Char Data Type Conversion

Sep 11, 2006

im trying to convert char (18) data type to decimal (18,6) but it wont let me do it. It gives an arithematic error. what would be other way to solve this problem. Can i do it with float if yes how so? or any other suggested way. Thanks

View 6 Replies


ADVERTISEMENT

Index Creation Causes Error The Conversion Of A Char Data Type To A Datetime Data Type Resulted...

Jul 23, 2005

Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!

View 1 Replies View Related

System.Data.SqlClient.SqlException: The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.

Dec 14, 2005

After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.

System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.

Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.

At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.

anyone having this problem before?? hopefully you guys can help.

Thanks,

View 4 Replies View Related

Data Type Conversion - Numeric To Char

Jul 12, 2000

I would like to know how to translate a numeric value = 3 to a text or char value = 03.

Any input would be appreciated.

Thanks,


Joel

View 1 Replies View Related

The Conversion Of A Char Data Type To A Datetime Data Type!!

May 13, 2008

hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
 
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration

Partial Class Admin_emag_insert
Inherits System.Web.UI.Page

Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now

End Sub

Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub

Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String

'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text

ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString

'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"

'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()

AddMessage.Text = "A new emagazine was added successfully"

Me.VersionTextBox.Text = ""

End Sub
End Class
 

View 10 Replies View Related

Getting Error : : The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value

Jan 28, 2008

update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?

View 5 Replies View Related

The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.

Apr 19, 2008

Advance thanks ....... My table is  TimeSheet:-----------------------------------  CREATE TABLE [dbo].[TimeSheet](    [autoid] [int] IDENTITY(1,1) NOT NULL,    [UserId] [int] NOT NULL,    [starttime] [datetime] NOT NULL,    [endtime] [datetime] NOT NULL,    [summary] [nvarchar](50) NOT NULL,    [description] [nvarchar](50) NULL,    [dtOfEntry] [datetime] NOT NULL,    [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution  

View 5 Replies View Related

The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.

Aug 3, 2005

Hey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards

View 6 Replies View Related

The Conversion Of Char Data Type To Smalldatetime Data Type Resulted In An Out-of-range Smalldatetime Value

Mar 30, 2007

I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.



I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.

The code I'm using is:



Dim sqlcommand As New SqlCommand _

("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)



Try

conn.Open()

sqlcommand.ExecuteNonQuery()

conn.Close()

Catch ex As Exception

MessageBox.Show(ex.Message)

End Try



This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.



The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.

Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?













View 1 Replies View Related

Bulk Insert Task Failing On Data Type Conversion For A Destination Column Of Type Bit

Jul 6, 2006

I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.

I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.

I hope someone can help me work through this.

Thanks in advance,

SK



SSIS package "Package3.dtsx" starting.

Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".

Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".

Task failed: Bulk Insert Task 1

Task failed: Bulk Insert Task

Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.

SSIS package "Package3.dtsx" finished: Failure.

View 5 Replies View Related

Trans Replication With Updating Subscriber On Sql2000 (single Quote In The Data As Char Data Type)

Nov 17, 2006

Hi,

I am trying to setup Trans Replication with updating subscriber on sql2000. One column on few tables got data with single quote (').

How do I handle in this case? Did any one come across such case?

Can I Change default QUOTED IDENTIFIER from ' (single quote) to something else (@@@) on SQL2000?

If yes, how to do?

Thanks
mka

View 1 Replies View Related

Changing Data Type From Char To Datetime

Mar 2, 2007

Thanks in adance

Platform: SQL 2000

A SQL table has a field named "pay-day" with Char(8) data type.

I tried to change its data type to datetime but only with an error message like this. I did right-click the table and tried to modify a data type.

- Unable to modify table.
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
The statement has been terminated.

Jay

View 4 Replies View Related

Help With Data Type Conversion !!!

May 9, 2008

Hi all,

I have 2 conversion related to same table.

a) Date:
I have a table called Table1. It has a field called HDate(nvarchar type). The records are like this;
HDate
H01042008
H01082008
H01102006
H01112008

Each records always start with an H charatcter, the remaining characters always represents date in the format of DDMMYYY.
I want to convert this format into the date format of YYYYMMDD. So once coverted, the record should be as follows;
HDateConverted
2008-04-01
2008-08-01
2006-10-01
2008-11-01

b) In the same table I have another field called NoID of nvarchar type. The records are like this;
NoID
00.
000
001
002
003
004
005
006
007
008
010

I want to convert it to Integer. Once converted the records for above example should be like this;
NoIDConverted
0
0
1
2
3
4
5
6
7
8
10

How can I solve both these conversions?..
Thanks a million for your qucik help.

Zee

View 10 Replies View Related

Conversion Of Int Data Type Error?!

Nov 6, 2007

 Hi,I keep getting the error:System.Data.SqlClient.SqlException: Conversion failed when converting the varchar value '@qty' to data type int. When I initiate the insert and update.I tried adding a: Convert.ToInt32(TextBox1.Text), but it didn't work.. Could someone help?My code:private bool ExecuteUpdate(int quantity){  SqlConnection con = new SqlConnection();  con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True";  con.Open();  SqlCommand command = new SqlCommand();  command.Connection = con;  TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1");  Label labname = (Label)FormView1.FindControl("Label3");  Label labid = (Label)FormView1.FindControl("Label13");  command.CommandText = "UPDATE Items SET Quantityavailable = Quantityavailable - '@qty' WHERE productID=@productID";  command.Parameters.Add("@qty", TextBox1.Text);  command.Parameters.Add("@productID", labid.Text); command.ExecuteNonQuery();  con.Close();  return true;}    private bool ExecuteInsert(String quantity)    {        SqlConnection con = new SqlConnection();        con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True";        con.Open();        SqlCommand command = new SqlCommand();        command.Connection = con;        TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1");        Label labname = (Label)FormView1.FindControl("Label3");        Label labid = (Label)FormView1.FindControl("Label13");        command.CommandText = "INSERT INTO Transactions (Usersname,Itemid,itemname,Date,Qty) VALUES (@User,@productID,@Itemsname,@date,@qty)";         command.Parameters.Add("@User", System.Web.HttpContext.Current.User.Identity.Name);        command.Parameters.Add("@Itemsname", labname.Text);        command.Parameters.Add("@productID", labid.Text);        command.Parameters.Add("@qty", Convert.ToInt32(TextBox1.Text));        command.Parameters.Add("@date", DateTime.Now.ToString());        command.ExecuteNonQuery();        con.Close();        return true;    }protected void Button2_Click(object sender, EventArgs e){  TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox;  ExecuteUpdate(Int32.Parse(TextBox1.Text) );}protected void Button2_Command(object sender, CommandEventArgs e)    {        if (e.CommandName == "Update")        {            TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox;            ExecuteInsert(TextBox1.Text);        }    }  Thanks so much if someone can!Jon 

View 33 Replies View Related

Data Type Conversion Problems Using DTS

Mar 13, 2001

I am trying to execute a custom DTS package i made using VB. The SQL datatypes that I am using are short, VarChar and Single in SQL. Would anybody happen to know the equivalent data types in MSAccess 97?

View 1 Replies View Related

Data Type Conversion Issue

May 27, 2008

Im running the following join on derived/real tables. I get 18 rows when I run query1 mentioned below & I get 122 rows in query 2.
Column, id is nvarchar & column membernumber is INT. Im converting nvarchar to INT ...but it is still not fetching desired results..

Thanks
Anil Kumar.

Query1--

select isnull(ea.id,0) , coalesce(sum(ea.earn),0) ,
coalesce(B.membernumber,0) , coalesce(B.RecruitingBonus,0)
from [hqvm03hqsqlinst05].sdk.dbo.DecBonusPaidSPBN Ea
left outer join
(select A.Membernumber, A.RecruitingBonus from
(select bb.beenumber as MemberNumber, sum(pc.RecruitingBonusMTD) as RecruitingBonus
from beebusiness bb
join probucketamount pc on pc.beebusinessguid = bb.beebusinessguid
join beeentity be on be.beeentityguid = bb.beeentityguid
where pc.RecruitingBonusMTD != 0 group by bb.beenumber)A)B
--
on B.Membernumber = ea.id
--
where ea.earn != 0 or b.RecruitingBonus != 0
group by isnull(ea.id,0), coalesce(B.membernumber,0), coalesce(B.RecruitingBonus,0)


Query 2--

select isnull(ea.id,0) , coalesce(sum(ea.earn),0) ,
coalesce(B.membernumber,0) , coalesce(B.RecruitingBonus,0)
from [hqvm03hqsqlinst05].sdk.dbo.DecBonusPaidSPBN Ea
left outer join
(select A.Membernumber, A.RecruitingBonus from
(select bb.beenumber as MemberNumber, sum(pc.RecruitingBonusMTD) as RecruitingBonus
from beebusiness bb
join probucketamount pc on pc.beebusinessguid = bb.beebusinessguid
join beeentity be on be.beeentityguid = bb.beeentityguid
where pc.RecruitingBonusMTD != 0 group by bb.beenumber)A)B
--
on B.Membernumber = convert(int, ea.id)
--
where ea.earn != 0 or b.RecruitingBonus != 0
group by isnull(ea.id,0), coalesce(B.membernumber,0), coalesce(B.RecruitingBonus,0)

View 4 Replies View Related

Implicit Conversion Of Data Type

Oct 3, 2006

Dear all,

Hi, I'm using this code to export record from sql to excel and i got this error message "Implicit conversion from data type text to nvarchar is not allowed. use the convert function to run this query"

Excel file is already created columns in the view and excel file are the same and cell format of the excel is converted to text.

--- code used
insert into OPENROWSET('Microsoft.Jet.OLEDB.4.0',
'Excel 8.0;Database=c:filename.xls;',
'SELECT * FROM [filename$]') select * from ViewName

thanks,

View 6 Replies View Related

Data Type Conversion Problem

Oct 28, 2006

I am not sure if this is the right place to post, although I am new to SQL Server.

I upsized a database from MS Access to SQL Server 2005 on my local machine. I am trying to change the primary key from int to uniqueidentifier, but I get this error: "conversion from int to uniqueidentifier is not supported on the connected database server". I have tried googling around to see if anyone has posted an answer, but haven't found a solution. I have also tried detaching the database, but that doesn't help either.

Can someone help me understand what the error is meaning by "connected database server", and how I can make it possible to change the data type?

Thank you.

Ben

View 5 Replies View Related

Data Type Conversion Issue

Oct 3, 2006

Hi guys
I exported some data from a text file to sql server. Here is the sample data..



This table has about 2 million rows.There is a date field in the table which comes as a 'nvarchar' in sql .When i try to convert it to a 'datetime' , i get an error as operation timed out..



Here is the data from the text file...

Date dispensed Outliers Formulation ID Provider Number (dispensing) NSS flag Patient category Units dispensed Total days supply
1/01/2006 12:00:00 a.m. normal 106509.00 7952 I A 120.00 30.00
1/01/2006 12:00:00 a.m. normal 106509.00 8208 I A 360.00 90.00
1/01/2006 12:00:00 a.m. normal 106509.00 9460 I A 120.00 30.00
1/01/2006 12:00:00 a.m. normal 106509.00 10184 I A 120.00 60.00
1/01/2006 12:00:00 a.m. normal 106509.00 10291 I A 120.00 60.00
1/01/2006 12:00:00 a.m. normal 106509.00 11149 I A 120.00 30.00
1/01/2006 12:00:00 a.m. normal 106509.00 11294 I A 120.00 60.00
1/01/2006 12:00:00 a.m. normal 106509.00 11777 I A 120.00 30.00
1/01/2006 12:00:00 a.m. normal 106509.00 12048 I A 120.00 30.00



I have tried the bulk insert as well.

Here is the script for the create table ..



USE [Library]

GO

/****** Object: Table [dbo].[tablename] Script Date: 10/03/2006 14:45:59 ******/

SET ANSI_NULLS ON

GO

SET QUOTED_IDENTIFIER ON

GO

CREATE TABLE [dbo].[NormalOutlier1](

[Datedispensed] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,

[Outliers] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,

[Formulation ID] [float] NULL,

[Provider Number (dispensing)] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,

[NSS flag] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,

[Patient category] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,

[Units dispensed] [float] NULL,

[Total days supply] [float] NULL

) ON [PRIMARY]







Hope this helps

View 8 Replies View Related

T-sql Data Type Conversion Error Handling

Jun 21, 2001

I'm trying to convert a column from a varchar(14) to float, some of the rows contain some non-numeric characters. I've tried to write a cursor to step through the records, run cast(col1 as float) on each record, then use if @@error <> 0 to capture an error but it doesn't work. It steps through fine but when the cast command fails it ends the execution of the script with "Error converting data type varchar to float."

How can i capture this error without having the script fail? Is there another way to get this done?

Thanks,

Jim

View 1 Replies View Related

Date Data Type-Conversion Error.

Jun 22, 2006

Dear friends,

I am struggling to insert a date value in "dd-mm-yyyy" format to SQL server table having datatype as Date/Time.

Regional date setting for Server and Local systems are in dd-mm-yyyy format.


I am using following code

Dim DT As String
DT = Now()
DT = Format(DT, "MM/DD/YYYY")

for the inserting into table using command

ins_comm.CommandText = " INSERT INTO CARD (doe) values("& DT &")"

Procedure will end without any error ,but stored value for the date feild will be garbage value like 1900-01-01.

But if i used mm-dd-yyyy format ,it will get inserted.

What could be the reason,How I can save value in dd-mm-yyyy or dd-mm-yy format

Please help!!!


Graceson Mathew

View 1 Replies View Related

Data Type Conversion In Stored Procedure

Aug 2, 2006

Hi,

I have a stored procedure a portion of which looks like this:


IF (CAST (@intMyDate AS datetime)) IN (
SELECT DISTINCT SHOW_END_DATE
FROM PayPerView PP
WHERE PP_Pay_Indicator = 'N' )
BEGIN
--ToDo Here
END


where:
@intMyDate is of type int and is of the form 19991013
SHOW_END_DATE is of type datetime and is of the form 13/10/1999

however when I run the procedure in sql query analyzer as:

EXEC sp_mystoredproc param1, param2

i get the error:


Server: Msg 242, Level 16, State 3, Procedure usp_Summary_Incap, Line 106
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.


what is the proper way of doing the conversion from int to datetime in stored procedure?

thank you!

cheers,
g11DB

View 11 Replies View Related

Conversion Failed Because The Data Value Overflowed The Specified Type

Apr 29, 2008

Hi All,

I am facing very weird issue...

When i am running package thru SQL server job and getting follwing error:

SIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
There was an error with input column "Billing_date" (2568) on input "OLE DB Destination Input" (979). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (979)" failed because error code 0xC020907A occurred, and the error row disposition on "input "OLE DB Destination Input" (979)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "billing_table" (966) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029.

In the package, i am selecting data from SQL Server database into query(billing_table) and inserting data using destination task into SQL server table(stg_billing_table). Both table has same data type datetime for Billing_date.

Here are couple of points:

1) When i am trying to execute same insert statement thru SQL Server editor, it is running successfully.

INSERT INTO stg_billing_table (Billing_date)
SELECT Billing_date FROM stg_billing_table;

2) When I am running package from Solution explorer then also it works fine.

Issue only comes when i try to run package thru SQL server job. one point, There are lot of other task running parallel to this package when we run thru JOB.

One more thing which i have observed that when i tried to see input transformation datatype for same column in package, it is DT_DATABASETIMESTAMP. Well i am not able to understand that it may be potential issue because if it is related to DT_DATABASETIMESTAMP to date time conversion then we should have faced this issue while running thru solution IDE.

Issue looks related to database level buffer/ Memory overflow etc. to me. Can somebody help me understanding the issue?

Thanks.

View 8 Replies View Related

Data Type Conversion .. Varchar To GUID

Jul 31, 2006

Hi,

I have a parameter @name varchar(50)

but the table has a field with datatype GUID

how I can convert varchar to guid before insertion...

Thanks

View 1 Replies View Related

Conversion Failed Because The Data Value Overflowed The Specified Type

Nov 9, 2007

Hi all,

I have a problem while transforming data from an Access DB to an SQL 2005 DB.

Context:

- Migration of packages from SQL 2000 to SQL 2005
- DB SQL 2005 is a back up from SQL 2000
- The access DB is the same than the one used with SQL 2000

Error:

[OLE DB Source [1]] Error: There was an error with output column "ID" (32) on output "OLE DB Source Output" (11). The column status returned was: "Conversion failed because the data value overflowed the specified type.".

Access Source:



tblSource


ID
DateID
ConfigIDRequest
FromTime
ToTime


43221
01.01.2007
362
00.00
05.30

43233
01.01.2007
362
21.10
23.59

43234
01.02.2007
362
00.00
05.30

43244
01.02.2007
362
21.10
23.59

43247
01.03.2007
362
00.00
05.30

...

SQL Destination:





Destination table
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[tblDestination](
[ID] [int] NOT NULL,
[DateID] [nvarchar](10) NULL,
[ConfigIDRequest] [int] NULL,
[FromTime] [nvarchar](5) NULL,
[ToTime] [nvarchar](5) NULL
) ON [PRIMARY]


SSIS Package description:

- Control Flow:

* Data Flow Task
- Data Flow:

* OLE DB Source pointing to tblSource, using AccessCon
* OLE DB Destination pointing to tblDestination, using SQL2005Con
- Connections:

* AccessCon : Native OLE DBMicrosoft Jet 4.0 OLE DB Provider pointing to AccessSource.mdb
* SQL2005Con : Native OLE DBMicrosoft OLE DB Provider for SQL Server

NB: All those components are default configured

Previous tests executed:

1. OLE DB Source Preview : OK, same records.
2. Error redirection to flat file for ID column : here are the first records




ErrorOutput.txt
ErrorCode,ID,DateID,ConfigIDRequest,FromTime,ToTime, ErrorColumn
-1071607691,43221,01.01.2007,362,00.00,05.30,32
-1071607691,43222,01.01.2007,363,05.30,05.50,32
-1071607691,43223,01.01.2007,366,05.50,06.20,32
-1071607691,43224,01.01.2007,370,06.20,12.20,32
-1071607691,43225,01.01.2007,365,12.20,13.00,32


3. Execute the transformation on the SQL2000 server, for the same Access DB, to the initial SQL 2000 DB : OK, no error.


Questions:

- Do you have an idea of what differs between SQL2000 and SQL2005 in this kind of situation?
- Why is this working for 2000 and not 2005?
- Why the error message says "output column "ID" (32) on output "OLE DB Source Output" (11). ". Shouldn't it be something like "output column "ID" (32) on input "ID" (11). " (with the second ID column for the SQL DB).
- May be the error comes from my connections parameters, one parameter which doesn't exists in SQL2000?

Thanks,

Romain

View 6 Replies View Related

Conversion Failed When Converting The Nvarchar Value '3,4' To Data Type Int.

Jun 1, 2008

i am getting this error when passing multiple checkbox values to next page..
 Error is Conversion failed when converting the nvarchar value '3,4' to data type int.
my code is below
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:mobiletimesConnectionString %>"
SelectCommand = "SELECT * FROM [device] WHERE [dev_id] IN (@chk1)">
<SelectParameters>
<asp:FormParameter FormField="chk1" Name="chk1" />
</SelectParameters>
</asp:SqlDataSource><asp:DataList ID="DataList1" runat="server" DataSourceID="SqlDataSource1"
BackColor="White" BorderColor="#CC9966" BorderStyle="None" BorderWidth="1px"
CellPadding="4" GridLines="Both">
<FooterStyle BackColor="#FFFFCC" ForeColor="#330099" />
<ItemStyle BackColor="White" ForeColor="#330099" />
<SelectedItemStyle BackColor="#FFCC66" Font-Bold="True" ForeColor="#663399" />
<HeaderStyle BackColor="#990000" Font-Bold="True" ForeColor="#FFFFCC" />
<ItemTemplate><div class="overviewpdamain" >
<div class="overviewpdadevice">
<center>
<b><%#Eval("dev_name")%></b><br />
<b>
</b>
</center></div>
</div></ItemTemplate>
</asp:DataList>

View 6 Replies View Related

Implicit Conversion From Data Type Datetime To Int Is Not Allowed.

Apr 25, 2005

Here is the situation...

I am using SQL Server 2000.  I have created a Store Procedure to
insert information, 4 of the fields are date types.  I am using
OleDb Data Provider (System.Data.OleDb) namespace.

The dates are filled by a form (web form) on submit event, I created a
class that has functions to create my OleDb Parameters.  I add the
parameters to the command and execute it through a SQL Server Stored
Procedure.  In the event that I must have coded something wrong, I
tested in the SQL Query Analyzer and the IN parameters for the date I
used the getDate() method.  This is where I know it is OleDb and
SQL Server Parameters.

What Converstion Format should I use in the SP for the date? 
OleDb.date are doubles from some date in 1979 or something or
another.  So I used an OleDbDataType.DBDate.  It seems that
when the Stored Procedure uses the IN Parameters dates provided by
OleDbDataType.Date or DBDate, that it doesn't like the int
format.  I am guessing that I am not converting the date in the
parameters in the Insert of the Store Procedure... this is basically
what I have...

Function to add parameters and execute SP

private int _startdate = DateTime.Now;
private int _finishdate = DateTime.Now.AddDays(30);

OleDbParameter[] myParams = {
ParamBuilder("@StarDate", OleDbType.DBDate, 8, _startdate),
ParamBuilder("@FinishDate", OleDbType.DBDate, 8, _finishdate)
};

ExecuteNonQuery("myInsert", myParams);

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

CREATE PROCEDURE myInsert
@StartDate datetime, @FinishDate datetime AS

INSERT INTO myTable (STARTDATE, FINISHDATE)
VALUES (Convert(datetime, @StartDate), Convert(datetime, @FinishDate))

Please keep in mind that I am using System.Data.OleDb
namespace.....  please don't tell me to use SQLClient, it seems
since I've been so adaptive of using OleDb, that it sould work just as
well.  I am way too far into this to change my Provider to SQL
Client, but I promise myself that the next project (if using SQL
Server, I will be using SQLClient and I will keep using OleDb for
Oracle.) *sigh*

Help!

View 1 Replies View Related

Conversion Failed When Converting The Varchar Value To Data Type Int.

Sep 28, 2006

Table:Student
Name nvarchar(1000)
Status int

In the stored procedure - I have got a string which contains comma separated Status Values such as

DECLARE @validStatus = '1000,1001,1002'

I want to return the count of students having the status code as in @validStatus

SELECT count(1) FROM Student WHERE Status in (@validStatus)

But the above statement is erroring out with

Conversion failed when converting the varchar value '1000,1001,1002' to data type int.

Any help/suggestion appreciated.

Thanks,
Loonysan

View 14 Replies View Related

Conversion Failed When Converting The Varchar Value To Data Type Int.

May 27, 2008

Hi guys,

My query was working fine until I added the yellow highlighted areas below.
Basically what I'm doing with this is getting the lowest open purchase order number (docnum) and its matching docduedate.
Now when I run it I get

Conversion failed when converting the varchar value 'po_num' to data type int.

Any ideas? Thanks!


SELECT t3.product ,

t7.itemname ,

t2.u_vlgx_plc,

t3.shorted ,

t4.onhand ,

MIN(

CASE

WHEN t8.linestatus = 'O'

THEN t9.docnum

ELSE NULL

END) po_num,

t10.docduedate





FROM

(SELECT t0.product product ,

SUM(

CASE

WHEN t0.qty_topick <> t0.qty_picked

THEN t0.qty_topick - t0.qty_picked

ELSE 0

END) shorted

FROM rbeacon.dbo.shipline2 t0

INNER JOIN rbeacon.dbo.shiphist t1

ON t0.packslip = t1.packslip

WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-1, 101)

GROUP BY t0.product

) t3

INNER JOIN comparison.dbo.vlgxplc t2

ON t2.itemcode = t3.product COLLATE Latin1_General_CI_AS

LEFT JOIN

(SELECT t0.product AS product,

SUM(t0.quantity) AS onhand

FROM rbeacon.dbo.binlocat t0

GROUP BY t0.product

) t4

ON t3.product = t4.product

INNER JOIN wbau.dbo.oitm t5

ON t3.product = t5.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.ocrd t6

ON t5.cardcode = t6.cardcode

INNER JOIN wbau.dbo.oitm t7

ON t3.product = t7.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.por1 t8

ON t3.product = t8.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.opor t9

ON t8.docentry = t9.docentry

LEFT JOIN comparison.dbo.podatetest('po_num') t10

ON t10.docnum = t9.docnum



WHERE t3.shorted <> 0

GROUP BY t3.product ,

t7.itemname ,

t2.u_vlgx_plc,

t3.shorted ,

t4.onhand ,

t6.cardname,

t10.docduedate

ORDER BY t2.u_vlgx_plc,

t6.cardname ,

t3.product

View 14 Replies View Related

Conversion Failed When Converting The Nvarchar Value Xxxxxxxx To Data Type Int

Sep 4, 2007

I am using Sql server 2005, Asp.net 2.0. In my application i have to store a mobile number in database, and in table it is declared as nvarchar(50) (datatype). In stored procedure as it is nvarchar(50). In my code , stored procedure is called in a function. In that while executing project error is coming as (cmd.ExecuteNonQuery)
Conversion failed when converting the nvarchar value xxxxxxxxx to data type int.
Kindly give your suggestions to solve this problem.

View 10 Replies View Related

SQL 2012 :: Implicit Conversion From Data Type Datetime To Int Not Allowed

Mar 18, 2014

I have code below not working in SQL 2012

declare @d1, @d2, @d3 datetime
...where @d1 between (@d2-15) and (@d3 + 15)

Error:

Implicit conversion from data type datetime to int is not allowed. Use the CONVERT function to run this query...

View 2 Replies View Related

Conversion Failed When Converting Varchar Value Times To Data Type Int

Feb 10, 2015

I try to compile your query, and prompt error message in below 'conversion failed when converting the varchar value 'times' to data type int .Error code 245.

select
user_member
, sum(case when trx_date > dateadd(month, -3, getdate()) then 1 else 0 end) + ' times'
, max(case when trx_date < dateadd(month, -3, getdate()) then trx_date else NULL end)
from trx_hdr
group by user_member

View 1 Replies View Related

Transact SQL :: Conversion Failed When Converting Varchar Value NHS To Data Type Int

Sep 3, 2015

CASE WHEN NULLIF(NHSNo2, '') IS NULL THEN 1
WHEN NULLIF(Surname, '') IS NULL THEN 2
WHEN NULLIF(Forename, '') IS NULL THEN 3
WHEN NULLIF(DOB, '') IS NULL OR DOB < '01/01/1900' THEN 4
WHEN NULLIF(AddressLine1, '') IS NULL THEN 5

[code]...

The above code worth great but ideally instead of returning a number Id like to return text for example

1 = NHS
2= SUR
3=FOR
4=DOB
5=ADD
6=PCO
7=GPN
8=PCZ
9=GPD
10=CCG

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved