DBD::mysql::st Execute Failed: Lost Connection To MySQL Server During Query
I am using perl to connect to a database and then pull the rows off of the table one by one to manipulate the data.
If I use a smaller table (~8 MB), I wait for around 20 seconds but then the table values are read just fine. However if I use a larger table (~30 MB), I wait for a while and then I get the message:
DBD::mysql::st execute failed: Lost connection to MySQL server during query
I have tried searching for the solution to this problem and haven't found anything that helps yet. I have changed the values of 'max_allowed_packet' and 'wait_timeout', with no effect.
Any ideas?
View Complete Forum Thread with Replies
Related Forum Messages:
Lost Connection To MySQL Server During Query (LAMP Server)
I recently installed an ubuntu LAMP server for my website and upon trying a script that uses a mysql database (which I set up the tables via phpmyadmin) and I get this error: Warning: mysql_connect(): Lost connection to MySQL server during query in /home/tanner/Desktop/bot/DoctorWho/db_connect.php on line 4 I've searched the forums and I've gotten no answers. Anyone know the answer?
View Replies !
Lost Connection To MySQL Server During Query (install)
Bog standard SuSE 8.2 Linux install. I have installed mySQL (off the SuSE 8.2 distro CDs). I can connect locally, e.g: bealzebub> mysql -u root -p mysql -h localhost ....logs me in just fine. However, this: bealzebub> mysql -u root -p mysql -h bealzebub ....causes the connection to fail with: "ERROR 2013: Lost connection to MySQL server during query". Its the same if I try to log in from another machine.
View Replies !
Lost Connection To Mysql Server During Query (Windows XP)
I have following problem: when I try to connect from Windows XP to mysql server (linux computer), I get the following error: Lost connection to mysql server during query. This happens when I test the connection. I have firewall in linux, so I opened the port 3306. Is there something else I need to change to make sure that the connection will work properly?
View Replies !
Lost Connection To Mysql Server During Query (VB Front End)
I'm running mysql stored procedure using VB as front end. While clicking Ok button in application it calls 3 stored procedures and returns a resultset. First time it works properly. If second time clicked the error 'lost connection to mysql server during query' displayed. Third time works fine. Like this alternatively throws error message.
View Replies !
2013 Lost Connection To Mysql Server During Query
I am using mysql 4.1. When a large query is made; the page loads for a while, then it goes to a blank page,making me think it is a memory problem, so I modified php.ini which can be seen below. php.ini(excerpt) memory_limit = 70M post_max_size = 15M file_uploads = On upload_max_filesize = 14M expose_php = Off max_input_time = 60 when turning on error messages I get the error Mysql::query: 2013 - Lost connection to MySQL server during query SQL=SELECT id, title, module, position, content, showtitle, control, params FROM jos_modules AS m LEFT JOIN jos_modules_menu AS mm ON mm.moduleid = m.id WHERE m.published = 1 AND m.access <= 2 AND m.client_id = 1 ORDER BY position, ordering
View Replies !
Lost Connection To MySQL Server During Query / Server Has Gone Away
All of a sudden the server stopped working. When trying to execute a simple INSERT both from PHP and Query Browser, the server crashes and I get either "Lost connection to MySQL server during query" or "Server has gone away" errors. The problem started on 5.0.18, and upgrading to 5.0.41 didn't help. I'm using Windows XP SP2. I've seen quite a few posts on similar problems, but no real solutions though. Is that a bug?
View Replies !
Error Code 102 :: Lost Connection To MySQL Server During Query
After changing RAM and the ethernet card of my DB server, the problem of getting frequent: Database error (error code 102) Could not connect to database server (Lost connection to MySQL server during query) Still occurs ;/ I've tried to eliminate all factors (like multiple servers, load-balancers, replication etc) so I have wrote a php script that only does the following: - opens db connection - does a simple select - closes db connection If I refresh this page over and over, every 6-7 times I get the above error. Anyone have any further solutions, ?? I've tried the software (re-installing mysql, upgrading, etc....) and tried the hardware (RAM, ethernet card). Nothing seems to help. The DB server is Linux Redhat 7.3 with the 2.4.18-3smp kernel. I am running MySQL standard 4.0.13.
View Replies !
ERROR 2013: Lost Connection To MySQL Server During Query?
I have recently installed suse 9.0 linux which has MySQL 4.0.15 as part of the distribution. After I set up my users I was able to use mysqldump and pipe it into mysql on my windows machine running 4.0.16 to dump a database to the linux box. However, now when I try to login to the linux box from another machine on the network I get a query timed out error immediately after I enter the command line to start the mysql client. mysql -h 192.168.1.2 -u cdw -pxxxxxx ERROR 2013: Lost connection to MySQL server during query The error happens with in a small fraction of a second after I type in the command. I can login from the linux machine just fine though.
View Replies !
Error 2013: Lost Connection To MySQL Server During Query
I get this message instantly (< 1 second) when I try to connect to the MySQL server from a remote host. I am using "mysql" at the remote client. Does not matter where the remote client is: on Solaris, on RH 7.2, on Fedora. Same thing every time. I am using the the mysqld as it comes out of the box on Red Hat Linux 8.0. I tried a google search on Error 2013, and there are a lot of responses:
View Replies !
Lost Connection To MySQL Server During Query (create Database)
I downloaded the MySQL trail version a few month ago, it worked fine. however after i brought 1 x EMS MySQL Manager Professional (Non-commercial license) and registered but the tool doesn't work anymore... when i try to register a database and try to get it connect, it through me a error message "Lost connection to MySQL server during query". more to it... when i try to create a database at my local host, a error messate says "can't connect to MySQL server on localhost (10061)... PLease help!
View Replies !
Lost Connection To MySQL Server During Query After Script Takes 60 Secs
I get the error "Lost connection to MySQL server during query" at the mysql_select_db when reaching this part of the code after 60 seconds of script execuation has already passed. Works fine if the script execution time when reaching this is under 60. Tested with Sleep() and I'm 100% sure that the 60 second barrier is causing it. I just don't know what the barrier is.////
View Replies !
User-defined Function: ERROR 2013 (HY000): Lost Connection To MySQL Server During Query
With mysql-4.1.1-alpha, using any User Defined Function ( UDF) at the query execution stage, on Linux 2.6, gave me the following error: "ERROR 2013 (HY000): Lost connection to MySQL server during query" However, upgrading to mysql-4.1.2-alpha seemed to solve the problem. Both versions were configured exactly as follows ../configure --with-openssl --enable-thread-safe-client --with-mysqld-ldflags =-rdynamic The only way I could solve this was by upgrading to 4.1.2-alpha-log. Then, recompiling the functions, drop the old UDF functions, then, recreate. So far so good. Anyway, if you run into this problem, or just want more detail on the sample User Defined Functions that come with MySQL ( /sql/udf_example.cc), I've put my notes in the following link ( TIP 27 )
View Replies !
Lost Connection To MySQL Server During Query Socket Error On Read. WSAGetLastError Return 10054($2746)
We just migrated our MySQL database from a NetWare server running version 5.0.21 to a openSUSE box running version 5.0.45. Everything ran fine for a couple of days, then clients began losing their connections and creating new ones without the old threads being terminated. This behavior is the same for the Delphi client we use to access our database as well as the MySQL Administrator tool. I've tried adjusting connection_timeout, but overall the settings for this server are the same as the previous one that ran without issues for a year.
View Replies !
Lost Connection To MySQL Server
I am using PHP to invoke mysql_query to my database. In most cases everything works fine and the query executes perfectly. Sometimes, I will get a burst of errors and the query will fail with the following error: Lost connection to MySQL server during query (err_no 2013) Does anyone know what could cause this? Could this be a mysql configuration problem, or maybe some network problem?
View Replies !
DBD::Mysql::St Execute Failed
DBD::mysql::st execute failed: Duplicate entry '1-2070395153-0000-00-00' for key 1 at transfer_from_main_table_to_others.pl line 59 Is my table structure causing it? mysql Code: ....
View Replies !
CREATE INDEX Crashes Server (Lost Connection...)
I'm having trouble with a table I created quite a while ago and now want to add an index to. Here's what I get if I try to add an index on the host field of my table: mysql> create index Index_host on uselog(host); ERROR 2013 (HY000): Lost connection to MySQL server during query Connection was lost because the server crashed. The Windows event log has an event that says "Faulting application mysqld-nt.exe, version 0.0.0.0, faulting module mysqld-nt.exe, version 0.0.0.0, fault address 0x0017dc06." I've also tried the allegedly identical "ALTER TABLE uselog ADD INDEX Index_host(host)", as well as trying to index a different column, all with the same outcome (server crash). Thing is, I had no trouble adding an index to the same table a week or so ago. The table was smaller then (and had only one index), but even now, it's not very big by DB standards, so I can't imagine that's the problem. (My table had ~900K rows earlier today, which I pruned down to 140K rows after my first failed attempt to add the index. Puny! Only 55MB data length, according to MySQL administrator.)
View Replies !
Statement Execute Failed
I am trying to store a binary image into a blob field and I am getting the following error: DBD::mysql::st execute failed: MySQL server has gone away at ...(file and line number here). I am following several online tutorials on the subject and each one (different implementations) fail at the execute line. If someone could tell me how to fix this I would greatly appreciate it. I have already tried commenting out the dbh->disconnect; line and it had no effect. Here is the code that is failing. use DBI; our $dbh = DBI->connect('DBI:mysql:pic_test:localhost','whateveruser','whateverpassword', {RaiseError => 1 }); my $sth = $dbh->prepare("INSERT INTO tbl_files (ImageColumn) VALUES (?)"); open(my $fh, 'input.jpg') or die $!; read( $fh, $var, -s $fh ); $sth->execute($var); $sth->finish; $dbh->disconnect; I am using MySQL server 5.0 on Windows XP and Active PERL 5.8.8.
View Replies !
Installing MySQL :: Connect To Server At 'localhost' Failed
I am just installing mySQL on my laptop. I am just setting the root password. I have already set my password to twinsister: C:mysql in>mysqladmin -u root passsword twinsister This worked fine. Now I am trying to set the hostname, and I have read in a thread on the net, that you should always set this to localhost, so I have typed this: C:mysql in>mysqladmin -u root -h localhost password twinsister However, this is the error message I get: mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user: 'root@localhost' (Using password: NO)' This is probably very simple to solve, but I just can't think what I am doing wrong.
View Replies !
Lost Username And Password To MySQL Server....
I have been using the MySQL control center and had my usernames and passwords for the MySQL server stored in the control center. I recently lost everything on my PC including the usernames and passwords. Does anyone know if there is a way to reset or remove the passwords from MySQL so that I can make new ones? I do have the root password for the server that MySQL is running on.
View Replies !
Error Message: MYSQL RealTime: Failed To Connect Database Server Asterisk
I have installed asterisk version 1.2.14, asterisk-addons 1.2.5 and mysql version 4.1.21. on Red Hat linux version 9.0. I created the database 'asterisk' in mysql so that the asterisk cdr record can be stored in my sql. I has edited the asterisk modules.conf to load cdr_addon_mysql.so and also change the configuration in cdr_mysql.conf. Finally, i do a reset on asterisk. I got the below error message after i reset my asterisk. Error [6825]: cdr_addon_mysql.c:231 mysql_log: cdr_mysql:cannot connect to database ERROR[6969]: res_config_mysql.c: 651 mysql_reconnect: MYSQL RealTime: Failed to connect database server asterisk on (err 1045). Check debug for more info.
View Replies !
MySQL Admin - Lost Thread On Specific Like Query?
mySQL win32 (4.0.22) I am using mySQL Control Admin and seeing a lockup on a thread specific to a like query. select * from table1 where field1 like 'http://h%' limit 100 This request will sit (thread) forever and never return any records. (status : sending...) However : select * from table1 where field1 like 'http://h%' limit 100 returns records immediately, no problems... I have already run : /mysql/bin/myisamchk --sort-recover dbtable1, no errors, no problems... How can I tell what this thread is really doing or if any additional problems exist with this table using myisamchk?
View Replies !
Remote Connection To MySQL DB Server From Client With No MySQL DB
I have MySQL server running on a Solaris machine. I have a Perl tool that is run on multiple operating systems (Linux, Solaris, MKS on windows, CYGWIN on windows). I would like to post to the MySQL database on the Solaris machine from this script when it is run on the different local clients. All these clients share a single network share (available via Samba on windows). Is there a Perl module that I can install in the network share that I can use to connect remotely to the server DB?
View Replies !
MySQL And PHP How Can I Get Connection With The Server.
At home I have server (windows2000 with apache). When I start mysql form the commentline or with the administrator program I haven no probleem. I can make databases; everthing looks okay. Also PHP is installed and working okay. To test MYSQL in combinatie with PHP I wrote a small script (make connextion with mysql and show the record in the database. When i try it I get the following message: "Client does not support authentication protocol requested by server; consider upgrading MySQL client" What wrong, who can help me? Mysql version is 4.1.14-nt, mysql client version is 5.0.11
View Replies !
Connection To MySQL Server
Can you connect to a mysql server with the same user more than one time at the same time and all sessions to be different? I want to write a C program who creates several child procesess and in each child there will be a connection to a mysql server and want to now if I have to connect from each child using a different user or I can use one user for all and the sessions to be different.
View Replies !
Connection Failed
Running mysql on localhost is not problem (connecting and all that). Its when I try to connect to mysql from something thats not localhost that problems begin. Im using MySQL Query Browser to connect from my home computer and I keep getting this message: MySQL Error number 2003 Cant connect to MySQL server on bla bla bla... I made sure that the user im working with is 'user'@'%' granting all privileges using commandline in mysql and phpMySQL and its still not connecting.... mysql> show grants; | GRANT ALL PRIVILEGES ON *.* TO 'my_user'@'%' IDENTIFIED BY PASSWORD '*D1A4EA9EEEEEE8F69F709A5F0F96DDDD0F78ED6D05F' WITH GRANT OPTION | | GRANT ALL PRIVILEGES ON `my\_table`.* TO 'my_user'@'%' WITH GRANT OPTION
View Replies !
Optimize MySQL Server Connection
I'm looking to make my site faster, and the first place I want to tackle is my MySQL server. I have no local or shell access to this server, so i'm not sure what I can do, essentially i have access via written code in PHP and phpMyAdmin. Basically, the first thing i want to do is run a benchmark to see where the server is now, and what commands are slower then others, and the like... I found This. But it is if you run your own server.
View Replies !
SourceForge.net MySQL Server Connection Failure
If anybody has any experience SF.net's mySQL server, your help would be greatly appreciated. When I try to connect to the DB install Movable Type (http://www.movabletype.org/) I get the following error message: Connection error: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) I think the socket may be located elsewhere (not at '/var/run/mysqld/mysqld.sock',) but I cannot find the true location in SF's documentation. If anybody has recieved such a message and has solved the problem.
View Replies !
How To Minimize The Connection Time To Mysql Server
i have a running mysql 5.0.12 beta - standard server & client running on FEDORA CORE 4. every thing worked fine for few days & now it is causing problems in the following areas. 1>The Connection time between client & server is too long since i need to connect & diconeect the connection with the server as my application is running in a handheld device.But queries will execute at real speed .? 2>This delay scenario is same for the client connecting to local server aslo. 3>I tried with disabling firewalls,trusted n/w , optimized database & still the problem remained same. 4>will grant user affects connection time ? i used the following grant syntax grant all privileges on *.* to 'user'@'192.168.0.0/255.255.0.0'
View Replies !
Can't Establish Connection To Localhost With MySQL Server
I recently installed MySQL server on my PC, for the primary purpose of converting MS Excel files to core SQL (using another conversion program to access the server interface)... In my conversion application, I am unable to establish a connection with "localhost".... I tried going into the MySQL command line client, but I can't get past the initial password prompt...FYI, I didn't enter a username and password during installation because I didn't want that..... Anyway, all I really want to do is convert Excel files periodically...Does anyone have any ideas on what I need to do to accomplish this? Also, my conversion application is a trial version and expires in a few days...Does anyone know of any good, FREE conversion applications?
View Replies !
Localhost Mysql Connection Pointing To Remote Server!
This one is beyond bizarre. For a few days I've been having trouble working on my site on my local machine. Everything was dog slow, and the information I was seeing coming out of the database was oddly out of date, even though I had synced to my live server several times. I finally discovered that the records I was seeing were consistent with the tables I have up on my Media mysqlle host, which I've been working on switching over to, but is not live yet. So to put it more clearly, when I'm running my local version of my site on my local version of Apache (on my Windows Vista laptop): 1. The php files being interpreted are indeed the ones on my local machine. 2. Any MySQL queries somehow reach up to Media mysqlle, and query THAT database (even though it has different login credentials). I'm using the following lines to create the MySQL connection: $sqlHandle = mysql_connect('localhost', '<myusername>', '<mypassword>'); mysql_select_db('<mydatabasename>', $sqlHandle) or die(mysql_error()); Is this weird, or what? Any idea what's going on?
View Replies !
Connection Lost
I've got the following problem: I've an select wich gets binary Data out of my sql-table. The type is longblob and i've lauded some files into it previously with the LOAD_FILE function. The files have a size between 0.5 and 3MB. I'm loading the data out of the tables with a select like: SELECT data FROM files WHERE file_id=1 After executing the command and some seconds waiting (70 seconds) i get the error "connection lost". The file i'm actually trying to load has a size of 1,5MB. (Im using mysql with C++ and the execQuery returns with false after that 70 seconds). The code above worked fine as long as i use my computer as client use the server in my LAN or the remote server (client and server located in Germany). When my mate tries to use this code from India the above error occures. The question now is how can i handle that error? What can i do to get the file even if the inet connection might be a little bit unstable or slow? Im specially interested in the way how the communication between client and server works. Is the "connection lost" because of instability or because of a timeout? Every other query works fine from india, only this one which needs some bandwidth is failing. Besides: i've set the following parameters both for server and client: mysql_opt_timeout = 5; mysql_opt_max_allowed_packet = 16*1024L*1024L; //16MB for the mysql_opt_timeout: is this a timeout which is only important for establishing the connection? or does it affects every query?
View Replies !
Lost Connection :: Red Hat Fedora
i have mysql server located in in machine that used Red Hat 8.0 and my mysql server version was 3.23.58. I am trying to connect using my machine..And currently i used Red Hat Fedora...But when i am trying to connect to mysql server i got this error message..... "ERROR 2013: Lost connection to MySQL server during query" And i am also trying to killall my mysqld and start the mysql server through mysql kernel.... /usr/libexec/mysql -Sg --user=root& After that, when i tried to reconnect it, it's hang up !.....nothing to be done and i need to start my machine back to run mysql.
View Replies !
Lost Connection :: 2 Servers Over LAN
Ok heres a quick background on the situation. I run a large mysql orinated website, and tried splitting the load between 2 servers together connected via lan. On server 2 im running debian 3.0 testing/unstable with MySQL 4.0.24. When i try to execute a php mysql search script from Server 1 I get this error: Warning: mysql_pconnect(): Lost connection to MySQL server during query .............. Connection Error I have searched googled, and found a possible solution, which turned out did not work. I simply added these 2 lines to my /etc/hosts.allow /etc/hosts.allow mysqld : ALL : ALLOW mysqld-max : ALL : ALLOW Also I edited /etc/mysql/my.cnf and added wait_timeout 16000
View Replies !
HTTPS :: Lost Connection
I'm atmysqlting to connect to a remote MySQL host on an https connection. I'm using the standard mysql_connect, and I seem to get a response, but the function returns an error stating "Lost connection to MySQL server during query."
View Replies !
Lost Connection Problem
I have problems with the connection to the MySql server. The problem only occure when running the application on the webserver, never on the local machine. A strange thing is that it not allways happen, just sometimes. I wounder if the problem depends on a closed connection but then it should appear all the time or ..... ? Code:
View Replies !
|
TRACKER
