Translating Enterprise Manager And SQL Query Analyzer To SQL Server Management Studio

Will Installing Sql Server Management Studio 05 Upgrade Enterprise Manager 00?
I was wondering if i install sql server management studio express on a pc with enterprise manager on it, if that will upgrade the enterprise manager?  I was hoping to have them installed side by side so that i can manage my sql server 2000 dbs with enterprise manager and manage a sql express 05 db i have on another pc with the managment studio.
Thanks!

View Replies !

---

Will Installing Sql Server Management Studio Express Upgrade Enterprise Manager?
I was wondering if i install sql server management studio express (05) on a pc with enterprise manager(00) on it, if that will upgrade the enterprise manager?  I was hoping to have them installed side by side so that i can manage my sql server 2000 dbs on a server with enterprise manager and manage a sql express 05 db i have on another pc with the managment studio.Thanks!

View Replies !

---

Enterprise Manager Vs Management Studio?
Hi,

I am using Sql server 2005 express edition, and I want to import a table to text file using express manager.

How to use the Management studio to Import the table into text file as using in enterprise manager in Sql server 2000?

As many of you may faced this problem, if you can please help me.

regards,
km.

View Replies !

---

What Version: Enterprise Manager Or Management Studio Express
This may be a dumb question but I have searched and haven't found an answer to it here yet.

We are planing to get SQL Server 2005 for a specific purpose.We have several existing stand alone SQL Server 2000 database servers already. I have Enterprise Manager (2000) client installed on my PC. I recently installed SQL Server Express (2005) on my PC to get to know about new features.

I have run into problems (BCP specifically) with having two versions of C:Program FilesMicrosoft SQL Server80... and C:Program FilesMicrosoft SQL Server90... on my PC.

Is there any point before or after we purchase Standard version of SQL Server 2005 when I can do away with C:Program FilesMicrosoft SQL Server80... and/or uninstall Enterprise manager?

In other words can I manage SQL Server 2000 databases using only Management Studio(SQL Server 2005 client)? If not, how do I manage the two different versions of the client software on a single PC.

Thanks,

Dave K.

View Replies !

---

Connection Issue With Enterprise Manager But Works With Management Studio
Hi,I have an interesting scenario. I have a SQL Server 2000 Standard Edition instance running on Computer A. I'm trying to access it through computers B and C.Computer B has Sql Server 2005 Express Edition installed and I was able to use its Management Studio and connect to instance on Computer A.Computer C has SQL Server 2000 Standard Edition installed. When I try to connect to the instance on Computer A, I get connection failed message.I checked some settings. Both TCP/IP and Named pipes are enabled on the instance in A. The TCP/IP port is set to 1433 for both client and server.Please give me some ideas as to how I can solve this problem. -Thanks

View Replies !

---

Enterprise Manager / Query Analyzer Tcp/ip
How can I force Enterprise Manager and Query Analyzer to use TCP/IP?
While my applications connect instantly to the database
after I started using the NTL parameter in connect string, these 2
applications take forever and a number of retries to connect.

Can someone help?

Thanks
Liju

View Replies !

---

Difference Between Enterprise Manager And Query Analyzer
Hi All,What are the pros and cons between using Enterprise Manager or QueryAnalyzer for my queries.Currently I use Enterprise Manager because I prefer the interface andonly use Query Analayzer when queries time out in Enterprise Manager,but I'm sure there must be more to it.Regards,Ciarán

View Replies !

---

Enterprise Manager Job Scheduler Vrs Query Analyzer???
I run a stored procedure manually each day without fail using QueryAnalyzer.I.E. I right click in the browser window on the storedprocedure hit open and execute. I am trying to get my "DBA" toschedule this job in Enterprise manager and they keep getting syntaxerrors that make no sense and keep asking me to fix the code.Is there any difference in how the job scheduler executes a procedurevrs doing it in Query analyzer via Open/Execute that requires adifferent SQL syntax??? Im thinking that this problem is not the codebut a permissions issue What are your thoughts?

View Replies !

---

Cannot Open Query Analyzer From Enterprise Manager
After I installed MSDE, I cannot open QA from Enterprise Manager - error message says: the specified file was not found. Any ideas anybody?


Thank you.
Alexander

View Replies !

---

SQL Enterprise Manager And Query Analyzer Displaying Different Row Counts
The row counts I am getting from SQL Enterprise Manager and QueryAnalyzer are different. When I double click a table in EnterpriseManager it gives me a row count of say 1000. However, when I select *from that same table in Query Analyzer it returns 1028 rows. Anyoneknow why or better yet, how to fix it? Thanks!

View Replies !

---

Viewing Database Via Query Analyzer And/or Enterprise Manager
We are running SQL 2000 SP3 on a Win2K server with multiple user databases. Our current problem is the ability of users to view the database objects via the native tools.

Example: User Bob
Bob has the following rights:
DB A – datareader/datawriter
DB B – datareader/datawriter
DB C – datareader
DB D – datareader
DB E – datareader/datawriter

The user has no builder rights or server roles.

In Enterprise Manager, the user can not see any databases. In Query Analyzer, the user can only see DB A, B, and C. Anyone seen this problem before and/or have suggestions?

Thanks in advance!

View Replies !

---

Can't Find Enterprise Manager And Query Analyzer After Setup
I downloaded the trial version of sql server 2005. but after installation, I couldnt find the Enterprise Manager and Query Analyzer. Any idea about that? Thanks.

View Replies !

---

Difference Of Sqlserver Management Studio With Query Analyzer?
what are the new features provided by SQL management studio

View Replies !

---

Query Analyzer Does Not See Enterprise Manager Database And Vise Versa
I am using SQL Server 2000.I have created a new database in Query Analyzer but I cannot see it inEnterprise Manager.I then created a new database in Enterprise Manager, but I can't see it inQuery Analyzer.How do I get these applications to see the databases that the other creates?Thanks,Greg

View Replies !

---

Enterprise Manager, Query Analyzer, Client Tools Question
Our installation has two instances of SQL Server 7. We have the client tools associated
with SQL Server 7 on our NT desktop. We will be implementing two servers running
SQL Server 2000 (SMS).

Ideally, on our NT desktop we would like to have one set of client tools (EM, Query Analyzer,
etc.) for supporting both versions of SQL Server.

Do we need both versions of client tools on our desktop?

Will SQL Server 2000 client tools support both versions of SQL Server?

Thanks in advance for your help!!!

View Replies !

---

Data Columns Empty In Management Studio But Not Query Analyzer
we have a database hosted online on sql server 05. at work, we have a sql 2000 query analyzer on a machine, and sql 2005 management studio on a machine. both machines can connect to the database, both can pull up the data from a certain table. but there are two columns that display info in query analyzer that show up as empty on management studio. not null, just empty.
any ideas why?

View Replies !

---

Default Date Format Difference In Enterprise Manager Vs. Query Analyzer
Not sure why SQL Server displays different date formats for the same date in Enterprise Manager query window vs. SQL Query Analyzer.
 

When I see table rows through enterprise manager the date field looks like 3/18/2008 12:30:00 PM

Whereas when I run a query a query in Query Analyser/or through any other application the date is shown in a different format: 2008-03-18 12:30:00.000
 

Is there a setting in SQL Server that can remove the date format inconsistency?

View Replies !

---

Sql Server 2005 Express/management && Enterprise Manager
I have presently installed on my local computer Enterprise Manager for access to our remote sql server. May I install sql server 2005 express and sql server  management studio express on my local computer without causing conflicts with Enterprise Manager?

 

thanks,

damiata

View Replies !

---

SQL Server 2000 Databases To SQL Server 2005? Enterprise Manager And Management Stuio At The Same Server?
When I proposed start to use SQL Server 2005 for new VS 2005 web sites, one of my co-workers responded that
we will update the old SQL Server 2000 databases to SQL Server 2005 when we are ready to use 2005 SQL Server.

Questions:
1. Any expected problems to upgrade old 2000 databases to new 2005 SQL Server?
2. I have installed both 2005/Management Studio Express and 2000/Enterprise Manager in my PC.  Any expected
    problems when running both 2000 and 2005 SQL Server at the same database server?
3.  What is the best configuration for running SQL Server 2005 when we have old 2000 databases?  Upgade or not upgrade?  

TIA,
Jeffrey

View Replies !

---

Cannot Connect To Server Through Visual Studio .NET And Query Analyzer
Good day. I was able to connect to a database server using SQL ServerEnterprise Manager. The Server name specified on the tree isJOMARGON(Windows NT). But no server was detected using either VisualStudio .NET and SQL Server's query analyzer.I highlighted one database (master) on the SQL Server EnterpriseManager and chose 'SQL Query Analyzer' under the 'Tools' menu. Itworked. The Title of the Query Analyzer window isSQL Server Analyzer - [Query- JOMARGON.master.JOMARGONJM Gonzalezand below on the status bar, I can seeJOMARGON(8.0) and JOMARGONJM Gonzalez(52)But again, I cannot connect manually using Query Analyzer as nothing islisted in the SQL Server drop-down listThanks

View Replies !

---

Management Console In Enterprise Manager Error
hi, I always get DR Watson fir Window NT when I test Operators under the Management console. I have created a new operators and when I go to the property to test the email and the pager notification, I get Dr Watson and Sql Server Enterprise disappear.

I am not sure what is going on and if there is someone knows what is going on,please let me know
thanks for your help

Ahmed

View Replies !

---

SQL Management Studio On Vista Enterprise GUI Question
Hi,
I'm using Vista Enterprise edition and my SQL Management Studio (2005) works very well but the object explorer shows still + and - signs in the treeview. When I open SQL Server Enterprise Manager (2000) then I see the little triangles I'm used to view in the Windows Explorer from Vista itself.
Is there any way to enable the Vista look and feel in the Object explorer of SQL Management Studio as well? This is merely a GUI question but it would be nice to have it .
Grz, Kris.

View Replies !

---

SQL 2000 Enterprise Manager 'Management' Folder Empty
Hi,
We patched our servers last week and now, when connecting to our server remotely via Enterprise Manager (with DBO permissions), the management folder shows as empty.  My guess is its permission related but, I'm not sure where to begin to correct the issue since we aren’t sure how it happened.  Any help will be greatly appreciated.
~des

View Replies !

---

Backup Command And Getting Progress Like Enterprise/Management Studio
Sorry if this is the wrong place for this, but I couldn't find a better place...

I have a .net application that calls a TSQL command to backup the database when the user clicks a button. I would like to give the user incremental feedback on what's going on.

So I hooked into the connection's InfoMessage event.

It gets called at the end of the command, not during.  I read somewhere that you're supposed to be able to add "WITH NOWAIT" to a TSQL command to have it return immediately and then use the InfoMessage for updates, but the Backup command doesn't support it.

I also set a trace on the SQL Server and told SQL Server to backup using Enterprise manager hoping to catch what it was doing special to get these commands, and didn't see anything unique.

Does anyone have suggestions? I really need to show the progress of what's going on.

Thanks!

View Replies !

---

Query Autocomplete In SQL Server Management Studio?
Brand new to this tool, and I am constructing a few queries. I am used tohaving a column list pop up when referencing table names in queries - thelat couple of products I used provided this feature.Is this available in the SQL Server Management studio tool - if so how?TnxGary

View Replies !

---

Query Abt Microsoft SQL Server Management Studio
 

Hi all,
I am Vaibhav.I am using Microsoft SQL Server Management Studio 9.00.1399.00 on my machine , which have Windows 2000 Professional OS installed. Now I am upgrading My ystem to Windows Vista OS.
And I am not getting whether Microsoft SQL Server Management Studio 9.00.1399.00 will support Windows Vista?  or    I have to go for Higher version available for Microsoft SQL Server Management studio ?                                
Please asist me on same.
 
Thanks,
 
Vaibhav Tare
 

View Replies !

---

SQL Server Management Studio - New Query Window
I'm trying to write a query with named parameters/variables in the Management Studio - New Query pane. Where should I post a question about how to create parameters/variables?
 
Thanks,
Gregory

View Replies !

---

SQL Server Management Studio - Query Results Problem
 

Hi there
 
I have a problem with SQL Server Management Studio after insdtall regarding querys result showing!
 
Problem:
I have a query i run and getting results in a grid view. But the ruslt is somehow corrupted. I guess you´d think its a sql problem but it is not. Because when i take the same query and run it in the old Query Analyzer the result is correct. For better explanation written the results below to show my problem.
 
 
In old Query Analyzer (correct)
 

 
1,00      60,00
1,00      34,80
1,00      79,20
-1,00    -79,20

 

In SQL Server Management Studio (corrupt)
 

 
1.000        60.00000000
1.000        34.80000000
-1.000       79.20000000
1.000       -79.20000000
 
What can cause this problem? Do I have to change some settings to make SQL Server Management Studio show the result correctly?
 
Best Regards
Michael 

View Replies !

---

SQL Query That Works In SQL Server Management Studio, But Doesn't On .NET 2.0 Page
SELECT favorites.FID, favorites.filename, favorites.username, files.status, files.private, files.views, files.title FROM favorites INNER JOIN files ON favorites.filename = files.filename WHERE (favorites.username = @username) AND (files.status IS NULL) AND (files.private = @private)@private is manually set to 'no'@username is set to profile.usernamewhen I run the above query in microsoft sql server mgmt studio express on the database, it presents all the information i'm asking for very easily. however when i try to implement this query on a aspx .net2.0 page with teh sqldatasource and a gridview, no data is displayed.anyone know what my problem is? 

View Replies !

---

Enterprise Mgr Vs. Query Analyzer (Discrepancy)
I have a table that contains negative values in one of its columns. When using Enterprise Mgr, if I right-click on the table and choose "Open Table-->Return All Rows", the negative values appear as such.

However, if I copy the SQL that was used to return all rows and paste it into Query Analyzer, the query analyzer results do not show the negative sign in front of the column values (i.e., they appear as positive values). In addition, if I use ODBC to connect to the tables from within MS Access 2000, the negative sign does not show up either.

What gives? What ODBC factors might be in play here? I'm using Jet 4 Name and the following SQL Server ODBC driver:
File = sqlsrv32.dll
Date = 10/22/1999 9:50:38 AM
Version = 3.70.8.20

Any help is greatly appreciated.
Jeff Jones
Atlanta, GA

View Replies !

---

Cannot Run Query From Analyzer In Enterprise Manag
I am try to do a query of dates.
I have an access adp front end with sql2000 backend
I am trying to query vacation dates.
the start date month and day is based on month(hiredate) & day(hiredate)
i need to find the number of days taken during a specific period
i have to use entering start date and end date and days.

i am trying a query that returns sum of days before the end date changes.

it works in sql analyzer but doesn't when i paste it in EM
doesn't want to save it. it says error by if..



heres the code.



SE EMPLOYEE

IF { fn CURDATE() } > (SELECT distinct cast(Year(dbo.[Employment Information].[Hire Date]) as varchar(30)) + '-' + CAST(DATEPART([month], dbo.[Employment Information].[Hire Date]) AS VARCHAR(30)) + '-' + CAST(DATEPART([day], dbo.[Employment Information].[Hire Date]) AS VARCHAR(30))
FROM dbo.[Employment Information] INNER JOIN
dbo.[Employee Vacation] ON dbo.[Employment Information].[Employee ID] = dbo.[Employee Vacation].[Employee ID])

BEGIN

SELECT dbo.[Employee Vacation].[Employee ID], SUM(dbo.[Employee Vacation].[Number of Days]) AS [Days Taken]
FROM dbo.[Employee Vacation] INNER JOIN
dbo.[Employment Information] ON dbo.[Employee Vacation].[Employee ID] = dbo.[Employment Information].[Employee ID]
WHERE (dbo.[Employee Vacation].[Start Date] BETWEEN CAST(DATEPART([month], dbo.[Employment Information].[Hire Date]) AS VARCHAR(30))
+ '-' + CAST(DATEPART([day], dbo.[Employment Information].[Hire Date]) AS VARCHAR(30)) + '-' + CAST(YEAR({ fn CURDATE() }) AS VARCHAR(30)) AND
CAST(DATEPART([month], dbo.[Employment Information].[Hire Date]) AS VARCHAR(30)) + '-' + CAST(DATEPART([day],
dbo.[Employment Information].[Hire Date]) AS VARCHAR(30)) + '-' + CAST(YEAR({ fn CURDATE() })+ 1 AS VARCHAR(30)))
GROUP BY dbo.[Employee Vacation].[Employee ID]
END

ELSE
BEGIN

SELECT dbo.[Employee Vacation].[Employee ID], SUM(dbo.[Employee Vacation].[Number of Days]) AS [Days Taken]
FROM dbo.[Employee Vacation] INNER JOIN
dbo.[Employment Information] ON dbo.[Employee Vacation].[Employee ID] = dbo.[Employment Information].[Employee ID]
WHERE (dbo.[Employee Vacation].[Start Date] BETWEEN CAST(DATEPART([month], dbo.[Employment Information].[Hire Date]) AS VARCHAR(30))
+ '-' + CAST(DATEPART([day], dbo.[Employment Information].[Hire Date]) AS VARCHAR(30)) + '-' + CAST(YEAR({ fn CURDATE() }) - 1 AS VARCHAR(30)) AND
CAST(DATEPART([month], dbo.[Employment Information].[Hire Date]) AS VARCHAR(30)) + '-' + CAST(DATEPART([day],
dbo.[Employment Information].[Hire Date])- 1 AS VARCHAR(30)) + '-' + CAST(YEAR({ fn CURDATE() }) AS VARCHAR(30)))
GROUP BY dbo.[Employee Vacation].[Employee ID]
END

View Replies !

---

SQL2000 Databases Not Showing Up In Enterprises Manager But Do Show Up In Management Studio
I can see the databases in the Query Analyzer Object Browser and with EXEC sp_helpdb.
 
NT 5.2 (3790) Microsoft Windows Server 2003, Enterprise Edition for 64-Bit Itanium-based Systems
8.00.2039 Enterprise Edition (64-bit)
 
I did a dbcc checkdb('master') and dbcc checkdb('msdb') and found no errors.
 
I can't see anything in the Management folder either.
 
When I try to view a login it gives me and Error 220.  It works fine in Management Studio.
 

Any ideas?
 
I found a fix at: http://www.ureader.com/message/92216.aspx
 
I had two databases that were offline that had the Error 220.  We took these off line a few weeks back.  I'm not sure why this happened but it works now.
 
I'll include the code in case the link goes away.
 
USE master
GO
DECLARE @db_name varchar(500)
DECLARE dbn_cursor CURSOR FOR
SELECT [name] FROM sysdatabases;
OPEN dbn_cursor
FETCH NEXT FROM dbn_cursor
INTO @db_name
WHILE @@FETCH_STATUS = 0
BEGIN
select * from sysdatabases where name = @db_name
IF @@ERROR <> 0
 BEGIN
     declare @off int
     print 'Restarting database '+@db_name
    
     exec @off = sp_dboption @db_name, 'offline', 'TRUE'
     IF @off <> 0 
  print 'Taking offline failed! Need manual workaround!'
     else
  begin
      declare @on int
      exec @on = sp_dboption @db_name, 'offline', 'FALSE'     
      IF @on <> 0
   print 'Bringing online failed! Need manual workaround!'  
      else
   print 'Restart successfull!'
         end  
 END
FETCH NEXT FROM dbn_cursor
INTO @db_name
END
CLOSE dbn_cursor
DEALLOCATE dbn_cursor
GO

View Replies !

---

Trouble Translating Query From Access To SQL Server
Gary writes "I'm imported the query from Access (where it worked perfectly) to SQL View where the "Iif" statements caused an issue.

Here's a SMALL portion of the original:
SELECT tblTransactionBuyer.TransBuyerID,
tblDefaults.CompID,
([TransBuyerPropSalePrice]*([DefBasePercentVA])/100) AS LoanBaseVA,
[TransBuyerPropSalePrice]*
(IIf([TransBuyerPropSalePrice]>=[DefLoanMinJumbo],[DefFundingJumboVA],
IIf([TransBuyerVaUsed]="Yes",[DefFundingUsedVA],[DefFundingVA])))/100 AS VAFunding, ......


Below, are my changes so far, but I'm stuck.
SELECT tblTransactionBuyer.TransBuyerID,
tblDefaults.CompID,
([TransBuyerPropSalePrice]*([DefBasePercentVA])/100) AS LoanBaseVA,

[TransBuyerPropSalePrice]*
If([TransBuyerPropSalePrice]>=[DefLoanMinJumbo],[DefFundingJumboVA],
If([TransBuyerVaUsed]="Yes",[DefFundingUsedVA],[DefFundingVA]/100)) AS VAFunding, ........

It appears that I may not be able to put an IF into a SQL SELECT. If not, how can I get the same effect ?

Thanks. Gary

Listed Below is the Full Access Query:

SELECT tblTransactionBuyer.TransBuyerID, tblDefaults.CompID, tblTransactionBuyer.TransBuyerEntryDate, qryUserAlphaList.UserName, qryUserAlphaList.UserAreaCode, qryUserAlphaList.UserPhone, tblTransactionBuyer.TransBuyerName, tblTransactionBuyer.TransBuyerVaEligible, tblTransactionBuyer.TransBuyerPropAddress, tblTransactionBuyer.TransBuyerPropCity, tblTransactionBuyer.TransBuyerPropSalePrice, ([TransBuyerPropSalePrice]*([DefBasePercentFHA])/100) AS LoanBaseFHA, ([TransBuyerPropSalePrice]*([DefBasePercentCONV])/100) AS LoanBaseCONV, ([TransBuyerPropSalePrice]*([DefBasePercentVA])/100) AS LoanBaseVA, ([TransBuyerPropSalePrice]*([DefBasePercentJumbo])/100) AS LoanBaseJumbo, [LoanBaseFHA]*[DefMipFHA]/100 AS MipFHA, [LoanBaseCONV]*[DefMipCONV]/100 AS MipCONV, [LoanBaseJumbo]*[DefMipJumbo]/100 AS MipJumbo, [TransBuyerPropSalePrice]*(IIf([TransBuyerPropSalePrice]>=[DefLoanMinJumbo],[DefFundingJumboVA],IIf([TransBuyerVaUsed]="Yes",[DefFundingUsedVA],[DefFundingVA])))/100 AS VAFunding, [LoanBaseFHA]-[DownOverMinFHA]+[MipFHA] AS LoanTotalFHA, [LoanBaseCONV]-[DownOverMinCONV]+[MipCONV] AS LoanTotalCONV, [LoanBaseJumbo]+[MipJumbo]-[DownPaymentJumbo] AS LoanTotalJumbo, [LoanBaseVA]+[VAFunding]-[DownPaymentVA] AS LoanTotalVA, [TransBuyerPropSalePrice]*([DefMinDownPayFHA]/100) AS MinDownFHA, [TransBuyerPropSalePrice]*[DefMinDownPayCONV]/100 AS MinDownCONV, [TransBuyerPropSalePrice]*[DefMinDownPayVA]/100 AS MinDownVA, [TransBuyerPropSalePrice]*[DefMinDownPayJumbo]/100 AS MinDownJumbo, tblTransactionBuyer.TransBuyerIntRate, tblTransactionBuyer.TransBuyerLoanYears, tblTransactionBuyer.TransBuyerHazardIns, tblTransactionBuyer.TransBuyerFloodIns, tblTransactionBuyer.TransBuyerClosingDate, IIf(([TransBuyerConvDownPayPercent]/100)*[TransBuyerPropSalePrice]>[TransBuyerConvDownPayCash],([TransBuyerConvDownPayPercent]/100)*[TransBuyerPropSalePrice],[TransBuyerConvDownPayCash]) AS ConvDownPay, tblDefaults.DefBuyAppraisal, tblDefaults.DefBuyCreditReport, tblDefaults.DefBuyJumboUnderwriting, tblDefaults.DefBuyVAUnderwriting, tblDefaults.DefBuyFHAUnderwriting, tblDefaults.DefBuyCONVUnderwriting, tblDefaults.DefBuyJumboTaxService, tblDefaults.DefBuyVATaxService, tblDefaults.DefBuyFHATaxService, tblDefaults.DefBuyCONVTaxService, tblDefaults.DefBuyFloodCert, tblDefaults.DefBuyAbstractTitle, tblDefaults.DefBuyMiscFedex, tblDefaults.DefBuyRecording, tblDefaults.DefBuySurvey, tblDefaults.DefBuyAttorney, tblDefaults.DefBasePercentFHA, tblDefaults.DefBasePercentCONV, tblDefaults.DefBasePercentJumbo, tblDefaults.DefBasePercentVA, [TransBuyerPropSalePrice]*[DefPropTaxRate] AS PropTax, [LoanBaseFHA]*[DefBuyOrigFHA]/100 AS OrigFHA, [LoanBaseCONV]*[DefBuyOrigCONV]/100 AS OrigCONV, [LoanBaseVA]*[DefBuyOrigVA]/100 AS OrigVA, [LoanBaseJumbo]*[DefBuyOrigJumbo]/100 AS OrigJumbo, [DefTitleInsDollar]*([TransBuyerPropSalePrice]/[DefTitleInsPerX]) AS TitleInsurance, [OrigFHA]+[DefBuyAppraisal

View Replies !

---

Sql Query Analyzer Against Cisco Call Manager DB
Greetings all. New user here. I'm just getting started with using sql query's with our cisco voIP call manager database. Although cisco has a utility "CDR" which runs pre-defined reports; it's not enough. So far there have been several request for specific data which "CDR" cannot compile, in which we have to use analyzer. Unfortunately I'm not versed and need a little help. It's been asked I pull a report from call manager which shows all "forced authorization Codes" cisco calls these client matter codes. Here is the query I tried using. It pulls all user data but the client matter code column is empty. I tried with * and *.* inside brackets as well.

select * from CallDetailRecord where clientmattercode=''

Can anybody help so I can get the records of who has what particular in use client matter code?

thanks to all in advance, I hope to learn as much as possible from the experts.

View Replies !

---

Visual Studio Database File And SQL Server Management Studio Express Question
I have a database in my "App_Data" folder of my visual studio project.  I can view it fine in Visual Studio's built-in tools for managing a database attached to a solution.  However i recently started playing around with the SQL Server Management Studio Express program.  When i attach my database to Management Studio, and try to run my program it crashes.  I think it might be a permissions error?!? When i detatch it and reattach it in visual studio it runs fine again.   Any suggestions? ThanksJason 

View Replies !

---

SQL Server Management Express Studio Management Tools
 

I have recently installed the SQL Server Management Studio Express but I do not find Management Tools in order to create scheduled backups and shrinking of the databases. I was under the impression that this should be included in the Management Studio. I use the SQL 2005 Express for smaller customers who run the SQL on a desktop unit. I need a way to backup the data to a server machine for backup purposes. I have uninstalled and reinstalled to no avail.

View Replies !

---

Help! Enterprise Manager Turns SQL Server Service Manager Off
IF someone can assist me.  Everytime I load up enterprise manager the service manager turns off.  And the enterprise manager can't connect to the local database.  But everytime i turn it back on and try to connect again it shuts it off and around and around we go.  Help would be appreciated.  Thanks.

View Replies !

---

Query Designer Encountered A Query Error Via Enterprise Manager
I am trying to run queries against any of the user tables in my MS SQL 7.0 database. I get a message the Query Designer encountered a query error.
We have tried rebooting the SQL Server and I am still getting these messages. Also, the SQL error logs look fine - all database
maintenance are running successfully including the DBCCs which show no errors. Any help would be greatly appreciated as we are to go
into production in a few days.

View Replies !

---

Visual Studio 2005 Standard And SQL Server Management Studio?
I am new to visual studio and I am still not sure of all its components and features.

I installed visual studio 2005 standard edition but cannot find SQL Server Management Studio?

I guess this must be because it is not included with Visual studio 2005 standard. Is it included with VS 2005 professional?

I want to add pictures of products to my shopping site using an SQL database and I’ve been told that SQL Server Management studio is required as it is a graphical tool.

How would I go about obtaining the SQL server management studio. There seems to be different versions of SQL server that it is confusing to know which one to purchase.

Will the SQL server 2005 version that comes with Visual studio standard be sufficient for me now right? I want to create a shopping site with hundreds, perhaps even thousands of products. I want to use an SQL server 2005 database. The database will include ‘dynamically generated’ product images if that is the correct terminology.

My goodness, it seems I still have so much to learn.

Thanks

View Replies !

---

How Do I Get The Database That I Am Using In Visual Studio Into My SQL Server Management Studio?
How do i get the database that i am using in visual studio into my SQL server management studio?
i need to create some scripts to create stored procedures on a live server.

View Replies !

---

Fix: T-SQL Debugger In Query Analyzer And Visual Studio Breaks When Windows XP Service Pack 2 Is Applied
How to fix:Apply SQL Server Service Pack 3A to Server and clients.Apply Workaround in: http://support.microsoft.com/kb/839279Apply Hotfix in: http://support.microsoft.com/kb/839280 to SQL Serverand Windows XP SP2 clients .(note: requires call to Microsoft support to get hotfix which should bea free support incident)Good luck,Macwww.datanetzs.com

View Replies !

---

Query Designer-Enterprise Manager
Iam trying to see the rows using e/m i.e by right clicking tables and choosing return all rows option but it gives me an error but if i chose the other options(i.e. design table etc) it works well.only that return rows option in all the databases doesn't work.

Again iam able to retrieve rows from query analyzer.

The error which it gives is:

An unexpected error happened during the operation.

[Query]-Query Designer encountered a Query error:Unspecified error.

Please if anyone knows the solution mail it to l_muthu@hotmail.com

Thanks.

View Replies !

---

Error When Deleting Report In Report Manager And SQL Management Studio
I am getting a rsInternalError when I try to delete a report in Report Manager and SQL Management Studio.  I am able to deploy, move (as long as the report doesn't exist at the destination) and upload but not delete.
 
This is the error dump:
 
<Header>
  <Product>Microsoft SQL Server Reporting Services Version 9.00.3050.00</Product>
  <Locale>en-US</Locale>
  <TimeZone>Central Daylight Time</TimeZone>
  <Path>C:Program FilesMicrosoft SQL ServerMSSQL.10Reporting ServicesLogFilesReportServer__09_19_2007_00_02_45.log</Path>
  <SystemName>HLTHS2</SystemName>
  <OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
  <OSVersion>5.2.3790.65536</OSVersion>
</Header>
w3wp!library!5!9/19/2007-00:02:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!5!9/19/2007-00:12:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!6!9/19/2007-00:22:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!7!9/19/2007-00:32:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!6!9/19/2007-00:42:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-00:52:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!7!9/19/2007-01:02:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!5!9/19/2007-01:12:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!7!9/19/2007-01:22:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!6!9/19/2007-01:32:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!7!9/19/2007-01:42:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!7!9/19/2007-01:52:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!5!9/19/2007-02:02:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-02:12:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!6!9/19/2007-02:22:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!7!9/19/2007-02:32:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-02:42:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-02:52:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!6!9/19/2007-03:02:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!6!9/19/2007-03:12:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!7!9/19/2007-03:22:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-03:32:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!6!9/19/2007-03:42:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-03:52:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-04:02:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!5!9/19/2007-04:12:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!6!9/19/2007-04:22:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-04:32:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-04:42:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-04:52:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!7!9/19/2007-05:02:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!6!9/19/2007-05:12:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!6!9/19/2007-05:22:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!5!9/19/2007-05:32:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-05:42:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-05:52:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-06:02:48:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!6!9/19/2007-06:12:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-06:22:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-06:32:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-06:42:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-06:52:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!5!9/19/2007-07:02:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!5!9/19/2007-07:12:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!7!9/19/2007-07:22:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-07:32:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!5!9/19/2007-07:42:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-07:52:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-08:02:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-08:12:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!7!9/19/2007-08:22:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!7!9/19/2007-08:32:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!7!9/19/2007-08:42:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!1!9/19/2007-08:52:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!5!9/19/2007-09:02:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!5!09/19/2007-09:07:20:: Call to GetItemTypeAction(/Test).
w3wp!library!1!09/19/2007-09:07:21:: Call to CreateFolderAction(Test, /).
w3wp!library!7!09/19/2007-09:07:21:: Call to GetItemTypeAction(/Data Sources).
w3wp!library!7!09/19/2007-09:07:21:: Call to GetItemTypeAction(/Data Sources/Warehouse).
w3wp!library!5!09/19/2007-09:07:22:: Call to GetItemTypeAction(/Test/Invoice Balance).
w3wp!library!6!09/19/2007-09:07:25:: Call to CreateReportAction(Invoice Balance, /Test, True).
w3wp!library!7!09/19/2007-09:07:29:: Call to SetItemDataSourcesAction(/Test/Invoice Balance).
w3wp!library!7!09/19/2007-09:08:25:: Call to GetPermissionsAction(/).
w3wp!library!7!09/19/2007-09:08:25:: Call to GetPropertiesAction(/, PathBased).
w3wp!library!7!09/19/2007-09:08:25:: Call to GetSystemPermissionsAction().
w3wp!library!5!09/19/2007-09:08:25:: Call to ListChildrenAction(/, False).
w3wp!library!5!09/19/2007-09:08:25:: Call to GetSystemPropertiesAction().
w3wp!library!5!09/19/2007-09:08:25:: Call to GetSystemPropertiesAction().
w3wp!library!5!09/19/2007-09:08:29:: Call to GetPermissionsAction(/Test).
w3wp!library!1!09/19/2007-09:08:29:: Call to GetPropertiesAction(/Test, PathBased).
w3wp!library!6!09/19/2007-09:08:29:: Call to GetSystemPermissionsAction().
w3wp!library!6!09/19/2007-09:08:29:: Call to ListChildrenAction(/Test, False).
w3wp!library!6!09/19/2007-09:08:29:: Call to GetSystemPropertiesAction().
w3wp!library!6!09/19/2007-09:08:29:: Call to GetSystemPropertiesAction().
w3wp!library!6!9/19/2007-09:12:45:: i INFO: Cleaned -1 batch records, -1 policies, 0 sessions, -1 cache entries, 0 snapshots, 0 chunks, -1 running jobs, -1 persisted streams
w3wp!library!6!09/19/2007-09:15:04:: Call to GetPermissionsAction(/Test/Invoice Balance).
w3wp!library!6!09/19/2007-09:15:04:: Call to GetSystemPropertiesAction().
w3wp!library!1!09/19/2007-09:15:04:: Call to GetPropertiesAction(/Test/Invoice Balance, PathBased).
w3wp!library!6!09/19/2007-09:15:04:: Call to GetSystemPermissionsAction().
w3wp!library!6!09/19/2007-09:15:05:: Call to GetPropertiesAction(/Test/Invoice Balance, PathBased).
w3wp!library!1!09/19/2007-09:15:05:: Call to ListEventsAction().
w3wp!library!1!09/19/2007-09:15:08:: Call to GetSystemPropertiesAction().
w3wp!library!1!09/19/2007-09:15:13:: Call to GetPermissionsAction(/Test/Invoice Balance).
w3wp!library!5!09/19/2007-09:15:14:: Call to GetSystemPropertiesAction().
w3wp!library!6!09/19/2007-09:15:14:: Call to GetPropertiesAction(/Test/Invoice Balance, PathBased).
w3wp!library!6!09/19/2007-09:15:14:: Call to GetReportParametersAction(/Test/Invoice Balance).
w3wp!library!6!09/19/2007-09:15:14:: Call to GetSystemPermissionsAction().
w3wp!library!6!09/19/2007-09:15:14:: Call to GetPropertiesAction(/Test/Invoice Balance, PathBased).
w3wp!library!6!09/19/2007-09:15:14:: Call to ListChildrenAction(/, False).
w3wp!library!6!09/19/2007-09:15:14:: Call to ListChildrenAction(/Test, False).
w3wp!library!6!09/19/2007-09:15:14:: Call to ListChildrenAction(/, False).
w3wp!library!6!09/19/2007-09:15:14:: Call to ListChildrenAction(/Test, False).
w3wp!library!5!09/19/2007-09:15:14:: Call to GetItemDataSourcesAction(/Test/Invoice Balance).
w3wp!library!6!09/19/2007-09:15:15:: Call to GetSystemPropertiesAction().
w3wp!library!1!09/19/2007-09:15:18:: Call to GetPermissionsAction(/Test/Invoice Balance).
w3wp!library!1!09/19/2007-09:15:18:: Call to GetSystemPropertiesAction().
w3wp!library!5!09/19/2007-09:15:18:: Call to GetPropertiesAction(/Test/Invoice Balance, PathBased).
w3wp!library!7!09/19/2007-09:15:18:: Call to GetReportParametersAction(/Test/Invoice Balance).
w3wp!library!5!09/19/2007-09:15:18:: Call to GetSystemPermissionsAction().
w3wp!library!5!09/19/2007-09:15:18:: Call to GetPropertiesAction(/Test/Invoice Balance, PathBased).
w3wp!library!5!09/19/2007-09:15:18:: Call to DeleteItemAction(/Test/Invoice Balance).
w3wp!library!5!09/19/2007-09:15:19:: a ASSERT: Assertion failed!   Call stack:
 Microsoft.ReportingServices.Library.DeleteItemAction.PerformActionNow() 
 Microsoft.ReportingServices.Library.RSSoapAction`1.Execute() 
 Microsoft.ReportingServices.WebServer.ReportingService2005Impl.DeleteItem(String Item) 
 Microsoft.ReportingServices.WebServer.ReportingService2005.DeleteItem(String Item) 
 System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) 
 System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) 
 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) 
 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) 
 System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values) 
 System.Web.Services.Protocols.WebServiceHandler.Invoke() 
 System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest() 
 System.Web.Services.Protocols.SyncSessionlessHandler.ProcessRequest(HttpContext context) 
 System.Web.HttpApplication+CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() 
 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 
 System.Web.HttpApplication+ApplicationStepManager.ResumeSteps(Exception error) 
 System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) 
 System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) 
 System.Web.HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr) 
 System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType) 
w3wp!library!5!09/19/2007-09:15:19:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., un-named assertion fired for component library;
 Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details.

 
 
The error in the event log is:
 
EventType sql90exception, P1 w3wp.exe, P2 6.0.3790.1830, P3 42435be1, P4 reportingservicesnativeclient.ni.dll, P5 2005.90.3042.0, P6 45cd6edb, P7 0, P8 00005253, P9 00000000, P10 NIL.

 
Thanks in advance!
 
Lori

View Replies !

---

Stored Procedure Executing Durations Are Different Between Executing From Application(web) And SQl Server Management Studio - Query Window
Hi,I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query windowPlease see the image attached http://kyxao.net/127/ExecutionProblem.png Any ideas for this issue?Thanks a lot Jalijack 

View Replies !

---

Query Formatting In SQL Management Studio
I recently upgraded my SQL Server to 2005 and instead of the Enterprise Manager I am now using SQL Server Management Studio.

Does anyone know how to turn off query formatting in views?

In enterprise manager I use to be able to double-click the view and it would open an sql editor which left the code exactly how I formatted it (space, returns etc for ease of reading). Now in Management Studio, each time I modify a view it reformats it so it become confusing to build them.

View Replies !

---

MDX Query With Parameters In Management Studio
 

Hello,
 
I would like to know if it is possible to make a MDX query on a cube with parameters in Management Studio and if yes, how to define the parameters?
 
In fact, I have a quite big query which of course does not work and in Reporting Services, I get an error message which is not very clear :
 
Cannot set the command text for data set "Cube"
Error during processing of the CommandText expression of dataset "Cube"
 
So I would like to test my query in SSMS and correct directly.
 
Edit :
 
Forget the query but my question concerning the parameters definition in SSMS is still asked.
 
Thanks

View Replies !

---

Help Won't Open Up For Enterprise Manager Or Query Analyser
Hey all,Hope this isn't off topic. I've had to reinstall Enterprise Manager andQuery Analyser on my computer. Since the reinstall I haven't been able toopen up the help (F1) files. I have no idea what to check or how to get thehelp files working again. Any help would be appreciated.Thanks,Chris Michael

View Replies !

---

Setting Query Time-out Not Using Enterprise Manager
Hi,

I've set the Query time-out parameter for my default MSDE instance to 1 sec (through the Enterprise Manager) and since the restart of the server I can't connect it through any client tool.
Does anybody know how to return the default value of Query time-out (600s) without using enterprise manager?

thanx a lot

View Replies !

---