MYSQL :: Looking For Query To Get Time Of Last Column Count Increase

Count(name) Increase
I have a table shop_products
I try to count the products that were enter in January 2007
I use this:
select count(name) from shop_products where month(data)='1' and year(data)='2007'
When I execute this first I receive, for example, 100
After 2 sec...102
Like it counts the number of seconds.
My shop has more then 20.000 products..but I think there is no problem for mysql

View Replies !

How To Increase Performance Of Query
I am using mysql 5.0.45 .I want to make a table for newsletter which may be have millions of records.

Is it right way to store millions of records in one table because it will effect the performance of query when we use select statement.

what is the best way to do that.

View Replies !

#1136 - Column Count Doesn't Match Value Count At Row 1
I'm getting the above error with the following SQL Statement. I cannot seem to find the error in the code. The select statement does pull multiple rows.

I'm using my SQL version: 4.1.19

Any clue on why this isn't working?

INSERT INTO `Grants` ( `Project_Code` , `Grant_Code` , `Fiscal_Year` , `Capital` )
VALUES (
(
SELECT Project_Code, Grant_Code, FY, SUM( Capital )
FROM Grants_Temp
WHERE Project_Code = 'OSUT'
AND FY = '2006'
AND Claim_Month = '072006'
GROUP BY Grant_Code
ORDER BY Grant_Code
)
)

View Replies !

Column Count Doesn't Match Value Count At Row 1
I am getting the following error when I run my query.

Column count doesn't match value count at row 1

I have looked up this error and have checked and I appear to have the right number and names in my query. In the DB table I have 34 columns, and that is what I have in the query.

The last 4 in the query are for the names of the images being uploaded, but am not sure how this all works, so I don't know if I need them, but have them there until I know for sure. Comment, Purchase and Remarks are not used in this form, but I have added them so everything is being shown in the query. Code:

View Replies !

Column Count Doesn't Match Value Count At Row 1 ...
I don't even know what to do to start fixing it.

"Column count doesn't match value count at row 1"

View Replies !

Count Time
I am using at Home the XAMPP installation where i have Mysql 5.0.51a. On the Webserver is the version 5.0.32

My SELECT ist:

SELECT cz.id_stammdaten, st.nachname, st.vorname, sum(TIMESTAMPDIFF(minute,start,ende)) AS anwesend
FROM cashzeiten cz
INNER JOIN stammdaten st ON st.id = cz.id_stammdaten
WHERE cz.ende <> '0000-00-00 00:00:00'
GROUP BY cz.id_stammdaten

On my Home-Installation it works. On the Webserver it doesn't works

View Replies !

Use Count And Join At The Same Time
How to use count and join in the same time?

View Replies !

Trying To Get Total Count Plus Count From WHERE Clause In One Query
I am fairly familiar with mysql, have been using it with php for about a year now for my development work. One query I am stuck on is the following. I am doing reporting, and need to find the count from a WHERE clause compared to the total count for that group. For the sake of an example, let's say I have a prize table that contains a complete list of prizes. There is a column to list if the prize has been won or not (prizeUsed - Y or N) and another that has the prize name (prizeName - string). I want the final result to list something like:

Total Prizes ____________________ 100 of 850 ......

View Replies !

Time Column: Can It Be Formatted To HH:MM:SS.sss
Is it possible to format a time column to HH:MM:SS.sss, If so How?

View Replies !

Time Column With Format HH:MM
When I make a Time column in a mySQL table it automatically has the format HH:MM:SS. So if I insert e.g. the time "15:00" mySQL stores it as "15:00:00".

View Replies !

'Time' Column Type
Okay I have a column setup in one of my tables as the 'time' data type.

It has a couple records like:
12:00:00
14:30:00
07:00:00
12:00:00

and when I view the data on my ASP page it puts this out:

1/5/2003 12:00:00 PM
1/5/2003 2:30:00 PM
1/5/2003 7:00:00 AM
etc...

The main question i had was why is it throwing the current date in there? And how do I get rid of it?

Also is there a way for it to remain in 24-Hour format?

View Replies !

(RIGHT(column,4)*COUNT(*)
I am having an issue with one column in my table that is associated with a dollar amount. (E.g. $6.00 or $26.00)

I am trying to create a query that will take the total count of matching orders and multiply it by the order total.

Example Query:

SELECT *,COUNT(*) AS Count,(RIGHT(ordertotal,4)*COUNT(*)) AS total_rev
FROM `table`
WHERE (table.pkg_number <> '5%')
GROUP BY pkg_number;

The query gives me accurate results for any dollar amounts that are $9.00 and lower. I then change the (RIGHT(ordertotal,4)*COUNT(*)) to read (RIGHT(ordertotal,5)*COUNT(*)) to get results for orders that are $99.00 and lower but the $9.00 and lower results are incorrect.

I am very new at this, can anyone help me with a tip on how to combine them to get accurate results? Or is there a way to create the column in the table to handle dollar amounts more accurately. Currently I am using VARCHAR(25).

View Replies !

Calender Table - Time Column?
I am currently in the process of building a calender/date MySQL table that will
be searched for available dates for holiday tours?

I want to use a time column as there will be a restriction on places for up to 3
days so this will have to be taken into account.

View Replies !

Converting Column Time Zones
I have four tables, each have a column containing the DATETIME.. but they were stored in local time, CST,PST etc.
This is going to cause problems, so I need to convert these to GMT before daylight savings!Is there a way to do this all in mysql?

View Replies !

Select Date And Time In Same Column
I have table called mytable and there I have column named time
example:
time
2006-07-10 10:28:06
2006-08-18 20:48:22
2006-09-15 12:11:41
2006-10-12 23:06:02

is there any possibles that I can make query example:
SELECT *FROM mytable WHERE date BETWEEN 2006-07-10 AND 2006-09-15 AND time
BETWEEN 10:28:06 AND 12:11:41

My point is can I make query where I first find between date and after that I make
query where I find between time when information is in the same column?

View Replies !

Update Just Time In Datetime Column
I have a datetime column called foo, it currently has dates in it with all times set to "00:00:00".

I would like sql to update all the rows and set the time to "15:15:00" but leave the dates as they are today.

View Replies !

How To Fix "Column Count Doesn't Match Value Count At Row 1" ?
I've been trying to install a portal to my installation of Invision Power Board, and I keep coming up with this problem. I post here for two reasons: firstly is that no one is responding over at the portal creator's thread and I need help, second is that this error looks like a mySQL error that could be solved without the need of the creator if possible.

Here is the error returned:

mySQL query error: INSERT INTO `ibf_portal_box` VALUES (1, 'lang.last_topics', '<box><menu>10,20,30,50</menu>
<topics_show>10</topics_show>
<order>last_post</order>
<exforums></exforums>
</box>', 0, 'middle', '*', 0, 4, 'last_topics', '1')

mySQL error: Column count doesn't match value count at row 1
mySQL error code:
Date: Tuesday 21st of December 2004 08:43:10 PM

I am very new to mySQL and don't really understand it. What is wrong with the above that it is trying to insert, and how is it fixed?

View Replies !

To Count All Rows With The Same Value On One Column
I have a table that contains a few thousand rows and what I want to pull back is the number of rows that each have the same number in one column. Basically, pull back all rows and then display a total for each seminar happening.

I can join this table to tx_seminars_seminars that has a list of all seminars available but I can't work out how to get a total for each different seminar happening...

My SQL is:

SELECT COUNT(*)
FROM tx_seminars_attendances AS seatCount
WHERE seatCount.seminar=NEEDS TO PULL A LIST OFALL SEMINARS IN ONE BY ONE
AND seatCount.deleted<>1
AND seatCount.user<>3991
AND seatCount.user<>3992
AND seatCount.user<>4006
AND seatCount.dateDeclined IS NULL
AND seatCount.dateRemovalApproved IS NULL
AND seatCount.dateCancelled IS NULL
AND seatCount.dateAuthAbsence IS NULL
AND dateSubmitted IS NOT NULL

View Replies !

Union And Count With Same Column
How do you make a another column and count the column with the same ClientID and refSite. For Example as Follows:
345 , Site , Router , 2
712 , Site , Router , 1

mysql Code:

Original
- mysql Code

SELECT refClientID , refSite , 'Router' as type ,
FROM tblConnRouter
UNION
SELECT refClientID , refSite , '3G' as type FROM tblConn3G
UNION
SELECT refClientID , refSite , 'ADSL' as type FROM tblConnADSL
UNION
SELECT refClientID , refSite , 'Black Berry' FROM tblConnBlackBerry

SELECT refClientID , refSite , 'Router' as type ,
FROM tblConnRouter
UNION
SELECT refClientID , refSite , '3G' as type FROM tblConn3G
UNION
SELECT refClientID , refSite , 'ADSL' as typeÂ FROM tblConnADSL
UNION
SELECT refClientID , refSite , 'Black Berry'Â FROM tblConnBlackBerry

View Replies !

Count On The Same Column With Different Logic
I am designing a table that will have an item rating of -1,0,1 assigned to it. Now I would like to use COUNT to select the number of -1's, 0's and 1's in a 1 month time frame 6 month and an overall time frame. I know I can do this with multiple statements but is there a way to do this in one statement?

View Replies !

Meaning Of Column Time In Show Processlist
I would like to know (if possible, there is no explanation in the =
documentation) the exact meanning of the column "time" in the "show =
processlist" command.

Why is it sometime so hight ?
When is it reinitialize (and why) ?

Is there any correlation between the time column and the variables "wait =
timeout" and "interactive timeout" ?

View Replies !

Count Of Text Datatype Column
What is the SQL syntax to count the number of characters for a column which is defined as 'Text' datatype ?

Also, We are using a column called 'Note' of Text datatype which allows user to enter alphanumeric values from front end.

View Replies !

Trying To Select Values From Column And Count Each Different One
say my column values are thus:

1 | 1
1 | 2
1 | 3
1 | 4
2 | 1
2 | 2
2 | 3
3 | 1
3 | 2

my select is like this:

my $sth = $dbh->prepare("SELECT session_id, col2
From $table
");
$sth->execute;

while ( my @fields = $sth->fetchrow_array) {
print qq( $fields[0] );
}

I want to be able to show that there are three individual values (in col1) and that there are 9 values in col 2. I also need to show that (based on the number of values in col2 [relative to col 1]), that the average number is 3

Should I use select using UNIQUE (or some other value), or, should I select as shown but put it in a perl hash - or soemthing else?

View Replies !

Date/Time As A Default Values For A Table Column
I am new to mySQL, so this question might be simple.I want to add a default value to a column that is the current date/time. I am using the mySQL Administrator and will not allow me to use a function like CURRENT_TIMESTAMP() or NOW() as a default value. I used to do this with other databases (I always add a column to all of my tables called InsertDateTime and UpdateDateTime. It helps to track down data entry problems)

View Replies !

Help On Increase
lets say we have table with fields:
CommissionID (autoincrement)
UserID
Amount

and let say we have 3 records for one user:
1 (CommissionID)
22 (UserID)
10.00 (Amount)

2 (CommissionID)
22 (UserID)
15.00 (Amount)

3 (CommissionID)
22 (UserID)
20.00 (Amount)

now I need to get result which I will put in array later (select in form), and it should look like this:
10.00
15.00
20.00
25.00 (10+15)
30.00 (10+20)
35.00 (15+20)

View Replies !

Increase An Integer By 1
I can't figure this out. I'm trying to make an integer in a table increase by 1 when someone clicks on a certain link.Also, I heard something about auto_increment. Can I use this to do it and if so, what is the syntax?

View Replies !

Increase Max_user_connections
According to file: my.cnf I have below lines:

set-variable = max_connections=500
max_user_connections = 40

Is there a possiblity to make this 40 to 400 connections for a specific user? Because I am a bit worried about what if one of my article get in the digg's front page.

View Replies !

Increase Values
Is it possible to increase a value in an INT field without having to SELECT the row, process the result to extract the value (in this case with PHP), increase it and then UPDATE the row with the new value?
I would be looking for something like:

UPDATE `table` SET `int`=INCREASE(1) WHERE `id`="2"

View Replies !

Increase Value In Record Set
I guess this is a newbie question I hope someone can help with. I run a gaming site where people play games and at the end of the game, their score determines their position which is stored in a mysql database. Every game can have 1,000's of players and what I would like to do is determine their ranking like this:

"select * from Players order by GameScore DESC" (Highest score wins)

and then (and that's the tricky bit)

Store their ranking in the field Ranking for the selected records without having to loop through all of them. Something like:

"update Players set Ranking = ('one more then the previous player') order by GameScore DESC"

Is that possible or is the only way to loop through these 1'000's of records one by one.

View Replies !

Query Time
Is there a function out there to determine the length of time a particular query took

View Replies !

Time Query - Please Help?
Iâ€™m completely baffled by a query that I thought I had working yesterday, but I canâ€™t get it working today.

Hereâ€™s the screnario:

Iâ€™m publishing a story to the web and I donâ€™t wonâ€™t it to be published live until:

-The current date (type: date) is less or equal to now
-The current time (type: time) is less or equal to now

So hereâ€™s my query:

select * from cms_stories
WHERE section = 'news'
AND published_web_date <= NOW() OR published_web_date IS NULL
AND (published_web_time <= NOW() OR published_web_time IS NULL)
ORDER BY story_id
DESC LIMIT 1
Now the query works for the published_web_date, but not for the published_web_time. It seems to ignore that as you can see from the screenshot returned below from that query.

View Replies !

Find Users With Similar Tastes / Select Count Of Subquery & Maintain Column Assignmts
The ultimate goal of the query:
List users by similarity in taste to user 1 based on the similarity of their favorite sites.

Setup
table users:
id, etc.

table sites:
id, etc.

table favorites:
user_id, site_id

Users add sites to their favorites list, a row is inserted into the favorites table associating users and sites.

Criteria for "similarity of taste":
%similarity = (number of intersecting favorites) / (number of unique favorites between them)

My attempt:

SELECT COUNT(*) / (SELECT COUNT(*) FROM
(SELECT DISTINCT id FROM favorites WHERE favorites.user_id = u2.id OR favorites.user_id = 1) as unique_favs)
as p_match,
u2.*
FROM favorites as f1
JOIN favorites as f2 ON f2.site_id = f1.site_id AND f2.user_id != 1
JOIN users as u2 ON u2.id = f2.user_id
WHERE f1.user_id = 1
GROUP BY u2.id
ORDER BY p_match DESC
LIMIT 30
The error:
Unknown column 'u2.id' in 'where clause'

Apparently column associations are "forgotten" when doing a derived table subquery.

Any ways I can fix this? Or any preferred methods of achieving the same result?

View Replies !

How Do I Increase A Cost By A Percentage?
currently training on SQL - doing alright so far until this sub-question...

Migrate all data from the JOB_COST table into the TOTAL_COST table. For those records that match the COST_ID, update the UPPER_LEVEL and increase the cost by 15%, otherwise insert the records.

View Replies !

Cannot Increase MYSQL Ram Usage
Using xampp-win32-1.6.8, which uses WinMySQL 1.4, phpMyAdmin - 2.11.9.2, and MySQL client version: 5.0.67. Pentium4, Windows XP Pro, and 3GB of RAM.

Anyways, I'm trying to increase the amount of RAM being used by the database. When watching the Task Manager, task mysqld-nt.exe tops out around 40M.

First: The database resides in phpMyAdmin, am I supposed to edit the variables in phpMyAdmin or WinMySQLAdmin?

Second: I've edited the my.ini file to:

Code:

#This File was made using the WinMySQLAdmin 1.4 Tool
#6/17/2008 3:10:20 PM

#Uncomment or Add only the keys that you know how works.
#Read the MySQL Manual for instructions

[mysqld]
basedir=c:/xampp/mysql
#bind-address=10.40.18.107
datadir=c:/xampp/mysql/data
#language=c:/xampp/mysql/share/your language directory
#slow query log#=
#tmpdir#=
#port=3306
key_buffer_size = 2000M
read_buffer_size=128M
query-cache-type = 1
query-cache-size = 512M

Making these Modifications have not yielded any results that are desired.

And Third: Looking at the key_buffer_size in the phpMyAdmin:

Code:

SHOW VARIABLES LIKE 'key_buffer_size%'

Variable_name Value
key_buffer_size 16777216

View Replies !

How To Increase Group_concat_max_len In Linux..?
I tried to increase my MYSQL group_concat_max_len in linux machine, but for the same i customized the 'my.cnf' file in windows and increased the max_allowed_packet size and group_concat_max_len size it works fine.
But for the same i tried to do in linux machine, but the changes i made is not working, even after increasing the size it shows the default size of 1024.
Could you please locate me which file will mysql look for in linux machine for the server settings.

for group_concat_max_len and max_allowed_packet size...

View Replies !

Increase Numeric Field
im wondering i need to inset into a field a increse number but only if another field is NOT LIKE OF something.
so i was thinking is there an way to create a table like:

id int auto inc primary
user
type_of_user
code_id

the code_id will be incremented only if type_of_user is not like no

and it will read the last position gave and increse it there a way to make it from the table or do i need to make it by hand.

View Replies !

Increase Maximum Integer Value
I'm making an online MMORPG and it seems that there is a maximum numerical value allowed in number fields of "4,294,967,295" Is there any way to remove this?

View Replies !

Inserts With Auto Increase
I have a problem with inserting into more then one table.

Ive got 3 Tables:

T1:
id (primery key with autoincrease )
Data...int

T2:
id (primery key with autoincrease )
OtherData...int

T3:
id (primery key with autoincrease )
T1_id...is connceted by a key with the id of T1
T2_id...is connceted by a key with the id of T2
some other Data

Now I want to write a UpdateScript that inserts:
One Row into T1, One Row into T2 and finaly:
One Row with the new ids from T1 and T2 into T3

View Replies !

Limiting Query Time
Is it possible to limit the query time in MySQL (3.x or 4.0)? For
example, I'd like to have any query that takes more than a specified
number of seconds just quit automatically. Seems dumb, but on a web
site, nobody is going to wait minutes for a query to return so they
refresh anyway. So on a busy server, MySQL ends up with several queries
running that all take a long time to finish which compound to make it
even slower. A simple time limit would solve the problem. Yes, I know
that the queries should take less time, but again, on a busy server,
sometimes the longer queries do take a long time (10 minutes or more)
to complete.

View Replies !

Query Execution Time
I m using inner join where there is no keys (Primary and foreign). I want to know that Does key affects execution times?

View Replies !

Add Time Using A Select Query
Hello, how can I add, say, 2 hrs from a time in a database using a select query. I have searched the forums but cannot find an answer. Is it possible PHP Code:

select
date,
`time` as timetime
, time_format(`time','%l:%i %p') as Printtime,
client,
address
from..........

View Replies !

Exceeded Run Time Query
I made a application in PHP, I have a table "control1" and this table have 85000 registries and Size is 200 MB, so when I try do a query in PHP, I have a error "exceeded run time", I changed the time but is the same, and after I connected by console, and I could see that the query take 14 minutes.

Here my sql:

$sql_filtro="SELECT COUNT(*) nFilas FROM control1 WHERE MATCH (contenido) AGAINST ('$q')";

View Replies !

How To Get Time Execution Of A Query?
Do you know how to get the time that a query executes? Is there a formula on how to get it?

Example:

Note: I have 5000 data in the table cars

$result = mysql_query("Select * from cars");

Question: How to get time of executing the query above?

View Replies !

How To Get Query Execution Time
How to get query execution time in "mysqlquery.log" files

I am using:

Linux 7.3
mysql 4.1

How to display the query execution time for each and every query in log files.
i have configured "slow-log-query" and "mysqlquery.log" in "my.cnf" is pasted below.

log = /var/lib/mysql/mysqlquery.log
log-slow-queries = /var/lib/mysql/slowquery.log
long-query-time = 0
slow-launch-time = 1

then i can get a output in "mysqlquery.log" like,

070830 9:24:29 2 Connect root@localhost on
2 Init DB jbdatabase
2 Query select count(*) from vacancy1_table
2 Query select category,listcategory from category_t
able order by category
2 Quit

but i need to display the "timetaken of each end every executed query" along with the query in the above logfile like,

E.g:select category,listcategory from category_table order by category(0.03 secs).

View Replies !

How To Get A Query Execution Time?
How to get a query execution time?

View Replies !

Execute Time Of A Query
I'm running a SELECT * query on a table with over 3,000 rows. I need to know the execute time on the query.

PHPMyAdmin shows it to me, but because they automatically add a LIMIT 0, 30 I suspect the time is only for those 30 records. It also has a feature to prevent web server timeouts that prevents me from setting the LIMIT to 0, 3100.

BTW, I'm programming in PHP. Does the time to run the query get automatically passed when PHP sends the query to MySQL?

<? PHP
$Query = "select * from my_table where 1";
$Result = MYSQL_QUERY($Query);
?>

View Replies !

Last Query Execution Time
Is there a way to retreive the elapsed time for the prevously executed query?

Alternatively, Is there a way to query the current time in fractions of a second?

I am attempting to use a stored procedure to execute and track the time it takes to run some queries and other commands.

The logic of the stored proc would go something like this.....

View Replies !

Using Time Functions Within A Query
I'm currently working on a script that searches through a database of restauarant information. One of the things it does is allow the user to search only for restaurants that are open at the time of the search, however i get errors when trying to implement this.

Here is the query im using:

View Replies !