I have the following stored proc that I need to pull InsuranceID specific rows when @InsuranceID > 0 is sent. Below is the code and I think the issue is in the 2nd WHERE condition.
ALTER PROCEDURE [dbo].[ms_selJobSetupSelections]
(@ActiveOnlybit = 1,
@InsuranceIDint = 0)
AS
BEGIN
SELECT J.JobSetupID
,J.JobSetupText
[code]....
I have the below data and want to only show records where Response Column has Max date for the commencement date and expiry date under questions column.. For example for tenantcode 52090 the highest Tab value is 2 but this is not correct as there is no associated value in response.
We need to compare all the commencement and lease expiry dates and show only the commencement and lease expiry with the recent dates. Null should be ignored Instead of using Max Tab or Max Modified date would the below logic work? Not sure how to script this.
1. Filter to find Questions containing "Expiry Date"
2. summarise to find the max expiry date per Tenant Code
3. find which records have that maximum expiry
4. join again to find the commencement date
5. union the records from (3) and (4)
6. cross tab
Declare @rent Table
(
TenantCode CHAR(6)
,HHMID CHAR(5)
,Tab CHAR(4)
,FieldNo CHAR(4)
,FieldRowCHAR(10)
[code]....
(select SUM(sales.Total) from sales where StudentHist.Curdate = max(sales.curdate))  AS 'Balance'Iam trying to write a subquery to  calculate the total amount of sales until the Curdate  in studenthist equals the Curdate in sales table..how to write this query??
View 11 Replies View Relatedwith c1 As (
select 1 As '1' , 2 Â As '2' , 3 As '3'
)Â
, c2 As (
select 4 Â As '4', 5 Â As '5', Â 6 As '6'
union all
select 1 , 2 ,3 from c1 Â -- >>>>> Â select from c1 hereÂ
) select * from c2Â
 union all
 select * from c1 -- >>>>>> and select from c1 hereÂ
According to the query above , I try to reuse the subquery by put  the subquery into 'with cte'  name (c1)  then i select this  2 times .
if I do this way , how many time this subquery (c1) execute ?
if 1 time then this is the right way to reuse this subquery .
if 2 times  , it is not then what should i do to reuse this subquery ?
I have a table which is called PneumoniaCareBundleDiagnosisCodes with the fields DiagnosisCode, DiagnosisDesc
I have a another table called dbo_OP_APPOINTMENT_PROCEDURE_PIVOT
With fields Procedure01, Procedure02, Procedure03, Procedure04, Procedure05, Procedure06, Procedure07, Procedure08, Procedure09, Procedure10, Procedure11, Procedure12.
(for info purposes the relationship here is DiagnosisCode = Procedure01, 02, 03 etc)
Is it possible to right a query that shows all records in dbo_OP_APPOINTMENT_PROCEDURE_PIVOT where the DiagnosisCode in table PneumoniaCareBundleDiagnosisCodes appear in any of the Procedure01, 02, 03 fields etc.
If I was using an IF statement the logic i would right it as follows:
IF dbo_OP_APPOINTMENT_PROCEDURE_PIVOT.Procedure01
IS IN PneumoniaCareBundleDiagnosisCodes.DiagnosisCode OR
IF dbo_OP_APPOINTMENT_PROCEDURE_PIVOT.Procedure02
[Code] ......
I am writing below query to pull from customer table.
select * from Customer where SrNo in (Select distinct SrNo from Orders)
This is doing an exact match of SrNo in Orders table SrNo is part of string and can occur at any place in that string. I want to use the like command.
Please see below example.
select
*
from Customer
where SrNo
like('%89898989%','%928hhst%')
SELECT A.EmpId,A.IncidentDate
FROM EmployeePoints1 as A
WHERE IncidentDate=
(SELECT MAX(IncidentDate)
FROM EmployeePoints1
WHERE EmpId = A.EmpId) AND (DATEADD(day,28,DATEADD(WEEK, DATEDIFF(WEEK, 0,A.IncidentDate), 0)) < DATEADD(WEEK, DATEDIFF(WEEK, 0,GetDate()), 0)) AND (A.IncidentCode = 'I' OR A.IncidentCode = 'A')
LEFT JOIN EmployeeTotalPoints1 ON EmployeeTotalPoints1.EmpId = A.EmpId
I am trying to left join another table but I got
Incorrect syntax near the keyword 'LEFT'.
SSMS does not like mine! Â THis is the error that I receive:
Cannot perform an aggregate function on an expression containing an aggregate or a subquery.
And this is my syntax:
Select
employeeID
,COUNT(case when rehirestatus IN (select rehirestatus from regionalemptable where rtrim(storename) = 'Location1') THEN userID ELSE 0 END) +
COUNT(case when rehirestatus IN (select rehirestatus from globalemptable where rtrim(storename) = 'Location1') Then userID ELSE 0 End)
FROM production
GROUP BY employeeID
ORDER BY employeeID
I have a subquery i wanted to add a as a fourth column to my  Original Query(is the one below the subquery). How to combine the two queries to one statement?? I tried but was getting an error "Subquery returned more than 1 value "
select Â
COUNT(*)FreeReduced
 from students s join Buildings b on
 s.Building_ID = b.Building_ID
 where s.Activeness =1 and (Eligibility = 3 or Eligibility =2)Â
 group by building_number,Building_Name
[Code] ....
I have the following query.
SELECT a.Line_Number as Line_Number,
Cast(a.election_effective_date as DATE) as election_effective_date,
Cast(a.Plan_Year_Effective as DATE) as Plan_year_Effective
FROM (SELECT aa.* FROM TEMP_Validation aa WHERE IsDate(aa.Plan_Year_Effective) = 1 AND IsDate(aa.election_effective_Date) = 1) a
Where Cast(a.election_effective_date as Date) Not Between Cast(a.plan_year_effective as Date)
and DATEADD(DD,-1,DATEADD(YY,1,Cast(a.plan_year_effective as Date)))
There is a malformed date in the Temp data, at line 4932. This is why I created a subquery that checks if the plan year and election effective dates are dates using the "IsDate" function. However, when I execute this I get the error "Conversion failed when converting date and/or time from character string". If I eliminate line 4932 the error no longer occurs. Somehow line 4932 is not being eliminated in the subquery, except if I run JUST the subquery it will not include line 4932. What am I doing wrong on these queries and how can I correctly get the subquery to eliminate the malformed date?
When I execute the below queries it works perfectly where as my expectation is, it should break.
Select * from ChildDepartment C where C.ParentId IN (Select Id from TestDepartment where DeptId = 1)
In TestDepartment table, I do not have ID column. However the select in sub query works as ID column exists in ChildDepartment.  If I do change the query to something below then definately it will break -
Select * from ChildDepartment C where C.ParentId IN (Select D.Id from TestDepartment D where D.DeptId = 1)
Shouldn't the default behavior be otherwise? It should throw error if column doesnt exists in sub query table and force me to define the correct source table or alias name.
create table TestDepartment
(
DeptId int identity(1,1) primary key,
name varchar(50)
)
create table ChildDepartment
(
Id int identity(1,1) primary key,
[Code] ....
updating the # of Payer from below query to match with the # of rows for each payer record. See the Current and desired results below. The query is currently counting the # of rows for all payers together and updating 3 as # of payers. I need it to count # of rows for each payer like shown inDesired result below. It should be showing 1 for first payer and 2 for 2nd & 3rd based on # of times each payer is repeated..
SELECT b.FILING_IND, b.PYR_CD, b. PAYER_ID, b. PAYER_NAME,a.CLAIM_ICN,
(Select Count(*) From MMITCGTD.MMIT_CLAIM a, MMITCGTD.MMIT_TPL b , MMITCGTD.MMIT_ATTACHMENT_LINK c where a.CLAIM_ICN_NU =
c.CLAIM_ICN and b.TPL_TS = c.TPL_TS and a.CLAIM_TYPE_CD = 'X'Â
[Code] ....
Current Result
FILING_IND
PYR_CD
PAYER_ID
PAYER_NAME
CLAIM_ICN
#_OF_PAYER
[code]....
I have 3 tables.
Table 1:
ID  Name  Description
1  ABc    xyz
2 Â ABC Â Â Â XYZ
Table 2:
RoleID Â Role
1 Â Â Â Â Admin
2 Â Â Â Â QA
Table 3:
ID Â RoleID Â Time
1 Â Â 1 Â Â Â Â 09:14
2 Â Â 1 Â Â Â Â 09:15
1 Â Â 2 Â Â Â Â 09:16
Now I want all the records which belongs to RoleID 1 but if same ID is belongs to RoleID 2 than i don't want that ID.From above tables ID 1 belongs to RoleID 1 and 2 so i don't want ID 1.
Below is the query in which i want to retrieve another column (exchange rate) from a particular date for the sub query.Â
Actually PurchaseOrderDet table get records related to purchaseorder but for each row in purchaseorderdet need info from the same table for all rows on a particular date.
how i can achieve this query without using RANK() and other functions.
"SELECT  Supplier.Uniid AS SupplierID, Supplier.Name, PurchaseOrder.Uniid AS PurchaseID, PurchaseOrder.OrderNo, PurchaseOrder.FormDate, StockItem.Uniid AS StockID, StockItem.StockCode + N' - ' + StockItem.Description1 AS StockItem,
PurchaseOrderDet.ExchangeRate, PurchaseOrderDet.UnitPrice, PurchaseOrderDet.Discount, SUM(PurchaseOrderDet.OrderQty) AS SumOfOrderQty,
[Code] ....
hello friends.. I am newbie for sql server...I having a problem when executing this procedure .... ALTER PROCEDURE [dbo].[spgetvalues] @Uid intASBEGIN SET NOCOUNT ON; select DATEPART(year, c.fy)as fy, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1% JRF' ) as survivorship, (select contribeamount from wh_contribute where and contribename like 'Gross Earnings' and ) as ytdgross, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1.5% JRP') as totalcontrib, from wh_contribute c where c.uid=@Uid Order by fy Asc .....what is the wrong here?? " Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."please reply asap...
View 1 Replies View RelatedI am getting 2 resultsets depending on conditon, In the secondconditon i am getting the above error could anyone help me..........CREATE proc sp_count_AllNewsPapers@CustomerId intasdeclare @NewsId intset @NewsId = (select NewsDelId from NewsDelivery whereCustomerId=@CustomerId )if not exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count( NewsPapersId) from NewsPapersendif exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count(NewsDelId) from NewsDelivery whereCustomerid=@CustomeridendGO
View 3 Replies View RelatedI am getting an error as
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
while running the following query.
SELECT DISTINCT EmployeeDetails.FirstName+' '+EmployeeDetails.LastName AS EmpName,
LUP_FIX_DeptDetails.DeptName AS CurrentDepartment,
LUP_FIX_DesigDetails.DesigName AS CurrentDesignation,
LUP_FIX_ProjectDetails.ProjectName AS CurrentProject,
ManagerName=(SELECT E.FirstName+' '+E.LastName
FROM EmployeeDetails E
INNER JOIN LUP_EmpProject
ON E.Empid=LUP_EmpProject.Empid
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid = LUP_FIX_ProjectDetails.Projectid
WHERE LUP_FIX_ProjectDetails.Managerid = E.Empid)
FROM EmployeeDetails
INNER JOIN LUP_EmpDepartment
ON EmployeeDetails.Empid=LUP_EmpDepartment.Empid
INNER JOIN LUP_FIX_DeptDetails
ON LUP_EmpDepartment.Deptid=LUP_FIX_DeptDetails.Deptid
AND LUP_EmpDepartment.Date=(SELECT TOP 1 LUP_EmpDepartment.Date
FROM LUP_EmpDepartment
WHERE EmployeeDetails.Empid=LUP_EmpDepartment.Empid
ORDER BY LUP_EmpDepartment.Date DESC)
INNER JOIN LUP_EmpDesignation
ON EmployeeDetails.Empid=LUP_EmpDesignation.Empid
INNER JOIN LUP_FIX_DesigDetails
ON LUP_EmpDesignation.Desigid=LUP_FIX_DesigDetails.Desigid
AND LUP_EmpDesignation.Date=(SELECT TOP 1 LUP_EmpDesignation.Date
FROM LUP_EmpDesignation
WHERE EmployeeDetails.Empid=LUP_EmpDesignation.Empid
ORDER BY LUP_EmpDesignation.Date DESC)
INNER JOIN LUP_EmpProject
ON EmployeeDetails.Empid=LUP_EmpProject.Empid
AND LUP_EmpProject.StartDate=(SELECT TOP 1 LUP_EmpProject.StartDate
FROM LUP_EmpProject
WHERE EmployeeDetails.Empid=LUP_EmpProject.Empid
ORDER BY LUP_EmpProject.StartDate DESC)
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid=LUP_FIX_ProjectDetails.Projectid
WHERE EmployeeDetails.Empid=1
PLEASE HELP.................
Hi,
I've running the below query for months ans suddenly today started getting the following error :"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."
Any ideas as to why??
SELECT t0.DocNum, t0.Status, t0.ItemCode, t0.Warehouse, t0.OriginNum, t0.U_SOLineNo, ORDR.NumAtCard, ORDR.CardCode, OITM_1.U_Cultivar,
RDR1.U_Variety,
(SELECT OITM.U_Variety
FROM OWOR INNER JOIN
WOR1 ON OWOR.DocEntry = WOR1.DocEntry INNER JOIN
OITM INNER JOIN
OITB ON OITM.ItmsGrpCod = OITB.ItmsGrpCod ON WOR1.ItemCode = OITM.ItemCode
WHERE (OITB.ItmsGrpNam = 'Basic Fruit') AND (OWOR.DocNum = t0.DocNum)) AS Expr1, OITM_1.U_Organisation, OITM_1.U_Commodity,
OITM_1.U_Pack, OITM_1.U_Grade, RDR1.U_SizeCount, OITM_1.U_InvCode, OITM_1.U_Brand, OITM_1.U_PalleBase, OITM_1.U_Crt_Pallet,
OITM_1.U_LabelType, RDR1.U_DEPOT, OITM_1.U_PLU, RDR1.U_Trgt_Mrkt, RDR1.U_Wrap_Type, ORDR.U_SCCode
FROM OWOR AS t0 INNER JOIN
ORDR ON t0.OriginNum = ORDR.DocNum INNER JOIN
RDR1 ON ORDR.DocEntry = RDR1.DocEntry AND t0.U_SOLineNo - 1 = RDR1.LineNum INNER JOIN
OITM AS OITM_1 ON t0.ItemCode = OITM_1.ItemCode
WHERE (t0.Status <> 'L')
Thanks
Jacquues
Hi guys,
A have a problem that I need understand.... I have 2 server with the same configuration...
SERVER01:
-----------------------------------------------------
Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)
Mar 27 2006 11:51:52
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
sp_dboption 'BB_XXXXX'
The following options are set:
-----------------------------------
trunc. log on chkpt.
auto create statistics
auto update statistics
********************************
SERVER02:
-----------------------------------------------------
Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)
Mar 27 2006 11:51:52
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
sp_dboption 'BB_XXXXX'
The following options are set:
-----------------------------------
trunc. log on chkpt.
auto create statistics
auto update statistics
OK, the problem is that if a run the below query in server01, i get error 512:
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
But, if run the same query in the server02, the query work fine -.
I know that I can use IN, EXISTS, TOP, etc ... but I need understand this behavior.
Any idea WHY?
SELECT dbo.opf_saldo_ctb_opc_flx.dt_saldo,
dbo.opf_saldo_ctb_opc_flx.cd_indice_opf,
dbo.opf_saldo_ctb_opc_flx.cd_classificacao,
dbo.opf_movimento_operacao.ds_tipo_transacao ds_tipo_transacao_movimento ,
dbo.opf_header_operacao.ds_tipo_transacao ds_tipo_transacao_header,
'SD' ds_status_operacao,
dbo.opf_header_operacao.ds_tipo_opcao ,
dbo.opf_header_operacao.id_empresa,
dbo.opf_saldo_ctb_opc_flx.ic_empresa_cliente,
0 vl_entrada_compra_ctro ,0 vl_entrada_compra_premio,
0 vl_entrada_venda_ctro , 0 vl_entrada_venda_premio,
0 vl_saida_compra_ctro, 0 vl_saida_compra_premio,
0 vl_saida_venda_ctro, 0 vl_saida_venda_premio,
0 vl_lucro , 0 vl_prejuizo, 0 vl_naoexec_contrato,
0 vl_naoexec_premio,
sum(dbo.opf_saldo_ctb_opc_flx.vl_aprop_ganho) vl_aprop_ganho,
sum(dbo.opf_saldo_ctb_opc_flx.vl_aprop_perda) vl_aprop_perda,
sum(dbo.opf_saldo_ctb_opc_flx.vl_rever_ganho) vl_rever_ganho,
sum(dbo.opf_saldo_ctb_opc_flx.vl_rever_perda) vl_rever_perda,
sum(dbo.opf_saldo_ctb_opc_flx.vl_irrf) vl_irrf
FROM dbo.opf_saldo_ctb_opc_flx,
dbo.opf_header_operacao ,
dbo.opf_movimento_operacao
WHERE dbo.opf_saldo_ctb_opc_flx.dt_saldo = '6-29-2007 0:0:0.000'
and ( dbo.opf_header_operacao.no_contrato = dbo.opf_saldo_ctb_opc_flx.no_contrato )
and ( dbo.opf_header_operacao.no_contrato = dbo.opf_movimento_operacao.no_contrato )
and ( dbo.opf_movimento_operacao.dt_pregao = (select (o.dt_pregao) from dbo.opf_movimento_operacao o
where o.no_contrato = dbo.opf_movimento_operacao.no_contrato and o.dt_pregao <='6-28-2007 0:0:0.000' ) )
and (dbo.opf_saldo_ctb_opc_flx.ic_tipo_saldo = 'S')
group by dbo.opf_saldo_ctb_opc_flx.dt_saldo,
dbo.opf_saldo_ctb_opc_flx.cd_indice_opf,
dbo.opf_saldo_ctb_opc_flx.cd_classificacao,
dbo.opf_movimento_operacao.ds_tipo_transacao,
dbo.opf_header_operacao.ds_tipo_transacao ,
ds_status_operacao,
dbo.opf_header_operacao.ds_tipo_opcao ,
dbo.opf_header_operacao.id_empresa,
dbo.opf_saldo_ctb_opc_flx.ic_empresa_cliente
Thanks
Nilton Pinheiro
I am trying to add the results of both of these queries together:
The purpose of the first query is to find the number of nulls in the TimeZone column.
Query 1:
SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename
The purpose of the second query is to find results in the AAST, AST, etc timezones.
Query 2:
SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')
Note: both queries produce a whole number with no decimals. Ran individually both queries produce accurate results. However, what I would like is one query which produced a single INT by adding both results together. For example, if Query 1 results to 5 and query 2 results to 10, I would like to see a single result of 15 as the output.
What I came up with (from research) is:
SELECT ((SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename) + (SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST'))
I get a msq 102, level 15, state 1 error.
I also tried
SELECT ((SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename) + (SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')) as IVR_HI_n_AK_results
but I still get an error. For the exact details see:
[URL]
NOTE: the table in query 1 and query 2 are the same table. I am using T-SQL in SQL Server Management Studio 2008.
Hi and thanks in advance for the help.
Here's what I'm trying to do, I need to select all the rows from one table, and only 1 row from a related table.
Table setup
Table1:
Field 1 = PK Ident
Table2:
Field1 = FK ident
I need to select all the rows that exist in Table 1, and I need 1 row out of table2 where Field1 is equal to the Table1.Field1 value (multiple records in table2 will exist with that same value.) I need the top row using a SELECT TOP 1
I was trying to do this with a subquery, but SQL is throwing an error asking me for EXISTS statments.
I have the following as a subquery in a larger stored procedure:
SELECT P.ProductId, P.ProductName, P.Category , (SELECT MAX(O.Orderdate) FROM dbo.[Orders] AS O WHERE O.ProductId=P.ProductId) As MostRecentOrder, ROW_NUMBER() OVER (ORDER BY MostRecentOrder DESC) AS RowNumber FROM dbo.[Products] AS P WHERE P.Category=@category
@category is an input parameter
I am getting an error pointing to the Order By clause stating that "MostRecentOrder" is an invalid column name. If I sort by P.ProductId or P.ProductName, it works fine. Any ideas?
Thanks
Hi All, This Subquery is kicking my ***. Maybe you can help. I want to query a query.I have the user enter a phrase from a textbox, then I want to group the results by element_label. This is what i have so far, but its not working. SELECT Element_ID, Element_Label, Element_Name, Question_ID, Question_Label, Question_Level, Question_Text, RelatedSRR
FROM qryforaspx
WHERE ([Question_Text] LIKE '%' + ? + '%')
IN
SELECT Element_Label FROM Description
Group by
Element_label Thanks,
Has anyone seen where subqueries collapse into a sum??? I have code like the following, which has been running fine for over a year:UPDATE Reports..DataStats SET Vendors_Cnt = (SELECT COUNT(*) FROM vVendors__AllRecords), Vendors_Audit_Cnt = (SELECT COUNT(*) FROM vVendors_InvAudit), Vendors_Rpts_Cnt = (SELECT COUNT(*) FROM vVendors_Inv12mo), Vendors_InvUnused = (SELECT COUNT(*) FROM vVendors_InvUnused),Vendors_InvOne = (SELECT COUNT(*) FROM vVendors_InvOne), Vendors_InvMulti = (SELECT COUNT(*) FROM vVendors_InvMulti), Vendors_InvUnpaid = (SELECT COUNT(*) FROM vVendors_InvUnpaid), Vendors_InvNewer = (SELECT COUNT(*) FROM vVendors_InvNewer), Vendors_Inv12mo = (SELECT COUNT(*) FROM vVendors_Inv12mo), Vendors_InvPrior = (SELECT COUNT(*) FROM vVendors_InvPrior), Vendors_InvSkipYear = (SELECT COUNT(*) FROM vVendors_InvSkipYear), Vendors_Known = (SELECT COUNT(*) FROM vVendors_Known), Vendors_Orphaned = (SELECT COUNT(*) FROM vVendors_Orphaned), Vendors_Active = (SELECT COUNT(*) FROM vVendors_Active), Vendors_Inactive = (SELECT COUNT(*) FROM vVendors_Inactive), Vendors_Excluded = (SELECT COUNT(*) FROM vVendors_Excluded)WHERE (AuditName = @AuditName)But now it is generating overflows....and is not equivalent to (ignoring the obvious UPDATE vs. return differences for illustration):SELECT COUNT(*) FROM vVendors__AllRecordsSELECT COUNT(*) FROM vVendors_InvAuditSELECT COUNT(*) FROM vVendors_Inv12mo SELECT COUNT(*) FROM vVendors_InvUnusedSELECT COUNT(*) FROM vVendors_InvOneSELECT COUNT(*) FROM vVendors_InvMultiSELECT COUNT(*) FROM vVendors_InvUnpaid SELECT COUNT(*) FROM vVendors_InvNewer SELECT COUNT(*) FROM vVendors_Inv12mo SELECT COUNT(*) FROM vVendors_InvPrior SELECT COUNT(*) FROM vVendors_InvSkipYear SELECT COUNT(*) FROM vVendors_KnownSELECT COUNT(*) FROM vVendors_OrphanedSELECT COUNT(*) FROM vVendors_Active SELECT COUNT(*) FROM vVendors_Inactive SELECT COUNT(*) FROM vVendors_ExcludedThis appears to have started around the beginning of May. Anyone else suffer after patches?
View 5 Replies View Relatedi have a table which i`m having difficulty setting up a subquery on.
cmpcode code grpcode
------------ --------- ------------
CORP 96020 01ADMIN
HON 96020 01ADMIN
LON 96020 04FOREIGN
LON 96020 01DIRECT
LON 96020 03ELLIOTT
LON 96020 02ACTIVE
NEW 96020 02INACTIVE
NEW 96020 01ADMIN
NEW 96020 03HOLECEK
SIN 96020 01ADMIN
what i would like to do is pull in only `codes` with a grpcode in (02active, 01direct). in the example above, i would only want the `lon` cmpcode to appear, since it`s both 01direct and 02active. since the grpcodes are on different lines, i`m not sure how to accomplish this. also, my key is cmpcode, code - not just code. here`s how i`ve been attempting to do it:
select
cmpcode,
code,
grpcode
from oas_grplist
where
elmlevel = 5 and
grpcode = `02ACTIVE` and
code in(select code from coda..oas_grplist where grpcode = `01direct`).
the problem with this is the subquery join is only based on joining code, and cmpcode needs to be included in the join.
any ideas?
thanks in advance, André
I have a SELECT statement with a subquery. I use an alias as I add the results of the subquery to the dataset. I then try to use the alias in the WHERE clause of the SELECT statement. I get an “Invalid column name “ message with this code:
select i.id as itemid,
(select top 1 ca2.itemid from itemassign ca2
inner join account a2 on ca2.accountid=a2.id
where a2.customerid=c.id and ca2.itemid=i.id)
as iaid
from item i
inner join customer c on i.customerid=c.id
where i.customerid=1 and iaid is null
order by i.id DESC
Server: Msg 207, Level 16, State 3, Line 1
Invalid column name 'iaid'.
If I run the statement without the and condition in the WHERE clause it returns a valid result.
Any input on this will be very appreciated!
Thank you,
IRead
Sorry about my last post, it seemed to generate nothing but confusion. Hopefully I will explain the problem better this time.
Here are my tables with sample data:
Code:
abmtransmitter table:
Transmitter ID | Site_name | last_test_date | last_failed_test_date
A0001 Site01 2007-06-12 2007-06-10
A0002 Site02 2007-05-23 2007-06-06
A0003 Site03 2007-06-05 2007-06-12
A0004 Site04 2007-01-18 2007-05-18
AbmSignal Table:
Transmitter | Signal_id | Signal_date
A0001 trouble 2007-06-09
A0001 fail test 2007-06-10
A0001 test 2007-06-11
A0001 test 2007-06-12
A0002 test 2007-05-23
A0002 fail test 2007-05-30
A0002 fail test 2007-06-06
A0003 test 2007-06-05
A0003 fail test 2007-06-12
A0004 test 2007-01-18
A0004 fail test 2007-02-18
A0004 fail test 2007-03-18
A0004 fail test 2007-04-18
A0004 fail test 2007-05-18
I am trying to get a list of transmitters that have failed to send their scheduled communication test.
I only want a list of the transmitters who have failed two communications tests since the last successful test.
In the above data, the list would result with A0002 and A0004. A0001 passed it's most recent test, and A0003 has only failed one time since it's last successful test.
The following query does not look correct to me, but it does give me the results that *look* correct.
If it works, why does it work because I don't understand how the query on abmtransmitter is passing the value last_test_date to the subquery.
Or is this just a fluke and my result set looks correct but may not be?
'
Code:
Select Transmitter_id, Site_name from abmtransmitter where transmitter_id in
(select transmitter from abmsignal where signal_id = 'fail test' and signal_date > last_test_date
group by transmitter having count(transmitter) > 1) and last_failed_test_date > last_test_date Order by site_name
I have a subquery where I get 2 rows back which cause issues (since I can't return more then one). I am using this subquery in my function and I can't use a temp table in order to select the correct value. what other options do I have . My subquery returns 2 dates and I need to return from my function the max date.
View 1 Replies View RelatedHi
Im using sql server 2000 and I have sql statement that needs to do a LIKE statement from values from another table. An example would be the below
select Name, PostCode from Customers
where Post LIKE (select PartialPostCode + '%' from areas where area_arid = '123')
However if the above sub query returns more than one row then it will error. So I thought I would create a function to return a string such as the below and put it into vvariable
@strPostCodesLike = 'PostCode LIKE 'WS1 %' OR PostCode LIKE 'WS2 %'
And tried to execute the following SQL statement
select Name, PostCode from Customers WHERE @strPostCodesLike
However the above does not work, as I would need to use dynamic sql to get it to work. I cant use dynamic sql unfortunately.
Any help would be much appreciated
Many thanks in advance
I am new to sql and i was reading about subquery and i think its the right tool for what i want to achieve
i have two tables
Products table, OrdersLine table
Products Table
ProdSku
ProdName
QOH
Cost
********
OrdersLine Table
OrderNum
ProdSku
Qty
I want to get the product Sku, Name, QOH, Cost and the Sum(Qty) from OrdersLine
this is what i have tried
SELECT dbo.Products.ProdSku AS Sku, dbo.OrdersLine.Qty AS Expr1
FROM dbo.Products INNER JOIN
dbo.OrdersLine ON dbo.Products.ProdSku = dbo.OrdersLine.ProdSku
WHERE (dbo.Products.ProdSku = '122345')
GROUP BY dbo.Products.ProdSku
please help!
I am cofuse with subquery.HOW does subquery work. the inner or outer query exicute first. what are different type of sub query. plz give example. i am more confuse with exits subquery
View 3 Replies View RelatedI have this subquery that I'm trying to get info from the two seperate tables to show up, but I only get one or the other.
-- This report is for the DC. This report is to look at what items
-- come in a kit and what the inventory levels looks like at the
-- time the report is run. 07/18/06 mjg
SELECT I.ItemID, D.ShortDesc, KI.ItemID, KD.ShortDesc
FROM timKitCompList KL
INNER JOIN timItem I ON KL.CompItemKey = I.ItemKey
INNER JOIN timitemdescription D ON I.ItemKey = D.ItemKey
WHERE EXISTS
(SELECT KI.ItemID AS KitItemNo, KD.ShortDesc AS KitItemDesc
FROM timKit K
INNER JOIN timItem KI ON K.KitItemKey = KI.ItemKey
INNER JOIN timitemdescription KD ON KI.ItemKey = KD.ItemKey)
Here are the error messages that I get:
Server: Msg 107, Level 16, State 2, Line 4
The column prefix 'KI' does not match with a table name or alias name used in the query.
Server: Msg 107, Level 16, State 1, Line 4
The column prefix 'KD' does not match with a table name or alias name used in the query.
Hi guys!
I need help. I have two tables (customers & orders). I want to build a query that lists all the customers who haven't placed an order in over a year. Below are the simplified tables (i've removed other fields that I don't think are relevant to this query). Do I need to do a subquery or something? Please help!
TABLES:
CUSTOMERS
custid (unique autonumber)
ORDERS
custid (int)
orderdate (date)