Read Data From Text File And Insert To Sql Table

Mar 28, 2008

hi my friends
i want read data from text file,and write to my table in sql,
please help me

M.O.H.I.N

View 6 Replies


ADVERTISEMENT

Read Data From A Csv File And Insert It In A Sql Server Databse Table

May 25, 2007

Hai Everbody,
           for me in my project i want to read data from a csv file and insert it in a sql server databse table.The csv file may contain n number of columns,but i want only certain columns from that, and insert it in the database table.How to achieve this. Plz help me it is urgent. Thanks in advance.
        Thanks and regards
               Biju.S.G

View 1 Replies View Related

Integration Services :: Dataflow Task Read CSV File And Insert Data To Table

Apr 29, 2015

I've a dataflow task on For Each Loop container at control flow of SSIS package. This For Each Loop container reads the CSV files from the specified location one by one, and populates a variable with current file name. Note, the tables where I would like to push the data from each CSV file are also having the same names as CSV file names.On the dataflow task, I've Flat File component as a source, this component uses the above variable to read the data of a particular file.

Now, here my question comes, how can I move the data to destination, SQL table, using the same variable name?I've tried to setup the OLE DB destination component dynamically but it executes well only for first time. It does not change the mappings as per the columns of the second CSV file. There're around 50 CSV files, each has different set off columns in it. These files needs to be migrated to SQL tables using the optimum way.

Which is the best way to setup the Dataflow task for this requirement?Also, I cannot use Bulk insert task here as we would like to keep a log of corrupted rows.

View 10 Replies View Related

Insert Data From A Text File Into The Table

Apr 15, 2006

Hi. my websever mysql manager allows to Insert data from a text file into the table.
currently i have a table with the following fields.

email name country

so i wanto insers data from a text file into this table.
so my question is : how the text file format should be prepared.

i.e. the first record would be > xxxx@yahoo.com john us

View 2 Replies View Related

BULK INSERT From A Text (.csv) File - Read Only Specific Columns.

Apr 23, 2008

I am using Microsoft SQL 2005, I need to do a BULK INSERT from a .csv I just downloaded from paypal. I can't edit some of the columns that are given in the report. I am trying to load specific columns from the file.

bulk insert Orders
FROM 'C:Users*******DesktopDownloadURL123.csv'
WITH
(
FIELDTERMINATOR = ',',
FIRSTROW = 2,

ROWTERMINATOR = ''
)

So where would I state what column names (from row #1 on the .csv file) would be used into what specific column in the table.



I saw this on one of the sites which seemed to guide me towards the answer, but I failed.. here you go, it might help you:

FORMATFILE [ = 'format_file_path' ]

Specifies the full path of a format file. A format file describes the data file that contains stored responses created using the bcp utility on the same table or view. The format file should be used in cases in which:

The data file contains greater or fewer columns than the table or view.


The columns are in a different order.


The column delimiters vary.


There are other changes in the data format. Format files are usually created by using the bcp utility and modified with a text editor as needed. For more information, see bcp Utility.

View 12 Replies View Related

Which Is The Best Way To Read From A Txt File And Insert Data Into Sql Server?

Mar 21, 2008

Hi, I was wondering which is the best way to read data from a txt file and insert each row into sql.
OLE DB Command could be? It will be necesary to work with variables?
My txt file will have a defined width (if it is necessary to know). I will have many rows with many columns. I have to map eah column from the txt file to it's corresponding column in sql server and insert data into it for each row.
Thanks for your help!

View 7 Replies View Related

Read Text File From SQL Server, Read Its Content, And Load It In RichTextBox (Related Component: Context.Response.BinaryWrite(), And StreamReader)

Nov 26, 2007

OBJECTIVE: I would like to read a text file from SQL Server 2000, read the text file content, and load its conntents in a RichTextBoxTHINGS I'VE DONE AND HAVE WORKING:1) I've successfully load a text file (ex: textFile.txt) in sql server database table column (with datatype Image) 2) I've also able to load the file using a Handler as below: using System;using System.Web;using System.Data.SqlClient;public class HandlerImage : IHttpHandler {string connectionString;public void ProcessRequest (HttpContext context) {connectionString = System.Configuration.ConfigurationManager.ConnectionStrings["NWS_ScheduleSQL2000"].ConnectionString;int ImageID = Convert.ToInt32(context.Request.QueryString["id"]);SqlConnection myConnection = new SqlConnection(connectionString);string Command = "SELECT [Image], Image_Type FROM Images WHERE Image_Id=@Image_Id";SqlCommand cmd = new SqlCommand(Command, myConnection);cmd.Parameters.Add("@Image_Id", System.Data.SqlDbType.Int).Value = ImageID;SqlDataReader dr;myConnection.Open(); cmd.Prepare(); dr = cmd.ExecuteReader();if (dr.Read()){ //WRITE IMAGE TO THE BROWSERcontext.Response.ContentType = dr["Image_Type"].ToString();context.Response.BinaryWrite((byte[])dr["Image"]);}myConnection.Close();}public bool IsReusable {get {return false;}}}'>'>
<a href='<%# "HandlerDocument.ashx?id=" + Eval("Doc_ID") %>'>File
</a>- Click on this link, I'll be able to download or view the file WHAT I WANT TO DO, BUT HAVE PROBLEM:- I would like to be able to read CONTENT of this file and load it in a string as belowStreamReader SR = new StreamReader()SR = File.Open("File.txt");String contentText = SR.Readline();txtBox.text = contentText;BUT THIS ONLY WORK FOR files in the server.I would like to be able to read FILE CONTENTS from SQL Server.PLEASE HELP. I really appreciate it.

View 1 Replies View Related

Export Data And Insert Into Text File

Apr 29, 2015

I have the data of ACTTAB, APTTAB and etc, how to i export this data from SQL and insert into a text file??? this is the first time i need to do. as for the 2nd thing is that after export the data from SQL into text file, i need to import this data into mongoDB. So basically how to export this following data (ACTTAB, APTTAB and etc) into text file?

View 7 Replies View Related

Foreach Loop Read Table Data And Write To File

Sep 21, 2007

Hi,

I want to do the following with a ssis package:

INPUT:
A table contains 2 columns with data i need. column A=Filename and column B=FileContent

PROCESS:
I need to loop through ea record in the table and retrieve columns A and B. Then for ea column i need to write the Content hold in column B into File hold in column A.

I so far found out, that i need a Execute SQL Task in Control Flow querying the table and get columns A and B into 2 variables, plus a 3rd var holding the object. Then the output goes into a Foreach Loop Container. From this point i don't know how to continue. I tried to put a Data Flow Task inside the Foreach Loop, but couldn't find out how i now get the 2 variables to the Data Flow Task and use them to for the file to be written and the content to be placed in the file.

Is there any example similiar to that so i could learn how to start on that?

Thanks
Danny

View 3 Replies View Related

Transact SQL :: How To Do Bulk Insert Into Temp Table From Text File

Sep 15, 2015

How do I do a bulk insert into a temp table from a text file. Text file looks like that:
 
ver_id TYPE
E57AB326-803C-436E-B491-398A255C919A 58
34D2A601-6BBA-46B1-84E1-3A805FDA3812 58
986E140C-62F1-48F1-B428-3571EBF00DA0 58

My statement looks like this:

CREATE TABLE [dbo].[tblTemp]([ver_id]  [nvarchar](255), [TYPE] [smallint]) 
GO
BULK INSERT [dbo].[tblTemp]
FROM 'C:v2.txt'
I keep receiving errors.

The error I receive is: Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (TYPE).

View 2 Replies View Related

Read Text File From Flat File Connection Manager SSIS

May 13, 2008

Hello Experts,
I am createing one task (user control) in SSIS. I have property grid in my GUI and 2 buttons (OK & Cancle).
PropertyGrid has Properties like SourceConnection, OutputConnection etc....right now I am able to populate Connections in list box next to Source and Output Property.

Now my question to you guys is depending on Source Connection it should read that text file associated with connection manager. After validation it should pick header (first line of text file bases on record type) and write it into new file when task is executed. I have following code for your reference. Please let me know I am going in right direction or not..
What should go here ?
->Under Class A

public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser, IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)

{

//Some code to read file and write it into new file

return DTSExecResult.Success;

}


public const string Property_Task = "CustomErrorControl";

public const string Property_SourceConnection = "SourceConnection";



public void LoadFromXML(XmlElement node, IDTSInfoEvents infoEvents)

{

if (node.Name != Property_Task)

{

throw new Exception(String.Format("Invalid task element '{0}' in LoadFromXML.", node.Name));

}

else

{

try

{



_sourceConnectionId = node.Attributes.GetNamedItem(Property_SourceConnection).Value;



}

catch (Exception ex)

{

infoEvents.FireError(0, "LoadFromXML", ex.Message, "", 0);

}

}

}

public void SaveToXML(XmlDocument doc, IDTSInfoEvents infoEvents)

{

try

{

// // Create Task Element

XmlElement taskElement = doc.CreateElement("", Property_Task, "");

doc.AppendChild(taskElement);

// // Save source FileConnection

XmlAttribute sourcefileAttribute = doc.CreateAttribute(Property_SourceConnection);

sourcefileAttribute.Value = _sourceConnectionId;

taskElement.Attributes.Append(sourcefileAttribute);

}

catch (Exception ex)

{

infoEvents.FireError(0, "SaveXML", ex.Message, "", 0);

}

}

In UI Class there is OK Click event.

private void btnOK_Click(object sender, EventArgs e)

{

try

{



_taskHost.Properties[CustomErrorControl.Property_SourceConnection].SetValue(_taskHost, propertyGrid1.Text);

btnOK.DialogResult = DialogResult.OK;

}

catch (Exception ex)

{

Console.WriteLine(ex);

}

#endregion

}

View 10 Replies View Related

How Do I Export Data From MS SQL Server Tables To Text File With 'insert' Statements

Jan 3, 2005

I am trying to take an entire MS SQL database and put it in an sql file. I have succesfully copied the tables into an sql file by highlighting the tables in enterprise manager and choosing 'generate sql script'.

That gives me the structure, but now I would like the data (in insert statements). I have looked in enterprise manager's export wizard and sql analyzer to no avail. There seem to be a lot of options for exporting data except this one! Please point me in the right direction.

At the end of the day, I would like to be able to put everything in a text file. Then, should I have problems, I can just copy my text into query analyzer and have a brand new database.

Thank you in advance.

View 4 Replies View Related

How To Insert Data From A File Into Table Having Two Columns-BULK INSERT

Oct 12, 2007



Hi,
i have a file which consists data as below,

3
123||
456||
789||

Iam reading file using bulk insert and iam inserting these phone numbers into table having one column as below.


BULK INSERT TABLE_NAME FROM 'FILE_PATH'
WITH (KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '||')

but i want to insert the data into table having two columns. if iam trying to insert the data into table having two columns its not inserting.

can anyone help me how to do this?

Thanks,
-Badri

View 5 Replies View Related

Transact SQL :: How To Bulk Insert Rows From Text File Into A Wide Table Which Has 1400 Columns

Feb 3, 2010

we can easily load a file into db tables. However, my main concern here is the number of columns in the file. A text file TEXT_1400.txt has 1400 columns. I am unable to load data to my db table using BCP or BULK INSERT commands, as maximum of 1024 columns are allowed per table in SQL Server 2008. 

We can still go ahead and create ‘Wide Table’ (a special table that holds up to 30,000 columns.  The maximum size of a wide table row is 8,019 bytes.). But when operating on wide table, BCP/BULK INSERT commands still fail. After few hours of scratching my head over BCP and BULK INSERT, I observed that while inserting BCP/BULK INSERT commands are unable to identify SPARSE columns and skip these columns, which disturbs column mapping and results in data conversion and trancation errors.
 
Is there any proper way to load this kind of files into the db table? 

View 6 Replies View Related

Read Text File By T-SQL

Feb 16, 2008

hi
how can i read a txt file by using T-SQL commands.
thanx

View 12 Replies View Related

Help Me! Read Text File In Sql

Jul 20, 2005

HELLO,please help me, how to read txt file and then insert it to sql table.i have file like this name.txe<...01230123192312390213200323423i4u23490342342342343....>I have 4 column and want to fractionise this text '012301231923123902132003'and put in to table.Best regardsRobert

View 3 Replies View Related

Read Text File

Apr 24, 2007

Hi,

I have the text file in my server.

Is it possible to read that text file and insert into the table.



pls advice



Regards

Antony

View 3 Replies View Related

Read Text File From SqlServer

Apr 23, 2007

Hi Frinds,
I have the text file in my server.
Is it possible to read the text file and insert into table via sql server stored procedure.

View 1 Replies View Related

Need To Read One Text File Into Three Tables

Jul 24, 2001

Can the header record be read into one table, the detail into another and the trailer into a third within one data transformation or would this have to be done with an active script task.

I then have to take this data and write it back out to one file with a header and detail lines.

Would vb be better for that part or can it be done easily with active script using the file system object. I could write the one header record and append the detail lines after.

Any help would be appreciated.

Thanks,
DTS newbie.

View 3 Replies View Related

Read Text File To Dataset

Mar 26, 2007

with the help of the following code am able to read the text file
now i need to insert values to the datatable in dataset
can anybody help me on this regard

string path = Server.MapPath("Account.txt");
StreamReader sr = File.OpenText(path);
string contents = sr.ReadToEnd();
Label1.Text = contents;
Label1.Text = contents.Replace(Environment.NewLine,"<br>");
sr.Close();


how shall i spilt them and add each value to two fields of the datatable

for example i have the fields in text file as
Username1:Password1
Username2:Password2
etc
i need to add the username seperatelt to a field called username in table
and password in password field of the datatable
an example with code would be better and helpful

thanks
shruhti

View 1 Replies View Related

Export Data From Table To Text File

Apr 22, 2002

I need to export data from a table to a text file, where the data in the table is deleted after written to the file. It is simple using DTS, but I want to do the export in "chunks" of data, committing the delete say after every 1000 rows.

My thought was a stored procedure would be easy enough to do this (done these in Oracle many times), but I don't know the quickest way to export a row of data from a stored procedure to a text file. Isn't using a command-line shell too slow? What are my options?

View 1 Replies View Related

Inserting Data From Text File To SQL ME Table

Nov 24, 2006

Hello,

I have an application taht requires the use of a table. The device that this application works on, has a local memory that does not allow me to insert the 800,000 records that I need. Therefore I have two approaches:

1. To insert less records into my local memory database e.g 40,000 but not row by row, bulk insert is better. How do I do the bulk insert?

2. This is the most prefferable way: To find a way to insert all 800,000 records into a table on the storage card which is 1GB. What do you suggest? Will using threads be helpfull? Any ideas?

I use C# from VS 2005, SQL ME, compact framework 2.0 and windows 4.2.

Thanks in advance,

John.

View 6 Replies View Related

Export Data From SQL Database Table To Text File

Jun 22, 2001

Hi,

I'm trying to export data from one of the table in my SQL 7.0 database into text file. Can someone tell me how can i do this using SQL Query instead of using BCP (command line) ?? Thank you in advance.

View 4 Replies View Related

How Can I Export/import Data On Table To/from Text File

Dec 24, 1998

I needs export data on table to text file so I can process this data
with another database engine ie. Informix.

Can anybody help me to solve this problem ?

View 2 Replies View Related

How To Write Selected Table Data To A Text File Daily?

Aug 24, 1999

I want to check a table to see what rows have been updated today, then write to a text file some data from the selected rows; then I want to automate this (DTS package? TSQL stored procedure job?) to run every night at midnight. Is the DTS Wizard the best way, that's what I did, but have not confirmed that it is writing a new text file every day, and does each new version write over the old one?

View 1 Replies View Related

Export Data From Sql Server 2005 Table To Text File

Feb 27, 2008



Hii
I want to transfer data from table to a text file.I m trying to use bcp utility and xp_cmdshell.but the export is not successful.
My query is:

EXEC master..xp_cmdshell'bcp "Select * from test..emp" queryout "c:dept.txt" -c -T -x'

and its output is:

NULL
Starting copy...
NULL
3 rows copied.
Network packet size (bytes): 4096
Clock Time (ms.) Total : 16 Average : (187.50 rows per sec.)
NULL


but there is no row copied into c:dept.txt

where is the problem??

Thanx
-Supriya

View 23 Replies View Related

Create Table From Text File, Extract Data, Create New Table From Extracted Data....

May 3, 2004

Hello all,

Please help....

I have a text file which needs to be created into a table (let's call it DataFile table). For now I'm just doing the manual DTS to import the txt into SQL server to create the table, which works. But here's my problem....

I need to extract data from DataFile table, here's my query:

select * from dbo.DataFile
where DF_SC_Case_Nbr not like '0000%';

Then I need to create a new table for the extracted data, let's call it ExtractedDataFile. But I don't know how to create a new table and insert the data I selected above into the new one.

Also, can the extraction and the creation of new table be done in just one stored procedure? or is there any other way of doing all this (including the importation of the text file)?

Any help would be highly appreciated.

Thanks in advance.

View 3 Replies View Related

Import Data From Text File Into A Temp Table In Stored Proc

Oct 1, 2001

Hey,
can one of you please show me how to import data from a text file into a temp table in a stored proc.
thanks
Zoey

View 1 Replies View Related

SQL Server 2012 :: Loading And Reformatting Text File Data Into Table

May 29, 2015

I am looking for a way to convert the following format into a sql table. The format it is Bib Tex.

Essentially a new row in the table would be for each entry, denoted by an @ logo and each column is denoted by an =, as you can see from the example data no one contains all the possible columns and some fields can be over two lines long.

To load this I was considering loading it into a table as each line being a row. Adding a row number, then a column counting the @ signs in order and essentially grouping each record, then for each group running through and looking for the column keywords 'author' , 'title' etc then splitting the data out into those constituent parts using substring and charindex.

@Book{hicks2001,
author = "von Hicks, III, Michael",
title = "Design of a Carbon Fiber Composite Grid Structure for the GLAST
Spacecraft Using a Novel Manufacturing Technique",
publisher = "Stanford Press",
year = 2001,

[Code] ....

View 9 Replies View Related

Load Data From Text File Into Some Table Implemented In Stored Procedure.

Nov 8, 2006

Hello, I want to load data from text file to MS SQL DB table.

In MySQL, it is the "LOAD DATA INFILE..." query statement.

What is sutable query if I want to migration from Mysql to MS SQL Server 2005 Express?

View 2 Replies View Related

Can Sql Server Read An Outside File And Insert The Contents Into The Database?

Aug 8, 2000

hello!

i'm an sql server beginer. i was wondering if some of you guys can help
me out. i need for the sql server to be able to read an outside file (just text) and be able to run a script that will insert it in the database. it's a dcc output file. we've tried running this script:

DROP TABLE tests
go
DECLARE @SQLSTR varchar(255)
SELECT @SQLSTR = 'ISQL -E -Q"dbcc checkdb(master)"'
CREATE TABLE tests (Results varchar(255) NOT NULL)
INSERT INTO tests EXEC('master..xp_cmdshell ''ISQL -E -Q"dbcc checkdb(master)"''')


and it's running good but the problem is the results of the dbcc here did not come from a file but directly after executing the dcc command. is there a way to do it?

thank's for the help!

View 1 Replies View Related

Integration Services :: Importing Text File Into Table - Random Data Order

Aug 3, 2015

I'm importing comma-delimited text files into a SQL table. The data imports in a seemingly random order. One time I import and the lines appear one way and the next time I import they import another way.

Is there a way to force the text files to import in the same order the data is found in the file?

View 10 Replies View Related

Bulk Insert Into Table With More Columns Than Data Within File

Jun 17, 2007

Hey all

I have a bulk insert situation that would be nice to be able to pull off. I have a flat file with 46 columns that are to go into a table. The table, I want to have a 47th column to be updated later on by means of a stored proc saying if the import into the system was sucessful or not. I have the rowterminator set as '"' thinking that would tell SQL to begin on the next row, leaving the importstatus column null but i still receive an error.

First of all, is this idea possible within this insert statement. Secondly, if so, what would be the syntax to tell the insert statement to skip that particular column. It is the last column listed in the table so it just needs to start on the next row after it inserts the last bit of data in the flatfile.

If this is not possible, is it possible to bulk insert into a temp table?

Thanks

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved