Using Variable In SQL IN Clause
I have a table name emp(empid) having one record as emp1.
Now i am writing
DECLARE @EmpID VARCHAR(8000)
SET @EmpID = '''Emp1'',''Emp2'''
Select * from emp
where empid in(@empid)
But there are no rows returned
can't i use variable in IN Clause. I have to achiev this backend only.
View Complete Forum Thread with Replies
Related Forum Messages:
Using A Variable In The FROM Clause
Is it possible to have a variable stand for the table names in a FROM clause for a select statement? If not, does anyone have any suggestions on how do do this instead? Thanks for any and all help, Michelle
View Replies !
Using Variable In Where Clause
I am trying to use a local variable and case statment in a where clause but I keep getting an error. I'm passing an input parameter into a stored procedure and based on the input parameter I want the WHERE clause to reflect. spOpenClosedList @openclose varchar(5) DECLARE @result varchar(12) if @openclose = 'open' Begin set @result = 'is null' end else set @result = 'is not null' SELECT * FROM WorkOrderTbl WHERE WorkOrderTbl.CompletedDate @result AND username = "Thomas"
View Replies !
Variable In Where Clause
Hi Gurus, Can any one help me making thhe following query work without using dynamic sql? use northwind declare @fc varchar set @fc = ' CustomerID ' Select * from dbo.Customers where @fc like 'a%' Thanks a lot in adv Korr
View Replies !
SQL WHERE Clause Passing In Variable
Hi All, Would somebody be able to help me from pulling my hair out!??I have a form with a radiobuttonlist. I would like to change my select statement depending on what radiobutton value is selected.E.g.SELECT * FROM table WHERE <<variable from radiobuttonlist>> LIKE 'Y'So,if radiobutton value selected = 1, it will select * from column A in the dbif radiobutton value select = 2, it will select from column B in the dband so on... Am i attempting to do the impossible?Thanks All,
View Replies !
Order By Clause Using A Variable
I am trying to pass as an input parameter a user selected order by clause, and instead of repeating the SQL statement with a new Order By based on the parameter, I want to set the Order by using this parameter. I can't get it to work. Here is the statement: Create Procedure sp_InfoDump ( @StartDate varchar(12), @EndDate varchar(12), @OrderBy varchar(50) ) As /* Local variables */ DECLARE @MinDate datetime, @MaxDate datetime IF @StartDate = 'ALL DATES' BEGIN SELECT @MinDate = Min(AccessTime) FROM tblAudit END ELSE BEGIN SELECT @MinDate = @StartDate END IF @EndDate = 'ALL DATES' BEGIN SELECT @MaxDate = Max(AccessTime) FROM tblAudit END ELSE BEGIN SELECT @MaxDate = @StartDate END BEGIN SELECT tblReports.ReportName, tblReports.ReportCode, tblAudit.BadAttempts, tblAudit.LogonUser, tblAudit.AccessTime, tblAudit.RemoteHost, tblAudit.RemoteIdent, tblAudit.ExitTime, tblAudit.BrowserType, tblAudit.Access_ID, TotalTime=DateDiff(Minute,tblAudit.AccessTime,tblA udit.ExitTime) FROM tblReports INNER JOIN tblReportsAccess ON tblReports.Report_ID = tblReportsAccess.Report_ID INNER JOIN tblAudit ON tblReportsAccess.Audit_ID = tblAudit.Audit_ID WHERE tblAudit.AccessTime >= @MinDate AND tblAudit.AccessTime <= @MaxDate ORDER BY (SELECT 'ColumnName'=ColumnName FROM tblOrderBy WHERE ColumnName = @OrderBy) END RETURN
View Replies !
Using A @Variable As An IN Clause Expression
Is there a good way to use a @variable in a Stored procedure to represent the expressions for an IN clause I.e. I need to accomplish the following: Create Procedure sp_ABC @Variable VarChar (1024) AS Select * From tblAnyTable Where intTableID IN (@Variable) Is there a valid way to accomplish this? The above code presented here does not work, because the VarChar cannot be translated into int.
View Replies !
CONTAIN Clause Not Taking A Variable?
Hi, I created a full-text catalog on a table and ran a contain clause against it with a declare variable on the search. Example.... DECLARE @chrClause VARCHAR(204) SET @chrClause = ' "XXXX" ' SELECT ID FROM Emp WHERE CONTAINS(Tax_Nam, @chrClause) I'm getting an error that says... Line 8: Incorrect syntax near '@chrContainClause'. Is this a problem i can fix by applying SP3?
View Replies !
Variable To Store String For Where Clause
I want to declare a variable that will serve as my where clause. The variable will be passed in from our website. Does anyone have any information or can guide me in the right direction to do this? example: @variable varchar(1000) SELECT * FROM table WHERE @variable (The @variable would reflect the where clause string) Thanks!
View Replies !
Cursor Declared With Variable In Where Clause
When I execute next query on sqlserver 6.5 nested in stored procedure I can see that 'open testCursor' selected rows using new value of @var. When I execute query on sqlserver 7.0 I can see that 'open testCursor' selected rows using value of @var before 'declare ... cursor'. Is there any way to force sqlserver 7.0 to proccess cursor like it did it before. select @var = oldValue declare testCursor cursor for select someColumns from someTable where someColumn = @var select @var = newValue open testCursor fetch next from testCursor into @someColumns Thank's in advance. Mirko.
View Replies !
Use A Variable Along With The FROM Clause In SELECT Statement
I have a table 'table_list' which contains two columns, table_name and a record_count. This table stores a list of tables and their corresponding record counts. What I am trying to do is, to be able to write a select statement, that can read each table name in the 'table_name' column, execute a select count(*) for the same, and update its record_count with the result of select count(*). This is the code in my procedure.. DECLARE @tab_list CURSOR set @tab_list = CURSOR FOR select * from table_list OPEN @tab_list DECLARE @tab_name varchar(256) DECLARE @rec_cnt int FETCH NEXT FROM @tab_list INTO @tab_name, @rec_cnt select count(*) from @tab_name This select is looping around along with FETCH till all the table names are exhausted and their counts are updated from the cursor back into the table. Problem is that, I am not able to use select count(*) from @tab_name, and its not accepting a variable there. Please help me to construct the select statement that is similiar to x=<table name> select * from x where x is a variable and the table name gets substituted. what is the syntax for it ?
View Replies !
Passing Variable To Where Clause In Sql Query From A Grid
Hi everyone I am new to this site I have a major issue I cant figure out seeing how im fairly new to asp, and vb, but i have 5 years php mysql experience. Im pulling the correct data into a grid. Then i need to make a button or some sort of link that will take the value of one field in the record set and replace it with @transid in the where statement I can enter in the value of transid into form field with that name and it will run the rest of the script correctly, I just cant get past this hurdle. If anyone can help that would be great. I tried to get this to work with java script but then realized thats not possible to transfer varaibles to asp from it. ///javascript function DisplayReciept(transactionnum) { recieptdis = transactionnum; } ////field in grid <asp:BoundField htmlEncode=false DataFormatString="<a href=javascript:DisplayReciept{0}>Display</a>" DataField="transid" HeaderText="Show Reciept" SortExpression="transid" /> //////////////query////////////// <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:dbsgcConnectionString %>" SelectCommand="SELECT [fulldata] FROM [data] WHERE ([transid] = @transid)"> <SelectParameters> <asp:FormParameter FormField="transid" Name="transid" Type="Int32" /> </SelectParameters> </asp:SqlDataSource>
View Replies !
How To Include Variable In CURSOR SQL Filter Clause?
After trying every way I could come up with I can't get a filter clauseto work with a passed variable ...I have a cursor that pulls a filter string from a table (works OK),then I want to use that filter in a second cursor, but can't get thesyntax ...@bakfilter is equal to "MISV2_db_%.BAK" before I try to open and fetchfrom the second cursor. Here is the cursor declaration:DECLARE curFiles CURSOR FORSELECT FileName, FileDateFROM DataFileWHERE (((Active)=1) AND ((FileName) LIKE '@bak_filter'))ORDER BY FileDate DESCWhat do I need to do to get it to use the string contained in@bak_filter?Thanks in advance, Jim
View Replies !
Using A Stored Procedure Variable To Define A Where Clause
Hi all, I'm trying to build a Where clause in a stored procedure based on the information that is passed into the stored procedure. Because I don't know how many items will be passed into the stored procedure, I'm having to split the string on a specific character and build the Where clause based on how many strings are found. However, when I try to execute the Where clause it throws an error. Code Snippet ALTER PROCEDURE getUsersAddress -- Add the parameters for the stored procedure here @LName varchar(1000) @City varchar(1000), @State varchar(1000), @License varchar(1000) AS declare @Count as int declare @x as int declare @wLName as varchar(2000) declare @wCityas varchar(2000) declare @wStateas varchar(2000) declare @wLicense as varchar(2000) BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; if right(rtrim(@LName),1) <> ';' begin set @LName = @LName + ';' end set @Count = PATINDEX('%;%',@LName) set @wLName = '(tblUsers.LName = ''' while @Count <> 0 begin set @wLName = @wLName + left(@LName, @Count - 1) set @LName = stuff(@LName, 1, @Count, '') set @Count = PATINDEX('%;%',@LName); if @Count <> 0 begin set @wLName = @wLName + ''') OR (tblUsers.LName = ''' end else begin set @wLName = @wLName + ''')' end end print cast(@wLName as varchar(5000)) -- Insert statements for procedure here SELECT tblUsers.FullName, tblUsers.Addy1, tblUsers.Addy2, tblUsers.City, tblState.StateAbbr, tblUsers.Zip, tblUsers.Zip4 FROM tblUsers INNER JOIN tblState ON tblUsers.FK_StateID = tblState.StateID INNER JOIN tblUserDetails ON tblUsers.UserID = tblUserDetails.FK_UserID WHERE (@wLName) OR (tblUsers.City = @City) OR (tblState.StateAbbr = @State) OR (tblUserDetails.CDLType = @License) END So when I print do an exec getUsersAddress 'Johnson;Smith', 'City;Test City', 'TX;OK', 'Class A;Class B' @wLName comes out as (tblUsers.LName = 'Johnson') OR (tblUsers.LName = 'Smith') However, I can't save the procedure as it gives me an error of: An expression of non-boolean type specified in a context where a condition is expected, near 'OR'. When I copy and paste the @wLName value in place of @wLName in the Where clause it works, so how can I get the @wLName variable to work in that Where clause?
View Replies !
SQL Select Command With Where Clause Variable Based On ASP.NET TextBox
All, Please can someone advise how to use SQL select statement with where clasue which is based on a textBox.text value. ex. below example I set the textbox.text value to a C# variable called TextBoxValue1 but I receive error this is not a valid This is all done in Page_Load event backend code. string strCommandtext = "Select Type.TypeName, Type.TypeDesc FROM Type Where Type.TypeName = TextBoxValue1";
View Replies !
Combing In A Cursor, A Select Statement With The WHERE Clause Stored In A Variable
Hi I am ramesh here from go-events.com I am using sql mail to send out emails to my mailing list I have difficulty combining a select statement with a where clause stored in a variable inside a cursor The users select the mail content and frequency of delivery and i deliver the mail I use lots of queries and a stored procedure to retrieve thier preferences. In the end i use a cursor to send out mails to each of them. Because my query is dynamic, the where clause of my select statement is stored in a variable. I have the following code that does not work For example DECLARE overdue3 CURSOR LOCAL FORWARD_ONLY FOR SELECT DISTINCT Events.E_Name, Events.E_SDate, Events.E_City, Events.E_ID FROM Events, IndustryEvents + @sqlquery2 OPEN overdue3 I get an error message at the '+' sign which says, cannot use empty object or column names, use a single space if necessary How do I combine the select statement with the where clause? Help me...I need help urgently
View Replies !
GROUP By Clause Or DISTINCT Clause
Hi, can anyone shed some light on this issue?SELECT Status from lupStatuswith a normal query it returns the correct recordcountSELECT Status from lupStatus GROUP BY Statusbut with a GROUP By clause or DISTINCT clause it return the recordcount= -1
View Replies !
Filtering Results In The Where Clause Vs A Having Clause
I am working with a vendor on upgrading their application from SQL2K to SQL2K5 and am running into the following. When on SQL Server 2000 the following statement ran without issue: UPDATE dbo.Track_ID SET dbo.Track_ID.Processed = 4 --Regular 1 leg call thats been completed WHERE Processed = 0 AND LegNum = 1 AND TrackID IN ( SELECT TrackID FROM dbo.Track_ID GROUP BY TrackID HAVING MAX(LegNum) = 1 AND TrackID + 'x1' IN ( SELECT dbo.Track_ID.TrackID + 'x' + CONVERT(NVARCHAR(2), COUNT(dbo.Track_ID.TrackID)) FROM dbo.Track_ID INNER JOIN dbo.transactions ON dbo.Track_ID.SM_ID = dbo.transactions.sm_session_id GROUP BY dbo.Track_ID.TrackID ) ) Once moved to SQL Server 2005 the statement would not return and showed SOS_SCHEDULER_YIELD to be the waittype when executed. This machine is SP1 and needs to be upgraded to SP2, something that is not going to happen near time. I changed the SQL to the following, SQL Server now runs it in under a second, but now the app is not functioning correctly. Are the above and the following semantically the same? UPDATE dbo.Track_ID SET dbo.Track_ID.Processed = 4 --Regular 1 leg call thats been completed WHERE Processed = 0 AND LegNum = 1 AND TrackID IN ( SELECT TrackID FROM dbo.Track_ID WHERE TrackID + 'x1' IN ( SELECT dbo.Track_ID.TrackID + 'x' + CONVERT(NVARCHAR(2), COUNT(dbo.Track_ID.TrackID)) FROM dbo.Track_ID INNER JOIN dbo.transactions ON dbo.Track_ID.SM_ID = dbo.transactions.sm_session_id GROUP BY dbo.Track_ID.TrackID ) GROUP BY TrackID HAVING MAX(LegNum) = 1 )
View Replies !
Expression Defined In SELECT Clause Overwrites Column Defined In FROM Clause
2 examples: 1) Rows ordered using textual id rather than numeric id Code Snippet select cast(v.id as nvarchar(2)) id from ( select 1 id union select 2 id union select 11 id ) v order by v.id Result set is ordered as: 1, 11, 2 I expect: 1,2,11 if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine. 2) SQL server reject query below with next message Server: Msg 169, Level 15, State 3, Line 16 A column has been specified more than once in the order by list. Columns in the order by list must be unique. Code Snippet select cast(v.id as nvarchar(2)) id from ( select 1 id union select 2 id union select 11 id ) v cross join ( select 1 id union select 2 id union select 11 id ) u order by v.id ,u.id Again, if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine. It reproducible on Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2) and Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2) In both cases database collation is SQL_Latin1_General_CP1251_CS_AS If I check quieries above on database with SQL_Latin1_General_CP1_CI_AS collation then it works fine again. Could someone clarify - is it bug or expected behaviour?
View Replies !
Having Clause Without GROUP BY Clause?
Hi, What is HAVING clause equivalent in the following oracle query, without the combination of "GROUP BY" clause ? eg : SELECT SUM(col1) from test HAVING col2 < 5 SELECT SUM(col1) from test WHERE x=y AND HAVING col2 < 5 I want the equivalent query in MSSQLServer for the above Oracle query. Also, does the aggregate function in Select column(here the SUM(col1)) affect in anyway the presence of HAVING clause?. Thanks, Gopi.
View Replies !
SQL Inner Join Clause And The Where Clause
Hi everyone, I saw some queries where SQL inner join clause and the where clause is used at the same time. I knew that "on" is used instead of the "where" clause. Would anyone please exaplin me why both "where" and "on" clause is used in some sql Select queries ? Thanks
View Replies !
Diff In On Clause And Where Clause?????
hi.. i have basic question like what is differance between conditions put in ON clause and in WHERE clause in JOINS???? see conditions that shown in brown color select d1.SourceID, d1.PID, d1.SummaryID, d1.EffectiveDate, d1.Audit, d1.ExpirationDate, d1.Indicator from[DB1].[dbo].[Implicit] d1 inner join [DB2].[dbo].[Implicit] d2 on d1.SummaryID=d2.SummaryID AND d1.ListType = d2.ListType AND (d1.EffectiveDate <= d2.ExpirationDate or d2.ExpirationDate is null) AND (d1.ExpirationDate >= d2.EffectiveDate or d1.ExpirationDate is null) whered1.ImplicitID >= d2.ImplicitID AND (d1.SourceID<>d2.SourceID OR (d1.SourceID IS NULL AND d2.SourceID IS NOT NULL) OR (d1.SourceID IS NOT NULL AND d2.SourceID IS NULL) ) select d1.SourceID, d1.PID, d1.SummaryID, d1.EffectiveDate, d1.Audit, d1.ExpirationDate, d1.Indicator from[DB1].[dbo].[Implicit] d1 inner join [DB2].[dbo].[Implicit] d2 on d1.SummaryID=d2.SummaryID AND d1.ImplicitID = d1.ImplicitIDAND d1.ListType = d2.ListType AND (d1.EffectiveDate <= d2.ExpirationDate or d2.ExpirationDate is null) AND (d1.ExpirationDate >= d2.EffectiveDate or d1.ExpirationDate is null) whered1.ImplicitID >= d2.ImplicitID AND (d1.SourceID<>d2.SourceID OR (d1.SourceID IS NULL AND d2.SourceID IS NOT NULL) OR (d1.SourceID IS NOT NULL AND d2.SourceID IS NULL) ) another thing... if we put AND d1.ImplicitID = d1.ImplicitID condition in second query then shall we remove d1.ImplicitID >= d2.ImplicitID from WHERE clause????
View Replies !
Top Clause With GROUP BY Clause
How Can I use Top Clause with GROUP BY clause? Here is my simple problem. I have two tables Categories Products I want to know Top 5 Products in CategoryID 1,2,3,4,5 Resultset should contain 25 Rows ( 5 top products from each category ) I hope someone will help me soon. Its urngent thanks in advance regards Waqas
View Replies !
SSIS Script Task Alters Package Variable, But Variable Does Not Change.
I'm working on an SSIS package that uses a vb.net script to grab some XML from a webservice (I'd explain why I'm not using a web service task here, but I'd just get angry), and I wish to then assign the XML string to a package variable which then gets sent along to a DataFlow Task that contains an XML Source that points at said variable. when I copy the XML string into the variable value in the script, if do a quickwatch on the variable (as in Dts.Variable("MyXML").value) it looks as though the new value has been copied to the variable, but when I step out of that task and look at the package explorer the variable is its original value. I think the problem is that the dataflow XML source has a lock on the variable and so the script task isn't affecting it. Does anyone have any experience with this kind of problem, or know a workaround?
View Replies !
Passing A SSIS Global Variable To A Declared Variable In A Query In SQL Task
I have a SQL Task that updates running totals on a record inserted using a Data Flow Task. The package runs without error, but the actual row does not calculate the running totals. I suspect that the inserted record is not committed until the package completes and the SQL Task is seeing the previous record as the current. Here is the code in the SQL Task: DECLARE @DV INT; SET @DV = (SELECT MAX(DateValue) FROM tblTG); DECLARE @PV INT; SET @PV = @DV - 1; I've not been successful in passing a SSIS global variable to a declared parameter, but is it possible to do this: DECLARE @DV INT; SET @DV = ?; DECLARE @PV INT; SET @PV = @DV - 1; I have almost 50 references to these parameters in the query so a substitution would be helpful. Dan
View Replies !
SSIS Error Reading XML Loaded Into Variable With XML Source Using XML File From Variable.
Hi I am getting the following error when trying to extract data using XML source " Error: 0xC02090D0 at Data Flow Task - Load XML data to database, XML Source - Load XML data from variable [15893]: The component "XML Source - Load XML data from variable" (15893) was unable to read the XML data." What I have done is read XML data from file and stripped out DTD contents using XSLT transformation in an XML task. The XML file is loaded into a string variable called XMLProduct. Next I have a XML task to validate the variable contents against the XSD, which works. Then I am trying to load the data using XML Source within a Data Flow task, which is when the error occurs. If before I enter the Data Flow and use a script task to read the content of XMLProduct variable and save that to a file then point XML Source task to the file it works ok. I need to iterate through a whole bunch of XML files so reading it into a variable would be the preferred option if it worked of course. Any help would be hugely appreciated. Edit --- I have saved the output from the XSLT transformation XML Task to file and not a variable then read that in using the XML source task and it worked. It would be nice to get the variable method working though as it would save having to create another file. It is a work around at the moment though.
View Replies !
SSIS: Problem Mapping Global Variables To Stored Procedure. Can't Pass One Variable To Sp And Return Another Variable From Sp.
I'm new to SSIS, but have been programming in SQL and ASP.Net for several years. In Visual Studio 2005 Team Edition I've created an SSIS that imports data from a flat file into the database. The original process worked, but did not check the creation date of the import file. I've been asked to add logic that will check that date and verify that it's more recent than a value stored in the database before the import process executes. Here are the task steps. [Execute SQL Task] - Run a stored procedure that checks to see if the import is running. If so, stop execution. Otherwise, proceed to the next step. [Execute SQL Task] - Log an entry to a table indicating that the import has started. [Script Task] - Get the create date for the current flat file via the reference provided in the file connection manager. Assign that date to a global value (FileCreateDate) and pass it to the next step. This works. [Execute SQL Task] - Compare this file date with the last file create date in the database. This is where the process breaks. This step depends on 2 variables defined at a global level. The first is FileCreateDate, which gets set in step 3. The second is a global variable named IsNewFile. That variable needs to be set in this step based on what the stored procedure this step calls finds out on the database. Precedence constraints direct behavior to the next proper node according to the TRUE/FALSE setting of IsNewFile. If IsNewFile is FALSE, direct the process to a step that enters a log entry to a table and conclude execution of the SSIS. If IsNewFile is TRUE, proceed with the import. There are 5 other subsequent steps that follow this decision, but since those work they are not relevant to this post. Here is the stored procedure that Step 4 is calling. You can see that I experimented with using and not using the OUTPUT option. I really don't care if it returns the value as an OUTPUT or as a field in a recordset. All I care about is getting that value back from the stored procedure so this node in the decision tree can point the flow in the correct direction. CREATE PROCEDURE [dbo].[p_CheckImportFileCreateDate] /* The SSIS package passes the FileCreateDate parameter to this procedure, which then compares that parameter with the date saved in tbl_ImportFileCreateDate. If the date is newer (or if there is no date), it updates the field in that table and returns a TRUE IsNewFile bit value in a recordset. Otherwise it returns a FALSE value in the IsNewFile column. Example: exec p_CheckImportFileCreateDate 'GL Account Import', '2/27/2008 9:24 AM', 0 */ @ProcessName varchar(50) , @FileCreateDate datetime , @IsNewFile bit OUTPUT AS SET NOCOUNT ON --DECLARE @IsNewFile bit DECLARE @CreateDateInTable datetime SELECT @CreateDateInTable = FileCreateDate FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName IF EXISTS (SELECT ProcessName FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName) BEGIN -- The process exists in tbl_ImportFileCreateDate. Compare the create dates. IF (@FileCreateDate > @CreateDateInTable) BEGIN -- This is a newer file date. Update the table and set @IsNewFile to TRUE. UPDATE tbl_ImportFileCreateDate SET FileCreateDate = @FileCreateDate WHERE ProcessName = @ProcessName SET @IsNewFile = 1 END ELSE BEGIN -- The file date is the same or older. SET @IsNewFile = 0 END END ELSE BEGIN -- This is a new process for tbl_ImportFileCreateDate. Add a record to that table and set @IsNewFile to TRUE. INSERT INTO tbl_ImportFileCreateDate (ProcessName, FileCreateDate) VALUES (@ProcessName, @FileCreateDate) SET @IsNewFile = 1 END SELECT @IsNewFile The relevant Global Variables in the package are defined as follows: Name : Scope : Date Type : Value FileCreateDate : (Package Name) : DateType : 1/1/2000 IsNewFile : (Package Name) : Boolean : False Setting the properties in the "Execute SQL Task Editor" has been the difficult part of this. Here are the settings. General Name = Compare Last File Create Date Description = Compares the create date of the current file with a value in tbl_ImportFileCreateDate. TimeOut = 0 CodePage = 1252 ResultSet = None ConnectionType = OLE DB Connection = MyServerDataBase SQLSourceType = Direct input IsQueryStoredProcedure = False BypassPrepare = True I tried several SQL statements, suspecting it's a syntax issue. All of these failed, but with different error messages. These are the 2 most recent attempts based on posts I was able to locate. SQLStatement = exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output SQLStatement = exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output Parameter Mapping Variable Name = User::FileCreateDate, Direction = Input, DataType = DATE, Parameter Name = 0, Parameter Size = -1 Variable Name = User::IsNewFile, Direction = Output, DataType = BYTE, Parameter Name = 1, Parameter Size = -1 Result Set is empty. Expressions is empty. When I run this in debug mode with this SQL statement ... exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output ... the following error message appears. SSIS package "MyPackage.dtsx" starting. Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning. Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. Task failed: Compare Last File Create Date Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "MyPackage.dtsx" finished: Failure. When the above is run tbl_ImportFileCreateDate does not get updated, so it's failing at some point when calling the procedure. When I run this in debug mode with this SQL statement ... exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output ... the tbl_ImportFileCreateDate table gets updated. So I know that data piece is working, but then it fails with the following message. SSIS package "MyPackage.dtsx" starting. Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning. Error: 0xC001F009 at GLImport: The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. ". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. Task failed: Compare Last File Create Date Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "MyPackage.dtsx" finished: Failure. The IsNewFile global variable is scoped at the package level and has a Boolean data type, and the Output parameter in the stored procedure is defined as a Bit. So what gives? The "Possible Failure Reasons" message is so generic that it's been useless to me. And I've been unable to find any examples online that explain how to do what I'm attempting. This would seem to be a very common task. My suspicion is that one or more of the settings in that Execute SQL Task node is bad. Or that there is some cryptic, undocumented reason that this is failing. Thanks for your help.
View Replies !
Compare The Value Of A Variable With Previous Variable From A Function ,reset The Counter When Val Changes
I am in the middle of taking course 2073B €“ Programming a Microsoft SQL Server 2000 Database. I noticed that in Module9: Implementing User-Defined Functions exercise 2, page 25; step 2 is not returning the correct answer. Select employeeid,name,title,mgremployeeid from dbo.fn_findreports(2) It returns manager id for both 2 and 5 and I think it should just return the results only for manager id 2. The query results for step 1 is correct but not for step 2. Somewhere in the code I think it should compare the inemployeeid with the previous inemployeeid, and then add a counter. If the two inemployeeid are not the same then reset the counter. Then maybe add an if statement or a case statement. Can you help with the logic? Thanks! Here is the code of the function in the book: /* ** fn_FindReports.sql ** ** This multi-statement table-valued user-defined ** function takes an EmplyeeID number as its parameter ** and provides information about all employees who ** report to that person. */ USE ClassNorthwind GO /* ** As a multi-statement table-valued user-defined ** function it starts with the function name, ** input parameter definition and defines the output ** table. */ CREATE FUNCTION fn_FindReports (@InEmployeeID char(5)) RETURNS @reports TABLE (EmployeeID char(5) PRIMARY KEY, Name nvarchar(40) NOT NULL, Title nvarchar(30), MgrEmployeeID int, processed tinyint default 0) -- Returns a result set that lists all the employees who -- report to a given employee directly or indirectly AS BEGIN DECLARE @RowsAdded int -- Initialize @reports with direct reports of the given employee INSERT @reports SELECT EmployeeID, Name = FirstName + ' ' + LastName, Title, ReportsTo, 0 FROM EMPLOYEES WHERE ReportsTo = @InEmployeeID SET @RowsAdded = @@rowcount -- While new employees were added in the previous iteration WHILE @RowsAdded > 0 BEGIN -- Mark all employee records whose direct reports are going to be -- found in this iteration UPDATE @reports SET processed = 1 WHERE processed = 0 -- Insert employees who report to employees marked 1 INSERT @reports SELECT e.EmployeeID, Name = FirstName + ' ' + LastName , e.Title, e.ReportsTo, 0 FROM employees e, @reports r WHERE e.ReportsTo = r.EmployeeID AND r.processed = 1 SET @RowsAdded = @@rowcount -- Mark all employee records whose direct reports have been -- found in this iteration UPDATE @reports SET processed = 2 WHERE processed = 1 END RETURN -- Provides the value of @reports as the result END GO
View Replies !
Debug Error - Object Variable Or With Block Variable Not Set -
I keep getting this debug error, see my code below, I have gone thru it time and time agian and do not see where the problem is. I have checked and have no NULL values that I'm trying to write back. ~~~~~~~~~~~ Error: System.NullReferenceException was unhandled by user code Message="Object variable or With block variable not set." Source="Microsoft.VisualBasic" ~~~~~~~~~~~~ My Code Dim DBConn As SqlConnection Dim DBAdd As New SqlCommand Dim strConnect As String = ConfigurationManager.ConnectionStrings("ProtoCostConnectionString").ConnectionString DBConn = New SqlConnection(strConnect) DBAdd.CommandText = "INSERT INTO D12_MIS (" _ & "CSJ, EST_DATE, RECORD_LOCK_FLAG, EST_CREATE_BY_NAME, EST_REVIEW_BY_NAME, m2_1, m2_2_date, m2_3_date, m2_4_date, m2_5, m3_1a, m3_1b, m3_2a, m3_2b, m3_3a, m3_3b" _ & ") values (" _ & "'" & Replace(vbCSJ.Text, "'", "''") _ & "', " _ & "'" & Replace(tmp1Date, "'", "''") _ & "', " _ & "'" & Replace(tmpRecordLock, "'", "''") _ & "', " _ & "'" & Replace(CheckedCreator, "'", "''") _ & "', " _ & "'" & Replace(CheckedReviewer, "'", "''") _ & "', " _ & "'" & Replace(vb2_1, "'", "''") _ & "', " _ & "'" & Replace(tmp2Date, "'", "''") _ & "', " _ & "'" & Replace(tmp3Date, "'", "''") _ & "', " _ & "'" & Replace(tmp4Date, "'", "''") _ & "', " _ & "'" & Replace(vb2_5, "'", "''") _ & "', " _ & "'" & Replace(vb3_1a, "'", "''") _ & "', " _ & "'" & Replace(vb3_1b, "'", "''") _ & "', " _ & "'" & Replace(vb3_2a, "'", "''") _ & "', " _ & "'" & Replace(vb3_2b, "'", "''") _ & "', " _ & "'" & Replace(vb3_3a, "'", "''") _ & "', " _ & "'" & Replace(vb3_3b, "'", "''") _ & "')" DBAdd.Connection = DBConn DBAdd.Connection.Open() DBAdd.ExecuteNonQuery() DBAdd.Connection.Close()
View Replies !
How To Match The Date Variable And Character Variable
Hello, I run the DTS to copy data from Progress to SQL Server. How can match/convert the date variables to check. The field p-date as format 'mm-dd-year' . It has the value of 10/09/2001. The field s-date as varchar format. It has the value 2001-10-09. How can use the where condition ( Select ...... WHERE p-date = s-date.) Thanks
View Replies !
Variable Indirection: Choosing Variable At Runtime
Hello! I'm using SQL Server 2000. I have a variable which contains the name of another variable scoped in my stored procedure. I need to get the value of that other variable, namely: DECLARE @operation VARCHAR(3) DECLARE @parameterValue VARCHAR(50) SELECT @operation='DIS' CREATE table #myTable(value VARCHAR(20)) INSERT into #myTable values('@operation') SELECT top 1 @parameterValue = value from #myTable -- Now @parameterValue is assigned the string '@operation' -- Here I need some way to retrieve the value of the @operation variable I declared before (in fact -- another process writes into the table I retrieved the value from), in this case 'DIS' DROP TABLE #myTable I've tried several ways, but didn't succeed yet! Please tell me there's a way to solve my problem!!! Thank you very much in advance!
View Replies !
Foreach From Variable Using 2 Dim Array Variable
Is there any way to use a 2 dimensional array of strings as the Variable Enumerator for the "Foreach From Variable Enumerator". I am trying to copy a collection of files from folder A to folder B. In a script, I would populate, let us say, an array of (2,10), for 10 files, with one column representing the source file and other column representing the target column task. Then I would like to set this string array variable as the "Variable Enumerator" for the "Foreach From Variable Enumerator" and use file system tasks in the foreach loop to perform the tasks. The problem is that the "Foreach From Variable Enumerator" does not let me choose an index, but passes only one index 0, so, I will only be able to pass just one column. How do I let the foreach enumerator let me choose an index. The other foreach enumerators, foreach item and ADO give me the option to select index. I would like the same functionality in the foreach variable. Note: I cannot use the "For Each File" enumerator, since the files are to be selected by a script only. Thanks for the help.
View Replies !
SQL Variable And IS Variable In Execute SQL Task
Hi, I have an Execute SQL Task (OLE DB Connnection Manager) with a SQL script in it. In this script I use several SQL variables (@my_variable). I would like to assign an IS variable ([User::My_Variable]) to one of my SQL variables on this script. Example: DECLARE @my_variable int , <several_others> SET @my_variable = ? <do_some_stuff> Of course, I also set up the parameter mapping. However, it seems this is not possible. Assigning a variable using a ? only seems to work in simple T-SQL statements. I have several reasons for wanting to do this: - the script uses several variables, several times. Not all SQL variables are assigned via IS variables. - For reading and mainenance purposes, I prefer to pass the variable only once. Otherwise every time the script changes u need to keep track of all questionmarks and their order. - Passing the variable once also makes it easier to design the script outside IS using Management Studio. - This script only does preparation for the actual ETL, so I prefer to keep it in one task instead of taking it apart to several consecutive Execute SQL Tasks. - I prefer to use the OLE DB connection manager because it's a de facto standard here. Could anyone help me out with the following questions: - Is the above possible? - If so, how? - If not, why not? - If not, what would be the best way around this problem? Thanx in advance, Pipo
View Replies !
Variable Inside A Variable From Sql TAsk
I've got two Sql Tasks on my dtsx. The first one loads a value into "Proyecto" user variable and the second one executes a variable named "SegundoProceso" which contains from the beginning: "select Fecha from LogsCargaExcel where Proyecto = " + @[User::Proyecto] +"" As SqlSourceType propety I have "Variable" and inside ResultSet or Parameter Mapping nodes there is nothing. [Execute SQL Task] Error: Executing the query ""select Fecha from LogsCargaExcel where Proyecto = " + @[User::Proyecto] +""" failed with the following error: "Cannot use empty object or column names. Use a single space if necessary.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. Where am I wrong? TIA
View Replies !
Passing Variable Value Through Environment Variable
Hi All! I have a parent package that contains two children... The second child depends on the succes of the first child. THe first child generates a variable value and stores it in an Environment variable ( Visibility - All ) ...After the first succeeds, the second will start executing and will pick up the variable value from environment variable( through package configuration setting )... Unfortunately, this doesn't work...As the second child picks the stale value of the environment variables...Essentially it assigns variable value not after the first child is finished, but right at the beginning of parent execution... I tried to execute coth children as Out Of Proc as well as In Proc...The same Would anybody have an idea how to resolve this problem? Thanks in advance for any help! Vladimir
View Replies !
Cannot Set A Variable From A Select Statement That Contains A Variable??? Help Please
I am trying to set a vaiable from a select statement DECLARE @VALUE_KEEP NVARCHAR(120), @COLUMN_NAME NVARCHAR(120) SET @COLUMN_NAME = (SELECT COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'CONTACTS' AND COLUMN_NAME = 'FIRSTNAME') SET @VALUE_KEEP = (SELECT @COLUMN_NAME FROM CONTACTS WHERE CONTACT_ID = 3) PRINT @VALUE_KEEP PRINT @COLUMN_NAME RESULTS ------------------------------------------------------------------------------------------- FirstName <-----------@VALUE_KEEP FirstName <-----------@COLUMN_NAME SELECT @COLUMN_NAME FROM CONTACTS returns: FirstName SELECT FirstName from Contacts returns: Brent How do I make this select statement work using the @COLUMN_NAME variable? Any help greatly appreciated!
View Replies !
Is It Possible To Re-reference A Column Alias From A Select Clause In Another Column Of The Same Select Clause?
Example, suppose you have these 2 tables(NOTE: My example is totally different, but I'm simply trying to setupthe a simpler version, so excuse the bad design; not the point here)CarsSold {CarsSoldID int (primary key)MonthID intDealershipID intNumberCarsSold int}Dealership {DealershipID int, (primary key)SalesTax decimal}so you may have many delearships selling cars the same month, and youwanted a report to sum up totals of all dealerships per month.select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',sum(cs.NumberCarsSold) * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDMy question is, is there a way to achieve something like this:select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',TotalCarsSoldInMonth * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDNotice the only difference is the 3rd column in the select. Myparticular query is performing some crazy math and the only way I knowof how to get it to work is to copy and past the logic which isgetting out way out of hand...Thanks,Dave
View Replies !
Variable Insert To SQL Server Insert Satement Setting Values For The @variable INSIDE Sql
ok, I am on Day 2 of being brain dead.I have a database with a table with 2 varchar(25) columns I have a btton click event that gets the value of the userName, and a text box.I NEED to insert a new row in a sql database, with the 2 variables.Ive used a sqldatasource object, and tried to midify the insert parameters, tried to set it at the button click event, and NOTHING is working. Anyone have a good source for sql 101/ASP.Net/Braindead where I can find this out, or better yet, give me an example. this is what I got <%@ Page Language="C#" %><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><script runat="server"> protected void runit_Click(object sender, EventArgs e) { //SqlDataSource ID = "InsertExtraInfo".Insert(); //SqlDataSource1.Insert(); } protected void Button1_Click1(object sender, EventArgs e) { SqlDataSource newsql; newsql.InsertParameters.Add("@name", "Dan"); newsql.InsertParameters.Add("@color", "rose"); String t_c = "purple"; string tempname = Page.User.Identity.Name; Label1.Text = tempname; Label2.Text = t_c; newsql.Insert(); }</script><html xmlns="http://www.w3.org/1999/xhtml" ><head runat="server"> <title>mini update</title></head><body> <form id="form1" runat="server"> name<asp:TextBox ID="name" runat="server" OnTextChanged="TextBox2_TextChanged"></asp:TextBox><br /> color <asp:TextBox ID="color" runat="server"></asp:TextBox><br /> <br /> <asp:Button ID="Button1" runat="server" OnClick="Button1_Click1" Text="Button" /> <br /> set lable =><asp:Label ID="Label1" runat="server" Text="Label" Width="135px" Visible="False"></asp:Label><br /> Lable 2 => <asp:Label ID="Label2" runat="server" Text="Label"></asp:Label><br /> Usernmae=><asp:LoginName ID="LoginName1" runat="server" /> <br /> <br /> <br /> <br /> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConflictDetection="CompareAllValues" ConnectionString="<%$ ConnectionStrings:newstring %>" DeleteCommand="DELETE FROM [favcolor] WHERE [name] = @original_name AND [color] = @original_color" InsertCommand="INSERT INTO [favcolor] ([name], [color]) VALUES (@name, @color)" OldValuesParameterFormatString="original_{0}" SelectCommand="SELECT [name], [color] FROM [favcolor]" UpdateCommand="UPDATE [favcolor] SET [color] = @color WHERE [name] = @original_name AND [color] = @original_color"> <DeleteParameters> <asp:Parameter Name="original_name" Type="String" /> <asp:Parameter Name="original_color" Type="String" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="color" Type="String" /> <asp:Parameter Name="original_name" Type="String" /> <asp:Parameter Name="original_color" Type="String" /> </UpdateParameters> <InsertParameters> <asp:InsertParameter("@name", "Dan", Type="String" /> <asp:InsertParameter("@color", "rose") Type="String"/> </InsertParameters> </asp:SqlDataSource> <asp:GridView ID="GridView1" runat="server" AllowPaging="True" AllowSorting="True" AutoGenerateColumns="False" DataKeyNames="name" DataSourceID="SqlDataSource1"> <Columns> <asp:CommandField ShowDeleteButton="True" ShowEditButton="True" ShowSelectButton="True" /> <asp:BoundField DataField="color" HeaderText="color" SortExpression="color" /> <asp:BoundField DataField="name" HeaderText="name" ReadOnly="True" SortExpression="name" /> </Columns> </asp:GridView> </form></body></html>
View Replies !
Is It Possible To Use Twice Declared. Variable Names- KILL And After Declared. Variable
is it possible to use twice declared. Variable names- declared. Variable and after KILL and use the same declared. Variable like DECLARE @StartDate datetime KILL @StartDate datetime (remove from memory) use after with the same name i have 2 big stored PROCEDURE i need to put one after one and psss only 1 Variable name to the second stored PROCEDURE like this i don't get this error The variable name '@Start_Date' has already been declared. Variable names must be unique within a query batch or stored procedure. Msg 134, Level 15, State 1, Line 146 The variable name '@End_Date' has already been declared. Variable names must be unique within a query batch or stored procedure. i use like KILL @endDate ?? KILL @StartDate ?? TNX
View Replies !
Help With A WHERE Clause
I have an insert statement that reads: SELECT AppointmentID, PatientNo, PatientSurname, PatientForename, ConsultantName, HospitalName, Date, CONVERT (varchar, Time, 8), AppointmentStatus FROM [Appointment] WHERE ([AppointmentId] = @AppointmentId) I also need to add another WHERE clause. This clause will mean that if the date is within 14 days of the actual date it will not ba able to be selected need help writing this not sure how to write it Thanks in advance Mike.
View Replies !
Sql Where Clause - Help
Hey guys, I'm a bit weak when it comes to doing ands and or's. I know what i want, but when I put it into statement, i dont get the results that i want. I have 3 fields in my where clause. ID, LW, and LWU. The code is as follows:WHERE (LASTVISIT BETWEEN '1 / 1 / 95 12 : 00 : 00 AM' AND '1 / 1 / 06 12 : 00 : 00 AM') AND (ID NOT LIKE '%6%') AND (ID NOT LIKE '%7%') AND (ID NOT LIKE '%8%') AND (LW <> 1) AND (LWU <> 'test') OR (LASTVISIT BETWEEN '1 / 1 / 95 12 : 00 : 00 AM' AND '1 / 1 / 06 12 : 00 : 00 AM') AND (ID IS NULL) AND (LW <> 1) AND (LWU <> 'test') I have a range of dates that I want to grab, in there I do not want any records where ID has 6,7,8 and I only want records where LW does not equal 1. UP to this point, it works fine. I get all the records that only return these values. However, the moment I add where LWU does not equal 'test'. it does not return the values I want. Furthermore, why can I not put this whole string into one and clause? I never understood why I had to create a second line following OR. the longer this query gets the more I get confused. Any help?
View Replies !
Like Clause
I'm trying to do a simple ... SELECT ... FROM .... WHERE ... LIKE clause and i think my syntax is off. WHile using sql server ...... is the syntax Where Name LIKE '%variable%' ?????? Or should I be using something differnent. Thank you in advance for any help.
View Replies !
IN Clause
hi alli need to create a sql statement that receives some values - my doubt is only about how to build that sql statementi've heard something about IN clause but could not apply it - could someone give any sample?First page: I have a textbox with some emails e.g. a@a.com, b@b.com, c@c.com etcSecond page: SELECT * FROM Table1 WHERE Field = ... IN ???thanks in advance
View Replies !
|
TRACKER
