Using Inserted / Deleted Tables With Text / NText / Image Data Type

The Text, Ntext, And Image Data Types Are Invalid - Error
Hi ,
When I run the following SQL :
strQuery = "DECLARE @V_PRGTXT VARCHAR(8000); "; strQuery += "SELECT @V_PRGTXT = (SELECT PROGTXT FROM PSPCMPROG WHERE OBJECTID1 = 10 AND OBJECTVALUE1 = 'FISC_TEMPLATE_PNLG' AND OBJECTID2 = 39 AND OBJECTVALUE2 = 'GBL' AND OBJECTID3 = 12 AND OBJECTVALUE3 = 'SavePostChange' AND OBJECTID4 = 0 AND OBJECTVALUE4 = ' ' AND OBJECTID5 = 0 AND OBJECTVALUE5 = ' ' AND OBJECTID6 = 0 AND OBJECTVALUE6 = ' ' AND OBJECTID7 = 0 AND OBJECTVALUE7 = ' ')";
m_databaseConnector.execUpdate(strQuery);
strQuery = "UPDATE PSPCMPROG SET PROGTXT = @V_PRGTXT WHERE OBJECTID1 = 10 AND OBJECTVALUE1 = '" + component + "' ";

strQuery += "AND OBJECTID2 = 39 AND OBJECTVALUE2 = 'GBL' AND OBJECTID3 = 12 AND OBJECTVALUE3 = 'SavePostChange' AND OBJECTID4 = 0 AND OBJECTVALUE4 = ' ' AND OBJECTID5 = 0 AND OBJECTVALUE5 = ' ' AND OBJECTID6 = 0 AND OBJECTVALUE6 = ' ' AND OBJECTID7 = 0 AND OBJECTVALUE7 = ' '";
m_databaseConnector.execUpdate(strQuery);

I'm getting the following error:
The text, ntext, and image data types are invalid in this subquery or aggregate expression.

Can you please help me how to fix this?

Regards,
Chandra.

View Replies !

---

Text Data Type From Deleted Table (trigger)
Hi,

I need to prevent modification/update to a field.

So I created a trigger. To take the data from DELETED table then replace the field data.

However, I have problem with one field which data type is text.

MS SQL always return me this error:
Cannot use text, ntext, or image columns in the 'inserted' and 'deleted' tables.

I use the following code to take the data from deleted table

DECLARE @ptrval varbinary(16)
SELECT @ptrval = TEXTPTR(NOTES )
FROM DELETED

I also tried simple Select statement
Select notes from deleted

What code should I use to take the deleted data

Please help.

Thanks in advance

View Replies !

---

How To Convert To Regular Text, Data Stored In Image Data Type Field ????
Hi,This is driving me nuts, I have a table that stores notes regarding anoperation in an IMAGE data type field in MS SQL Server 2000.I can read and write no problem using Access using the StrConv function andI can Update the field correctly in T-SQL using:DECLARE @ptrval varbinary(16)SELECT @ptrval = TEXTPTR(BITS_data)FROM mytable_BINARY WHERE ID = 'RB215'WRITETEXT OPERATION_BINARY.BITS @ptrval 'My notes for this operation'However, I just can not seem to be able to convert back to text theinformation once it is stored using T-SQL.My selects keep returning bin data.How to do this! Thanks for your help.SD

View Replies !

---

How To Set Up Search On Text Stored In An Image Type Of Data?
I am saving large text document in an image type of column in a SQL Server 2000 table.
How will I set up searching of words/ phrases for data stored in this column?

View Replies !

---

Inserted And Deleted Temp Tables ??
I want to know how inserted and deleted temp tables in SQL server work. My question is more regarding how they work when multiple users accessing the same database. Suppose two users update the database at the same time. In that case what are the values stored in the inserted and deleted tables.

I have a trigger that records changes to the database as in an audit trail. Like any other audit trail I insert data into my audit table from the inserted and deleted temp tables in MS SQL Server. I however am not clear as to how these inserted and deleted tables store values when two users update the database at the same time. Are there separate inserted and deleted tables for each session. The users access the database thru ASP pages.

The audit trail I am trying to use is http://www.nigelrivett.net/AuditTrailTrigger.html

I actually would like to store the inserted and deleted temp tables into other temporary tables so that I can access these tables thru a stored procedure. This is when the problem of same users updating the temporary tables is more pronounced.

Thanks in advance.

View Replies !

---

Triggers-Inserted/Deleted Tables
I am reading the WROX "Professional SQL Server 7 Programming" book.
The following code appears on page 424:

CREATE TRIGGER ProductIsRationed
ON Products
FOR UPDATE
AS
IF EXISTS
(
SELECT 'True'
FROM Inserted i
JOIN Deleted d
ON i.ProductID = d.ProductID
WHERE (d.UnitsInStock - i.UnitsInStock) > d.UnitsInStock / 2
AND d.UnitsInStock - i.UnitsInStock > 0
)
BEGIN
RAISERROR('Cannot reduce stock by more than 50%% at once.',16,1)
ROLLBACK TRAN
END

The trigger fires when an UPDATE is made to Products table. The author states that the Inserted and Deleted tables only exist for the life of the trigger, not before, and not after the trigger runs. If this is true, then why would there be any rows in the Deleted table in this case? No rows were
deleted within the trigger. As far as I can see, no rows have been updated
either. If the condition does exist, no rows will be updated, and an error will be displayed. Otherwise, the row will be updated. Then there would be a row in the inserted table. But then the trigger is finished and the inserted table for that trigger disappears. I think my logic is flawed, which is why I am writing. I don't think I fully understand the Inserted and Deleted tables.

Any help would be greatly appreciated.
Nathan

View Replies !

---

Inserted/Deleted Trigger Tables In SP
SQL 7 SP2

Are the tables inserted and deleted available from within a sp which is called from a trigger ?

Craig

View Replies !

---

DML Triggers - INSERTED && DELETED Tables
 

I'm know the above tables are system generated, am I right in assuming the following.

1) The tables are unique to the current user.

2) The tables only last as long as the transaction that caused their creation
 
Thanks in advance
 
Alex

View Replies !

---

Relationship Between Inserted And Deleted Tables?
Hi all,
 
I just ran across an issue on a SQL 2000 sp4 db where RI was being maintained solely with triggers. I am attempting to change the primary key of a parent table and cascade the results to all its children without using the vendor-supplied trigger code (long story...) using an INSTEAD OF trigger.
 
My question is:  does SQL Server create any kind of relationship between the inserted and deleted tables that I could exploit since the key field is unavailable?
 
I am trying to avoid having to add a surrogate key to each of the children just for this activity (as there are many M rows in each and no other suitable unique column combinations that span all the child tables).
 
-DC

 
 

View Replies !

---

Trigger Problem With "inserted" And "deleted" On Text Field
I use SQL Server 6.5
I have create a trigger on UPDATE for history.
This history send the old value and the new value in a table to follow all the modifications. Those values are "text datatype".
When I execute the trigger (When I make a modification in the table), the two values are the same (the new value).
If somone have a idea ...

CREATE TABLE dbo.HELPDB (
ALMID int NOT NULL ,
MEMO text NULL ,
FIRSTAID text NULL
)
GO

CREATE TRIGGER trg_UpdateHelpDB ON dbo.HELPDB
FOR UPDATE
AS
DECLARE @Id integer
DECLARE @alm integer
DECLARE @user varchar(20)
DECLARE @almname varchar(24)
DECLARE @usergroupproprid integer
DECLARE @usergroupproprname varchar(30)
DECLARE @oldFirstAid varchar(255)
DECLARE @newFirstAid varchar(255)

if(UPDATE(FIRSTAID))
begin
select @alm = ALMID, @oldFirstAid = CONVERT(varchar(255), FIRSTAID) from deleted
select @newFirstAid = CONVERT(varchar(255), FIRSTAID) from inserted
Exec AMX.dbo.SpGetNewId 'HISTALM', @Id OUTPUT
select @user = "testuser"
select @almname = "testalmname"
select @usergroupproprname = "testusergroupproprname"
INSERT HISTALM (ID, ALMID, DATETIME, USERLOG, STATUS, ALMNAME, USERGRPPROPR,USERGRPOWNER, EVENTTYPE, OLDVALUE, NEWVALUE)
VALUES(@Id, @alm, getdate(), @user, "First Aid", @almname, @usergroupproprname, "/", 0, @oldFirstAid, @newFirstAid)
END
GO

CREATE TABLE dbo.HISTALM (
ID int NOT NULL ,
ALMID int NOT NULL ,
DATETIME datetime NOT NULL ,
USERLOG varchar (30) NOT NULL ,
STATUS varchar (25) NOT NULL ,
ALMNAME varchar (24) NOT NULL ,
USERGRPPROPR varchar (30) NOT NULL ,
USERGRPOWNER varchar (30) NOT NULL ,
EVENTTYPE int NOT NULL ,
OLDVALUE varchar (255) NULL ,
NEWVALUE varchar (255) NULL
)
GO

View Replies !

---

Move Text Data (not A File) Into An Image Data Type
 

The ERP manufacturer used an image data type to store large text data fields. I am trying to move these data types from one database to another database using either Sql Queries or MS Access. I can cast them as an 8000 char varchar to read them directly but have no luck importing into these image data fields.
 
Access and Crystal are not able to read these fields directly.
 
Any suggestions? Most information about these fields has to do with loading files but I am just moving data.
 
Thanks,
 
Ray
 

View Replies !

---

Table Scan On Inserted And Deleted Tables?
Hello,

I have a stored procedure that's running a little slower than I would like. I've executed the stored proc in QA and looked at the execution plan and it looks like the problem is in a trigger on one of the updated tables. The update on this table is affecting one row (I've specified the entire unique primary key, so I know this to be the case). Within my trigger there is some code to save an audit trail of the data. One of these statements does an update of the history table based on the inserted and deleted tables. For some reason this is taking 11.89% of the batch cost (MUCH more than any other statement) and within this statement 50% of the cost is for a table scan on inserted and 50% is for a table scan on deleted. These pseudo-tables should only contain one record each though.

Any ideas why this would be causing such a problem? I've included a simplified version of the update below. The "or" statements actually continue for all columns in the table. The same trigger template is used for all tables in the database and none of the others seem to exhibit this behavior as far as I can tell.

Thanks for any help!
-Tom.

UPDATE H_MyTable
SET HIST_END_DT = @tran_date
FROM H_MyTable his
INNER JOIN deleted del ON (his.PrimaryKey1 = del.PrimaryKey1) and
(his.PrimaryKey2 = del.PrimaryKey2)
INNER JOIN inserted ins ON (his.PrimaryKey1 = ins.PrimaryKey1) and
(his.PrimaryKey2 = ins.PrimaryKey2)
WHERE (his.HIST_END_DT is null)
and ((IsNull(del.PrimaryKey1, -918273645) <>
IsNull(ins.PrimaryKey1, -918273645)) or
(IsNull(del.PrimaryKey2, -918273645) <>
IsNull(ins.PrimaryKey2, -918273645)) or
(IsNull(del.Column3, -918273645) <>
IsNull(ins.Column3, -918273645)))

View Replies !

---

Triggers - How Do You Join INSERTED Vs DELETED Tables?
I want to compare the before and after values of an UPDATEd column using a trigger. I want to know if the value in the column has changed. Simple? No!

As you know, SqlServer puts the before image of the UPDATEd rows into the DELETED virtual table and the after image of the UPDATEd rows in the INSERTED virtual table.

So you would get the before and after data by doing a SELECT on these tables.
But here is the problem - how do you join the tables? What if there are >1 rows in these 2 tables (because the UPDATE affected >1 rows) - how do i know which "old"/DELETED rows correspond to which "new"/INSERTED?"
Ok - I could join the 2 tables on the primary key, but what if the primary key was updated? In that case the join would not work - the DELETED table would contain the old primary key value and the INSERTED table would contain the new (different) primary key value. In fact, ALL of the columns may have been changed by the UPDATE.

Now, there is another thing to try with triggers - the
IF UPDATE ( <columname> )
test. This is designed to tell you if a specified column was UPDATEd by the last UPDATE. However, this will return TRUE for any UPDATE that mentions the column - even if the UPDATE does not change any data! So I cannot determine whether a certain column has had its value changed with this either.

So then you can try another test mentioned in the docs for CREATE TRIGGER - the
IF COLUMNS_UPDATED()
test. However, this will report that a column has been updated, NOT whether the data has changed as aresult of that UPDATE.
So if you UPDATE the value in the column to the same value as it was beforehand (admittedly, a pointless thing to do, but it could happen in some apps), this fuction will say, yes, this column was updated.

So my question remains - how do I know if the data has changed in a column after an UPDATE, using a trigger?
Any ideas?

View Replies !

---

Problem With My Trigger(inserted/deleted-tables)
 

I dont know what I am doing wrong. The trigger (see below) is doing what I want it to do when I do this:

 
INSERT INTO dbo.personal

(personal_id, chef_id,fornamn, efternamn)

VALUES

(40, 100, 'Malin', 'Markusson' , 'Boss')
 

 
but when I remove one value, the result in the logtable is NULL:

 

INSERT INTO dbo.personal
(personal_id, chef_id,fornamn, efternamn)

VALUES

(40, 100, 'Malin', 'Markusson' )
 
How can I change the trigger so that it will give me the information of the values that have been updated, inserted or deleted when I dontchange all values (just a couple of them)? 

 
My trigger:
CREATE Trigger trigex

ON dbo.personal

FOR insert, update,delete

AS

INSERT INTO logtable (Innan_värde, Ny_värde)

SELECT

rtrim(cast(d.personal_id as varchar)+', '+cast(d.chef_id as varchar)+', '+rtrim(d.efternamn)+', '+ rtrim(d.fornamn)+ ', '+ rtrim(d.titel)),

(cast(i.personal_id as varchar)+', '+cast(i.chef_id as varchar)+', '+rtrim(i.efternamn)+', '+ rtrim(i.fornamn)+ ' '+ rtrim(i.titel))

FROM inserted i full join deleted d on i.personal_id = d.personal_id

 
My table:
CREATE Table logtable

(Innan_värde varbinary(max),

Ny_värde varbinary(max))

 

 

 
Thank you !

View Replies !

---

Inserting Data Into Text Or Image Data Type
Hi all,
Pls tell me how to insert large data into text or image data type of MS SQL Server using Java.

Waiting for reply.........

View Replies !

---

What Is The User Of Inserted And Deleted Tables In Sql Server 2005
can anybody tell me with an example how to use Inserted and Deleted in Sql Server 2005

View Replies !

---

Order Of Records In The INSERTED/DELETED Tables In A Trigger
We have an app that uses triggers for auditing.  Is there a way to know the order that the records were inserted or deleted?  Or maybe a clearer question is....  Can the trigger figure out if it was invoked for a transaction that "inserted and then deleted" a record versus "deleted and then inserted" a record?  The order of these is important to our auding.

Thanks!
CB

View Replies !

---

Order Of Rows In The Inserted And Deleted Psuedo Tables
I have a table that sometimes has modifications to column(s) comprising the primary key [usually "end_date"].  I need to audit changes on this table, and naturally, turned to after triggers.
 
The problem is that for updates, when the primary key composition changes, I'm not able to relate/join using the primary key - obviously, it no longer matches across INSERTED and DELETED.  Now, for a single row update, it's easy to check for updates on PK columns and then deduce what changes were made...
 
So the real question is:  are rows in INSERTED and DELETED always in matching order (1st row in INSERTED corresponds to the 1st row in DELETED...)?
 
 
 
I don't want to put a surrogate key (GUID nor IDENTITY) on the base table if at all possible.  INSERT... SELECT from the inserted/deleted tables into a temp table with identity column is fine, and is what I'm currently doing; I would like MVP or product engineer level confirmation that my ordering assumption is correct.
 
Testing using an identity surrogate key on base table, and selecting from the Ins/del tables, and the temp tables without an order by clause seems to always return in proper order (proper for my purposes).  I've tested under SQL 2005 RTM, SP1, SP2, and SP2 "3152".
 
FYI, I've lost the debate that such auditing is better handled by the application, not the database server...
 
Aside:  why doesn't the ROW_NUMBER() function allow an empty OVER( ORDER BY() ) clause?  Will SQL ever expose an internal row_id, at least in the pseudo tables, so we can work around this situation?
 
Thanks
Mike
 
 

View Replies !

---

Replicate Ntext Text Image In Transaction Replication
Hi!

i have a problem with my replication.

I have two SQL 2005 SP2 Server and want to use the transaction replication with updateable subscriber. Now the problem is that i can do any changes on the master server. But if i want to change a record on the subscriber which contains a ntext, text, oder image column - then i geht the error that the field will be NULL on the master.

 

Is there any solution to fix this problem? I dont wan`t to change the datatype vom ntext to varchar(max) !!

 

greetings

Holger

View Replies !

---

Text, Ntext, Or Image Node Does Not Exist Error
Hai Friends...

I am using sql server 2000. i have one table with columns

empid notnull
empfname not null
empmname null
emplname not null

while i am writing a simple procedure to get the employee middel name(empmname) it is giving the error message like this


Server: Msg 7105, Level 22, State 6, Procedure emp_statistics, Line 11
Page (1:70), slot 18 for text, ntext, or image node does not exist.

Connection Broken



plase help me Urgent

Thanks and Regards

Krishna Mangamuri

View Replies !

---

SQL ERROR - I Need DISTINCT But Can Use It With Image,ntext, Text - How To Work Aroud???
SQL ERROR - I need DISTINCT but can use it with image,ntext, text - How To work around???  ! more - How to Work around - MIN() I cant use it when having text in SELECT statement  The text, ntext, or image data type cannot be selected as DISTINCT.



Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.

Exception Details: System.Data.SqlClient.SqlException: The text, ntext, or image data type cannot be selected as DISTINCT.

Source Error:





An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of
the exception can be identified using the exception stack trace below. 

View Replies !

---

Clipping Data Inserted Into NText Field
I'm having a major problem. I'm executing an sql statement to insert data into an nText field. It's clipping the text though. I haven't seen any patterns yet. Example "Welcome to the show.", it would save "Welcome to t". And it's not all the time. Please Help.

Thanks for your time,
Randy

View Replies !

---

Page (1:404399), Slot 5 For Text, Ntext, Or Image Node Does Not Exist.
I wonder if anyone can help.

I do not understand the error message but I do know it is associated with a specific table and one of its indexes. If I try to drop the index that is the error message I get.

I have copied the data from the table to a new table and rebuilt the indexes on the new table and everything is working fine.

The bad table is now renamed to myTable_BAD. I now want to delete it but can't as everytime I enter
drop table myTable_BAD

I get Page (1:404399), slot 5 for text, ntext, or image node does not exist.

So here is my question

How can I delete this Bad table?

View Replies !

---

NText Data Type
I need to store a large amount of text in my database. I thought I was supposed to use the nText data type for storing a large amount of text. For some reason all my text always gets truncated after 256 characters.
How come you can only store 256 characters in an nText? What field should I use to store large amounts of text?
Thanks.

View Replies !

---

Managing Ntext, Text With A Long Text Data
Hi,I have a problem to insert(update) a long text (more than 64K) intoSQL 2000 (datatype - 'text'). It cuts the data and insert only 64K.MSDN says: "When the ntext, text, and image data values get larger,however, they must be handled on a block-by-block basis. BothTransact-SQL and the database APIs contain functions that allow applications towork with ntext, text, and image data block by block." Could somebodygive me an example how to do this, please.Thank you

View Replies !

---

Ntext Data Type In SQL Server
Hi! ALL
I 'm writing an ASP.NET Application(1.1) , but i 've problem. I used ntext data type to store my data as follows
"Ä?ể sá»­ dụng các dịch vụ của VUNGOIMORA.COM bạn phải Ä‘á»?c kỹ các thông tin quy định và phải tuân thủ các Ä‘iá»?u quy định sau:

V� thông tin đăng ký thành viên:

Ä?ể có thể đăng ký làm thành viên của Vungoimora.com, bạn phải trên 18 tuổi và có đủ năng lá»±c để chịu má»?i trách nhiệm đối vá»›i má»?i hành vi của mình.
Bạn phải cung cấp đầy đủ, đúng và trung thá»±c các thông tin yêu cầu trong phần đăng ký thành viên(Há»? tên, Ä?ịa chỉ, Ä?iện thoại, Email….)
Mỗi tài khoản chỉ được đăng ký một lần và được kiểm tra sự chính xác qua cơ chế chứng thực bằng cách chúng tôi sẽ gửi mail chứng thực tới địa chỉ Email mà bạn đã đăng ký
Sẽ có 3 dạng thành viên trên VUNGOIMORA.COM: thành viên bình thư�ng(miễn phí), thành viên VIP(thành viên đóng phí), thành viên là chủ sở hữu eStore.
V� Tin đăng của bạn:

Các tin đăng(mua, bán, cho thuê, cần thuê, giới thiệu) phải đúng danh mục như thế ngư�i khác sẽ dễ dàng tìm thấy tin đăng của bạn hơn.
Các tin đăng phải trung thực chính xác, không viết toàn chữ HOA, không mang tính chất phá hoại làm ảnh hưởng tới ngư�i khác hoặc doanh nghiệp khác.
Nội dung thông tin không được mang tính chính trị, không mang tính tôn giáo, không được trái với phong tục tập quán của Việt Nam, không được dùng l�i lẽ thô tục, thông tin không được mang tính đe d�a, hay khiêu khích.
Không được đăng tin liên quan đến các thiết bị vũ khí, khiêu dâm, tin tặc...không được đăng tin quảng cáo hay rao bán những hàng hóa mà Nhà Nước Việt Nam cấm.
Những thông tin được đưa trên Vungoimora.com chỉ để giúp các bên mua - bán liên lạc với nhau, Vungoimora.com không can thiệp vào việc chuyển nhượng giữa các bên và không chịu trách nhiệm nếu xảy ra các vấn đ� pháp lý giữa các bên (VD: lừa đảo, cướp, trấn lột...). Vungoimora.com không có trách nhiệm bảo đảm tính chính xác, chất lượng, danh mục, tính thích hợp, hay tiêu chuẩn của hàng hoá. Bạn sử dụng dịch vụ Vungoimora.com miễn phí là đang tự nguyện chấp nhận rủi ro nếu có, chúng tôi không chịu bất cứ trách nhiệm nào v� việc các bên lợi dụng dịch vụ trên Vungoimora.com để tiến hành các hành vi xấu. Tuy nhiên, chúng tôi cố gắng hết sức để đảm bảo tính trung thực của các thông tin đưa lên Vungoimora.com để giảm thiểu rủi ro cho ngư�i dùng dịch vụ. Chúng tôi dành quy�n khước từ hay chấm dứt những dịch vụ cung cấp vào bất cứ lúc nào cho ngư�i dùng nào đó mà không cần báo trước.
Tin rao của bạn có thể bị xóa mà không cần thông báo.
Tin đăng trên Vungoimora.com là miá»…n phí, trong trÆ°á»?ng hợp bạn muốn tin đăng của bạn xuất hiện tại các vị trí đặc biệt của website Vungoimora.com hay có thêm má»™t số chức năng đặc biệt, chúng tôi sẽ thu má»™t khoản phí, bạn  có thể xem thông tin chi tiết tại đây.
Các đi�u cần lưu ý khác:

Vungoimora.com không chịu trách nhiệm đối với m�i nội dung và thông tin mà các thành viên đăng trên web site, cũng như những liên kết từ vungoimora.com ra bên ngoài
Vungoimora.com có thể sẽ gửi email đến cho bạn theo một chu kỳ nhất định. Những email này không thể xem là spam.
Vungoimora.com không chịu bất cứ trách nhiệm nào trong trÆ°á»?ng hợp máy chủ web bị hÆ°, bị tấn công hoặc phá hoại  hoặc do bất cứ lý do nào làm tin đăng hay account của bạn bị mất nhÆ°ng Chúng tôi sẽ cố gắng khắc phục vá»›i khả năng tốt nhất của mình.
Không được cố ý thâm nhập tài kh�an hày sử dụng tài khoản của ngư�i khác khi chưa có sự đồng ý của h�.
Vungoimora.com có toàn quy�n thay đổi nội dung quy định này vào bất lúc nào mà không cần phải thông báo , cũng như không cần phải giải thích lý do thay đổi.
Chúng tôi cũng có quy�n thay đổi nội dung web site Vungoimora.com bất kỳ lúc nào mà không cần báo trước. Chúng tôi dành quy�n thay đổi hay cập nhật những đi�u khoản có trong bản thoả thuận sử dụng dịch vụ này. Các bạn có trách nhiệm phải thư�ng xuyên xem xét và cập nhật những thay đổi này.
Bạn có trách nhiệm bảo vệ tài kh�an của bạn trên Vungoimora.com, thư�ng xuyên thay đổi mật khẩu và chịu trách nhiệm v� các h�at động của tài kh�an do mình sở hữu.
Nếu thành viên nào đó vi phạm 1 hay nhi�u quy định ở trên thì tài khoản của thành viên đó sẽ bị xoá mà không cần báo.
Nếu bạn Ä‘ang đồng ý tất cả các Ä‘á»?u khoản trên,  hãy chá»?n "Tôi Ä?ồng ý" để tiến hành đăng ký thành viên.
Xin cảm ơn!"
 
but when display data, it displays as follows
 
" �? s? d?ng các d?ch v? c?a VUNGOIMORA.COM b?n ph?i d?c k? các thông tin quy d?nh và ph?i tuân th? các di?u quy d?nh sau:

V? thông tin dang ký thành viên :

�? có th? dang ký làm thành viên c?a Vungoimora.com, b?n ph?i trên 18 tu?i và có d? nang l?c d? ch?u m?i trách nhi?m d?i v?i m?i hành vi c?a mình.
B?n ph?i cung c?p d?y d?, dúng và trung th?c các thông tin yêu c?u trong ph?n dang ký thành viên(H? tên, �?a ch?, �i?n tho?i, Email….)
M?i tài kho?n ch? du?c dang ký m?t l?n và du?c ki?m tra s? chính xác qua co ch? ch?ng th?c b?ng cách chúng tôi s? g?i mail ch?ng th?c t?i d?a ch? Email mà b?n dã dang ký
S? có 3 d?ng thành viên trên VUNGOIMORA.COM: thành viên bình thu?ng(mi?n phí), thành viên VIP(thành viên dóng phí), thành viên là ch? s? h?u eStore.
V? Tin dang c?a b?n :

Các tin dang(mua, bán, cho thuê, c?n thuê, gi?i thi?u) ph?i dúng danh m?c nhu th? ngu?i khác s? d? dàng tìm th?y tin dang c?a b?n hon.
Các tin dang ph?i trung th?c chính xác, không vi?t toàn ch? HOA, không mang tính ch?t phá ho?i làm ?nh hu?ng t?i ngu?i khác ho?c doanh nghi?p khác.
N?i dung thông tin không du?c mang tính chính tr?, không mang tính tôn giáo, không du?c trái v?i phong t?c t?p quán c?a Vi?t Nam, không du?c dùng l?i l? thô t?c, thông tin không du?c mang tính de d?a, hay khiêu khích.
Không du?c dang tin liên quan d?n các thi?t b? vu khí, khiêu dâm, tin t?c...không du?c dang tin qu?ng cáo hay rao bán nh?ng hàng hóa mà Nhà Nu?c Vi?t Nam c?m.
Nh?ng thông tin du?c dua trên Vungoimora.com ch? d? giúp các bên mua - bán liên l?c v?i nhau, Vungoimora.com không can thi?p vào vi?c chuy?n nhu?ng gi?a các bên và không ch?u trách nhi?m n?u x?y ra các v?n d? pháp lý gi?a các bên (VD: l?a d?o, cu?p, tr?n l?t...). Vungoimora.com không có trách nhi?m b?o d?m tính chính xác, ch?t lu?ng, danh m?c, tính thích h?p, hay tiêu chu?n c?a hàng hoá. B?n s? d?ng d?ch v? Vungoimora.com mi?n phí là dang t? nguy?n ch?p nh?n r?i ro n?u có, chúng tôi không ch?u b?t c? trách nhi?m nào v? vi?c các bên l?i d?ng d?ch v? trên Vungoimora.com d? ti?n hành các hành vi x?u. Tuy nhiên, chúng tôi c? g?ng h?t s?c d? d?m b?o tính trung th?c c?a các thông tin dua lên Vungoimora.com d? gi?m thi?u r?i ro cho ngu?i dùng d?ch v?. Chúng tôi dành quy?n khu?c t? hay ch?m d?t nh?ng d?ch v? cung c?p vào b?t c? lúc nào cho ngu?i dùng nào dó mà không c?n báo tru?c.
Tin rao c?a b?n có th? b? xóa mà không c?n thông báo.
Tin dang trên Vungoimora.com là mi?n phí, trong tru?ng h?p b?n mu?n tin dang c?a b?n xu?t hi?n t?i các v? trí d?c bi?t c?a website Vungoimora.com hay có thêm m?t s? ch?c nang d?c bi?t, chúng tôi s? thu m?t kho?n phí, b?n  có th? xem thông tin chi ti?t t?i dây.
Các di?u c?n luu ý khác :

Vungoimora.com không ch?u trách nhi?m d?i v?i m?i n?i dung và thông tin mà các thành viên dang trên web site, cung nhu nh?ng liên k?t t? vungoimora.com ra bên ngoài
Vungoimora.com có th? s? g?i email d?n cho b?n theo m?t chu k? nh?t d?nh. Nh?ng email này không th? xem là spam.
Vungoimora.com không ch?u b?t c? trách nhi?m nào trong tru?ng h?p máy ch? web b? hu, b? t?n công ho?c phá ho?i  ho?c do b?t c? lý do nào làm tin dang hay account c?a b?n b? m?t nhung Chúng tôi s? c? g?ng kh?c ph?c v?i kh? nang t?t nh?t c?a mình.
Không du?c c? ý thâm nh?p tài kh?an hày s? d?ng tài kho?n c?a ngu?i khác khi chua có s? d?ng ý c?a h?.
Vungoimora.com có toàn quy?n thay d?i n?i dung quy d?nh này vào b?t lúc nào mà không c?n ph?i thông báo , cung nhu không c?n ph?i gi?i thích lý do thay d?i.
Chúng tôi cung có quy?n thay d?i n?i dung web site Vungoimora.com b?t k? lúc nào mà không c?n báo tru?c. Chúng tôi dành quy?n thay d?i hay c?p nh?t nh?ng di?u kho?n có trong b?n tho? thu?n s? d?ng d?ch v? này. Các b?n có trách nhi?m ph?i thu?ng xuyên xem xét và c?p nh?t nh?ng thay d?i này.
B?n có trách nhi?m b?o v? tài kh?an c?a b?n trên Vungoimora.com, thu?ng xuyên thay d?i m?t kh?u và ch?u trách nhi?m v? các h?at d?ng c?a tài kh?an do mình s? h?u.
N?u thành viên nào dó vi ph?m 1 hay nhi?u quy d?nh ? trên thì tài kho?n c?a thành viên dó s? b? xoá mà không c?n báo.
N?u b?n dang d?ng ý t?t c? các d?u kho?n trên,  hãy ch?n "Tôi Ã??ng ý" d? ti?n hành dang ký thành viên.
Xin c?m on! "
 
please, let me know the solution for this problem. Thanks,

View Replies !

---

NText Data Type Issue
Have a table storing nText data tied into a Cold Fusion front end. The Cold Fusion returns the values fine, but when querying in Query analyzer the messages are being truncated. In Enterprize Manager I get a <Long Text> message.

I ran OBJECTPROPERTY and found that TableTextInRowLimit was set to 0, but even after i set it to 1 on our test system with a value of 2000, it still truncated.

Also, the field is set to ntext with a length of 16. I havent worked much with nText, anyone with advise would be much appricated.

Late
Matt

View Replies !

---

Replace() On Data Type Ntext - How To?
Hello guys,

I would like to execute a t-sql query and replace a string by another in all records.

I did this :

UPDATE myTable
SET myColumn = replace(myColumn,'old string','new string')

The error I get is :
Argument data type ntext is invalid for argument 1 of replace function.

Thank you very much for any help!

Regards,
Fabian

my favorit hoster is ASPnix : www.aspnix.com !

View Replies !

---

Report Builder - Read Data From SQL Server With Ntext Data Type
Hi all,
 
I have a column in SQL server which is of type ntext. Selecting the specific column to view it in report builder, an error message appears with the following description:
 
- Cannot run this report. The grouping expression 'nameofcolumn' returns the datatype binary. The Grouping Expression cannot return binary data.
 
Report Builder recognises this as if it was an image...
 
Thanks in advance!

View Replies !

---

Problem Using Ntext Data Type In OPENXML
Hi,I've got problems using ntext data in a stored procedure (SQL-Server2000):create procedure testproc@xmldata ntextasdeclare @Paramntextexec sp_xml_preparedocument @idoc OUTPUT, @xmldataselect @Param=Paramfrom openxml(@idoc, '//ROOT/Parameters')with (Paramntext)But if I pass "Param" I'll receive an internal error. If "Param" and"@Param" are declared as "varchar(2000)" everything works fine.Any hints?xpost & f'up

View Replies !

---

Ntext Data Type Cannot Be Selected As DISTINCT
Hello,
When I am using DISTINCT in the SELECT clause for a table having a column of datatype "ntext" in SQL 2000 as well SQL 2005, it fails giving the error as "ntext data type cannot be selected as DISTINCT". This is coz
"The text, ntext, or image data type cannot be selected as DISTINCT."

But I am able to insert into a temporary table having a column whose datatype is nvarchar) using this SELECT clause in SQL 2000. Please advice me how this happens. If I am not worng, implicit conversion has happened. But this insert fails raising the same error in SQL 2005. Please help me to find the difference
thanks in advance!

View Replies !

---

Inserted The Image In A Column----how Can I View The Image
hi,i have inserted the image present in mydocuments using alter commandcreate table aa(a int, d image)insert into aa values (1,'F:prudhviaba 002.jpg')when i doselect * from aai am getting the result in the column d as0x463A5C707275646876695C70727564687669203030322E6A 7067how i can i view the image?pls clarify my doubtsatish

View Replies !

---

Converting Text Dat To Ntext Data
Hi all,

My organization have a web-based application and needs it to support multilingual so we will be adapting our app to use unicode. However, one of our problems is to convert existing data from text to ntext. I couldn't find anything that document this. What is the best way to do that? I would like to be able to migrate the data from an existing text column to another ntext column in the table.

If I can't do that, what are the options? If it's possible, I would like to be able to do this in sql script.


Thanks a mil, in advance.

Eddie

View Replies !

---

Implicit Conversion From Data Type Ntext To Varchar Is Not Allowed. Use The CONVERT Function To Run This Query.
Hello Guys,Have been getting this error(
Implicit conversion from data type ntext to varchar is not allowed. Use the CONVERT function to run this query.
) when running on the live environment but it was fine when run locally. If anyone has similar problem please let me know the fix you have done.
Thank you.

View Replies !

---

How To Handle Text, Ntext Data Types Of SQL Server
i have created asp.net page, one feild of this page text area.
when i insert some text through this page in "text feild" of SQL server on few words of this feild cut and inserted to text feild of SQL server but all text that i have written in text area feild.

can u please help me how to handle so that i can all text in text feild of SQL server data type text/next.

View Replies !

---

Image Data Type
What save inside image data type field?
Thanks,mohsen

View Replies !

---

Image Data Type
I have a field in my personal table that has image data type as Pic,my SQL code is :
SELECT Department.ID,Department.[Name],Department.CreatedDate,Department.[Pic] ,COUNT([Group].[Name])
FROM Department INNER JOIN [Group] ON Department.ID=[Group].DepartmentID
Group by Department.ID,Department.[Name],Department.CreatedDate,Department.[Pic]
This error occured :
Msg 306, Level 16, State 2, Line 1
The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator.
Please help me.
Thanks.

View Replies !

---

Image Data Type
hi, i'm a student doing my final year project. during the user requirements stage, my client proposed storing all files (.doc, .jpg, .mp3) into the sql database. i found out that the way to do this is to write the files as binary data in order to store them in the database. my concern is will this data storage overload the database server? i read somewhere that the retrieval of data as binary data is the same as retrieving text. but the estimation of users is around 27,000.. if i'm not wrong, the sql database server should be MS SQL Server 2005, or at least 2003.

View Replies !

---

Image Data Type
I have been asked to write a piece of code that will insert an image object into a database using a stored procedure and the Microsoft Enterprise Library.  Has anyone done this before?  Do you have any code examples about how to update a database with an image datatype that needs to be chunked, etc...
 
In this instance, I need to open up a word document and save the contents as an image in a database.   

View Replies !

---

Image Data Type
Hi,In my SQL Server 2000, I have a Table MyUser which has one colum PassWord,and the PassWord's datatype is Image. I'm wondering how can a password bean image.Thanks for help.Jason

View Replies !

---

Image Data Type
I'm developing a website with SQL SERVER 2000 and IIS6 (beta).
I'm using ASP.NET webforms for my application.
I was wondering if anyone knows how to use the Image datatype for dynamically loading images/word docs/sound files

View Replies !

---

Image Data Type
Can anyone provide info on how to insert and store a .jpeg in a database table?
Thanks,
Kellie

View Replies !

---

About Image Data Type
Hi!
we know there is data type -- image, when i wanna input real image into these kind of data type, i usually use access to achieve this goal, but i think if i have no access, i will face to trouble!
could you tell me how i can input real image into image data type by means of SQL?
thanx very much!

View Replies !

---

Image Data Type
Hi,
I have a table with a column having image data type in it.I need to move four records from this table to another table in development box.Can any one suggest me how can i do this? I don't think insert into select * will insert image data type.Is there any way around?
thanks
Mohan

View Replies !

---

Image Data Type
pls. Help!
I am not getting that how to use the image datatype in sql server 2000
when i am inserting text to it and on retrieving it is showing hexadecimal string ...
I want to know all of your views on the usage of image datatype..
Thanks...

View Replies !

---

Inserted/deleted Table.
Hi,

I am currently working on a MS SQL server 2000.

I would like to access the data inserted or deleted within a trigger. however the built-in tables -- inserted and deleted --- are not accessible. anyone knows why? And is there any other way to do this?

Thanks

View Replies !

---

Trigger Inserted/Deleted
Hello,

Is there an alternative to using FETCH to loop through the Inserted/Delete Tables within a trigger? Does this work?

SELECT * FROM Inserted
  BEGIN

    if INSERTED.IsActive then ...


  END

Would this only see the first record?

Currently I'm doing the following;

AS
DECLARE @JobID INTEGER;
DECLARE @IsActive BIT;
DECLARE Temp CURSOR FOR SELECT JobID, IsActive FROM Inserted;
BEGIN
  OPEN Temp;
  FETCH NEXT FROM Temp INTO @JobID, @IsActive;
  WHILE (@@FETCH_STATUS = 0) BEGIN

    if @IsActive then ...

     FETCH NEXT FROM Temp INTO @JobID, @IsActive;
  END;
  CLOSE Temp;
  DEALLOCATE Temp;

Is this the best method for looping through the Deleted/Inserted or any other table within a trigger?

Thanks,
Steve

View Replies !

---

Inserted And Deleted Table
 

hi
for after trigger the records stored in followig table
inserted and deleted table.
 
but i want to know where this tables physically stored ...i mean in which database master or some other database?
 
and 2nd thing tigger fired for each row or for only insert,delete,update statement?
 
thanx

View Replies !

---

Last Inserted, Updated Or Deleted?
How can we capture the last inserted, updated or deleted ID from the database ?

View Replies !

---

Converting Text Data To Ntext Data
Hi,

We are adapting our application to use unicode. However, one of our ptoblems is to ocnvert existing data from text to ntext. I couldn't find anything that document this. What is the preferred way to do this? I would like to be able to migrate the data from an existing text column to another ntext column in the table.

If I can't do that, what are the options? Preferrably, I would like to be able to do this in sql script.

Thanks.

Maggie :)

View Replies !

---

Converting Text Data To Ntext Data
Hi all,

My organization have a web-based application and needs it to support multilingual so we will be adapting our app to use unicode. However, one of our problems is to convert existing data from text to ntext. I couldn't find anything that document this. What is the best way to do that? I would like to be able to migrate the data from an existing text column to another ntext column in the table.


I brief you about my system, I used List manager system to store the messages and distribute to all members. Right now,by design the Lyris system keep the message in the text field which mean it 's not support multilanguage directly because of unicode field. We needs to create new Db which has the data structure as same as Lyris but just one difference is keep the message in unicode format (ntext) which we need the sql script to automatically update the new record get from Lyris to new DB.


If I can't do that, what are the options? If it's possible, I would like to be able to do this in sql script.


Thanks a mil, in advance.

Eddie

View Replies !

---

Manipulating Text,nText Data Types Filed In Tsql
I have to run a dynamic sql that i save in the database as a TEXT data type(due to a large size of the sql.) from a .NET app.  Now i have to run this sql from the stored proc that returns the results back to .net app. I am running this dynamic sql with sp_executesql like this..
EXEC sp_executesql @Statement,N'@param1 varchar(3),@param2 varchar(1)',@param1,@param2,GO
As i can't declare text,ntext etc variables in T-Sql(stored proc), so i am using this method in pulling the text type field "Statement".
DECLARE @Statement varbinary(16)SELECT @Statement = TEXTPTR(Statement)FROM table1 READTEXT table1.statement @Statement 0 16566
So far so good, the issue is how to convert @Statment varbinary to nText to get it passed in sp_executesql.
Note:- i can't use Exec to run the dynamic sql becuase i need to pass the params from the .net app and Exec proc doesn't take param from the stored proc from where it is called.
I would appreciate if any body respond to this.
 
 
 

View Replies !

---