I have a table that has a DateTime column which uses a DataTime
datatype. How do I retrieve a range of records based on the month and
year using ms sql?
Eugene Anthony
*** Sent via Developersdex http://www.developersdex.com ***
So let's say I have a table Orders with columns: Order# and ReceiptDate. Order#'s may be duplicated (Could have same Order# with different ReceiptDate). I want to select Order#'s that go back 6 months from the last ReceiptDate for each Order#.
I can't just do something like:
SELECT *
FROM Orders
WHERE ReceiptDate >= add_months(date,-6)
because there could be Order#'s whose last ReceiptDate was earlier than 6 months ago. I want to capture all of the instances of each Order# going back 6 months from each last ReceiptDate relative to each Order#.
Hi,
I have soma ado.net code that inserts 7 parameters in a database ( a date, 6 integers).
I also use a self incrementing ID but the date is set as primary key because for each series of 6 numbers of a certain date there may only be 1 entry. Moreover only 1 entry of 6 integers is possible for 2 days of the week, (tue and fr).
I manage to insert a row of data in the database, where the date is set as smalldatetime and displays as follows: 1/05/2007 0:00:00 in the table.
I want to retrieve the series of numbers for a certain date that has been entered (without taking in account the hours and seconds).
A where clause seems to be needed but I don’t know the syntax or don’t find the right function
I use the following code to insert the row :
command.Parameters.Add(new SqlParameter("@Date", SqlDbType.DateTime, 40, "LDate"));
command.Parameters[6].Value = DateTime.Today.ToString();
command.ExecuteNonQuery();
and the following code to get the row back (to put in arraylist):
“SELECT C1, C2, C3, C4, C5, C6 FROM Series WHERE (LDate = Today())?
WHERE LDate = '" + DateTime.Today.ToString() + "'"
Which is the correct syntax? Is there a better way to insert and select based on the date?
I don’t get any error messages and the code executes fine but I only get an empty datatable in my dataset (the table isn’t looped for rows I noticed while debugging).
Today’s date is in the database but isn’t found by my tsql code I think.
Any help would be greatly appreciated!
Grtz
Pascal
Hi! I have a table Tbl1 has to columns:
A B
_________
Ibm Me
Sony Me
Me Bob
Me Frank
I'd like to select all rows where B=ME and A=Me Thanks for the help
I need to list all the records in Table2 which don't have matching field values in Table1.
This the the exact opposite of what I need:
SELECT DISTINCT
Field1,
Field2,
Field3,
Field4,
Field5
FROM
[Table1]
WHERE EXISTS(
SELECT DISTINCT
FieldA,
FieldB,
FieldC,
FieldD,
FieldE
FROM
[Table2]
)
The above seems to give me all records in Table1 in which the five fields match the five fields specified in Table2. What does not show up is the test record I put in Table2 which is not in Table1.
What I need, however, is the exact opposite.
I tried the above using NOT EXISTS but I get no records at all.
How do do this?
Here's my current SQL:
SELECT
RN_TEST_ID AS 'Test ID',
MAX(RN_EXECUTION_DATE) AS 'Last Execution Date',
MAX(RN_EXECUTION_TIME) AS 'Execution Time',
RN_DURATION AS 'Run Duration'
FROM RUN
[code]....
Here's a sample of data returned:
Test IDLast Execution DateExecution TimeRun Duration
86722/9/2015 0:0012:08:16180
86822/9/2015 0:0011:29:06181
86842/9/2015 0:0008:29:17119
105252/3/2015 0:0019:03:4089
105252/3/2015 0:0019:10:13305
106682/3/2015 0:0018:55:43103
106682/6/2015 0:0018:10:50123
114572/3/2015 0:0011:40:0726
What I need are two things:
1. The query should only return one record for each test id
2. The record returned should be the most recent. By most recent I mean the RN_EXECUTION_DATE and RN_EXECUTION_TIME of the returned row should be the most recent in time.
For example, in the sample data there are multiple rows with the same test id (for example 10668 and 10525. The 10525 is even more problematic since its execution date is the same for both rows returned - the execution times differ. Again, I want one record per test id and that record should be the most recent in time.
OK. I have this query, works on another box fine.
SELECT *
FROM bookkeep RIGHT OUTER JOIN
acraccts ON LEFT(bookkeep.accnum, 9) = acraccts.p_accnum
WHERE (bookkeep.busdate = '03/09/10') AND (bookkeep.tradetype = 'S')
on my sql box, if i run it, i get no data.
i figured out that if i change the where clause to (bookkeep.busdate='2003/09/10') it works
OR
if i simply put SET DATEFORMAT YMD on the first line before the SELECT * that it also works.
my problem is the basic query is hard coded and i really can't change it.
is there a global sql server setting that will make my sql 2000 sp3 box recognize '30/09/10' as 2003/09/10?
Hi,
I was wondering how you perform a select statement based on a specific date that will show all the records no matter which times belong to the specific date.
I have been having trouble with this one when using a single date, I think this is because of the time property as no records are displayed.
Thanks for any help.
Good Morning,I have a view that contains rate information, contractIDs, and effectivedates.I need to select the rate info based on contractID and date.I can provide a date and contractID, and I need to select the rate info forthat contract where the effective date is <= dateprovided.I need the 1 record that is closest to that date.I am thinking something with max() perhaps. Any ideas? The <= effectivedate will return several rows, I just need the one closest to the date Iprovide.Thanks for any advice,CK
View 2 Replies View RelatedUsing MS SQL 2005, how can I SELECT only the records whos date field is equal to the most recent date held in that field?
For example:
date item colour
---- ---- ------
12/15/2007 shirt red
12/13/2007 shirt black
12/15/2007 shirt blue
result(s) expected:
12/15/2007 shirt red
12/15/2007 shirt blue
I am having a table where i have the following columns where the date format is dd/mm/yyyy
Purchase Description From_Date To_Date------------------------------- --------------- ----------------Desktop 2/2/2007 2/3/2007Mouse 2/1/2007 28/1/2007Laptop 5/1/2008 15/3/2008Speaker 4/1/2008 21/1/2008
My requirement is i need to create a stored procedure which will look for the from_date and to_date values. If the difference is more than 30 days that record should get deleted automatically. How to write the stored procedure?
Please provide me with full stored procedure
Thanx in advance
I am having a table where i have the following columns where the date format is dd/mm/yyyy
Purchase DescriptionFrom_DateTo_Date
------------------------- --------
Desktop2/2/20072/3/2007
Mouse2/1/200728/1/2007
Laptop5/1/200815/3/2008
Speaker4/1/200821/1/2008
My requirement is i need to create a stored procedure which will look for the from_date and to_date values. If the difference is more than 30 days that record should get deleted automatically. How to write the stored procedure?
Please provide me with full stored procedure
Thanx in advance
C.R.P RAJAN
Ok, I have two parameters - @StartDate and @EndDate. We only care about the date part of these paramters. What I would like to do is create a table with one record for each date between these two values. For example:
@StartDate = '01/01/2008'
@EndDate = '01/8/2008'
Should yield a table with 9 records in it for every day between @StartDate and @EndDate like so:
01/01/2008 <datacol1> <datacol2>
01/02/2008 <datacol1> <datacol2>
01/03/2008 <datacol1> <datacol2>
01/04/2008 <datacol1> <datacol2>
01/05/2008 <datacol1> <datacol2>
01/06/2008 <datacol1> <datacol2>
01/07/2008 <datacol1> <datacol2>
01/08/2008 <datacol1> <datacol2>
I know I could just do a WHILE (@StartDate <= @EndDate) loop and insert records into a temp table but I'm looking to see if there are any new methods/techniques to achieve this with a more simple statement.
I have a requirement where i want to delete the records based on the Date column. I have table which contain the columns like machinename ,lasthardwarescandate
I want to delete the records based on the max(Lasthardwarescandate) i.e. latest one, column where the machine name is duplicate menace it repeats. So how would i remove the duplicate machine names based on the Lasthardwarescandate column(There are multiple entries for the Lasthardwarescandate so i want to fetch the latest date column).
Note: Duplication should be removed based on “Last Hardware Scan” date.
Only latest date should be considered from multiple records for the same system. "
I have a scenario to fetch records for each ID on 2 conditions. There are 2 types of Product type for each ID. PFE and PRI. I need only latest active PFE and at the same time all the latest PRI should be closed. (meaning, only PFE should be in Active status currently)
1.) Latest Product type PFE should be A (active) status for the particular ID
2.) At the same time ALL the latest PRI should be C(closed) status for the same ID
I have give example with 3 scenarios and desired output
1.) For ID 101, Latest PFE is active and all latest PRI is closed ----> Should come in result
2.) For ID 102, Latest PFE is Closed and all latest PRI is closed ---->Should NOT come in result
I would like to have records in my Absences table split up into multiple records in my query based on a start and end date.
A random record in my Absences table shows (as an example):
resource: 1
startdate: 2014-08-20 09:00:00.000
enddate: 2014-08-23 13:00:00.000
hours: 28 (= 8 + 8 + 8 + 4)
I would like to have 4 lines in my query:
resource date hours
1 2014-08-20 8
1 2014-08-21 8
1 2014-08-22 8
1 2014-08-23 4
Generating the 4 lines is not the issue; I call 3 functions to do that together with cross apply.One function to get all dates between the start and end date (dbo.AllDays returning a table with only a datevalue column); one function to have these dates evaluated against a work schedule (dbo.HRCapacityHours) and one function to get the absence records (dbo.HRAbsenceHours) What I can't get fixed is having the correct hours per line.
What I now get is:
resource date hours
...
1 2014-08-19 NULL
1 2014-08-20 28
1 2014-08-21 28
1 2014-08-22 28
1 2014-08-23 28
1 2014-08-24 NULL
...
... instead of the correct hours per date (8, 8, 8, 4).
A very simplified extract of my code is:
DECLARE @startdate DATETIME
DECLARE @enddate DATETIME
SET @startdate = '2014-01-01'
SET @enddate = '2014-08-31'
SELECTh.res_id AS Resource,
t.datevalue,
(SELECT ROUND([dbo].[HRCapacityHours] (h.res_id, t.datevalue, t.datevalue), 2)) AS Capacity,
(SELECT [dbo].[HRAbsenceHours] (9538, h.res_id, t.datevalue, t.datevalue + 1) AS AbsenceHours
FROMResources h (NOLOCK)
CROSS APPLY (SELECT * FROM [dbo].[AllDays] (@startdate, @enddate)) t
p.s.The 9538 value in the HRAbsenceHours function refers to the absences-workflowID.I can't get this solved.
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
I have a query that will generate records monthly based on the number of months that i calculate between two date feilds for a given requestid. How can i use the same query to generate records for weekly and bi weekly based on the receiveddate field that i use in the subtraction for calculating the number of months.
Also when inserting i have been adding a month for every record as i was generating monthly and now i would have to add week and 2 weeks to the receiveddate
SET NOCOUNT ON
GO
declare @num_of_times int
declare @count int
declare @frequency varchar(10)
declare @num_of_times1 int
[Code] ....
Okay, let's see if I can explain this one. I am summing multiple lines of data from a labor detail table, by status. Using this query
SELECT EM.Lastname, LD.WBS1, LD.WBS2, P.Longname, SUM(LD.Held) AS HELDLABOR, SUM(LD.TBWRittenOff) as TBWrittenOffLabor, SUM(LD.WrittenOff) AS WRITTENOFFLABOR
FROM PR P INNER JOIN
(SELECT WBS1, WBS2, SUM(CASE WHEN BillStatus = 'h' THEN Billext ELSE 0 END) AS Held, SUM(CASE WHEN BillStatus = 'w' THEN Billext ELSE 0 END) AS TBWrittenOff,
SUM(CASE WHEN BillStatus = 'x' THEN Billext ELSE 0 END) AS WrittenOff
FROM LD
WHERE BillSTatus IN ('x','h', 'w')
GROUP BY WBS1, WBS2) LD ON p.WBS1 = ld.wbs1 AND P.WBS2 = LD.WBS2 INNER JOIN
EM ON p.ProjMgr = EM.Employee
WHERE p.Status IN ('a', 'i') AND P.ChargeType = 'r'
GROUP BY EM.Lastname, LD.WBS1, LD.WBS2, P.Longname
ORDER BY EM.Lastname, LD.WBS1
I get these results...
LastnameWBS1WBS2LongnameHELDLABORTBWrittenOffLaborWRITTENOFFLABOR
Boulet0001039.000100S.r. 41 & Del Prado Shopping Center/miscellaneous civil engineering18408.6309923.47
Boulet0001039.000102S.r. 41 & Del Prado Shopping Center/rezoning process008790
Boulet0001039.000106S. R. 41 & Del Prado Shopping center / const plan rev for environ planting2200.6800
Boulet0001039.000107S.r. 41 & Del Prado Shopping Center/cpd rezoning9335.4600
Okay, so now, of coarse, I want to change everything. I only want to return rows if there is a value > 0 in either Held Labor or TBWrittenOffLabor. Otherwise, no row return.
Here's what I tried, but it didn't work out because it still returns rows, it just zero's out the values for written off labor.
SELECT EM.Lastname, LD.WBS1, LD.WBS2, P.Longname, SUM(LD.Held) AS HELDLABOR, SUM(LD.TBWRittenOff) as TBWrittenOffLabor,
SUM(CASE WHEN LD.HELD > '0' THEN LD.WrittenOff ELSE '0' END) AS WRITTENOFFLABOR
FROM PR P INNER JOIN
(SELECT WBS1, WBS2, SUM(CASE WHEN BillStatus = 'h' THEN Billext ELSE 0 END) AS Held, SUM(CASE WHEN BillStatus = 'w' THEN Billext ELSE 0 END) AS TBWrittenOff,
SUM(CASE WHEN BillStatus = 'x' THEN Billext ELSE 0 END) AS WrittenOff
FROM LD
WHERE BillSTatus IN ('x','h', 'w')
GROUP BY WBS1, WBS2) LD ON p.WBS1 = ld.wbs1 AND P.WBS2 = LD.WBS2 INNER JOIN
EM ON p.ProjMgr = EM.Employee
WHERE p.Status IN ('a', 'i') AND P.ChargeType = 'r'
GROUP BY EM.Lastname, LD.WBS1, LD.WBS2, P.Longname
ORDER BY EM.Lastname, LD.WBS1
CREATE TABLE #Dateissue
(ID int,
Code nvarchar (20),
Datein datetime,
Declined datetime )
[Code] .....
I have a table here. I want find a way of getting the latest date, when the code is the same. If the Declined date is null. Then I still want the latest date. E.g. ID 3.
If the declined date is filled in. Then I want to get the row, when the Datein column value is greater then the declined date only.
I tried grouping it by max date, but i got an error message when trying this out. Against the code
WHERE MAX(Datein) > Declined
An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference. What do I need to do to get both my outputs working?
I'm looking for a way of taking a query which returns a set of date time fields (probable maximum of 20 rows) and looping through each value to see if it exists in a separate table.
E.g.
Query 1
Select ID, Person, ProposedEvent, DayField, TimeField
from MyOptions
where person = 'me'
Table
Select Person, ExistingEvent, DayField, TimeField
from MyTimetable
where person ='me'
Loop through Query 1 and if it finds ANY matching Dayfield AND Timefield in Query/Table 2, return the ProposedEvent (just as a message, the loop could stop there), if no match a message saying all is fine can proceed to process form blah blah.
I'm essentially wanting somebody to select a bunch of events in a form, query 1 then finds all the days and times those events happen and check that none of them exist in the MyTimetable table.
Hi All
I want to select a certainnumber of rows
select custno, amt, balance from customer where custno='customerno'
when showcust='r' then select rows where amt<balance
when showcust='c' then amt>balance etc
if showcust='' then show everything
Any insight will be greatly apprecaited.
Thanks
Hi there, im still learning SQL so thanks in advance.I have a table with columns of customer's information, [customerID], [customerFirst], [customerLast], , [program] ... other columns ... There will be entries where there can be duplicate customerFirst and customerLast names. I would like to just return a single entry of the duplicate names and all associated row information. IE: [customerID], [customerFirst], [customerLast], [ email], [program] 01 Bill Smith bill.smith@hotmail.com ymca 02 Bill Smith bill.smith@hotmail.com Sports 03 jon doe jon.doe@hotmail.com AAA 04 jon doe jon.doe@hotmail.com Ebay 05 Paul Sprite paul.sprite@hotmail.com Rec Desired Returned result: 01 Bill Smith bill.smith@hotmail.com ymca 03 jon doe jon.doe@hotmail.com AAA
05 Paul Sprite paul.sprite@hotmail.com Rec So in my code i have this:dAdapter = new SqlDataAdapter("SELECT * FROM [Poc_" + suffix + "] WHERE (SELECT DISTINCT [CustomerLastName], [CustomerFirstName], [CustomerEmail] FROM [Poc_" + suffix + "])", cnStr); dAdapter.Fill(pocDS, "Data Set"); However this is throwing up an error when i build the app: An expression of non-boolean type specified in a context where a condition is expected, near ')'.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException:
An expression of non-boolean type specified in a context where a
condition is expected, near ')'.
Source Error:
Line 52: //dAdapter = new SqlDataAdapter("SELECT DISTINCT * FROM [Poc_" + suffix + "] ORDER BY [CustomerLastName]", cnStr); Line 53: dAdapter = new SqlDataAdapter("SELECT * FROM [Poc_" + suffix + "] WHERE (SELECT DISTINCT [CustomerLastName], [CustomerFirstName], [CustomerEmail] FROM [Poc_" + suffix + "])", cnStr); Line 54: dAdapter.Fill(pocDS, "Data Set");Line 55: Line 56: //Dataset for name comparison 1: Can someone explain to me why this error is happening?2: Can soemone confirm that my intentions are correct with my code?3: If I'm completely off, can someone steer me in the right direction?Thanks alot!-Terry
I have inherited a query which currently returns multiple instances of each work order because of the joined tables. The code is here and I've detailed the criteria needed below but need the best way to accomplish this:
Select h.worknumber, h.itemcode, h.descr, h.task_descr, h.qty, h.itemised,
h.serialnum, h.manufacturer, h.model_id, h.depot, h.date_in, h.date_approved,
h.est_complete_date, h.actual_complete_date, h.meterstart, h.meterstop,
h.custnum, h.name cust_name, h.addr1, h.addr2, h.town, h.county, h.postcode,
h.country_id, h.contact, h.sitename, h.siteaddr1, h.siteaddr2, h.sitetown,
[Code] ....
Each work order should only be returned once, and with the following additional criteria:
1. i.meter - this should return only the lowest number from that file.
2. sm.next_calendar_date - this should return only the most recent date out of those selected for the certificates on this piece of equipment
3. wh.meterstop as [Last Service Hours],
wh.date_created as [Last Service] - this should return the number from wh.meterstop at the most recent wh.date_created for that piece of equipment.
This is a simple one, and I know that it has to be fairly common, but I just can't figure out an elegant way to do it. I have a table with the following fields:
OrderID (FK, not unique)
InstallationDate (Datetime)
CreateDtTm (Datetime)
There is no PK or Unique ID on this table, though an combo of OrderID and CreateDtTm would ostensibly be a unique identifier.
For each OrderID, I need to pull the InstallationDate that was created most recently (based on CreateDtTm). Here's what I've got so far, and it works, but man is it ugly:
SELECT a.OrderID, InstallationDate
FROM ScheduleDateLog a
INNER JOIN
(SELECT OrderID, max(convert(varchar(10),CreateDtTm,102)+'||' +convert(varchar(10), InstallationDate,102)) as TopRecord
FROM ScheduleDateLog GROUP BY OrderID) as b
ON convert(varchar(10),CreateDtTm,102)+'||' +convert(varchar(10), InstallationDate,102)=b.TopRecord
AND a.OrderID = b.OrderID
Table1 contains fields Groupid, UserName,Category, Dimension
Table2 contains fields Group, Name,Category, Dimension (Group and Name are not in Table1)
So basically I need to read the records in Table1 using Groupid and each time there is a Groupid then select records from Table2 where Table2.Category in (Select Catergory from Table1)
and Table2.Dimension in (Select Dimension from Table1)
In Table1 There might be 10 Groupid records all of which are different.
Hi,
i have a table like below
table:-
id col2 col3 col4 col5 col6
1 2 3 4 5 6
2 5 8 4 7 6
3 4 8 2 6 9
4 2 5 8 6 3
5 6 9 5 5 9
i want to write a stored procedure where i pass column names a parameters and i want to get result based on that
For ex:-
if i pass the parameters as
col3 and col5 where id =1 then i should the result as
id col3 col4 col5
1 3 4 5
and if i pass input as col2and col6 where id =3, the result should be
id col2 col3 col4 col5 col6
3 4 8 2 6 9
can anyone help on this??
I am trying to write a stored procedure that will select information from a SQL table based on a specific time.
For example I have a name field and a time field, I want to return just the names that were created between a specific time frame. ex between 3pm and 4pm.
Any thoughts?
I have a report with a date type parameter. Depending on the value return by this date type parameter the dataset will return either the credit, deposit or process date. How do I go about coding it so that it will dynamically select the right column in my query for my dataset?
Sincerely appreciate all the help I can get.
Thanks in advance.
I have a database which has a field called fldTimes. basically this field records the number of hits a file gets. How can I choose the most 5 popular files with the greatest hits. Thanks
View 2 Replies View RelatedIs it possible to use a SELECT to retrieve a Next 50 set of records?
Initial Query
Select top 50 email from table
What would the Query look like to retrieve the Next 50 records?
Thanks in advance.
This might be a simple question. I have a LIKE statement that is working fine, however I am not sure if something else is possible.
I can pull all records on a query for a person's name with a parameter value of "MARTIN". It will also pull records for "LYNN MARTIN". However, what if I would like to have that search also pull "LYNN M MARTIN"? Currently "LYNN MARTIN" is not finding "LYNN M MARTIN".
When the end user wants to search on LYNN MARTIN and that is what they input, I want SQL to find all records that match LYNN MARTIN and also find records that HAVE LYNN % MARTIN.
I hope this make sense? I guess I need to build my select statement using a WHERE LIKE statement, but I am not sure of the syntax.
I have to select rows from a table
if the first 2 characters of a 12 char column are
'GB'
Select BFKEYC from table where
I have a hokey way of doing it but it looks embarrassing:
BFKEYC GT 'GA9999999999'
AND BFKEYC LT 'GC'