Open An ODBC Connection To A DB And Must Use A Connection That Looks Like This: DSN=myDSNname.

Dec 11, 2006

In my ssis package,

I have a DSN connection like this: "DSN=myDSNname". Which decide from i have to pull the data.

By using OLE DB Source Editor, I want to assign that ODBC Connection to it.

By data source Reader i can achive this but where i have to pass the hard-code SQL Query that i don't want.

i'm using the variable for dynamic SQL command.

Thanks.

Manoj

View 5 Replies


ADVERTISEMENT

Can't Find SQL Native Client In ODBC Connection Manager In SQL Server Open Database Connectivity (ODBC)

Feb 13, 2007

I apologize if this is not the correct forum for this posting. Looking at the descriptions, it appeared to be the best choice.

I am running Windows XP Pro SP2. I have installed the SQL Native Client for
XP. However, when I try to add a new data source through ODBC Connection
Manager, SQL Native Client is not listed as an option. I have followed this procedure on three other systems with no problems. What would be causing the
SQL Native Client to not show up in the list of available ODBC data sources?

View 4 Replies View Related

ExecuteReader Requires An Open And Available Connection. The Connection's Current State Is Closed.

Apr 26, 2007

I am accessing SQL2005 with C# code using OleDbConnection.



A try and catch block catches the following error once a while between the Open() and Close() of the connection:

ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.



I do not even have any idea where to start to debug this. The ExecuteNonQuery() runs a delete SQL query. It works 99.9% of the time. I do not see anything wrong when this error happens.



Any hint would be greatly appreciated.



View 9 Replies View Related

Remote Connection Refused When Creating ODBC Connection To SQL Server 2005

Aug 30, 2006

When I create a new odbc connection to a SQL server 2005 Db I get a failure telling me dat de SQL server does not allow remote connections.

How can I allow the server to allow this.



Any help appreciated



regards

View 1 Replies View Related

Error While Establishing A Connection To The SQL Server 2005 - Could Not Open A Connection To SQL Server

Apr 12, 2007

Hi, I had an old web application created during asp.net 1.1 and it have a connection problem with the sql server 2005 when it is mirgrated to a new webserver with dotnet framework 2.0 platform. I have enabled the remote access(TCP/IP and named pipes) in sql server 2005, did all the neccessary things, check whether the TCP/IP is enabled, named pipe is enabled...  I created another web application using VS 2005. The database connection works perfectly well.This are the connectionString from the old web application.<appSettings>    <add key="ConnectionString" value="Server=127.0.0.1;Database=somedb;User id=user; Password=somepassword; Trusted_Connection=False; POOLING=FALSE"/></appSettings>  Thankyou in advance! 

View 4 Replies View Related

Leave The Connection Open Or Always Open And Close Immediately?

Jun 7, 2006

Hi there,
 
I got an approach like that:
1) Read something from DB - check the value, if true stop if false go on2) Read the second Value (another SQL Statement) - check the value etc.
Now I could open the connection at 1) and if I have to go to 2) I leave the connection open and use the same connection at 2). Is it ok to do that?
The other scenario would be opening a connection at 1), immediately close it after I read the value and open a new connection at 2).
Thanks for the input!

View 4 Replies View Related

Integration Services :: Unable To See 64bit ODBC Driver From SSIS Odbc Connection?

Jun 1, 2015

I am using SSIS 2014 with the below .net framework version and installed in Windows server 2012 R2 . I have installed my client's odbc drivers (both 32 bit and 64 bit) in my production server and created ODBC system DSNs for 32 bit and 64 bit.

When i open SSIS 2014 and tried to create the odbc connection but i can able to see only the 32 bit system DSN connection ,i can't able to see my 64 bit odbc system dsn connection.

Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.51650

SQL Server Integration Services   
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0

And i installed my client odbc drivers(32,64 bit) and created ODBC system DSNs in my local system and when i open ssis 2014 and i can able to see both the ODBC system DSNS(32,64) connections from SSIS ODBC connection.

I am using below version of .net framework in my local system which was installed in windows 7 and i have SSIS 2012 also installed in my system and i can able to see both ODBC connections using 2012 as well in my local system.

Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.50938

SQL Server Integration Services   
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0

why i can not see the ODBC 64 bit system DSN connection from SSIS in my production server ?

View 9 Replies View Related

Cannot Set Connection Property Of Backup Database Task If Connection String Is Customized In Connection Object

Aug 23, 2006

I added a connection (ADO.NET) object by name testCon in the connection manager - I wanted to programmatically supply the connection string. So I used the "Expressions" property of the connection object and set the connectionstring to one DTS variable. The idea is to supply the connection string value to the variable - so that the connection object uses my connection string.

Then I added a "Backup Database Task" to my package with the name BkpTask. Now whenever I try to set the connection property of BkpTask to the testCon connection object, by typing testCon, it automatically gets cleared. I am not able to set the connection value.

Then after spending several hours I found that this is because I have customized the connection string in testCon. If I don't customize the connection string, I am able to enter the "testCon" value in the connection property of the BkpTask.

Is this an intrinsic issue?

View 2 Replies View Related

Open Connection

Nov 1, 2007

Hello everybody I would like to know more about the number of possible connection to a sql server is it by pool ? or there is max for all the database ? all the server ? how I can get the number of connection open ? Thx in advance 

View 2 Replies View Related

Could Not Open Sql Connection

Sep 22, 2007



Hi,
I hope this is right place to ask for help.If it is not, Please show me where and if it is please Help me
I using Window Vista bussiness, Microsoft visual 2005 professional edition, Microsoft SQL server express edtion
I have created table on Database.
My sql server name is KYAW-HQ
**but in the bar it shown like as KYAW-HQSQLEXPRESS
My data base name is kyaw
I have already Enabled Name Pipes and TCP/IP setting in sql studio management tool express
I using window authentication to log in to sql server management studio express.

My coding for c# is as follow:


private void button4_Click(object sender, EventArgs e)

{

//connect sql connection

SqlConnection con = new SqlConnection("Server=KYAW-HQ;Database=kyaw;UID=;PWD=;");

//open sql conection

con.Open();

SqlDataAdapter ad = new SqlDataAdapter("Select * From kyaw", con);

DataSet ds = new DataSet();

ad.Fill(ds, "kyaw");

dataGridView1.DataSource = ds.Tables[0].DefaultView;

con.Close();





}



After I click the button the error has shown like below

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).

Please tell me what i have to do.
If someone read me, please tell me and advice me how to fix above problem.
Thanks

View 9 Replies View Related

Cannot Open SQL Connection

Jan 22, 2008

Hello!

This code sample stops when I try to open a connection (see below). Ther error message reads "pipe provider , error 40". The help suggests that the credentials are wrong. I don´t think so, could there be another problem? Tough question but, I would appreciate any help.


System.Data.SqlClient.SqlConnection sqlConnection1 =

new System.Data.SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings["SwimAdminConnectionString"].ConnectionString);



System.Data.SqlClient.SqlCommand cmd = new System.Data.SqlClient.SqlCommand();

cmd.CommandType = System.Data.CommandType.Text;

string sql1 = Session["txtFirstName"].ToString();

string sql2 = Session["txtLastName"].ToString();

cmd.CommandText = "INSERT dbo.Member (mbrFirstName, mbrLastName) VALUES (sql1, sql2)";

cmd.Connection = sqlConnection1;

sqlConnection1.Open(); //EXCEPTION HERE!!!

cmd.ExecuteNonQuery();

sqlConnection1.Close();

View 26 Replies View Related

Could Not Open A Connection To SQL Server

Nov 25, 2007

Hi, Has somebody had a problem like this before? Exception Details: System.Data.SqlClient.SqlException:
An error has occurred while establishing a connection to the server.
 When connecting to SQL Server 2005, this failure may be caused by the
fact that under the default settings SQL Server does not allow remote
connections. (provider: Named Pipes Provider, error: 40 - Could not
open a connection to SQL Server) That's part of the code:        SqlConnection con;        string sql;        SqlCommand cmd;               con=new SqlConnection("Data Source=elf/SQLEXPRESS;Initial Catalog=logos;Integrated Security=SSPI;");        sql="SELECT max(id_kandydat) from Kandydat";        con.Open();         cmd=new SqlCommand(sql,con);        int id = Convert.ToInt32(cmd.ExecuteScalar());        con.Close();         SqlDataSource7.InsertCommand="INSERT INTO Kandydat_na_Kierunek(id_kandydat, id_kierunku, id_stan) VALUES ("+"'"+id+"'"+","+"'"+DropDownList1.SelectedValue+"'"+","+'1'+");";  I don't really get it. I'm nearly 100% sure that before some changes in my project this had worked perfectly. Does anybody have any idea how to make it work again? I would be very grateful for any help. And, yesy, I know it is quite common error, but proposed solution found didn't help.Regards,N.  

View 5 Replies View Related

Leave DB Connection Open

Mar 20, 2008

Hello, I have always closed my db connections asap after opening them and have always thought this was the best practice.  But now I am wondering if I can just leave the connection open.
I created a windows service which runs on a timer and executes every 5 seconds.  The problem is that the code takes longer than that to process and the code may be executing three times at once. Im worried that since I use the same connection each time the code executes that a connection opened by the first run through may be closed or reopened by the second or third running of the code resulting in an error.  The connection is opened and closed about 10 times each time the timer event fires.  Should I open the connection once and leave it open when the service is started and close it when it is stopped or on any error?
 
Thanks

View 2 Replies View Related

Could Not Open A Connection To SQL Server

Jun 3, 2008

i m getting this exception
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"
i want to know that this exception is from my end or on Server End. because 5 to 6 month my application works fine but in these days i m getting this exception 5 to 20 times a day
your help will really appricate...
 

View 5 Replies View Related

How Trace That Where The Connection Is Open

Jun 14, 2006

hi to all,
I create a web application in asp.net with sql server 2000, I use always close connection in .net code as my consern but when run my application then visit page to page give a error "General network error " message . then i check lots of connection is sleeping state in process info in sql manegment(current activity) Now i open the particular processId in Process info show open connection with any storeprocedure name and show .net sqlclient data provoider referance as open connection which is fetch the data from sql then i check in code find really the connection which is got data by that store procedure is not close properly and i close it. This is ok but one problem is that some procesId show  blank info with .net sql client data provoider. so how can i find where these conneciton is open in my applicaton because this processId doesn't give any clue for it , it show nothing only blank but status is sleeping. If any help have this context then quick feedback.
Thanks

View 2 Replies View Related

Could Not Open A Connection To SQL Server

Feb 20, 2006

Hi,

One issue has got me stuck while getting to build an application(ASP.NET/SQLSERVER). Whenever I try to connect to SQL Server 2005 (installed on local host) using Visual Web Developer 2005 Databse Explorer, I get the following error message:

"An error has occured while establishing a connection to the server.
when connection to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - could not open a connection to SQL Server)"


NB:
- on SQL Servers' Surface Area Configuration, Remote connections are set to "Local and Remote connnections" and "Using both TCP/IP and named pipes".

ANyone with a solution? pse help

View 3 Replies View Related

Error: 40 - Could Not Open A Connection

May 8, 2007

I am developing a web service that uses a sql data connection.



The sql database is on a server, and the development version of my web service is on my pc.



I can connect/access the data accross my network when I run the service on my PC, but as soon as I put the web service onto the server(with the sql) it displays, the service wont function - error: 40 - could not open a connection....



I presume that sql is configured correctly as I am recieving data back when I request it accross the network. I dont understand why it wont work when I have the service on the server with the sql?



Any help will be appreciated.



View 4 Replies View Related

Could Not Open A Connection To SQL Server

Jan 25, 2008

tried to install SQL Server 2005 in a fresh installed Windows 2003 SP2. And this server is a workgroup member, not a member of a domain.

The services (Database service, integration service, reporting services and so on) work fines, but I could not connect to server

I checked the log, I found the following error,error :40-Could not connect to SQL Server(Microsoft SQL Server,Error-1231).


I never had this problem and this time, I really got the trouble and do not have solution.

Who have ever encounter this problem? Or someone can help me?

Thanks.

View 1 Replies View Related

Open A DSN Connection In TSQL

Sep 21, 2006

I'm trying to update an SQL DB from data in Quickbooks. I am trying to find if I can open a dsn connection in a stored procedure, called from an ASP page, to the quickbooks db using odbc. The driver I have for odbc does not allow for linked servers. I'm very new to stored procedures and such so please bear with me. Thxs.

View 3 Replies View Related

Connection.Open(); Problem

Apr 17, 2008

hello ,i write this code
string sql="SELECT * FROM Customers";
SqlConnection connection = CollectionManager.getHotelConnection();
SqlCommand command = new SqlCommand(sql,connection);
command.CommandType = CommandType.Text;
command.ExecuteNonQuery();
result = command.ExecuteScalar();
connection.Open();
...
and when the debug goes to
connection.Open ()
it throws me this

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)

but i have all enabled ,browser running normally ,name pipes tcp ip enable all ,but it makes me this thsi all the time what mayb e huppens there?

View 4 Replies View Related

How To Open A Second Connection While In A Datareader

Dec 13, 2007



Hi,

I hope someone can help me with this.

I have created a data reader to loop thru a table and build an update statement.
Now I need to execute this statement in the datareader loop but the connection object is in use.

I tried creating another connection object but get an error:
"The context connection is already in use."

Is there a way to open another connection while the main context connection is open.
Just to make it clear, I do not want to read all the rows into memory first and then call update, it has to
happen for each iteration of the datareader.

Thanks.
--
With Regards
Shailen Sukul
Software Architect/Developer/Consultant
(BSc | Mcts (Biztalk (IP)) | Mcpd | Mcts (Web, Win, Dist Apps) | Mcsd.NET | Mcsd | Mcad)
Ashlen Consulting Services Pty Ltd
(http://www.ashlen.com.au)
MSN | Skype | GTalk Id: shailensukul
Ph: +61 0421 277 812
Fax: +61 3 9011 9732
Linked In: http://www.linkedin.com/in/shailensukul

View 7 Replies View Related

Open Connection In Sql Server

Feb 9, 2006

Try
Dim l_connString As String

l_connString = "Server=kangalert;database=Order;user id=sa;password=123;"
m_cn = New SqlConnection(l_connString)
m_cn.Open()

Catch ex As SqlException
Dim l_sqlerr As SqlError
For Each l_sqlerr In ex.Errors
MsgBox(l_sqlerr.Message)
Next
End Try



i got this in my mobile application, which try to open a connection directly to the sql server, but i got the following message

General Network error, check your network documentation.

View 7 Replies View Related

ODBC Connection

Oct 17, 2000

Has anyone had an issue with the ODBC data source that when you set it up for SQL, it does not retain the username and password you entered and keeps defaulting back to the NT windows verification instead of using the SQL verification that you choose?

I add a datasource, select validation based off of SQL profile/password assigned, enter the user and password I assigned on SQL, go through the setup and test successfully. Then I try to connect using that datasource with my VB application and it says connection failure. When I go back to the datasource, it has changed back to NT verification and removes the user/password I entered for SQL verification. Maybe there is an service pack from MS on this?

any help is appreciated. At the very least, I can just hard code into my VB app, but that is my last resort. Thanks!

View 1 Replies View Related

ODBC Connection

Jun 10, 1999

Hi everyone

I installed the MS SQL server 7.0 on a Windows NT 4.0 SP 4 server. The network runs with TCP/IP.
I want to connect the SQL server by a ODBC-connection. Only a connection on the server (local) was successful.

The odbcping-utility reports following:
COULD NOT CONNECT TO SQL SERVER

SQLState: 08001 Native Error: 6
Info. Message: [Microsoft][ODBC SQL Server Driver][DBNMPNTW]Selected SQL server not found.

SQLState: 01000 Native Error: 53
Info. Message: [Microsoft][ODBC SQL Server Driver][DBNMPNTW]ConnectionOpen (CreateFile()).

Do I forget to install a SQL server component? Or a network service?

Thank you for your help.

Greetings
Steven

View 3 Replies View Related

ODBC Connection

Nov 8, 1999

I am currently running a application and a database server they are connected via ethernet. Only the application is connected to our network. Is there a way to connect MS Access to the database server without connecting the database server to the network? I've tried several different approaches and it still dosent work. Any help would be greatly appreciated.
Dale

View 1 Replies View Related

T-SQL ODBC Connection

Sep 15, 2004

Would someone provide a code snip example of a T-SQL script using an ODCB connection against a non-SQL2K database. I can hit the outside database using DTS (so I know it is possible) but I'm having trouble with the parameters using a script.

Thanks,
Fred.

View 2 Replies View Related

ODBC Connection

Aug 29, 2007

Hello - I'm trying to creat an ODBC connection and the db I created is not showing up in the dropdown for 'Change the default database to:' option. I'm logged into SQL using Windows Authentication, create the db, restored it w/ a backup and then added a user w/ no problems. Any ideas?

View 1 Replies View Related

ODBC Connection

Mar 16, 2007

I am trying to connect to SQL Server using a 3rd party report generating software (dbextra). Everything is located on my local box. I am trying to establish connection through ODBC. Is this installed during setup or is this a function I have to manually set up and configure?

View 2 Replies View Related

ODBC Connection

Aug 27, 2006

I have front-end visual basic program that use an ODBC connection to connect with SQL server, and my questions is there any automated procedure to configure this ODBC connection instead of configure it manually specially of the user profiles was changed I have to configure it again.

Please advise

View 4 Replies View Related

Odbc Connection

Sep 17, 2007

We have three users that access a particular sqlserver database via microsoft access, two of the users have no problem, the third user used to be able to use the access database but is now getting a sql server error 18452 followed by an error message 'login failed for user '(null)' reason: not associated with a trusted sql server connection. When reviewing the odbc setup that the user that is having problems has, we find two sqlserver entries when it asks 'which sqlserver do you want'. How do i go about finding out where that entry comes from so i can look into removing one of them. None of the other users have two sqlserver entries. The othere users have no problem accessing this sqlserver database via ms access, I'm trying to find out why all of a sudden this one user is having problems

View 4 Replies View Related

Failed OLEDB Connection: Cannot Aquire Connection From Connection Manager

Feb 6, 2008

I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error.
Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.

Thanks,

John T

View 3 Replies View Related

Server Error While Trying To Open Connection

Feb 12, 2007

Hi,
I've created an "ASP.NET Web Application" project in Visual Studio and I want to simply open a connection to a database in SQL Server. All I have done is adding these 3 lines below without modifying any other generated codes by Visual Studio.(I've done this within code behind in Page_Load() not by <script> tag within HTML code)
public class WebForm1 : System.Web.UI.Page {   private void Page_Load(object sender, System.EventArgs e)  {   // Put user code to initialize the page here   SqlConnection c = new SqlConnection();   c.ConnectionString = "workstation id=BABAK;integrated security=SSPI;initial catalog=db1;persist security info=False";   c.Open();  }  ...   }
But I get this error :
Server Error in '/projects/fortest/tDB2' Application.--------------------------------------------------------------------------------
Login failed for user 'BABAKASPNET'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'BABAKASPNET'.
Source Error:
Line 24:    SqlConnection c = new SqlConnection();Line 25:    c.ConnectionString = "workstation id=BABAK;integrated security=SSPI;initial catalog=db1;persist security info=False";Line 26:    c.Open();Line 27:   }Line 28:  Source File: c:inetpubwwwrootprojectsfortest db2webform1.aspx.cs    Line: 26
What's wrong ?

View 2 Replies View Related

Error: 40 - Could Not Open A Connection To SQL Server

Jul 11, 2007

I posted this on the Dotnetnuke forums but no answer for it, so since it is a SQL error I guess maybe someone here might know. 
I installed the core forum that comes with the installation, the page runs great until I add the forum module.
I get this error:





A critical error has occurred.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
The portal is in godaddy if this can help.
Thanks,
Erick

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved