12, 2007

I guys,
I have this store procedure which does a bulk insert to a session table from a XML file. This store procedure used to work fine until couple of month ago and now all of the sudden it stopped working. Whenever this procedure is executed I get following error:
 
Msg 6511, Level 16, State 82, Procedure up_XNetSessionBulkInsert, Line 42
Failed to initialize the Common Language Runtime (CLR) v2.0.50727 with HRESULT 0x8007000e. You may fix the problem and try again later.
I also tested same procedure on the development sql server and it works fine. the settings on the production and development are same.
I was wondering if any of you have a solution for it.   Here is the procedure which causes error.
dbo.up_SessionBulkInsert '<sessions><s id="6" val="45465465" len="9" /></sessions>'
 
 
ALTER PROCEDURE [dbo].[up_SessionBulkInsert]
(
@sessionXml text
)
AS
SET NOCOUNT ON
declare @handle int
exec sp_xml_preparedocument @handle output, @sessionXml
INSERT INTO SessionTb
(
sessionID
,session
,length
)
SELECT
sessionID
,dbo.udf_DecodeBase64StringToBinary(session) as RawBytes -- Base64-decode to byte[] before we insert.
,length
FROM
OpenXml(@handle, '/sessions/s', 1)
WITH
(
sessionID varchar(88) '@id'
,session varchar(max) '@val' -- This value should be a base64-encoded string
,length int '@len'
)
select @@rowcount
exec sp_xml_removedocument @handle
SET NOCOUNT OFF
 
 
 
 

View 11 Replies View Related

Recompile SQL Task With Data Flow Task

Feb 23, 2007

Hi,


I created a package with SQL 2005. The package gets the Access DB and then inserts it into SQL Server.

If I open the package in .NET, I can see the SQL Task and Data Flow Task. The SQL Task has a property sqlstatementsource, which has the necxessary SQL code to create the tables.

How can I tell the SQL Task to recompile the SQL code if I give it another DB name, because the tables differ and don't map in the Data Flow Task


Thanks

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved