Ssrs - Auto Time And Auto Updates In Report
My report in SSRS does update only when i run that
query in MS access. I migrate the 97 database to 2003
ms access database. I imported that report in ssrs
using import tool in ssrs. i have set up shared data
sources using odbc connection to ms access database.
auto refresh works only when i manually run query in
ms access.
Here's my query....it has several table.
SELECT Call_Completed_by_Engineer_Daily.FullName,
Call_Completed_by_Engineer_Daily.[Remaining Calls],
Call_Completed_by_Engineer_Daily.[Fairfax Calls],
Call_Completed_by_Engineer_Daily.[SystemS Calls],
Call_Completed_by_Engineer_Daily.[AACPS Calls],
Call_Completed_by_Engineer_Daily.[NSN Calls],
Call_Completed_by_Engineer_Daily.[MVA Calls],
Call_Completed_by_Engineer_Daily.[Other Calls],
Call_Completed_by_Engineer_Daily.[Total Calls],
Call_Completed_by_Engineer_Daily.[All Tech],
Call_Completed_by_Engineer_Daily.Department
FROM Call_Completed_by_Engineer_Daily
WHERE (((Call_Completed_by_Engineer_Daily.FullName)
Not Like 'Jim Rowland*' And
(Call_Completed_by_Engineer_Daily.FullName) Not Like
'Bill Bockmiller*' And
(Call_Completed_by_Engineer_Daily.FullName) Not Like
'Hong Nguyen*' And
(Call_Completed_by_Engineer_Daily.FullName) Not Like
'Hossein Talaei*' And
(Call_Completed_by_Engineer_Daily.FullName) Not Like
'James Hawkins*' And
(Call_Completed_by_Engineer_Daily.FullName) Not Like
'Joe Cooley*' And
(Call_Completed_by_Engineer_Daily.FullName) Not Like
'Peter Threatt*'));
This is a final query that i am getting report from.
They are other queries that grab the information from
table. For example, FullName query - Remaining Calls -
Fairfax Calls......
FullName Remaining Calls Fairfax Calls SystemS Calls
AACPS Calls NSN Calls MVA Calls Other Calls Total
Calls All Tech Department
Jay Brittain 10 4 4 JB DC
Jeremy Ditto 2 2 1 3 JD DC
Jing Kenny Hu 8 1 1 1 3 JKH DC
Phone Soe 11 1 2 3 PS DC
This is datasheet view of that query.
I imported access report to sql reporting service. i
can see it that report in web server too. However, i
have to hit refresh every time. Can you tell me where
to set up time?
i want autorefresh time with all auto updates information.
can anybody tell me plz?
View Complete Forum Thread with Replies
Related Forum Messages:
Help With Auto Printing A Report From A Web Application - SSRS Report Manager Print Control
Hi all, I was looking at a previous post in this forum - Help with auto printing report... I did find the code that it points to - Help with auto printing report... I did find the code that it points to - http://www.csharphelp.com/archives3/archive545.html I can get this to work fine as a console application and a Windows Service but not from a Web Application. It dies when I get to the point of actually printing it. I am thinking that this has something to do with the fact that Web applications have limited permissions. However you can print from the Reporting Services report manager page just by pressing the print button and it is a web application. I also know that it uses a print control, AKA plug-in. Do I need to write my own print control to get this to work with my web application or can I just re-use the one that is already being used by SQL Server Reporting Services Report Manger? If I was to write my own print control how would I go about it? Thanks, John
View Replies !
Auto Updates For SQL Server?
Our IT guy insists that he must be present anytime the SQL Server automatic updates from Microsoft are installed on the server or the server will crash. What has he been tinkering with to cause this to happen or is he just giving us a line?
View Replies !
Auto Time Stamp In Sql. Express
Is there a property setting in SqlEX. That automatically inserts the date and time in to a field (timestamp) in the dB, when a record is created. If so can someone please show me how this is done. Thanks in advance
View Replies !
Auto Increment In Design Time
Hi Could anyone tell me how can I set auto increment to a field in MSSQL at design time? So that whenever I insert a new record from VB, it will insert that new record incrementing the field which is not a primary key automatically. Thank you very much for everyone who are constantly helping me...
View Replies !
Auto Run Report
Hello Anyone know if any of the following are possible: Change the icon for a report in the report manager. I want a report to have a folder icon, so it therefore looks like a folder. When a user opens a folder, have a report automatically run and display. Have a report automatically open when the user opens the report manager. Cheers
View Replies !
Auto Resize A Report Width?
Hi, I have a very big report with 60 columns and some columns are invisible. The problem is now if I have 30 columns that are invisible (hidden=TRUE), the report width still stays at 60 columns width, and the Horizontal scroll bar become very long and it just scroll to blanks. I would like to know how to resize the report after it is generated? Thanks. Jon
View Replies !
Hiding Sub Report - Auto Deployment
I just asked you about how to hide the sub report from showing it in the drop down list. I have done it with the report manager [Report properties--> general --> Hide in Listview]. I am using RSBuild tool to automatically deploy the reports.I don't know what modification I have to make in the RSBuild code to incorporate this new functionality[Hiding sub report]. Can you please let me know how to do it? I am using the following code, The description property is working correctly. But the Hide in List view property is not working. Property[] properties = new Property[2]; Property Prop1 = new Property(); Property Prop2 = new Property(); Prop1.Name = "HideInListView"; Prop1.Value = "True"; properties.SetValue(Prop1, 0); Prop2.Name = "Description";Prop2.Value = "Muni deployed sub report"; properties.SetValue(Prop2, 1); But I don't know the proprty name and value for Hide in List view. Can you please give me the suggestion?
View Replies !
Report Auto Formatting And Sending
Hi, Using SQL 2005 Reporting Services, with the click of one button in my custom report viewer, is there a way I can generate my report, format it into PDF and send it to an email address that is shown on the report itself. (Report run may generate 1 copy specific to each client...ie, I want one copy to email to each client, and not have to have the clients subscribe to the report). Any idea? Cheers Jason
View Replies !
Auto Reload Of Report On Parameter Selection??
this might be a stupid question. I have a parameter which has a default value set to it. when a second value is selexcted is it necessary to click the view report button. Could it be set to auto reload on dropdown selection. I am using reporting Services 2000 Thanks.
View Replies !
Turn Report Auto-scroll Feature Off When Toggling Drill-down
Is there a way to turn IE7's auto scroll off so that every time you drill down by clicking on one of the "+" toggle buttons the report doesn't recenter itself. We find this window jumping/scrolling highly annoying to watch. This problem does NOT occur in FFox, just Microsoft's browsers. We are displaying this report running on another server running Visual Studio 2005's ReportViewer control in an aspx (ASP.NET) page. We are using SSRS 2005, std edition. FFox 2.0.0.6, IE7. Will be glad to post more info if requested.
View Replies !
How To Not Auto Generate A Report, How To Use A Null Checkbox On A Param With Available Values, How To Add Back/forward Buttons?
Hey all, 1) I have a report with many parameters that I want users to be able to pick from. Allow them to pick 1, many or all to build their report dynamically. I'm all set on the TSQL side, but on the Reporting Services side I have to allow each parameter to be null with a default of NULL. In by doing this, the report will auto run, which I do not want to happen. The only resolution I've found thus far was by adding a parameter that does nothing, with a NULL default value. Yet It sticks out like a sore thumb on the report and I want to get rid of it. If I check in "Hidden" in the parameter options, my report errors out stating that the parameter requires a value. 2) Is it possible to have a parameter that has available values from a dataset have a NULL checkbox like those of parameters that do not have available values? 3) Is it possible to add back/forward buttons inside of a report instead of just at the report header by default? Thanks!
View Replies !
SSRS Report Time Vs SP Time
I have a very basic report, pretty much just spits out the results from a storage proceedure. When I just run the stored proceed it takes about 36 seconds to run, and returns 532K records. When i run the report it takes a little over three minutes. The SQL Reporting server is on a seperate box, but its database resides on the same system as the database in which i am reporting up against. Any thoughts on what I could do to improve speeds on the reporting side I would appreciate it. Running SQL 2005 SP2, the report just takes in a date for a parameter and spits out financial holdings for that particular day.
View Replies !
How To Know Number Of Users Hitting A SSRS Report Over A Time Period?
Hi all, I want to raise one question which might not relevant to current discussion. Prob:-- I have some SSRS reports. I want to know for a given time period 1. How many people hit the report. 2. Who are the users hit the report in that time interval. Is there any query to get that data? Or, should I go somewhere to see the data? NB:- There is not any table in the application which is storing the data
View Replies !
Exact Datetype Not There In Number Fromat In Format Cells At The Time Of Rendering Ssrs Report Into Excel
i have ssrs report with contains 3 fields like start date, end date, percentage value, for these fields i given date and percentage fromats in format tab of the textbox, i export this report into excel sheet, what is problem is , in the excel sheet i select the date or percentage column and select the format cells option and selected the number format,but here i did not seen any format like date or percenatge format what ever i given datatype in report and it shows general format only for all columns. here i need solution like when clicking the number format in format cells it shows defaultly appropriate dateformat like date or percentage format at the time of rendering into excel. i think it is bug in ssrs , any guy please help me
View Replies !
SQL XML - Using FOR XML AUTO
In SQL Server 2000, is it possible to create an xml document in memory within a stored procedure (say, with FOR XML AUTO)? The resulting xml from such a call is not a string, so you can't use it as the input parameter for sp_xml_preparedocument. Any ideas?
View Replies !
Using For Xml Auto
Does anyone know how to use for xml auto that will format an xml response to show the parent/child relationships? I currently have the parents and children in a temp table and can only get a formatting so that each one is returned at a parent. how can i select the results from the temp table so for xml auto will return the properly formatted xml file? this is also for the TreeVeiw control.
View Replies !
FOR XML AUTO SQL 2K Vs 2K5
The upgrade adviser for for 2k5 says something about derived tables being handled differently between 2k and 2K5 and it says to query the tables directly but this does not seem to make much sense because I thought FOR XML AUTO just created some generic XML for presentation purposes. These 2 stored procedures that it is complaining about do query the tables directly and they use the FOR XML AUTO to control the output.Does anyone know if I have to worry about this? I am tempted to let this slide and check out this part of the application after the migration happens tomorrow for QA to start testing.Yes I have been googling, checking my books and digging around in BOL. I am not seeing anything.DISREGARD: I found my derived table. It appears to change the output of the XML. Perfect.
View Replies !
For Xml Auto
I know that you cannot insert into a table the result of a select query where you have a for xml auto instruction, I run this query in the query analyzer tool and there is the output I need to save in somewhere in the database, The documentation of the beta 2 of SQL Server 2k say that it is impossible, so I want to know 2 things: first, How can I store somewhere the result of a select .. for xml auto and second if it is impossible for what is this feature installed in SQL Server 2k Thanks
View Replies !
Auto Increment
DIAGID is the field in database which is integer. i want to increment this when page is loaded.but it is not working.. plz find mistake ... thanks in advance SqlCommand sqlCmd = new SqlCommand("Select max(DIAGID) from tblDxactual", sqlCon); SqlDataReader sqlDr; sqlCon.Open(); sqlDr = sqlCmd.ExecuteReader(); if (sqlDr.Read()) { txtbxDiagID.Text = sqlDr[0].ToString()+ "1" ; } else txtbxDiagID.Text="1"; sqlCon.Close();
View Replies !
Auto Delete?
is there a way to auto delete all the record that is more than 1 month old compare to the date field in that table.
View Replies !
Auto Counting In SQL
Hi all, I would like to have my SQL statement result to return an additional "column", automatically adding an "auto-increasing" number with it. So if I for example select all Dates older than today's date, I would want something like this: 1 10/12/2006 2 10/18/2006 3 10/20/2006 4 10/22/2006 5 10/30/2006 Keep in mind that it's not my intention to fysically insert the "counting" column into the table, but rather do it "virtually". Is this possible? And if yes, how ? :) Thanks in advance Nick
View Replies !
Auto SQL Mail
Hi, I have to generate mails automatically based on databse (SQL SERVER) table,In that table we have expirydate as one column and based on expirydate I have to generate the mails automatically,Please guide me to solve this issue. where we have to run the stored procedure. Do we have to use jobscheduler? please guide me how to use it Thanks in avance regards, Raja.
View Replies !
Format Of For Xml Auto
I am using sql server 2000 and want to know how to get xml out of the database that looks like this using for xml auto <Clients> <Client ID="1"> <Employer="Company1" /> <Employer="Company2" /> <Contact type="phone"> <contact type="email" value="test@test.com"> <contact type="phone" value="555-5555"> </Client> <Client ID="2"> <Employer="Company3" /> <Employer="Company4" /> <Contact type="phone"> <contact type="email" value="test@test.com"> <contact type="phone" value="555-5555"> </Client></Clients> The problem I am having is that Contact is nested inside employer when I select Employer before Contact and the opposite happens when I select Contact first. They both join to the Client table so I would assume they both should nest directly under Client. How do I get different fields to nest directly under the same element like above?
View Replies !
MS SQL 05 Auto Increment
Hello, Firstly Hello to everyone I'm new the forum and fairly new to .net I'm working on web datbase application using visual studios 05 and MS SQL05 I've used 2003 (briefly) before but 2005 is very new to me. To my problem I download the GUI interface from microsoft so I can now setup a local database and do my own testing. I have created the table and fields with in it however on a particular table i have made a primary Key and left it as an INT but I would like to set it as auto increment ! I dont know how to select that option as i was used to mysql way of doing things or does this have to be done as a stored procedure ? Any assistance much appreciated.
View Replies !
Auto Email
Hi All, I want to write a console application to send email. There is a Date field in the SQL Server and I need to send email 2 weeks before that date.I have no idea how to write a console application and make it work.Does anybody have code for this? If so please post it. Thanks a lot, Kumar.
View Replies !
MS-SQL: Where's Auto Increment?
It's been a long time since I've had to check an index for the highest value, then add 1, to create a new unique key. These past few years, it seems this is usually done for you. But now that I'm working with MS-SQL, I don't see it. Is it there? It's doesn't seem to be inherent in the definition.
View Replies !
Auto Numbering
Hello,For analyses and reporting I would like to add a 'ranking' to atable/view.Example:Using the 'order by desc' clause in query I get a list of Customersordered by Turnover (descending). I would like to add that rankingnumbers (same as recordnumbers) in the query. I would like to have thefollowing result:Cust_nr Cust_Name Turnover_2004 Ranking002234 Bayer 139.000 1003456 Rentokill 123.456 2001231 Air France 105.000 3etc.When the 'ranking' is part of the query/table I can use this ranking inan other query.Important: This questions is not about making an (empty) table structurefor filling in by an application and generating a new unique number eachtime a record is added.I hope you can help me.Thanks,Hans*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View Replies !
Auto Number
Hi,I want to create a random unique auto generated number. dont wantto use GUIDs. Any other way to create it in isert statement itself,apart from storing a number in a table and increment while inserting.Help me!
View Replies !
Auto Documenter
I was wondering if sql server 2000 has an auto documenter utility thatcan dump information about a database into a word, excel, or textfile. I would not need anything to complicated just table, fields,types, sizes, and maybe indexes.Currently I am just exporting my tables into access, and then usingthe auto documenter in access to get at this information. This worksbut the field types do not match exactly, and when the tables getlarge this is no longer a valid solution.Thanks,Charlie
View Replies !
Auto E-mails
Hello, I have a SQL server though a hosting company and I am trying to send autoemails using xp_sendmail. The permissions were set and I used the following command to test it. EXEC master.dbo.xp_sendmail @recipients='tracey@yahoo.com',@subject='test',@me ssage='testing sql stored procedure' It gave me a message saying "Mail sent" but there none in my e-mail box. How do I set yp the SQL Mail server, right? Please help. I don't know what is happening. Thanks, Tracey
View Replies !
Auto Increment
I would like to avoid using a cursor. I am updating several rows in a table with sequential numbers starting at a number I pass into the Stored Procedure. Is there a way to do this with one update statement? Thanks, Ken Nicholson Sara Lee Corporation
View Replies !
Auto Number
can anyone give suggestions how to generating a number starting with certain numbers, example 33###, because when i insert new record into datatabase i want the number start 33111, or something and next record is 33112 thanks
View Replies !
Getting The Auto Value From Trigger
Hi all, My requirement is to get the autoincrement column once a new row is inserted, we need the autoincrement value to update other tables, at present I am using an insert trigger in which I am extracting the autoincrement column from the 'inserted' table, but how far this work perfectly when multiple users insert simultaneously. Can any of you suggest me the best way to extract the actual value inserted. Now the scenario is : sp which insert a row Begin tran insert ... select @returnKey = (select retkey from #temptab) drop #temptab Commit Tran Trigger on insert insert idcolumn into #temptab select autokey from inserted If user A & B inserts row exactly at same time, will this method return the exact auto value what A and B have inserted to them respectively. Thanks in Anticipation Raj
View Replies !
Auto Increment.... Key's... Etc..
I am very new to using SQL server 7. I've always used mysql in the past. I cant figure out howto create a autoincrementing key for my tables... is it possible to do in SQL7?? If so.. how.. i thought you just set the datatype to auto increment etc... sorry for any oversights... dave
View Replies !
Help! Log Is Auto Shrinking Itself
HiRunning SQL 7 sp3 on NT 4 I have a database that has the auto shrink option turned OFF. However, the log file seems to auto shrink after the user runs bulk insert. The log file is not setup to auto grow either.Any ideas. Thanks, Tariq
View Replies !
Auto-Increment
Hey, Here is what happened: Users for a long time have been able to post new topics in our forums. However, a short time ago, the some users began to experience problems. What I have narrowed it down to is that upon inserting into the table, sometimes id value for the topic is the same as an id that is already in the table, so it fails to insert the record (due to a constraint). However, the topic id column is an auto-increment column and should just assign the next number for the id value. Any ideas?
View Replies !
Auto Incrementing
Hi I'm using a insert into fuction kind of like below INSERT INTO table1( col1 col2 col3 col4 ) SELECT col2 col3 col4 FROM ............... I'd like to auto-increment col1 so it counts how many rows are being added any help is very appreciated
View Replies !
Auto Increment
Hi, I have one table: Appid | Cols 1 | xx 2 3 In this table Appid is the primary key. I want to change the Appid column as Auto increment column. How to change the appid to Auto increment with data in that column. Is it possible? Thanks in advance
View Replies !
|
TRACKER
