Error Creating Assembly

Mar 12, 2008



I encountered something strange, deploying the following assemblies


CREATE ASSEMBLY [Sentry]

AUTHORIZATION [dbo]

FROM 'c:clrSentry.dll'

WITH PERMISSION_SET = EXTERNAL_ACCESS;

GO


CREATE ASSEMBLY [Sentry.XmlSerializers]

AUTHORIZATION [dbo]

FROM 'C:clrSentry.XmlSerializers.dll'

WITH PERMISSION_SET = SAFE;

GO



Sentry.XmlSerializers errored out with:
Msg 6218, Level 16, State 2, Line 2
CREATE ASSEMBLY for assembly 'Sentry.XmlSerializers' failed because assembly 'Sentry.XmlSerializers' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
[ : Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializerContract::CanSerialize][mdToken=0x600006e][offset 0x00000001][token 0x01000019]System.TypeLoadException: Could not load type 'Sentry.SentryDataService.SentryDataService' from assembly 'Sentry, Version=1.0.2764.18017, Culture=neutral, PublicKeyToken=null'. Type load failed.


The interesting thing is that when I deploy this locally on my machine, there are no problems whatsoever. Using sp_configure the servers appear to be set up the same way. The database also has trustworthy set on for both.

Anything, I could be missing? Thanks

View 8 Replies


ADVERTISEMENT

ALTER ASSEMBLY Error Msg 6509 An Error Occurred While Gathering Metadata From Assembly ‘&&<Assembly Name&&>’ With HRESULT 0x1.

Feb 22, 2008

I work with February CTP of SqlServer 2008.
I have an Assembly with several UDTs inside. Version of assembly is 1.0.*
I use CREATE ASSEMBLY statement to register this assembly, and it runs without any errors. Then I rebuild CLR solution without doing any changes in source code. In that case the only difference between new and old assemblies is version (difference in fourth part of version).
Then I try to update assembly in SqlServer. I use
ALTER ASSEMBLY <name>
FROM <path>
WITH PERMISSION_SET = UNSAFE, UNCHECKED DATA
statement for this. Statement runs with error:
Msg 6509An error occurred while gathering metadata from assembly €˜<Assembly name>€™ with HRESULT 0x1.
I found the list of condition for ALTER ASSEMBLY in MSDN:
ALTER ASSEMBLY statement cannot be used to change the following:
· The signatures of CLR functions, aggregate functions, stored procedures, and triggers in an instance of SQL Server that reference the assembly. ALTER ASSEMBLY fails when SQL Server cannot rebind .NET Framework database objects in SQL Server with the new version of the assembly.
· The signatures of methods in the assembly that are called from other assemblies.
· The list of assemblies that depend on the assembly, as referenced in the DependentList property of the assembly.
· The indexability of a method, unless there are no indexes or persisted computed columns depending on that method, either directly or indirectly.
· The FillRow method name attribute for CLR table-valued functions.
· The Accumulate and Terminate method signature for user-defined aggregates.
· System assemblies.
· Assembly ownership. Use ALTER AUTHORIZATION (Transact-SQL) instead.
Additionally, for assemblies that implement user-defined types, ALTER ASSEMBLY can be used for making only the following changes:
· Modifying public methods of the user-defined type class, as long as signatures or attributes are not changed.
· Adding new public methods.
· Modifying private methods in any way.

But I haven€™t done any changes in source code, so new version of assembly satisfies all this conditions.
What could be the reason for such behavior?
P.S. I€™ve got the same error, if I add or change any method in assembly before rebuilding.

View 9 Replies View Related

Error While Creating Assembly

Apr 12, 2007

I am trying to create an assembly on a sql server 2005 machine but it gives me following error:


Msg 33009, Level 16, State 2, Line 2
The database owner SID recorded in the master database differs from the database owner SID recorded in database 'XYZ'. You should correct this situation by resetting the owner of database 'XYZ' using the ALTER AUTHORIZATION statement.



I tried using the alter authorization statement to change the owner.
It did not work.

I am able to create same assembly on another test database but can not create it on this database.

Is this because of orphan logins?

Thanks for the help.

Harshal.

View 4 Replies View Related

Error While Creating Assembly

Apr 12, 2007

I am trying to create an assembly on a sql server 2005 machine but it gives me following error:


Msg 33009, Level 16, State 2, Line 2
The database owner SID recorded in the master database differs from the database owner SID recorded in database 'XYZ'. You should correct this situation by resetting the owner of database 'XYZ' using the ALTER AUTHORIZATION statement.



I tried using the alter authorization statement to change the owner.
It did not work.

The same assembly is created on another test database but can not create it on this database.

Is this because of orphan logins?

Thanks for the help.

Harshal.

View 6 Replies View Related

Creating A System.Management Assembly In Order For My Own Assembly To Work?

Aug 2, 2006

Hi

I am a bit paranoid about what I just did to my SQL Server 2005 with this CLR experiment.

I created a Class Lib in C# called inLineLib that has a class Queue which represents an object with an ID field.

in another separate namespace called inLineCLRsql, I created a class called test which will hold the function to be accessed from DB, I referenced and created an instances of the Queue class, and retrieve it's ID in a function called PrintMessage.

namespace inlineCLRsql{


public static class test{


public static void PrintMessage(){



inLineLib.Queue q = new inLineLib.Queue();

int i = q.queueId ;

Microsoft.SqlServer.Server.SqlContext.Pipe.Send(i.ToString());



}

}

}

to access this from the db, I attempted to create an assembley referencing inLineCLRsql.dll. This didn't work as it complained about inLineLib assembly not existing in the db. I then attempted to create an assembley for inLineLib but it barfed saying System.Management assembly not created.

so what I did is (and this is where I need to know if I just ruined sql server or not):

1- ALTER DATABASE myDB SET TRUSTWORTHY ON;.

2- CREATE ASSEMBLY SystemManagement

FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727System.Management.dll'

WITH PERMISSION_SET = UNSAFE

3- CREATE ASSEMBLY inLineLibMaster

FROM 'D:inLineServerinLineLibinDebuginLineLib.dll'

WITH PERMISSION_SET = unsafe

4- and finally

CREATE ASSEMBLY inLineLib

FROM 'D:inLineServerCLRSQLinlineCLRsqlinDebuginlineCLRsql.dll'

WITH PERMISSION_SET = SAFE



Everything works after those steps (which took some trial and error). I can create a sproc like:

CREATE PROC sp_test AS

EXTERNAL NAME inLineLib.[inlineCLRsql.test].PrintMessage

and it returns the Queue ID

Is there anything unadvisable about the steps above?



Thanks for your help



M



View 1 Replies View Related

Severe Error Occurring When Creating Assembly With External Access Permission

Jul 11, 2006

I had created a CLR function in my db and was able to execute it successfully a couple of months ago. But when I tried to execute it today it was throwing errors saying there was something wrong with the permissions on the assembly. So I decided to drop everything and recreate it except I can not longer create the assembly with EXTERNAL ACCESS permissions. Whenever I try to create the assembly I get the followng error:

Msg 0, Level 11, State 0, Line 0

A severe error occurred on the current command. The results, if any, should be discarded.

Msg 0, Level 20, State 0, Line 0

A severe error occurred on the current command. The results, if any, should be discarded.

I also tried to create the assembly with Unsafe permissions and got the same error. Does anyone know why this error would be occurring now? I tried creating the same assembly on a different SQL 2005 server and it creates successfully and can be executed successfully. Any help would be greatly appreciated!!



Thanks!

GN

View 3 Replies View Related

Error Registering Assembly Using CREATE ASSEMBLY

May 1, 2008

We have written a test CRL stored procedure to test replacing one of our complex stored procedures but can€™t get it deployed to our SQL server that hosts a mirrored configuration of our production database (very locked down). It works fine on our development instances (not very locked down). It only references the default assemblies that were added when we created the project. All it does is use Context Connection=true to get data, loops though some records and returns the data using SQLContext. CLR is enabled on SQL server, the assembly is strongly signed, and we tried deploy using the binary string with the SAFE setting.


CREATE ASSEMBLY for assembly 'SQLCLRTest2' failed because assembly 'SQLCLRTest2' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
[ : SQLCLRTest2.StoredProcedures::GetLift][mdToken=0x600001e] Type load failed.
[token 0x02000008] Type load failed.

View 8 Replies View Related

Error: CREATE ASSEMBLY For Assembly

May 31, 2007

I am trying to deploy a Database Project with Visual Studio 2005 and SQL Server 2005 Standard.
I import €œSystem.IO€? and have therefore set the permission levels to EXTERNAL_ACCESS.

I am receiving the same error message that many folks have received.

CREATE ASSEMBLY for assembly 'Images' failed because assembly 'Images' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS.
The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem. Images.

My CLR access is €œon€?

I have tried

1) From master run: GRANT EXTERNAL ACCESS ASSEMBLY to [BuiltinAdministrators].
2) From master run: GRANT EXTERNAL ACCESS ASSEMBLY to €œMy Windows Authentication ID€?.
3) Run ALTER DATABASE MYDATABASE SET TRUSTWORTHY ON
4) In Visual Studio .NET 2005 Set the permission levels to €˜external€™
5) Tried BuiltinAdministrators and my SQL Server Windows Authenticated Login ID for the ASSEMBLY OWNER.

I can compile BUT NOT DEPLOY

Any help would be greatly appreciated.
Regards Steve

View 8 Replies View Related

Creating A UDT Type With Create Assembly

Nov 27, 2006

I created a UDT Type (using MS Server Express Edition  and Visual Basic 2005 express) but I get some errors:





Msg 6556, Level 16, State 1, Line 6

CREATE TYPE failed because it could not find type 'UDTProj' in assembly 'UDTProj'.

Msg 6597, Level 16, State 1, Line 6

CREATE TYPE failed.



That is my code:



Public Structure UDT_interval

Private adresse As String

Private beginn As Date

Private ende As Date



End Structure



************in Transact-SQL

//register the UDTProj assembly

USE TestData;

CREATE ASSEMBLY UDTProj

FROM 'C:MS Visual StudioMyOutputinReleaseUDTProj.dll '

WITH PERMISSION_SET = SAFE;



// create the UDTProj type

CREATE TYPE dbo.UDTProj

EXTERNAL NAME UDTProj.[UDTProj];



or



CREATE TYPE dbo.UDT_interval

EXTERNAL NAME UDTProj.[UDT_interval];



>Msg 6556, Level 16, State 1, Line 6

CREATE TYPE failed because it could not find type 'UDT_interval' in assembly 'UDTProj'.

Msg 6597, Level 16, State 1, Line 6

CREATE TYPE failed.



can anyone help me?

Regards.

D.M

View 4 Replies View Related

Problem Creating A Function From An Assembly

Jan 5, 2007

I have compiled a dll with the following code:

Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports Microsoft.SqlServer.Server
Imports System.Data.SqlTypes

Public Class SICTrans

Public Shared Function TransSIC(ByVal inpSIC As String) As String
'Dim conn As SqlConnection = New SqlConnection("context connection=true")
Dim NewSIC, TempSIC, tempFSIC As String

If Len(NZ(inpSIC)) > 0 Then
TempSIC = NZ(inpSIC)

If Len(TempSIC) < 5 Then TempSIC = Left("00000", 5 - Len(TempSIC))

tempFSIC = Left(TempSIC, 2) + "." + Mid(TempSIC, 3, 2)

If Val(Right(TempSIC, 1)) > 0 Then

tempFSIC = tempFSIC + "/" + Right(TempSIC, 1)
End If
End If

NewSIC = tempFSIC

TransSIC = NewSIC

End Function
Public Shared Function NZ(ByVal input As String) As String
If Not (input Is Nothing) Then
Return input
Exit Function
End If
Return String.Empty

End Function
End Class

Which compiles fine...

i then use the following code to create the assembly in SQL which is fine:

USE NARD
GO
CREATE ASSEMBLY SICCodeTrans
FROM 'c:SICCodeTrans.dll'
WITH PERMISSION_SET = SAFE
GO

but when i goto create the function with the following code it wont have it!

CREATE FUNCTION TransSICCode(@inpSIC varchar)
RETURNS varchar
AS EXTERNAL NAME
SICCodeTrans.SICTrans.TransSIC
GO

It gives me the following error message

Msg 6505, Level 16, State 1, Procedure TransSICCode, Line 1
Could not find Type 'SICTrans' in assembly 'SICCodeTrans'.

Any ideas??????????

Thanks

Marek Kluczynski

View 6 Replies View Related

Problem Creating Assembly Using Other Assemblies

Mar 7, 2007

Hi,I have developed a Stored procedure to output text to a text file, after doing a lot of reading here.
I want to be able to output data to a Postgres database, to be used for web mapping. I have referenced an Assembly Npgsql.dll so I can send updates to the postgres database when my ms sql database is updated. However, after building my class library, when I try to CREATE ASSEMBLY in sql server 2005 express, it sends out a message:
Msg 10301, Level 16, State 1, Line 1
Assembly 'ClassLibrary1' references assembly 'system.drawing, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: 2(error not found)). Please load the referenced assembly into the current database and retry your request.
The error seems to be in the Npgsql.dll assembly, can anybody please shed some light on this.
I tried to load the system.drawing assembly, and can do so in Unrestricted mode. It then spits out the same problem for System.Windows.Forms.dll.
I am still very new to all of this so any help would be appreciated.
Cheers,
Jatz91.

View 1 Replies View Related

Dealing With .dll Files After Creating Assembly

Apr 10, 2006

Hi
I want to use CLR for developing database object such as stored procedures.
I have read the "Getting Started with CLR Integration" from MSDN help and successfully create my first procedure.
I create an assembly in SQLServer2005 with this code:

CREATE ASSEMBLY helloworld from 'c:helloworld.dll' WITH PERMISSION_SET = SAFE

My questions are :
How should I deal with helloworld.dll after creating Assembly?
Can I delete this file?
What should I do for uploading my application on the webserver?
Should I upload any .dll file?

View 3 Replies View Related

2005: Creating Aggregate Function From .NET Assembly

Jul 17, 2006

Hello,I am learning SQL Server 2005. I have (correctly) written in .NETassembly DemoSQLServer with aggregate function AvgNoMinMax in classDemo and I have added assembly to database DemoSQLServer. Now I needto create aggregate in SQL Server. I tried this way:CREATE AGGREGATE AvgNoMinMax(@v float) RETURNS float EXTERNAL NAME[DemoSQLServer].[DemoSQLServer.Demo].[AvgNoMinMax]Unfortunately I have error:Incorrect syntax near '.'.I don't know what's wrong. Please help.Thank you very much!/RAM/

View 1 Replies View Related

Creating A Custom Assembly - Can't Find Directory For DLL

Dec 20, 2007

Hello,

The main problem I am currently facing is that I do not have the following directory to place the DLL file: C:Program FilesMicrosoft SQL Server80ToolsReport Designer. It is the "Report Designer" part that is missing. I tried adding it, but that didn't work.

Any ideas why that is?

Thank you.

-Gumbatman

View 4 Replies View Related

Programatically Creating Dataflow Tasks Require Assembly Reference

Jan 17, 2007

Hi,

I am creating dataflow tasj using following

Imports Microsoft.SqlServer.Dts.Runtime

Imports Microsoft.SqlServer.Dts.Pipeline

Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper

These refer to Microsoft.SqlServer.DTSPipelineWrap.dll and Microsoft.SQLServer.DTSRuntimeWrap.dll. While these assemblies were already there in my dev machine I don't find these files in production enviornment for SQL server 2005. I am refering these assemblies from following path in my local machine : C:Program FilesMicrosoft SQL Server90SDKAssemblies.

How to install these assemblies in prod env, offcource one option is to copy it and then put it in GAC thru script . Why does not it gets installed while installation of SQL server 2005. Are these assemly dependent on SP1 ?

Thanks

Mohit

View 4 Replies View Related

Msg 6573 Method, Property Or Field In Assembly Is Not Static. VB.Net Assembly In SQL Server Problem

Feb 29, 2008



I am trying to get a function I created in VB 5 for Access and Excel to work in SQL 2005. I was able to update the old VB code to work in VB 2005. I compiled and made a .dll, and I was able to register the new Assembly in SQL Server. When I try to create the Function, I get an error:


CREATE FUNCTION dbo.Temperature(@FluidName char, @InpCode Char, @Units Char, @Prop1 varchar, @Prop2 varChar)

RETURNS VarChar

AS EXTERNAL NAME FluidProps.[FluidProps.FluidProperties.Fluids].Temperature


Error returned:


Msg 6573, Level 16, State 1, Procedure Temperature, Line 21

Method, property or field 'Temperature' of class 'FluidProps.FluidProperties.Fluids' in assembly 'FluidProps' is not static.



Here is the code (part of it) in the VB class:

Header:


Imports Microsoft.SqlServer.Server

Imports System.Data.SqlClient

Imports System.Runtime.InteropServices

Imports System.Security

Imports System.Security.Permissions





Namespace FluidProperties



'Option Strict Off

'Option Explicit On

Public Partial Class Fluids

Function:


Function Temperature(ByRef FluidName As Object, ByRef InpCode As Object, ByRef Units As Object, ByRef Prop1 As Object, Optional ByRef Prop2 As Object = Nothing) As Object

Call CalcProp(FluidName, InpCode, Units, Prop1, Prop2)

Temperature = ConvertUnits("-T", Units, T, 0)

End Function


If I change the Function Temperature to Static, I get an error that functions cannot be Static. Its been a long time since I created the code and am having a hard time in my older age of getting the cobwebs out to make it work.

I have no problem getting the function to work if I call it from a VB form....so what do I need to do to get it to work on data in my SQL server?

Thanks

Buck

View 20 Replies View Related

Failed To Load Expression Host Assembly. Details: StrongName Cannot Have An Empty String For The Assembly Name.

Jan 12, 2006

I previously had an ASP.NET 1.1 site running on my IIS 6.0 server (not the default website) with Reporting Services running in a subdirectory of that website.  I recently upgraded to ASP.NET 2.0 for my website and was greeted with an error when trying to view a report.  The error was very non-descript, but when I checked the server logs, it recorded the details as "It is not possible to run two different versions of ASP.NET in the same IIS process.  Please use the IIS Administration Tool to reconfigure your server to run the application in a separate process."

 

First of all, I could not figure out where and how to do this.  Secondly, I decided to try to also change the Reporting Services folders to run ASP.NET 2.0 and when I did, I was greeted with the following message when attempting to view a report:

 

"Failed to load expression host assembly. Details: StrongName cannot have an empty string for the assembly name."

Please help.

View 7 Replies View Related

Error When Trying To Create Assembly

Dec 27, 2006

Hi,

I ran the following in the management studio:

CREATE ASSEMBLY MyCLRAssembly from 'c: empMyCLRAssembly.dll'
WITH PERMISSION_SET = SAFE
Go

For some reason I get the following error:

Msg 6517, Level 16, State 1, Line 1
Failed to create AppDomain 'AdventureWorks.dbo[ddl].22'.

I tried to google this error, but couldn't find it...
I would appreciate it if someone can tell me what I'm doing wrong.

Ohad.

View 3 Replies View Related

Error: OdbcPermission In Assembly

Jun 20, 2007

Hello, I have an assembly used in a report (.rdl). The assembly enables to connect to Database via ODBC. Also, it had been signed (.snk) using the VS designer. In development platform, the following error was outputted when RUN the report (** PREVIEW is no error ** )



Error:

============================================================

'RSReportHost.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32mscorlib2.0.0.0__b77a5c561934e089mscorlib.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesRSReportHost.exe', No symbols loaded.
'RSReportHost.exe' (Managed): Loaded

'C:WINDOWSassemblyGAC_MSILSystem.Windows.Forms2.0.0.0__b77a5c561934e089System.Windows.Forms.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.

'RSReportHost.exe' (Managed): Loaded

'C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll', Skipped loading symbols. Module is optimized and the debugger option

'Just My Code' is enabled.

'RSReportHost.exe' (Managed): Loaded

'C:WINDOWSassemblyGAC_MSILSystem.Drawing2.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesReportingServicesLibrary.dll', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.Diagnostics.dll', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded

'C:WINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.

'RSReportHost.exe' (Managed): Loaded

'C:WINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll', Skipped loading symbols. Module is optimized and the debugger option

'Just My Code' is enabled.

'RSReportHost.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.Interfaces.dll', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesReportingServicesNativeClient.dll', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded

'C:WINDOWSWinSxSx86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_6b128700msvcm80.dll', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.Designer.dll', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ReportPreview.dll', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ProcessingCore.dll', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded

'C:WINDOWSassemblyGAC_MSILSystem.Web.Services2.0.0.0__b03f5f7f11d50a3aSystem.Web.Services.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.

'RSReportHost.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ProcessingObjectModel.dll', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.XmlRendering.dll', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.CsvRendering.dll', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ImageRendering.dll', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.HtmlRendering.dll', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesMicrosoft.ReportingServices.ExcelRendering.dll', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesConnDB.dll', Symbols loaded.
'RSReportHost.exe' (Managed): Loaded

'expression_host_58bcf01c1a8442c3bbe45e4c4847f210', No symbols loaded.

'RSReportHost.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Transactions2.0.0.0__b77a5c561934e089System.Transactions.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
Connection Failure.
Request for the permission of type 'System.Data.Odbc.OdbcPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
A first chance exception of type 'System.Security.SecurityException' occurred in System.Data.dll
A first chance exception of type 'System.NullReferenceException' occurred in ConnDB.dll
A first chance exception of type 'System.Security.SecurityException' occurred in System.Data.dll
Error: Failed to retrieve the required data from the DataBase.
Object reference not set to an instance of an object.
Connection Failure.
Request for the permission of type 'System.Data.Odbc.OdbcPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
The thread 0x12c8 has exited with code 0 (0x0).
The program '[3388] RSReportHost.exe: Managed' has exited with code 0 (0x0).

============================================================

Any idea for me? thanks a lot!

View 3 Replies View Related

CREATE ASSEMBLY ERROR: Msg 701

Nov 1, 2007

Hello there,

i have the following problem.

I need to get some .dll's into MS SQL-Server 2005, that i need to get a own made .dll installed.

When i try to:



Code Block
CREATE ASSEMBLY SystemWeb
FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727System.Web.dll'
WITH PERMISSION_SET = UNSAFE;




i get the following message:




Code Block
Warning: The Microsoft .Net frameworks assembly 'system.web, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=x86.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.enterpriseservices, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=x86.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.runtime.remoting, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.design, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Msg 701, Level 17, State 13, Line 1
There is insufficient system memory to run this query.





When i try to create one of the another assemblies ( system.enterpriseservices, system.runtime.remoting, system.design ) i get the same message.

I looked for this Error and found only this BUG-report:
BUG#: 58267 (SQLBUG_70)
Article ID: 274030
http://support.microsoft.com/kb/274030/en-us

But this does not solve my problem.

As far as i know we use MS SQL-Server 2005 without any Service-Packs.

Question:

is there any Table/View to find out the Versionnumber/Service-Pack

In the moment i am waiting for our admin to install SP2 for SQL-Server,
hoping that this will fix the problem.

Greetings


View 10 Replies View Related

CREATE ASSEMBLY ERROR

Aug 1, 2007

I am using this code to create dll : Execute.cs

using System;
using Microsoft.SqlServer.Dts.Runtime;
public class Execute
{
public static void Package(string dtsxPath)
{
try
{
Package pkg;
Application app;
DTSExecResult pkgResults;
app = new Application();
pkg = app.LoadPackage(dtsxPath, null);
pkgResults = pkg.Execute();
}
catch (System.Exception ex)
{
throw ex;
}
}
}


Then this
c:Program FilesMicrosoft Visual Studio 8VC>csc /target:library C:SSISSSISE
xecute.cs /reference:C:SSISSSISMicrosoft.SqlServer.ManagedDTS.dll


It creates Execute.dll

but when I run this is sql server

CREATE ASSEMBLY ssid from 'c:Program FilesMicrosoft Visual Studio 8VCExecute.dll'

WITH PERMISSION_SET = UNSAFE


I am getting Error

Warning: The SQL Server client assembly 'microsoft.sqlserver.manageddts, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.

Warning: The SQL Server client assembly 'microsoft.sqlserver.dtsruntimewrap, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.

Msg 10301, Level 16, State 1, Line 1

Assembly 'Execute' references assembly 'system.windows.forms, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: 2(The system cannot find the file specified.)). Please load the referenced assembly into the current database and retry your request.


I don't see any place I am using System.window.forms

Any idea why? Thanks - Ashok

---------------------------------------------------------
I changed my location to to CSC
C:WINNTMicrosoft.NETFrameworkv2.0.50727>

Now I get this error


Warning: The SQL Server client assembly 'microsoft.sqlserver.manageddts, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.

Warning: The SQL Server client assembly 'microsoft.sqlserver.dtsruntimewrap, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.

Warning: The Microsoft .Net frameworks assembly 'system.windows.forms, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.

Warning: The Microsoft .Net frameworks assembly 'system.drawing, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.

Warning: The Microsoft .Net frameworks assembly 'accessibility, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.

Warning: The Microsoft .Net frameworks assembly 'system.runtime.serialization.formatters.soap, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.

Msg 10301, Level 16, State 1, Line 1

Assembly 'Execute1' references assembly 'microsoft.sqlserver.msxml6_interop, version=6.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: 2(The system cannot find the file specified.)). Please load the referenced assembly into the current database and retry your request.

---------------------------------------------
I managed to found this DLL Microsoft.SQLServer.msxml6_interop.dll so I copied to same location
Now It's looking for


microsoft.sqlserver.sqltdiagm - Which I am not able to find any place .......................

View 6 Replies View Related

Error In Custom Assembly

Jan 7, 2008

When I add a custom assembly

I am trying to pass certain fields in dataset I am getting the following error



invalid fields i.e. that is fields that I passed are invalid.

It also says multi path identifier for microsft.reportingservices.reportobjectmodel.fieldimpl cud not be found.

Thanks

Sai

View 1 Replies View Related

Error Registering A Third Party Assembly

May 16, 2006

Help.

When I try to CREATE/Register a third party assembly (dtsearchNetApi2) within SQL server I am getting an error (see below). I have the source code for dtsearchNetApi2 but it is in C++ and I would like to avoid having to extend/modify it if that is avoidable. I have written a 'wrapper' class in C# but sine it references dtsearchNetApi2.dll I can't register that dll either.



CREATE ASSEMBLY DBSEARCHNETAPI

FROM 'C:TempdtsearchNetApi2.dll'

WITH PERMISSION_SET = UNSAFE



Msg 6218, Level 16, State 3, Line 2

CREATE ASSEMBLY for assembly 'dtSearchNetApi2' failed because assembly 'dtSearchNetApi2' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message



dtsearchNetApi2 has references to unmanaged code. The dtSearchNetApi2.dll is a .NET 2.0 wrapper around C++ objects exported in dten600.dll. It is implemented in MSVC++ with Managed Extensions is implemented in C++/CLI 2.0.

View 3 Replies View Related

Cannot Find File Or Assembly Error.....

Feb 28, 2007

I created an assembly to access my SSRS web service in a Script task. The package runs fine on my machine but gets the following error from the production box.....

The script threw an exception: Could not load file or assembly 'Microsoft.SqlServer.ReportingServices2005, Version=0.0.0.0, Culture=neutral, PublicKeyToken=3bd4760abc5efbcb' or one of its dependencies. The system cannot find the file specified.

I followed the exact same procedures for creating the .dll on the production box as I did developing on my machine...strong name, load to gac etc....but it still cannot find it.

My production SQL Server is 64 bit so perhaps there is another step I need to take? Anyone have a clue as to what I may be missing?

TIA

View 1 Replies View Related

Error Adding Assembly To SQL 2005

Mar 8, 2007

I have a clr assembly that access the internet via Sockets and file access. This require me to set the Assembly permissions level to External.

There are lots of messages on the net regarding this issue. none have worked for me.

Currently I'm trying to install the assembly with "sign the assembly" checked, createing a strong name key file.

When I run the installation I get the following message from the server

"Create failed for SqlAssembly 'xxx'.(Microsoft.sqlServer.Smo)

an exception occured while executing a Transact-SQL statement or batch

(Microsoft.SqlServer.ConnectionInfo)

A severe error occured in the current command. The results, if any, should be discarded.

This is the messag I get.

The following link does not display any usefull information.

TITLE: Microsoft SQL Server Management Studio
------------------------------

Create failed for SqlAssembly 'KBTTriggers'. (Microsoft.SqlServer.Smo)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+SqlAssembly&LinkId=20476

------------------------------
ADDITIONAL INFORMATION:

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

------------------------------

A severe error occurred on the current command. The results, if any, should be discarded.
A severe error occurred on the current command. The results, if any, should be discarded. (Microsoft SQL Server, Error: 0)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=0&LinkId=20476

------------------------------
BUTTONS:

OK
------------------------------

View 2 Replies View Related

Stored Procedure Assembly Error

Oct 18, 2007

Hello there,

I am having trouble with the following and appreciate any help.Thanks in advanced.

I have created an assembly to delete records in exchange (which works fine when testing it in debug mode). I then create the assembly in SQL server 2005(tried both unsafe and external access btw), and then i create a stored procedure calling the assembly.

Now my error occurs when i try to execute this stored procedure in SQL Server. I get the following...

Msg 6522, Level 16, State 1, Procedure sp_DeleteExchApp, Line 0A .NET Framework error occurred during execution of user defined routine or aggregate 'sp_DeleteExchApp': System.Security.SecurityException: System.Security.Permissions.SecurityPermissionSystem.Security.SecurityException: at App_Delete.eSay.AppointmentDelete.DeleteAppointment(Guid GUID).(1 row(s) affected)

Now when i have looked around the web, i have come accross people saying that it is to do with the assembly trying to access something it does not have permission for. But i cant figure out what that is or why it is throwing an error.

The code for the assembly is as follows:




Public Shared Sub DeleteAppointment(ByVal GUID As System.Guid) Dim CalendarURL As String Dim ItemURL As String Dim Rs As New ADODB.Recordset Dim Rec As New ADODB.Record Dim Conn As New ADODB.Connection Dim iAppt As New Appointment Dim Target As String Dim strCRMGUID As String Dim strGUID As String Dim sSQL As String Dim Check As String strCRMGUID = GUID.ToString 'Using the Exchange OLE DB provider CalendarURL = "file://./backofficestorage/esay-solutions.co.uk/public folders/Office Diary" 'Open a recordset for the items in the calendar folder Rec.Open(CalendarURL) Rs.ActiveConnection = Rec.ActiveConnection sSQL = "SELECT ""DAV:href"", " & _ " ""urn:schemas:calendar:location"", " & _ " ""urn:schemas:calendar:dtstart"", " & _ " ""urn:schemas:calendar:dtend"", " & _ " ""urn:schemas:httpmail:textdescription"" " & _ "from scope('shallow traversal of """ & CalendarURL & """')" Rs.Open(sSQL, Rec.ActiveConnection, CursorTypeEnum.adOpenUnspecified, LockTypeEnum.adLockOptimistic, 1) 'Enumerate the recordset, checking each item's location If Rs.RecordCount > 0 Then Rs.MoveFirst() Do Until Rs.EOF 'get the location of each item Check = Rs.Fields(CdoHTTPMail.cdoTextDescription).Value strGUID = StripGUID(Check) 'test for desired location If (strGUID = strCRMGUID) Then Rs.Delete() End If Rs.MoveNext() Loop End If End Sub
Private Shared Function StripGUID(ByVal i_strAppDescription As String) As String
'Function to strip the GUID from the message field Dim r As Integer Dim SearchChar As String Dim testPos As Integer Dim GUID As String SearchChar = "**¦" testPos = InStr(i_strAppDescription, SearchChar) testPos = testPos + 3 If testPos > 0 Then GUID = Mid(i_strAppDescription, testPos) End If StripGUID = GUID End Function End ClassEnd Namespace




Thanks again for any help.

View 5 Replies View Related

CREATE ASSEMBLY Error: Could Not Be Installed

Jul 3, 2006

I ran the following:

CREATE ASSEMBLY A3rdPartyDLL
FROM 'C:Program Files3rdPartyComponents3rdParty.dll'
WITH PERMISSION_SET = EXTERNAL_ACCESS

and got the following error message:

Assembly 'A3rdPartyDLL' could not be installed because existing policy would keep it from being used.

How can I change the 'existing policy'?

View 12 Replies View Related

Error In SQL Server 2005 CLR Assembly

Jan 19, 2007

In the past we've days we've had an assembly that had worked previously which now fails with the error:

Failed to open malformed assembly 'System.Data' with HRESULT 0x80070008.

There have been no changes to the .NET framework at the server level, all other assemblies on the server continue to function and the assemly does work when deployed to another server. The assembly has been recreeated from scratch yet the error persisted. In another attempt to narrow down the cause we moved the system.data.dll to another server in an attempt to see if the particular DLL was the issue, however the other server had no issues.

I'm assuming that the error we're getting has some cause other than with System.Data.dll.Does anyone have any ideas what could be causing this or how to proceed in troubleshooting this issue?

Thanks

Bill

View 4 Replies View Related

Error 6522 Trying To Run Assembly From Database

Jan 25, 2006

Hi,

I am attempting to load an assembly that has been stored in a table as a byte array. I have created a c# class called AssemblyLoader that takes in 2 parameters, the assembly name and the parameters for the assembly (just a query string).

From this it returns the assembly byte array using a simple sql statement within the class using the assembly name to select the assembly bytes to return from the database.

The returned byte array of the assembly is loaded using: 

    Assembly assembly = Assembly.Load(assemblyBytes);


This seems to be the line that SQL Server 2005 is erroring on. Do I need to add some extra assemblies to the database and if so which ones.

Error:
Msg 6522, Level 16, State 1, Procedure ClientInterface, Line 0
A .NET Framework error occurred during execution of user defined routine or aggregate 'ClientInterface':
System.IO.FileLoadException: LoadFrom(), LoadFile(), Load(byte[]) and LoadModule() have been disabled by the host.
System.IO.FileLoadException:
   at System.Reflection.Assembly.nLoadImage(Byte[] rawAssembly, Byte[] rawSymbolStore, Evidence evidence, StackCrawlMark& stackMark, Boolean fIntrospection)
   at System.Reflection.Assembly.Load(Byte[] rawAssembly)
   at Reflector.runQuery(String query, String parameter)

Thanks for your help.

View 6 Replies View Related

Assembly Load Error Using Replication In VB Code

Sep 28, 2007



Hi,
I'm trying to develop a custom conflict resolver and I get the following message:

Error loading custom class "HQ.MemberHandler" from custom assembly "C:shareConflictHandler.dll", Error : "Could not load type 'HQ.MemberHandler' from assembly 'ConflictHandler, Version=1.0.0.0, Culture=neutral, PublicKeyToken=42ba9b913dccf3a9'."."

The resolver is register in the GAC.
I checked with sp_enumcustomresolvers that it is register in SQL.
The sync is working fine if I'm not using the resolver.

Here's the code of the resolver:

Imports System
Imports System.Text
Imports System.Data
Imports System.Data.Common
Imports Microsoft.SqlServer.Replication.BusinessLogicSupport
Namespace HQ
Public Class MemberHandler
Inherits BusinessLogicModule
' Variables to hold server names.
Private publisherName As String
Private subscriberName As String
' Implement the Initialize method to get publication
' and subscription information.
Public Overrides Sub Initialize( _
ByVal publisher As String, _
ByVal subscriber As String, _
ByVal distributor As String, _
ByVal publisherDB As String, _
ByVal subscriberDB As String, _
ByVal articleName As String _
)
' Set the Publisher and Subscriber names.
publisherName = publisher
subscriberName = subscriber
End Sub
' Declare what types of row changes, conflicts, or errors to handle.
Public Overrides ReadOnly Property HandledChangeStates() As ChangeStates
Get
' Handle Subscriber inserts, updates and deletes.
Return (ChangeStates.SubscriberInserts Or _
ChangeStates.SubscriberUpdates Or ChangeStates.SubscriberDeletes)
End Get
End Property
Public Overrides Function InsertHandler(ByVal insertSource As SourceIdentifier, _
ByVal insertedDataSet As DataSet, ByRef customDataSet As DataSet, _
ByRef historyLogLevel As Integer, ByRef historyLogMessage As String) _
As ActionOnDataChange
If insertSource = SourceIdentifier.SourceIsSubscriber Then
' Build a line item in the audit message to log the Subscriber insert.
Dim AuditMessage As StringBuilder = New StringBuilder()
AuditMessage.Append(String.Format("A new member was entered at {0}. " + _
"The ID for the member is :", subscriberName))
AuditMessage.Append(insertedDataSet.Tables(0).Rows(0)("memb_seq").ToString())
AuditMessage.Append("Member Name :")
AuditMessage.Append(insertedDataSet.Tables(0).Rows(0)("memb_pnom").ToString())
' Set the reference parameter to write the line to the log file.
historyLogMessage = AuditMessage.ToString()
' Set the history log level to the default verbose level.
historyLogLevel = 1
' Accept the inserted data in the Subscriber's data set and
' apply it to the Publisher.
Return ActionOnDataChange.AcceptData
Else
Return MyBase.InsertHandler(insertSource, insertedDataSet, customDataSet, _
historyLogLevel, historyLogMessage)
End If
End Function
Public Overrides Function UpdateHandler(ByVal updateSource As SourceIdentifier, _
ByVal updatedDataSet As DataSet, ByRef customDataSet As DataSet, _
ByRef historyLogLevel As Integer, ByRef historyLogMessage As String) _
As ActionOnDataChange
If updateSource = SourceIdentifier.SourceIsPublisher Then
' Build a line item in the audit message to log the Subscriber update.
Dim AuditMessage As StringBuilder = New StringBuilder()
AuditMessage.Append(String.Format("An existing member was updated at {0}. " + _
"The ID for the member is ", subscriberName))
AuditMessage.Append(updatedDataSet.Tables(0).Rows(0)("memb_seq").ToString())
AuditMessage.Append("Member Name :")
AuditMessage.Append(updatedDataSet.Tables(0).Rows(0)("memb_nom").ToString())
' Set the reference parameter to write the line to the log file.
historyLogMessage = AuditMessage.ToString()
' Set the history log level to the default verbose level.
historyLogLevel = 1
' Accept the updated data in the Subscriber's data set and apply it to the Publisher.
Return ActionOnDataChange.AcceptData
Else
Return MyBase.UpdateHandler(updateSource, updatedDataSet, _
customDataSet, historyLogLevel, historyLogMessage)
End If
End Function
Public Overrides Function DeleteHandler(ByVal deleteSource As SourceIdentifier, _
ByVal deletedDataSet As DataSet, ByRef historyLogLevel As Integer, _
ByRef historyLogMessage As String) As ActionOnDataDelete
If deleteSource = SourceIdentifier.SourceIsSubscriber Then
' Build a line item in the audit message to log the Subscriber deletes.
' Note that the rowguid is the only information that is
' available in the dataset.
Dim AuditMessage As StringBuilder = New StringBuilder()
AuditMessage.Append(String.Format("An existing member was deleted at {0}. " + _
"The rowguid for the member is ", subscriberName))
AuditMessage.Append(deletedDataSet.Tables(0).Rows(0)("rowguid").ToString())
' Set the reference parameter to write the line to the log file.
historyLogMessage = AuditMessage.ToString()
' Set the history log level to the default verbose level.
historyLogLevel = 1
' Accept the delete and apply it to the Publisher.
Return ActionOnDataDelete.AcceptDelete
Else
Return MyBase.DeleteHandler(deleteSource, deletedDataSet, _
historyLogLevel, historyLogMessage)
End If
End Function
End Class
End Namespace

Here's the SQL query to register the resolver:

DECLARE @publication AS sysname;
DECLARE @article AS sysname;
DECLARE @friendlyname AS sysname;
DECLARE @assembly AS nvarchar(500);
DECLARE @class AS sysname;
SET @publication = N'memb';
SET @article = N'memb';
SET @friendlyname = N'TestConlictResolver';
SET @assembly = N'C:shareConflictHandler.dll';
SET @class = N'HQ.MemberHandler';
-- Register the business logic handler at the Distributor.
EXEC sys.sp_registercustomresolver
@article_resolver = @friendlyname,
@resolver_clsid = NULL,
@is_dotnet_assembly = N'true',
@dotnet_assembly_name = @assembly,
@dotnet_class_name = @class;
-- Add an article that uses the business logic handler
-- at the Publisher.
EXEC sp_changemergearticle
@publication = @publication,
@article = @article,
@property = N'article_resolver',
@value = @friendlyname,
@force_invalidate_snapshot = 0,
@force_reinit_subscription = 0;
GO

Any clues??

Thanks

View 2 Replies View Related

VS2008 Pro Report Viewer Assembly Error

Jan 26, 2008

Parser Error Message: Could not load file or assembly 'Microsoft.ReportViewer.WebForms, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.


I'm not sure what to do to fix this. I've downloaded the redistributable for the report viewer. Please help, I need to have this before the weekend is over.

Thanks,

View 4 Replies View Related

CREATE ASSEMBLY ERROR -- An Implicit Reference Of Some Kind ???

Jun 28, 2006

When I run this ...

CREATE ASSEMBLY asmRANDRTCalendaringGateway FROM 'E:sqlRANDRTCalendaringGateway.dll' WITH PERMISSION_SET = UNSAFE

I get this error ...

Msg 10301, Level 16, State 1, Line 1
Assembly 'RANDRTCalendaringGateway' references assembly 'system.web, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: 2(The system cannot find the file specified.)). Please load the referenced assembly into the current database and retry your request.

Even though I do not explicity refer to system.web in the DLL's code ...

using Microsoft.Win32;
using System;
using System.Data.Sql;
using System.Data.SqlClient;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using log4net;
using ADODB;
using MAPI;
using CDO;
using System.Runtime.InteropServices;

Is the problem just staring me in the face ?

cheers

View 14 Replies View Related

Error While Merging Snapshot Containing A CLR Assembly Schema At The Subscriber

Sep 26, 2007



Hi ,

I urgently need a solution for this. I have configured merge replication between a webhoster and a local machine
and it is working perfectly but when I am adding an article (table) which has a CLR assembly associated with it,
the merge replication is failing saying it cannot apply the schema of the CLR assembly at the client. I think Microsoft
supposedly says in it's documentation that merge replication supports CLR assemblies. I have recreated the snapshot
after selecting the table (article) and I have reinitialised the subscription also but it is just not working. It is the simplest
of replication with just one publisher and one subscriber.

Thanks,
Andy

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved