Undo Updated Rows In Sql Server 2005

DataSet Rows Being Deleted, But After The Update , The Sql Database Is Not Updated. The Delete Rows Still In The Database.
 Stepping thru the code with the debugger shows the dataset rows being deleted.
 
After executing the code, and getting to the page presentation. Then I stop the debug and start the
page creation process again ( Page_Load ).    The database still has the original deleted dataset rows.
Adding rows works, then updating works fine, but deleting rows, does not seem to work.
 
The dataset is configured to send the DataSet updates to the database. Use the standard wizard to create the dataSet.
 
 
cDependChildTA.Fill(cDependChildDs._ClientDependentChild, UserId);        rowCountDb = cDependChildDs._ClientDependentChild.Count;               for (row = 0; row < rowCountDb; row++)        {           dr_dependentChild = cDependChildDs._ClientDependentChild.Rows[0];           dr_dependentChild.Delete();                      //cDependChildDs._ClientDependentChild.Rows.RemoveAt(0);           //cDependChildDs._ClientDependentChild.Rows.Remove(0);            /* update the Client Process Table Adapter*/          // cDependChildTA.Update(cDependChildDs._ClientDependentChild);      //     cDependChildTA.Update(cDependChildDs._ClientDependentChild);        }
        /* zero rows in the DataSet at this point */        /* update the Child  Table Adapter */       cDependChildTA.Update(cDependChildDs._ClientDependentChild);

View Replies !   View Related

---

#of Rows Updated
Is there a command that will tell me the number of rows that are updated in a statement. I would like to put this in an Stored Procedure and pass the #rows updated back out.

View Replies !   View Related

---

Date Rows Last Updated
How can I produce a list of date/times that each table in my database was last updated?

View Replies !   View Related

---

Returning The Primary Key Of The Last Rows Updated
I would like to return the the Primary Key of the row altered from this query - what changes do I need to make?

UPDATE Members SET LastLog = @time WHERE UserName=@user AND Password=@pass;


Thanks in advance,

View Replies !   View Related

---

Is There A Trigger That Monitors Updated Rows
is there a Trigger that monitors updated rows? I would like to run a

insert into sometable (pkcolumnname)
select pkcolumnname from monitoredtable where ????


"i dont know what goes here to only get value of rows that have been updated"

View Replies !   View Related

---

Finding Out Which Rows Have Been Updated In A Table
Can this be done easilly through a stored proc?

View Replies !   View Related

---

Log Of Rows Inserted/updated/deleted
HI, I am wondering if it is possible to retreive this information without using row count transform. Can I get the # of rows inserted/updated or deleted by destination from the log?

Thank you,
Ccote

View Replies !   View Related

---

Sql Server 2005 And Stored Procedures - Updated Date?
Hi,

I was wondering, is it really true that in Sql Server 2005, there is no updated date -property for stored procedures? There is a created date -property, but it's not useful, because stored procedure's get updated often. This is a huge disadvantage for me, and I was really waiting for ms to fix this problem after sql server 2000, but no. Does anyone figured out any solution to this problem?

Br,
Riika

View Replies !   View Related

---

Get Total Updated Rows Effected By A Statement
This was a usual day today in office and i was working on a requirement in which i was needed to fetch the total number of rows effected by an update query, so I asked my best code mate "Google" and to my surprised there was not enough correct answers at least the one i was looking for.There were suggestions that  you can use a select statement for the updated rows and make it like a select (count) which works fine, but just looking into the SQL server books online, it shows that there is even a better way to do it.After the update statement in my  stored procedure i used "@@ROWCOUNT" with a select statement and it works like a charm.so the little find for my first ever post on asp.net is that there is a better way to find the total updated rows by a query Example: DB: Northwind , Table Employeesupdate employees set extension='1234'select @@ROWCOUNT  This will return 9 (default rows in this table) as the rows effectedHope this helps 

View Replies !   View Related

---

Fetch Only Inserted And Updated Rows From Source
Hi,
I am trying to create a SSIS package, which will extract data from a SQL server view and populate the data in our local SQL server database tables. My objective is to get the data from the view such that only inserted and updated rows are fetched from the view.
Note: the view does not expose any updated date type of column thru which I can check. So I guess I have to compare each and every field with my destination table row's fields.

I would appreciate any suggestions on how to approach the problem.
Thanks in advance.

View Replies !   View Related

---

Undo Management In Sql Server 200
hai to every one,

i am pavan working as oracle dba. in oracle we have undo table space.
when we issue rollback oracle gets old image from undo tablespace.

in sql server where it gets from old image.

who performs instance crash recovery(which back ground is responsible for it)

in sql server we have logwriter, lazy writers(back ground processes)
what are the other processess.

and some doubts are

how insert query works
how update query works,
how select query works.

means i issue update statement. command successfully executed. late issue rollback, from where sql server gets old imege of the data

please send me any archetecture book /pdf/online link

thanks
kumar

pavan
Associate Oracle DBA

View Replies !   View Related

---

ERROR - The Row Value(s) Updated Or Deleted Either Do Not Make The Row Unique Or They Alter Multiple Rows.
i am getting the above error on my database i have 2 rows with the same info on and another 2 with the same info on.  example:

ID    username   password

1            bob       bob

1            bob       bob

1           john       john

1           john        john

 

I know this is a fault with ms sql 2005 however how do i fix it?

Ive found this link which explains everything but how do i start a query.  I tried clicking on new query and copying the code.  What is table1 meant to be?  the database is dbl.tbl_admin.  It wont find my database.

Im not sure how to do it anyway.

I need to change it though as its my admin password and Ive given it out to web design companys

http://geekswithblogs.net/allensb/archive/2006/07/27/86484.aspx

Can some 1 read the above page and give me full instructions, I dont know what im doing thanks

info@uktattoostudios.co.uk

View Replies !   View Related

---

Linked Reports Not Being Updated When Master Report Is Updated
Since updating to SQL Server 2005 SP2 I've noticed two things about Linked Reports.
 
1.  I do a lot of 'Snapshot' reports.  With SP-1 if I updated a master report and made any changes to the Parameter List - it undid all my custom parameter changes on linked versions (restored to the Master Reports Defaults).  While this is no longer happening with SP2 - it is still 'unhiding' the parameters.
 
2.  With SP-1 if I added/deleted columns or made other changes to the report structure - the linked reports would pick up on the changes with their next refresh.  With SP-2 I'm finding that I have to 'Re-link' the linked report back to the master report before the changes are refreshed.  This is very time consuming especially with each report having 8 or more Snapshot reports pre-set up.
 
Am I missing something - or is this a 'bug'...
 
Any help would be appreciated...

View Replies !   View Related

---

Help With Trigger: Updated Oct 11, 2005
Nevermind, I'll just use a stored procedure. Update: I've figured out what is going wrong now. I'm trying to find the subaccounts from the old invoice using the new invoicedate. This is doomed to fail! I've worked out a way to save the old invoice date in the C# programming, but is there anyway to make that value accessible to the trigger? Note that there will be nothing useful in the deleted table--this trigger is on inserts only. Any help is appreciated!

View Replies !   View Related

---

(sql 2005) How To Get The Record I Just Updated By Mistake
Hi,
I was opening a web page, that has a grid view representing the records of a table, I updated a record of the sql table by mistake, but I am not sure which record,
is there any way in Sql server to get the last record just updated few minutes ago. I hyave admin permissions on the DB.

Also, is there a way to know the value that was just there before the changes?

Thanks a lot.

View Replies !   View Related

---

Save Updated Date When Row Is Updated
Hi,I want to save the last modification date when the row is updated. I have a column called "LastModification" in the table, every time the row is update I want to set the value of this column to the current date. So far all I know is that I need to use a trigger and the GetDate() function, but could any body help me with how to set the value of the column to getdate()? thanks for your help. 

View Replies !   View Related

---

Using SSIS 2005 To Strip Out Bad Rows In Excel And Then Insert Detailed Rows Into OLE DB Data Source
Environment:
 
Running this code on my PC via VS 2005
.Net version 2.0.50727 on the server (shown in IIS)
Code is in ASP.NET 2.0 and is a VB.NET Console application
SSIS 2005
 
Problem & Info:
 
I am bringing in an Excel file.  I need to first strip out any non-detail rows such as the breaks you see with totals and what not.  I should in the end have only detail rows left before I start moving them into my SQL Table.  I'm not sure how to first strip this information out in SSIS specfically how down to the right component and how to actually code the component to do this based on my Excel file here: http://www.webfound.net/excelfile.xls

Then, I assume I just use a Flat File Source coponent or something to actually take the columns in the Excel and split into an OLE DB Datasource to shove each column into a corresponding column in my SQL Server Table.  I have used a Flat File Source in the past to do so with a comma delimited txt file but never tried with an Excel.
 
Desired Help:

 
How to perform
 
1)       stripping out all undesired rows
2)       importing each column into sql table

View Replies !   View Related

---

SQL 2000 To SQL 2005 Upgrade Error - Database Down - Updated - Help Appreciated
SQL 2000 to SQL 2005 Upgrade Error - Database Down - Help Appreciated

I am upgrading a SQL 2000 standard database server to SQL 2005 standard on a windows 2003 server

I am logged in as domain admin and started the upgrade as 'sa'

The upgrade stops with the error:

Service MSSQLSERVICE can not be started. Verify you have sufficient privilages to start system services. The error code is (17185)

The error log shows:

2007-01-04 15:59:38.77 Server      Authentication mode is MIXED.

2007-01-04 15:59:38.79 Server      Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)

 Oct 14 2005 00:33:37

 Copyright (c) 1988-2005 Microsoft Corporation

 Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)

 

2007-01-04 15:59:38.79 Server      (c) 2005 Microsoft Corporation.

2007-01-04 15:59:38.79 Server      All rights reserved.

2007-01-04 15:59:38.79 Server      Server process ID is 4188.

2007-01-04 15:59:38.79 Server      Logging SQL Server messages in file 'F:SQLDataMSSQLlogERRORLOG'.

2007-01-04 15:59:38.79 Server      This instance of SQL Server last reported using a process ID of 2980 at 1/4/2007 3:56:58 PM (local) 1/4/2007 2:56:58 AM (UTC). This is an informational message only; no user action is required.

2007-01-04 15:59:38.79 Server      Registry startup parameters:

2007-01-04 15:59:38.79 Server        -d F:SQLDataMSSQLdatamaster.mdf

2007-01-04 15:59:38.79 Server        -e F:SQLDataMSSQLlogERRORLOG

2007-01-04 15:59:38.79 Server        -l F:SQLDataMSSQLdatamastlog.ldf

2007-01-04 15:59:38.79 Server      Command Line Startup Parameters:

2007-01-04 15:59:38.79 Server        -s MSSQLSERVER

2007-01-04 15:59:38.79 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.

2007-01-04 15:59:38.79 Server      Detected 4 CPUs. This is an informational message; no user action is required.

2007-01-04 15:59:38.83 Server      Set AWE Enabled to 1 in the configuration parameters to allow use of more memory.

2007-01-04 15:59:39.02 Server      Using the static lock allocation specified in the locks configuration option.  Allocated 20000 Lock blocks and 20000 Lock Owner blocks per node.  This is an informational message only. No user action is required.

2007-01-04 15:59:39.02 Server      Multinode configuration: node 0: CPU mask: 0x0000000a Active CPU mask: 0x0000000a. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.

2007-01-04 15:59:39.04 Server      Multinode configuration: node 1: CPU mask: 0x00000005 Active CPU mask: 0x00000005. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.

2007-01-04 15:59:39.04 Server      Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.

2007-01-04 15:59:41.04 Server      Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.

2007-01-04 15:59:41.04 Server      Database Mirroring Transport is disabled in the endpoint configuration.

2007-01-04 15:59:41.04 spid7s      Starting up database 'master'.

2007-01-04 15:59:41.05 spid7s      1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.

2007-01-04 15:59:41.07 spid7s      0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.

2007-01-04 15:59:41.07 spid7s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.

2007-01-04 15:59:41.08 spid7s      SQL Trace ID 1 was started by login "sa".

2007-01-04 15:59:41.08 spid7s      Starting up database 'mssqlsystemresource'.

2007-01-04 15:59:41.11 spid7s      Using 'dbghelp.dll' version '4.0.5'

2007-01-04 15:59:41.11 spid7s      ***Stack Dump being sent to F:SQLDataMSSQLLOGSQLDump0035.txt

2007-01-04 15:59:41.11 spid7s      SqlDumpExceptionHandler: Process 7 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.

2007-01-04 15:59:41.11 spid7s      * *******************************************************************************

2007-01-04 15:59:41.11 spid7s      *

2007-01-04 15:59:41.11 spid7s      * BEGIN STACK DUMP:

2007-01-04 15:59:41.11 spid7s      *   01/04/07 15:59:41 spid 7

2007-01-04 15:59:41.11 spid7s      *

2007-01-04 15:59:41.11 spid7s      *

2007-01-04 15:59:41.11 spid7s      *   Exception Address = 78144D3A Module(MSVCR80+00014D3A)

2007-01-04 15:59:41.11 spid7s      *   Exception Code    = c0000005 EXCEPTION_ACCESS_VIOLATION

2007-01-04 15:59:41.11 spid7s      *   Access Violation occurred reading address 0000001E

2007-01-04 15:59:41.11 spid7s      * 

2007-01-04 15:59:41.11 spid7s      *

2007-01-04 15:59:41.11 spid7s      *  MODULE                          BASE      END       SIZE

2007-01-04 15:59:41.11 spid7s      * sqlservr                       01000000  02BA7FFF  01ba8000

2007-01-04 15:59:41.11 spid7s      * ntdll                          7C800000  7C8BFFFF  000c0000

2007-01-04 15:59:41.11 spid7s      * kernel32                       77E40000  77F41FFF  00102000

2007-01-04 15:59:41.11 spid7s      * MSVCR80                        78130000  781CAFFF  0009b000

2007-01-04 15:59:41.11 spid7s      * msvcrt                         77BA0000  77BF9FFF  0005a000

2007-01-04 15:59:41.11 spid7s      * MSVCP80                        7C420000  7C4A6FFF  00087000

2007-01-04 15:59:41.11 spid7s      * ADVAPI32                       77F50000  77FEBFFF  0009c000

2007-01-04 15:59:41.11 spid7s      * RPCRT4                         77C50000  77CEEFFF  0009f000

2007-01-04 15:59:41.11 spid7s      * USER32                         77380000  77411FFF  00092000

2007-01-04 15:59:41.11 spid7s      * GDI32                          77C00000  77C47FFF  00048000

2007-01-04 15:59:41.11 spid7s      * CRYPT32                        761B0000  76242FFF  00093000

2007-01-04 15:59:41.11 spid7s      * MSASN1                         76190000  761A1FFF  00012000

2007-01-04 15:59:41.11 spid7s      * Secur32                        76F50000  76F62FFF  00013000

2007-01-04 15:59:41.11 spid7s      * MSWSOCK                        71B20000  71B60FFF  00041000

2007-01-04 15:59:41.11 spid7s      * WS2_32                         71C00000  71C16FFF  00017000

2007-01-04 15:59:41.11 spid7s      * WS2HELP                        71BF0000  71BF7FFF  00008000

2007-01-04 15:59:41.11 spid7s      * USERENV                        76920000  769E3FFF  000c4000

2007-01-04 15:59:41.11 spid7s      * opends60                       333E0000  333E6FFF  00007000

2007-01-04 15:59:41.11 spid7s      * NETAPI32                       71C40000  71C97FFF  00058000

2007-01-04 15:59:41.11 spid7s      * SHELL32                        7C8D0000  7D0D2FFF  00803000

2007-01-04 15:59:41.11 spid7s      * SHLWAPI                        77DA0000  77DF1FFF  00052000

2007-01-04 15:59:41.11 spid7s      * comctl32                       77420000  77522FFF  00103000

2007-01-04 15:59:41.11 spid7s      * psapi                          76B70000  76B7AFFF  0000b000

2007-01-04 15:59:41.11 spid7s      * instapi                        48060000  48069FFF  0000a000

2007-01-04 15:59:41.11 spid7s      * sqlevn70                       4F610000  4F7A0FFF  00191000

2007-01-04 15:59:41.11 spid7s      * SQLOS                          344D0000  344D4FFF  00005000

2007-01-04 15:59:41.11 spid7s      * rsaenh                         68000000  6802EFFF  0002f000

2007-01-04 15:59:41.11 spid7s      * AUTHZ                          76C40000  76C53FFF  00014000

2007-01-04 15:59:41.11 spid7s      * MSCOREE                        61FB0000  61FF4FFF  00045000

2007-01-04 15:59:41.11 spid7s      * ole32                          77670000  777A3FFF  00134000

2007-01-04 15:59:41.11 spid7s      * msv1_0                         76C90000  76CB6FFF  00027000

2007-01-04 15:59:41.11 spid7s      * iphlpapi                       76CF0000  76D09FFF  0001a000

2007-01-04 15:59:41.11 spid7s      * kerberos                       62220000  62277FFF  00058000

2007-01-04 15:59:41.11 spid7s      * cryptdll                       766E0000  766EBFFF  0000c000

2007-01-04 15:59:41.11 spid7s      * schannel                       76750000  76776FFF  00027000

2007-01-04 15:59:41.11 spid7s      * COMRES                         77010000  770D5FFF  000c6000

2007-01-04 15:59:41.11 spid7s      * XOLEHLP                        622E0000  622E5FFF  00006000

2007-01-04 15:59:41.11 spid7s      * MSDTCPRX                       622F0000  62367FFF  00078000

2007-01-04 15:59:41.11 spid7s      * msvcp60                        780C0000  78120FFF  00061000

2007-01-04 15:59:41.11 spid7s      * MTXCLU                         62370000  62388FFF  00019000

2007-01-04 15:59:41.11 spid7s      * VERSION                        77B90000  77B97FFF  00008000

2007-01-04 15:59:41.11 spid7s      * WSOCK32                        71BB0000  71BB8FFF  00009000

2007-01-04 15:59:41.11 spid7s      * OLEAUT32                       77D00000  77D8BFFF  0008c000

2007-01-04 15:59:41.11 spid7s      * CLUSAPI                        62390000  623A1FFF  00012000

2007-01-04 15:59:41.11 spid7s      * RESUTILS                       623B0000  623C2FFF  00013000

2007-01-04 15:59:41.11 spid7s      * DNSAPI                         76ED0000  76EF8FFF  00029000

2007-01-04 15:59:41.11 spid7s      * winrnr                         76F70000  76F76FFF  00007000

2007-01-04 15:59:41.11 spid7s      * WLDAP32                        76F10000  76F3DFFF  0002e000

2007-01-04 15:59:41.11 spid7s      * rasadhlp                       76F80000  76F84FFF  00005000

2007-01-04 15:59:41.11 spid7s      * security                       62800000  62803FFF  00004000

2007-01-04 15:59:41.11 spid7s      * dbghelp                        671B0000  672C7FFF  00118000

2007-01-04 15:59:41.11 spid7s      *

2007-01-04 15:59:41.11 spid7s      *        Edi: 62FA0040:  62FA0028  671AFFF0  00000000  00000000  00000000  00000000 

2007-01-04 15:59:41.11 spid7s      *        Esi: 0000001E: 

2007-01-04 15:59:41.11 spid7s      *        Eax: 0416C05E:  C0400096  C0400416  00000416  000062FA  00000000  00000000 

2007-01-04 15:59:41.11 spid7s      *        Ebx: 0416C040:  0105F270  00002000  00000005  00000000  3368C1E0  00000000 

2007-01-04 15:59:41.11 spid7s      *        Ecx: 0105B010:  458B0046  01F88348  00D3850F  458B0000  89C23B50  0F342444 

2007-01-04 15:59:41.11 spid7s      *        Edx: 00000000: 

2007-01-04 15:59:41.11 spid7s      *        Eip: 78144D3A:  24FFA5F3  144E5495  C78B9078  000003BA  04E98300  E0830C72 

2007-01-04 15:59:41.11 spid7s      *        Ebp: 33D6E770:  33D6E790  01C65B97  62FA0040  0000001E  0416C040  0416C6DC 

2007-01-04 15:59:41.11 spid7s      *      SegCs: 0000001B: 

2007-01-04 15:59:41.11 spid7s      *     EFlags: 00010212:  0020006D  00690046  0065006C  005C0073  006F0043  006D006D 

2007-01-04 15:59:41.11 spid7s      *        Esp: 33D6E768:  62FA0040  33D6E7A4  33D6E790  01C65B97  62FA0040  0000001E 

2007-01-04 15:59:41.11 spid7s      *      SegSs: 00000023: 

2007-01-04 15:59:41.11 spid7s      * *******************************************************************************

2007-01-04 15:59:41.11 spid7s      * -------------------------------------------------------------------------------

2007-01-04 15:59:41.11 spid7s      * Short Stack Dump

2007-01-04 15:59:41.13 spid7s      78144D3A Module(MSVCR80+00014D3A)

2007-01-04 15:59:41.13 spid7s      01C65B97 Module(sqlservr+00C65B97)

2007-01-04 15:59:41.13 spid7s      01CA43B5 Module(sqlservr+00CA43B5)

2007-01-04 15:59:41.13 spid7s      01CA452E Module(sqlservr+00CA452E)

2007-01-04 15:59:41.13 spid7s      0217D3BD Module(sqlservr+0117D3BD)

2007-01-04 15:59:41.13 spid7s      0217B896 Module(sqlservr+0117B896)

2007-01-04 15:59:41.13 spid7s      0100889F Module(sqlservr+0000889F)

2007-01-04 15:59:41.13 spid7s      010089C5 Module(sqlservr+000089C5)

2007-01-04 15:59:41.13 spid7s      010086E7 Module(sqlservr+000086E7)

2007-01-04 15:59:41.13 spid7s      010D764A Module(sqlservr+000D764A)

2007-01-04 15:59:41.13 spid7s      010D7B71 Module(sqlservr+000D7B71)

2007-01-04 15:59:41.13 spid7s      010D746E Module(sqlservr+000D746E)

2007-01-04 15:59:41.13 spid7s      010D83F0 Module(sqlservr+000D83F0)

2007-01-04 15:59:41.13 spid7s      781329AA Module(MSVCR80+000029AA)

2007-01-04 15:59:41.13 spid7s      78132A36 Module(MSVCR80+00002A36)

2007-01-04 15:59:41.13 spid7s      Stack Signature for the dump is 0x2BEDE9E0

2007-01-04 15:59:41.27 spid7s      External dump process return code 0x20000001.

External dump process returned no errors.


2007-01-04 15:59:41.27 spid7s      Error: 17185, Severity: 16, State: 1.

2007-01-04 15:59:41.27 spid7s      Unable to update password policy.

2007-01-04 15:59:41.27 spid7s      SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

Any clues?

Cheers

Paul

View Replies !   View Related

---

Recently Updated To Sql 2005 From Sql 2000 Now Recieving Locking Problems
 

Good afternoon everyone,
 
I hope that I am not asking a question which has been answered many times in the past, I did a search but could not find an answer. These may be beginner questions, so bear with me as I am something of a beginner.
 
This week our organization updated from SQL 2000 to SQL 2005. We are using a Microsoft Access front end for this data and the information is entered through forms into the correct tables. When our researchers are enter the information they also have to sometimes search existing information to ensure they do not duplicate what is already in there. For this we use several access queries. This has worked well on the SQL 2000 server without any issues. However, now that we are on 2005 we are starting to recieve ODBC Call fail errors and errors which specify that they are a result of a deadlock. My first question is, are the ODBC call fail errors possibly locks which caused the ODBC connection to time out? My second question is why am I recieving these errors in 2005 but not 2000?
 
 
Thanks in advance for any help
 
- Hitz

View Replies !   View Related

---

Xp_AvailableMedia Returns 0 Rows In SQL Server 2005
Without systemAdmin role, xp_AvailableMedia can still run (after granting execute permission) but just return 0 rows.

 

It seems we have to give the user SystemAdmin role, in order to get the list of devices in SQL 2005, while in previous versions of SQL Server, the user granted the execute permission for xp_AvailableMedia will be able to get the list of devices.

 

Is this be design? Is there any way the a NON-SA user can retrieve device list? If yes, what extra permissions do we have grant?

 

Thanks in advance for your help.

 

Frank

 

 

View Replies !   View Related

---

Maximum # Of Rows In SQL Server Express 2005
Hi,
 
I have a DB running for a while, but it reached 32767 rows and stopped.. The DB is only 20MB big. Where can i ajdust this setting to a bigger number of rows?
 
thxs.

View Replies !   View Related

---

How To Insert More Number Of Rows Into Sql Server 2005 Database At Once.
Hi,
Good morning to all.My table: User_Group_Map(UserID UNIQUEIDENTIFIER,GroupID UNIQUEIDENTIFIER)
Now, I want to write one stored procedure that can insert rows into the above table, but more number of rows at-once.
Means, the program should allow multiple insertions without the need to call the stored procedure from front-end more number of times.
Can anyone please help me on this...
Thanks in advance...Ashok kumar.

View Replies !   View Related

---

SQL Server 2005 Charts - Using Database Rows Rather Than Columns
I'm using Visual Studio 2005 and SQL Server 2005. I am creating a report to put on the Internet using C# and other .NET features. I'm building several charts using database information extracted from Microsoft Excel. I can make charts based on the data from columns using the categories, series, and values on the Data tab of chart properties. However, when I create a query that grabs a record ( a row) from a database, it forces me to use the field values even though each field contains only one value.

 

Basically, I want to take a row from a database and make it my x-axis data values and another row (record) from a database and make it my y-axis data values.

 

I'd prefer not to change the format in the database, if possible. Thanks in advance.

View Replies !   View Related

---

Undo Last Statement
Is there anyway in SQL Server to rollback an SQL statement which wasalready executed. I know there is a transaction log but what itcontains and how it works is still a mystery to me.Assuming I delete all records from a table - can I somehow undo this?

View Replies !   View Related

---

Undo Mechanism
Hello all,

I know that Oracle uses undo table spaces or rollback segments as its undo mechanism. what does Microsoft SQL Server use as its undo mechanism?

Krz

View Replies !   View Related

---

How To Undo Changes In A Db (by Using Logs) ...
Hello !

I have a big problem. I need to go back un changes that had been since the a specific date (beginning of november in my case).

Thanks a lot for any help on how to do this !

Regards,
Fabianus

my favorit hoster is ASPnix : www.aspnix.com !

View Replies !   View Related

---

With Standby UNDO
I'm confused how the undo works when you restore WITH STANDBY

Suppose I restore WITH STANDBY

FULL
DIFF
LOG A
LOG B
LOG C

How do I undo LOG C? Do I restore LOG B again?

View Replies !   View Related

---

Killing Sp, Undo All Statements In It?
if we kill sp, let's say, on the third statement, will the first two
be rolled back (undo) ?

View Replies !   View Related

---

Does The Undo Operation Work ?
Hi ,

I was working in the SSIS designer and when I found that the DataFlow task I deleted was indeed something I needed, I tried to Undo the operation but Alas the option is not enabled :(

Is there a way we can undo the operations?

View Replies !   View Related

---

Undo Insert/ Update
 

Hi
Can somebody advice me on this:
 
I am trying to update a row, which is being pulled from another table.
 
i.e., I have two tables T1 and T2
 
I am getting a row from T2 and inserting it in T1
then I am updating that row in T1
 
What i want is if in case these is an error while updating this row I want to remove the row from T1
T1 and T2 are same.
 
declare @err1 int

--BEGIN TRANSACTION

INSERT INTO dbo.T1 SELECT * FROM dbo.T2 WHERE UpdateFlag = 'Y' AND ID = '12345'

BEGIN TRY

UPDATE dbo.T1 set ReportDate= '9910-12-2006'

SET @Err1 = @@error

END TRY

BEGIN CATCH

insert into errorlog values (error_message())

END CATCH

 

--if @err1<>0

--begin

--Rollback transaction

--end

 
This work fine but I am not able to roll back the transaction
 
When I activate the codes fro roll back, it not performing the Logging operation in CATCH also terminating
 
REQUIREMENT
 
1) Get the record in T1 from T2
2) Update the record in T1
3) IF step:3 good commit it, else remove the only the row which was pulled from T2. It must do this also log in dbo.ErrorLog the errored system message error_message()
 
Thanks a lot in advance
 
 
 
 
 
 
 
 
 
 

View Replies !   View Related

---

Undo Restore (Urgent)
Muhammad Qasim writes "i hav query that i was just taking the backup of the database n by mistake i just clicked restore as the wizards are similar so i just restored the database to 10days old backup n now i have no latest backup so how can i just undo this restore if u hav any idea of how to overcome this plz reply as early possible lookin for replies"

View Replies !   View Related

---

BIDS Undo Button
How come Undo button does not work? Thanks.

View Replies !   View Related

---

How To Undo The Last Sql Command Run In Query Analyzer
 I often run queries in Query analyzer. Today I accidentaly deleted some data from a table. Is their a way to undo the last SQL command executed?I have heard of the rollback command, but I don't know if that is applicable or not?

View Replies !   View Related

---

Query Editor Undo Buffers
Does anyone else feel limited by (only) 20 undo buffers in the Query Analyzer editor? And does anyone know how to boost it? Thanks!

View Replies !   View Related

---

Point In Time, UNDO/Restore
I have full Recovery mode.

I just accidently deleted a handful of records out of a table about 10 minutes ago. My last backup was last night.

Can I go back 10 minutes ago for a specific table? If so how... DO I need to backup now, then use the trans-logs to recover up to a specific point?

Thanks!!

View Replies !   View Related

---

Undo Functionality In Data Driven Application
 

Hi,
 
I am in a process of designing a web application (ASP.NET) which is mostly data driven. The application needs to provide an undo functionality to users for eg. Undo an Add, Update or Delete that has been already committed to the database.
 
We are using SQL Server 2005 at back end. What I need to know is how will I enable this feature at database level. I am sure we might have to play with triggers but that too might not help in achieving the UNDO functionality. If anyone can shed light on how to achieve this, it will be quite helpful. Thanks

View Replies !   View Related

---

Cube Collection Has Been Updated On The Server
I deployed some changes I made to a cube but the web application (which is running on the same server) fails with an error "The Cubes collection has been updated on the server".
I've rebuilt the web app but the failure still exists. What is the process to follow when a new cube has been updated?
 
thx,
-Marilyn

View Replies !   View Related

---

Variables Not Getting Updated From SQL Server Configuration
 I have three variables that are stored in an SQL Server configuration table. When I execute the package, they do not seem to be getting updated. At what point do the configurations get loaded?

View Replies !   View Related

---

How Can I Detect Changes Automatically In The SQL Server Database When Anything Is Updated..?
I been asked recently in the interview thatHow can I detect changes automatically in the SQL Server Database when anything is updated, deleted or inserted?if anyone can help me in this that will be really great.
I dont actually know whether I can ask this here but I wanted to know the answer for this and thought this might be right place to ask?
sorry if I am wrong?
Thanks in Advance

View Replies !   View Related

---

Cube Has Been Updated By The Server, Data Is Now Obsolete
Client issues query which sends out individual requests to the 2 OLAP servers that are load balanced. The client evaluates the versions of the returned record sets to ensure the consist data being returned for one single query. Otherwise, this error will be seen:

The cube has been updated by the server the data is now obsolete.

These servers sit behind a cisco 11506 CSS with load balancing based on balance type: least busy server, also persistence based on cookies.

My developer says this worked fine for a long time then just 'started happening'.

any suggestions are appreciated.

View Replies !   View Related

---

How To Get Data Updated Every 5 Mins From Remote Server
Dear friends, We have a server put at US side and we are trying to load the data into another related database in India site, now the thing is that we want to update India data at an interval of 5 mins?

Is there any way to do it without effecting the performance of the US server?

thanks,

View Replies !   View Related

---

To Validate # Of Excel Rows(source) And Sql Server Table(destination) Rows Are Equal
Hi,
 
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
 
How can we handle transactions in SSIS
1. when some error/something happens during export and the # of rows are not exported fully to destination, how to rollback the transaction in SSIS. 
 
Any sort of help would be highly appreciated.
 
Thanks,
 

View Replies !   View Related

---

To Validate # Of Excel Rows(source) And Sql Server Table(destination) Rows Are Equal
Hi,
 
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
 
Any sort of help would be highly appreciated.
 
Thanks,
 

View Replies !   View Related

---

Using Triggers To Get Recently Updated Info In SQL Server 2000
Hello all,

I am trying to change values of two tables in my sql server 2000 database. When one of the tables is modified in some way like adding/updating a record, I need a trigger procedure to copy this new data from the first table to the second. Problem is, how do I get the newly inserted or updated data from the first table? How do I specify that I only want the data which caused the trigger to execute? Anyone know?

Thanks,
Bob

View Replies !   View Related

---

Import/Restore/Transfer, Only Updated/Changed/New Values Between Two SQL Server Over Dialup Connection.
HelpTopic: Import/Restore/Transfer, Only Updated/Changed/New ValuesBetween Two SQL Servers Over Dialup Connection.--Hi All,I need a little helping hand/Tips:The Problem & Situation: One of the client have 7 Branches in differentparts of country. Now on Month End Closings, database backups are senton CDs through Express Mail, which usually gets to the head office abit late and due to that, many Post-Month-End Process in head officeremain Pending.Is there any way we can get ALL or Updated/New/Changed Values betweenTwo SQL Servers (from source to head office) Once-or-Twice A Weekthrough DIAL-UP/TELEPHONIC Connection, as few branches can only beaccessed Online through Telephone Line.We are using MS SQL Server 7 & 2000. And there are around 350 tables ina single database.Any Help/Hints/Tools, etc will highly be appreciatedThanks In AdvanceRegardsTahirJoin Bytes!+92(304)ADD-ALL-7 (+92(304)233-255-7)

View Replies !   View Related

---

Undo A &"delete Tbl_test&" TSQL Statement
I accidentaly deleted data from the wrong table. Is there a way to un-delete what I had deleted.

need help ASAP.

Regards,
Steve

View Replies !   View Related

---