Calling A Php Funtion Inside A Mysql Query
hi there, im trying to call a php function that i have created inside a query and im getting an error.when i remove the funtion statment the query is successful. i was wondering is it possible to call a php function inside a query, if so how do i go about doing so.
this is my code:
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
Calling Stored Procedute From A Query - Possible?
Is there any way of looping through a list of dates obtained from a table, e.g. "select mydate from mytable" and then for each of the dates call a stored procedure, e.g. CALL MySP( theCurrentDate ) ? Or could I do it using a stored procedure - this would seem the obvious solution but I'm not sure if it's possible to loop through a resultset in stored procedures? Any pointers would be greatfully received
Trying To Avoid Using Query Inside While Loop
I've done a lot of reading on here and I learned from some of Rudy's posts that it's a bad idea to do a query inside a while loop. I don't know why this is but he seems like an expert so I'll listen What I am trying to do is take the top ten points from a player and display them. First I will post the tables then the code. CREATE TABLE `tournament` ( `gameid` int(11) unsigned NOT NULL auto_increment, `gametype` tinyint(2) unsigned NOT NULL default Ɔ', `gamedate` datetime NOT NULL default ��-00-00 00:00:00', `leagueid` int(11) unsigned NOT NULL default Ɔ', `seasonid` int(11) unsigned NOT NULL default Ɔ', `roomid` int(11) NOT NULL default Ɔ', `gamename` varchar(50) NOT NULL default '', `cost` mediumint(4) NOT NULL default Ɔ', `seats` mediumint(4) NOT NULL default Ɔ', `notes` tinytext NOT NULL, PRIMARY KEY (`gameid`) ) ; CREATE TABLE `tournament_results` ( `id` bigint(20) unsigned NOT NULL auto_increment, `gameid` int(11) unsigned NOT NULL default Ɔ', `memberid` int(11) NOT NULL default Ɔ', `place` smallint(4) NOT NULL default Ɔ', `earnings` smallint(5) default Ɔ', `bounties` float unsigned default Ɔ', `points` float NOT NULL, PRIMARY KEY (`id`) ); Now the follow code would be what I would use if I just wanted to add all the points and not limit it PHP mysql_query("SELECT members.firstname, members.lastname, SUM(tournament_results.points) AS tpoints, COUNT(*)as numgames, AVG(tournament_results.points) AS apoints, members.memberid AS membersid FROM members, tournament_results, leaguemembers, tournament WHERE members.memberid = tournament_results.memberid AND leaguemembers.memberid = members.memberid AND leaguemembers.leagueid = '$lid' AND tournament_results.gameid = tournament.gameid AND tournament.seasonid = '$sid' GROUP BY members.memberid ORDER BY tpoints DESC"); That will total all of their games but I want to limit it their top 10 scores how can I do this without introducing a query inside of the while loop?
Accumulating Values Inside A Query
I only have experience of simple queries, and this one is a bit beyond me. I've done some research, and I think it might be possible to do within a single query, but I'm not sure. I have a single table. It contains columns (among others): date, number. I want to produce a table of DATE, and new_number_count, where 'new_number_count' is the number of numbers on day with date DATE that do not have rows on previous DATEs. For example, if this is my table:
INSERT Funtion Not Working?
I have two pages. One is html form, other is php function. In the html form I have three text boxes, and it works fine. In the php form I have this $username="root"; $password="*******"; $database="FurnitureCatalog"; $Conn = mysql_connect(localhost,$username,$password); $Query = "INSERT INTO furniturecatalog(furnitureName,price,picture) values ('$fname', '$fprice', '$fpicture')"; mysql_query($query) or die('Error, insert query failed'); print ("The query is:<br>$Query<p> "); if (mysql_db_query ($database, $Query, $Conn)) { print ("The data was successfully entered into the database!<br> "); } else { print ("Nope. Try again.<br> "); } When I try this form, it always says that it doesn't work, but I do not see what is wrong with the INSERT Query, and why it isn't inserting the values.
Preventing A Count Query Inside A Loop How?
I have an idea in my head and im pretty sure its possible but I don't have enough mysql knowledge to apply. Basically, I have this: SELECT user_id FROM ml_group_subscriptions WHERE user_group = $id then in php I initialise a loop go over the results: PHP while ($row = mysql_fetch_array($get_users)) { $this_user = $row['user_id']; and then an insert query: INSERT INTO ml_subscriptions (`user_id`, `campaign_id`) VALUES ($this_user, $add_to_campaign) while this is all dandy, I don't want duplicate data. My only current method would be PHP $get_users = mysql_query("SELECT user_id FROM ml_group_subscriptions WHERE user_group = $id"); while ($row = mysql_fetch_array($get_users)) { $this_user = $row['user_id']; $check = mysql_result(mysql_query("SELECT COUNT(user_id) FROM ml_subscriptions WHERE user_id = $this_user"),0); if ($check == 0) { $insert_users = mysql_query("INSERT INTO ml_subscriptions (`user_id`, `campaign_id`) VALUES ($this_user, $add_to_campaign)"); } } as you can see this is putting a query inside a loop which could be potentially huge. Can I not adapt the first SELECT query to only accept data that is not about to be duplicated?
How To Apply Php Or User-defined Functions Inside A Query
Instead of applying a php or user-defined function to data after fetching, I want to apply functions inside queries, not sure if this is possible. This is how it's done with MySQL function: SELECT FROM_UNIXTIME(table_articles.article_pubdate, %M %d, %Y) AS pub_date FROM... Is it possible to replace FROM_UNIXTIME() with the php function date() ? so it's something like SELECT ".date("table_articles.article_pubdate", 'F d, Y')." AS pub_date FROM... The above is just an example, actually I want to apply another user-defined function, which formats text of the field article_content.
Query Inside Query?
I would like to know if its practical to Insert a Select statement inside a previous select statements (array). With that said, the 'inner' select having a WHERE statement thats dependant upon the array results...
Calling Mysql Db From Php
for some reason any php script I write will not call any mysql databases. I have loaded ,mysql 5.0.27 onto my computer as well as apache 2.0.52 and php 5.0.2 but I don't really know if I need to change some code which allows php to call the mysql db's I'm using a windows machine if that makes any difference.
Calling Mysql C API In C++ Project
I am using mysql C API in my C++ project. I am using mysql-4.1.4-gamma and gcc 3.2.2. Problem with this code is that when add_data(i) is called second time SEGMENTATION FAULT occurs at mysql_real_query(). First time it executes the add_data() function successfully. Code:
Calling MySQL In Unix In One Line
I'm running MySQL in Unix and I need to run mysql without ever actually going into mysql. Basically I need to open the database, do what i need to do to the database and exit all in one line of code. If I have to, I could save the sql in a file and go mysql -h localhost -u ______ -p _________ << mysqlcode.txt or something with Unix redirection/piping. However, I'd like to do something more like mysql -h localhost -u _________ -p ________ - (use tempdatabase; select * from test;) Is there anyway to do this. The -e paramater looks like it might do that, but I can't figure out how to use it.
Calling Mysql Fields Into A .php Webpage
Situation: I have created a .php document that displays a youtube video and it works fine. What I want: I want this .php document to display a users youtube video, so i need to get the field from the database and make it so the .php document can call it and use the link from it to display the video. The server is called: 'localhost' The database is called 'db_vbulletin' The table is called 'userfield' The field is called 'field39' But saying this, the youtube video link will be different between users, so im not sure what kind of factor that would have.
Calling MySql Select Procedures In Perl
I am trying to call a "select" stored procedure from perl. I am not quite sure how to do it. Here is the stored procedure: CREATE PROCEDURE spTest() begin select x AS X from tblTest; It works fine when called from within MySQL. mysql> call spTest(): +------+ | X | +------+ | 24 | | 3 | +------+ I have the following code in perl: my $spt = $db->prepare("Call spTest()"); $spt->execute(); $spt->bind_columns($id); while($spt->fetchrow_array()){ print "X = $id"; } I get an error that says I need to use "select into". How do I call this procedure from perl?
Calling MySQL Experts! Using LIMIT Within IN Subquery Question
I have 2 tables that I need to pull data from: 1. members (which contains all my members, of course) 2. blogs (which contains blog posts made by members) The primary key of members is userid, which is a foreign key in blogs. So.. what I'm trying to do is pull out the latest 30 entries and NOT show duplicate posts from the same member. The closest working query of this I wrote is this:
Storing The Image Inside Mysql
i read it affect performance by 1 third or something but isnt that worth it for lets say a online hardware store? or is it actually faster maybe?
Calling Another Database?
I've encountered an issue using foreign keys with mysql: is it possible to call another local database from within a table of a database? For example, if I've got a database consisting of car manufacturers and another one consisting of retailers, then I'd like to have the retailer database to reference the manufacturer database in some way. For example: CREATE TABLE retailer1 ( FOREIGN KEY car TEXT REFERENCES manufacturer.cars(car) ON DELETE CASCADE ON UPDATE CASCADE; ) TYPE INNODB; This way I hope to be able to have the retailer database up-to-date. Is it possible to reference another database in this manor? How do I do it in that case?
Calling Db Function
how do i call a db function from with in a db function which returns a result. can some one pls help me with the syntax, when i call a function from with in a function it says funtion does not allow to return a result set where as it returns only one values.
Calling One Value From Table
I got a table that has only 1 field 1 row of an INT value: $query = "SELECT * FROM site_counter $result = mysql_query($query); $row = mysql_fetch_array($result); echo "$row[0] People Visit My Site"; is there any shorter way to call up that value ?
Inside Firewall Access To Outside Firewall MySQL Server
I have 2 Suse 9.1 boxes with similar configurations. I'm in the process of moving some PHP code from one server (192.168.0.100) to another (192.168.0.102). MySQL is running on each server, and the same PHP code can access its respective localhost databases and make queries with no problem. However, the code on the old server (.100) can access a MySQL server (12.xx.xx.50) outside the firewall (192.168.0.1), while the code on the new server cannot. There is NO firewall rule regarding the two servers -- they are NOT being accessed from outside the firewall.
Calling Php From Stored Procedure!
I was wondering if we can call a php program in stroed procedure in mysql so that I can produce reports for the tables.If possible please write the procedure to call the php from stored procedure.
Could Multiple Calling Of Mysql_fetch_array Possible?
just wanna ask if, it is possible to call the mysql_fetch_array twice or thrice in one query.. example.. $result=mysql_query("select * from event_history as e,company as c,jobs as j where e.event_id='11' and e.compid=c.cid and e.jobid=j.job_id"); $row=mysql_fetch_array($result); echo '$row[companyname]'; <select name="jobs"> while($row=mysql_fetch_array($result)) { <option value="'.$row[job_id].'"> '.$row[jobtitle].'</option> } </select>
Calling Image Into Table
I have 3 cells in each table row. the cells are image1, image2, image3. the data to go in cell image1 is: image1.gif, image2 is: image2.gif, image3 is: image3.gif so can some tell me if it is possible to show these images in a webpage depending wether the image cell has the reference to the image in it. if the image cell has no image reference in it then dont display it.
Parameters In SP When Calling A Report
Set up the connection to the DB in Crystal using MyODBC. I used the Database expert to call my Stored Procedure which has one Parameter and the code is real simple going like this: call SuccessLetter (AppNo) From the wizard i can see and place all the fields from the SP onto the report as long as i hard code an application number into my parameter. But as soon as i change it to a variable (as above) i get the following error from Crystal: Unknown Fields AppNo in order clause MySQL ODBC 3.51 error 42S21 On the VB code side i used Success.SetParameterValue("AppNo", GeneralFunctions.ApplicationNo) to set up the parameter and this does get passed thru so the error is comming from the database expert - almost as if it dont recognise that my stored procedure has a parameter. Which it does and it does work if i use the SP outside of Crystal. I know the SP is working fine cause i have written another SP and then called SuccessLetter with the new SP using a parameter and the results are perfecr.
Calling A Variable From A Different Php File
I have defined a variable named $user in one php file (configure.php) Code snippet: public $user; I want to call that $user variable in a different php file (initiate.php). I have made sure to require configure.php in initiate.php. When I tell $user to echo in initiate.php, it shows up. However, I want to create a table within a database with the name $user mysql_select_db($db_name, $con); $sql = "CREATE TABLE $user ( WhatWant varchar(100), Descript varchar(100), Link varchar(100) )"; mysql_query($sql,$con); For some reason, it won't create the table. It will create the table if I use something other than $user (either a variable defined in initiate.php, or plain text) How do I get it to create the table with the name $user, if $user is located in a different php file?
Calling A Stored Procedure
From what I've read, you can't call a stored procedure directly from a select statement...is that correct? I have this query I'm trying to run: select * from projects where proj_desc like '%".$searchterm."%' and proj_type = '".$proj_type."' and GetDistance($lat1, $lat2, proj_lat, proj_lon) < 50 order by ".$order This query is looking through a database of projects, and running a stored procedure(GetDistance) to find which ones are within a certain distance away (hence the lat and lon being passed to the sproc). The query is doing this while also processing the user's search term they've put in.
Calling Selected Data In A String
I'm doing a quick search in a table and I'm having a problem specifying my data to the table's column's string. for example: SELECT * FROM tableA WHERE columnA LIKE '%4%' Problem is the columnA carries string such as 1,3,14,20, and as you can see, this row is selected as LIKE '%4%' even it doesn't have 4 in its string. Is there a better way to do this?
Calling A Php Function From A SELECT Statement
How can I call a php fucntion from within a MySQL SELECT statement? What I have is: $result = mysql_query("SELECT GetCountry(IPAddrss), IPAddrss FROM pgstats"); GetCountry is my php function, and it does work when I call it like this: echo GetCountry($ip); What am I doing wrong?
Display All Fields By Calling One Field
I created a testing db with three fields: id, title, text, where id is auto increment. I have this on my .php page: $dbh=mysql_connect ("localhost", "username", "password"); mysql_select_db ("testing_db"); $result = mysql_query("SELECT id FROM demoTable"); while ( $row = mysql_fetch_array($result) ) { echo("<P>" . $row["id"] . "</P>"); } this only displays all the id of each row of data. the way i want it to work is to call the id number (eg. page.php?id=1) and then display both the title and text defined for that id. i reckon this is a php syntax problem...would i hv more luck posting in the mysql forum?
Calling A Script Save In Emacs
I'm a Linux user and I written a script in Emacs Text Editor. I was wondering if there was a way that I can have MySql read my script by the file name instead of copying and pasting the script in Mysql.
Inside IF NULL
I have this table: ------------------ id lang name 1 en name1 1 de NULL 2 en name2 2 de name3 I want to return all (WHERE lang='de') rows but if the (name=NULL) then replace it with name from the same id but lang='en'. Is it possible? I have this query: SELECT IFNULL(name, SELECT name FROM table WHERE lang='en' AND id=????) name FROM table WHERE lang='de' Can you fix it?
MySQL5 Trigger Calling Procedure Syntax
I have an UPDATE trigger on my inventory_transactions table, set to call the spUpdateInventoryCounts procedure for the iInventoryID (FK) record being modified. Here's the code for my update trigger: DELIMITER $$ DROP TRIGGER /*!50032 IF EXISTS */ sp_IT_Update$$ create trigger sp_IT_Update AFTER UPDATE on inventory_transactions for each row BEGIN DECLARE tiKey INT; SET tiKey = inventory_transactions.iinventoryid; CALL spUpdateInventoryCounts(tiKey); END; $$ DELIMITER ; ...yet when I modify a row in the Inventory_transactions table, I get an error saying "Error No. 1109 Unknown table 'inventory_transactions' in field list" ...but it's the freakin' table itself! The error would appear to be in this code, and not the spUpdateInventoryCounts because I dumbed that one down to simply say "update inventory set iqtyinstock=5" just to remove the possibility of that being the culprit.
Looking For Tokens Inside A String
I'm trying to do a weird (?) thing with regexp and MySQL. For example, i have a column with: token1|token2|token3 (three tokens separated by pipes) I'm trying to write an SQL query in order to look for the presence of one of these tokens, that is "look for a string like 'tokenX' that is preceded by the beginning of the line OR a pipe, AND that is followed by the end of the line OR a pipe". I have tried this: SELECT * FROM ... WHERE (... REGEXP "(^||)tokenX($||)"); but, of course, it doesn't work. So my question is: what's wrong ? My regular expression, or my idea ?? There is a another way to obtain what i want, that is to select a token within a string when tokens are separated by anything but a comma ?
COUNT (*) Inside Select
I am doing something wrong i would like to do a count inside this select for example: SELECT th.tid, th.tname, th.tmain (SELECT COUNT(*) as postnumber FROM forumpost AS post WHERE post.ptid=th.tid) FROM thread as th WHERE tmain=1
Failure Calling User-defined Function In Procedure
I have de following (a function that I created and a procedure that I also created) : This function checks if already exist a user in the table Users. If exists it returns the user's Uid, otherwise returns NULL. CREATE FUNCTION Check_User (_Username VARCHAR (64), _Password VARCHAR (64)) RETURNS SMALLINT DETERMINISTIC BEGIN DECLARE Ret_Val SMALLINT; SELECT Uid INTO Ret_Val FROM Users WHERE Username = _Username AND Password = SHA1(_Password); RETURN Ret_Val; END; The procedure makes use of the function defined above. First it check if there is a user with a particular user/password, if not then creates the new user : Code:
Use SQL Code From Table Inside Trigger
I have the WHERE clause that I would like to use in constructing larger statements stored inside a database table as a string. Inside the INSERT Trigger for a different table, I would like to be able to: <get the tuple with the WHERE clause I want to use>; SELECT * FROM t WHERE <use code in database>; Is there a way I can pull out this data and append the data to the second statement and execute it?
Format Text Inside Database
I have a news-type database. I pull the data out with PHP. I was wondering if I could format/bold/ certain words in the database when I enter them. For example: Today JOHN CAESAR won his first race. I'd like the name "JOHN CAESAR" to show up bold on my web page. Is there a way to enter it in the database as bold?
Execute A Shell Command Inside SQL
I wonder if there is anyway you can run a shell command inside SQL. for example "SELECT * FROM table;execute shell command" I had googled around and didn't find anything.
Finding User Details Inside UDF
i heared that its possible to get user details inside the UDf by adding the mysql_priv.h header file. But where will this file be available. i am using MySql 3.23.52 on linux8.0 when i try to compile it says :"mysql_priv" file not found. If i can include this file, i can get the thread constructor called...
How To Sort Rows Inside The Group
First step: SELECT ID, Priority, RealID FROM MyTable WHERE ParentID='0' ORDER BY Priority; The result is +----------+----------------+--------------+ | ID | Priority | RealID | +----------+----------------+--------------+ | 1 | 1 | 1 | | 9 | 1 | 1 | | 2 | 2 | 2 | | 11 | 2 | 3 | | 3 | 3 | 3 | | 10 | 3 | 2 | +----------+----------------+--------------+ Then try to obtain the rows grouped by RealID sorted by ID from high to low. This is very important thing and I'm sticking with this: Let's say we have | ID | Priority | RealID | | 1 | 1 | 1 | | 9 | 1 | 1 | I need to obtain second row (the row with max ID in the RealID group). What I worked out is the following: SELECT MAX(ID) as ID, RealID FROM MyTable WHERE ParentID='0' GROUP BY RealID ORDER BY Priority; And Get +----------+--------------+ | ID | RealID | +----------+--------------+ | 9 | 1 | | 10 | 2 | | 11 | 3 | +----------+--------------+ But I'm expecting the following order. +----------+--------------+ | ID | RealID | +----------+--------------+ | 9 | 1 | | 11 | 3 | | 10 | 2 | +----------+--------------+ 1. Can't understand why the rows sorted incorrectly. 2. How to "select" the rows according to my need (I have 10 fields in the MyTable and I think this is not good to select all fields using MAX(...) function). Maybe use subrequests?
Html Links Inside Varchar
I have to put html links inside varchar and text fields. They have to be (somehow) fulltext searchable (of course a substring, %keyword% search, would pick them up - I realize that) and they have to render as clickable links when I output the fields via PHP. How would I do this?
Regexp To Return All Number Inside A Field
does this is possible? all i just want to manipulate is the phone number in my database. i want to get the numbers inside this format text (125) 125-1268 or in this format 225.265.4649. how can i accomplish that in the query?
Multiple Prepare Statement Inside The Procedure
I'm trying with the multiple dynamic queries inside the stored procedure means, inside my stored procedure i want to execute Multiple queries (DDL and DML). for that i'm storing query in variable and then executting it by prepare stmt. It works fine with singal prepare stmt and failes for the multiple prepare stmt. Is there any solution to execute multiple queries inside the Stored procedures or Functions?
|
TRACKER
