Variable As Column In Cursor Select
I can't seem to get a cursor to work when I'm passing in a variable for a column name of the select statement. For example:
declare @col varchar(50)
set @col = 'Temperature'
declare notifycurs cursor scroll for
select @col from Table
Obviously this won't work correctly (since the result will simply be 'Temperature' instead of the actual float value for temperature). I tried to use quotes for the entire statement with an EXEC
(ie. exec('select '+@col+' from Table' )
but that gave me an error.
Is there a way to pass in a variable for a column name for a curor select statement????
View Complete Forum Thread with Replies
Related Forum Messages:
Adding Variable To SELECT For CURSOR
I'm trying to build a select statement for a CURSOR where part of the SQL statement is built using a variable. The following fails to parse: Declare Cursor1 Cursor For 'select table_name from ' + @database + '.Information_Schema.Tables Where Table_Type = ''Base Table'' order by Table_Name' Open cursor1 That doesn't work, I've also tried using an Execute() statement, no luck there either. Any ideas or suggestions are greatly appreciated.
View Replies !
Output Of Select Stament Into Variable Within Cursor
Within a cursor that I am building I would like to execute a select statement built from a varchar variable as such: SELECT @BuildDBPageUsed = 'SELECT sum(reserved) FROM ' + @DatabaseName + '.dbo.sysindexes WHERE segment <> 2' Next I execute the statement, which is now in the variable @BuildDBPageUsed. Such as: EXEC (@BuildDBPageUsed) The resulting output I need to set to another variable @DBPageUsed which is integer. I have been unsuccessful in finding the correct set of commands to do this. How should I build the command to input the results of the EXEC (@BuildDBPageUsed) into the integer variable @DBPageUsed? *Thanks* for any help in this matter. Brad
View Replies !
Combing In A Cursor, A Select Statement With The WHERE Clause Stored In A Variable
Hi I am ramesh here from go-events.com I am using sql mail to send out emails to my mailing list I have difficulty combining a select statement with a where clause stored in a variable inside a cursor The users select the mail content and frequency of delivery and i deliver the mail I use lots of queries and a stored procedure to retrieve thier preferences. In the end i use a cursor to send out mails to each of them. Because my query is dynamic, the where clause of my select statement is stored in a variable. I have the following code that does not work For example DECLARE overdue3 CURSOR LOCAL FORWARD_ONLY FOR SELECT DISTINCT Events.E_Name, Events.E_SDate, Events.E_City, Events.E_ID FROM Events, IndustryEvents + @sqlquery2 OPEN overdue3 I get an error message at the '+' sign which says, cannot use empty object or column names, use a single space if necessary How do I combine the select statement with the where clause? Help me...I need help urgently
View Replies !
How Do I Select A Column From Sp_spaceused Into A Local Variable?
I want to look at the size of the current database, so I can create a newone if it gets too big (we are working around the 2gb MSDE limit for ourcustomers).I would like to do something like this:DECLARE @size INTEGERexecute BLOB0000.dbo.sp_spaceusedand make @size = the database_size column value that sp_spaceused returns.Any way to do this?Thanks.
View Replies !
Random Selection From Table Variable In Subquery As A Column In Select Statement
Consider the below code: I am trying to find a way so that my select statement (which will actually be used to insert records) can randomly place values in the Source and Type columns that it selects from a list which in this case is records in a table variable. I dont really want to perform the insert inside a loop since the production version will work with millions of records. Anyone have any suggestions of how to change the subqueries that constitute these columns so that they are randomized? SET NOCOUNT ON Declare @RandomRecordCount as int, @Counter as int Select @RandomRecordCount = 1000 Declare @Type table (Name nvarchar(200) NOT NULL) Declare @Source table (Name nvarchar(200) NOT NULL) Declare @Users table (Name nvarchar(200) NOT NULL) Declare @NumericBase table (Number int not null) Set @Counter = 0 while @Counter < @RandomRecordCount begin Insert into @NumericBase(Number)Values(@Counter) set @Counter = @Counter + 1 end Insert into @Type(Name) Select 'Type: Buick' UNION ALL Select 'Type: Cadillac' UNION ALL Select 'Type: Chevrolet' UNION ALL Select 'Type: GMC' Insert into @Source(Name) Select 'Source: Japan' UNION ALL Select 'Source: China' UNION ALL Select 'Source: Spain' UNION ALL Select 'Source: India' UNION ALL Select 'Source: USA' Insert into @Users(Name) Select 'keith' UNION ALL Select 'kevin' UNION ALL Select 'chris' UNION ALL Select 'chad' UNION ALL Select 'brian' select 1 ProviderId, -- static value '' Identifier, '' ClassificationCode, (select TOP 1 Name from @Source order by newid()) Source, (select TOP 1 Name from @Type order by newid()) Type from @NumericBase SET NOCOUNT OFF
View Replies !
Cursor/variable Help
I'm not sure about this one so if someone could help I'd appreciate this. As shown below I've declared a variable name1 to be used in a while statement substituting for an object name in a select statement (2000 SP3a) and throwing the shown error. Are variables allowed to be used to substitute for object names or is there another problem? Thanks.
View Replies !
How To Use Variable In A Cursor
if i have the cursor cursor: cursor for select name from sysobjects where type='P' AND category='0' and wants a variable before sysobjects which equals a table name, so itll be: cursor for select name from @variable..sysobjects where type='P' AND category='0' how do i include a variable within a cursor statement
View Replies !
Bind Variable In CURSOR
SQL Server 2000 SP4 with AWE hotfix. Windows 2003 SP1.I have a stored procedure which is not working the way I think itshould be.I have a CURSOR which has a variable in the WHERE clause:DECLARE get_tabs CURSOR local fast_forward FORSELECT distinct tablename, id, shcontig1dt, shcontig2dtFROM db_indWHERE dbname = @dbnameORDER BY tablenameIt won't return anything, even when I verify that @dbname has a valueand if I run the query in Query Analyzer with the value, it returnsrows:SELECT distinct tablename, id, shcontig1dt, shcontig2dtFROM db_indWHERE dbname = 'Archive'ORDER BY tablenameDB_Rpt_Fragmentation11575791622006-03-29 09:52:11.7772006-03-2909:52:11.823DtsAdtStdArchive_DataSourceType5175768822006-03-2909:52:11.8702006-03-29 09:52:11.887DtsADTstdArchiveNotUsed3575763122006-03-29 09:52:11.8872006-03-2909:52:12.103I've taken out most of the guts for simplicity, but here's what I'vegot:--CREATE TABLE dbo.db_ind--(--db_ind_tkintIDENTITY,-- id int NULL,-- tablename sysname NOT NULL,-- indid int NULL,-- indexname sysname NOT NULL,-- shcontig1dt datetime NULL,-- defragdt datetime NULL,-- shcontig2dt datetime NULL,-- reindexdt datetime NULL--)ALTER PROCEDURE IDR(@hours int)AS--SET NOCOUNT ON--SET ANSI_WARNINGS OFFDECLARE @tabname varchar(100),@indname varchar(100),@dbname varchar(50),@vsql varchar(1000),@v_hours varchar(4),@shcontig1dtdatetime,@shcontig2dtdatetime,@defragdtdatetime,@reindexdtdatetime,@idint,@indidint,@rundbcursorint,@runtabcursorint,@runindcursorintDECLARE get_dbs CURSOR local fast_forward FORSELECT dbnameFROM db_jobsWHERE idrdate < getdate() - 4or idrdate is nullORDER BY dbnameDECLARE get_tabs CURSOR local fast_forward FORSELECT distinct tablename, id, shcontig1dt, shcontig2dtFROM db_indWHERE dbname = @dbnameORDER BY tablenameDECLARE get_inds CURSOR local fast_forward FORSELECT indid, indexname, defragdt, reindexdtFROM db_indWHERE dbname = @dbnameAND tablename = @tabnameORDER BY indexnameOPEN get_dbsFETCH NEXT FROM get_dbsINTO @dbnameIF @@FETCH_STATUS = 0SELECT @rundbcursor = 1ELSESELECT @rundbcursor = 0SELECT @v_hours = CONVERT(varchar,@hours)--================================================== ================================================== =====--================================================== ================================================== =====--================================================== ================================================== =====WHILE @rundbcursor = 1BEGIN -- db whilePRINT '============================='PRINT @dbnamePRINT '============================='--================================================== ================================================== =====--================================================== ================================================== =====OPEN get_tabsFETCH NEXT FROM get_tabsINTO @tabname, @id, @shcontig1dt, @shcontig2dtIF @@FETCH_STATUS = 0BEGINPRINT 'table: ' + @tabnameSELECT @runtabcursor = 1endELSEBEGINPRINT 'not getting any tables! '-- <<<<< THIS IS WHERE IT HITSSELECT @runtabcursor = 0endWHILE @runtabcursor = 1BEGINPRINT @dbnamePRINT @tabname--================================================== ================================================== =====OPEN get_indsFETCH NEXT FROM get_indsINTO @indid, @indname, @defragdt, @reindexdtIF @@FETCH_STATUS = 0SELECT @runindcursor = 1ELSESELECT @runindcursor = 0WHILE @runindcursor = 1BEGINPRINT 'Index:' + @dbname + '.' + @tabname + '.' + @indnameFETCH NEXT FROM get_indsINTO @indid, @indname, @defragdt, @reindexdtIF @@FETCH_STATUS = 0SELECT @runindcursor = 1ELSESELECT @runindcursor = 0END-- 1st loop through indexesCLOSE get_inds--================================================== ================================================== =====--==========PRINT 'db.tab: ' + @dbname + '.' + @tabname--==========--================================================== ================================================== =====OPEN get_indsFETCH NEXT FROM get_indsINTO @indid, @indname, @defragdt, @reindexdtIF @@FETCH_STATUS = 0SELECT @runindcursor = 1ELSESELECT @runindcursor = 0WHILE @runindcursor = 1BEGINPRINT 'dbname: ' + @dbnamePRINT 'tabname: ' + @tabnamePRINT 'indname: ' + @indnameFETCH NEXT FROM get_indsINTO @indid, @indname, @defragdt, @reindexdtIF @@FETCH_STATUS = 0SELECT @runindcursor = 1ELSESELECT @runindcursor = 0END -- 2nd loop through indexesCLOSE get_inds--================================================== ================================================== =====FETCH NEXT FROM get_tabsINTO @tabname, @id, @shcontig1dt, @shcontig2dtIF @@FETCH_STATUS = 0SELECT @runtabcursor = 1ELSESELECT @runtabcursor = 0END-- loop through tablesCLOSE get_tabs--================================================== ================================================== =====--================================================== ================================================== =====PRINT 'Index Maintenence complete. Job report in[DB_Rpt_Fragmentation]'PRINT ''FETCH NEXT FROM get_dbsINTO @dbnameIF @@FETCH_STATUS = 0SELECT @rundbcursor = 1ELSESELECT @rundbcursor = 0END -- loop through databasesCLOSE get_dbsdeallocate get_dbsdeallocate get_tabsdeallocate get_inds--================================================== ================================================== =====--================================================== ================================================== =====--================================================== ================================================== =====GOAnd this is what I'm getting:=============================Archive=============================(0 row(s) affected)not getting any tables!Index Maintenence complete. Job report in [DB_Rpt_Fragmentation]......etc.Am I missing something obvious?Thank you for any help you can provide!!
View Replies !
Set Value For Variable In A Declared Cursor
Hi, I have a problem on setting the value for the variable in a declared cursor. Below is my example, I have declared the cursor c1 once at the top in a stored procedure and open it many times in a loop by setting the variable @str_var to different values. It seems the variable cannot be set after the cursor declared. Please advise how can I solve this issue. ------------------------------------------------------------------------ DECLARE @str_var VARCHAR(10) DECLARE @field_val VARCHAR(10) DECLARE c1 CURSOR LOCAL FOR SELECT field1 FROM tableA WHERE field1 = @str_var WHILE (Sometime TRUE) BEGIN .... SET @str_var = 'set to some values, eg. ABC123, XYZ123' OPEN c1 FETCH c1 INTO @field_val WHILE (@@fetch_status != -1) BEGIN PRINT @field_val ... FETCH c1 INTO @field_val END CLOSE c1 END DEALLOCATE c1 ---------------------------------------------------------------------- Thanks a lots, Vincent
View Replies !
Using Cursor Variable As A Tablename
I am currently using a cursor to scroll through sysobjects to extract table names and then extracting relevant column names from syscolumns. I then need to run the following script: declare Detail_Cursor cursor for select @colname, max(len(@colname)) from @table The message I receive is "must declare variable @table". Immediately prior to this script I printed out the result of @table which works fine so the variable obviously is declared and populated. Can anyone let me know what I'm doing wrong or how I can get the same result. Thanks
View Replies !
Cursor Variable Problem
My code below is supposed to pull the destination and then work out 2 calculations per month on each destination. The results returns the string '@destination' instead of the value from the table and also the month value is returned completely wrong. My main problem though is the getting the correct destination to return. If anybody has any pointers I would be very grateful. This is driving me mad!! Thanks a lot in advance Here some sample code: DECLARE @Destination char(50) DECLARE AVGCallsToDest INSENSITIVE scroll CURSOR FOR SELECT destination from table1 OPEN AVGCallsToDest FETCH First FROM AVGCallsToDest INTO @Destination WHILE (@@FETCH_STATUS = 0 ) BEGIN exec("Insert into NewTable(Card, [Month], NumberOfCalls, AverageLength, Destination) select 'Phone Card' as 'Card', DATEPART(mm,adetdate) as 'Month',count(*) as 'NumberOfCalls', avg(bdur)/60 as 'AverageLength', "" +@Destination+ "" as 'Destination' from table1 (nolock) whereDATEPART(mm,adetdate) = 5 and DATEPART(yyyy,adetdate) = DATEPART(yyyy,getdate()-1) group by DATEPART(mm,adetdate),bdur order by Month") FETCHNext FROM AVGCallsToDest INTO@Destination End CLOSE AVGCallsToDest DEALLOCATE AVGCallsToDest
View Replies !
How To Iterate Through Table Variable Without Using Cursor
Hi, I need a small help. In my stored procedure, i create a table variable and fill it with records based on my query. The ID field within the table is not continous and can have any value in increasing order .e.g. The ID sequence may be like 20, 33, 34, 59, 78, 79... I want to iterate through each record within the table but without using a Cursor. I want to use a loop for this purpose. There are many articles pointing out how to iterate through records in a table variable but that requires the IDs to be continous which is not possible in my case. Can anyone help me solve this problem... Any help is appreciated...
View Replies !
Variable As Field Name In CURSOR FOR UPDATE
I'm trying something like: UPDATE tbl SET @varFieldName = @varValue The procedure runs, and when I PRINT @varFieldName, it looks fine, but the table isn't getting updated, and no errors, wierd. I have the CURSOR open for update, but I didn't list the field names, that shouldn't be a problem, as all fields should be updateable then. To get the field name, I : SET @varFieldName = 'SomeChars' + LTRIM(STR(asmallint)) + 'SomeMoreChars' Thanks, Carl
View Replies !
Cursor Declared With Variable In Where Clause
When I execute next query on sqlserver 6.5 nested in stored procedure I can see that 'open testCursor' selected rows using new value of @var. When I execute query on sqlserver 7.0 I can see that 'open testCursor' selected rows using value of @var before 'declare ... cursor'. Is there any way to force sqlserver 7.0 to proccess cursor like it did it before. select @var = oldValue declare testCursor cursor for select someColumns from someTable where someColumn = @var select @var = newValue open testCursor fetch next from testCursor into @someColumns Thank's in advance. Mirko.
View Replies !
Possible To Fetch Next From Cursor Into Table Variable?
Hello, I have searched the net for an answer but could not find one. When I declare a table variable and then try to insert fetched row into the table variable like: Code Snippet declare @table table (col1 nvarchar(50), col2 nvarchar(50)) declare curs for select * from sometable open curs fetch next from curs into @table it does not work. any help would be great. thnx
View Replies !
How To Read The Rows In A Cursor Variable
Hi, I have a dynamic query that returns its values in a cursor variable. How do I read each row from this cursor in a loop ? Eg.: use AdventureWorks go DECLARE @sqlnvarchar(4000), @paramsnvarchar(4000), @tables_cursorcursor, @db_namenvarchar(50), @table_namenvarchar(4000), @schema_namenvarchar(50); set @db_name = 'AdventureWorks'; set @schema_name = 'Production'; set @table_name = 'BillOfMaterials, Product'; set @sql = ' select a.name table_name ' + ' from ' + @db_name + '.sys.tables a join ' + @db_name + '.sys.schemas b ' + ' on (a.schema_id = b.schema_id) ' + ' where b.name= @schema_name1 ' + ' and @table_name1 is null ' + ' order by 1; ' SELECT @params = N' @table_name1 nvarchar(3000) ,' + N' @schema_name1 nvarchar(100) ,' + N' @cursor cursor output' EXEC sp_executesql @sql, @params, @table_name,@schema_name , @tables_cursor OUTPUT
View Replies !
Variable Assignment In Cursor Declaration
Hi, here is the code segment below; ... DECLARE find_dates CURSOR FOR SELECT @SQL = 'select DISTINC(Dates) from ['+@name+'].dbo.['+@t_name+'] order by [Dates] ASC' EXEC (@SQL) but it gives error, variable assignment is not allowed in a cursor declaration. I need to use dynamic SQL , the only way to access all the dbs and their tables inside. Please help. thanks
View Replies !
How To Include Variable In CURSOR SQL Filter Clause?
After trying every way I could come up with I can't get a filter clauseto work with a passed variable ...I have a cursor that pulls a filter string from a table (works OK),then I want to use that filter in a second cursor, but can't get thesyntax ...@bakfilter is equal to "MISV2_db_%.BAK" before I try to open and fetchfrom the second cursor. Here is the cursor declaration:DECLARE curFiles CURSOR FORSELECT FileName, FileDateFROM DataFileWHERE (((Active)=1) AND ((FileName) LIKE '@bak_filter'))ORDER BY FileDate DESCWhat do I need to do to get it to use the string contained in@bak_filter?Thanks in advance, Jim
View Replies !
In Cursor: Help To Perform Proper Comparison Using Variable
Hi All, I failed to find record when using variable in cursor in WHERE clause: ID is uniqueidentifier field in the table DECLARE @EncounterID uniqueidentifier ........ WHERE ID = @EncounterID -> this does not work, though @EncounterID is set properly and can see its value in debugger WHERE ID = 'E3AE2C5B-06F2-4A3C-A3A4-7D6CC43DE012' -> this works fine and record found Tried to CAST(@EncounterID as char(40)) but still no luck. I would greatly appreciate any advise hot to make it working. Thank you very much in advance Roman
View Replies !
Question About Assigning Cursor Variable Data Types...
Hi, I'm just curious about something...when assigning a datatype to a cursor variable in ORACLE, you can use the keyword TYPE to automatically grap the datatype from the associated column (or use ROWTYPE to create a cursor variable to represent an entire row in a table). It's so much easier and if the datatype of one of the cursor columns is altered, the associated cursor variable assumes the new datatype. Is there a way to do this in SQL Server 7.0 ? many thanks :)
View Replies !
Dynamic Query, Local Cursor Variable And Global Cursors
Hi all. I am stuck in a bit of a conundrum for quite a while now, and I hope someone here will help me figure this one out. So, first things first: let me explain what I need to do. I am designing a web application that will allow users to consult info available in a SQL2000 database. The user will enter the search criterea, and hopefully the web page will show matching results. The problem is the results shown aren't available per se in the DB, I need to process the data a bit. I decided to do so on the SQL Server side, though the use of cursors. So, when a user defines his search criteria, I run a stored procedure that begins by building a dynamic sql query and creating a cursor for it. I used a global cursor in order to do so. It looked something like this: SET @sqlQuery = ... (build the dinamic sql query) SET @cursorQuery = 'DECLARE myCursor CURSOR GLOBAL FAST_FORWARD FOR ' + @sqlQuery EXEC @cursorQuery OPEN myCursor FETCH NEXT FROM myCursor INTO ... CLOSE myCursor DEALLOCATE myCursor This works fine, if there's only one instance of the stored procedure running at a time. Should another user connect to the site and run a search while someone's at it, it'll fail due to the atempt to create a cursor with the same name. My first thought was to make the cursor name unique, which led me to: ... SET @cursorName = 'myCursor' + @uniqueUserID SET @cursorQuery = 'DECLARE '+ @cursorName + 'CURSOR FAST_FORWARD FOR ' + @sqlQuery EXEC @cursorQuery ... The problem with this is that I can't do a FETCH NEXT FROM @cursorName since @cursorName is a char variable holding the cursor name, and not a cursor variable. So to enforce this unique name method the only option I have is to keep creating dynamic sql queries and exucting them. And this makes the sp a bitch to develop and maintain, and I'm guessing it doesn't make it very performant. So I moved on to my second idea: local cursor variables. The problem with this is that if I create a local cursor variable by executing a dynamic query, I can't extract it from the EXEC (or sp_executesql) context, as it offers no output variable. I guess my concrete questions are: Is it possible to execute a dynamic sql query and extract a (cursor) variable from it?Is it possible to populate a local cursor variable with a global cursor, by providing the global cursor's name?Can I create a local cursor variable for a dynamic sql query? How? Anybody sees another way arround this?Thanks in advance, Carlos
View Replies !
Cannot Set A Variable From A Select Statement That Contains A Variable??? Help Please
I am trying to set a vaiable from a select statement DECLARE @VALUE_KEEP NVARCHAR(120), @COLUMN_NAME NVARCHAR(120) SET @COLUMN_NAME = (SELECT COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'CONTACTS' AND COLUMN_NAME = 'FIRSTNAME') SET @VALUE_KEEP = (SELECT @COLUMN_NAME FROM CONTACTS WHERE CONTACT_ID = 3) PRINT @VALUE_KEEP PRINT @COLUMN_NAME RESULTS ------------------------------------------------------------------------------------------- FirstName <-----------@VALUE_KEEP FirstName <-----------@COLUMN_NAME SELECT @COLUMN_NAME FROM CONTACTS returns: FirstName SELECT FirstName from Contacts returns: Brent How do I make this select statement work using the @COLUMN_NAME variable? Any help greatly appreciated!
View Replies !
Cursor Vs. Select
buddies,situation: a processing must take place on every row of a table, andoutput results to another table, that can't be done via an insertinto..select query (let's assume that it's not possible for now).There're 2 solutions I have in mind:1) open a cursor and cycle through each row (The table can have up to1M rows)2) create a clustered index (i.e on an identity column) then have aloop like:declare @i int, @rows int,@col1 varchar(20), @col2 varchar(20),... @coln varchar(20),@outval1 varchar(20),... -- output valuesselect @i=1, @rows = max(xid) from tblname -- xid is clustered indexedwhile (@i<=@rows)beginselect @col1 = col1, @col2 = col2,...@coln = colnfrom tblnamewhere xid = i-- do the processing on the variables-- then insert results to another tableset @i = @i+1endI'd like to know your ideas of which one would be more efficient. Anyother solutions are much appreciatedthanks,Tamy
View Replies !
Cursor Column Name
Is there any way in sql to know the column name in cursor. like in record set (rsName.Fields(1).Name gives us the coulumn name) Thanks in Advance
View Replies !
Using Select Statement Instead Of Cursor
Hi All, Can anyone please help? TableA has data as below: ssn sex dob rel_code 111111111 m 19500403 m 111111111 f 19570908 w 111111111 f 19770804 d 111111111 f 19801203 d 111111111 f 19869712 d 111111111 m 19870907 s 111111111 m 19901211 s I have to convert the rel_code into a specific manner so the data will look as below in TableB: ssn sex dob rel_code 111111111 m 19500403 01 111111111 f 19570908 02 111111111 f 19770804 20 111111111 f 19801203 21 111111111 f 19869712 22 111111111 m 19870907 30 111111111 m 19901211 31 Member's rel_code = 01 spouse's rel_code = 02 daughter's rel_code starts from 20 with the oldest and increments by 1. Son's rel_code starts from 30 and increments by 1 from oldest to the youngest. I know You can write a Sp with cursor and do this, but I would like to know if you can accomplish the same thing by a select or case or something else instead of a cursor. Thanks in advance. Jannat.
View Replies !
Select Statement In Cursor
Hi... I have a stored procedure that rertrieves data from an sql database and sends out a mail to each receipient who meets the criteria I am using SQL mail. I dynamically generate the where clause for my sql query based on criteria taken from other stored procedures and store it in a varchar variable called @sqlquery When i have the following code to run my cursor DECLARE overdue3 CURSOR LOCAL FORWARD_ONLY FOR SELECT DISTINCT Events.E_Name, Events.E_SDate, Events.E_City, Events.E_ID FROM Events, IndustryEvents + @sqlquery2 OPEN overdue3 I get an error message at the '+' sign which says, cannot use empty object or column names, use a single space if necessary. What should i do. i have tested the variable @sqlquery and it is definately not blank. There is no bracket error or anything. Please help!!! Thanks much indeed Ramesh
View Replies !
Select Statement In Cursor...Please Help
Sorry to disturb you guys but I have a problem on the select statement in sql cursor My select statement is stored in 2 variables one holds the select clause and the other holds the where clause I am doing a small test as my seelct statement is very complicated lots of joins and it is built up from lots of parameters from other queries and from another stored procedure as well Hope you can help when i type the following code: declare @query varchar(100) declare @query2 varchar(100) set @query = "SELECT FROM ml_testMaillist " set @query2 = " WHERE m_Email= 'ramesh@go-events.com' " DECLARE overdue2 CURSOR LOCAL FORWARD_ONLY exec(@query + @query2) open overdue2 I get the error Server: Msg 156, Level 15, State 1, Line 11 Incorrect syntax near the keyword 'exec'. Please please help as this is very impt to me Thanks Thanks Regards
View Replies !
Select Output With Cursor
In my previous post I asked how to do the bottom question. I got a response to use a cursor, now I made an attempt to use a cursor but I still get the same response. Any help will be greatly appreciated. --CURRENT OUTPUT-- empID Rank Skills ------- ---- -------------------------------------------------- 2924 1 Create Documents 2924 2 Mail Merge 2924 3 Create Header and footer 2924 3 Create Spreadsheet 2924 3 Joining Tables in a Query --DESIRED OUTPUT-- empID Rank Skills ------ ---- ------------ 2924 1 Create Documents 2924 2 Mail Merge 2924 3 Create Header and footer, Joining Tables in a Query, Create Spreadsheet --Here is the cursor script.-- Declare @skills varchar(255),@skills2 varchar(255),@message varchar(255),@empID varchar(255), @Rank varchar(255) DECLARE emp_skills CURSOR For select C.empID, B.Rank,B.Text1 as Skills from tbl_survey_rank B , tbl_survey_valueID C where PATINDEX ( '%'+ltrim(rtrim(B.valueID))+'%', C.text1) >0 and C.empID = '2924'and (B.Rank ='1'or B.Rank ='2' or B.Rank ='3') or PATINDEX ( '%'+ltrim(rtrim(B.valueID))+'%', C.text1) >0 and B.Rank ='3'and C.empID = '2924' or PATINDEX ( '%'+ltrim(rtrim(B.valueID))+'%', C.text1) >0 and B.Rank ='3'and C.empID = '2924' or PATINDEX ( '%'+ltrim(rtrim(B.valueID))+'%', C.text1) >0 and B.Rank ='3'and C.empID = '2924' or PATINDEX ( '%'+ltrim(rtrim(B.valueID))+'%', C.text1) >0 and B.Rank ='3'and C.empID = '2924' DECLARE emp_skills2 CURSOR For select B.Text1 as Skills from tbl_survey_rank B , tbl_survey_valueID C where PATINDEX ( '%'+ltrim(rtrim(B.valueID))+'%', C.text1) >0 and C.empID = '2924'and (B.Rank ='1'or B.Rank ='2' or B.Rank ='3') or PATINDEX ( '%'+ltrim(rtrim(B.valueID))+'%', C.text1) >0 and B.Rank ='3'and C.empID = '2924' or PATINDEX ( '%'+ltrim(rtrim(B.valueID))+'%', C.text1) >0 and B.Rank ='3'and C.empID = '2924' or PATINDEX ( '%'+ltrim(rtrim(B.valueID))+'%', C.text1) >0 and B.Rank ='3'and C.empID = '2924' or PATINDEX ( '%'+ltrim(rtrim(B.valueID))+'%', C.text1) >0 and B.Rank ='3'and C.empID = '2924' OPEN emp_skills OPEN emp_skills2 FETCH NEXT FROM emp_skills into @empID, @Rank, @skills FETCH NEXT FROM emp_skills2 into @skills2 WHILE @@FETCH_STATUS = 0 BEGIN SELECT @message = @skills2 FETCH NEXT FROM emp_skills2 into @skills2 Print @empID + ' '+ @Rank + ' ' + @message FETCH NEXT FROM emp_skills into @empID, @Rank, @skills End CLOSE emp_skills DEALLOCATE emp_skills CLOSE emp_skills2 DEALLOCATE emp_skills2 --Previous Post-- Another question for all you SQL experts, I have a lot of them. I am trying to select from a table wher some conditions need to be met based on an employee ID. What I am doing is when the rank is a 1,2, or 3 I pick up the text description of that rank. Can I make it so that I get the ID only once and all the text descriptions are on the same line. Here is the sql script along with my current output and my desired output. --SQL SCRIPT__ select C.empID, B.Rank,B.Text1 as Skills from tbl_survey_rank B , tbl_survey_valueID C where PATINDEX ( '%'+ltrim(rtrim(B.valueID))+'%', C.text1) >0 and C.empID = '2924'and (B.Rank ='1'or B.Rank ='2' or B.Rank ='3') --CURRENT OUTPUT-- empID Rank Skills ------- ---- -------------------------------------------------- 2924 1 Create Documents 2924 2 Mail Merge 2924 3 Create Header and footer 2924 3 Create Spreadsheet 2924 3 Joining Tables in a Query --DESIRED OUTPUT-- empID Rank Skills ------ ---- ------------ 2924 1 Create Documents 2924 2 Mail Merge 2924 3 Create Header and footer, Joining Tables in a Query, Create Spreadsheet
View Replies !
Cursor Select And Variables
I have problems to place my variable into the select statement. DECLARE @DB_NAME varchar(64) DECLARE MR_ReqPro_DB_cursor CURSOR FOR select name from dbo.sysdatabases where name like '%MR_req%' OPEN MR_ReqPro_DB_cursor FETCH NEXT FROM MR_ReqPro_DB_cursor INTO @DB_NAME WHILE @@FETCH_STATUS = 0 BEGIN print @DB_NAME; --works fine Select NAME, FILEDIRECTORY FROM @DB_NAME.MR_ReqPro.RQDOCUMENTS WHERE (FILEDIRECTORY LIKE '%\%'); FETCH NEXT FROM MR_ReqPro_DB_cursor INTO @DB_NAME END CLOSE MR_ReqPro_DB_cursor DEALLOCATE MR_ReqPro_DB_cursor GO How could i use a variable like @DB_Name in my select ?
View Replies !
CURSOR Select Clause
I need to dynamically construct the field order of a cursor based on fixed labels from another table, but when I put that resulting query I receive the error: Server: Msg 16924, Level 16, State 1, Line 78 Cursorfetch: The number of variables declared in the INTO list must match that of selected columns. I have 6 fields defined in the cursor select, and 6 parameters in the fetch. The results of running the @sql portion returns valid data. Should this be possible to define a parameter containing the select clause of the cursor? select colnum, coldesc, colname into #ae_defs from ae_adefs select @Sql = (select colname from #ae_defs where coldesc = 'PATIENT NAME') + ', ' + (select colname from #ae_defs where coldesc = 'PATIENT NUMBER') + ', ' + (select colname from #ae_defs where coldesc = 'ACCOUNT NUMBER') + ', ' + (select colname from #ae_defs where coldesc = 'VISIT DATE') + ', ' + (select colname from #ae_defs where coldesc = 'VISIT TYPE') + ', DocID from ae_dtl1' DECLARE myCursor CURSOR FOR Select @SQL OPEN myCursor print @@Cursor_rows FETCH NEXT FROM myCursor into @var1, @var2, @var3, @var4, @var5, @DocID
View Replies !
Dynamic Select For CURSOR
Hi all I am trying to do dynamic Select for Cursor. The dynamic would be like this: IF CONDITION1 IS TRUE: SELECT CustomerTenderID, CustomerSiteID, ContractPeriod, SupplierID FROM dbo.tnd_TenderSiteRateConsumptionView WHERE CustomerTenderID = @CustomerTenderID IF CONDITION2 IS TRUE: SELECT CustomerTenderID, CustomerSiteID, ContractPeriod, SupplierID FROM dbo.tnd_TenderSiteRateConsumptionView WHERE CustomerTenderID = @CustomerTenderID AND CustomerSiteID = @CustomerSiteID etc etc Here's the cursor DECLARE RateList CURSOR FOR SELECT CustomerTenderID, CustomerSiteID, ContractPeriod, SupplierID FROM dbo.tnd_TenderSiteRateConsumptionView WHERE (BASED ON CONDITION) ORDER BY CustomerTenderID, CustomerSiteID, SupplierID, ContractPeriod OPEN RateList FETCH NEXT FROM RateList INTO@CustomerTenderID, @ReturnedCustomerSiteID, @ReturnedContractPeriod, @ReturnedSupplierID WHILE @@FETCH_STATUS = 0 BEGIN SET @rowNum = @rowNum + 1 -- DO SOME FUNKY STUFF FETCH NEXT FROM RateList INTO@CustomerTenderID, @ReturnedCustomerSiteID, @ReturnedContractPeriod, @ReturnedSupplierID
View Replies !
Column Names With A Cursor
I have set up a query where I am using a cursor to pass result from onequery to use as select parameters in another query. The problem I amhaving is that when I pass the results into the second query I get thecolumn headers?How do you suppress the column headers from showing in the query? Isee how you select options - print headers.ThanksJason
View Replies !
Cursor To Increment A Value In A New Column
I am trying to update a new column called "sorting", with incremented values strating at 1 for the first row and 2 for the second and 3 for the thirsd etc......., before doing that I need the table to be sorted using three columns. I am using a cursor but it is not working I need your help. Thanks in advance: CODE: set @ordering_count=0 declare review_test_cursor cursor scroll keyset for select oid,decision_date,ranking,sorting,decision_id from DECISION_FLAGS order by oid,decision_date,ranking asc open review_test_cursor fetch next from review_test_cursor while (@@fetch_status = 0 ) Begin update DECISION_FLAGS set sorting = CAST ((@ordering_count + 1) as VARCHAR) set @ordering_count = @ordering_count + 1 fetch next from review_test_cursor end close review_test_cursor deallocate review_test_cursor
View Replies !
Computed Column And Cursor
Is it possible to use a cursor in computed column? I have two table (Table1 and Table2). Table 2 is child of Table 1. Table 2 has more than one record for each record in table 1. What I want is, to concat records from table 2 and show it as a column value for Table1. e.g. Code Block Table 1: Col1 Col2 1 ABC 1 DEF Table 2 T1Col1 Col2 1 A 1 - 1 B 1 1 1 - 1 C I want to see the Results as Table 1 Col1 Col2 Col3 1 ABC A-B1-C Is it possible to add computed column for the table1 to get the result as shown in above block. Thanks
View Replies !
Variable Width Column In Column Chart
Does anyone know how to get a variable column width from a vertical column chart? I have a chart using an Analysis Services data source using RS 2005. When the dataset file has only one record, the chart displays one enormous column going all the way across the chart. With two records, it displays two huge columns with a filler gap between the columns, etc. The chart has one value (column) and one category. Advice anyone? Thanks in advance.
View Replies !
How To Specify Which Database To Use For A Select Statement Within A Cursor?
Hi everyone, I have been trying to perform the following task: Using the sys.databases & sys.sysindexes views to display all the columns with a clustered index for all tables and all databases in a given server. So the end result will have 3 columns: Database name Table name Column name from that table with a clustered index I have already created the following script which displays all the databases for a given server: declare @DBname nvarchar(128) declare testCursorForDB cursor for select name from sys.databases with (nolock) where name not in ('master','tempdb','model','msdb') order by name open testCursorForDB fetch next from testCursorForDB into @DBname while @@fetch_status = 0 begin print @DBname fetch next from testCursorForDB into @DBname end close testCursorForDB deallocate testCursorForDB I also have created the following query which will display all the table and column names which have a clustered index for a given database: select object_name(i.id) as TableName, i.name as IndexName from sys.sysindexes as i with (nolock) where i.indid = '1' However, what I need help/advice on is how do I combine these two together into one working script (either using nested cursors or a better way). In other words, how can I specify which database to use (ie. using the "use database_name") so that my query above will be applied to each database found within the cursor. Any help is greatly appreciated Thanks!
View Replies !
SELECT DISTINCT Will Always Result In A Static Cursor
an example for the pb 1)First i have created a dynamic cursor : DECLARE authors_cursor CURSOR DYNAMIC FOR Select DISTINCT LOCATION_EN AS "0Location" from am_location WHERE LOCATION_ID = 7 OPEN authors_cursor FETCH first FROM authors_cursor 2)The result for this cursor is for expamle 'USA'. 3) If now i do an update on that location with a new value 'USA1' update am_location set location_en = 'USA1' WHERE LOCATION_ID = 7 4)now if i fetch the cursor , i''ll get the old value (USA) not (USA1). If i remove DISTINCT from the cursor declaration , the process works fine .
View Replies !
Incrementally Build Cursor Select Using CASE?
In Access/VB/DAO I can declare a string variable to contain my SELECT statement. If I do this I can build the string incrementally and finally open the cursor using OpenRecordset(strSQL). I'd like to be able to do this in SQL7. Let me illustrate: In Access97: Function Test(ByVal pstrOrder As String) As Boolean Dim strSQL As String strSQL = "SELECT * FROM tblEmployee " Select Case pstrOrder Case "Alpha" strSQL = strSQL & "ORDER BY [LastName], [FirstName]" Case "SSN" strSQL = strSQL & "ORDER BY [SSN]" End Select db.OpenRecordset(strSQL) End Function This is a very simple example....I have a lot of complex SELECT statements and I don't want to retype the same code in the same procedure that does ALMOST the same thing. I'm hoping to use something like the CASE construct: DECLARE csrEmployee CURSOR FOR SELECT * FROM tblEmployee (CASE @pstrOrder WHEN "Alpha" THEN ORDER BY LastName, FirstName WHEN "SSN" THEN ORDER BY SSN END) Can anyone out there help?
View Replies !
How To Put Condition In Select Statement To Write A Cursor
col1 col2 col3 col4 36930.60 145 N . 00 17618.43 190 N . 00 6259.20 115 N .00 8175.45 19 N .00 18022.54 212 N .00 111.07 212 B .00 13393.05 67 N .00 In above 4 col if col3 value is B then cursor has to fectch appropriate value from col4. if col3 value is N then cursor has to fectch appropriate value from col1. here col2 values are unique. Can any one reply for this..............
View Replies !
SELECT DISTINCT Will Always Result In A Static Cursor
An example for my pb 1) Created a dynamic cursor : DECLARE cursor_teste CURSOR DYNAMIC FOR Select DISTINCT name from table WHERE ID = 1 OPEN cursor_teste FETCH first FROM cursor_teste 2)The result for this cursor is for example 'teste'. 3) If now i do an update on that name with a new value 'teste1' than if i fetch the cursor , i''ll get the old value (teste) . any idea how to make a select distinct result in a dynamic Cursor?
View Replies !
Increment In Select Query Without Cursor And Temp Table
I have: Select T0.Id_Roomtype, count(T0.ID_Room)as Total, convert(smalldatetime,'20000601') as ADate --- !!!! from rmRoom T0 where T0.id_Property = 1 group by T0.Id_Roomtype How to do: declare @x int set @x = 36901 Select T0.Id_Roomtype, count(T0.ID_Room)as Total, convert(smalldatetime,(set @x = @x+1)) as ADate --- !!! from rmRoom T0 where T0.id_Property = 1 group by T0.Id_Roomtype I am trying to increment value in Column ADate so to get new date for each row Is it possible without using cursor and temp table ? ht
View Replies !
Moving Average Using Select Statement Or Cursor Based?
ID DATE(dd/mm/yy) TYPE QTYIN COST_IN_AMT COST_OUT_AMT(MOVING AVERAGE) 1 01/01/2007 PURCHASE 10 1000 2 01/01/2007 PURCHAES 5 1100 3 01/01/2007 SALES -5 *TobeCalculated 4 02/01/2007 Purchase 20 9000 5 02/01/2007 SALES -10 *TobeCalculated 5 02/01/2007 purchase 50 8000 6 03/01/2007 Sales -10 *TobeCalculate 7 01/01/2007 Purchase 20 12000 I have a table when user add new sales or puchase will be added to this table ITEM_TXNS. The above date is part of the table for a ProductID . (The field is removed here) In order to calculate the balance amount using moving average, I must calculated the cost_out_amt first on the fly. When user add new sales I also need to determine the cost/unit for a product id using moving average. The problem is I can not just use sum, because i need to determine cost_out_amt for each sales first which will be calculated on the fly. The reason i dont store the cost_out_amt (instead calculate on the fly) because User could Edit the previous sales/purchase txn or Insert new sales for a previous date. Example THe record with ID 9. By Adding this txn with ID 9, would cause all the cost_out_amt will be incorrect (Using moving Average) if i store the cost_amout_out on entrying txn and need to be recalculated. Instead I just want to calculate on the fly and able to determine the cost avr for a specific point of time. Should I just use Cursor and loop all the record and calculate the cost or maybe I can just use on Select Statement?
View Replies !
Using Stuff To Return A String Of Values From A Column Without A Cursor
I think it was Pat Phelan who posted a little trick here where he used the STUFF function to create a string fo values from a column without using a cursor. I am starting a brand new project and I did my table design and I am awaiting a finalized requirements document to start coding and I thought I would spend a little time writing some code to autogenerate some generic one record at a time SELECT, INSERT,UPDATE and DELETE stored procedures. With the coming holiday things are getting quiet around here. The code that is not working is listed below. It does not work. It returns Null. I suck. DECLARE @column_names varchar(8000) SET @column_names = '' SELECT @column_names = STUFF(@column_names,LEN(@column_names),0,C.COLUMN_ NAME + ', ') FROM INFORMATION_SCHEMA.COLUMNS C WHERE TABLE_NAME = 'MyTable' SELECT @column_names little help?
View Replies !
Order By Clause In DECLARE CURSOR Select Statement Won't Compile
The stored procedure, below, results in this error when I try to compile... Msg 156, Level 15, State 1, Procedure InsertImportedReportData, Line 69 Incorrect syntax near the keyword 'ORDER'. However the select statement itself runs perfectly well as a query, no errors. The T-SQL manual says you can't use the keywords COMPUTE, COMPUTE BY, FOR BROWSE, and INTO in a cursor select statement, but nothing about plain old ORDER BYs. What gives with this? Thanks in advance R. The code: Code Snippet -- ================================================ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO IF object_id('InsertImportedReportData ') IS NOT NULL DROP PROCEDURE InsertImportedReportData GO -- ============================================= -- Author: ----- -- Create date: -- Description: inserts imported records, marking as duplicates if possible -- ============================================= CREATE PROCEDURE InsertImportedReportData -- Add the parameters for the stored procedure here @importedReportID int, @authCode varchar(12) AS BEGIN DECLARE @errmsg VARCHAR(80); -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; --IF (@authCode <> 'TX-TEC') --BEGIN -- SET @errmsg = 'Unsupported reporting format:' + @authCode -- RAISERROR(@errmsg, 11, 1); --END DECLARE srcRecsCursor CURSOR LOCAL FOR (SELECT ImportedRecordID ,ImportedReportID ,AuthorityCode ,[ID] ,[Field1] AS RecordType ,[Field2] AS FormType ,[Field3] AS ItemID ,[Field4] AS EntityCode ,[Field5] AS LastName ,[Field6] AS FirstMiddleNames ,[Field7] AS Title ,[Field8] AS Suffix ,[Field9] AS AddressLine1 ,[Field10] AS AddressLine2 ,[Field11] AS City ,[Field12] AS [State] ,[Field13] AS ZipFull ,[Field14] AS OutOfStatePAC ,[Field15] AS FecID ,[Field16] AS Date ,[Field17] AS Amount ,[Field18] AS [Description] ,[Field19] AS Employer ,[Field20] AS Occupation ,[Field21] AS AttorneyJob ,[Field22] AS SpouseEmployer ,[Field23] As ChildParentEmployer1 ,[Field24] AS ChildParentEmployer2 ,[Field25] AS InKindTravel ,[Field26] AS TravellerLastName ,[Field27] AS TravellerFirstMiddleNames ,[Field28] AS TravellerTitle ,[Field29] AS TravellerSuffix ,[Field30] AS TravelMode ,[Field31] As DptCity ,[Field32] AS DptDate ,[Field33] AS ArvCity ,[Field34] AS ArvDate ,[Field35] AS TravelPurpose ,[Field36] AS TravelRecordBackReference FROM ImportedNativeRecords WHERE ImportedReportID IS NOT NULL AND ReportType IN ('RCPT','PLDG') ORDER BY ImportedRecordID -- this should work but gives syntax error! ); END
View Replies !
Is It Possible To Re-reference A Column Alias From A Select Clause In Another Column Of The Same Select Clause?
Example, suppose you have these 2 tables(NOTE: My example is totally different, but I'm simply trying to setupthe a simpler version, so excuse the bad design; not the point here)CarsSold {CarsSoldID int (primary key)MonthID intDealershipID intNumberCarsSold int}Dealership {DealershipID int, (primary key)SalesTax decimal}so you may have many delearships selling cars the same month, and youwanted a report to sum up totals of all dealerships per month.select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',sum(cs.NumberCarsSold) * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDMy question is, is there a way to achieve something like this:select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',TotalCarsSoldInMonth * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDNotice the only difference is the 3rd column in the select. Myparticular query is performing some crazy math and the only way I knowof how to get it to work is to copy and past the logic which isgetting out way out of hand...Thanks,Dave
View Replies !
Declaring A Table Variable Within A Select Table Joined To Other Select Tables In Query
Hello, I hope someone can answer this, I'm not even sure where to start looking for documentation on this. The SQL query I'm referencing is included at the bottom of this post. I have a query with 3 select statements joined together like tables. It works great, except for the fact that I need to declare a variable and make it a table within two of those 3. The example is below. You'll see that I have three select statements made into tables A, B, and C, and that table A has a variable @years, which is a table. This works when I just run table A by itself, but when I execute the entire query, I get an error about the "declare" keyword, and then some other errors near the word "as" and the ")" character. These are some of those errors that I find pretty meaningless that just mean I've really thrown something off. So, am I not allowed to declare a variable within these SELECT tables that I'm creating and joining? Thanks in advance, Andy Select * from ( declare @years table (years int); insert into @years select CASE WHEN month(getdate()) in (1) THEN year(getdate())-1 WHEN month(getdate()) in (2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12) THEN year(getdate()) END select u.fullname , sum(tx.Dm_Time) LastMonthBillhours , sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) lasmosbillingpercentage from Dm_TimeEntry tx join systemuserbase u on (tx.owninguser = u.systemuserid) where Month(tx.Dm_Date) = Month(getdate())-1 and year(dm_date) = (select years from @years) and tx.dm_billable = 1 group by u.fullname ) as A left outer join (select u.FullName , sum(tx.Dm_Time) Billhours , ((sum(tx.Dm_Time)) / ((day(getdate()) * ((5.0)/(7.0))) * 8)) perc from Dm_TimeEntry tx join systemuserbase u on (tx.owninguser = u.systemuserid) where tx.Dm_Billable = '1' and month(tx.Dm_Date) = month(GetDate()) and year(tx.Dm_Date) = year(GetDate()) group by u.fullname) as B on A.Fullname = B.Fullname Left Outer Join ( select u.fullname , sum(tx.Dm_Time) TwomosagoBillhours , sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) twomosagobillingpercentage from Dm_TimeEntry tx join systemuserbase u on (tx.owninguser = u.systemuserid) where Month(tx.Dm_Date) = Month(getdate())-2 group by u.fullname ) as C on A.Fullname = C.Fullname
View Replies !
Select For Cursor Returns 0 Same Select Highlighted Returns 2,000+
Grrr!I'm trying to run a script:print 'Declaring cursor'declare cInv cursor forward_only static forselectdistinctinv.company,inv.contact,inv.address1,inv.city,inv.state,inv.postalcode,inv.cmcompanyidfromdedupe.dbo.ln_invoice as invleft joindedupe.dbo.customerid as cidondbo.fnCleanString(inv.company) = cid.searchcowhere((inv.customerid is nulland cid.searchco is null)and (inv.date >= '01/01/2003' or (inv.date < '01/01/2003' andinv.outstanding > 0.01))and not inv.company is null)print 'Cursor declared'declare@contact varchar(75),@company varchar(50),@address1 varchar(75),@city varchar(30),@state varchar(20),@zip varchar(10),@cmcompanyid varchar(32),@iCount int,@FetchString varchar(512)open cInvprint 'cursor opened'fetch cInv into@company,@contact,@address1,@city,@state,@zip,@cmc ompanyidprint 'Cursor fetched @@Cursor_rows = ' + cast(@@cursor_rows asvarchar(5))All the prints are there to help me figure out what's going on!When I get to the Print 'Cursor fetched @@cursor_rows....the value is 0 and the script skips down to the close and deallocate.BUT, if I just highlight the Select...When section, I get over 2,000rows. What am I missing?Thanks.
View Replies !
|
TRACKER
