#1251 - Client Does Not Support Authentication Protocol Requested By Server; ...
I am trying to get phpmyadmin working with mysql but I get the below errors...
Why is this??
"phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in config.inc.php and make sure that they correspond to the information given by the administrator of the MySQL server."
and...
" #1251 - Client does not support authentication protocol requested by server; consider upgrading MySQL client "
changes in config.inc.php file:
$cfg['PmaAbsoluteUri'] = 'http://localhost/phpmyadmin/'
$cfg['Servers'][$i]['auth_type'] = 'config'
$cfg['Servers'][$i]['user'] = 'root'
$cfg['Servers'][$i]['password'] = 'pword'
Any ideas if I am missing something?
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
Remote Access Not Working: Error 1251 Client Does Not Support Authentication Protocol Requested By Server
I'm trying to set up my MySQL database for remote access. I've never been a DB admin so this is all mostly new to me. I am binding to my public IP address, and I have created a new user with the following grant commands run from the mysql command line on the server: mysql> grant all privileges on prs_data.* to 'username'@'%' identified by 'change'; Query OK, 0 rows affected (0.00 sec) mysql> grant all privileges on prs_data.* to 'username'@'localhost' identified by 'change'; Query OK, 0 rows affected (0.01 sec) When I try to connect remotely from another host, here's what happens:
ERROR 1251: Client Does Not Support Authentication Protocol Requested
I have a problem with a MySQL environment. - One server (Windows) - Two instances of mysql (4.0.27 & 5.x.x) - Each instance are running as a service with a different port number (tcp 3307/3306) - Both services are set up with their own parameter files, so they point to the correct binary and data directory When I try to log on through the console against the MySQL 5 database by starting c:program filesmysql5inmysql, then everything is working as it should. If I try to do the same against the Mysql 4 database, it returns an error that the client does not support the authentication protocol requested.
Client Does Not Support Authentication Protocol Requested By Server
i have this message when i try to use 'mysql_connect' command in php. error message : Warning: mysql_connect(): Client does not support authentication protocol requested by server; consider upgrading MySQL client in c:program filesapache groupapachehtdocs7mysql_test.php on line 2
Mysql_connect(): Client Does Not Support Authentication Protocol Requested By Server; Consider Upgrading MySQL Client
Basically I am setting up php,mysql and apache to run an application. While trying to connect I get the following error: Warning: mysql_connect(): Client does not support authentication protocol requested by server; consider upgrading MySQL client in c:sudhirapachehtdocssvgmap est4.php on line 14 Cannot connect to the database. Client does not support authentication protocol requested by server; consider upgrading MySQL client I have tried the following message posted earlier by many of you guys i.e "SET PASSWORD FOR peter@localhost = OLD_PASSWORD('something') flush privileges I am trying this from a long time and do not find a way to fix this problem I request you guys to help me in soughting this out and I appreciate your patience in reading my post.
Mysql_connect(): Client Does Not Support Authentication Protocol Requested By Server; Consider Upgrading MySQL Client
I am having an awkward problem with my MySQL installation. I have a number of scripts that access the database from a few different web hosting sites. I have no problem accessing the database from the scripts that I host locally. The scripts that are on an outside server accessing the database gives me a mysql_connect() error. Locally I use MySQL 5.0 and PHP 5.0. I am assuming that the 3rd party web host uses an older version of PHP and thinking that may be the problem. Is this the possible problem and if so is there a way to fix it without ruining the scripts that are currently working?
1251 Client Does Not Support Authentication Protocol ....
I just installed MySQL 4.1 on my computer! While i was working with a Dreamwaver I tried to connect to MySql but i coldn't! The following massage appeared: 1251 Client does not support authentication protocol requested by server; consider upgrading MySQL client.
Client Does Not Support Authentication Protocol
If I create a user, say 'dbadmin' with full access on hosts 'All' and 'localhost' I cannot connect using PHP. I get the error: mysql_connect(): Client does not support authentication protocol requested by server; consider upgrading MySQL client. If I make the connection with root on any of the local IP addresses the connection is fine and the database updates correctly. Any thoughts? I suspect a problem with the use of the socket, but phpinfo() correctly returns the mysql settings.
Support Authentication Protocol Upgrade
I have been using a script on my server for 2 years today I get this message Is it the script or the server? Warning: mysql_connect() [function.mysql-connect]: Client does not support authentication protocol requested by server; consider upgrading MySQL client in /home2/cruisew/public_html/cruisevacationcenter.net/test/inc/db_wrapper.php on line 11 AAAClient does not support authentication protocol requested by server; consider upgrading MySQL client
Client Does Not Support Authentication
The problem is that when i browse to http://reception/admin/index.php? and enter username and password I recieve the following message 1251 - Client does not support authentication protocol requested by server; consider upgrading MySQL client But i can log into mysql using the command prompt
Authentication Protocol
I am trying to run an application using MySQL as a DB, but i am receiving the following error message: "Client does not support authentication protocol requested by server; consider upgrading MySQL client" I am using MySQL Client Version 5.0.11 Could someone tell how can I fix this issue.
Authentication Protocol
You have no license for using PerlDesk! DBI connect('perldb:localhost','webuser',...) failed: Client does not support authentication protocol requested by server; consider upgrading MySQL client at lib/PerlDesk/App.pm line 408 Compilation failed in require at lib/PerlDesk/App/License.pm line 3. BEGIN failed--compilation aborted at lib/PerlDesk/App/License.pm line 3. Compilation failed in require at lib/PerlDesk/App/Installer.pm line 9. Compilation failed in require at C:/Program Files/Apache Group/Apache2/cgi-bin/install.cgi line 25.
Authentication Protocol
I am running winXP, mysql, vb 6.0/vbscript. when i connect through odbc it gave me the following error. Run-time error'-2147467259 (800004005) [MySQL][ODBC 3.51 Driver] Client does not support authentication protocol requested by server; consider upgrading MySQL Client When i connect this mysql with vb 6.0/vbscript in windows 98 it runs perfectly.
Authentication Protocol
I recently had a crash with MySQL-Max 4.0.5beta in the Windows 2000 Server inviroment. I uninstalled it completely and salvaged the DATA directories. So i decided to go ahead and upgrade the MySQL to Server 4.1.7. But now I get an error message from all my scripts that tell me the following. Warning: mysql_connect(): Client does not support authentication protocol requested by server; consider upgrading MySQL Can some one please assist me in fixing this matter. I am very limited in MySQL and have done hours of research trying to fix this matter.
Authentication Protocol
I am having trouble with my MySQL database, so when I run a script I receive the following error: 'Warning: mysql_pconnect() [function.mysql-pconnect]: Client does not support authentication protocol requested by server; consider upgrading MySQL client in c:wwwdcdjpaneldatabasedb.php on line 27 Client does not support authentication protocol requested by server; consider upgrading MySQL client' I understand that it has something to do with old db access libraries. I really don't understand the instructions to be done, so if I could be provided with a full-detail list of instructions on fixing this error, I'd appreciate it. By-the-way, I looked into the documentation of the MySQL software and looked at the website for support, which was a little pricy for one needed solution.
Authentication Protocol
A problem with MYSQL Front 3.1 that will not connect. I understand that there is a problem with MySQL changing the password hasing functions in ver 4. One solution is to start the server with the --old-passwords flag, how do i add the flag??
ODBC Driver Does Not Support The Requested Properties
I'm trying to log data to a certain schema on MySQL 5 server via DSN. MySQL connector/ODBC driver version is 3.51., running in Win XP. *Sometimes* I receive the following error: --- An error occurred calling 'LogResults' in 'DBLog' of 'DBLog 1.0 Type Library' An error occurred executing a statement. Schema: My Recordset. Statement: My_Table. ODBC driver does not support the requested properties. Description: ODBC driver does not support the requested properties. Number: -2147217887 NativeError: 0 SQLState: Reported by: Microsoft OLE DB Provider for ODBC Drivers Source: DBLog --- The worst thing is that sometimes everything seem to be ok but no data is logged to database! This case is very confusing, the logging has been successfull before and I've not been able to trace this. I've checked the basics (SQL syntax, schema priviledges, ...).
Support Authentication
i have installed php4.4 with iis and mysql5 and phpmyadmin is 2.5 version and mysql administration tool too i get the error client does not support authentication protocol, i will be very pleased if someone suggest a good workin version for all mysql php and phpmyadmin
How To Connect Directly To Mysql Server Port (3306) Using TCP/IP Protocol
I want to develop an application in LabWindows/CVI (ANSI C developpment software for instrumentation) from which I could connect directly to mysql server port (3306) using TCP/IP protocol. This developpment environment allows me to use functions to connect, read and write to a certain port using TCP/IP protocol. I must say I'm new to using MySQL and I searched the manual without any response to my question.
Connection String Authentication To My Server
I'm having a tough time figuring out the proper connection string to connect to my existing database. Using: * MySQL server 4.0 on a remote Linux Server. * Developing in VS 2005 (VB) on a PC that is apart of our corporate MS domain. * Downloaded and installed Connector/Net 2.0 Problem: I'm using the connection string: ("server={0}; user id={1}; password={2}; database=test; pooling=false", server.Text, userid.Text, password.Text) When executed with userid="sam" the error message that is returned is "Access denied for user: "sam@<mypc>.<corporatedomain>.com" When executed with the userid="sam@<remotehost> the error message returned is "Access denied for user "sam@<remotehost>@<mypc>.<corporatedomain>.com". No matter what I do, the connector keeps appending my current domain id to the end of the user string. "sam" is a authorized user for the MySQL on the remote linux host (been using it for years).
Server-Client
------=_NextPart_000_004C_01C3507A.4005F3F0 Content-Type: text/plain; charset="windows-1254" Content-Transfer-Encoding: quoted-printable Hello, I coded a program by using VB 6.0 I will use this program on = network(nearly 12 user). is it necessary to code two different program = for both of server and client. Or, Can I solve this problem by MYSQL = Control Center. H=FCseyin DEM=DDRA=D0 =DDstikbal Furniture =DDnt. ------=_NextPart_000_004C_01C3507A.4005F3F0--
Server-Client
I coded a program by using VB 6.0 I will use this program on = network(nearly 12 user). is it necessary to code two different program = for both of server and client. Or, Can I solve this problem by MYSQL = Control Center.
Fw: Server-Client
I think that I should ask the question like that. I want to run MySQL on 14 client. What am I do. I try but There is a problem that i can't find.
Server Vs Client Version
I have a server where the mysql Server version is 5.0.27 but the client version 4.1.12. I know if the client version is newer than the server then its the server version that counts - is it the same the other way around?
VB + MySQL Client Server Application
I would like to know about what the most important things to be installed in every workstation if I will used VB and MySQL using the ODBC driver. Is there a need to install VB, MySQL, ODBC Driver in all computers? If possible can you give simple snippets in configuring MySQL and ODBC in VB code.
Whats Needed On Client PC And Server?
I'm currently using MySQL 5.0.9 with Visual C++ 6.0 and Qt. My project is on the server, with all the dll's needed as well as MySQL with my database. I can only access my database on the server from a client station if this client station also has MySQL installed. It doesn't even execute the queries in my code. Do I need to use server scripts and if so how do I do it? Is there in Windows something like a mysql-server and mysql-client package? Do we need to install MySQL on all of the client stations?
Apps Use MySQL Server Or Client Version?
I am using a shared hosting setup and I'm trying to figure out which version of MySQL my applications are actually using. My host tells me that the MySQL server is running version 4.1.16, but when I do a phpinfo it shows client version 5.0.16. Since some scripts don't support MySQL 5, I am trying to clarify which version my applications would actually use. Any ideas?
Controlling The Server -> Client Fetch Size
I see that mysql_use_result() and mysql_store_result() allow you to retrieve results into the client memory space either a single row at a time from the server or the entire result set from the server. Is there a way to control the fetch size so that, say, I get 100 rows back from the server at a time? Cursors would probably do the trick, but then you can't build things in 'C'.
How Do I Setup The Server On A Network Drive For Client Software To Access?
I'm building a database system for our department at work and have successfully installed the MySQL Server 5.0 to my local machine and developed my user interface to access it read/write/update, etc. just fine through VB6 and the ODBC driver. My problem now is how do I get the database files and server functions moved/transplanted/installed on a network share drive (Windows 2000) that my peers and I have access to, so that I can deploy me client user interface onto their machines so we can all access the database across the network and I can get the files off my local hard drive?
#1251
when i try to connect to the mysql server i get this error, but it should run and be ready. it is mysql version 5.0.13 and it is installed on a microsoft windows xp prof with sp2. what could be wrong?
#1251
i have a Microsoft Windows 2003 Server with IIS 6.0, PHP Version 4.3.9 and MySQL 4.1.7 ... i installed PHPMyAdmin Version 2.6.0-pl3 ... all software is running corectly... but when i start PHPMyAdmin following error massage is comming : #1251 - Client does not support authentication protocol requested by server; consider upgrading MySQL client .
Error: 1251
Error: 1251 SQLSTATE: 08004 (ER_NOT_SUPPORTED_AUTH_MODE) Message: Client does not support authentication protocol requested by server; consider upgrading MySQL client.
Error 1251...&
o database made.Error connecting to db Program: d:hosting yavogohtmlinstalldb.php - Line N.: 45 Database: nyavogo Error (1251) : Client does not support authentication protocol requested by server; consider upgrading MySQL client Big picture: trying to install PostNuke onto a server at godaddy.com. I get 60% through the Postnuke install, then get the above error messages. I've tried creating & deleting databases, using many different combos of hostname & password. Nothing. Only the error message switches from the one to the other--1251 & 1045.
Remote Connection To MySQL DB Server From Client With No MySQL DB
I have MySQL server running on a Solaris machine. I have a Perl tool that is run on multiple operating systems (Linux, Solaris, MKS on windows, CYGWIN on windows). I would like to post to the MySQL database on the Solaris machine from this script when it is run on the different local clients. All these clients share a single network share (available via Samba on windows). Is there a Perl module that I can install in the network share that I can use to connect remotely to the server DB?
Error Message - 1251
I've recently upgraded MySQL to 4.1 and am tryingto get an old PHP based website to work and I'm receiving the message: Login Validation Failed: 1251: Client does not support authentication protocol requested by server; consider upgrading MySQL client - Make sure your Username, password and hostname are correct. " Searching this site for information on how to solve my problem a reference indicates that I should - "Upgrade all client programs to use a 4.1.1 or newer client library. When connecting to the server with a pre-4.1 client program" What does "pre-4.1 client program" mean? Is this referring to PHP?
Russian Language (win-1251) At Export MySQL 4.1
I have a problem with mysql back-up of my site. At site is present the material in russian language (the coding WIN-1251). Presently, hosting company has done upgraid MySQL bases to version 4.1. The Site works orderly, but when making back-up bases (Export), in the base are absent the symbols in russian language. At export of the base through PHPMYADMIN , the situation a bit better, some cyrilic symbols are seen, but not all. How it is correct to do the MySQL export to were seen cyrilic symbols?
Advice Requested
I'm going to be creating a signup form with the standard fields (fname, lname, email, etc), plus user definable fields. Currently, I'm kind of stuck on how to go about doing this. My users table has an id field (PK), email field, IP address field, etc. I want to give the site admins more control over what they can put into their signup forms. Some people may want to have a website field, others may want to have a field for the user's fav book. Whatever. Now, if I put these into the users table, I'm now fixed at how many fields I can have, correct? I mean, I can set a determined number of fields and call them custom1, custom2, etc. and let the admin define their user-readable names, but it's still a fixed amount of fields. I could create a new table with 2 fields - name and value - where name is the PK. That way the admin could enter as many as they want. But how would I then have the same fields in the users table to hold the data?
Table/Query Guidance Requested
I want to build two tables from which I will pull information. One table (roster_table) contains names of employees. One table (groups_table) contains names of groups within a department roster_table: staffID (unique identifier for an employee) staffLast (last name) staffFirst (first name) groupID (a unique groupID from the groups_table) groups_table groupID (unique identifier for a group) groupName (the name of the group) One employee may belong to many groups, but I don't know how to structure my roster table such that I can show that in a single field (in other words, not have multiple groupID fields in the roster table). How would one go about structuring the roster_table so that this can be accomplished? I ultimately want to pull a roster of employees, and show all groups to which the employee may belong. Below is an example I tried, but it did not work. I'm guessing it is because I only place a single groupID value in the roster.groupID field as noted above. SELECT roster.staffID, roster.staffFirst, groups.groupName FROM roster_table roster, groups_table groups WHERE roster.groupID = groups.groupID ORDER BY groups.groupName, roster.staffLast (To be honest I cannot even say if this is a design problem or a query problem.)
REQ: Help With M:N Cross Referenced Tables Requested
Table "person": Fields: pid, name, email Table "address": Fields: aid, street, city, zip, state, validfrom Table "xref_pers_addr": Fields: refid, pid, aid, timestamp for security reasons I want to configure the user's access to the database to be write only, no delete or drop should be allowed. Hence when an address of a person has to be updated (e.g. because he or she moved) a ne entry has to be made in the address table with an updated "validfrom" field. In the long run there will be more than one address entry per person, and only the youngest entry is the valid one. Which SQL query allows to get a list like pid, name, street, city, zip, state, validfrom that only shows the latest address per person? I assume there must be an sql hack for mysql version < 4.0 which accomplishes that without using subqueries that are only available in mysql >=4.1. which i do not intend to deploy on my server. My guess was this: SELECT pid, name, CONCAT(MAX(validfrom)," ", street," ", city," ", zip," ", state) FROM person,address,xref_pers_addr WHERE person.pid=xref_pers_addr.pid AND address.aid=xref_pers_addr.aid GROUP BY pid; That grabs only the latest address, but I obtain the whole address in one field an I have to disassemble it later into the respective fields which is quite cumbersome. Any other option to do that without using subqueries?
Going From Client Side, To Server Side.
I was wondering: if i install MySQL, and the PhP egine on my computer, does this mean, i will have to connect my domain name, or URL, to my machine? I am having a hard time figuring out in my head the process by which i go from having something on the client side end of things, and the server/host side of things. I know that PHP is pretty much a language that you basically have as files, much like an actual HTML page. To this end then, i realise i will simply have to load my PHP scripts onto the server in which they are supposed to work. I am not however sure how i would do the same with MySQL. I do not know enough about the latter to know how its transferrable. So far, from what i read, i use a Console to test certain commands, like the creation of a Table, or the deletion of a Table. But how do i actually connect MySQL to a server that is not my own machine?
Assitance Requested On Syntax With Joins (outer)
Select d.* from ( select agent_addr, max(date_time) from eventlog where priority = 1 group by agent_addr) d, (select agent_addr, max(date_time) from eventlog where priority = 6 group by agent_addr) u where d.agent_addr = u.agent_addr and d.access_time >= u.access_time The above statement is to get certain data from an event table. I need all of the lines where the event is 1 and there are no newer event 1's or event 6's I need to know what devices are currently down (Priority 1) based on this history table. where there is no newer event 1 entries for the agent_addr, or there is no newer priority 6's for that agent_addr (priority 6 means device is back up) I'm stumped on the syntax to do joins, or to get this to work. the table works like the following device goes down entry is made as priority 1 eventid 1 device comes back up new endtry is made priority 6 eventid 2 device goes back down another entry is made as priority 1. eventid 3 I need to make sure i only am getting a list of the latest status of each device in the aformentioned scenario it would be the one with event ID 3
MySql Protocol
I am trying to communicate to a MySql server using sockets and java, but unfortunatelly I am having some problems. During the handshake the server doesn't reply to the client when it sends the loging information: 62 00 00 01 05 00 00 00 00 00 00 01 08 00 ×23 114 111 111 116 0 14 ×20 Can you guys spot any mistake here?
How To Set Compression Protocol In My.cnf?
What is the syntax for setting the client to use the compression protocol in my.cnf? I am using some high level components which don't expose that functionality and I need to set it globally so it is used wherever possible by all connectios. It is for use over a normal phone connection, this is why the compression will be so important. I know it is set in the [client] section. I read it sometime ago but forgot about it.
Compress Protocol And SSL
1 I would like to use compress protocol I do this MYSQL* m = new MYSQL; m.option.compress = true; unsigned int Flag = 0; Flag = Flag | CLIENT_COMPRESS; mysql_real_connect(m, "host", "user", "password", "db", 3306, NULL, Flag); it's all ok my question is Do I must set "m.option.compress" or I can only write "Flag = Flag | CLIENT_COMPRESS;" to use compress protocol? ------------------------------------------------------------------------------------------------------------------------ 2 I would like to use SSL protocol I do this MYSQL* m = new MYSQL; unsigned int Flag = 0; Flag = Flag | CLIENT_SSL; mysql_real_connect(m, "host", "user", "password", "db", 3306, NULL, Flag);.
Login: Protocol, Firewall?
MySQL 5.0.33 + RedHat AS 4.0 At the local system, I have two mysql users: User@localhost; User@'%'. I tried the below three login approaches at local: A. mysql -uUser -pPasswd B. mysql -uUser -pPasswd -h127.0.0.1 C. mysql -uUser -pPasswd -hHost // Host is the IP of the system I have three questions: 1. A is via mysql.scok, why B isn't? B is via TCP. 2. Why the login by B is faster than C? But in my tests, both of B and C were via TCP. 3. I launched iptables, and rejected 3306 port, why B and C still could login normally?
Protocol Used Between The MySQL Clients
I'm looking for documentation on the wire protocol used between the MySQL clients (odbc, jdbc, etc)and MySQL server. Pointers to files in the source code would be great too. I've been browsing the source but haven't come across any key headers or source that documents/implements it.
|
TRACKER
