Mysql Running Slow On Mandrake Linux 10.0 For AMD 64
I'm having a problem with a new machine running Mysql version 4.0.18
on the AMD64 version of Mandrake 10.0. The new machine has got 64bit
AMD processor and 2GB of RAM.
Nearly all queries(updates are especially slow) are running 20/30 or
more times slower than on an inferior(32 bit processor, 1.5GB RAM)
machine runnning Mysql 3.23.56 on mandrake 9.0.
As far as I can tell mysql is configured correctly for the power of
the machine. The my.cnf file looks like this: Code:
View Complete Forum Thread with Replies
Related Forum Messages:
Jabber On MYSQL + Linux Mandrake 10.0
I'm having problems runnig this command. string is below: I have installed a Jabber Server on my Linux Machine,...and everything is working fine except when I get to this portion. I have to add this command to create my Jabber database, so this is what I have. Welcome to the MySQL monitor. Commands end with ; or g. Your MySQL connection id is 19 to server version: 4.0.20 mysql> GRANT all on jabberd2.* to jabberd2@localhost INDENTIFIED by passwordgoeshere; ERROR 1064: You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near 'INDENTIFIED by' at line 1 mysql>
View Replies !
MySQL Running Very Slow
I have the following INSERT SQL, which runs very slow (For 2 full days it had not done anything) on a 2 processor Compaq machine running Suse Linux. Code:
View Replies !
Slow Running MySQL?
I'm hoping someone may have an idea what could be causing the slow loading pages of my web-site. I'm not positive, but I'm relatively sure that it's related to a problem with MySQL database. I purchased a program called Sam3 for broadcasting our radio signal over the internet. The software requires the use of MySql in order to set up web pages for our web site. The problem is, that while everything works GREAT (requests can be made from the site, songs can be searched, the history of what we've played shows up) the pages load PAINFULLY slow. Other users of this software have had no such problems so I'm at a loss. I know from testing that the PHP script for the web pages is fine, I have plenty of bandwith both upload and download available on my DSL line, and while the computer running MySQL is behind a router I have tried plugging the DSL line DIRECTLY into the host computer and it makes no difference. For all appearances it seems the problem is that it takes MySQL forever to gather and provide the information needed for these pages. Does anyone have any idea what I should be looking at to solve this problem? I do not know the MySQL program at all, so I get somewhat lost when people start throwing out technical terms, but this has been really frustrating because no one else seems to have the problem and everyone so far has just told me to check the things I've already checked.
View Replies !
MySQL Running In Linux With Apache2
I have Fedora Linux running on my box. I have installed Apache2, PHP, MySQL. I used YUM to install everything. yum install httpd yum install php yum install mysql-server mysql yum instal php-mysql What I want to know is that how can I start playing around with all this cool programs. I want to learn as much about all these awesome programs. I would like to install some kind of control center for MySQL. I heard MyPHPadmin is good. But how do I install it? Can I do it through yum? Where can I find a good newbie guide? thanks in advance :-) Fedora Project Information is Power! I am doing this for the love of MySQL.
View Replies !
How Do I Create A Database On Linux Machine Running Mysql?
I have an sql script file that is supposed to create a set of database tables for me. Supposedly I type the following on my linux box and its all supposed to work... mysql (ENTER) . mysql_dump.sql.txt When I type myslq <ENTER> I get a command prompt that looks like this... mysql> But I don't know how to change directories from that command prompt to the directory where mysql_dump.sql.txt is located. Can someone tell me how to change dirs at the mysql> prompt?
View Replies !
Slow Connect Linux To Windows MySql
I have a Linux box with the latest MySql and another box (Windows 2003 Server) with the latest Mysql. From the unix prompt I do this: mysql -uroot -pmypass -h windowsserver mydbname this take about 4 seconds to connect I do the exact same thing on a windows workstation and its connected instantly.
View Replies !
User Admin In Mysql-administrator Slow On Linux
We have a MySQL 5.0.16 server installed on a RedHat 8.0 machine. mysql-administrator v1.0.22 is installed on RH Linux FC3 from the mysql-administrator-1.0.22a-1.rh9.i386.rpm. Everything seems to run fine except User Administration is *extremely* slow. If I click on "User Administration" in the sidebar, it takes about 2 minutes (seems like forever) before the window comes back with the infomation. All the other functions seem to function fine. Is it because I'm using mysql-administrator on a remote host? Do I need to move and rebuild the server to a newer Linux version? mysqlcc doesn't have this problem at all. (It's using the libraries from MySQL 4.1 that the databases were migrated to.)
View Replies !
How To Use A Copy Of A MYSQL 4.1 Database In MYSQL 5 Running On Ubuntu Linux
We had a "permanent world" game server running on an older PC, under Ubuntu 5.10, using a MYSQL 4.1 database to store persistent data for the players, then the hard disk quit. We did back up our data on a regular basis, but didn't use MYSQL to do the backups, we simply copied the MYSQL/data/ folder to disk. So now we have a new hard disk, with Ubuntu 7.10 and MYSQL 5 installed. We have everything working, in that we have created the appropriate database and, using a simple test module of our game which will create some of the tables if they don't exist in the database, we can store and retrieve data from the database tables. The problem we have is how in the world do we get the data from the backup copy of the MYSQL 4.1 created database into the new MYSQL 5 database correctly? With 4.1 we could copy the contents of the database folder right into the database folder in the /var/lib/MYSQL/ folder, but this procedure didn't work with MYSQL 5. The files seemed to copy, as in the copy operation gave no errors, but we get an error that says the database is unavailable and to make sure the MYSQL server is running - it is, so we're stumped, and our game server is offline.
View Replies !
Running 4.1 And 5.0 On Linux
Question: How can I run 4.1 and 5.0 simultaneously on linux - Suse 9.3 in particular? My goal is to do no harm to my current 4.1 setup. Can the 4.1 and 5.0 rpm's play nice together? Can I use the rcmysql commands for running multiple versions?
View Replies !
System Suddenly Running Slow
I have been running mysql server 4.0.14 standard on a Dual Zeon 2.8GHz machine with 2GB RAM and linux redhat 9 for about two years, then all of a sudden it has started to run at a crawl. The database contains 26 million rows but 19 million are in a table the is very rarely used but occasionally needs to be accessed reasonably quickly (but performance isn't an issue). Approx 5 million rows are in another table this is used daily. The next biggest table is 444,000 rows. Is there a likely reason for the sudden slow down, can i do anything about it as it is operationally critical that i fix this quickly.
View Replies !
Running A Sql Batch Script From The Linux Command
s this possible? I want to write a command script which i want to put into a cron job which will download a db backup from cpanel. then i want to unzip it, and run the sql file, so keeping the database on the mirror machine up to date. So what i have is: #get the database wget -v --http-user user --http-pass pass https://www.site.com/path/to/cpanel/backup #move to backups folder date=`date -I` mv -fv ./mysqldump.gz /home/user/dbbackup/$date.gz now what i also want to do is: mysql -uuser -ppassword u database set foreign_key_checks = 0; . mysqldumpfile.sql set foreign_key_checks =1; exit is it possible to do that last bit from the command-line? as far as i know, a shell script can't run commands to mysql?
View Replies !
Running MySQL
I have installed mysql-3.23.54-win and it all seems to have gone OK .... now i want to run it and setup a database. I dont have an icon on the desktop and there is nothing in Start - Programs ..... start it from DOS prompt via C:> C:mysqlinmysql.exe and i get error 2003 cant connect to MySQL server on localhost <10061>
View Replies !
Running MySQL 5.0
I've just downloaded and installed 5.0 on my Pc/ win 98se. When I run the program MySQL Command Line Client, it appears to run for a second then disappears. I see the program flash open for a second and then it is gone.Complete newb needs some help.
View Replies !
MySQL 4.1 Running
I've been running mysql 4.1 for sometime and using phpMyAdmin (v2.6.2) to administer the databases. Using php scripts I can also update/insert etc the databases (maintained on my laptop Mac OS X Tiger). Suddenly, I can't get phpMyAdmin to load in the browser. I've also tried other MySQL GUI tools like CocoaMySQL and Navicat....they won't run either. I downloaded and installed phpMyAdmin 2.6.3-pl1 as well but no improvement. Why would mysql run but the admin apps not work?
View Replies !
Running MySQL From A CD-ROM?
I have used PHP and MySQL for a few years now. Just today I can across an application that had a MySQL database running locally off a CD ROM. I did not know this was posible. When the application runs it starts up the MySQL database without the user even knowing they are running it. It is pretty amazing. So I want to do the same thing. Is there any documentation on how to run MySQL locally. I would like to know how to build the database and create tables under these curcumstances.
View Replies !
Could Not Get MySQL Running
I went to MS-DOS to start the MySQL application by typing mysqld into the bin directory of where I installed MySQL but once I did typed the command and pressed enter this is all I got : A moment passed before I am shown the path of bin with no indication of MySQL server started. And also I have installed this as a window service.
View Replies !
Help Please Running Mysql On Os X
I am very new to mysql. I am using the sitepoint book 'Build your own Database Driven Website using PHP and MYSQL. I have installed mysql mysql-5.0.41-osx10.3-powerpc. Under preferences/mysql it indicates that the mysql server is running. When I try to access mysql through the terminal window I get a message - command not found. Or no permissions. I can go to the bin directory and list the contents - they seem to be there. I can't get past page 21/22 Post-installation setup tasks. I am also new to using the terminal window. I suspect I have missed something really basic - any suggestions on how I can get up and running would be much appreciated!
View Replies !
Running MySQL In RAMDisk
Have a very large database and due to performance requirements it seems that running MySQL in RAMDisk might be a good solution. Access to the database is through PHP.
View Replies !
Running MySQL Win32
I'm an absolute beginner and would really like to read something in the manual to solve this problem, but the manual just take care of Unix and Linux users. Because we develop on NT we wanted to install MySQL with Apache and PHP3 on a NT workstation for faster testing beside our Linux station. But I have problem to start the program (mysql.exe). It just gives back an error: Error 2003: can't connect to MySQL server on localhost 10061 Network is running, I can ping localhost. I don't know what to do to get it running.
View Replies !
Running Backup For Mysql
Can anyone suggest a reliable and inexpensive backup service for mysql? I have about 50 tables, of which I've been doing database backups daily on the server, then downloading the backup every couple days or so. The backup files are starting to get relatively large, and I'd like to find a service to backup to off site.
View Replies !
Running Mysql From Shell
I need to run this sort of querys from shell: delete from 3dinformatica where preco = " " ; CREATE TABLE tudotest AS SELECT DISTINCT * FROM 3dinformatica; DELETE FROM 3dinformatica; INSERT INTO 3dinformatica (cr_datetime,produto,vendedor,preco,link) SELECT DISTINCT cr_datetime,produto,vendedor,preco,link FROM tudotest; DROP TABLE tudotest; i wanted to put the mysql cmd in a file like mysql.sh and run it from crontab. i have about 100 querys like that i need to run at the same time.
View Replies !
MySQL Config Not Running
i'm trying to set up MySQL with IIS 7.0 on Windows Vista Home Premium. After you install MySQL, there's a check box to launch the config app. if i leave it checked, the app does not load. if i try to run the app by double-clicking its icon it gives me an error saying, "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail." I cannot find the application event log, though.
View Replies !
Running Mysql On Old Computers
I´m running mysql on a Pentium 166 Mhz with 16 Mb of RAM. Pretty old, right? I want to know if there is a way to improve performance. I don´t know, something about reducing the number of queries that it will respond or cutting out some features.
View Replies !
On What Port Is MySQL Running?
I'm running MySQL on my Mac, and I'm trying to figure out on what port MySQL is running. What can I type into Unix terminal to figure this out? Or can I find out some other way?
View Replies !
Running MySQL Using A Dos Batch File
I am used to use MySQL on Unix, now I have to do some development for MySQL running on Windows machine. The following script works well in Unix but I am unable to run it on Windows. "MY_FLAG" is the one which is causing issue. Due to certain restriction in my framework, I can use the normal batch by supplying the .sql file while opening the mysql connection ( infact i need to run multiple source files) Code:
View Replies !
Error Running MySQL Administrator On RH8
I have downloaded the latest version of mysql administrator 1.0.18. I followed the installation instructions, but when i am unable to run the program. I get an error saying: ./mysql-administrator-bin: relocation error: ./mysql-administrator-bin: undefined symbol: gdk_display_get_type Do you have any clue about what is happening?
View Replies !
How To Verify If MySQL Is Running On My Windows XP?
I uninstalled that and reinstalled that. Then it doesn't work anymore... I check the process of the "Windows Task Manager", but I couldn't find the fimilar mysql-nt.exe... Do you have any idea how should I fix this problem? Should I reinstall the whole XP system?
View Replies !
MySQL Administrator GUI Running Slowly... WHY?
We have created an instance or schema that contains over 14000 tables. It is a lot of tables. When we attempt to browse the tables in the GUI it literally takes 5 minutes or more for it to come back. Granted when using the Microsoft SQL Server Management Studio it is slow but doesn't take that long. After about a minute or so it gives the list and is kind of slow to scroll. Can this be fixed by optimizing the database? Is this just too many tables for mySQL to handle?
View Replies !
Running Mysql Code Within A Php File?
I have been given a some mysql code that I have to run within a website - I am familiar with mysql in terms of insert info and querying a database but I at a loss as to how to make this work. the mysql code works in mysqladmin, but how do I call it into my php code? BTW the mysql code creates a new record in the database ....... Also, I need to tweak the code so it runs in a loop for different variables - in php I would run a FOREACH query, how do I do it in mysql?
View Replies !
Detecting If MySQL Server Is Running
I write an application which saves/loads data to/from database. I created a table and I'm reading an informations from it. The problem is when server is stopped and my application tries to connect to database it terminates. I think it shouldn't happen. I want my application not to terminate while it can't to connect but give me some kind of error and continue its run. How can I do that? And at the end I would like to say that I'm writing my program in c++ using .net. My piece of code: ....
View Replies !
MySQL + SQL Server 2000 Both Running On XP Pro?
I've had mysql on my machine plenty of times with no trouble currently i have SQL Server 2000 Trial running but never both at once. Unfortunately i have to have them both on at the moment. So before i install and mess everything up, Does anyone here have this setup? I basically want to get php/mySQL/MSSQL running with IIS
View Replies !
MYSQL Running Query On Data Through Php...
I am trying to take address info from 5 different fields in mysql, concatenate them into one string of text and have then run through a POST, like you would in a form, and have them spit out on the other end into the database the Lat and Lon of the address... I can do it manually, but I would like to do it automatically... I would like to know if I am going at this right... Psuedo QUERY=SELECT addressNumber, addressStreet, city, state, zip FROM table $addressStr=addressNumber + " " + addressStreet + ", " + city + ", " + state RUN IT THROUGH A POST SOMEHOW??? and call GEOCODER from my manual insert script... $sql=INSERT INTO table SET lat='$lat', lon='$lon'
View Replies !
MySQL V4.0 -> Red Hat Linux 9
I'm having great problems trying to install the latest MySQl RPM package onto my Red Hat Linux OS. There is already MySQL v 3.0 pre-installed with the RH Linux distribution disk but I can not seem to get any of the functions working on it. So I have now dopwnloaded the latest version hoping that this will fix the error. I have managed to install the MySQL-shared-compat-4.0.1-0.i386.rpm but i'm getting the following error message when I install MySQL-server-4.0.1-0.i386.rpm : Code:
View Replies !
Mysql On Linux
I am interested in connecting to my MySql database that is running (default install) on FC4. I want to connect to the db with my Windoze machine using MySql Query Browser. Both machines are behind a router; the gateway is 192.168.0.1. The Linux ip address is 192.168.0.50 and the windows is 192.168.0.11 (both static). I guess I need to learn how to determine the mysql host and port when connecting. I thought it would just be 192.168.0.50 and 3306 respectively, it's not working.
View Replies !
MySQL And Linux
I am pretty new to the MySQL/Linux worlds. Each time I want to use MySQL, I have to start the program under the root account. Are users other than "root" allowed to access the program? If so, how is it done? It would be nice if I didn't have to continuously log into root every time I would like to use MySQL.
View Replies !
Mysql In Linux
I have installed MySQl in linux and its working properly. I wrote an c++ program to connect to mysql database, which is capable of retrieving, deleting the values from database table. The problem i am facing is i am unable to insert values into the table at runtime. Can anyone please help me as to how to write the query?
View Replies !
Slow MySQL
mySQL has been running very slowly and I am getting errors. First I did 2 things I raised the ServerLimit number (apache) to allow for more connections, I also raised the max conncetions in my.cnf. I do not know if this took effect? That should have worked. But basically in phpmyadmin i get this error frequently. I am getting more traffic so I think it is that. MySQL said: Documentation #2002 - The server is not responding (or the local MySQL server's socket is not correctly configured)
View Replies !
Why Does MySQL So Slow
I just changed to use MySQL few days ago but it was a bad idea. My server now is running very slowly with the database. I'm using Perl5 and DBD::Mysql in my script. The system is Linux9, Apache2. I looked at these mysql pid and saw a lot of activities (about 400) while there are more 100 users online at this moment and lots of running under a the same pid number.
View Replies !
MySQL Slow
I had downloaded a few years back mySQL v3.51 installed but never used it. Now I wanted to convert some B-TREE databases to mySQL and did some testing via ODBC to insert 70,000 records: My results: MS ACCESS: ~60,000 msecs MYSQL v3.51 ~18,000 msecs Impressed with the speed, I went ahead and got the latest MySQL v5.1. Uninstalled the older version, I had nothing there to preserve, so I did a simple new install with MySQL v5.1. I noticed the size of the files and BINEXE increasted by 1,000,000%. Ok, Bulky. Not a problem. I reran the same ODBC test, and now I got: MYSQL v5.1: ~450,000 msecs or 7.5 freaking MINUTES! What the hell happen? Nothing was done. I'm knew to MYSQL. I just installed it with all the defaults. I did choose "developer's machine" for the "optimizer wizard" I can't redistribute MYSQL v3.51 and force it down people's throats! I have to use what they are using already, if already installed. Not even my current system takes 1 minute to add 70,000 records. Why 7.5 minutes? All it is simple inserts/free statements.
View Replies !
MySQL Slow Log
I have the long query time set to 15 yet MySQL is still showing results with a query time of 0 in the slow query log. It says enter time in "seconds" in the MySQL Administrator but did it mean in milliseconds??
View Replies !
How To Determine Which Port MySQL Is Running On (LocalHost)?
I tried running "mysqladmin variables -u root -p" and seeing what it lists, the only things that seemed relevant are: | hostname | MyComputer (valid machine name) | named_pipe | ON | port | 0 | report_port | 3306 | report_user | Is there anything else I should get? Is there anyway to confirm which MY.INI it is loading? Why is PORT 0? And what is REPORT_PORT? When I start the MySQL database and check the DataMachineName.err file I see the following: 090327 22:06:45 InnoDB: Started; log sequence number 0 46409 090327 22:06:45 [Note] Event Scheduler: Loaded 0 events 090327 22:06:45 [Note] H:DevelMySQLMySQL Server 5.1inmysqld: ready for connections. Version: '5.1.32-community' socket: '' port: 0 MySQL Community Server (GPL) I assume this means it is running on PORT 0? How does that make any sense? Some of the things I've already tired (maybe it will help you guys figure out what my next step should be): C:>telnet localhost 3306 Connecting To localhost...Could not open connection to the host, on port 3306: Connect failed C:>telnet localhost 0 Connecting To localhost...Could not open connection to the host, on port 0: Connect failed MySQL runs fine from the command line And the User is "root" with password "pass" Service is running (started it manually - and console application works) mysqladmin.exe -u root -p ping Enter password: ** mysqld is alive I added BINMySQLd.exe to the firewall options @ opened port 3306 on the Firewall - didn't touch my router (using localhost - I imagine I don't need to go that far). Running it in PHP5 always gives me the following error: $this->connection_id = @mysql_connect('localhost', 'root', 'pass'); >> Can't connect to MySQL server on 'localhost' (10061)
View Replies !
|
TRACKER
