Replication :: Error Connecting To Master
Show master status on the master looks fine. When I start mysql on the slave, here's what I get:
071017 10:20:35 [Note] Slave SQL thread initialized, starting replication in log 'binary-log.000006' at position 3031, relay log './web1-relay-bin.000003' position: 98
071017 10:23:44 [ERROR] Slave I/O thread: error connecting to master 'replication@myotherserver': Error: 'Lost connection to MySQL server during query' errno: 2013 retry-time: 60 retries: 86400
Master my.cnf:
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
old_passwords=1
log-bin=/var/db/repl/binary-log
binlog-do-db=mydatabase
binlog-ignore-db=abunchofotherdatabases
server-id=1
[mysql.server]
user=mysql
#basedir=/var/lib
[mysqld_safe]
log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
Slave My.cnf:
[mysqld]...........................
View Complete Forum Thread with Replies
Related Forum Messages:
Replication :: Slave Thread: Error Connecting To Master: Access Denied For User
I have MySQL 3.23.41 on a RH-7.2 Linux used as local server. I'm trying to replicate the databases from server (192.168.0.1) to another linux PC (192.168.0.3). Following the manual, i grant to the master a user with file privileges, and edit both my.cnf files. The master starts fine but the slave mysql.log shows up an error: Slave thread: error connecting to master: Access denied for user: replica@localhost' (Using password: YES) (0), retry in 60 sec
View Replies !
Replication, Slave Thread: Error Connecting To Master: Access Denied For User:
I have MySQL 3.23.41 on a RH-7.2 Linux used as local server. I'm trying to replicate the databases from server (192.168.0.1) to another linux PC (192.168.0.3). Following the manual, i grant to the master a user with file privileges, and edit both my.cnf files. The master starts fine but the slave mysql.log shows up an error: Slave thread: error connecting to master: Access denied for user: replica@localhost' (Using password: YES) (0), retry in 60 sec
View Replies !
Master/slave Replication Error
I have set up master/slave replication between 2 servers (1 master, 1 slave). However, when I change a table on the master (e.g. by inserting a row), the same table on the slave is not updated. The strange thing is that if I enter SHOW SLAVE STATUS on the client, it gives me the same offset in the binary log on the master as the master gives when issuing SHOW MASTER STATUS (both entered after the update). Code:
View Replies !
Master Master Replication, Truncate Table Fails, Version 5.0.22
I have set up a master master replication link between two databases, prototyping an idea. Anyhow, adding records and deleting works, both get updated, creating and dropping tables works, but truncating tables doesn't work. My main questions are, why doesn't truncate work, and if it doesn't work, what else doesn't work across a master-master replication link?
View Replies !
Backing Up A Circular Master-master Replication Setup
I have a running circular master - master replication running. I want to run a mysqldump on one of the servers but am worried what the impact of running a mysqldump will be on the replication. Will the transactions generated by the mysqldump get put into the binary log file? I see the option --delete-master-logs for mysqldump and am assuming that it deletes the previously inserted log items from the binary log file. If there is someone that can please just give me a little more clarification on how the --delete-master-logs option works.
View Replies !
Master / Master Asynchronous Replication
Currently we have a web based application that is mostly reads (4:1 r/w). It is using a single MySQL database server. Is there any way to have two database servers in a master/master configuration such that writes to either database server are replicated to eachother. Basically even though we have a 4:1 ration of read/write the writes happen often enought that when the database goes down the app stops working. I know how to get this working in Oracle (insert big laugh here) but Oracle is cost prohibitive. Any pointers?
View Replies !
Master/Master Replication Problems
I was wondering whether someone could help me. I have inherited set of replicated servers from a guy I used to work with, basic set up is: Master1/Slave2 - Server ID 1 Master2/Slave1 - Server ID 2 When I looked at the logs it looks as though Server ID 2 is well out of step. Having looked at the slave status it appears that that Slave_SQL_Running state is set to No and a particular piece of SQL is causing the problem. Having ran the SQL on the particular server it has now problem at all. Now my understanding of this type of set up is that Server ID 1 writes directly to Server ID 2, then Server ID 1 is in turn replicated to. But for the life in me, I cannot understand why this piece of SQL is causing the problem. Can anyone offer me any ideas on how I can best get to the bottom of this, I'm really struggling with this. There was me thinking replication just worked! Is there an ability to get MySQL to log all queries it is running, so I can get to the bottom of all queries currently being executed?
View Replies !
Replication From Master To Slave
I'm having quite a fuss with my two MySQL DB servers lately. I'm trying to establish replication between a MySQL 4.0.20 server (master) and a MySQL 4.1.11 server (slave). From what I read, replication from a 4.0.x server -> 4.1.x server will work, just not the other way around. However, that's not really my problem. After unsuccessfully completing the configuration myself, I used ....
View Replies !
Dual-master Replication
I would like to set up a dual-master replication setup for my MySQL database (running on RedHat 9). Could someone please point me to appropriate website that details this setup process and management as well (i.e. what should I do if one of the masters goes down?). Also, are there any solutions that allow auto-increment fields in this kind of setup?
View Replies !
Replication :: Run RESET MASTER
If I run RESET MASTER on the primary MySQL server (the master) will it wait till the slaves are up to date before deleting the bin files or do you think my slaves will get screwed up?
View Replies !
Master Slave Replication
I am setting up a Master/Slave system so that the data will always be backup up safely when any changes are done. Now - I am not sure to what extent the replication extends to. I know it is fine for Data but what about these scenario's 1. Master table structure changes - are these replicated 2. Trigger/Stored Procedure added or changes - are these replicated 3. View or exisiting view creates/modified - are these replicated.
View Replies !
Replication Master & Slave On The Same Machine
I have set up a master and a slave according to the manual. The master runs 4.0.12 and the slave runs 4.0.14, they are both actually on the same machine (it's a long story, but it's what I need). I did LOAD DATA FROM MASTER on the slave which completed successfully, and then I tried SLAVE START: ERROR 1200: The server is not configured as slave, fix in config file or with CHANGE MASTER TO but.. it is! on the slave: Code:
View Replies !
Replication Master Crashed After 6 Hours
I recently setup replication, the master and slaves appears to work fine initially. After about 6 hours, the master mysqld process will start to consume 99% CPU and the load (avg. load per minute) will go to 3, 4, 6, 15, 24, 56, 312... in a matter of seconds! The master then stops responding and needs a reboot. This problem is reproducible, I have tested a few times. This is a screenshot of "top" command just before the master died: http://choonkeng.hopto.org/temp/replication-hang.gif There are plenty of memory and no disk swapping when the master goes 99%. Error and slow logs don't show any useful information.
View Replies !
Master Replication Automatic Failover
I am having one master and three slaves. If my master fails suddenly then one of my slave has to become master automatically on any platform (windows/linux). Can you please suggest the process to do this. Note: Manually i know how to do this task, but i need to be do this automatic.
View Replies !
Multi-Master Cross OS Replication
I normally run two Linux MySQL servers in multi-master replication and it has worked fine. Now I have had one of the machines die on me. The problem is that I want to now have that same replication configuration between my Linux and Windows machine which both run MySQL. The configuration on the linux machine I don't really have trouble with at all, but editing the my.ini file on windows to setup the master host causes the service to fail to start. So my question is what is the appropriate configuration of my.ini on windows to facilitate multi-master replication? Many hours of googling produced limited results/tutorials, none of which were helpful (most of which were for Linux which again I am familiar with already).
View Replies !
Muti Master Server Replication
I need some help in setting up multi master server replication setup fpr my project. Till now I have set up single master replication, but had not been able to manage anythin on mulitimaster setup.
View Replies !
Master/slave Setup To Do Replication
using mysql 4.1.7, have a master/slave setup to do replication. Is there anyway to prevent the slavedb from accepting inserts other than the replication inserts? If rows do get inserted directly into the slave, there is an error because the two databases no longer match. Is there anyway to recover from this?
View Replies !
Dual Master Replication In MySQL 4.1
I have been charged with the task of setting up dual master replication with our company's MySQL servers. I know that their are inherent auto_increment problems with this set up, and the mechanisms to fix this problem weren't introduced until version 5.0. Can anyone give me some tips, pointers, or advice for safely setting up this replication topology in 4.1? Are there any steps I can take to make sure there are no auto_increment issues? Has anyone had experience setting this up?
View Replies !
Replication With Master And Several Slaves/Masters
At the company I'm working (a road survey centre) where about to start a new project. We're planning to create web-based application with php, javascript, maybe we're going to use AJAX but certainly combined with a MySQL database to store all of the data. Since users/researchers have to be able to work off-line on a laptop. Our idea was to install, via XAMPP or something like that, the complete package (i.e. Apache, PHP, MySQL) on each laptop. On a main server we have the same but probably a Linux system. Now, I know it is possible to replicate the DB on the laptops with the main DB. But is it also possible to update/replicate the main DB with results from the/a laptop after working a day off-line? So it becomes available on each laptop after they done a replication from the main DB? Maybe a long post for a small question, but I wanted to draw the "context" in wich it is going to be used. A question you are about going to ask me probably is: "why they have to be able to work off-line?" Quite simple: Not everywhere in the world you have wireless internet access + the onsite laptops need to communicate on site with serial devices GPS, Gyroscope, and such like. Wich is for a webbased application running on a server thousand miles rather difficult...
View Replies !
Replication :: Master Log File Position Changed
I have a simple master/slave replication environment that is working smoothly with one exception. If I restart the master server the Master Log File is incremented by one (e.g. the original master log is named data-bin.000001 and the new master log is named data-bin.000002) the slave server never notices that the Master Log File and the Master Log Position have changed. Instead, the slave sits there waiting for new entries in the old Master Log File. I can tell this by executing a SHOW SLAVE STATUS on the slave server. I am not sure about this because I can't find any documentation on the proper behavior of mysql during this scenario, however, I am under the impression that slave server should be able to figure this out and continue replicating, without requiring me to execute an "CHANGE MASTER..." command on the slave server every time the master is restarted. Of course, I assume this same problem will occur when the Master Log File grows to its maximum size and a new Master Log File is created. If anybody who has experience with mysql replication could just confirm that the behavior I am seeing is not correct, that would be great. Or if anybody has any suggestions as to what, if anything, is wrong with my setup. Code:
View Replies !
Replication :: Switching Master And Slave On Failure
I have 2 servers, A and B. A is the primary server and master in mysql. B is the redundant server and the slave in mysql. A is replicating to B. Now A fails and B becomes the primary server (still slave in mysql?). A finally comes back up, but instead of switch primary status from B back to A, A becomes the redundant server and B stays as primary. Now, I need B to be master in mysql and A to be slave in mysql. I don't know if this can be done the way it needs to. If it can I really don't need a step by step process unless someone is really willing to give that to me. I just would like to know if this can be or has been done.
View Replies !
Replication :: Understanding Master & Slave Servers
Can anyone share their experience with replication? In particular I'm wondering how fast (or how slow?) replication occurs. Could I pull off the configuration below? For example, if a person places an order on our site, the update is sent to the master server. Can that update be replicated to the slaves before the browser is taken to a reciept page (which is queried against the slaves)?
View Replies !
Replication :: Show Master Status Return Empty Set
I am trying to set up replication on 2 servers. I am following the procedure on mysql.com. After you have done the grant replication and the snapshot, you have to do SHOW MASTER STATUS; and it is suppose to return informations. But for me, it returns "empty set".
View Replies !
Master Slave Replication Working But Slave Log Name Stuck?
I have been checking SHOW SLAVE STATUS; and keeping an eye on it. It lags but seems to be still going. However. Today I notice that the Master_Log_File changed from domain-bin.000001 to domain-bin.000002 and the Read_Master_Log_Pos from a really high 6 dig number to a low number, but the Relay_Log_File didnt change. it still says slavedomain-relay-bin.000001 and a really large growing number for: Relay_Log_Pos
View Replies !
Error Connecting To DB
I get an error when I try to connect to the sql database. Here's the code: $sql_connection = mysql_connect("$sql_server","$sql_username","$sql_password"); Here's the error: fatal error: Call to undefined function mysql_connect() in c:projectxxxxx If it helps, I am using PHP designer 2006 beta 4.
View Replies !
Replication Error
I have a master and a slave. Replication was working fine initially but now when I do 'show slave status', I see this as the error Error no 1449 Error "There is no 'root'@'hostname' registered" on query. What would cause this error message?
View Replies !
Error Connecting To Db Server
I have a mysql 3.5 server installed on a suse linux 8.1, with address 10.0.0.100. Now I want to access that db from a W2K pc, address 10.0.0.200. I am able to ping 10.0.0.100, but I cannot connect to the db, and get error 2013. I have tried with MySQL Administrator 1.0 and also with ODBC. The db on linux has grant all on *.* to ''@'10.0.0.%' and also tried .... to root@10.0.0.200 and others seen on posted messages. I can access that db via php applications (eg phpMyAdmin).
View Replies !
Error Connecting To MySQL
hey guys im getting this message when trying to installa classified ads script that i got? Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
View Replies !
Error Connecting To Database
i have installed Apache 2.0 and php 5.0.3 on to my machine which is Windows XP SP2. i can get these to work, the problem is when i install mysql it won't let me connect to my database. i keep getting this error: Access denied for user 'ODBC'@'localhost' (using password: NO) I have it working perfectly on Windows 2000 SP4 but cant get it to work on XP.
View Replies !
Error Connecting To Server
Warning: mysql_connect() [function.mysql-connect]: Host 'AAI-AGS-139DW.AAIGLOBAL.local' is not allowed to connect to this MySQL server in C:wampwwwfirst projectconnect_mysql.php on line 10 could not connect: Host 'AAI-AGS-139DW.AAIGLOBAL.local' is not allowed to connect to this MySQL server. what seems to be the problem here? is it my script or my server?
View Replies !
Error While Connecting To Mysql5
iam using wamp5 latest version and an error accur when i try to connect MySQL d:wampBINmysqlmysql5.0.45BINmysql this was the error: ERROR 1045 <28000>:acess denied for user 'odbc'@localhost' <using password:no>
View Replies !
Repeating Replication Error
I'm replicating several databases. The most active one has one table with close to five million rows, one has about half a million and the rest are pretty small. The master is version 5 on an ubuntu-5.10 box and the slave is version 5 on a FreeBSD-6.0 box. Once a day the biggest table gets an infile of several thousand lines. It always works fine. Things will be great for about a week and then I'll get an error on the slave, like today's: 060201 11:02:50 [ERROR] Key in wrong position at page 8563712 060202 10:54:25 [ERROR] /usr/local/libexec/mysqld: Table './test/test' is marked as crashed and last (automatic?) repair failed The slave process stops, I'll repair the table, restart the slave process and things will be fine for some number of days before it happens again. What's going on? The slave tables are never touched (I have learned that running OPTIMIZE TABLE... on the slave will cause trouble, so I don't touch anything on it.) Is this bad memory, or a config issue?
View Replies !
Replication Slave Error
030710 22:36:43 Slave: connected to master 'repl@217.58.xxx.yyy:3306', replication started in log 'webserver-bin.054' at position 73 030710 22:38:53 Error reading packet from server: (server_errno=0) 030710 22:38:53 Slave thread killed while reading event 030710 22:38:53 Slave thread exiting, replication stopped in log 'webserver-bin.054' at position 1120 030710 22:38:58 Slave: connected to master 'repl@217.58.xxx.yyy:3306', replication started in log 'webserver-bin.054' at position 1120 I've tried to do also Reset master On the master before lock tables without result.
View Replies !
Replication Error On RedHat AS 4 ( 5.0.33)
I download the newer MySQL version 5.0.33. And i compile it for multi-threads support on my 64 bit Redhat AS 4 running on DELL 2950. Everything is fine while installation time. But error occues when another slave MySQL contact this new MySQL version master. After trying, I found out some kind of error "ONLY" happen on 64 bit RedHat AS4 and running with mult-threads MySQL. I wound not wanna downgrade my 64 RH4 AS to 32. Although "Non-Multi-thread" MySQL can well run on my 64 bit RH4 AS, multi-threads MySQL still my prefer if it can work out.
View Replies !
403 Error Connecting To Database From Dreamweaver MX '04
I've been thrown somewhat unwillinging into the use of databases and MySQL, and now I'm stuck. I'm making a blog. I have an article from Adobe.com that explains most of it. Everything with MySQL, MySQL Administrator and Apache setup went OK (as far as I can tell), but when I try to set up the database connection from within Dreamweaver (under the Applications/Databases tab) I get a 403:Forbidden error when i click "test" to connect to the server. Can anyone tell me, as simply as possible (I'm a copywriter, not an IT specialist!!!), what went wrong adn how to fix it?
View Replies !
Error While Connecting To The DB Using Query Browser
I am a newbie to mySQL world. I have sucessfully installed the mySQL and also have created a schema and a few user accounts. However when I try to connect to the DB from a REMOTE machine using the mySQL Query Browser, I get the following error: "MySQL Error Number 2003 - Cant connect to mySQL server on 'myserver.mydomain.org'". However, I am successfully able to ping the server. Here are the specifics: 1. The Host Server where mySQL has been installed is at my home and is connected to the internet via a Broadband Linksys Router. 2. As I do not have a static IP, I registed for a Dynamin DNS service. I made sure that the port 3306 is opened, both at the router and on the machine where mySQL is installed. 3. I am trying to connect to the mySQL server from my home laptop, which is also behind the same Linksys router. I have also tried connecting from a truely remote machine (the one which is not behind this router, but is connected to internet) - again unsuccessfully. 4. The user account using which I am trying to connect has an 2 entries in the mysql.User table - one with column Host=localhost and another with column Host=%. 5. AFter a bit of googling, I found out that this is a common issue when BIND_ADDRESS and SKIP_NETWORKING are left uncommented in my.cnf file. However, I do not have a my.cnf file in the filesystem. And I have not created one.. 6. I am able to connect to this mySQL server using SSH (using mysql -h localhost -u userName -p)even from a remote machine. However I am not able to connect using mySQL query browser. Am I still missing something here?
View Replies !
Error Connecting: Timeout Expired
discovering an issue with creating connections when my db encounters serious load. The exact error that I'm seeing is: "error connecting: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached." should note that this particular app works well in most normal scenarios, and we only see this problem when there are many threads hitting the database for longer than a few minutes. Roughly once an hour we encounter serious load like this. Here's what I see under 'show variables': Variable_nameValue auto_increment_increment1 auto_increment_offset1 autocommitON automatic_sp_privilegesON back_log50 basedirD:MySQLMySQL Server 5.1 big_tablesOFF binlog_cache_size32768 binlog_formatSTATEMENT bulk_insert_buffer_size8388608 character_set_clientlatin1 character_set_connectionlatin1 character_set_databaselatin1 character_set_filesystembinary character_set_resultslatin1 character_set_serverlatin1 character_set_systemutf8 character_sets_dirD:MySQLMySQL Server 5.1sharecharsets collation_connectionlatin1_swedish_ci collation_databaselatin1_swedish_ci collation_serverlatin1_swedish_ci completion_type0 concurrent_insert1 connect_timeout10...............
View Replies !
Relay-bin On Master?
I am getting relay-bin logs on my master server. They are all empty except for one line that reads: þbin I have no slave settings in my my.cnf file. Any idea where these are coming from and how to turn them off?
View Replies !
Two Master Servers
I am using two master servers that are synchronized with each other so that if one of them gets disconnected, the other one could take over and no data is lost. Now my problem is doing backup on the servers. Say I am doing backup on Master 1 and after backup, I will delete the data. So, since Master 2 is synchronized with Master 1, will the deleted data be written back to Master 1? My batch file is something like this. echo Executing MYSQL BACKUP mysqldump -uroot -proot --result-file=%SAVPATH%%FILENAME%".sql" database1 echo Executing MYSQL DELETE mysql -uroot -proot datalog < "C:Program FilesMySQLMySQL Server 5.0inscript.sql" Script.sql will call the command "DELETE from table1" for me.
View Replies !
|
TRACKER
