The Index Entry For Row ID Was Not Found In Index ID 3, Of Table 357576312
Hi,
I'm running a merge replication on a sql2k machine to 6 sql2k subscribers.
Since a few day's only one of the merge agents fail's with the following error:
The merge process could not retrieve generation information at the 'Subscriber'.
The index entry for row ID was not found in index ID 3, of table 357576312, in database 'PBB006'.
All DBCC CHECKDB command's return 0 errors :confused:
I'm not sure if the table that's referred to in the message is on the distribution side or the subscribers side? A select * from sysobjects where id=357576312 gives different results on both sides . .
Any ideas as to what is causing this error?
View Complete Forum Thread with Replies
Related Forum Messages:
Could Not Find The Index Entry For RID...
Greetings. Today I was testing the sql backup/restore functions on ourprimary server. I was able to backup my database without any problemsbut when I tried to restore it, I received an error "Could not find theindex entry for RID '3610200101a03cc4b49d8bbc84bac50cbe042cecf76' inindex page (1:40), index ID 0, database 'walkthrough'." Thinking thatdata had been corrupted somehow I tried another database and received asimilar error for that database. In the past, our service provider hasattempted to restore data to this server and the restore failed do toanother data corruption. The problem is, I can't find out where thecorruption is located or how to fix it.When I open the restored database in enterprise manager, it returns theabove error and is unable to get a listing of my tables. In queryanalyzer I am able to view my data but receive the index error when Iattempt to look at the information_schema data. When I try to run a DBCCCHECKDB on the corrupted database it reports 0 errors and 0inconsistencies.So my diagnosis of the problem is that something is corrupting my systemtables and that problem shows up whenever I try to restore data from abackup. There could be a hardware failure but I believe the failurewould affect more then just the sql system tables. Can anyone offer anyadvice on how to find the corruption?Thank you in advanceRichard Bailey*** Sent via Developersdex http://www.developersdex.com ***
View Replies !
Advantages Of Using Nonclustered Index After Using Clustered Index On One Table
Hi everyone, When we create a clustered index firstly, and then is it advantageous to create another index which is nonclustered ?? In my opinion, yes it is. Because, since we use clustered index first, our rows are sorted and so while using nonclustered index on this data file, finding adress of the record on this sorted data is really easier than finding adress of the record on unsorted data, is not it ?? Thanks
View Replies !
Index Entry Exceeds The Maximum Length
I'm seeing this error in my application log. Not quite sure how it started happening all of a sudden. I'm not quite sure where to start on this one. Any suggestions greatly appreciated! Thanks, Mike123 Exception information: Exception type: SqlException Exception message: Operation failed. The index entry of length 1007 bytes for the index 'tblMessage25' exceeds the maximum length of 900 bytes.
View Replies !
Clustered Index On Client_ID+ORderNO+OrdersubNo, If I Create 3 Noncluster Index On Said Column Will It Imporve Performance
Dear All. We had Teradata 4700 SMP. We have moved data from TD to MS_SQL SERVER 2003. records are 19.65 Millions. table is >> Order_Dtl Columns are:- Client_ID varchar 10 Order_ID varchar 50 Order_Sub_ID decimal ..... ... .. . Pk is (ClientID+OrderId+OrderSubID) Web Base application or PDA devices use to initiate the order from all over the country. The issue is this table is not Partioned but good HP with 30 GB RAM is installed. this is main table that receive 18,0000 hits or more. All brokers and users are using this table to see the status of their order. The always search by OrderID, or ClientID or order_SubNo, or enter any two like (Client_ID+Order_Sub_ID) or any combination. Query takes to much time when ever server receive more querys. some orther indexes are also created on the same table like (OrderDate, OrdCreate Date and Status) My Question are:- Q1. IF Person "A" query to DB on Client_ID, then what Index will use ? (If any one do Query on any two combination like Client_ID+Order_ID, So what index will be uesd.? How does MS-SQL SERVER deal with these kind of issues.? Q2. If i create 3 more indexes on ClientID, ORderID and OrdersubID. will this improve the performance of query.if person "A" search record on orderNo so what index will be used. (Mind it their would be 3 seprate indexes for Each PK columns) and composite-Clustered index is also available.? Q3. I want to check what indexes has been used? on what search? Q4. How can i check what table was populated when, or last date of update (DML)? My Limitation is i Dont Create a Partioned table. I dont have permission to do it. In Teradata we had more than 4 tb record of CRM data with no issue. i am not new baby in db line but not expert in sql server 2003. I am thank u to all who read or reply. Arshad Manager Database Esoulconsultancy.com (Teradata Master) 10g OCP
View Replies !
Index Was Out Of Range. Must Be Non-negative And Less Than The Size Of The Collection. Parameter Name: Index
Keep getting this error when positioning to the last page of a report. Using Server 2003...SqlRpt Svcs 2000 sp2 Detail error msg: Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. (rrRenderingError) Get Online Help Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index Anyone have any suggestions? Any way to find out what collection is blowing?...or where parameter name: index comes from?
View Replies !
Index Table1 And Select For 647.600 Records.. It Is So Slow.. But I Have No Index :)???
hello friends i have table1 and 200 coulumn of table1 :) i have 647.600 records. i entered my records to table1 with for step to code lines in one day :) i select category1 category2 and category3 with select code but i have just one index.. it is productnumber and it is primarykey..So my select code lines is so slow.. it is 7-9 second.. how can i select in 0.1 second ? Should i create index for category1 and category2 and category3 ? But i dont know create index.. My select code lines is below.. Could you learn me and show me index for it ?? or Could you learn me and show me fast Select code lines and index or etc ??? Also my search code line have a dangerous releated to attaching table1 with hackers :) cheersi send 3 value of treview1 node and childnode and child.childnode to below page.aspx :) Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load If Not Me.IsPostBack Then If Request("TextBox1") IsNot Nothing ThenTextBox1.Text = Request("TextBox1") End If If Request("TextBox2") IsNot Nothing ThenTextBox2.Text = Request("TextBox2") End If If Request("TextBox3") IsNot Nothing ThenTextBox3.Text = Request("TextBox3") End If End If Dim searchword As String If Request("TextBox3") = "" And Request("TextBox2") = "" Then searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "'" End If If Request("TextBox3") = "" Then searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "' and kategori1= '" & Request("TextBox2") & "'" End If If Request("TextBox3") <> "" And Request("TextBox2") <> "" And Request("TextBox1") <> "" Then searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "' and kategori1= '" & Request("TextBox2") & "' and kategori2= '" & Request("TextBox3") & "'" End If SqlDataSource1.SelectCommand = searchword End Sub
View Replies !
Index Internals - Last Time Index Was Rebuilt?
I'm trying to find whether there is a dmv or system view that can help me see the last time an index was rebuilt or created. Assuming I rebuilt an index using tsql commands (not a job with a history), is there a way to find out the last time that index was rebuilt? Thanks much.
View Replies !
Index/performance Index For SELECT.... IN Statement
Hi All, I 'm working to improve some sql performance. One of the major syntax inside the SELECT statment is .. WHERE FIELDA IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='A') AND WHERE FIELDB IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='B') AND WHERE FIELDC IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='C') AND WHERE FIELDD IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='D') AND WHERE FIELDE IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='E') AND WHERE FIELDF IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='F') (It's to compare the field content with some user input parameter inside a parameter table... ) I think properly is that the SELECT ... IN is causing much slowness in the sql statement. I have indexed FIELDA , FIELDB, FILEDC etc and those PARAVALUE and PARATYPE in the PARATABLE table. But perfromance is still slow and execution takes >20 seconds for 200000 rows of records. Do any one know if still any chance to improvide the performance like this? Much Thanks, Andy
View Replies !
Clustered Index Vs. Full Text Index
Quick question about the primary purpose of Full Text Index vs. Clustered Index. The Full Text Index has the purpose of being accessible outside of the database so users can query the tables and columns it needs while being linked to other databases and tables within the SQL Server instance. Is the Full Text Index similar to the global variable in programming where the scope lies outside of the tables and database itself? I understand the clustered index is created for each table and most likely accessed within the user schema who have access to the database. Is this correct? I am kind of confused on why you would use full text index as opposed to clustered index. Thank you Goldmember
View Replies !
Index Scan Vs Index Seek
I have a really strange problem. I execute this query: declare @cid int set @cid = 2003227 select * from sales s, product p where p.product_Id = s.product_Id and customer_id = @cid select * from sales s, product p where p.product_Id = s.product_Id and customer_id = @cid or @cid = 0 3 Million rows in sales, 120000 in product. The first does and index seek, the second an index scan. The execution plan reports that the scan takes 99.87% of the cost, and the seek takes 0.13% This problem obviously gets worse the bigger the dataset / query /etc. The reason I query this, is because it never used to take this long to do index scans. Is there something i can change, something i can fix? Any help would be appreciated. Josh
View Replies !
Simple Query Chooses Clustered Index Scan Instead Of Clustered Index Seek
the query: SELECT a.AssetGuid, a.Name, a.LocationGuid FROM Asset a WHERE a.AssociationGuid IN ( SELECT ada.DataAssociationGuid FROM AssociationDataAssociation ada WHERE ada.AssociationGuid = '568B40AD-5133-4237-9F3C-F8EA9D472662') takes 30-60 seconds to run on my machine, due to a clustered index scan on our an index on asset [about half a million rows]. For this particular association less than 50 rows are returned. expanding the inner select into a list of guids the query runs instantly: SELECT a.AssetGuid, a.Name, a.LocationGuid FROM Asset a WHERE a.AssociationGuid IN ( '0F9C1654-9FAC-45FC-9997-5EBDAD21A4B4', '52C616C0-C4C5-45F4-B691-7FA83462CA34', 'C95A6669-D6D1-460A-BC2F-C0F6756A234D') It runs instantly because of doing a clustered index seek [on the same index as the previous query] instead of a scan. The index in question IX_Asset_AssociationGuid is a nonclustered index on Asset.AssociationGuid. The tables involved: Asset, represents an asset. Primary key is AssetGuid, there is an index/FK on Asset.AssociationGuid. The asset table has 28 columns or so... Association, kind of like a place, associations exist in a tree where one association can contain any number of child associations. Each association has a ParentAssociationGuid pointing to its parent. Only leaf associations contain assets. AssociationDataAssociation, a table consisting of two columns, AssociationGuid, DataAssociationGuid. This is a table used to quickly find leaf associations [DataAssociationGuid] beneath a particular association [AssociationGuid]. In the above case the inner select () returns 3 rows. I'd include .sqlplan files or screenshots, but I don't see a way to attach them. I understand I can specify to use the index manually [and this also runs instantly], but for such a simple query it is peculiar it is necesscary. This is the query with the index specified manually: SELECT a.AssetGuid, a.Name, a.LocationGuid FROM Asset a WITH (INDEX (IX_Asset_AssociationGuid)) WHERE a.AssociationGuid IN ( SELECT ada.DataAssociationGuid FROM AssociationDataAssociation ada WHERE ada.AssociationGuid = '568B40AD-5133-4237-9F3C-F8EA9D472662') To repeat/clarify my question, why might this not be doing a clustered index seek with the first query?
View Replies !
SQLAGENT.exe - Entry Point Not Found
Hi there;I was trying to apply SQL SP3a on my windows 2000 server (SP4), butthe installation failed and when I rebooted my server the SQL agentfailed to start and I get the following error:SQLAGENT.exe - Entry Point Not Foundthe procedure entry point SFMapi0GetProfiles could not be located inthe dynamic link library SEMMAP.dllNow, I tried replying SQLSP3a, but that keeps on failing and I keepgetting this error message.Any Idea .. Please help me.Thank you.
View Replies !
Entry Point Not Found With MS SQL Server
Hi All!Has anyone has seen this error before?Event Type:InformationEvent Source:Application PopupEvent Category:NoneEvent ID:26Date:5/14/2004Time:10:06:45 AMUser:N/ADescription:Application popup: sqlmangr.exe - Entry Point Not Found : Theprocedure entry point TraceMessage could not be located in the dynamiclink library ADVAPI32.dll.This computer is running MS SQL Server STD Edition 2000 W/ ServicePack 1.Thanks!
View Replies !
When To Index A Table Or Not?
I have setup a DTS job that performs the following steps once a week. 1. Truncate a User Table called Sales 2. Import 750,000 new sales records from a semi-colon delimited text file. 3. Execute an update query that adds a SalesID field to each record. (this is a concatenation of several columns for each record and may not be unique) This whole process takes about 2 minutes. Here is my question: all querys and views against this Sales table use the SalesId field to identify a result set. Therefore my thought is that I need Clustered index on the SalesID field in the sales table. What is the right way to handle this: 1. Leave the table as is and do not add an index to the SalesID field. (All queries would rely on file scan of the table) 2. Add a permenat Index to the SalesID field. Which will probably cause the truncate and Import to run more slowly. 3. Do option 2 but drop the index before truncating the table and add the Index back to the SalesId field as the last step in the DTS job. Any idea what would provide the best performance? If I missed any options please let me know, thank you for any help!
View Replies !
Table Index
When considering locks caused by a table, would it be better to have more rows in a table than less? For example, I can design the table to hold 1 million rows that have 300,000 rows that are updated frequently or I can take out 700,000 rows and place them in another table and have the 300,000 rows that remain take a severe beating. Would I have less locking problems and deadlocks if I take out the non-updating rows or would it be more likely to deadlock because of a higher chance of a lock being held on the same page? Thanks, Mike
View Replies !
Table Index
Hello, I have a table as so: ID Field1 Field2 Field3 My ID field is an identity field (unique). It is the primary key. I also want to add an index/unique key so that a combination of Field1 and Field2 can not be duplicated. How do I do this? Many thanks in advance! Mark
View Replies !
Index On #tmp Table?
I have a tmp table created as select row_number() over ( order by duedate) as row , duedate as date, ... into #fronta from oitb with(nolock) where .... order by duedate The table is filled correctly with about 30k records. Now in next step I want to work with this tmp table I created, but I have problem, when I use query like this select * from #fronta where row < 500 When the operator is = or <>, the query is quick, but when I use < or >, the query takes about 10 minutes. I tried to add to this tmp table index on field named row, but with no succes. Have anyone idea how to improve the speed? thanks a lot
View Replies !
Index On Table
Vendor software does not supply primary keys on tables There is a table EMPLOYEE Empl_ID This has create unique, and index selected. As this is unique is this ok to set create as clustered so i get primary key defined. How to change automatically on all tables that have this set. Thanks
View Replies !
To Show Like An Index Table On Every Page That Read From Table, Not Static
Hi, Was wondering if anyone could help. I'm trying to put, kinda like a code index that read from a table (basically just show the index and the description, very simple), to appear on every page. What happen is, in the report body, I have two table properties that read from two different datasets. The one for the index (for my case, I put in on the right side of the report), I need it to appear on every page, but just can't figure out how to do it. I tried to put the index on the Header or Footer section (not static text), but I guess you are not allowed or can't put subreport in there. Is there any other trick to do this? I saw something in the Help about RepeatWith .. anybody know how or what this can do? Any help will be very much appreciated. Thanks in advance. Isham Hamin
View Replies !
Can You Add An Index To A Table Variable?
Hi,I've got 2 table variables inside of an SQL 2000 function:@tmpBigList(BItemID, BRank)@tmpSmallList (ItemID, Rank)The following UPDATE statement can run for a long time if @TmpTable1has 500 rows and @TmpTable2 has 35,000 rows.UDPATE @tmpBigListSET BRank = t.RankFROM @tmpBigListJOIN @tmpSmallList t on t.ItemID = BItemIDLooking at the Query Plan, you see that the INNER JOIN Of @tmpBigListto @TmpSmallList results in 500 * 35,000 = 17,500,000 rows beingreturned from @TmpSmallList. That takes a long time.An index would help, but it appears that you can't add an index to atable variable.Changing to a temp table does not work since it's in a function.Thanks,Joe Landes
View Replies !
Clustered Index On A VERY Big Table
I already posted this over on sqlteam so don't peek there if you haven't seen that post yet. :) So now to the question: Anyone care to guess how long it took me to build a clustered index on a table with 900 million rows? This is the largest amount of data in a single table I have had to work with thus far in my career! It's sorta fun to work with such large datasets. :) Some details: 1. running sql 2005 on a dual proc 32bit server, 8gb ram, hyperthreaded, 3ghz clock. disk is a decent SAN, not sure of the specs though. 2. ddl for table: CREATE TABLE [dbo].[fld]( [id] [bigint] NOT NULL, [id2] [tinyint] NOT NULL, [extid] [bigint] NOT NULL, [dd] [bit] NOT NULL, [mp] [tinyint] NOT NULL, [ss] [tinyint] NOT NULL, [cc] [datetime] NOT NULL, [ff] [tinyint] NOT NULL, [mm] [smallint] NOT NULL, [ds] [smallint] NOT NULL ) 3. ddl for index (this is the only index on the table): CREATE CLUSTERED INDEX [CIfld] ON [dbo].[fld] ( extid asc )WITH (FILLFACTOR=100, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF) 4. extid column was not sorted to begin with. ordering was completely random. Note that I have changed the column names, etc, to protect the innocent. I can't go into details about what it's for or I'd be violating NDA type stuff.
View Replies !
Index A View Or A Table
I have a table that has thousands of rows inserted daily (rows are seldom updated or deleted) The table is also involved in frequent non-simple select statements. It currently has about a million rows. Out of the 15 odd columns in the table, I can see about 6 that would benefit being indexed to speed up the select statements. Before I do this, I was wondering if people think that perhaps I should create an indexed view that all select statements use, rather than adding indexes directly to the table. Can anyone advise me the performance benefits/disadvantages of indexed views over indexed tables? Thanks
View Replies !
Index On A Table Variable (SQL 2K)
I am creating a table variable (@tblBin) to temporarily store a set of data. Later in my sproc, I am doing a JOIN from @tblBin to a persistent table. In order to improve performance, I was thinking of adding an index to the columns of the @tblBin (indexes already exist on the persistent table). Using standard CREATE INDEX syntax(*), I am getting a compile error. Can this be done? (*)CREATE NONCLUSTERED INDEX IX_tblBin_shortname ON @tblBin(shortname) TIA ... Regards, ~DLDay
View Replies !
SUM Uses Table Scan But Not Index
Hi I'm issuing a SELECT on a field with the SUM on SQL Server 7. I have an index on the field in the WHERE clause but upon analysis, the Query Optimizer always uses a Full Table Scan. Can anyone explain why and is there a way to use the index. HEre's the structure: SELECT SUM(colA) FROM TABLE tblB GROUP BY colC An index exists on column colC. Thanks
View Replies !
Table And Index Partition
I am trying to understand how table partitioning works. I have Database with 5 Filegroups. Database contains one Table which is partitioned. Filegroups Primary FG1 €“ used for Partition FG4 €“ used for Partition FG3 €“ used for Partition FGINDEX - used for Index There are no Primary Keys on my table but it does contain a clustered index (created on FGINDEX). When I insert records into my table, my partitioned Filegroup does not grow, however my Index filegroup does grows. However when I do a search on my partition it shows that my Partitioned Filegroup contains data. I have a feeling that all the data is being inserted in to my index filegroup (FGINDEX). Also if I change the alter the index into nonclustered my Data file group grows, however the Index filegroup is always bigger than the data filegroup. I am including the code for your review. Thx --------------------------------------------------------- -- Create DB USE [master] GO CREATE DATABASE [TestPart] ON PRIMARY ( NAME = N'TestPartPrimary', FILENAME = N'C:TestPart_Primary.MDF' , SIZE = 1024KB , MAXSIZE = 5120KB , FILEGROWTH = 1024KB ), FILEGROUP [FG1] ( NAME = N'FG1', FILENAME = N'C:FG1.ndf' , SIZE = 1024KB , MAXSIZE = 5120KB , FILEGROWTH = 1024KB ), FILEGROUP [FG2] ( NAME = N'FG2', FILENAME = N'C:FG2.ndf' , SIZE = 1024KB , MAXSIZE = 5120KB , FILEGROWTH = 1024KB ), FILEGROUP [FG3] ( NAME = N'FG3', FILENAME = N'C:FG3.ndf' , SIZE = 1024KB , MAXSIZE = 5120KB , FILEGROWTH = 1024KB ), FILEGROUP [FGINDEX] ( NAME = N'FGINDEX', FILENAME = N'C:FGINDEX.ndf' , SIZE = 1024KB , MAXSIZE = 5120KB , FILEGROWTH = 1024KB ) LOG ON ( NAME = N'TestPart_Log', FILENAME = N'C:TestPart_Log.LDF' , SIZE = 2048KB , MAXSIZE = 10240KB , FILEGROWTH = 1024KB ) COLLATE Latin1_General_CI_AS GO ---------------------------------------------------------- -- Create PARTITION CREATE PARTITION FUNCTION myRangeF1 (int) AS RANGE LEFT FOR VALUES (50 , 100) CREATE PARTITION SCHEME myRangeS1 AS PARTITION myRangeF1 TO (FG1, FG2, FG3) ---------------------------------------------------------- -- Create Table USE [TestPart] GO SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[My_tbl]( [ID] [int] NULL, [myDate] [datetime] NULL CONSTRAINT [DF_My_tbl_myDate] DEFAULT (getdate()), [PartID] [int] NULL ) ON [FGINDEX] ---------------------------------------------------------- -- Create Index USE [TestPart] GO CREATE CLUSTERED INDEX [IX_My_tbl_PartID] ON [dbo].[My_tbl] ([PartID] ASC) WITH (PAD_INDEX = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF) ON [FGINDEX] ---------------------------------------------------------- -- Insert Data SET NOCOUNT ON declare @mcount as int declare @mdate as datetime set @mcount = 1000000 set @mdate = getdate() while @mcount > 0 begin insert into dbo.My_tbl values(0,@mdate,0) set @mcount = @mcount - 1 end SET NOCOUNT OFF ---------------------------------------------------------- -- Search PARTITION SELECT $PARTITION.myRangeF1(ID) AS Partition, COUNT(*) AS [COUNT] FROM My_Tbl GROUP BY $PARTITION.myRangeF1(ID) ORDER BY Partition ---------------------------------------------------------
View Replies !
Inserting In A Table With Index...?
In the table that i will insert rows, there are columns: Col1 Col2 Col3 Col4 Col5 an there's an index for (Col2,Col3,Col4) So, Col1 Col2 Col3 Col4 Col5 ---------- ------------------- ------------- ---------- ----------------- 0 30082006 'TERM1' 1 7 1 30082006 'TERM1' 1 7 this is not allowed because of the index for (Col2,Col3,Col4).Col4 must be different from 1. I can see only one way to insert into this table.. SELECT @max_col4= max(Col4) FROM TABLEXXX WHERE Col2=30082006 AND Col3='TERM1' INSERT INTO TABLEA(Col2,Col3,Col4,Col5) VALUES (30082006,'TERM1',(@max_col4+1),7) this is right with only one client....but if there are more than one,possibly two clients can try to insert to the table.When one of them gets the max_Col4,lets say it got 89.At the same time,another client started the process and it got 89,too..but after the first client inserted the row, then max_Col4 will be 89.However the second client will still try to insert with Col4 as 89......namely, it will boom... There must be another method to achieve that job..but what is it...??? I wish I could be able to explain my problem.... Thanks in advance..
View Replies !
Index On Partition Table
Hi all, My question is about Indexs on partition where I have a table with say 5 partitions and I want to create index on partitions and not on the whole table. The objective is that if i create a table level index on a partition table and eventually if I drop one of the partition or add another partition, what will happen to the index? 1) Do I need to re-create the index for the partion which are left after deleting one partition? 2) If a partition is added do I need re-create the index for the whole table or just create the index for that particular new partition? Let me know if there is any white paper or code available. I have gone through the white paper published "SQL Server 2005" Partitioned Tables and Indexes Author: Kimberly L. Tripp, Founder, SQLskills.com
View Replies !
Table,index Partitioning
We had data in tables for multiple users (Logins) .Each user data is identified by a one column named €œUSER€?. No user has direct access to tables and only through views .we have created views and stored proc .Views will perform DML operations on tables using condition WHERE USER=SUSER_SNAME() (i.e Logged in user).So no point of getting others user data. Each table has a column USER and we are queering data based on login user .this is the foreign key of USER table. Each view contains user column in where clause .So for every query we are searching all records .instead of that is there any way to get data with out searching all records. I heard about table Partitioning, index Partitioning, view Partitioning. Are they helpful to boost my query performance? And also let me know is there any good way of designing apart from above options
View Replies !
Table/Index Onitoring
Is there a way to track tables/indexes/stored procedures that are being used? I know that the Profiler can do this but I am looking for a way to query a system table to get this information. Oracle has a way to turn on/off monitorint for tables and indexes so I was wondering if this info is avaialble and if so if something needs to be done to activate the collection of the info. Thanks
View Replies !
Creating Index On Table...
Hi i am new to using this sql server 2000....this is a very simple question to all u guys.....i am just in a learning stage...so any help from u guys is really appreciable.... i need to create a table customers with the following columns... identity column to self-populate as the primary key, joindate, leavedate, custcode, empID. This is the one i tried: create table customers (id int primary key identity (1,1) not null, joindate smalldatetime null, leavedate smalldatetime null, custcode varchar (10) not null, empid int not null ) is tht code correct only??? and i also want the below one : Create indexes on the leavedate, custcode and empid columns. how to create these indexes??? and wht happens when i create them(like is thr any advantage of creating indexes???) thanks......
View Replies !
Which Index A Table Is Using In T-sql 2000
On one of those common interview question lists, there is the question: How do you know which index a table is using? The two answers that I've found are: SELECT * FROM user_constraints --and SELECT TableName,IndexName FROM user_constraints Both of these return the error: Server: Msg 208, Level 16, State 1, Line 1 Invalid object name 'user_constraints'. Is this because I'm using the free version of 2000(MSDE)? If so, what is the right answer for this version? -Thanks
View Replies !
How To Create Index On Table Variable (Table Don't Have Primary Key)
Hi all, my stored procedure have one table variable (@t_Replenishment_Rpt).I want to create an Index on this table variable.please advise any of them in this loop... below is my table variable and I need to create 3 indexes on this... DECLARE @t_Replenishment_Rpt TABLE ( Item_Nbr varchar(25) NULL, Item_Desc varchar(255) NULL, Trx_Date datetime NULL, Balance int NULL, Trx_Type char(10) NULL, Issue_Type char(10) NULL, Location char(25) NULL, Min_Stock int NULL, Order_Qty int NULL, Unit char(10) NULL, Issue_Qty int NULL, Vendor varchar(10) NULL, WO_Nbr varchar(10) NULL, Lead_Time int NULL, PO_Nbr char(10) NULL, PO_Status char(10) NULL, Currency char(10) NULL, Last_Cost money NULL, Dept_No varchar(20) NULL, MSDSNbr varchar(10) NULL, VendorName varchar(50) NULL, Reviewed varchar(20) NULL ) I tryed all below senarios...it is giving error... --Indexing the @t_Replenishment_Rpt table on the column Names Item Number, Vender , Department Number --EXEC sp_executesql(CREATE UNIQUE CLUSTERED INDEX Replenishment_index ON @t_Replenishment_Rpt (Item_Nbr)) --CREATE UNIQUE CLUSTERED INDEX Idx1 ON @t_Replenishment_Rpt.Item_Nbr INDEX_COL ( '@t_Replenishment_Rpt' , ind_Replenishment_id , Item_Nbr ) --EXEC sp_executesql('SELECT INDEXPROPERTY('+ '@t_Replenishment_Rpt' + ', ' + 'Item_Nbr' + ',' + 'IsPadIndex' + ')') --EXEC sp_executesql(SELECT INDEXPROPERTY('@t_Replenishment_Rpt', 'Vendor','IsPadIndex')) --EXEC sp_executesql(SELECT INDEXPROPERTY('@t_Replenishment_Rpt', 'Dept_No','IsPadIndex'))
View Replies !
Select Single Entry Found In All Rows (access2k)
I have to write a statement that answers the question: "Which pilot is authorized to fly all the aircraft in the fleet?" implying that the individual aircraft could be of any of the three aircraft types. Below are the tables with notation Tbl_name (important keys [clarification of keys]): personnel (pers_id, name, crew_role [eg. pilot, stewardess]), aircraft (craft_id, type_designation [eg. Boeing737], craft_name [eg. The Viking, Icarus]), aircraft_type (type_designation), and authorization (pers_id, type_designation). In words my question should be something like: "For all those who are authorized to fly aircraft (the only pers_id:s listed in the authorization table), show the names of those that have their pers_id:s next to all aircraft_type:s." I've gotten this far: Code: SELECT DISTINCT p.name FROM personnel AS p, authorization AS b, aircraft_type AS f WHERE p.pers_id = b.pers_id AND b.type_designation = ... ; Now what I want to accomplish is to select the pilot which has a record for ALL type_designation entries in the aircraft_type table. Is there a magic keyword that I don't know of? Is that magic keyword called "EXIST" and how do I use it? Best regards, rod
View Replies !
CREATE INDEX On Large Table
SQL Server 7/2000: We have reasonably large tables (3,000,000 rows)that we need to add some indexes for. In a test, it took over 12 hoursto CREATE a new INDEX against this table. One of us suggested that wecreate a temp table with the new index and copy the data from the oldtable into the new one, then rename it. I understand this took 15minutes. Why the heck would it be faster to move the data and buildmultiple indexes incrementally vs adding an index??
View Replies !
Table/index And Page Mapping
I've just found a blocking lock occuring in a SQL Server.[color=blue]>From the waitresource, I found that the blocker has the following[/color]information:wait_info: PAGEIOLATCH_EXwait_resource: 14:1:564312And the blockee has the following information:wait_info: LCK_M_Swait_resource: KEY: 14:405576483:2 (7501a5aa8355)The problem is that I do not know which object is the blocker holding,for I understand that for a PAGE lock, it is in the format ofdatabase_id:file_id:page_idI know the db_id, the file_id but don't know how to map the page_id(564312) to a table/index in the database.Can somebody shed some lights on this? thks a lot.
View Replies !
Index Corruption On Table Without Key: What Could Be The Reasons ?
Dear group,we are running a SQL-Server Database which is about 30 GB large. Thepurpose of this database is to contain periodic data from automaticdevices which insert values into some tables.Unfortunately most of these tables don't have a key (and a key can onlybe introduced when the application programmers have changed theirsoftware). Tables have this structuredeviceno timestamp datawhere we expect for every device and timestamp one row of data.In the ongoing operation it happens that the index of this large tablegets corrupted and a select from this table yields 2 rows for somedevices.In fact a select "SELECT DEVICENO, TIMESTAMP, COUNT(*) FROM TABLE GROUPBY DEVICENO, TIMESTAMP HAVING COUNT(*) > 1" returns lots of data.After rebuild of the indexes the table is "clean" again.What could cause the index corruption ?Missing key?Faulty application program ?a combination of both ?How can i prevent this from happening again, as long as there is noupdated database / application ?I'd be grateful for any useful commentRegardsUli
View Replies !
Unique Index For Two Columns In A Table
Hi,I would like to add a unique index that consists of two fields in atable.e.g. tbl_A (field1,field2) -- field1 & field2 Indexed and combinationmust be Unique.Can anyone tell me the actual sql syntax to create this index?Thanks,June.
View Replies !
Locating A Table Using Index Page
Hello,I not exactly sure how to determine the table when given the followinginformation:--Could not find the index for RID '999999' in index page('1:99999999'), index id ), database (whatever).--Can you someone tell how I use the system tables to determine whattable this index corresponds to? I'm assuming I used sysindexes andsysobjects somehow.Thanks in advance,JGB_DBA
View Replies !
|
TRACKER
