Replication Slave Error
030710 22:36:43 Slave: connected to master 'repl@217.58.xxx.yyy:3306',
replication started in log 'webserver-bin.054' at position 73
030710 22:38:53 Error reading packet from server: (server_errno=0)
030710 22:38:53 Slave thread killed while reading event
030710 22:38:53 Slave thread exiting, replication stopped in log 'webserver-bin.054' at position 1120
030710 22:38:58 Slave: connected to master 'repl@217.58.xxx.yyy:3306',
replication started in log 'webserver-bin.054' at position 1120
I've tried to do also
Reset master
On the master before lock tables without result.
View Complete Forum Thread with Replies
Related Forum Messages:
Master/slave Replication Error
I have set up master/slave replication between 2 servers (1 master, 1 slave). However, when I change a table on the master (e.g. by inserting a row), the same table on the slave is not updated. The strange thing is that if I enter SHOW SLAVE STATUS on the client, it gives me the same offset in the binary log on the master as the master gives when issuing SHOW MASTER STATUS (both entered after the update). Code:
View Replies !
Master Slave Replication Working But Slave Log Name Stuck?
I have been checking SHOW SLAVE STATUS; and keeping an eye on it. It lags but seems to be still going. However. Today I notice that the Master_Log_File changed from domain-bin.000001 to domain-bin.000002 and the Read_Master_Log_Pos from a really high 6 dig number to a low number, but the Relay_Log_File didnt change. it still says slavedomain-relay-bin.000001 and a really large growing number for: Relay_Log_Pos
View Replies !
Replication :: Slave Thread: Error Connecting To Master: Access Denied For User
I have MySQL 3.23.41 on a RH-7.2 Linux used as local server. I'm trying to replicate the databases from server (192.168.0.1) to another linux PC (192.168.0.3). Following the manual, i grant to the master a user with file privileges, and edit both my.cnf files. The master starts fine but the slave mysql.log shows up an error: Slave thread: error connecting to master: Access denied for user: replica@localhost' (Using password: YES) (0), retry in 60 sec
View Replies !
Replication, Slave Thread: Error Connecting To Master: Access Denied For User:
I have MySQL 3.23.41 on a RH-7.2 Linux used as local server. I'm trying to replicate the databases from server (192.168.0.1) to another linux PC (192.168.0.3). Following the manual, i grant to the master a user with file privileges, and edit both my.cnf files. The master starts fine but the slave mysql.log shows up an error: Slave thread: error connecting to master: Access denied for user: replica@localhost' (Using password: YES) (0), retry in 60 sec
View Replies !
Can't Set-up Slave In Replication
I'm trying to set-up replication following a book and on-line guide. This is over SSH with a tunnel (not sure if the tunnel's required). The master appears to be set-up OK (easy enough). The slave however isn't behaving. I've got a my.cnf with the following: [mysqld] master-host=127.0.0.1 master-port=APORT master-user=AUSER master-password=APASSWORD server-id=2 When I start the slave up and do show slave status - I get 0's and blank entries back. I've tried setting it up using: CHANGE MASTER TO MASTER_HOST='localhost', MASTER_USER='AUSER', MASTER_PORT=APORT, MASTER_PASSWORD='APASSWORD', MASTER_LOG_FILE='AFILE-bin.001', MASTER_CONNECT_RETRY=10; This sets up the slave bits and show slave status looks much better, however, SLAVE START; returns... The server is not configured as slave, fix in config file or with CHANGE MASTER TO I can only seem to find this message in pages that have a list of all Mysql errors.
View Replies !
NOW() At Replication Slave
We have 3 MySQL servers in replication, 1 master and 2 slaves. One slave server is 300 seconds behind the master due to heavy SELECT statements. If I run INSERT query (containing NOW()) on master at 10:00 AM, what time will be saved in the slave server which is 300 seconds behind? The query is MySQL Code: INSERT INTO users (username, password, signup_date_time) VALUES ('user1', 'pass1', NOW())
View Replies !
Replication From Master To Slave
I'm having quite a fuss with my two MySQL DB servers lately. I'm trying to establish replication between a MySQL 4.0.20 server (master) and a MySQL 4.1.11 server (slave). From what I read, replication from a 4.0.x server -> 4.1.x server will work, just not the other way around. However, that's not really my problem. After unsuccessfully completing the configuration myself, I used ....
View Replies !
Replication: 2 Masters And 1 Slave
I need to replicate 2 databases (each one resides in a different server) to a single slave server. Reading the documentation I have running the master/slave replication, but i need to replicate the other database too, the problem is: I need replicate the other database and that database exists in the other server, so how I configure the other master server/datatabase in the slave?
View Replies !
Master Slave Replication
I am setting up a Master/Slave system so that the data will always be backup up safely when any changes are done. Now - I am not sure to what extent the replication extends to. I know it is fine for Data but what about these scenario's 1. Master table structure changes - are these replicated 2. Trigger/Stored Procedure added or changes - are these replicated 3. View or exisiting view creates/modified - are these replicated.
View Replies !
Replication Is Stopped On Slave
using replication on mysql-4.1(Master) to mysql-4.1(Slave). Suppose Master DB inserting queries in binary log file at master-bin.01 at position 100. And on slave somehow replication is stopped. mysql-slave> show slave statusG Master_Host: master-ip-address Master_Log_File: master-bin.01 Relay_Log_File: slave-relay.01 Slave_IO_Running: No Slave_SQL_Running: No Read_Master_Log_Pos: 100 Exec_Master__Log_Pos: 50 After fixing slave problem when i run following command mysql> START SLAVE; starts Slave IO_THREAD and Slave SQL_THREAD. Because slave io_thread started that's why new relay log file created slave-relay.02 and slave io_thread resumes to log queries after position 100 (Read_Master_Log_Pos: 100) to new relay file slave-relay.02 file like position 101,102 .... onwards.
View Replies !
Replication Database On Slave Is Not Updated
We are using mysql v4.0.24 on Linux machines. I'm trying to set up replication with a master and only one slave database. The syncronization seems to work well, the relay file on slave is wrote correctly (Read_Master_Log_Pos and Relay_Log_Pos are updated) but the information on slave database is not updated. Master and slave are sincronyzed as shown below but for some reason I don't understand. I have to say thay sometimes the replication worked but sometimes setting up a new slave or changing a slave to master it does not. Code:
View Replies !
Replication Master & Slave On The Same Machine
I have set up a master and a slave according to the manual. The master runs 4.0.12 and the slave runs 4.0.14, they are both actually on the same machine (it's a long story, but it's what I need). I did LOAD DATA FROM MASTER on the slave which completed successfully, and then I tried SLAVE START: ERROR 1200: The server is not configured as slave, fix in config file or with CHANGE MASTER TO but.. it is! on the slave: Code:
View Replies !
Single Slave Replication From Three Masters
Is it possible, and what are the ramifications, of having a single slave replicate from three masters? I have six machines, three real servers with three replicating. Be nice to free up two machines and have just a single 'slave'.
View Replies !
Replication :: New Database Won't Copy To Slave?
I am confused about MySQL replication. I had someone set it up for me on my server and it works for what is already there. If I add a new database to the master db it doesn't seem to carry over to the slave. Is Replication for the entire MySQL server or is it database specific?I keep reading the manual and it looks server specific but I'm not getting new dbs over on the slave. Do I need to restart the slave?
View Replies !
Master/slave Setup To Do Replication
using mysql 4.1.7, have a master/slave setup to do replication. Is there anyway to prevent the slavedb from accepting inserts other than the replication inserts? If rows do get inserted directly into the slave, there is an error because the two databases no longer match. Is there anyway to recover from this?
View Replies !
Replication :: Switching Master And Slave On Failure
I have 2 servers, A and B. A is the primary server and master in mysql. B is the redundant server and the slave in mysql. A is replicating to B. Now A fails and B becomes the primary server (still slave in mysql?). A finally comes back up, but instead of switch primary status from B back to A, A becomes the redundant server and B stays as primary. Now, I need B to be master in mysql and A to be slave in mysql. I don't know if this can be done the way it needs to. If it can I really don't need a step by step process unless someone is really willing to give that to me. I just would like to know if this can be or has been done.
View Replies !
Replication :: Understanding Master & Slave Servers
Can anyone share their experience with replication? In particular I'm wondering how fast (or how slow?) replication occurs. Could I pull off the configuration below? For example, if a person places an order on our site, the update is sent to the master server. Can that update be replicated to the slaves before the browser is taken to a reciept page (which is queried against the slaves)?
View Replies !
Replication Error
I have a master and a slave. Replication was working fine initially but now when I do 'show slave status', I see this as the error Error no 1449 Error "There is no 'root'@'hostname' registered" on query. What would cause this error message?
View Replies !
Repeating Replication Error
I'm replicating several databases. The most active one has one table with close to five million rows, one has about half a million and the rest are pretty small. The master is version 5 on an ubuntu-5.10 box and the slave is version 5 on a FreeBSD-6.0 box. Once a day the biggest table gets an infile of several thousand lines. It always works fine. Things will be great for about a week and then I'll get an error on the slave, like today's: 060201 11:02:50 [ERROR] Key in wrong position at page 8563712 060202 10:54:25 [ERROR] /usr/local/libexec/mysqld: Table './test/test' is marked as crashed and last (automatic?) repair failed The slave process stops, I'll repair the table, restart the slave process and things will be fine for some number of days before it happens again. What's going on? The slave tables are never touched (I have learned that running OPTIMIZE TABLE... on the slave will cause trouble, so I don't touch anything on it.) Is this bad memory, or a config issue?
View Replies !
Replication Error On RedHat AS 4 ( 5.0.33)
I download the newer MySQL version 5.0.33. And i compile it for multi-threads support on my 64 bit Redhat AS 4 running on DELL 2950. Everything is fine while installation time. But error occues when another slave MySQL contact this new MySQL version master. After trying, I found out some kind of error "ONLY" happen on 64 bit RedHat AS4 and running with mult-threads MySQL. I wound not wanna downgrade my 64 RH4 AS to 32. Although "Non-Multi-thread" MySQL can well run on my 64 bit RH4 AS, multi-threads MySQL still my prefer if it can work out.
View Replies !
Replication :: Error Connecting To Master
Show master status on the master looks fine. When I start mysql on the slave, here's what I get: 071017 10:20:35 [Note] Slave SQL thread initialized, starting replication in log 'binary-log.000006' at position 3031, relay log './web1-relay-bin.000003' position: 98 071017 10:23:44 [ERROR] Slave I/O thread: error connecting to master 'replication@myotherserver': Error: 'Lost connection to MySQL server during query' errno: 2013 retry-time: 60 retries: 86400 Master my.cnf: [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock old_passwords=1 log-bin=/var/db/repl/binary-log binlog-do-db=mydatabase binlog-ignore-db=abunchofotherdatabases server-id=1 [mysql.server] user=mysql #basedir=/var/lib [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid Slave My.cnf: [mysqld]...........................
View Replies !
MySQL Slave
We are having problems where at least once a day our MySQL slave server gets about 1700 seconds behind the master.Any ideas what is causing this? I looked in .err logs and it says nothing.A simple stop/start brings it back to to 0.
View Replies !
Reconnect Slave
Is it possible to re-connect the slave db to a master after it has been out of sync for 2 days?I can't seem to figure it out and it is a pain to have to redump all the data and re-import all the data as I have over 20 different databases.
View Replies !
Slave Servers
i have do replication with 1 master server to 3 slave servers. And i want to grant the 3 slave servers only select option for all user;
View Replies !
MySQL Master/Slave
In the case of 2 3.23.X series mysql databases in a master/slave replication setup (myiasm tables), if a FLUSH TABLES WITH READ LOCK is put on the slave, does the master effectively lock too because it is waiting for the binlog update(s) to be confirmed from the slave, or does the master merrily carry on not caring in the least that the slave tables are locked?
View Replies !
Master/Slave Restoration
I have 2 servers (A and B) setup as Master and Slave respectively. Upon A's failure, all client's request will be directed to B. How can I set A to become master again after its been restored from its failure? In chapter 4.10 of mysql docs, it mentioned (vaguely) that A will become B's slave to sync all operations that had happened after the failure. Finally, upon full sync switch A to become Master again and B to slave. How can I setup A to be a slave of B? The problem I faced is that I can't find out what the bin log and position is from B since "show master status" is always empty. I guess B still thinks its a slave.
View Replies !
Flushing Writes On Slave Db
i need to make a slave database "READ" only.ie, it must not not respond to data manipulation commands. i want only "select * from table_name" command to work on the tables in the replicated db on the slave. How must i go about it?
View Replies !
Adding A Second Slave Server
I have two MySQL servers using master/master replication. I have a third MySQL server at a remote location and I would like to replicate to it in a master/slave configuration. I've tried uninstalling MySQL, removing it's data directory, reinstalling, importing a dump and setting the master's info. Once I do this, changes do not actually seem to be replicating to the standalone master. In fact, somehow the slave's position has gotten ahead of the master. I've setup replication a half dozen times in my past, what am I doing wrong?
View Replies !
Different Errors On Master And Slave.
Replication stopped on slave servers when I executed the below query, and this query failed on master. mysql> UPDATE members set col1 = 1000, col2 = 10 where type = 2; ERROR 1030 (HY000): Got error 127 from storage engine Here is the error message on when I do SHOW SLAVE STATUSG Last_Errno: 0 Last_Error: Query caused different errors on master and slave. Error on master: 'Got error %d from storage engine' (1030), Error on slave: 'no error' (0). Default database: 'subscribers'. Query: 'UPDATE members set col1 = 1000, col2 = 10 where type = 2' members table contains 1485112 rows.
View Replies !
Data Is Not Replicating To Slave
Data is not being replicated to one of my slave servers. The slave server has slave_skip_errors=off in my.cnf. Other servers are replicating data properly. On SHOW SLAVE STATUS it does not show any error and Quote: Seconds_Behind_Master: 0 After posting in the forum, I was continuously looking at SHOW SLAVE STATUS output. Once I noticed the following (bold letters) Quote: Slave_IO_State: Reconnecting after a failed master event read Master_Host: 192.168.0.61 Master_User: user Master_Port: 3306 Connect_Retry: 60 Master_Log_File: mysql-bin.000343 Read_Master_Log_Pos: 83728304 Relay_Log_File: bg5-relay-bin.000058 Relay_Log_Pos: 1336401 Relay_Master_Log_File: mysql-bin.000343 Slave_IO_Running: No Slave_SQL_Running: Yes Replicate_Do_DB: database_name Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 83728304 Relay_Log_Space: 1336401 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL
View Replies !
Masters Replicating To A Single Slave
I have two big databases in two different servers, each database it's different too and I need to replicate each one to a single mysql slave server. I need this: MasterA ---> SlaveC <-- MasterB So, I need dbA and dbB replicated on the slave server C.
View Replies !
Slave-load-tmpdir Option
I have just installed mysql server 5.0. However, when I was trying to start the server by invoking mysqld, it complained that a directory/file is not found. I then viewed the variable names and found that the slave-load-tmpdir variable was pointing to a non-existing path. I have tried mysqld --slave-load-tmpdir=<my new path> --standalone but whenever I restart the mysqld, the variable is still defaulted to that old path....what should I do to change the default setting for this variable?
View Replies !
Procedures To Promote Slave To Master Server
What is the proper procedure for promoting a Slave into a Master replication server? We want to do some fail-over testing. When we tried this in the past, the former master would not replicate. We got an error: "master and slave have equal MySQL server ids". The fail-over procedure includes renaming the slave and exchanging IP addresses with the master server. We did not change the server-ids. I haven't found any information on promoting slaves to master servers.
View Replies !
LOAD DATA INFILE :: Master & Slave
After recently replicating using the stop databases and copy innodb and mysql files method, things were fine...Until the slave thread stopped complaining about duplicate rows after one of our developers did a LOAD DATA INFILE operation on the master. Unfortunately the insert's are into a table using AUTO_INCREMENT as well and this may be compounding the problem.I have read the docs, but it's sort of unclear, does LOAD DATA INFILE work in a replicated 3.23.56-1 setup, only under certain circumstances, or not at all?
View Replies !
Forwarding Insert/Updates From Slave To Master
Is there a way within MySQL to forward all Inserts/Update requests from the Slave to the Master, or much I rearchitect my application to carry two connection; one connection to the Master for updates and the other connection to the slave for Selects?
View Replies !
LOAD DATA :: Master & Slave Server
I was doing replication using MYISAM table types. When I set up my database server on the Slave, I used to LOAD DATA FROM MASTER to get the first snapshot of my running master. This worked great. Now we moved to using InnoDB table types to get rollback/commit features and also to enforce Foreign key checks. I read that current version of InnoDB does not support LOAD DATA FROM MASTER command. I would like to be able to setup my slave without taking down the server. Is there a way to do so without buying the InnoDBHotBackup.
View Replies !
MyISAM On Master And InnoDB On Slave Server
Is this possible to have a MyISAM table on master server and change its storage engine (to InnoDB) on slave server in a replication environment? If this is possible, what should I consider before changing MyISAM to InnoDB on slave server? Here is the table structure:
View Replies !
Restart Slave After Master Has Died In Replicated Environment
Our master database ran out of connections and we had to restart the server (couldn't SSH into the box). Rebooting the server worked and of our clients resumed activity. The problem is that the slave didn't start automatically so I tried to do a START SLAVE; on it. This is the latest shown in the error log on the slave. 040110 20:06:13 Error reading packet from server: binlog truncated in the middle of event (server_errno=1236) 040110 20:06:13 Got fatal error 1236: 'binlog truncated in the middle of event' from master when reading data from binary log 040110 20:06:13 Slave I/O thread exiting, read up to log 'user1_master.002', position 802078191 (THIS IS AFTER I DID A SLAVE_START TODAY 1/20) 040120 8:56:39 Slave I/O thread: connected to master 'slave@db1.ezboard.com:5000', replication started in log 'db1_master.002' at position 802078191 040120 8:56:39 Slave: there is an unfinished transaction in the relay log (could find neither COMMIT nor ROLLBACK in the relay log); it could be that the master died while writing the transaction to its binary log. Now the slave is rolling back the transaction. Error_code: 0 040120 8:56:39 Error running query, slave SQL thread aborted. Fix the problem, and restart the slave SQL thread with "SLAVE START". We stopped at log 'db1_master.002' position 802078147.
View Replies !
Command SHOW SLAVE STATUS G, Shows That SLAVE_IO_RUNNING
I am trying to set up a master/slave replication.. I followed the instructions in the mysql manual.. I am using mysql 4.0.12 installed in windows xp... I have found out that the replication is not working ... when i make the command SHOW SLAVE STATUS G, it shows that SLAVE_IO_RUNNING : No. How can I make this run? What could have I done wrong?
View Replies !
Mysql Master/Slave Read Write To Database Question
If I setup my database as master/slave and user enters data into the html form. This data is written to the master database. After html form submission user is directed to view.html to view the submitted data. The view.html page does the read from the slave. Would it be safe to assume that the data that user submitted would be written to master and immediately displayed in the view.html by reading slave data base?
View Replies !
Replication Using Ssl
I have replication all set to go between an ubuntu Master and a FreeBSD Slave. However, no matter what I try I can't get telnetd to run on the master and the slave is not connecting (I am assuming it's using telnet). Can someone point me to a dumbed-down recipe on altering my existing my.cnf files to use SSL for the replication connection to the Master? Currently I can SSH into either machine, and from one to the other, without problems. The error is this: codd# mysql -u <a user with 'replication slave' rights> -p -h <Master hostname> Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on '<Master hostname>' (61)
View Replies !
Replication Lag
i have mysql 4.1.14 running in a master slave setup.. in a local network.. The problem i am having, that the replication status on slave show random bursts of lag.. like , in two consecutive runs of SHOW SLAVE STATUS, i get Seconds_Behind_Master: 28984, and Seconds_Behind_Master:
View Replies !
Replication
I have connect my web server (master) to my local server (slave) through dial-up and replicate 2 databases. a) Is there a log file describing the replications that happend (if any)? b) how do I know when to stop the dial-up so not to stop any data transfer through repliication?
View Replies !
|
TRACKER
