Error When Importing Text File - Saving In Notepad First Works
I'm trying to import a tab separated text file into sql server 2005 using the import guide. But when running the job I get the error message
Error 0xc02020c5: Data Flow Task: Data conversion failed while converting column "Column 19" (67) to column "Column 19" (404). The conversion returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
(SQL Server Import and Export Wizard)
The column 19 which reported a problem contains this information:
?searchroot=/_gen_/txt/&template=std.htm&use=prospect&intref=1_26067
However what is mysterious is that if I open the file in notepad or Excel and resave it again the job runs perfectly. This is not a way we could make it work later on since it's an automatic job that will run each night on a new text file.
The text file is sent from Norway to Sweden - and I use ANSI latin 1 when importing.
The column has datatype DT_STR with a width of 500.
I use Locale Swedish and when I save in Notepad it is saved in ANSI,
I use Windows XP Swedish version.
View Complete Forum Thread with Replies
Related Forum Messages:
Error While Importing Text File Into Sql Server 2000
hi all, While importing into sql server 2000 from a text file i am getting an error message like not enough disk space available to perform this operation but there is enough space (around 18gb). Please advice why this is happenning as my work is stuck thanks and regards jk
View Replies !
Importing A Fixed Field File And Saving The Set Up
I recently upgrated from server 200 to 2005. On a Weekly basis, I have a fixed field file with lots of fields that I need to import into a table of a new database. Is there a way to "save" my import specs? In the past, I've saved a DTS package and copied it into the new data base. Then adjusted the properties to point to the new files and ran it. On 2005, it prompted me if I wante to save a SSIS package, and I did, but not I can't find that any where. Is there a easier way to go about? Thank for your help in advance. Alan
View Replies !
&&"Invalid Character Value For Cast Specification&&" Error Upon Importing Text File
Hi all--Given a table called "buyers" with the following column definitions in a SQL Server 2005 database: [BUYER] [nvarchar](40) NULL, [DIVISION] [nvarchar](3) NULL, [MOD_DATE] [datetime] NULL This table is laden with Unicode data and the MOD_DATE contains no data--not even NULL values, and is giving me a headache as a result. I can export this data fine to a text file, but when I create an SSIS package to attempt import to another table defined exactly the same as above in another place, I get the following messages: SSIS package "buyers_import.dtsx" starting. Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning. Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning. Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning. Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning. Information: 0x402090DC at Data Flow Task, Source - buyers_txt [1]: The processing of file "D: emp3uyers.txt" has started. Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning. Information: 0x402090DE at Data Flow Task, Source - buyers_txt [1]: The total number of data rows processed for file "D: emp3uyers.txt" is 232. Error: 0xC0202009 at Data Flow Task, Destination - buyers_tst [22]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". Error: 0xC020901C at Data Flow Task, Destination - buyers_tst [22]: There was an error with input column "MOD_DATE" (45) on input "Destination Input" (35). The column status returned was: "The value could not be converted because of a potential loss of data.". Error: 0xC0209029 at Data Flow Task, Destination - buyers_tst [22]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (35)" failed because error code 0xC0209077 occurred, and the error row disposition on "input "Destination Input" (35)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure. Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - buyers_tst" (22) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited. Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning. Information: 0x402090DD at Data Flow Task, Source - buyers_txt [1]: The processing of file "D: emp3uyers.txt" has ended. Information: 0x402090DF at Data Flow Task, Destination - buyers_tst [22]: The final commit for the data insertion has started. Information: 0x402090E0 at Data Flow Task, Destination - buyers_tst [22]: The final commit for the data insertion has ended. Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning. Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Destination - buyers_tst" (22)" wrote 0 rows. Task failed: Data Flow Task SSIS package "buyers_import.dtsx" finished: Failure. Among the customizations in this package is the flag "ValidateExternalMetadata" set to False. The data itself is surrounded by " and delimited by semicolons for each field, with the header row set as the name of each column. It looks like this: "BUYER";"DIVISION";"MOD_DATE" "108 Joon-Hyn Kim";"TAD";"" "109 Kang-Soo Do";"TAD";"" "FS07 John Smith";"TAD";"" ... Can anyone suggest a course of action on how to handle the error when the MOD_DATE field is completely empty? Thanks in advance, Jonathan
View Replies !
SSIS Flat File Text Qualifier Only Works On Some Machines!
I have made a package that reads a text file into a table. The data in the file is roughly as follows. 1, "a", "b,c,ddddd", 4, "ee", 0 with the column sizes int, 1, 50, int, 2, int On all the desktop Bids environments and a SQL 2005 instance on windows server 2000 the package runs fine. on the 2 Windows server 2003/SQL 2005 machines a truncation error occurs on col 5. What is happening is on these machines the text qualifier is being ignored and column 5 is reading as ddddd instead of ee! I figured this out by changing all fields to text and seeing what came out of the other end. It is very, very strange and I've hit a brick wall. If Anyone has any ideas throw them in the mixer please? Cheers, Steve
View Replies !
Importing Text File To Sql
Happy Thursday all, I am importing a text file to sql and most of my fields look like this: "M","NEW ADDRESS", and my other field looks like this: "firstname Lastname" but I need it like this: "firstname", "Lastname" Can anyone help me understand a better way of making this happen? Thanks in advance
View Replies !
Importing Text File To SQL
HI Guys, I am doing the following to read the data in a text file and inserting it into SQL. 1) Open db connection 2) Open Text File 3) loop through text file all along inserting each row into the db 4) close the text file 5) close the db connection However, the text file has over 400 rows/lines of data that need to be inserted into the db. Each line in the text file is a row in the db. At anyrate, the above script times out. Is there a better, faster way to do this? I can't use Bulk Insert due to permissions previlages. Thanks in Advance!
View Replies !
Importing TEXT File In DTS
Hello Guys, I Hava a Source text connection and I'd like to take just the first row ( the header, of course) of the file to one table. How can I get this?? Tis is quite Urgent. Thanxs;
View Replies !
Importing Text File Into Database
Hello Everyone, I would like to import a text file which contains one string (a large integer) per line not separated by commas or anything else except a carriage return. Does anyone know of an easy way to store this in a database file? I'm open to suggestions if there is more than one way to save this kind of information within a database. I have SQL server 2005 developer edition if that helps in any way. I'm also starting to learn about Linq so if there is some other way you would store this information for that purpose I would love to hear about that as well. C# code is preferable, but I can use the automatic translators if that's all you have. By the way, I'm a newbie to this subject (if you couldn't tell). Thanks in advance. Robert
View Replies !
Having Problem While Importing A Text File
Hello everbody,Our system is using Sql Server 2000 on Windows XP / Windows 2000We have a text file needs to be imported into Sql Server 2000 as atable.But we are facing a problem which is,Sql Server claims that it has a character size limit ( which is 8060 )so it cant procceed the import operation if the text file has a recordbigger then 8060.The records , in the text file, have a size bigger then 8060. So wewont be able to import the text file.On the other hand it is said that Sql Server 2005 can get a recordbigger then 8060 butagain we couldnt be able to perform the task.As a result, i urgently need to know that how may i import the textfile which has a record bigger then 8060 characters.?Any help is appreciatedthanks a lot!!Tunc Ovacik
View Replies !
Errors On Importing A Text File
When a DTS fails on a Text Source input with an error like "DTS_Transformation encountered an invalid data value for 'Column1' destination" Is there a way to get the line number of the textfile where the import failed? It is hard to determine where in my 40,000-line file it found the invalid value for my column. Thanks, Andrew
View Replies !
Importing All The Text File In A Directory Using DTS
Hi everyone Thanks for reading and helping me out of this problem. I have a directory where I have text file with date as a file name, thus all the files have different file names. But I want to do is import all the text files into sql server 2000 ,right now i have a DTS package which i have up upload all the text files manually , I do not know how to loap it so that it DTS funcation check all the files in a directory and import it into database. I will appreciate if anyone can help me out of this .
View Replies !
Importing A Text File Using The Wizard
I have been sent a zipped tab delimited text file thart was created by exporting a table using the the wizard in the SQL that comes with Vista. I am using SQL standard. When I browse and pick the flat file I get a warning message at the bottom of the dialog: Columns are not defined for this connection manager. What is this error and how do i correct it? If i continue and run i get a warning: Warning 0x80047076: Data Flow Task: The output column "Column 0" (10) on output "Flat File Source Output" (2) and component "Source - PhyProOct2007_txt" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance. (SQL Server Import and Export Wizard) and an error Pre-execute (Error) Messages Information 0x402090dc: Data Flow Task: The processing of file "C:FTP HDS DataPhyProOct2007.txt" has started. (SQL Server Import and Export Wizard) How can i correct this?
View Replies !
Importing Data From Ascii Text File
Help! I have just gotten started with visual web developer and have what I believe are sql databases (perhaps sql express) that have come with them. do sql databases use an extension of mdf? Anyway, what I am trying to do is import some data from a text file into a table in one of these .mdf files with visual web developer so that I can get started developing with some meaningful data. I have a valid sql connection established to this file (personal.mdf) I have created a table within it called users and have set up the structure (schema?) correctly. All I need to do is import some data from a text file (users.txt) that is also setup correctly I believe. I think after that I'm going to be fine! (Sure). Can anyone help me please? Thanks, Joe
View Replies !
Importing Text File Into SQL Server Problem
Hello,I am trying to load a text file into SQL Server but the text file seems to be in an unsual format that SQL Server is having a problem reading. I have tried the various options for delimited and fixed file formats.Any ideas would be appreciated.Sample of the file: Dn DCHB;… b` DCHCVDR SMGSWP04JOB08748SMA 704DSEARS VDR SWEEP 4 RDSSWSM REPTPROCSTEP1 V-1 &Î &Î BRTA_UA46 200508082345079999 BANNER PAGE ;… b` DCHCVDR SMGSWP04JOB08748SMA 704DSEARS VDR SWEEP 4 RDSSWSM REPTPROCSTEP1 V-1 &Î &Î BRTA_UA46 20050808234507 420 ;… b` DCHCVDR SMGSWP04JOB08748SMA 704DSEARS VDR SWEEP 4 RDSSWSM REPTPROCSTEP1 V-1 &Î &Î BRTA_UA46 20050808234507 425 ;… b` DCHCVDR SMGSWP04JOB08748SMA 704DSEARS VDR SWEEP 4 RDSSWSM REPTPROCSTEP1 V-1 &Î &Î BRTA_UA46 20050808234507 440
View Replies !
Importing Text File To SQL SERVER TABLE
Hello I am writing program in VC++ through SQl-DMO calls.My problem is when i when i tranfer(import) a text file(comma seperated) into SQl server through a SQl-DMO method called ImportData which is a method of Bulk copy object.Its is not able to convert the data field in the text file to corresponding value datetime in SQl server whereas other data types are working perfectly. This is the record i need to convert: 90,MichaelB,Wintriss,Inspection,Paper,11,Job101,1, {ts '2000-12-10 15:54:56.000'},D:public233 and 247233.mcs, and this is the date field {ts '2000-12-10 15:54:56.000'} Whereas if i export a table in SQl server in Binary mode and then import the file back it works but when do it as text it gives the above error Pls help me in this i would be very thankful to you. Note: I am using SQL Server 7.0 version Regards Jitender Singh
View Replies !
Importing Text File Store Procedure
hi guys.. i need some assistance.. i have couple of .txt file to import into database.. @ the moment i am doing by improting process in sql management.. but it's realy pain and time taking.. i got a stander file format that i import,. and the destination table if exist then ookay otherwise i just create one .. Is it possible that i can write a Store procedure so that i can use that .... Please help me.. i dont' a single clue about this.. Thanks
View Replies !
Importing Text File Into SQL SERVER 2005
I want to be able to import data from a text file, into SQL Server 2005, using OPENROWSET. Can you pl give the the syntax for this. What I HAVE IS select * --into #tmp1 From OpenRowSet ( 'Microsoft.Jet.OLEDB.4.0', 'Text;\ABC.TXT )
View Replies !
Importing Text File: How To Dynamically Change The Row Delimiter
Hi, I have a dts package that imports a number of text files into a SQL Server 2000 database table. The package has been set up to accept a text file with a row delimiter of carriage return and line feed ({CR}{LF}). Some of the text files I receive only have a line feed ({LF}) as the row delimiter and the dts package fails the file. Is there an activex script i can use that will scan the file and change the row delimiter as required? i was going to use the filesystemobject which allows me to read a line at a time, however the Readline method doesn't read the new line character. The text files are too big to read into one variable and then do a replace. Any help would be appreciated I am using SQL Server 2000 SP3, Windows Server 2000 and Windows XP Professional. All systems are fully patched Regards Justin
View Replies !
Fixed Width Text File Importing Problem
Does anyone know how to import a fixed width text file into a data table, using T-SQL? I am having problem importing a fixed width text file into a data table with fields smaller than the width of the text file. The text file must be broken up into the related fields in the table, using a job. The job must be able to process other text files of fixed width also. I have tried using bulk insert, but it only allows a text file be inserted into a column of equal size or larger. I have also tried importing into a table, then trying to break up the field using variables, then assigning the variables to their related fields, but I get error messages. Is there any code or references using T-SQL on this problem, that someone can share with me. Also, I have used the DTS Import Wizard, but it works for a specific file, not files with different filenames. Thanks James
View Replies !
Issues Importing A Text File (tab Delimited) To A SQL Table
I have a text file I am trying to import to a table. This text file is in a tab delimited format. I am using DTS to import the data to a new table I made. The fields are varchar and are set to allow nulls & allow 8,000 characters per field. The error I am getting is that the data exceeds the allowed amount (or something like that) in col4. Now I have checked everything in column 4 and nothing exceeds 5,000 spaces/characters combined. I have checked the entire sheet (in excel) for that fact, and there is not one single column/row/cell that exceeds 5,000 spaces/characters combined. What the heck could be causing SQL to tell me I am trying to import too much data in one column when there is nothing that even comes close to 8,000 characters & spaces combined?
View Replies !
Importing Text File Removes Decimal Separator
Hi, I'm trying to import a semi-comma separated text file into a SQL db. I have a field in the text file that contains decimal number. As a decimal separator it's used a comma (15,35). When i use a DTS package to create a destination table and import all rows, the field is created as a float field. In this field the decimal comma is removed so the number in SQL becomes 1535. If I change the decimal separator to (.) i works OK. But I need to get it work with comma as decimal separator. In the DTS package the field form the text file is recognised as varchar (8000). Any ideas? Ingar
View Replies !
Problem Importing Data From SQL To A EBCDIC Text File
Hi, how are you? I generated a Data Flow Task where a OLE DB Source connects to a SQL Server and gets data from a table. The next step, writes a txt file with the information (Flat File destination). All data is imported to txt fiel if this one is configured as Code Page: 1252 (ANSI - Latin I) in the connection manager for the flat file. But if I change Code Page: 500 (IBM EBCDIC - International) which is the one I need beacuse I have to imported in a mainframe, it doesn't work. This is the error that I receive: Code Snippet TITLE: Package Validation Error ------------------------------ Package Validation Error ------------------------------ ADDITIONAL INFORMATION: Error at Data Flow Task [Flat File Destination [31]]: The code page on input column "STATUS_CD" (1293) is 1252 and is required to be 500. Error at Data Flow Task [Flat File Destination [31]]: The code page on input column "SRC_NUM" (1294) is 1252 and is required to be 500. Error at Data Flow Task [DTS.Pipeline]: "component "Flat File Destination" (31)" failed validation and returned validation status "VS_ISBROKEN". Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation. Error at Data Flow Task: There were errors during task validation. (Microsoft.DataTransformationServices.VsIntegration) Does any one knows how can I convert from ANSI to EBCDIC or what I have to configure so as to not receive that error messsage? Thanks for help and time. Beli
View Replies !
How Can I Create A DTS Package To Update A Table With Data From A Notepad File ?
We are creating a process which will create a notepad file with a set of Unique key which we use to update the database. Am trying to create a DTS package to accomplish this...but it seems to be a trivial task. I can use Transform data task to lookup the text file but i need to write an update query which will update some fields of existing records. Am not sure how can i map fields of Text file to the Database table field. If any1 can help then it will be great
View Replies !
Importing Text File Problem Using Import And Export Wizard
Hi, I'm trying to import text file (generated by UNIX - collation ISO LATIN 2) into the database using SQL SERVER 2005 Import and Export Wizard. I have got a problem with importing a decimal number, because in that column are not only decimal numbers (that's OK), but there are also spaces (not null, the column is filled by spaces and it looks like | |). When I'm trying import that file, then will occur the problem of truncation and import stops. I can import that data by BULK INSERT, but I would like to import it by Import and Export Wizard at once without using subsequent conversions.
View Replies !
Importing Text File Data Into SQL Server - Missing Some Rows
Hello, I need to import one text file into my SQL database. While I am trying to import using SQL Server DTS, I have to select €śFixed Filed€?, and later I need to mention the columns. In this process I have imported the file, and later through some analysis I have found that there are some columns which are not properly separated in the text file. Her I am facing the following problems. It causes to append the next row value with the previous row value in SQL Server table. I am not aware of the how many rows are there in my text file, but after importing into SQL server I can see 271109 rows After analysis I have seen that some of the rows are not imported so, how can I count how many rows are there in my text file so that I can cross verify. Note: As I have mentioned above some of my rows are messed up with the next row and SQL Server counts these rows as one row. Here is the sample data where I exactly I am facing the problem. In the text file values are displaying like: 04203 03/22/2003 18654 1 CHARGE RECARGO DOMINGO 200.00 04203 02/06/2007 0005071 CHARGE 2DO ABRIR TUMBA 375.00 04203 02/06/2007 000507C CHARGE CITY TAX 5.62 04203 02/06/2007 000507S CHARGE PR TAX 20.62 04203 02/06/2007 171078 PAYMENT PAGO FACT.507 VISA 401.24 04206 10/27/1990 6826 PAYMENT PAGO FACT. 6828 CASH 50.00 After importing into SQL Server same values are like below: 04203 03/22/2003 18654 1 CHARGE RECARGO DOMINGO 200.00 04203 02/06/2007 0005071 CHARGE 2DO ABRIR TUMBA 375.00 04203 02/06/2007 000507C CHARGE CITY TAX 5.62 04203 02 /06/2007 04203 02/06/2007 171078 PAYMENT PAGO FACT.507 VISA 401.24 04206 10/27/1990 6826 PAYMENT PAGO FACT. 6828 CASH 50.00 It will be great help to me, if any one knows the solution for this kind of scenarios. Regards, Ansaar
View Replies !
Problem Importing Csv Delimited Text File Into A Sql Server 2005 Table
I am using the Bulk Insert command and trying to import a CSV delimited text file into a table and I am having problems with the quote field delimiters ", " The command below works but it takes in all the "" quotes as well and the field delimiter comma , works only if the commas are the separators only. If I have a comma within a address field for example then the data gets imported into the wrong fields. What can I use to identify that the text qualifier is ". I don't see where I can use the bulk insert command to determine this. Is there another command that I can use or am I using this command incorrectly. I thank you in advance for any response or suggestion you may have. BULK INSERT AdventureWorks.dbo.MbAddress FROM 'a:mbAddress.txt' WITH ( DATAFILETYPE = 'char', FIELDTERMINATOR=',', ROWTERMINATOR='', CODEPAGE = '1252', KEEPIDENTITY, KEEPNULLS, FIRSTROW=2) Here is a sample ascii file I am importing as well you can see that 6330 has a extra comma in the address line. "AddressAutoID","Memkey","Type","BadAddress","Address1","Address2","Address3","City","State","Zip","Foreign","CarrierRoute","Dpbc","County","CountyNo","ErrorCode","ChangeDate","UserID" 6317,26517,1,0,"1403 W. Kline Ave","","","MILWAUKEE","WI","53221","","",0.00,"MILWAUKEE",79,"",1/25/2006 0:00:00,"admin" 6318,26225,1,0,"501 Dunford Dr","","","BURLINGTON","WI","53105","","",0.00,"RACINE",101,"",1/25/2006 0:00:00,"admin" 6319,20101,1,0,"2115 Cappaert Rd #35","","","MANITOWOC","WI","54220","","",0.00,"MANITOWOC",71,"",1/25/2006 0:00:00,"admin" 6320,23597,1,0,"728 Woodland Park Dr","","","DELAFIELD","WI","53018","","",0.00,"WAUKESHA",133,"",1/25/2006 0:00:00,"admin" 6321,23392,1,0,"7700 S. 51st St","","","FRANKLIN","WI","53132","","",0.00,"MILWAUKEE",79,"",1/25/2006 0:00:00,"admin" 6322,26537,1,0,"W188 S6473 GOLD DRIVE","","","MUSKEGO","WI","53150","","",0.00,"WAUKESHA",133,"",1/26/2006 0:00:00,"admin" 6323,25953,1,0,"3509 N. Downer Ave","","","MILWAUKEE","WI","53211","","",0.00,"MILWAUKEE",79,"",1/26/2006 0:00:00,"admin" 6324,19866,1,0,"10080 E. Mountain View Lake Rd. #145","","","SCOTTSDALE","AZ","85258","","",0.00,"MARICOPA",13,"",1/27/2006 0:00:00,"admin" 6325,25893,1,0,"W129 N6889 Northfield Dr. Apt 114","","","MENOMONEE FALLS","WI","53051-0517","","",0.00,"WAUKESHA",133,"",1/27/2006 0:00:00,"admin" 6326,26569,1,0,"8402 64th Street","","","KENOSHA","WI","53142-7577","","",0.00,"KENOSHA",59,"",1/27/2006 0:00:00,"admin" 6327,24446,4,0,"83 Sweetbriar Br","","","LONGWOOD","FL","32750","","",0.00,"SEMINOLE",117,"",1/30/2006 0:00:00,"admin" 6328,19547,1,0,"4359 MERCHANT AVENUE","","","SPRING HILL","FL","34608","","",0.00,"HERNANDO",53,"",2/8/2006 0:00:00,"admin" 6329,26524,1,0,"264 Lakeridge Drive","","","OCONOMOWOC","WI","53066","","",0.00,"WAUKESHA",133,"",2/10/2006 0:00:00,"admin" 6330,23967,1,0,"3423 HICKORY ST","100 Tangerine Blvd., Brownsville, TX 78521-4368","Texas Phone Number: 956-546-4279","SHEBOYGAN","WI","53081","","",0.00,"SHEBOYGAN",117,"",2/15/2006 0:00:00,"admin" 6331,25318,1,0,"3960 S. Prairie Hill Lane Unit 107","","","Greenfield","WI","53228","","",0.00,"MILWAUKEE",79,"",2/20/2006 0:00:00,"admin" 6332,24446,1,0,"83 Sweetbriar BR","","","LONGWOOD","FL","32750","","",0.00,"SEMINOLE",117,"",2/21/2006 0:00:00,"admin" 6333,26135,1,0,"P.O. Box 8 127 Main Street","","","CASCO","WI","54205","","",0.00,"KEWAUNEE",61,"",2/21/2006 0:00:00,"admin"
View Replies !
How To Redirect The Error Of A Source Text File To The Other Text File?
Hi all, I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i transfering to the other Flat file destination file. Debugging is succesful but i am not getting any error output in the Flat file destination file. i had done exactly which is written in the msdn tutorial of SSIS. Plz tell why i am not getting the error output in the destination flat file. thanx
View Replies !
PrimeOutput Method Error Importing Fixed Width Text
I trying to import from fixed width text files that may contain one or more empty rows at the bottom of the file (where an empty row is {CR}{LF}). By experimenting, I found it runs successfully with up to 32 blank rows, but with any more I get this: Warning: 0x8020200F at Copy TBMO files to DW, TBMO text file source [1]: There is a partial row at the end of the file. Error: 0xC0047038 at Copy TBMO files to DW, DTS.Pipeline: The PrimeOutput method on component "TBMO text file source" (1) returned error code 0x80020005. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. Error: 0xC0047021 at Copy TBMO files to DW, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038. Error: 0xC0047039 at Copy TBMO files to DW, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. Error: 0xC0047021 at Copy TBMO files to DW, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039. The data rows look like this (256 wide): 104 8690 100540 0.00 196.27 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Any suggestions on how to bypass these lines? I tried configuring error output, but that didn't seem to help. Thanks,
View Replies !
Problems Importing Data From Excel (numbers Stored As Text Error)
i have an excel sheet in it there is a column that holds values of item numbers some of these values are preceeded with zeros E.G "00123" (with out the ") when i view the data in excel i get this little green corner whice states (when pressed) that these values are numbers stoerd as text. no inside the excel sheet i have no problem with that but when i try to import the excel sheet into ssis using an excel source task all these values are imported as nulls!!! i am lost i tried converting the format of these cells to numbers but then i loose the leading zeros what i done temporarly to solve this problem is to accept excel's suggestion and turn these values into numbers i then import them and convert them to strings in ssis and then ad dthe zeros. now althouge this works, this isnt realy a solution. i canot manualy correct each excel file each time i get a new copy and in the future i will not have the luxuery of having fixed lenght values (so i wont be able to know how many zeroe i"d need to add) there must be a better way please help thanks in advance Daniel
View Replies !
Error Importing Sql File
I purchased a domain and website, the sql file will not import properly. Can anyone shed some light on what the problem is? I am getting this error: MySQL said: Documentation #1064 - You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near 'DEFAULT CHARACTER SET latin1 COLLATE latin1_swedish_ci' at line
View Replies !
Error Importing Excel File
When ever importing a excel file or flat file, I get an Unhandled exception error and the event log reads a .Netframework error ID 1000. Checking the database I was importing into, I find that the table was created with the columns, but no data within the columns. The import wizards report 509 row copyed before crashing with the Handle error, where a dialog box appears allowing debug or close. Can anyone help? I include the logged errors. Event Log .NET Runtime 2.0 Error Event ID: 1000 Faulting application dtswizard.exe, version 9.0.1399.0, stamp 434f5e2a, faulting module dtspipeline.dll, version 2005.90.1399.0, stamp 434f5dbc, debug? 0, fault address 0x0004ba38. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 41 00 70 00 70 00 6c 00 A.p.p.l. 0008: 69 00 63 00 61 00 74 00 i.c.a.t. 0010: 69 00 6f 00 6e 00 20 00 i.o.n. . 0018: 46 00 61 00 69 00 6c 00 F.a.i.l. 0020: 75 00 72 00 65 00 20 00 u.r.e. . 0028: 20 00 64 00 74 00 73 00 .d.t.s. 0030: 77 00 69 00 7a 00 61 00 w.i.z.a. 0038: 72 00 64 00 2e 00 65 00 r.d...e. 0040: 78 00 65 00 20 00 39 00 x.e. .9. 0048: 2e 00 30 00 2e 00 31 00 ..0...1. 0050: 33 00 39 00 39 00 2e 00 3.9.9... 0058: 30 00 20 00 34 00 33 00 0. .4.3. 0060: 34 00 66 00 35 00 65 00 4.f.5.e. 0068: 32 00 61 00 20 00 69 00 2.a. .i. 0070: 6e 00 20 00 64 00 74 00 n. .d.t. 0078: 73 00 70 00 69 00 70 00 s.p.i.p. 0080: 65 00 6c 00 69 00 6e 00 e.l.i.n. 0088: 65 00 2e 00 64 00 6c 00 e...d.l. 0090: 6c 00 20 00 32 00 30 00 l. .2.0. 0098: 30 00 35 00 2e 00 39 00 0.5...9. 00a0: 30 00 2e 00 31 00 33 00 0...1.3. 00a8: 39 00 39 00 2e 00 30 00 9.9...0. 00b0: 20 00 34 00 33 00 34 00 .4.3.4. 00b8: 66 00 35 00 64 00 62 00 f.5.d.b. 00c0: 63 00 20 00 66 00 44 00 c. .f.D. 00c8: 65 00 62 00 75 00 67 00 e.b.u.g. 00d0: 20 00 30 00 20 00 61 00 .0. .a. 00d8: 74 00 20 00 6f 00 66 00 t. .o.f. 00e0: 66 00 73 00 65 00 74 00 f.s.e.t. 00e8: 20 00 30 00 30 00 30 00 .0.0.0. 00f0: 34 00 62 00 61 00 33 00 4.b.a.3. 00f8: 38 00 0d 00 0a 00 8..... Debug Log Unhandled exception at 0x2357ba38 in DTSWizard.exe: 0xC000001D: Illegal Instruction.
View Replies !
Error When Importing Data From Excel File
Hi! This is what i'm doing: IF EXISTS (SELECT srvname FROM master.dbo.sysservers srv WHERE srv.srvid != 0 AND srv.srvname = N'ExcelSource') EXEC master.dbo.sp_dropserver @server=N'ExcelSource', @droplogins='droplogins'; - EXEC master.dbo.sp_addlinkedserver @server = 'ExcelSource', @srvproduct = 'Excel', @provider = 'Microsoft.Jet.OLEDB.4.0', @datasrc = @Chemin, @provstr = 'Excel 8.0'; EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname = 'ExcelSource', @useself = false, @locallogin = NULL, @rmtuser ='ADMIN', @rmtpassword = NULL; set @NomServ = 'ExcelSource'; This create a linkedServer to read my ExcelFile. Then i'm doing this: EXEC ('Insert into Elements (No_element, Nom_elem, Desc_elem, Code_grpe_classe, Tps_elem, Code_sgrpe, Code_produit) Select No_element, Nom_elem, Desc_elem, Code_grpe_classe, Tps_elem, Code_sgrpe, Code_produit from ' + @NomServ + '...[Elements$];') This is where i got an error. The error is: The OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "ExcelSource" does not contain the table "Elements$". The table either does not exist or the current user does not have permissions on that table. I can't figure out what i'm missing. I've add permissions for EVERYONE on the file and on the folder just to be sure and i still have the same error. How can i check if the table [Elements$] exist ?
View Replies !
Error While While Importing Excel File Into SQL2005
I am using the import tool to import a small excell file into SQL. I am getting the following error Error 0xc00470fe: Data Flow TAsk: The product level is insufficient for componene "source - Current_customer$" (1) The file name I am importing is Current_customer, which contains 4 fields Id last first zip
View Replies !
|
TRACKER
