Read Only Database Restore Bringing Database In Single User Mode?

May 9, 2012

I'm taking a database(read-only) backup from one server and restoring it on other server. As soon as restore is done it is bringing database into single-user read-only mode.

why it is bringing the database into single user mode ?

View 1 Replies


ADVERTISEMENT

Database Stuck In Single User Mode

Apr 21, 2008

I have a database that got set into single user mode. Unsure the reason or who might opened it. I am trying to reset it, but I am having problems. I am trying the following from http://www.kodyaz.com/articles/alter-single-user-multi-user-mode.aspx to kill the connections. So I can then switch it back to multiple users.
DECLARE @DatabaseName nvarchar(50)DECLARE @SPId intSET @DatabaseName = N'Works'DECLARE my_cursor CURSOR FAST_FORWARD FOR SELECT SPId FROM MASTER..SysProcesses WHERE DBId = DB_ID(@DatabaseName) AND SPId <> @@SPIdOPEN my_cursor FETCH NEXT FROM my_cursor INTO @SPIdWHILE @@FETCH_STATUS = 0BEGINKILL @SPIdFETCH NEXT FROM my_cursor INTO @SPIdENDCLOSE my_cursor DEALLOCATE my_cursor
Which gives me the following error message when ran.
Msg 170, Level 15, State 1, Line 13
Line 13: Incorrect syntax near '@SPId'.

View 1 Replies View Related

Database Setting Itself To Single User Mode

Mar 19, 2001

Our company has several SQL Server 7 databases. One of them has now on two occassions, set itself to 'Single User' mode. I am completely baffled as to what can be causing it.

There's no jobs set up to do it.
There's no stored procedures programmed to do it.
The SQL Server Log shows that a DBCC CHECKDB ran at 18:00:37.73 and that users attempted to and couldn't log in from 18:01:01.95 onwards.
There is a maintenance plan set to run every two hours that does a backup, integrity checks, so it fired the CHECKDB.

Any ideas please?

Thanks.

View 2 Replies View Related

Recovering Database In Single User Mode

Jan 5, 2001

while recovering it prompts a message 'the system administrator must have exclusive use of database to run the restore operation'.
now,how to do it?
how to make database to use exclusively when it is connected to an web based aplication.
thanks.

View 1 Replies View Related

Database In Single User Mode After Backup

Feb 7, 2001

Hi!

I have a problem with databases that are left in single user mode after transaction log backup.
I have a database maintenance plan job that backs up the transaction log and checks data and index linkage every hour.
Sometimes the job fails and when I look in the report file it says that it has tred to put the database in single user mode and failed because the database is in use and then in the next step it says that it cannot perform the operation because there already is a user in the database.

Why is the database put in single user mode?
What can I do to avoid finding my databases in single user mode?


Below is a part of the report file:

[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 15089: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot change the 'single user' option of a database while another user is in the database.
[1] Database BV Produktion: Check Data and Index Linkage...

** Execution Time: 0 hrs, 0 mins, 1 secs **

[2] Database BV Projektering: Check Data and Index Linkage...
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 924: [Microsoft][ODBC SQL Server Driver][SQL Server]Database 'BV Projektering' is already open and can only have one user at a time.
[Microsoft][ODBC SQL Server Driver][SQL Server]Only the owner of object 'dms_user' can run DBCC CHECKTABLE on it.
[Microsoft][ODBC SQL Server Driver][SQL Server]Database 'BV Projektering' is already open and can only have one user at a time.
[Microsoft][ODBC SQL Server Driver][SQL Server]DBCC execution completed. If DBCC printed error messages, contact your system administrator.

The following errors were found:

[Microsoft][ODBC SQL Server Driver][SQL Server]Database 'BV Projektering' is already open and can only have one user at a time.
[Microsoft][ODBC SQL Server Driver][SQL Server]Only the owner of object 'dms_user' can run DBCC CHECKTABLE on it.
[Microsoft][ODBC SQL Server Driver][SQL Server]Database 'BV Projektering' is already open and can only have one user at a time.
[Microsoft][ODBC SQL Server Driver][SQL Server]DBCC execution completed. If DBCC printed error messages, contact your system administrator.
** Execution Time: 0 hrs, 0 mins, 9 secs **

View 1 Replies View Related

Backup Of SQL Database In Single User Mode ?

Oct 30, 2007

Hello ,

Is it possible to do the backup of SQL server instance in a Single user mode ?
What is the recommended practice ?

Thanks in advance,
atv

View 5 Replies View Related

DB Engine :: Database In Single User Mode

Oct 22, 2015

I put the database in emergency mode, then I executed Checkdb, it shows no errors. The database status is still EMERGENCY and when I try to bring it online, it says he database is in single-user mode, and a user is currently connected to it. There is one processes which is accessing the database, i try to kill it, but it is not going. I am not able to set database to multi user.

View 7 Replies View Related

What Are The Situations To Keep Database In Single User Mode

May 6, 2015

I know what single user mode does but my doubt is at what situations we will go for this? What operations to perform ? we will keep the database in single user mode.

View 7 Replies View Related

What Causes A SQL Server 7 Database To Swithc To Single-user Mode

Apr 3, 2002

We have a database that is somehow switching to single-user mode every few days. We suspect that the client application (Access 97) written by a non-developer may be doing something funny.

Has anybody encountered such a problem?
How is this possible?

Thanks in advance for any help or pointers.

View 3 Replies View Related

How To Access Database In Single User Mode All Time

Aug 23, 2004

Dear All,
I want my SQL database to be accessed always in a single user mode through my application. How can I do this ?

Thanks in advance.

Sushma

View 5 Replies View Related

Transact SQL :: Adding Database - Single User Mode Freeze

Oct 5, 2015

I would like to add database to single user mode to enable broker. So, i have tried this:

ALTER DATABASE myDb SET SINGLE_USER WITH ROLLBACK IMMEDIATE
ALTER DATABASE myDb SET ENABLE_BROKER
ALTER DATABASE myDb SET MULTI_USER

But the query works more than half an hour then i have stopped it. i guess it has infinite loop, I get also many of this messages:

Nonqualified transactions are being rolled back. Estimated rollback completion: 0%.

There is no other transaction also there is no other user connections. So, what happens?

View 5 Replies View Related

SQL Server 2008 :: Database In Single-user Mode / How To Change It Programmatically

Mar 10, 2015

Recently we had multiple production failures because one database was in single-user mode. I am trying to recreate this scenario to write a script that will kick out that connection that was holding database in single-user.In SSMS window 1 I run the following code:

use master
go
alter database test
set single_user
with rollback immediate

[code]....

Yes, it shows one record, but the database name is master, not test. And indeed, I run it from the context of master. Also tried sp_who, sp_who2, sys.dm_exec_requests - nothing works. For dm_exec_requests it shows nothing because it does not run at the current moment.Any other solutions to catch this SPID with a script?

View 5 Replies View Related

Concurrency Issue On A Single Database User For An Online Read/write Application

Aug 3, 2006

Hi to all DBAs,

I would like to ask if there will be a write and concurrency issue if i would create an online application with just one user connecting to the database, just like most open source php/mysql that can be downloaded

i.e
Setup 1. I will grant a single user that will connect to a database and will be set to a config.inc.php file and then create a table users (userid, username, password) and this table will be used for the application authentication and access control.

Setup 2. or is it much better to grant users that will connect to the database and have the table users for access control of the application?

to further illustrate my query:

Setup 1 would be:
###################Table: Users
user a@ipadd --> db1 --> userid mary --> myOnlineApp
user a@ipadd --> db1 --> userid john --> myOnlineApp
user a@ipadd --> db1 --> userid paul --> myOnlineApp


and Setup 2 would be:
#####################Table: Users
user mary@ipadd --> db1 --> userid mary --> myOnlineApp
user john@ipadd --> db1 --> userid john --> myOnlineApp
user paul@ipadd --> db1 --> userid paul --> myOnlineApp

will Setup 1 be enough if I will use SQL Server as database?

or Setup 2 is better user/database architecture?

This application will be online enrollment for a school with 16,000 students

very much appreciated for the feedbacks and suggestions

^_^x

View 3 Replies View Related

How Can I Get A Database Out Of Standby/Read-only Mode?

Jan 16, 2008

How can I get a SQL Server 2005 database out of Standby/Read-only mode? I just restored this DB sent from a customer and it is in Standby/Read-only mode. I need to add a user so that I can authenticate from my app for testing purpose.

Thx

View 9 Replies View Related

Database Shows In Read Only Mode ?

Apr 7, 2007

Database shows in read only mode when I did try to restore my database.But How to can I convert it to online mode?



pls help

View 1 Replies View Related

SQL 2012 :: Master Database To Single Mode

Jan 29, 2015

Is it possible to put master database to single mode, if yes then whats the procedure. The reason behind the scenario is to restore master database from backup for which its strictly recommended to put the database in single mode. But I m not able to do so.

View 5 Replies View Related

Restore Database By Read-only

Jan 10, 2008

Hello, everyone:

I have two questions about database restorsation.

1. From Enterprise Manager, I can choose Read-only model (able to install another transaction log). How to execute same model restore by T-SQL? This script is used by Loading model:

RESTORE DATABASE MyNwind
FROM MyNwind_1
WITH NORECOVERY,
MOVE 'MyNwind' TO 'c:Program FilesMicrosoft SQL ServerMSSQLDataNewNwind.mdf',
MOVE 'MyNwindLog1' TO 'c:Program FilesMicrosoft SQL ServerMSSQLDataNewNwind.ldf'
RESTORE LOG MyNwind
FROM MyNwindLog1
WITH NORECOVERY


2. If a database is in Read-only Warm Stand-by because restore trans log files, how to turn of read-only model?

Thanks

ZYT

View 2 Replies View Related

Single User Mode

Mar 21, 2001

I tried to run the SQL in single user mode by executing sqlservr.exe -m.
The execution starts in a DOS window but apparently stops at one point. The SQL Server will run in single user mode but when i tried to restore the master db, the restoration process stops and the SQL server stops. Is there any process I left out? I think the execution of single user mode is incomplete. Please help.

Actually, I found exactly the same problem was posted year ago, but there was no solution.
Any information would be greatly appreciated.

View 2 Replies View Related

BUG --- DB Goes Into Single User Mode

Jun 5, 2001

Where can I find out about SQL Bugs -- such as the one in subject.

Any help regarding subject would be awesome.

Thanks

View 3 Replies View Related

Single User Mode

Feb 27, 2001

At the moment some of the databases on my systems drop themseleves into single user mode over the weekend. Has any one expierienced this or does any one know how I could monitor it to find out how it is doing it.

View 1 Replies View Related

Single-User Mode

Aug 23, 1999

Hello,
I have an SMS 2.0 Site in which we ae using SQL Server 6.5. I am having major
problems setting server in Single-User Moder and running automated SQL Utilities because of multiple connections at one time. Does anyone know how to FORCE SQL into Single-User Mode. Any help would be greatly appriciated.
Thank You,
George Aviles
gaviles@na2.us.ml.com

View 1 Replies View Related

Single User Mode

Mar 1, 2005

I'm trying to restore the master database. I can't seem to start the SQL Server in single user mode.

Through the command prompt

1. net stop MSSQL$AIMS
2. C:Program FilesMS SQL ServerMSSQL$AIMSBinnsqlservr.exe -c -m

It runs saying that it's in single user mode etc etc.

When i open enterprise manager and try to restore the database, it comes up in a prompt saying i need to put it in single user mode

View 8 Replies View Related

Single User Mode

Jul 24, 2007

I have been trying with no success to start my SQL Server in single user mode and login.

Here's the scenario:

I've got a one node cluster with SQL Server 2000 installed. I changed the startup parameters of SQL Server to reflect the following:

-c
-f
-m

I have disabled SQL Server Agent so it doesn't start when I bring SQL Server online. But when I do bring SQL Server online, I'm not able to connect at all. I keep getting the "only one administrator can log on at one time".

There is no one else trying to log on and SQL Agent is disabled.

What is the scoop? Has anyone seen this? And if so, how did you address it? I'm trying to restore master and need to get this donesooner rather than later.

Thanks!

View 4 Replies View Related

SQL In Single User Mode

Sep 7, 2005

Hi I have heard abt starting the SQL Server in Single User Mode,


1) Can any one tell my why would I have to do that , Can some one please give me real time examples as to why he/she started the SQL Server in Single User Mode

2) I have currently got 20 users online,howe can I start the SQL in single user mode.


Thankyou.

View 4 Replies View Related

Single User Mode..

Jul 20, 2005

If I start the server in single user mode does it reset the sort order?

View 1 Replies View Related

Single User Mode / DAC

May 2, 2008

I know it's completely not advised, but I have to do this: I need to make some updates to a system table. In short, I have some databases that were secondary databases in a log shipping scenario. I needed to recover those, so now they're not in STANDBY. All I want to do is reset those back to STANDBY so I don't have to completely start from scratch. One of the databases is 500GB and I do not feel like having to wait for another full restore of that database.

I have DAC enabled on the server in question. Whenever I try to connect, it says DAC is NOT enabled. Wrong!!! When I run this query:
Code Snippetsp_configure 'remote admin connections', 1;GORECONFIGURE;GO The first statement runs fine. It says to RUN RECONFIGURE. I run reconfigure. I then get an error saying ad-hoc updates to system catalogs are not accepted. Huh?????? So I start the SQL Server in Single User Mode. I closed every single connection. Nothing else is trying to connect. When I try to connect to the instance via SSMS using ADMIN:<instance name>, I get an error saying I can't connect because only one adminstrator is allowed to connect while in single user mode. I do not get what the H-E-double-hockey-sticks is going on! I'm set up as a sysadmin on this box... I don't get it...

View 5 Replies View Related

Single User Mode

Jul 25, 2007

I have been trying with no success to start my SQL Server in single user mode and login.

Here's the scenario:



I've got a one node cluster with SQL Server 2000 installed. I changed the startup parameters of SQL Server to reflect the following:

-c
-f
-m



I have disabled SQL Server Agent so it doesn't start when I bring SQL Server online. But when I do bring SQL Server online, I'm not able to connect at all. I keep getting the "only one administrator can log on at one time".



There is no one else trying to log on and SQL Agent is disabled.



What is the scoop? Has anyone seen this? And if so, how did you address it? I'm trying to restore master and need to get this done sooner rather than later.

Thanks!

View 5 Replies View Related

Sql 7 Database In DBO-user OnlyRead-OnlyofflineEmergency Mode

Sep 6, 2007



Hi there.

Senario:
SQL 7 Dekstop Edition 7.0.1094.
Database size is 2048MB, no T-log

During SQL Server startup the rebuild failded: See quote below taken fron the SQL errorlog:

2007-09-05 22:24:31.09 spid7 Opening file C:MSSQL7datadatabasename.mdf.
2007-09-05 22:24:31.14 spid6 Opening file C:MSSQL7datadatabase_log.LDF.
2007-09-05 22:24:31.18 spid7 Opening file C:MSSQL7datadatabasename_log.LDF.
2007-09-05 22:24:38.95 spid7 Recovery progress on database 'databasename' (6): 6 percent.
2007-09-05 22:24:40.42 spid7 Recovery progress on database 'databasename' (6): 13 percent.
2007-09-05 22:24:42.14 spid7 Recovery progress on database 'databasename' (6): 20 percent.
2007-09-05 22:24:43.87 spid7 Recovery progress on database 'databasename' (6): 26 percent.
2007-09-05 22:24:49.60 spid7 Recovery progress on database 'databasename' (6): 33 percent.
2007-09-05 22:24:57.14 spid7 Recovery progress on database 'databasename' (6): 40 percent.
2007-09-05 22:24:58.17 spid6 Using 'xpstar.dll' version '2000.28.09' to execute extended stored procedure 'sp_MSgetversion'.
2007-09-05 22:25:04.51 spid7 Recovery progress on database 'databasename' (6): 46 percent.
2007-09-05 22:25:07.50 spid7 22450 transactions rolled forward in database 'databasename' (6).
2007-09-05 22:25:07.50 spid7 Recovery progress on database 'databasename' (6): 53 percent.
2007-09-05 22:25:07.50 spid7 Recovery progress on database 'databasename' (6): 93 percent.
2007-09-05 22:25:07.53 spid7 The file 'databasename' has been expanded beyond its maximum size to prevent recovery from failing. Contact the system administrator for further assistance.
2007-09-05 22:25:07.53 kernel CREATE/ALTER DATABASE failed because the resulting cumulative database size would exceed your licensed limit of 2048 MB per database.
2007-09-05 22:25:07.67 spid7 Could not allocate space for object 'tablename' in database 'databasename' because the 'DEFAULT' filegroup is full.
2007-09-05 22:25:07.67 spid7 Error: 1105, Severity: 17, State: 2
2007-09-05 22:25:07.67 spid7 Log space info for tran 0:6805160 in database 6
Before: LogRecs= 1676163 Used= 0, Rsvd= 0, SysUsed= 0
After: LogRecs= 1676222 Used= 13596, Rsvd= 0, SysUsed= 0
Short= 0, ShortComp= 13596, TotalUsed= 13596, Short%=100.0
2007-09-05 22:25:07.67 spid7 Error: 3314, Severity: 21, State: 3
2007-09-05 22:25:07.67 spid7 Error while undoing logged operation in database 'databasename'. Error at log record ID (130:53535:272)..
2007-09-05 22:25:10.71 spid7 Your transaction (process ID #7) was deadlocked with another process and has been chosen as the deadlock victim. Rerun your transaction.
2007-09-05 22:25:10.71 spid7 Error: 3413, Severity: 21, State: 1
2007-09-05 22:25:10.71 spid7 Database ID 6. Could not mark database as suspect. Getnext NC scan on sysdatabases.dbid failed..
2007-09-05 22:25:10.71 spid7 Process 7 unlocking unowned resource: KEY: 1:30:2 (6f02b959c1ec)
2007-09-05 22:25:10.71 spid7 Error: 1203, Severity: 20, State: 1
2007-09-05 22:25:10.71 spid7 Process ID 7 attempting to unlock unowned resource KEY: 1:30:2 (6f02b959c1ec)..
2007-09-05 22:25:10.71 server Using 'sqlimage.dll' version '4.0.5'


What puzzles me is those lines: Why expand the DB to avoid failure and then find out that it had failed because of the expansion?

2007-09-05 22:25:07.50 spid7 22450 transactions rolled forward in database 'databasename' (6).
2007-09-05 22:25:07.50 spid7 Recovery progress on database 'databasename' (6): 53 percent.
2007-09-05 22:25:07.50 spid7 Recovery progress on database 'databasename' (6): 93 percent.
2007-09-05 22:25:07.53 spid7 The file 'databasename' has been expanded beyond its maximum size to prevent recovery from failing. Contact the system administrator for further assistance.
2007-09-05 22:25:07.53 kernel CREATE/ALTER DATABASE failed because the resulting cumulative database size would exceed your licensed limit of 2048 MB per database.

In my opinion it is the SQL Server itself that provokes this error, because it is expanding the DB beyond licenced size and thus makes the DB inaccessible.
I'm aware of the SQL Server edition, but it would have bee nice if the SQL Server in this case had invoke some forced maintenance to the administrator instead of the selected solution.


I've tried almost anything but any changes to the DB is locked out.

I'm running out of ideas to get this DB back online. I assume that the DB is lost, due to the fact that it has reached the licensed limit for a DB size in desktop edition and even some DBCC command will failed.

But any good ideas will be received with hope, respect and thanks.


torpo

View 4 Replies View Related

Set Database Back To Multi User From Single User

Feb 27, 2008

I am using SharePoint Services 3.0 (SP1) with default configuration options, which installs the Microsoft##SSEE instance of SQL to my local C: drive.

While attempting to relocate the files to another drive, I set one of the databases (as recommended) to Single User by using the SQL Server Management Express tool.

I cannot now reset that database to Multi User, even by executing the query

exec sp_dboption 'database_name', 'single user', ''FALSE'

again by using the Management Express Tool.

Can someone please help, in plain english???? Thanks

View 5 Replies View Related

Restore In Single Usermode For Master Database (was Hi)

Apr 23, 2006

I am having problem restoring a data i backup in master database for an application upgrade. I have this error message that ' i can only restore in single usermode for master database that i should change to single user mode'

View 3 Replies View Related

DB Engine :: Create Read-only Database From Production And Restore On Different Server

Jun 4, 2015

We have a production 2012 R2 SQL server that is not part of a domain. I have a database called CSSDC. I need to backup this database and make the BAK file available to a user on a different SQL server. Security is a concern. In order for this user to restore the database, they will have to be in the fixed server role sysadmins. I know I am going to have to use the Move with replace for the filegroups for the restore. Once the database is restored it will have to be altered to read-only. I would also like to remove the existing security and only have this new user access the read-only database.

View 4 Replies View Related

Single User Mode Error - Help!

Jul 18, 2000

Ever since installing SQL service pack2 I've run into a very strange error.

Just about every day, 1 or more databases just switch themselves into Single-User Mode. Since these databases form the back-end of websites, this is obviously a serious problem. No-one can get in. I've checked out the MS knowledge base, and books online, but I can't find a thing about this behavior.

Has anybody else run into this? - Does anybody know where I could begin to look to trace this error down? Its been going on for more than a week and I'm still at square one.

Any help would be apppreciated.

------------------------
Windows NT 4 - SP6a
SQL 7 - Sp2
------------------------

fenderson

View 3 Replies View Related

Going Into Single User Mode For No Reason?

Feb 19, 2001

Dear All,
I have some user databases that go into single user mode
for no apparent reason. Is there any reason that SQL
Server 7 would set a database in single user mode
by itself? NB They are not being set single user by anyone
else here, they would not know how.

Many Thanks in Advance,
Andrew

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved