How To Use The OLEDB Command To Call A Oracle Function?
HI,
I want to use the OLEDB command to call a oracle function, but i havnt found any materials about how to do that, my oracle function is as below:
CREATE OR REPLACE function GET_ZONEID_FROM_SYFZ(ycz varchar2,xc varchar2,strat_id varchar2)
return varchar2 IS
zone_id_result varchar2(10) ;
begin
PKG_DM_DQ.GET_ZONEID_FROM_SYFZ(ycz,xc,strat_id,zone_id_result);
return zone_id_result;
end;
In OLEDB command transformation component, i fill the sql command with "select GET_ZONEID_FROM_SYFZ(?,?,?) from dual", but i dont have it worked.
The error message is :provider can not derive parameter information and setparameterinfo has not been called.
Who have any idea about how to make it work?
Thanks ~~
View Complete Forum Thread with Replies
Related Forum Messages:
How To Call A Function Using OLE DB Command Tranformation
Hello i am trying to call a function from the SQL server using Ole DB command Transformation using [dbo].[ConvertToDate] ?,?,?,? there are no errors while executing this transformation but this function returns a value Now i need to capture this value how do i do that using the OLE DB command Transformation or any other transformation Thanks
View Replies !
Calling Scalar Valued Function From SSIS OleDB Command Transformation
Hi There, I need to call a function to calculate a value. This function accepts a varchar parameter and returns a boolean value. I need to call this function for each row in the dataflow task. I thought I would use an oledb command transformation and for some reason if I say.. 'select functioname(?)' as the sqlcommand, it gives me an error message at the design time. In the input/output properties, I have mapped Param_0(external column) to an input column. I get this erro.."syntax error, ermission violation or other non specific error". Can somebiody please suggest me what's wrong with this and how should I deal this. Thanks a lot!!
View Replies !
SQL Transaction W/ Oledb Destination Vs. Oledb Command
I have been doing some tests with transactions using the method described at: http://blogs.conchango.com/jamiethomson/archive/2005/08/20/SSIS-Nugget_3A00_-RetainSameConnection-property-of-the-OLE-DB-Connection-Manager.aspx My test package is set up as follows: For loop Begin Transaction in a SQL task Sequence Container Data flow task that bring in data from a table, adds a derived column and insert into a different table A script task that returns a failure to produce an error in the sequence container If sequence container is a success the execute SQL commit and if fails, rollback transaction The data flow task and script task are done in parallel, no constraints between them. The problem is that if I use an OLE DB destination to do the insert in the data flow task, the data gets inserted despite the rollback task being shown as executing. But if I use a OLE DB command to do the insert, the rollback works just fine. I looked at the package Jamie provided in his blog and he is using a OLE DB destination so I'm unsure about what I am doing wrong. Any ideas?
View Replies !
Oracle Connection Fail With Microsoft OLEDB Provider For Oracle MSDAORA.1
Hello, On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider. I use one or the other according to my needs. In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev. Almost everything works except Microsoft OLEDB provider for Oracle. ssis packages on the test machine will return an error Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009. Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C. [Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.". I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine. Does anyone could point me to the right direction to solve this issue? Thanks, Philippe
View Replies !
Unable To Connect To Oracle Using Microsoft OLEDB Provider For Oracle
Hi everybody, I have designed a DTS package which will migrate a view from Sqlserver 2000 to Oracle.My package is using Microsoft OLEDB provider for Oracle driver for connecting to oracle.Im able to execute this package on the my system ie on the system where sqlclient is installed(Oracle client is also installed on my machine) .But when im doing it on the server im not able to do it.The Connection to Oracle Fails. I wanted to know in order to connect to Oracle from the server,is it necessary that Oracle has to be installed on the server?.If yes, is it enough if i install oracle client on the server or Oracle Server version has to be installed on Server. Please suggest me wht should i do know? Thanks in advance Regards Arvind L
View Replies !
Oledb Command
I am transfering large data. I use oledb command to insert and update as i need to make some modifications to incoming data.I do my modifications in the procedure. But the command does not insert as the data is huge at one shot. if i try to send small data it works fine Its shows warning(yellow color) How can i achive inserting huge data effeciently please help.
View Replies !
OLEDB Command In SSIS
I AM working on DW building and i m using SSIS.I haev problem with data transformation OLEDB command.I have written a query to clean data in OLEDB command box ,but it takes whole lot of time because at a time it slects 6000 rows from the source and put in to destination but i have 300000 rows to process.How can i increase the size.
View Replies !
Need ID After OLEDB Command (insert)
Hi, I'm stuck on the following thing: After a slowly changing dimension task I replaced the OLE DB Destination task by an OLE DB Command and created the insert manually. This because I need to work further on the dataset. So I do a union all between the output of the two OLE DB Commands (insert and update). Untill here no problem. But than, because I need an ID further on, I do a lookup in the table in which I just inserted and updated my data for the right ID's. When I run this project I get the error message "row yielded no match during lookup". I don't understand this beacause I just inserted the data and I've checked, it's there. I could resolve this by splitting up in two control flows (reselect all the needed data wÃth the ID-field in my selection) but I would prefer to solve it in another way Greets, Tom
View Replies !
Error In Oledb Command
We are having package which transfers data from AS/400 to SQL server 2005, the source component is a data reader which connects to the AS/400 and pulls the data and some transformation are being made and then finally Oledb command is used which uses a Stored Procedure to Insert/Update the records. The Packages transfers nearly 2,00,000 records, but after transferring some records we get the following error: Error: 0xC0202009 at dftJDE_CUSTOMER_ORDER_ITEM, olc_JDE_CUSTOMER_ORDER_ITEM_InsertUpdate [199]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. The RPC name is invalid.". Error: 0xC0202009 at dftJDE_CUSTOMER_ORDER_ITEM, olc_JDE_CUSTOMER_ORDER_ITEM_InsertUpdate [199]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. The RPC name is invalid.". This same error is getting repeated many times. Anyone have come across this problem, any help appreciated. Thanks in advance.
View Replies !
DBSTATUS_UNAVAILABLE With OLEDB Command
Hello, I have an issue with the OLEDB Command in a package of mine where it used to work and now it doesn't. I had 4 different packages where I was bringing in a flat file, massaging the data, and calling 1 of 4 Stored procedures using the OLEDB Command. Everything was working great, then we decided to use the SSIS EBCDIC conversion in the flat file connection rather than converting to ASCII outside of SSIS. This wasn't a problem for 3 of the 4. The one I have an issue with seems to be somehow corrupt, I keep getting the error "Invalid character value for cast specification", as well as "DBSTATUS_UNAVAILABLE", for a particular column. When I re-map that column in the OLEDB Command task, re-run the package, it then tells me a different column has the exact same error. So in going through and re-mapping all of the columns, it goes back to the 1st column I had an error with and gives me the exact same error... ARRRGGGGHHHH!!!! It seems like something is corrupt in SSIS or something. Does anyone have any thoughts, other than re-writing the package from scratch? I know there's no issue with the data, I imported the same file into a test table without problems.
View Replies !
“AcquireConnection Method Call To The OLEDB Connection Manager For SQL Server Failed� Error
I have an SSIS package which takes input from Flat file and transfer the data to SQL Server using OLEDB Destination Data Flow Item. The OLEDB Connection Manager used for the destination is configured to use SQL Server Authentication for the user €˜sa€™. The package works fine without enabling the configurations. But when I enable package configuration and save the configuration of the various connection managers in an XML configuration file and then run the package it gives the following error in the validation phase: [OLE DB Destination [21]] Error: The AcquireConnection method call to the connection manager "<Connection Manager Name>" failed with error code 0xC0202009. And after the validation phase is complete the following error message is given for the package execution: [Connection manager "<Connection Manager Name>"] Error: An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client€? Hresult: 0x80040E4D Description: "Login failed for user 'sa'." Has anyone else run into this? I am running SQL 2005 9.0.1399 and VS 2005 8.0.50727.42 (RTM.50727.4200) on Windows Server 2003 Enterprise Edition SP1. Any suggestions would be welcome. TIA, Robinson
View Replies !
Parameters In A OleDb Command Transformation
Hi there, In order to prevent lookup errors in a lookup transformation, I've decided to go for an OleDb Command Transformation. This transformation should check the lookup and, if it turns out to be null, ir returns a dummy value. Otherwise, it would return the lookup value. This should be done by doing something like this: select coalesce( (select ID_Table2 from ID_Table2 where FK_Table1 = ?), 0) suposing Table2 has an atribute called "FK_Table1" that should match a column in the data flow. Now, such command result in this message: "An OLE DB record is available. Source "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Syntax eror, permission violation, or other nonspecific error". But, it I remove the coalesce and type the following command: select ID_Table2 from ID_Table2 where FK_Table1 = ? It presents me no errors and allows me to continue. Did i did anything wrong or is this something that is not possible to be done? I know i have the option to use a script task to do this operation, but that would turn the maintenance process a little more difficult. Otherwise, i know i could also re-direct the error from the lookup transformation and handle it. Though, my package has about 10 lookups and that would turn my package a lot more complex than Thanks in advance Best Regards André Santana
View Replies !
Oledb Command Transformation Output
Hi, I have two tables, Table A on Server 1 (3 ROWS) ID Name Address ID1 A B ID2 X Y ID3 M N There is another table on a different server which looks like Table B on Server 2 PKColumn ID Details 1 ID1 Desc1 2 ID1 Desc2 3 ID1 Desc 3 4 ID2 Desc 5 ID2 Description As you can see the ID is the common column for these two tables, I want to get the Query the above 2 tables and the output should be dumped into a new table on Server2. I am using the following SSIS Package OledbDataSource-------> OledbCommand(Select * from TableB where ID =?) From here, how can insert the rows returned from the oledb command into another table. Since, for each row of TableA it will return some output rows...How can I insert all these into the New Table. Please help on configuring the output of the oledb command. Thanks,
View Replies !
Function To Call Function By Name Given As Parameter
I want to write function to call another function which name isparameter to first function. Other parameters should be passed tocalled function.If I call it function('f1',10) it should call f1(10). If I call itfunction('f2',5) it should call f2(5).So far i tried something likeCREATE FUNCTION [dbo].[func] (@f varchar(50),@m money)RETURNS varchar(50) ASBEGINreturn(select 'dbo.'+@f+'('+convert(varchar(50),@m)+')')ENDWhen I call it select dbo.formuła('f_test',1000) it returns'select f_test(1000)', but not value of f_test(1000).What's wrong?Mariusz
View Replies !
OLEDB Command Usage When Update/delete On Db2
We have SS2K5 source and DB2 Target. I downloaded and installed MS OLE DB provider for DB2. It is configured correctly. The data insert works fine. But I am having problem with update/delete on DB2 when passing string parameters. The OLEDB command works fine when I hard code the values: delete from TableName where Col1='abc' and Col2='xyz' But when I use parameters the package executes successfully, but the data is not delete on DB2. Any one having similar experience or solution for this is really appreciated. Thanks,
View Replies !
OLEDB Command Parameter Type Is Different In Different Situations
Hi All, I am using OLEDB Command transformation in a data flow to update the table. Find the columns for the table EMP as follows. EmpID - int EmpName - varchar(40) EmpSal - float Status - varchar(20) I am using the following command to update the table. Update EMP set status = 'Disabled' where EmpID = ? and EmpSal = ? when I use the above condition the type of the second parameter is taking as "double precision float" as the incoming input column type is "double - precision float". This is fine. But when I use the following condition the type of the param is taking as different one. Update EMP set status = 'Disabled' where EmpID = ? and ( EmpSal + ? ) = 0 It is taking as "four byte signed integer" even though the incoming input column type is "double precision float" thus I am loosing the precision and getting error when the limit exeeds. If I use 0.0 then it is taking as "Numeric" type. If I use convert function like (EmpSal + ? ) = Convert(float, 0) then it is taking as "double precision float". Update EMP set status = 'Disabled' where EmpID = ? and ( EmpSal + ? ) = Convert(float, 0) My question is how it behaves in the above situation. Can any body clarify please? Venkat.
View Replies !
Problem With Update Statement In OLEDB Command
HI, In my mapping i have used one OLEDB command which updates a table. It updates 70 columns of that table. The problem is that it is taking long time to execute that(almost 15-20 minutes) It is updating almost 3k-5k rows. I tried to put the update statement in SP and called that in OLEDB command. Still it is taking same time. Please advice how to solve this problem. Thanks in Advance.
View Replies !
Maxmimum Number Of Parameters For OleDB Command
I have a stored proc with 28 commmands but only 24 are loaded. If I move the parameters around the ones that didn't show are visible and the ones after the 24th parameter don't show up. Is there some sort of limit on parameters for OLEDB commands that execute stored procs in the exec procname @p = ? construct?
View Replies !
Staging Data In ##Table In A OLEDB Command Task
Hi All, In one of my interfaces,i am trying to Stage data in a ##table from a Flat file,so that i can iterate through the data in for each loop afterwards. I have written a stored Proc to do this.But what i am observing is in the ##Table only the last Row will be persisted. The SP looks like this Code Snippet CREATE PROCEDURE USP_SVInsS093Data_V001 @DetailRECTYPE nvarchar(5), @StoreNumber int, @Product nvarchar(20), @Planogramref nvarchar(20), @DisplayGroup nvarchar(5), @ModSequence int, @Shelfnumber int, @Productposition int, @StartModnumber nvarchar(20) AS SET NOCOUNT ON BEGIN if object_id('tempdb..##S093_TempTable') is not null drop table ##S093_TempTable CREATE TABLE ##S093_TempTable( [DetailRECTYPE] [nvarchar](5) NULL, [StoreNumber] [int] NULL, [Product] [nvarchar](20) NULL, [Planogramref] [nvarchar](20) NULL, [DisplayGroup] [nvarchar](5) NULL, [ModSequence] [int] NULL, [Shelfnumber] [int] NULL, [Productposition] [int] NULL, [StartModnumber] [nvarchar](20) NULL ) INSERT INTO ##S093_TempTable ([DetailRECTYPE] ,[StoreNumber] ,[Product] ,[Planogramref] ,[DisplayGroup] ,[ModSequence] ,[Shelfnumber] ,[Productposition] ,[StartModnumber]) VALUES ( @DetailRECTYPE , @StoreNumber , @Product , @Planogramref , @DisplayGroup , @ModSequence, @Shelfnumber , @Productposition , @StartModnumber ) If i have a select query after the Data Flow task only the last row is returned. Now how to make the ##Table keep all the rows. Any help will appreciated. Thanks in Advance... Cheers Srikanth Katte
View Replies !
Handling Updates In SSIS With OLEDB Command Transformation
Hello My package flow is like This OLEDB SOURCE --> LOOK UP TRANSFORMATION | lookup output / error output(for new Inserts) (updated records) / / DERIVED COLUMN DERIVED COLUMN TRANSFORMATION1 TRANSFORMATION1 | | v v OLEDB COMMAND TRANSFORMATION OLEDB DESTINATION (inserting new records to (Updating records in destinationTable) destination) in this senario new records r insrted properly but though package runs without error records not get updated in Destination. In OLEDB COMMAND my query is like below, UPDATE TARGET_SCD_1 SET CURRENTSTATUS = ?, CURRENTSTATUSEFFECTIVEDATE=?, PROPOSALEFFECTIVEDATE=?, UNDERWRITINGEFFECTIVEDATE=?, TECHLAPSEEFFECTIVEDATE=?, WITHDRAWNEFFECTIVEDATE=?, DCSEFFECTIVEDATE=?, PREPOSIONEFFECTIVEDATE=?, INFOURCEEFFECTIVEDATE=?, LAPSEEFFECTIVEDATE=?, SURRENDEREFFECTIVEDATE=?, FLCEFFECTIVEDATE=?, CANCELLEDEFFECTIVEDATE=?, DCIEFFECTIVEDATE=?, REC_UPT_DT=? WHERE O__NUM = ? In advanced editor of OLE DB I hv created additional 16 paramater columns though i assign datatype as numeric to tht columns when i press refresh automatically it changes to DT_STR. My destination table columns r numeric . I though due to this datatype mismatch the error came So i change the datatype of dest to varchar to make compatible with OLEDB Comand Transformation. THN also no Use NO UPDATES package is running without error but records not get updated. if change the flow like below OLEDB SOURCE --> LOOK UP TRANSFORMATION | lookup output / error output(for new Inserts) (updated records) / / DERIVED COLUMN DERIVED COLUMN TRANSFORMATION1 TRANSFORMATION1 | | v v OLEDB COMMANDTRANSFORMATION / (Updating records in / destinationTable) / / / UNION ALL TRANSFORMATION | v OLEDB DESTINATION In This Case The updated record get inserted in the target as wel as the old remains as it is means m getting one additional record. kindly help me to figure out the bug M frusted with this issue please.............
View Replies !
OLEDB Command Transform Error Code: 0x80004005
I'm receiving an Error Code: 0x80004005 ... a "non-specific error" when trying to use a fairly simple insert in the oleDB command transform. SQL command works fine if I specify the parameters in the values clause of the INSERT statement. If however, I try to use the parameters in setting a variable, I get the 0x80004005 error. Is this a known issue/limitation, or am I just reallly doing something wrong?
View Replies !
Error Output In Oledb Command Advance Editor
I have a data flow and inside the data flow , i have a ole db source and ole db command task to execute an insert transaction ( SP).. i would like to save the error output if the insert didn;t happend into a error log table.. but when I darg an error output line ( red) to another ole db command to insert an error log , i can only see two columns( error code and error column) are available in OLEDB command advance editor related to errors.. this doesn;t tell you much information about the error.how can i grap the error reson(desc) as the error output and store into a erro log table? so that i can see what the problem is?
View Replies !
OLEDB Command Gives An Error For The Parameters Used In The Second Insert Statement
Hi, First script mentioned here does not work while the second script works even though they are doing the same thing and first one is good way. OLEDB Command gives an error for the parameters used in the second insert statement of the first script. Why is it so? --First Script INSERT INTO PrimaryKeyTable(ID, FirstName) VALUES (?,?) If @@rowcount=1 BEGIN DECLARE @MaxID as int SELECT @MaxID =max(AutoID) FROM dbo.PrimaryKeyTable --AutoIncremented column INSERT INTO [ForeignKeyTable] ( [MaxID] ,[Cost] ,[MarkDownDollars] ,[VersionCode] ) VALUES(@MaxID,?,?,'act') END -- Second Script INSERT INTO PrimaryKeyTable(ID, FirstName) VALUES (?,?) If @@rowcount=1 BEGIN DECLARE @Cost AS money SET @Cost=? DECLARE @MarkDownDollars AS money SET @MarkDownDollars=? DECLARE @MaxID as int SELECT @MaxID =max(AutoID) FROM dbo.PrimaryKeyTable INSERT INTO [ForeignKeyTable] ( [MaxID] ,[Cost] ,[MarkDownDollars] ,[VersionCode] ) VALUES(@MaxID,@Cost,@MarkDownDollars,'act') END
View Replies !
Incorrect Data Is Inserted Into The SQL Table From OLEDB Command
I have an OLEDB command in a package that inserts the data into two tables. When I run the package, the data is getting inserted as divided by 100 of original data for derived columns. For example: Say col1 is my input column from flat file with value 1000. I am dividing it by 100 in Derived column and then inserting into the table. So the value 100 should be inserted into the table. But it is not so, the value 1 is getting inserted. Two Tables involved here have referential integrity constraints between them. SQL Script for the operation I am doing looks like the one just below INSERT INTO PrimaryKeyTable(ID, FirstName) VALUES (?,?) If @@rowcount=1 BEGIN DECLARE @MaxID as int SELECT @MaxID =max(AutoID) FROM dbo.PrimaryKeyTable --AutoIncremented column INSERT INTO [ForeignKeyTable] ( [MaxID] ,[Cost] ,[MarkDownDollars] ,[VersionCode] ) VALUES(@MaxID,?,?,'act') END But this script did not work in OLEDB commandL So I wrote the below script for which I am facing the problem mentioned INSERT INTO PrimaryKeyTable(ID, FirstName) VALUES (?,?) If @@rowcount=1 BEGIN DECLARE @Cost AS money SET @Cost=? DECLARE @MarkDownDollars AS money SET @MarkDownDollars=? DECLARE @MaxID as int SELECT @MaxID =max(AutoID) FROM dbo.PrimaryKeyTable INSERT INTO [ForeignKeyTable] ( [MaxID] ,[Cost] ,[MarkDownDollars] ,[VersionCode] ) VALUES(@MaxID,@Cost,@MarkDownDollars,'act') END
View Replies !
Output Param Of Stored Proc - Oledb Command
Hello This is my first post so please be gentle!! I have a stored proc that returns a value: set ANSI_NULLS ON set QUOTED_IDENTIFIER ON SET NOCOUNT ON GO -- ============================================= ALTER PROCEDURE [dbo].[spPK] -- Add the parameters for the stored procedure here @varNSC varchar(4), @varNC varchar(2), @varIIN varchar(7), @varIMCDMC varchar(8), @varOut as int output AS Declare @varPK int set @varPK = 0 BEGIN --This checks Method 1 --NSC = @varNSC --NC = @varNC --IIN = @varIIN begin if exists (select Item_id From Item Where NSC = @varNSC and NC = @varNC and IIN = @varIIN) set @varPK = (select Item_id From Item Where NSC = @varNSC and NC = @varNC and IIN = @varIIN) set @varOut = @varPK if @varPK <> 0 Return end [There are some more methods here] Return END How do I get at the output value? I have tried using derived column and ole db command but can't seem to grasp how to pass the value to the derived column. I can get oledb command to run using 'exec dbo.spPK ?, ?, ?, ?, ? output' but don't know what to do from here.
View Replies !
TSQL Command To Call *.sql Files
I have several *.sql files with schema/data changes to be applied to ourcurrent database. Is there a way to create a TSQL script that could be runfrom the SQL Query Analyzer that would sequentially call the *.sql files?i.e.call schemaVersionCheck.sqlcall addFieldToLoanTable.sqlcall updateLoanTrigger.sqlcall updateSchemaVersiontia.dynoweb
View Replies !
Use Xp_cmdshell To Call Winzip With The Command
Hello, how may use xp_cmdshell to call winzip with the command, i wrote this but it doesn't work ; declare @cmd varchar(2000) select @cmd = 'c:program_fileswinzipWzunzip.exe c:AttatchmentsTEST_PJ.zip c:AttatchmentsTEST_PJ.zip' exec master..xp_cmdshell @cmd
View Replies !
Oracle OleDb Provider As Source
Guys, I am having a nightmarish time getting an Oracle Connection Manager working as a source in my SSIS package. The CM is called "OLTP_SOURCE". When I inspect the configuration and test connection, it succeeds, however when I go to run the package (both in debug mode and via DTEXECUI) I get the following error: The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009 After this happens, if I go into an OLE DB Source within a DFT, I get the following: No disconnected record set is available for the specified SQL statement. Now, if I go back into the CM, enter the password and test, it succeeds. From this point, I will go to preview the data in the OLE DB Source, and it comes back fine. However, when I go to run the package, I get the same error time and time again: The AcquireConnection method call to the connection manager "OLTP_SOURCE" failed with error code 0xC0202009 The quick reader will suggest that the password is not being persisted. To this end, I have tried each of the following techniques to no avail: 1. Double, Triple and Quadruple check that the "save" password option in the CM is checked. 2. Hardcode the connection string in the dtsx XML-behind. 3. Enable Package Configurations and hardcode the connection string in the dstsconfig file. 4. Run the dtsx file using DTEXECUI, providing it with the configuration (that includes the hard-coded password). 5. Run the dtsx file using DTEXECUI, providing it the connection string in the Connection Managager override UI. Can anyone help shed some light on what might be going on? So far, it is obvious that there has to be something that I am doing wrong because (syntax dialect differences aside) I can't imagine that Oracle sources should be this much of a headache. Thanks, Rick
View Replies !
Microsoft OLEDB Provider Oracle
Hi, Previously i was using oracle8i with ssis.ssis was working fine.later i have upgraded 8i to oracle 9i.now when ever i try to establish a new connection using Microsoft OLEDB Provider for Oracle.i am getting the following error "Oracle error occurred, but error message could not be retrieved from Oracle" .but i am able to access the oracle 9i database thru pl/sql and toad. what could be the problem? Thanks Jegan.T
View Replies !
SSIS OLEDB Issue With Oracle
I have several SSIS packages that test out without problems on my dev box when connecting to an Oracle server, both from inside BIDS IDE and from the command line with DTexec. The problem happens when running these packages from the app server that will be used for production; the packages get through the validation, preparation and pre-execution phases but crash when starting the execution phase with this error: " Code: 0xC0202009 Source: Import Level tables Level1 Source [1261] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E07. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E07 Description: "ORA-01861: literal does not match format string". I've Googled this and it often refers to a date issue. I am not writing to Oracle but importing to SQL Server by using SSIS import tasks, and my question is why would this work without problems from my box but not on this app server? Both machines have the same version of Oracle client installed. My box has the client SQL server with BIDS and the app server only has the full version of SSIS without SQL Server installed. At this point I'm trying to determine if this is an Oracle issue or SSIS. Any ideas?
View Replies !
Oracle OLEDB Connection Problem
I have two Oracle Servers (dev and prod). I have a package set up reading from the dev box and all has been working well. I am using Data Sources defined in the package using the Oracle OLEDB client. I have data source views defined under the data source. When I try to add tables to the data source view, I get "Hour, Minute, and Second parameters describe an un-representable DateTime". In the OLEDB Source Properties, I can't get the list of tables at all. If I use the .NET Oracle provider, I can add the tables in the DSV but then I can't see my connection manager in the OLEDB Source Properties (because of the .NET Provider). Any ideas here? This has been working fine for the last few weeks on the dev box and then all of a sudden today I'm having problems trying to switch to prod.
View Replies !
Connecting To Oracle 8 Database Using OLEDB
Help, I'm attempting to connect to an Oracle 8 database using the microsoft OLD DB for oracle driver. It works fine connecting to a 9i database but when I attempt to connect to the 8 database I get ORA-12537 TNS Connection Closed. I can connect to the database fine using sqlplus on the machine. Any ideas would be appreciated. Thanks Stapsey
View Replies !
OLEDB Command Stage Error In SLOWLY CHANGING DIMENSION
I have created a sample dataflow to parse the employee details (empid,empname,empaddr) from a flat file to oracle 9i database table named employee(columns : empid,empname,empaddress - All are varchar2(15)) using SLOWLY CHANGING DIMENSION transformation for insert/update on the table. EMPID as Businees key EMPNAME and EMPADDR as changing attributes. Connection string is using Microsoft oledb provider for oracle. I am getting the following oledb command error. ----------------------------------------------------------------------------------- TITLE: Microsoft Visual Studio ------------------------------ Error at Data Flow Task [OLE DB Command 1 [2007]]: An OLE DB error has occurred. Error code: 0x80040E51. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E51 Description: "Provider cannot derive parameter information and SetParameterInfo has not been called.". Error at Data Flow Task [OLE DB Command 1 [2007]]: Unable to retrieve destination column descriptions from the parameters of the SQL command. Warning at {CF5DCB64-279E-45A4-A9A8-FF2FBB130980} [Insert Destination [1972]]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used. ------------------------------ ADDITIONAL INFORMATION: Errors were encountered while generating the wizard results: Error at Data Flow Task [OLE DB Command [1996]]: An OLE DB error has occurred. Error code: 0x80040E51. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E51 Description: "Provider cannot derive parameter information and SetParameterInfo has not been called.". Error at Data Flow Task [OLE DB Command [1996]]: Unable to retrieve destination column descriptions from the parameters of the SQL command. Error at Data Flow Task [OLE DB Command 1 [2007]]: An OLE DB error has occurred. Error code: 0x80040E51. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E51 Description: "Provider cannot derive parameter information and SetParameterInfo has not been called.". Error at Data Flow Task [OLE DB Command 1 [2007]]: Unable to retrieve destination column descriptions from the parameters of the SQL command. For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=ScdWizardGenerationErrors&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------
View Replies !
Issue With The Use Of OLEDB Command Task To Update Db2 Target Table
I am having a problem on updating data in DB2 target table. I followed BJ Custard's (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1058272&SiteID=1&mode=1)(thanks amillion!) post and configured OLEDB destination to insert data. But I have to also update or delete data from the target table based on flag from source. I tried using OLEDB command which uses the OLEDB connection created by following the steps posted in above link. Trail 1real requirement): When I used the SQL query: delete from table where Col1=? and Col2=? I am unable to map to the parameters. When I click refresh button after writing the query, I get "There is a data source column with no name. Each data source column must have a name." message. Added to before message, there are no parameters to map to. Trail 2: When I hard code the parameters : delete from table1 where Col1='abc' and Col2='xyz' no parameters will come up, so no mapping. So when I execute the mapping I get the following error: Error: 0xC0202009 at Load .....................................................: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E00. Lookup on above error codes show those are related more to target Db2 database. I am sure some one might have used the OLEDB command task, not only just insert task. Any help is really appreciated.
View Replies !
OLEDB Command Giving Error For Decalre And Set Statements At The Top Of The SQL Script
Hi All, I have an OLEDB command in my package that has to execute some SQL script. But when I declare and set a variable at the top of all code, The OLEDB gives an error in column mappings tab. My DQL script is as shown below DECLARE @Cost AS money SET @Cost=? --Some update statements a table OLEDB Command works if write the declare and set statements after update statements. Like below. But I don€™t need it. --Some update statements a table DECLARE @Cost AS money SET @Cost=? I also observer that,Oledb Command gives error for the code given below. Just paste the following Script in OLEDB command, it gives error in column mapping tab DECLARE @Cost AS money SET @Cost=? Any Idea on this behaviour? Thanks in advance..
View Replies !
How To Call A Stored Procedure In An Insert Command
hi,i had a small doubt , i have a table xxx with two columns (a int,b int) and i have inserted 5 rows my query is to add the two colums using astored procedure and the result has to be displayed in an separatecolumn --this has to be done only stored procedures ---i know how tosolve the problem using computed columns conceptlike thiscreate table yyy(a int ,b int ,total as a+b)insert into yyy values (12,13)select * from yyyi need the answer using stored procedures---is it possiblepls help mesatish
View Replies !
Could Not Resolve Service Name - Oracle 8 And MS OLEDB Provider
Trying to used DTS from SQL Server 7 to import a table from Oracle 8 DB to SQL Server. SQL Server has Oracle 8 connectivity installed and a database instance setup. Connection using the instance works from Oracle Enterprise manager and all Oracle tools. The MS OLEDB provider for Oracle fails to connect : could not resolve service name. I have this working on a different server with the same setup (SQL Server 7 SP 2 + All Oracle 8.0.5 connectivity). WHAT AM I MISSING?
View Replies !
CacheType In Lookup For Oracle OLEDB Connection
Hi, 1. If I have millions of rows to be compared, then which cache type is prefereed for lookup, Partial or no caching? 2. If I have lookup connected to Oracle Oledb, cache type as partial and SqlCommandParam as following select * from (SELECT ORDER_ID, OPER_KEY, STEP_KEY, SUM(OCCUR_COUNT) AS OCCUR_COUNT FROM SFWID_OPER_DESC_EXPLD GROUP BY ORDER_ID, OPER_KEY, STEP_KEY) refTable where refTable.ORDER_ID = ? and refTable.OPER_KEY = ? and refTable.STEP_KEY = ? then it doesn't allow me to add the parameters from Advance tab of Lookup transformation edition, and raises following error "Provider cannot derive parameter information and SetParametInfo has not been called" what am I missing?
View Replies !
Handling Special Characters Using Oledb To Oracle
hi, i am using oledb to connect to oracle. i want to know if there is a way to handle different character sets in this type of connection. for sql to sql, i have been using auto translate in the connection string. what about for sql oledb to oracle? how can i make sure that the data from sql to oracle is transferred as is? many thanks.
View Replies !
OleDb Source Error - Connecting To Oracle 9i
Hi, I have my datasource in Oracle9i and destination is Sql2005. I am connecting to Oracle 9i through OLEDb provider and when I connect to my DataSource using OLE DB Data Source, I get the following error: Warning at "guid code": Cannot retreive the column code page info from the oledb provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale Id will be used. Could anyone please help me trouble shoot this problem. Regards, Sudhakara.T.P. sudhakaratp@hotmail.com
View Replies !
Parameters For OLEDB Oracle Source Query
Provider cannot derive parameter information and SetParameterInfo has not been called. (Microsoft OLE DB Provider for Oracle) I am getting the above error while opening the parameter box at OLEDB source for Oracle using SQL command option at Data Access Mode?? Can you any one please help me in this regard and trouble shoot this problem..
View Replies !
Oracle OLEDB In SSIS - Problem With 64bit
I have a 64bit Windows 2003 Server with SQL 2005 (64bit) installed. I would want to fetch data from an Oracle database that resides on a different server and load it into SQL2005 through SSIS. This is part of migration from SQL2000. I have tried to run Oracle client 10G (64bit) with no success, since SSIS is a 32bit application. I uninstalled the 64bit Oracle client and installed the 32bit version and can create an Oracle OLEDB Provider as Connection Manager and preview the data from the Oracle source, but when I run the package it displays an error almost directly and the transfer stops. -------------------------------------------------------------------- [OLE DB Source [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "BOFLEV.bofinc" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. -------------------------------------------------------------------- I have tried to change the path for SSIS from Program Files (x86) to ProgramFilesx86 with no luck. I have changed the Run64BitRunTime to false. Is there anyone that has managed to resolve this, I really do not want to use a third party software for this!
View Replies !
Oracle OLEDB Drivers Problem With Numbers
Hi All: I am using oracle oledb drivers to write to a oledb destination. if i give decimal values to decimal fields in the source table, i get the same in destination. But if the input is integers, in some cases, the value in the destination is different from that of source Source Target 50 50.00 100 0.000 111 111.000 600 0.0000 520 20.00 178 178 4546.50 4546.50 I have Sql server SP2 9.0.3042 installed on my machine. Please let me know if theres something i am missing out. Thanks, Vipul
View Replies !
Missing Oracle OLEDB Provider In SSIS
Windows 2003(64bit) server, SQL 2005 Server(64bit), Oracle client 10G rel2 (64bit) is installed. But when I am going to create a datasource to the Oracle database the Oracle OLEDB Provider is missing, the only Providers avaliable is from Microsoft. I have tried to install ODAC (64bit) with no result. Anyone who have come across this problem and how do I do to resolve it? BTW! Is there a way to try communication with the OLEDB provider from the commandprompt?
View Replies !
Call Oracle Proc From SQL
This is the error: [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionCheckForData (CheckforData()). Server: Msg 11, Level 16, State 1, Line 0 General network error. Check your network documentation. Connection Broken This is the code: DECLARE @L_OUT VARCHAR (8000) declare @custNo VARCHAR(50) declare @dc VARCHAR(255) declare @Part VARCHAR(255) declare @ecomPro varchar(8000) set @dc = '940' set @part = 'T6' set @custNo = '352668' exec @ecomPro = [LS]..[Y].[oracle_package.package_body] @cuno = @custNo, @dc_id = @dc, @part_qty = @part, @a_out = @L_Out OUTPUT I want the output from the proc to update a MS-SQL table -- HELP!!
View Replies !
Oracle Oledb Provider Not Registered In Local Machine
Hi, I am trying to establish a connection to an Oracle database using the following code in a script task: Dim oOleDbConnection As OleDbConnection Dim sConnString As String = _ "Provider=OraOLEDB.Oracle;" & _ "Data Source=DBxxx;" & _ "User ID=Userxxx;" & _ "Password=Passxxx" oOleDbConnection = New OleDb.OleDbConnection(sConnString) oOleDbConnection.Open() When I execute the script task, I receive the following error: The 'OraOLEDB.Oracle' provider is not registered on the local machine. Am using the correct provider? I do not know how to resolve the said error. Here are some facts: Oracle 8i is installed. Tnsnames.ora is updated. I have successfully connected to Oracle SQL *Plus to test the above credentials. Please help. Thanks.
View Replies !
|
TRACKER
