Using SSIS 2005 To Strip Out Bad Rows In Excel And Then Insert Detailed Rows Into OLE DB Data Source
Environment:
Running this code on my PC via VS 2005
.Net version 2.0.50727 on the server (shown in IIS)
Code is in ASP.NET 2.0 and is a VB.NET Console application
SSIS 2005
Problem & Info:
I am bringing in an Excel file. I need to first strip out any non-detail rows such as the breaks you see with totals and what not. I should in the end have only detail rows left before I start moving them into my SQL Table. I'm not sure how to first strip this information out in SSIS specfically how down to the right component and how to actually code the component to do this based on my Excel file here: http://www.webfound.net/excelfile.xls
Then, I assume I just use a Flat File Source coponent or something to actually take the columns in the Excel and split into an OLE DB Datasource to shove each column into a corresponding column in my SQL Server Table. I have used a Flat File Source in the past to do so with a comma delimited txt file but never tried with an Excel.
Desired Help:
How to perform
1) stripping out all undesired rows
2) importing each column into sql table
View Complete Forum Thread with Replies
Related Forum Messages:
To Validate # Of Excel Rows(source) And Sql Server Table(destination) Rows Are Equal
Hi, When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message. How can we handle transactions in SSIS 1. when some error/something happens during export and the # of rows are not exported fully to destination, how to rollback the transaction in SSIS. Any sort of help would be highly appreciated. Thanks,
View Replies !
How Do I Extract Data From Selected Rows From My Excel Source File?
The columns in my excel source contain data of different types with the column name being a string and the data in those columns being integers. Is there any way to only extract numeric data , in short I want column names to be omitted. Also the data is distributed unevenly , beggining at various rows in each column. Thanking in advance :)
View Replies !
Excel Source Not Reading Newly/appended Rows
I am trying to ETL from excel source to SQL table. When I created the package my excel had certain number of rows. Later if I add (append) few more rows in the spreadsheet ... the ssis package (also in excel source preview) not reading the newly added rows. Suprisingly it is reading new rows if they are inserted in between existing rows. Any idea why ?
View Replies !
Ignore First 6 Rows In Excel Import In SSIS Pkg.
I have an SSIS package that imports from an Excel file with data beginning in the 7th row. Unlike the same operation with a csv file ('Header Rows to Skip' in Connection Manager Editor), I can't seem to find a way to ignore the first 6 rows of an Excel file connection. I'm guessing the answer might be in one of the Data Flow Transformation objects, but I'm not very familiar with them. Any pointers would be greatly appreciated. Eric
View Replies !
SSIS - Slowly Changing Dimension - Detect Deleted Rows From The Source
Hi all, Can you help me to resolve my problem ? I have to do a simple daily backup system. Source : Flat File; Destination : SQL Server. I want to use the Slowly Changing Dimension component to backup only the new and updated row from my source (Flat File) and put them into SQL Server. But how can I do to detect deleted rows from my source ? Any suggestions ? If it's not clear enough, please ask for more details ! GO
View Replies !
Ssis Package Design To Load Only Rows Which Are Changed From Exisiting Rows.
Hi i tried designing a SSIS package which loads only those rows which were different from existing rows in the table , i need to timestamp the existing row with an inactive date when a update of that row is inserted (ex: same studentID ) and the newly inserted row with a insert time stamp so as to indicate the new row as currently active, in short i need to maintain history and current rows in same table , i tried using slowly changing dimension but could not figure out, anyone experience or knowledge regarding the Data loads please respond. example of Data would be like exisiting data StudentID Name AGE Sex ADDRESS INSERTTIME UPDATETIME 12 DDS 14 M XYZ ST 2/4/06 NULL 14 hgS 17 M ABC ST 3/4/07 NULL New row to insert would be 12 DDS 15 M DFG ST 4/5/07 the data should reflect StudentID Name AGE Sex ADDRESS INSERTTIME UPDATETIME 12 DDS 14 M XYZ ST 2/4/06 4/5/07 12 DDS 15 M DFG ST 4/5/07 NULL 14 hgS 17 M ABC ST 3/4/07 NULL Please provide your input as much as you can even though it might not be a 100% solution.
View Replies !
Updating Multimple Rows In A Data Source
I have a sql data source that is filtered by a date range. The results are then presented in a Gridview. What I am hoping to do is add a button that will update all the filtered rows in the sql data source. Is this possible? The data source is shown below: <asp:SqlDataSource ID="SqlDataSource3" runat="server" ConnectionString="<%$ ConnectionStrings:MYSTR%>" SelectCommand="SELECT * FROM [dbo_cheques] WHERE (([chq_banked] >= @chq_banked) AND ([chq_banked] <= @chq_banked2))" UpdateCommand="UPDATE dbo_cheques SET chq_printed = @chq_printed WHERE (chq_id = @chq_id)"> <SelectParameters> <asp:ControlParameter ControlID="Calendar1" Name="chq_banked" PropertyName="SelectedDate" Type="DateTime" /> <asp:ControlParameter ControlID="Calendar2" Name="chq_banked2" PropertyName="SelectedDate" Type="DateTime" /> </SelectParameters> <UpdateParameters> <asp:Parameter Name="chq_printed" /> <asp:Parameter Name="chq_id" Type="Int32" /> </UpdateParameters> </asp:SqlDataSource>
View Replies !
Empty Rows In Excel Data Sheet Used In DTS
Hi Everyone, I am using a DTS package where one of the inputs is an Excel Sheet. Actually this sheet is updated manually whenever required i.e once a week or sometimes once a month, but the DTS package runs everyday. Whenever new rows are added or deleted manually in the excel sheet, empty rows are showed in the sheet after the last row of data. This hinders the DTS package, because the destination table to which the data in the Excel sheet is sent has Primary keys in it. Can anyone suggest me how to avoid getting the empty spaces in the excel sheet. Thanks in advance. Regards, kalyan
View Replies !
Importing Excel Data That Spans Rows
Hi, I need to import and transform data from an Excel spread sheet where the information spans two rows. The file layout is something like: Row1Product1 QTY Store1 Store2 Store3 ... Row2Product1 AMT Store1 Store2 Store3 Row3Product2 QTY Store1 Store2 Store3 Row4Product2 AMT Store1 Store2 Store3 The output would look like Product1 Store1 QTY AMT Product1 Store2 QTY AMT ... Product2 Store1 QTY AMT Product2 Store2 QTY AMT ... We currently use a VB6 program using Office Tools to handle this. Is there a way to handle this with the out-of-the-box SSIS? Thanks in advance, John
View Replies !
Flat File Data Flow Source Returning Limited Rows
All, I'm having an issue with the Flat File Data Flow Source returning only a limited set of the rows that are in the flat file. Basically, I connect to the flat file fine, it goes to retrieve the data (tab delimited file) and only returns 190 of 392 rows. Is there a limitation on the # of rows this data flow source can retrieve or something? I've look all through the settings and properties of the task as well as the connection manager and nothing is obvious as to what is causing this. Hopefully someone ou tthere has run into this before and can help me retrieve all rows. Thanks in advance! bakerz
View Replies !
SRS 2005 Excel Rendering Limitations Cannot Exceed 65,000 Rows
Okay, when will SRS 2005 support Office 2007 extensions. I find it hard to believe that a service pack has not been releaseed to support Office 2007. If there is I apologize in advance for this message. Info: Microsoft.ReportingServices.ReportProcessing.WrapperReportRenderingException: An error occurred during rendering of the report. ---> Microsoft.ReportingServices.ReportRendering.ReportRenderingException: An error occurred during rendering of the report. ---> System.Exception: Excel Rendering Extension : Number of rows in the Excel sheet exceeded the limit of 65536 rows.
View Replies !
How To Insert Rows Into Sql Ce From 2005
Hi! I have a database in Sql Server 2005 and I want to transfer the data from 2005 to the Sql Server CE database. I've created a number of tables in CE but how do I write sql to transfer data? Jesus saves. But Gretzky slaps in the rebound.
View Replies !
Arranging Data On Multiple Rows Into A Sigle Row (converting Rows Into Columns)
Hello, I have a survey (30 questions) application in a SQL server db. The application uses several relational tables. The results are arranged so that each answer is on a seperate row: user1 answer1user1 answer2user1 answer3user2 answer1user2 answer2user2 answer3 For statistical analysis I need to transfer the results to an Excel spreadsheet (for later use in SPSS). In the spreadsheet I need the results to appear so that each user will be on a single row with all of that user's answers on that single row (A column for each answer): user1 answer1 answer2 answer3user2 answer1 answer2 answer3 How can this be done? How can all answers of a user appear on a single row Thanx,Danny.
View Replies !
Insert Data Into Multiple Rows From ASP.net
I am stuck. I have some vars being passed to an aspx page that I need to dump into a db table in multiple rows, how do I do it? I am going into a SQL database using VS.Net 2003 here's the format that the vars come in the page as: UserID = 46 k12SessionArray0interaction_id = Interaction_01 k12SessionArray0correct_response = d k12SessionArray0student_response = d k12SessionArray0result = C k12SessionArray0latency = 00:00:02 k12SessionArray1interaction_id = Interaction_02 k12SessionArray1correct_response = c k12SessionArray1student_response = c k12SessionArray1result = C k12SessionArray1latency = 00:00:02 k12SessionArray2interaction_id = Interaction_03 k12SessionArray2correct_response = a k12SessionArray2student_response = a k12SessionArray2result = C k12SessionArray2latency = 00:00:03 now here's the format of the database AnswerID | UserID | InteractionID | CorrectResponse | StudentResponse | QResult | Latency How do I insert the data to have it be mulitiple rows like: 1 | 46 | Interaction_01 | d | d | C | 00:00:02 2 | 46 | Interaction_02 | c | c | C | 00:00:02 3 | 46 | Interaction_03 | a | a | C | 00:00:03
View Replies !
Built In Limit Or Setting That Limits The Number Of Rows From An OLE DB Source Table In A Data Flow Task?
I have a table that I'm loading as part of a control flow that in turn is copied to a target table by using a data flow task. I am doing this because a different set of fields may be used from the source entry to create the target entry based on a field in the source table. That same field may indicate that multiple entries need to be created in the target table from one source table entry for which I use a multi-cast transformation. The problem I'm having is that no matter how many entries there are in the source table, the OLE DB Source during execution only shows 7,532 entries being taken from the source table. If there are less than 7,532 entries in the source table, everything processes fine. More than 7,532 and the data flow task only takes 7,532 and then seems to hang. It also seems as though only one path of the multi-cast transformation is taken when the conditional split directs a source entry down that path. Seems like a strange problem I know, but any insight anyone could provide is appreciated. Thanks.
View Replies !
Transform To Remove Rows From Data Set A That Match Rows In Data Set B On A Given Key?
Hi, I have a common requirement in numerous SSIS processes to take my main input data set and to remove all rows from it that match a second input data set on a given key and output this as the main output. I also want to output (as a second output) all the rows from the main input data set that did match on the given key. However, I don't want to merge in data from the second input, nor am I interested in rows from the second input data set that have no match in the main input. E.g. If I have the following data: Main input: Key Name --- ---- 1 Steve 2 Jamie 3 Donald Second Input Key DontCareAboutThisField1 --- ----------------------- 1 ... 3 ... 4 ... Then I would like the following output: Main Output Key Name --- ---- 2 Jamie Second Output Key Name --- ---- 1 Steve 3 Donald Can I do this with a standard transform, or will I have to write my own? Any help on this would be greatly appreciated! Thanks in advance, Lawrie
View Replies !
How To Insert More Number Of Rows Into Sql Server 2005 Database At Once.
Hi, Good morning to all.My table: User_Group_Map(UserID UNIQUEIDENTIFIER,GroupID UNIQUEIDENTIFIER) Now, I want to write one stored procedure that can insert rows into the above table, but more number of rows at-once. Means, the program should allow multiple insertions without the need to call the stored procedure from front-end more number of times. Can anyone please help me on this... Thanks in advance...Ashok kumar.
View Replies !
Howto: Insert Multiple Rows Of Data From A Gridview Into A Sql Database
I have a gridview with rows of info which does not go into edit mode. A user clicks a checkbox which picks that item and adds a quantity which does some calculations. What i need to do is when a user clicks on a button, it should scan through the gridview for all items checked and pick up the quantity values and a couple of other field values and insert the information into a sql database What would be the best way of doing this? I tried the following example using a stored proc, but could not locate the proper reference or namespace for Database db = DatabaseFactory.CreateDatabase(); StringBuilder sb = new StringBuilder(); sb.Append("<absorbentitems>"); // Gets the selected rows in the gridview foreach (GridViewRow dvr in gvAbsorbents.Rows) { CheckBox checkbox = (CheckBox)dvr.FindControl("tbQty"); // Check to see if the CheckBox is checked or not if (checkbox.Checked) { // Make the string here sb.Append("<item code=""); sb.Append(((CheckBox)dvr.FindControl("lblItemCode")).Text); sb.Append("">"); sb.Append("</item>"); sb.Append("<itemordered qty=""); sb.Append(((CheckBox)dvr.FindControl("tbQty")).Text); sb.Append("">"); sb.Append("</itemordered>"); } } sb.Append("</absorbentitems>"); Database db = DatabaseFactory.CreateDatabase(); DBCommandWrapper insertCommandWrapper = db.GetStoredProcCommandWrapper("usp_InsertManyRows"); insertCommandWrapper.AddInParameter("@XMLDOC", DbType.String, sb.ToString()); try { db.ExecuteNonQuery(insertCommandWrapper); //Label1.Text = "Data Inserted"; } catch (Exception ex) { //Label1.Text = ex.Message; } Any way of making the above example work or any other better way of inserting multiple rows of data from a gridview into an sql database would be super. thanks!
View Replies !
Create A Data Flow In SSIS Wich Updates Som Rows.
Hi, I have a table customer wich has the columns phone_number(char type) and ok_to_call(bit type). There are already data in the table and the column ok_to_call only contains the value false for every row. Now i want to update the latter column. I have a text file with a list of phone numbers and i want that all the rows in the Customer table(phone_number column)that matches the number in the text file to update ok_to_call to true. This is to be done in SSIS(Integration Services). I'm new at this and i've looked around that tool but is a lot of items, packages and stuff so i dont know where to begin. Would appreciate help on how to solve this issue in SSIS. What controlflow/Data flows to use,wich items and packages to use, how to configure and how to link together? Regards /Tomas
View Replies !
Return Two Rows From One Rows Data
I know this table is designed wrong for what I am doing but I hope Ican do it. I have a table like this.Prod_A_Jan, Prod_A_Feb, Prod_B_Jan, Prod_B_FebI want a query that returns data like this (two rows of data)"ProdA", Prod_A_Jan, Prod_A_Feb"ProdB", Prod_B_Jan, Prod_B_FebI know two queries can get it but I want one. Any Help would begreat!!!Sheila T.
View Replies !
VS2005 - Using Detailsview To Update, Insert And Delete Rows From SQL 2005 Database. Delete And Insert Work But Update Does Not - No Errors Returned
Using VS 2005 DetailsView to insert, delete, and update rows in SQL 2005 database. insert and delete work but update does not. I recieve no errors and the detailsView comes back unchanged (as well as table row is unchanged). I am trying to use as little code behind as possible. However I do have ItemUpdating routines that seem to work (i.e Checking table for new login duplicates and encrypting passwords). The following is the source code generated by VS2005:<%@ Page Language="VB" AutoEventWireup="false" CodeFile="frmDbRegionMgrNew.aspx.vb" Inherits="frmDbRegionMgrNew" Title="Region Manager DB Update" Theme="detailsVeiwTheme" %><%@ Import Namespace="System.Data" %><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="http://www.w3.org/1999/xhtml" ><head runat="server"><title>Untitled Page</title> </head><body><form id="form1" runat="server"><div><asp:Label ID="Label1" runat="server" Font-Bold="True" Font-Size="Large" ForeColor="#004000"Style="z-index: 101; left: 14px; position: absolute; top: 10px" Width="199px">Data Base Maintenance </asp:Label><asp:HyperLink ID="HyperLink1" runat="server" BackColor="ActiveBorder" BorderColor="ActiveBorder"BorderStyle="Outset" Font-Bold="True" Font-Size="X-Small" ForeColor="#004000"Height="31px" NavigateUrl="DataBaseMaint.aspx" Style="z-index: 133; left: 524px;position: absolute; top: 7px" Width="96px">DB Main Menu</asp:HyperLink><br /><br /><br /><table style="width: 654px"><tr><td style="width: 120px"><asp:Label ID="Label2" runat="server" Font-Bold="True" Font-Size="Large" ForeColor="#004000"Text="Regional Manager" Width="189px"></asp:Label></td><td style="width: 100px"></td><td style="width: 203px"></td></tr><tr><td style="width: 120px" valign="top"><asp:Label ID="Label3" runat="server" Font-Bold="True" Font-Size="Small" ForeColor="#004000"Style="z-index: 128; left: 2px; position: absolute; top: 115px" Width="128px">Select Greenhouse -></asp:Label></td><td style="width: 100px" valign="top"><asp:DropDownList ID="DropDownList1" runat="server" AutoPostBack="True" DataSourceID="SqlDataSource1"DataTextField="Name" DataValueField="GrnHseID"></asp:DropDownList><asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:MetrolinadataConnectionString %>"SelectCommand="SELECT [GrnHseID], [Name] FROM [Greenhouse]"></asp:SqlDataSource></td><td style="width: 203px"> <asp:DetailsView ID="DetailsView1" runat="server" AllowPaging="True" AutoGenerateRows="False"DataKeyNames="RegionMgrID" DataSourceID="SqlDataSource2" Height="50px" Width="125px"><Fields><asp:TemplateField HeaderText="RegionMgrID" InsertVisible="False" SortExpression="RegionMgrID"><EditItemTemplate><asp:Label ID="Label1" runat="server" Text='<%# Eval("RegionMgrID") %>'></asp:Label></EditItemTemplate><ItemTemplate><asp:Label ID="Label1" runat="server" Text='<%# Bind("RegionMgrID") %>'></asp:Label></ItemTemplate></asp:TemplateField><asp:TemplateField HeaderText="GrnHseID" SortExpression="GrnHseID"><EditItemTemplate><asp:Label ID="Label2" runat="server" Text='<%# Eval("GrnHseID") %>'></asp:Label></EditItemTemplate><InsertItemTemplate><asp:TextBox ID="TextBox1" runat="server" Text='<%# Bind("GrnHseID") %>'></asp:TextBox></InsertItemTemplate><ItemTemplate><asp:Label ID="Label2" runat="server" Text='<%# Bind("GrnHseID") %>'></asp:Label></ItemTemplate></asp:TemplateField><asp:BoundField DataField="DispLvl" HeaderText="DispLvl" SortExpression="DispLvl" /><asp:BoundField DataField="FName" HeaderText="FName" SortExpression="FName" /><asp:BoundField DataField="Minit" HeaderText="Minit" SortExpression="Minit" /><asp:BoundField DataField="LName" HeaderText="LName" SortExpression="LName" /><asp:BoundField DataField="Phone" HeaderText="Phone" SortExpression="Phone" /><asp:BoundField DataField="Ext" HeaderText="Ext" SortExpression="Ext" /><asp:BoundField DataField="Cell" HeaderText="Cell" SortExpression="Cell" /><asp:BoundField DataField="Email" HeaderText="Email" SortExpression="Email" /><asp:BoundField DataField="Login" HeaderText="Login" SortExpression="Login" /><asp:BoundField DataField="Password" HeaderText="Password" SortExpression="Password" /><asp:BoundField DataField="AccessLvl" HeaderText="AccessLvl" SortExpression="AccessLvl" /><asp:CommandField ShowDeleteButton="True" ShowEditButton="True" ShowInsertButton="True" /></Fields></asp:DetailsView><asp:SqlDataSource ID="SqlDataSource2" runat="server" ConflictDetection="CompareAllValues"ConnectionString="<%$ ConnectionStrings:MetrolinadataConnectionString %>" DeleteCommand="DELETE FROM [RegionMgr] WHERE [RegionMgrID] = @original_RegionMgrID AND [GrnHseID] = @original_GrnHseID AND [DispLvl] = @original_DispLvl AND [FName] = @original_FName AND [Minit] = @original_Minit AND [LName] = @original_LName AND [Phone] = @original_Phone AND [Ext] = @original_Ext AND [Cell] = @original_Cell AND = @original_Email AND [Login] = @original_Login AND [Password] = @original_Password AND [AccessLvl] = @original_AccessLvl"InsertCommand="INSERT INTO [RegionMgr] ([GrnHseID], [DispLvl], [FName], [Minit], [LName], [Phone], [Ext], [Cell], , [Login], [Password], [AccessLvl]) VALUES (@GrnHseID, @DispLvl, @FName, @Minit, @LName, @Phone, @Ext, @Cell, @Email, @Login, @Password, @AccessLvl)"OldValuesParameterFormatString="original_{0}" SelectCommand="SELECT * FROM [RegionMgr] WHERE ([GrnHseID] = @GrnHseID)"UpdateCommand="UPDATE [RegionMgr] SET [GrnHseID] = @GrnHseID, [DispLvl] = @DispLvl, [FName] = @FName, [Minit] = @Minit, [LName] = @LName, [Phone] = @Phone, [Ext] = @Ext, [Cell] = @Cell, = @Email, [Login] = @Login, [Password] = @Password, [AccessLvl] = @AccessLvl WHERE [RegionMgrID] = @original_RegionMgrID AND [GrnHseID] = @original_GrnHseID AND [DispLvl] = @original_DispLvl AND [FName] = @original_FName AND [Minit] = @original_Minit AND [LName] = @original_LName AND [Phone] = @original_Phone AND [Ext] = @original_Ext AND [Cell] = @original_Cell AND = @original_Email AND [Login] = @original_Login AND [Password] = @original_Password AND [AccessLvl] = @original_AccessLvl"><DeleteParameters><asp:Parameter Name="original_RegionMgrID" Type="Int32" /><asp:Parameter Name="original_GrnHseID" Type="Int32" /><asp:Parameter Name="original_DispLvl" Type="Int32" /><asp:Parameter Name="original_FName" Type="String" /><asp:Parameter Name="original_Minit" Type="String" /><asp:Parameter Name="original_LName" Type="String" /><asp:Parameter Name="original_Phone" Type="String" /><asp:Parameter Name="original_Ext" Type="String" /><asp:Parameter Name="original_Cell" Type="String" /><asp:Parameter Name="original_Email" Type="String" /><asp:Parameter Name="original_Login" Type="String" /><asp:Parameter Name="original_Password" Type="String" /><asp:Parameter Name="original_AccessLvl" Type="Int32" /></DeleteParameters><UpdateParameters><asp:Parameter Name="GrnHseID" Type="Int32" /><asp:Parameter Name="DispLvl" Type="Int32" /><asp:Parameter Name="FName" Type="String" /><asp:Parameter Name="Minit" Type="String" /><asp:Parameter Name="LName" Type="String" /><asp:Parameter Name="Phone" Type="String" /><asp:Parameter Name="Ext" Type="String" /><asp:Parameter Name="Cell" Type="String" /><asp:Parameter Name="Email" Type="String" /><asp:Parameter Name="Login" Type="String" /><asp:Parameter Name="Password" Type="String" /><asp:Parameter Name="AccessLvl" Type="Int32" /><asp:Parameter Name="original_RegionMgrID" Type="Int32" /><asp:Parameter Name="original_GrnHseID" Type="Int32" /><asp:Parameter Name="original_DispLvl" Type="Int32" /><asp:Parameter Name="original_FName" Type="String" /><asp:Parameter Name="original_Minit" Type="String" /><asp:Parameter Name="original_LName" Type="String" /><asp:Parameter Name="original_Phone" Type="String" /><asp:Parameter Name="original_Ext" Type="String" /><asp:Parameter Name="original_Cell" Type="String" /><asp:Parameter Name="original_Email" Type="String" /><asp:Parameter Name="original_Login" Type="String" /><asp:Parameter Name="original_Password" Type="String" /><asp:Parameter Name="original_AccessLvl" Type="Int32" /></UpdateParameters><SelectParameters><asp:ControlParameter ControlID="DropDownList1" Name="GrnHseID" PropertyName="SelectedValue"Type="Int32" /></SelectParameters><InsertParameters><asp:Parameter Name="GrnHseID" Type="Int32" /><asp:Parameter Name="DispLvl" Type="Int32" /><asp:Parameter Name="FName" Type="String" /><asp:Parameter Name="Minit" Type="String" /><asp:Parameter Name="LName" Type="String" /><asp:Parameter Name="Phone" Type="String" /><asp:Parameter Name="Ext" Type="String" /><asp:Parameter Name="Cell" Type="String" /><asp:Parameter Name="Email" Type="String" /><asp:Parameter Name="Login" Type="String" /><asp:Parameter Name="Password" Type="String" /><asp:Parameter Name="AccessLvl" Type="Int32" /></InsertParameters></asp:SqlDataSource> </td></tr><tr><td style="width: 120px"></td><td style="width: 100px"></td><td style="width: 203px"></td></tr></table></div></form></body></html>Appreciate any and all help!Dave
View Replies !
Using Idb2connection Source To Insert Data Into SQL 2005
Hi all,I have an issue to insert data into SQL2005 from an idb2connection.I explain:We need to retrieve data from an AS400 and insert it into a SQL database. Actually the idea is to use an idb2connection (which is supposed to be much faster than a DST or SSIS package; maybe I am wrong...)Connecting to the AS400 is not an issue at all. I can retrieve data into a data reader (I try to use a data adapter but there was some issue of character conversion).So basically I have the data reader with all the data I need and I want to insert this data into SQL. My problem is that I would like to know which method is the best to do the insert: 1- Read each line of the data reader and create an insert statement that I can send to my SQL Stored procedure to perform the insert 2- Read each line of the data reader and concatenate it into an xml format in order to pass the Xml string to the stored procedure and perform the insert 3-?? Using solution 1, in case of huge amount of data it will call the stored procedure for each row and may crash the SQL server (cause of having multi call to SQL server)?Using solution 2 I have issue when I have more than 2000 lines. So please can someone tell me which method should be the more appropriate to perform this transfer of data from AS400 to SQL considering that I may have a large amount of data. All your ideas are welcome!!!! Many thanks,
View Replies !
SSIS - DataFlowTask - Excel Source - Dynamic Excel Template
Hi, I am creating an SSIS package witha a Dataflow task, which reads from an Excel source and then uses script component to dumpt the data to multiple tables in Sql Server database I need to some how make my Excel source dynamic, that is my excel template which i would be using to map the excel columns to script component's input columns would be dynamic.. In other words, I should be able to define the Excel Source, Column Mapping Information, Precedence constraint to the Script component dynamically Please suggest how could i accomplish this Regards, Kalyan
View Replies !
File Source Error : So Much Rows
Hello, I have a problem with my SSIS. I have a data flow with a file source in csv, but itself has 140 000 rows, so when I execute the date flow, I have a error who say that the data exceed the temp of I/O (sorry for the translate, but I have the message in french). I test to pass the DefaultBufferMaxRow to 140000 but I have always the problem. If we can help me, thank you.
View Replies !
Param For MySQL Data Source In SSIS 2005
Hi experts, I 'm trying to get countNumber from a select statement in MySQL source. Something likes this: select @countNumber = count(*) from tableName where condition_1 = xxx I use ExecuteSQLTask to get the result set with result name @countNumber along with ADO.NET connection type. I 've installed mysql-connector-net-5.0.5 cause the source is MySQL 5x. And I got a task failed error which is described below: [Execute SQL Task] Error: An error occurred while assigning a value to variable "new_process": "Result binding by name "@new_process" is not supported for this connection type. ". Please help me to fix this error, thanks alot Best reguards,
View Replies !
Counting Rows From Flat File Source
Hello, Is there a way (perhaps a property) to capture the number of rows selected from a Flat File Data Flow Source without having to develop a script to loop through the rows and count them? Thanks a lot, Grace
View Replies !
DFT OLEDB Source Returning Empty Rows
I have had at least 2 occurences of a DFT OLEDB source returning the correct number of rows but all rows are empty (they contain zeros or ''). This has happened in two different places in different SSIS packages within an ETL task. In one case the source was on a different server running SQLServer and in the other it was a different database on the same server as the SSIS package. This occured running on different servers, one with SQL 2005 SP2 and the other without. Both are 64 bit AMD systems running 64 bit SQL 2005. As there is a derived column transformation that has performed the derivation on the blank columns I assume the problem is with the OLEDB source but it could be with the data stream from the OLEDB source to to whatever follows. Has anyone else had this problem and does anyone know of a fix?
View Replies !
Fetch Only Inserted And Updated Rows From Source
Hi, I am trying to create a SSIS package, which will extract data from a SQL server view and populate the data in our local SQL server database tables. My objective is to get the data from the view such that only inserted and updated rows are fetched from the view. Note: the view does not expose any updated date type of column thru which I can check. So I guess I have to compare each and every field with my destination table row's fields. I would appreciate any suggestions on how to approach the problem. Thanks in advance.
View Replies !
Insert Rows With SQLServerce V3.5 Is Very Slow Can Anyone Help Insert Performance Poor
Hi All I decided to change over from Microsoft Access Database file to the New SQLServerCe Compact edition. Although the reading of data from the database is greatly improved, the inserting of the new rows is extremely slow. I was getting between 60 to 70 rows per sec using OLEDB and an Access Database but now only getting 14 to 27 rows per sec using SQLServerCe. I have tried the below code changes and nothing seams to increase the speed, any help as I would prefer to use SQLServerCe as the database is much smaller and I€™m use to SQL Commands. Details: VB2008 Pro .NET Frameworks 2.0 SQL Compact Edition V3.5 Encryption = Engine Default Database Size = 128Mb (But needs to be changes to 999Mbs) Where Backup_On_Next_Run, OverWriteQuick, CompressAns are Booleans, all other column sizes are nvarchar and size 10 to 30 expect for Full Folder Address size 260 TRY1 Direct Insert Using Data Adapter. Me.BackupDatabaseTableAdapter1.Insert(Group_Name1, Full_Folder_Address1, File1, File_Size_KB1, Schedule_To_Run1, Backup_Time1, Last_Run1, Result1, Last_Modfied1, Last_Modfied1, Backup_On_Next_Run1, Total_Backup_Times1, Server_File_Number1, Server_Number1, File_Break_Down1, No_Of_Servers1, Full_File_Address1, OverWriteQuick, CompressAns) 14 to 20 rows per second (Was 60 to 70 when using OLEDB Access) TRY 2 Using Record Sets Private Sub InsertRecordsIntoSQLServerce(ByVal Group_Name1 As String, ByVal Full_Folder_Address1 As String, ByVal File1 As String, ByVal File_Size_KB1 As String, ByVal Schedule_To_Run1 As String, ByVal Backup_Time1 As String, ByVal Last_Run1 As String, ByVal Result1 As String, ByVal Last_Modfied1 As String, ByVal Latest_Modfied1 As String, ByVal Backup_On_Next_Run1 As Boolean, ByVal Total_Backup_Times1 As String, ByVal Server_File_Number1 As String, ByVal Server_Number1 As String, ByVal File_Break_Down1 As String, ByVal No_Of_Servers1 As String, ByVal Full_File_Address1 As String, ByVal OverWriteQuick As Boolean, ByVal CompressAns As Boolean) Dim conn As SqlCeConnection = Nothing Dim CommandText1 As String = "INSERT INTO BackupDatabase (Group_Name, Full_Full_Folder_Adress, File1,File_Size_KB, Schedule_To_Run, Backup_Time, Last_Run, Result, Last_Modfied, Latest_Modfied, Backup_On_Next_Run, Total_Backup_Times, Server_File_Number, Server_Number, File_Break_Down, No_Of_Servers, Full_File_Address, OverWrite, Compressed) VALUES ('" & Group_Name1 & "', '" & Full_Folder_Address1 & "', '" & File1 & "', '" & File_Size_KB1 & "', '" & Schedule_To_Run1 & "', '" & Backup_Time1 & "', '" & Last_Run1 & "', '" & Result1 & "', '" & Last_Modfied1 & "', '" & Latest_Modfied1 & "', '" & CStr(Backup_On_Next_Run1) & "', '" & Total_Backup_Times1 & "', '" & Server_File_Number1 & "', '" & Server_Number1 & "', '" & File_Break_Down1 & "', '" & No_Of_Servers1 & "', '" & Full_File_Address1 & "', '" & CStr(OverWriteQuick) & "', '" & CStr(CompressAns) & "')" Try conn = New SqlCeConnection(strConn) conn.Open() Dim cmd As SqlCeCommand = conn.CreateCommand() cmd.CommandText = "SELECT * FROM BackupDatabase" cmd.ExecuteNonQuery() Dim rs As SqlCeResultSet = cmd.ExecuteResultSet(ResultSetOptions.Updatable Or ResultSetOptions.Scrollable) Dim rec As SqlCeUpdatableRecord = rs.CreateRecord() rec.SetString(1, Group_Name1) rec.SetString(2, Full_Folder_Address1) rec.SetString(3, File1) rec.SetSqlString(4, File_Size_KB1) rec.SetSqlString(5, Schedule_To_Run1) rec.SetSqlString(6, Backup_Time1) rec.SetSqlString(7, Last_Run1) rec.SetSqlString(8, Result1) rec.SetSqlString(9, Last_Modfied1) rec.SetSqlString(10, Latest_Modfied1) rec.SetSqlBoolean(11, Backup_On_Next_Run1) rec.SetSqlString(12, Total_Backup_Times1) rec.SetSqlString(13, Server_File_Number1) rec.SetSqlString(14, Server_Number1) rec.SetSqlString(15, File_Break_Down1) rec.SetSqlString(16, No_Of_Servers1) rec.SetSqlString(17, Full_File_Address1) rec.SetSqlBoolean(18, OverWriteQuick) rec.SetSqlBoolean(19, CompressAns) rs.Insert(rec) Catch e As Exception MessageBox.Show(e.Message) Finally conn.Close() End Try End Sub €™20 to 24 rows per sec TRY 3 Using SQL Commands Direct Private Sub InsertRecordsIntoSQLServerce(ByVal Group_Name1 As String, ByVal Full_Folder_Address1 As String, ByVal File1 As String, ByVal File_Size_KB1 As String, ByVal Schedule_To_Run1 As String, ByVal Backup_Time1 As String, ByVal Last_Run1 As String, ByVal Result1 As String, ByVal Last_Modfied1 As String, ByVal Latest_Modfied1 As String, ByVal Backup_On_Next_Run1 As Boolean, ByVal Total_Backup_Times1 As String, ByVal Server_File_Number1 As String, ByVal Server_Number1 As String, ByVal File_Break_Down1 As String, ByVal No_Of_Servers1 As String, ByVal Full_File_Address1 As String, ByVal OverWriteQuick As Boolean, ByVal CompressAns As Boolean) Dim conn As SqlCeConnection = Nothing Dim CommandText1 As String = "INSERT INTO BackupDatabase (Group_Name, Full_Full_Folder_Adress, File1,File_Size_KB, Schedule_To_Run, Backup_Time, Last_Run, Result, Last_Modfied, Latest_Modfied, Backup_On_Next_Run, Total_Backup_Times, Server_File_Number, Server_Number, File_Break_Down, No_Of_Servers, Full_File_Address, OverWrite, Compressed) VALUES ('" & Group_Name1 & "', '" & Full_Folder_Address1 & "', '" & File1 & "', '" & File_Size_KB1 & "', '" & Schedule_To_Run1 & "', '" & Backup_Time1 & "', '" & Last_Run1 & "', '" & Result1 & "', '" & Last_Modfied1 & "', '" & Latest_Modfied1 & "', '" & CStr(Backup_On_Next_Run1) & "', '" & Total_Backup_Times1 & "', '" & Server_File_Number1 & "', '" & Server_Number1 & "', '" & File_Break_Down1 & "', '" & No_Of_Servers1 & "', '" & Full_File_Address1 & "', '" & CStr(OverWriteQuick) & "', '" & CStr(CompressAns) & "')" Try conn = New SqlCeConnection(strConn) conn.Open() Dim cmd As SqlCeCommand = conn.CreateCommand() cmd.CommandText = CommandText1 'cmd.CommandText = "INSERT INTO BackupDatabase (€¦" cmd.ExecuteNonQuery() Catch e As Exception MessageBox.Show(e.Message) Finally conn.Close() End Try End Sub €˜ 25 to 30 but mostly holds around 27 rows per sec I Is this the best you can get or is there a better way. Any help would be greatly appericated Kind Regards John Galvin
View Replies !
Certain Rows To Excel Files
Hello, I have a table T1 with ID and Desc fields. I want to export this table to excel files based on the ID field. So my stored procedure select all the same T1.ID and export it to ID.xls files. How can I do this?
View Replies !
Skip Rows In Excel
Hi, How to skip my 12 header rows from XLS input source? (before the Excel driver reads (by default, 8 rows) in the specified source to guess at the data type of each column.) thx, f.sor
View Replies !
Certain Rows To Excel Files
Hello, I have a table T1 with ID and Desc fields. I want to export this table to excel files based on the ID field. So my stored procedure select all the same T1.ID and export it to ID.xls files. How can I do this?
View Replies !
DELETE Rows In Excel
How to delete rows in an excel worksheet? I have the following code in the exeutesqltask but i keep getting a syntx error. 'DELETE FROM 4DialMeters' Remeber that this is an Excel source and I need to find out what the correct syntax is for the DELETE Statement in Excel.
View Replies !
Null Rows In Excel
Hi, I have to import data from Excel to SQL Server using SSIS. My fields in sql don't take null values however for some reason i don't understand I see that the SSIS is also trying to import null rows into the database. For example I have the following excel file: Name Postcode State XXX 123 ON YXX 345 IO The rows following the last line are all blank but when I preview the Excel Source data flow task it returns the empty rows as null and therfore, my package fails as db fields don't accept null values. How can I prevent SSIS from taking null rows? Can I maybe write a query in SSIS to say only to take rows where postcode<>null ? Thanks in advance for any help i get :-) <?xml version="1.0"?><DTS:Executable xmlns:DTS="www.microsoft.com/SqlServer/Dts" DTS:ExecutableType="MSDTS.Package.1"><DTS:Property DTS:Name="PackageFormatVersion">2</DTS:Property><DTS:Property DTS:Name="VersionComments"></DTS:Property><DTS:Property DTS:Name="CreatorName">BUSINESS-SOLUTIavital</DTS:Property><DTS:Property DTS:Name="CreatorComputerName">NADINLEP</DTS:Property><DTS:Property DTS:Name="CreationDate" DTS:DataType="7">9/20/2007 3:16:03 PM</DTS:Property><DTS:Property DTS:Name="PackageType">5</DTS:Property><DTS:Property DTS:Name="ProtectionLevel">1</DTS:Property><DTS:Property DTS:Name="MaxConcurrentExecutables">-1</DTS:Property><DTS:Property DTS:Name="PackagePriorityClass">0</DTS:Property><DTS:Property DTS:Name="VersionMajor">1</DTS:Property><DTS:Property DTS:Name="VersionMinor">0</DTS:Property><DTS:Property DTS:Name="VersionBuild">10</DTS:Property><DTS:Property DTS:Name="VersionGUID">{C9421EB6-00F3-4CB6-9D51-10C744818FE8}</DTS:Property><DTS:Property DTS:Name="EnableConfig">0</DTS:Property><DTS:Property DTS:Name="CheckpointFileName"></DTS:Property><DTS:Property DTS:Name="SaveCheckpoints">0</DTS:Property><DTS:Property DTS:Name="CheckpointUsage">0</DTS:Property><DTS:Property DTS:Name="SuppressConfigurationWarnings">0</DTS:Property> <DTS:ConnectionManager><DTS:Property DTS:Name="DelayValidation">0</DTS:Property><DTS:Property DTS:Name="ObjectName">BS-SERVER1BS.AHT_DW</DTS:Property><DTS:Property DTS:Name="DTSID">{E5A37824-5AE6-4EFF-9714-8D2B16C31C78}</DTS:Property><DTS:Property DTS:Name="Description"></DTS:Property><DTS:Property DTS:Name="CreationName">OLEDB</DTS:Property><DTS:ObjectData><DTS:ConnectionManager><DTS:Property DTS:Name="Retain">0</DTS:Property><DTS:Property DTS:Name="ConnectionString">Data Source=NADINLEP;Initial Catalog=AHT_DW;Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;</DTS:Property></DTS:ConnectionManager></DTS:ObjectData></DTS:ConnectionManager> <DTS:ConnectionManager><DTS:Property DTS:Name="DelayValidation">0</DTS:Property><DTS:Property DTS:Name="ObjectName">Excel Connection Manager</DTS:Property><DTS:Property DTS:Name="DTSID">{127C18FB-4D7B-4A91-8D1E-8D1F0ABB2B3F}</DTS:Property><DTS:Property DTS:Name="Description"></DTS:Property><DTS:Property DTS:Name="CreationName">EXCEL</DTS:Property><DTS:ObjectData><DTS:ConnectionManager><DTS:Property DTS:Name="Retain">0</DTS:Property><DTS:Property DTS:Name="ConnectionString">Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:Documents and SettingsavitalMy DocumentsAHTAccount Codes.xls;Extended Properties="EXCEL 8.0;HDR=YES";</DTS:Property></DTS:ConnectionManager></DTS:ObjectData></DTS:ConnectionManager> <DTS:PackageVariable><DTS:Property DTS:Name="PackageVariableValue" DTS:DataType="8"><Package xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:dwd="http://schemas.microsoft.com/DataWarehouse/Designer/1.0"><dwd:DtsControlFlowDiagram><dwd:BoundingTop>1000</dwd:BoundingTop><dwd:Layout><dds> <diagram fontclsid="{0BE35203-8F91-11CE-9DE3-00AA004BB851}" mouseiconclsid="{0BE35204-8F91-11CE-9DE3-00AA004BB851}" defaultlayout="Microsoft.DataWarehouse.Layout.GraphLayout" defaultlineroute="Microsoft.DataWarehouse.Layout.GraphLayout" version="7" nextobject="5" scale="100" pagebreakanchorx="0" pagebreakanchory="0" pagebreaksizex="0" pagebreaksizey="0" scrollleft="0" scrolltop="0" gridx="150" gridy="150" marginx="1000" marginy="1000" zoom="100" x="26405" y="7832" backcolor="15334399" defaultpersistence="2" PrintPageNumbersMode="3" PrintMarginTop="0" PrintMarginBottom="635" PrintMarginLeft="0" PrintMarginRight="0" marqueeselectionmode="1" mousepointer="0" snaptogrid="0" autotypeannotation="1" showscrollbars="0" viewpagebreaks="0" donotforceconnectorsbehindshapes="1" backpictureclsid="{00000000-0000-0000-0000-000000000000}"> <font> <ddsxmlobjectstreamwrapper binary="01010000900180380100065461686f6d61" /> </font> <mouseicon> <ddsxmlobjectstreamwrapper binary="6c74000000000000" /> </mouseicon> </diagram> <layoutmanager> <ddsxmlobj /> </layoutmanager> <ddscontrol controlprogid="DdsShapes.DdsObjectManagedBridge.1" tooltip="Data Flow Task" left="0" top="1000" logicalid="2" controlid="1" masterid="0" hint1="0" hint2="0" width="3598" height="1164" noresize="0" nomove="0" nodefaultattachpoints="0" autodrag="1" usedefaultiddshape="1" selectable="1" showselectionhandles="1" allownudging="1" isannotation="0" dontautolayout="0" groupcollapsed="0" tabstop="1" visible="1" snaptogrid="0"> <control> <ddsxmlobjectstreaminitwrapper binary="000800000e0e00008c040000" /> </control> <layoutobject> <ddsxmlobj> <property name="LogicalObject" value="{8A45A222-5E60-4F75-93A7-7BCE950E56DE}" vartype="8" /> <property name="ShowConnectorSource" value="0" vartype="2" /> </ddsxmlobj> </layoutobject> <shape groupshapeid="0" groupnode="0" /> </ddscontrol> </dds></dwd:Layout></dwd:DtsControlFlowDiagram></Package></DTS:Property><DTS:Property DTS:Name="Namespace">dts-designer-1.0</DTS:Property><DTS:Property DTS:Name="ObjectName">{8707563F-57F7-4679-BFC4-6EC66F6A5BD3}</DTS:Property><DTS:Property DTS:Name="DTSID">{5DE9985A-8AEC-4571-8CBD-AE6A21F557ED}</DTS:Property><DTS:Property DTS:Name="Description"></DTS:Property><DTS:Property DTS:Name="CreationName"></DTS:Property></DTS:PackageVariable> <DTS:PackageVariable><DTS:Property DTS:Name="PackageVariableValue" DTS:DataType="8"><TaskHost xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:dwd="http://schemas.microsoft.com/DataWarehouse/Designer/1.0"><dwd:DtsDataFlowDiagram><dwd:BoundingTop>2175</dwd:BoundingTop><dwd:Layout><dds> <diagram fontclsid="{0BE35203-8F91-11CE-9DE3-00AA004BB851}" mouseiconclsid="{0BE35204-8F91-11CE-9DE3-00AA004BB851}" defaultlayout="Microsoft.DataWarehouse.Layout.GraphLayout" defaultlineroute="Microsoft.DataWarehouse.Layout.GraphLayout" version="7" nextobject="13" scale="100" pagebreakanchorx="0" pagebreakanchory="0" pagebreaksizex="0" pagebreaksizey="0" scrollleft="0" scrolltop="1302" gridx="150" gridy="150" marginx="1000" marginy="1000" zoom="100" x="17568" y="11456" backcolor="15334399" defaultpersistence="2" PrintPageNumbersMode="3" PrintMarginTop="0" PrintMarginBottom="635" PrintMarginLeft="0" PrintMarginRight="0" marqueeselectionmode="1" mousepointer="0" snaptogrid="0" autotypeannotation="1" showscrollbars="0" viewpagebreaks="0" donotforceconnectorsbehindshapes="0" backpictureclsid="{00000000-0000-0000-0000-000000000000}"> <font> <ddsxmlobjectstreamwrapper binary="01000000900144420100065461686f6d61" /> </font> <mouseicon> <ddsxmlobjectstreamwrapper binary="6c74000000000000" /> </mouseicon> </diagram> <layoutmanager> <ddsxmlobj /> </layoutmanager> <ddscontrol controlprogid="DdsShapes.DdsObjectManagedBridge.1" tooltip="Excel Source" left="0" top="2175" logicalid="4" controlid="1" masterid="0" hint1="0" hint2="0" width="3598" height="1164" noresize="0" nomove="0" nodefaultattachpoints="0" autodrag="1" usedefaultiddshape="1" selectable="1" showselectionhandles="1" allownudging="1" isannotation="0" dontautolayout="0" groupcollapsed="0" tabstop="1" visible="1" snaptogrid="0"> <control> <ddsxmlobjectstreaminitwrapper binary="000800000e0e00008c040000" /> </control> <layoutobject> <ddsxmlobj> <property name="LogicalObject" value="{8A45A222-5E60-4F75-93A7-7BCE950E56DE}/components/366" vartype="8" /> <property name="ShowConnectorSource" value="0" vartype="2" /> </ddsxmlobj> </layoutobject> <shape groupshapeid="0" groupnode="0" /> </ddscontrol> <ddscontrol controlprogid="DdsShapes.DdsObjectManagedBridge.1" tooltip="OLE DB Destination" left="26" top="4715" logicalid="5" controlid="2" masterid="0" hint1="0" hint2="0" width="3598" height="1164" noresize="0" nomove="0" nodefaultattachpoints="0" autodrag="1" usedefaultiddshape="1" selectable="1" showselectionhandles="1" allownudging="1" isannotation="0" dontautolayout="0" groupcollapsed="0" tabstop="1" visible="1" snaptogrid="0"> <control> <ddsxmlobjectstreaminitwrapper binary="000800000e0e00008c040000" /> </control> <layoutobject> <ddsxmlobj> <property name="LogicalObject" value="{8A45A222-5E60-4F75-93A7-7BCE950E56DE}/components/413" vartype="8" /> <property name="ShowConnectorSource" value="0" vartype="2" /> </ddsxmlobj> </layoutobject> <shape groupshapeid="0" groupnode="0" /> </ddscontrol> <ddscontrol controlprogid="MSDDS.Polyline" left="1400" top="2940" logicalid="6" controlid="3" masterid="0" hint1="0" hint2="0" width="825" height="2275" noresize="0" nomove="0" nodefaultattachpoints="1" autodrag="0" usedefaultiddshape="0" selectable="1" showselectionhandles="0" allownudging="1" isannotation="0" dontautolayout="0" groupcollapsed="0" tabstop="1" visible="1" snaptogrid="0"> <control> <ddsxmlobj> <polyline endtypedst="3" endtypesrc="1" usercolor="32768" linestyle="0" linerender="1" customendtypedstid="0" customendtypesrcid="0" adornsvisible="1" /> </ddsxmlobj> </control> <layoutobject> <ddsxmlobj> <property name="LogicalObject" value="{8A45A222-5E60-4F75-93A7-7BCE950E56DE}/paths/430" vartype="8" /> <property name="Virtual" value="0" vartype="11" /> <property name="VisibleAP" value="0" vartype="3" /> </ddsxmlobj> </layoutobject> <connector lineroutestyle="Microsoft.DataWarehouse.Layout.GraphLayout" sourceid="1" destid="2" sourceattachpoint="7" destattachpoint="6" segmenteditmode="0" bendpointeditmode="0" bendpointvisibility="2" relatedid="0" virtual="0"> <point x="1799" y="3339" /> <point x="1799" y="4027" /> <point x="1825" y="4027" /> <point x="1825" y="4715" /> </connector> </ddscontrol> </dds></dwd:Layout><dwd:PersistedViewPortTop>1302</dwd:PersistedViewPortTop></dwd:DtsDataFlowDiagram><dwd:DtsComponentDesignerPropertiesList><dwd:DtsComponentDesignTimeProperty><dwd:key xsi:type="xsd:string">366TableInfoObjectType</dwd:key><dwd:value xsi:type="xsd:string">Table</dwd:value></dwd:DtsComponentDesignTimeProperty><dwd:DtsComponentDesignTimeProperty><dwd:key xsi:type="xsd:string">413TableInfoObjectType</dwd:key><dwd:value xsi:type="xsd:string">Table</dwd:value></dwd:DtsComponentDesignTimeProperty><dwd:DtsComponentDesignTimeProperty><dwd:key xsi:type="xsd:string">32TableInfoObjectType</dwd:key><dwd:value xsi:type="xsd:string">Table</dwd:value></dwd:DtsComponentDesignTimeProperty><dwd:DtsComponentDesignTimeProperty><dwd:key xsi:type="xsd:string">9DataSourceViewID</dwd:key></dwd:DtsComponentDesignTimeProperty><dwd:DtsComponentDesignTimeProperty><dwd:key xsi:type="xsd:string">32DataSourceViewID</dwd:key></dwd:DtsComponentDesignTimeProperty><dwd:DtsComponentDesignTimeProperty><dwd:key xsi:type="xsd:string">9TableInfoObjectType</dwd:key><dwd:value xsi:type="xsd:string">Table</dwd:value></dwd:DtsComponentDesignTimeProperty><dwd:DtsComponentDesignTimeProperty><dwd:key xsi:type="xsd:string">366DataSourceViewID</dwd:key></dwd:DtsComponentDesignTimeProperty><dwd:DtsComponentDesignTimeProperty><dwd:key xsi:type="xsd:string">413DataSourceViewID</dwd:key></dwd:DtsComponentDesignTimeProperty><dwd:DtsComponentDesignTimeProperty><dwd:key xsi:type="xsd:string">103DataSourceViewID</dwd:key></dwd:DtsComponentDesignTimeProperty><dwd:DtsComponentDesignTimeProperty><dwd:key xsi:type="xsd:string">103TableInfoObjectType</dwd:key><dwd:value xsi:type="xsd:string">Table</dwd:value></dwd:DtsComponentDesignTimeProperty></dwd:DtsComponentDesignerPropertiesList></TaskHost></DTS:Property><DTS:Property DTS:Name="Namespace">dts-designer-1.0</DTS:Property><DTS:Property DTS:Name="ObjectName">{8A45A222-5E60-4F75-93A7-7BCE950E56DE}</DTS:Property><DTS:Property DTS:Name="DTSID">{AD0D1824-9E01-4A79-8938-352FF3AC648F}</DTS:Property><DTS:Property DTS:Name="Description"></DTS:Property><DTS:Property DTS:Name="CreationName"></DTS:Property></DTS:PackageVariable> <DTS:PackageVariable><DTS:Property DTS:Name="PackageVariableValue" DTS:DataType="8"><PipelinePath xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:dwd="http://schemas.microsoft.com/DataWarehouse/Designer/1.0"><dwd:PathAnnotation>AsNeeded</dwd:PathAnnotation><dwd:DestinationName>OLE DB Destination Input</dwd:DestinationName><dwd:SourceName>Excel Source Output</dwd:SourceName></PipelinePath></DTS:Property><DTS:Property DTS:Name="Namespace">dts-designer-1.0</DTS:Property><DTS:Property DTS:Name="ObjectName">{8A45A222-5E60-4F75-93A7-7BCE950E56DE}-430</DTS:Property><DTS:Property DTS:Name="DTSID">{8F8C297C-23B0-4AD0-9E76-7D23440CA867}</DTS:Property><DTS:Property DTS:Name="Description"></DTS:Property><DTS:Property DTS:Name="CreationName"></DTS:Property></DTS:PackageVariable><DTS:Property DTS:Name="ForceExecValue">0</DTS:Property><DTS:Property DTS:Name="ExecValue" DTS:DataType="3">0</DTS:Property><DTS:Property DTS:Name="ForceExecutionResult">-1</DTS:Property><DTS:Property DTS:Name="Disabled">0</DTS:Property><DTS:Property DTS:Name="FailPackageOnFailure">0</DTS:Property><DTS:Property DTS:Name="FailParentOnFailure">0</DTS:Property><DTS:Property DTS:Name="MaxErrorCount">1</DTS:Property><DTS:Property DTS:Name="ISOLevel">1048576</DTS:Property><DTS:Property DTS:Name="LocaleID">1033</DTS:Property><DTS:Property DTS:Name="TransactionOption">1</DTS:Property><DTS:Property DTS:Name="DelayValidation">0</DTS:Property> <DTS:LoggingOptions><DTS:Property DTS:Name="LoggingMode">0</DTS:Property><DTS:Property DTS:Name="FilterKind">1</DTS:Property><DTS:Property DTS:Name="EventFilter" DTS:DataType="8"></DTS:Property></DTS:LoggingOptions> <DTS:Executable DTS:ExecutableType="DTS.Pipeline.1"><DTS:Property DTS:Name="ExecutionLocation">0</DTS:Property><DTS:Property DTS:Name="ExecutionAddress"></DTS:Property><DTS:Property DTS:Name="TaskContact">Performs high-performance data extraction, transformation and loading;Microsoft Corporation; Microsoft SQL Server v9; (C) 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1</DTS:Property><DTS:Property DTS:Name="ForceExecValue">0</DTS:Property><DTS:Property DTS:Name="ExecValue" DTS:DataType="3">0</DTS:Property><DTS:Property DTS:Name="ForceExecutionResult">-1</DTS:Property><DTS:Property DTS:Name="Disabled">0</DTS:Property><DTS:Property DTS:Name="FailPackageOnFailure">0</DTS:Property><DTS:Property DTS:Name="FailParentOnFailure">0</DTS:Property><DTS:Property DTS:Name="MaxErrorCount">1</DTS:Property><DTS:Property DTS:Name="ISOLevel">1048576</DTS:Property><DTS:Property DTS:Name="LocaleID">-1</DTS:Property><DTS:Property DTS:Name="TransactionOption">1</DTS:Property><DTS:Property DTS:Name="DelayValidation">0</DTS:Property> <DTS:LoggingOptions><DTS:Property DTS:Name="LoggingMode">0</DTS:Property><DTS:Property DTS:Name="FilterKind">1</DTS:Property><DTS:Property DTS:Name="EventFilter" DTS:DataType="8"></DTS:Property></DTS:LoggingOptions><DTS:Property DTS:Name="ObjectName">Import AccountsDim sheet</DTS:Property><DTS:Property DTS:Name="DTSID">{8A45A222-5E60-4F75-93A7-7BCE950E56DE}</DTS:Property><DTS:Property DTS:Name="Description">Data Flow Task</DTS:Property><DTS:Property DTS:Name="CreationName">DTS.Pipeline.1</DTS:Property><DTS:Property DTS:Name="DisableEventHandlers">0</DTS:Property><DTS:ObjectData><pipeline id="0" name="pipelineXml" description="pipelineXml" defaultBufferMaxRows="10000" engineThreads="5" defaultBufferSize="10485760" BLOBTempStoragePath="" bufferTempStoragePath="" runInOptimizedMode="true"> <components> <component id="366" name="Excel Source" componentClassID="{B551FCA8-23BD-4719-896F-D8F352A5283C}" description="Excel Source" localeId="-1" usesDispositions="true" validateExternalMetadata="True" version="1" pipelineVersion="0" contactInfo="Excel Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;1"> <properties> <property id="367" name="CommandTimeout" dataType="System.Int32" state="default" isArray="false" description="The number of seconds before a command times out. A value of 0 indicates an infinite time-out." typeConverter="" UITypeEditor="" containsID="false" expressionType="None">0</property> <property id="368" name="OpenRowset" dataType="System.String" state="default" isArray="false" description="Specifies the name of the database object used to open a rowset." typeConverter="" UITypeEditor="" containsID="false" expressionType="None">Sheet1$</property> <property id="369" name="OpenRowsetVariable" dataType="System.String" state="default" isArray="false" description="Specifies the variable that contains the name of the database object used to open a rowset." typeConverter="" UITypeEditor="" containsID="false" expressionType="None"></property> <property id="370" name="SqlCommand" dataType="System.String" state="default" isArray="false" description="The SQL command to be executed." typeConverter="" UITypeEditor="Microsoft.DataTransformationServices.Controls.ModalMultilineStringEditor, Microsoft.DataTransformationServices.Controls, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" containsID="false" expressionType="None"></property> <property id="371" name="SqlCommandVariable" dataType="System.String" state="default" isArray="false" description="The variable that contains the SQL command to be executed." typeConverter="" UITypeEditor="" containsID="false" expressionType="None"></property> <property id="372" name="AccessMode" dataType="System.Int32" state="default" isArray="false" description="Specifies the mode used to access the database." typeConverter="AccessMode" UITypeEditor="" containsID="false" expressionType="None">0</property> <property id="378" name="ParameterMapping" dataType="System.String" state="default" isArray="false" description="The mapping from parameters in the SQL command to variables." typeConverter="" UITypeEditor="" containsID="false" expressionType="None"></property></properties> <connections> <connection id="373" name="OleDbConnection" description="The OLE DB runtime connection used to access the database." connectionManagerID="{127C18FB-4D7B-4A91-8D1E-8D1F0ABB2B3F}"/></connections> <outputs> <output id="374" name="Excel Source Output" description="" exclusionGroup="0" synchronousInputId="0" deleteOutputOnPathDetached="false" hasSideEffects="false" dangling="false" isErrorOut="false" isSorted="false" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed"><outputColumns> <outputColumn id="396" name="îôúç çùáåï" description="" lineageId="396" precision="0" scale="0" length="255" dataType="wstr" codePage="0" sortKeyPosition="0" comparisonFlags="0" specialFlags="0" errorOrTruncationOperation="Conversion" errorRowDisposition="FailComponent" truncationRowDisposition="FailComponent" externalMetadataColumnId="395"/> <outputColumn id="399" name="ùà äçùáåï" description="" lineageId="399" precision="0" scale="0" length="255" dataType="wstr" codePage="0" sortKeyPosition="0" comparisonFlags="0" specialFlags="0" errorOrTruncationOperation="Conversion" errorRowDisposition="FailComponent" truncationRowDisposition="FailComponent" externalMetadataColumnId="398"/> <outputColumn id="405" name="F5" description="" lineageId="405" precision="0" scale="0" length="255" dataType="wstr" codePage="0" sortKeyPosition="0" comparisonFlags="0" specialFlags="0" errorOrTruncationOperation="Conversion" errorRowDisposition="FailComponent" truncationRowDisposition="FailComponent" externalMetadataColumnId="404"/> <outputColumn id="408" name="A#T" description="" lineageId="408" precision="0" scale="0" length="255" dataType="wstr" codePage="0" sortKeyPosition="0" comparisonFlags="0" specialFlags="0" errorOrTruncationOperation="Conversion" errorRowDisposition="FailComponent" truncationRowDisposition="FailComponent" externalMetadataColumnId="407"/> <outputColumn id="411" name="A#C" description="" lineageId="411" precision="0" scale="0" length="255" dataType="wstr" codePage="0" sortKeyPosition="0" comparisonFlags="0" specialFlags="0" errorOrTruncationOperation="Conversion" errorRowDisposition="FailComponent" truncationRowDisposition="FailComponent" externalMetadataColumnId="410"/></outputColumns><externalMetadataColumns isUsed="True"> <externalMetadataColumn id="392" name="÷åã îéåï" description="" precision="0" scale="0" length="0" dataType="r8" codePage="0"/> <externalMetadataColumn id="395" name="îôúç çùáåï" description="" precision="0" scale="0" length="255" dataType="wstr" codePage="0"/> <externalMetadataColumn id="398" name="ùà äçùáåï" description="" precision="0" scale="0" length="255" dataType="wstr" codePage="0"/> <externalMetadataColumn id="401" name="F4" description="" precision="0" scale="0" length="255" dataType="wstr" codePage="0"/> <externalMetadataColumn id="404" name="F5" description="" precision="0" scale="0" length="255" dataType="wstr" codePage="0"/> <externalMetadataColumn id="407" name="A#T" description="" precision="0" scale="0" length="255" dataType="wstr" codePage="0"/> <externalMetadataColumn id="410" name="A#C" description="" precision="0" scale="0" length="255" dataType="wstr" codePage="0"/></externalMetadataColumns></output> <output id="375" name="Excel Source Error Output" description="" exclusionGroup="0" synchronousInputId="0" deleteOutputOnPathDetached="false" hasSideEffects="false" dangling="false" isErrorOut="true" isSorted="false" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed"><outputColumns> <outputColumn id="397" name="îôúç çùáåï" description="" lineageId="397" precision="0" scale="0" length="255" dataType="wstr" codePage="0" sortKeyPosition="0" comparisonFlags="0" specialFlags="0" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed" externalMetadataColumnId="0"/> <outputColumn id="400" name="ùà äçùáåï" description="" lineageId="400" precision="0" scale="0" length="255" dataType="wstr" codePage="0" sortKeyPosition="0" comparisonFlags="0" specialFlags="0" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed" externalMetadataColumnId="0"/> <outputColumn id="406" name="F5" description="" lineageId="406" precision="0" scale="0" length="255" dataType="wstr" codePage="0" sortKeyPosition="0" comparisonFlags="0" specialFlags="0" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed" externalMetadataColumnId="0"/> <outputColumn id="409" name="A#T" description="" lineageId="409" precision="0" scale="0" length="255" dataType="wstr" codePage="0" sortKeyPosition="0" comparisonFlags="0" specialFlags="0" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed" externalMetadataColumnId="0"/> <outputColumn id="412" name="A#C" description="" lineageId="412" precision="0" scale="0" length="255" dataType="wstr" codePage="0" sortKeyPosition="0" comparisonFlags="0" specialFlags="0" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed" externalMetadataColumnId="0"/> <outputColumn id="376" name="ErrorCode" description="" lineageId="376" precision="0" scale="0" length="0" dataType="i4" codePage="0" sortKeyPosition="0" comparisonFlags="0" specialFlags="1" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed" externalMetadataColumnId="0"/> <outputColumn id="377" name="ErrorColumn" description="" lineageId="377" precision="0" scale="0" length="0" dataType="i4" codePage="0" sortKeyPosition="0" comparisonFlags="0" specialFlags="2" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed" externalMetadataColumnId="0"/></outputColumns><externalMetadataColumns isUsed="False"/></output> </outputs> </component> <component id="413" name="OLE DB Destination" componentClassID="{E2568105-9550-4F71-A638-B7FE42E66922}" description="OLE DB Destination" localeId="-1" usesDispositions="true" validateExternalMetadata="True" version="4" pipelineVersion="0" contactInfo="OLE DB Destination;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;4"> <properties> <property id="414" name="CommandTimeout" dataType="System.Int32" state="default" isArray="false" description="The number of seconds before a command times out. A value of 0 indicates an infinite time-out." typeConverter="" UITypeEditor="" containsID="false" expressionType="None">0</property> <property id="415" name="OpenRowset" dataType="System.String" state="default" isArray="false" description="Specifies the name of the database object used to open a rowset." typeConverter="" UITypeEditor="" containsID="false" expressionType="None">[dbo].[AccountsDim]</property> <property id="416" name="OpenRowsetVariable" dataType="System.String" state="default" isArray="false" description="Specifies the variable that contains the name of the database object used to open a rowset." typeConverter="" UITypeEditor="" containsID="false" expressionType="None"></property> <property id="417" name="SqlCommand" dataType="System.String" state="default" isArray="false" description="The SQL command to be executed." typeConverter="" UITypeEditor="Microsoft.DataTransformationServices.Controls.ModalMultilineStringEditor, Microsoft.DataTransformationServices.Controls, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" containsID="false" expressionType="None"></property> <property id="418" name="DefaultCodePage" dataType="System.Int32" state="default" isArray="false" description="Specifies the column code page to use when code page information is unavailable from the data source." typeConverter="" UITypeEditor="" containsID="false" expressionType="None">1252</property> <property id="419" name="AlwaysUseDefaultCodePage" dataType="System.Boolean" state="default" isArray="false" description="Forces the use of the DefaultCodePage property value when describing character data." typeConverter="" UITypeEditor="" containsID="false" expressionType="None">false</property> <property id="420" name="AccessMode" dataType="System.Int32" state="default" isArray="false" description="Specifies the mode used to access the database." typeConverter="AccessMode" UITypeEditor="" containsID="false" expressionType="None">3</property> <property id="422" name="FastLoadKeepIdentity" dataType="System.Boolean" state="default" isArray="false" description="Indicates whether the values supplied for identity columns will be copied to the destination. If false, values for identity columns will be auto-generated at the destination. Applies only if fast load is turned on." typeConverter="" UITypeEditor="" containsID="false" expressionType="None">false</property> <property id="423" name="FastLoadKeepNulls" dataType="System.Boolean" state="default" isArray="false" description="Indicates whether the columns containing null will have null inserted in the destination. If false, columns containing null will have their default values inserted at the destinaton. Applies only if fast load is turned on." typeConverter="" UITypeEditor="" containsID="false" expressionType="None">false</property> <property id="424" name="FastLoadOptions" dataType="System.String" state="default" isArray="false" description="Specifies options to be used with fast load. Applies only if fast load is turned on." typeConverter="" UITypeEditor="" containsID="false" expressionType="None">TABLOCK,CHECK_CONSTRAINTS</property> <property id="425" name="FastLoadMaxInsertCommitSize" dataType="System.Int32" state="default" isArray="false" description="Specifies when commits are issued during data insertion. A value of 0 specifies that one commit will be issued at the end of data insertion. Applies only if fast load is turned on." typeConverter="" UITypeEditor="" containsID="false" expressionType="None">0</property></properties> <connections> <connection id="421" name="OleDbConnection" description="The OLE DB runtime connection used to access the database." connectionManagerID="{E5A37824-5AE6-4EFF-9714-8D2B16C31C78}"/></connections> <inputs> <input id="426" name="OLE DB Destination Input" description="" hasSideEffects="true" dangling="false" errorOrTruncationOperation="Insert" errorRowDisposition="FailComponent" truncationRowDisposition="NotUsed"><inputColumns> <inputColumn id="453" name="" description="" lineageId="411" usageType="readOnly" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed" externalMetadataColumnId="448"/> <inputColumn id="454" name="" description="" lineageId="399" usageType="readOnly" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed" externalMetadataColumnId="452"/> <inputColumn id="455" name="" description="" lineageId="408" usageType="readOnly" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed" externalMetadataColumnId="449"/> <inputColumn id="456" name="" description="" lineageId="405" usageType="readOnly" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed" externalMetadataColumnId="450"/> <inputColumn id="457" name="" description="" lineageId="396" usageType="readOnly" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed" externalMetadataColumnId="451"/> </inputColumns><externalMetadataColumns isUsed="True"> <externalMetadataColumn id="448" name="AccountGroup" description="" precision="0" scale="0" length="300" dataType="wstr" codePage="0"/> <externalMetadataColumn id="449" name="AccountType" description="" precision="0" scale="0" length="300" dataType="wstr" codePage="0"/> <externalMetadataColumn id="450" name="AccountSubType" description="" precision="0" scale="0" length="300" dataType="wstr" codePage="0"/> <externalMetadataColumn id="451" name="AccountNumber" description="" precision="0" scale="0" length="300" dataType="wstr" codePage="0"/> <externalMetadataColumn id="452" name="AccountName" description="" precision="0" scale="0" length="300" dataType="wstr" codePage="0"/></externalMetadataColumns></input> </inputs> <outputs> <output id="427" name="OLE DB Destination Error Output" description="" exclusionGroup="1" synchronousInputId="426" deleteOutputOnPathDetached="false" hasSideEffects="false" dangling="false" isErrorOut="true" isSorted="false" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed"><outputColumns> <outputColumn id="428" name="ErrorCode" description="" lineageId="428" precision="0" scale="0" length="0" dataType="i4" codePage="0" sortKeyPosition="0" comparisonFlags="0" specialFlags="1" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed" externalMetadataColumnId="0"/> <outputColumn id="429" name="ErrorColumn" description="" lineageId="429" precision="0" scale="0" length="0" dataType="i4" codePage="0" sortKeyPosition="0" comparisonFlags="0" specialFlags="2" errorOrTruncationOperation="" errorRowDisposition="NotUsed" truncationRowDisposition="NotUsed" externalMetadataColumnId="0"/></outputColumns><externalMetadataColumns isUsed="False"/></output> </outputs> </component> </components> <paths> <path id="430" name="Excel Source Output" description="" startId="374" endId="426"/> </paths></pipeline></DTS:ObjectData></DTS:Executable><DTS:Property DTS:Name="ObjectName">AccountsDim</DTS:Property><DTS:Property DTS:Name="DTSID">{8707563F-57F7-4679-BFC4-6EC66F6A5BD3}</DTS:Property><DTS:Property DTS:Name="Description"></DTS:Property><DTS:Property DTS:Name="CreationName">MSDTS.Package.1</DTS:Property><DTS:Property DTS:Name="DisableEventHandlers">0</DTS:Property></DTS:Executable> Whisky-my beloved dog who died suddenly on the 29/06/06-I miss u so much.
View Replies !
Export To Excel Too Many Rows For Excel
Hello, currently we have a web portal that will display a report, and has the export to excel enabled. The problem: Some of these queries can return more rows (65,000 + ) than an excep worksheet can handle. this crashes the report viewer object. So we wanted a method to retrieve how many rows are in the report before it is sent to excel to be transformed and sent to the user. here are the Questions: 1) is there a method to access a number of rows in a table of a report from the reportviewer object? 2) is there a way to have the excel object used by the report view know that the number of rows being exported exceeds the number max number of rows Excel can handle, and pass back a simplified error before it starts building the file? thanks for your time, Nate
View Replies !
HELP - How Do I Handle Blank Source Rows In DTS Pumps Tasks
Hi, I am having trouble handling empty rows in source files in a DTS pump task. The source file is a text file and the destination is an SQL 7 table. When the import comes apon an empty row, the DTS task aborts with the error message "Source columns unable to match to 'Date' type in destination table". At the start of the DTS ActiveX script I have added If DTSSource.Count = 0 Then Main = DTSTransformStat_SkipInsert Exit Function End If Even with this in, DTS still errors. I even put just a MSGBOX in and the error comes up before the box. Q - How can I handle this ? Q - Can I check at the end of the script, on the next line ? David
View Replies !
Mapping Column Headers From Source To Rows In A Spreadsheet
Hello, I am trying to do the following: I have been given an MS Access Database that has a table with columns I have to create a spreadsheet that will have the data stored in the column header as a row (essentially we are creating a spreadsheet that records all of the different columns in all of the different tables in the MS Access DB). Any suggestions???
View Replies !
Getting Id Values From Both Source And Target Rows When Duplicating Records
Hi, I am copying records in a table. The source table and the target table are the same. I need the value from the id-field from both the source and target row. Is there a way to do this with one query? I tried the following, but it doesn't seem to work: INSERT tableOne (value1, value2, value3) OUTPUT source.id, inserted.id SELECT value1, value2, value3 FROM tableOne AS source WHERE ID = @number
View Replies !
Delete Rows In Excel From DTS Package
I have a DTS package that needs to refresh data in 3 separate Excelspreadsheets on a daily basis. The problem is that unless I manuallydelete the previous day's data, it appends rather than replaces.I can't delete the excel files on a daily basis, as they have to bethere for the DTS package to be able to export to Excel. What I wantto do is create a VBScript (ActiveX Control) to delete all the rows ofdata except the first row within each spreadsheet as the first step ofthe DTS package. Then the remaining steps would run and thespreadsheets would only have the current day's data at the end of theprocess.Thanks for any help offered.
View Replies !
Export To Excel &> 65000 Rows
Hi We are trying to export some data from SQL server into an excel sheet. The data records will be like more than 1 lakh records. I noted that Excel has a constraint of not creating rows more than 65,000. In this case we need to create multiple workbooks in the excel sheet. Could you please help me how to creat multiple workbooks thru DTS in run time - if it is >65,000? Thanks
View Replies !
Importing Non-hidden Rows From Excel?
I have a need to import only non-hidden rows from an excel spreadsheet. When I create the package in SSIS, it imports everything. Due to the use of the data on the spreadsheet, we cannot simply delete the data. Is there a special setting in the Excel Source or Connection manager that can be set to "only import non-hidden rows"? Also, how do I go about setting the sheet with an index instead of the actual Sheet name? The user changes the sheet name at random, but I know I only need the first two sheets on the file. Thanks! Matt Michuta
View Replies !
|
TRACKER
