Connect To Remote Server
I am very new at this. I installed MySQL and PHP on my Hard drive. I can connect to MySQL through localhost on my hard drive. We have a server at work at a remote location. He just installed MySQL and gave me a password on root. As far as I know there are no databases created. I need to connect to the remote server and create a new user and database.
I've downloaded Secure CRT but don't understand how to use it. I entered my ip addresss in a new session and it seems to connect but then it says session fails.
I put a test script up and just get an error message. Should this script at least not give me an error message. Should I contact the person in charge of the server?
<?
/**
* Connect to the mysql database.
*/
$conn = mysql_connect("localhost", "root", "password") or die(mysql_error());
?>
Client does not support authentication protocol requested by server; consider upgrading MySQL client
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
Connect To Remote Server
I have created a database in a remote host using MySQL 5.0. I created tables using the control panel of the host. I accessed the tables several times using the same procedure. Recently, I downloaded MySQL Admin and tried to connect to the remote server. Nothing happens. It just froze there without any message or what. Is there a secret way of doing this? I can connect to a remote host in a local network but when it comes to using the internet via a router I always encounter this same kind of problem.
Connect To A Remote MySQL Server On The LAN
The MySQL setup on my WinXP machine runs fine with host localhost, username root, and my password. But I can't seem to access my databases from a different machine on my LAN. When I try to connect from another network PC , I always get: MySQL Error No 2003 Cannot connect to MySQL server on 'remotehost' (10060) All the settings in my ini seem correct. I've allowed TCP/IP connections. I know which port to specify. Did I forget to do something on the LAN to allow remote access? I've tried sharing the basedir and datadir folders. That didn't work. I also tried using IPs instead of hostnames. Didn't work either. When I try to ping the remote host (using MySQL Administrator), I just get a timeout error.
Can't Connect To Remote MySQL Server
I am developing a site on a remote cPanel system and I am not able to connect to the MySQL database from my location. My application can connect to the server using localhost just fine. I have ensured that the correct port is open in the firewall (the server responds to telnet on that port) and I have added our IP address as an access host in the MySQL area of the client's cPanel but I am still unable to connect. The exact error message when I try to connect is: Access denied for user: 'user@<my IP>' to database 'user_database'
Connect To A Remote MySQL Server
I need to connect to a remote mySQL server. I have the IP address, userID, and password. When I try using these from another computer I get an "access restricted" error. How do I get to this remote mySQL server?
Remote Connect To Mysql Server
My host says that I don't need to login to my server in order to connect to my mysql server. They say all I need to do is enter this command into a mysql client: mysql -h xxx.xxx.131.240 -u User -p Database Password However, they don't want to mention any client to use to connect with. What client can I use? Putty? Where do I enter that command?
Connect To A Remote DB
Is it possable to to have a program on my server that can access his db? <?php MYSQL_CONNECT("http://remotehost.com","db_name","pass_word") OR DIE("Keine Verbindung zur Datenbank"); mysql_select_db("db") or die("Didn't work again");
Remote Connect
I've installed MySQL 4.1.12 on my server, I can connect from the local machine with navicat, but not from a remote machine. I checked with 'nedstat' and there is something listening on port 3306. I have tried several users and settings. What i want is to set a user name (:support) and that this user can connect remotely with navicat to the mysql server. How would I do this? Or what am I doing wrong?
Connect To A Remote DB
just started a cource in mysql using the mysql db on the instructers server . Is it possable to to have a program on my server that can access his db? <?php MYSQL_CONNECT("http://remotehost.com","db_name","pass_word") OR DIE("Keine Verbindung zur Datenbank"); mysql_select_db("db") or die("Didn't work again"); ?>Paul
Can't Connect From Remote Machine
I am writing some code in ASP3 on an XP windows machine. I am trying to connect to a linux machine which is Redhat 7.3 that is hosting my MySQL database. I am use this code to connect. objConn.Open "Driver={mySQL};Server=http://4.7.165.99;Port=3306;Option=131072; Stmt=;Database=DB name;Uid=User Id;Pwd=MyPassword;" This is the Error message I keep getting: Microsoft OLE DB Provider for ODBC Drivers (0x80004005) [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified I have been looking all over the web, and can't find how to fix this issue, can anyone help me?
Connect To Mysql Remote
I want to access my mysql server remote, I found that by default --skip-networking is on (Salckware - /etc/rc.d/rc.mysqld in /etc/my.cnf it is commented). So I deceide to remove it after that mysql doesn't want to start. So I try to run it "manual". I've run those 2 command: (1) /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid & This gives me: Starting mysqld daemon with databases from /var/lib/mysql STOPPING server from pid file /var/run/mysql/mysql.pid 060822 21:24:17 mysqld ended (2) /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid --skip-networking & This works perfect, but only with local connection, no remote connections :/ Any ideas ?
Connect To Remote Mysql
I had mysql working locally with no prob, I just got my hosting, login to cpanel, mysql add a db, add a user, try to connect to the db on my hosting server via my local mysql command line cd mysql cd bin mysql -h xxxxxx -u username I end up with username@something, access denied, I am behind firewall (these days, who doesn't). I think the username being appended with @something is the root cause of access denying, but I couldn't find a way to get around it
Connect To Remote Database(MySQL)
is there some sort of setting I need to turn on where I can access the database from another server. So instead of using "localhost" I can use the actual server IP address. And just for future reference, is this how you set up a application server connecting to a database server?
Connect To Remote Mysql Through Terminal...help
Is it possible to telnet or ssh to my paid webhost's mysql through the terminal on mac os x without installing mysql locally? (using the terminal to control mysql ). I really don't want to install it locally if I can avoid it as I wont be using my computer as a server. If so how?
Connect To Remote MySql Using MS Access Via IP
I have a MySql database on a remote webserver. I used phpMyAdmin to set everything up. I would like to use MS Access as the front-end to link to the tables in the remote MySql database so I can edit, add, delete data using an Access form. My phpMyAdmin is on a server that has an IP address (like 12.34.56.78:8585). So I tried setting up a DSN on my home system using the same IP address and MyODBC Connector. When I put in the IP as server name, and the user/pass info, when I click test it just sits there for a long time and then I get an error: [MySQL][ODBC 3.51 Driver]Can't connect to MySQL server on '12.34.56.78' (10060)
Connect To Database From A Remote Source
I own a website and plan on running multiple message boards on it...the problem is that I would like a database per board...however my host only gives 1 database....unless I want to pay an extaordinary amount of money for more. So I have used my PC as a webserver before without any problems and in fact ran a pretty big board off it with php, mysql, phpmyadmin installed. So my thought was to use a couple of databases off my PC to help run the new boards. I have created the database...but I'm having trouble with the board connecting. I'm sure that it's some kind of permission that needs to be inserted for the remote host to connect to my databases.
Can't Connect To Remote Host (10061)
I'm running MySQL server on a WinXP box at home. I have a cable modem/router. I've set up port forwarding on port 3306 to the machine running MySQL. I can connect locally just fine, but when I try to connect from a remote location using: mysql -h xxx.xxx.xxx.xxx -P 3306 -u root -p mysql I get: ERROR 2003: Can't connect to MySQL server on 'xxx.xxx.xxx.xxx' (10061) When I try: mysqladmin ping -h xxx.xxx.xxx.xxx Code:
Mysqld Restarting On Remote Connect
I'm on FreeBSD 5.4 with mysql-server-4.1.18_2. Whenever I connect to mysql from a remote client, I get: Mysql error number 2013 lost connection to mysql during query Also, the following is logged: 060506 09:47:25 mysqld restarted 060506 9:47:26 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 060506 9:47:26 InnoDB: Starting log scan based on checkpoint at InnoDB: log sequence number 0 642388. InnoDB: Doing recovery: scanned up to log sequence number 0 642388 InnoDB: Last MySQL binlog file position 0 79, file name ./isd-bin.018710 060506 9:47:26 InnoDB: Flushing modified pages from the buffer pool... 060506 9:47:26 InnoDB: Started; log sequence number 0 642388 /usr/local/libexec/mysqld: ready for connections. Version: '4.1.18-log' socket: '/tmp/mysql.sock' port: 3306 FreeBSD port: mysql-server-4.1.18_2 mysql works fine from localhost and I've granted permissions to connect from certain remote hosts. I just don't know why mysql restarts when a remote host tries to connect.
Cannot Connect To Remote Host MySQL
I'm trying to connect Mysql query browser from my PC (NT) to MySQL on a remote host. I always get the error message :- "MySQL Error Number 2003" "Can't connect to MySQL server on 'whatever.com' (10060)" I've tried with Mysql control centre, and navicat, and they report the same error message. I CAN connect from dreamweaver, but I really want some good GUI tools to administer the DB and data.there is phpMyAdmin on the remote site - but it bugs me.
MySQL Slow To Connect To Remote Database
I was running a PHP/MySQL web site with the database on the local web server. I needed to move the database off the webserver (located in the firewall DMZ) and onto its own machine (behind the firewall on our private network) Now when I run my web site it goes really slow. I ran mysql from the command line on the web server and connected through to the database machine behind the firewall using webserver:/# mysql -h 192.168.1.7 -u www-data -p After I enter the password, it takes around 5-7s before I see the mysql> prompt. Is mysql trying to do reverse dns on the IP address and timing out? I added the machine details to /etc/hosts so it would be recognized but no improvement. Or do I have something wrong with my mysql configuration?
Connect Remote JSP Files With Local MySQL Database?
I use dreamweaver 8.0. I have my jsp files on the remote server Z:. I have my local computer 'A' connected to this server. I have my MySQL database on my 'A' computer. I want to know how to connect the remote JSP files with the database? Currently I am using jdbc.odbc drivers on 'A' computer. But my server computer has Linux and uses org.gjt.mm.mysql drivers. Which drivers and Where should be the drivers?
Connect Remote JSP Files With Local MySQL Database?
I use dreamweaver 8.0. I have my jsp files on the remote server. I have my local computer connected to this server. I have my MySQL database on my computer. I want to know how to connect the remote JSP files with the database? Where should be the ODBC-drivers?
Connect From Unix Mysql Server To Ms Access Server
Im wondering is it possible to connect through my mysql db (running on fedora core 4) and access the ms access tables on the ms access server? I have a connection setup the other way around using an odbc bridge, is it possible to do this the other way around enabling me to view / edit the access tables through mysql.
How To Connect To A Remote Host Using MySQL Command Line Client
I can't establish a connection with a remote host using MySQL Command Line Client. ODBC conn setup successfully. Databases on this remote host can be reached using Crystal Reports. I open MySQL Command Line Client > prompted to enter a password > done successfully so I can connect to local databases. The following is entered to connect to remote host: mysql -h hostname -u myuserid -p but once I hit enter nothing happens.
Cannot Log In To Remote Server
I am trying to set up a replication server and cannot get past an error trying to log on to the master from the slave. I have tried everything I can think of and am at a loss as to what else I can check/do. The error on the slave server is: Error: 'Host 'myslave.mydomain.com' is not allowed to connect to this MySQL server' errno: 1130 retry-time: 60 retries: 86400 The error itself is confusing. Since this is the slave log, the reference to "this MySQL server" does not make sense. I am not (should not be) trying to connect to "this MySQL server" but rather the remote master server. I am guessing that the error is just poorly worded. I have a user on the master with the host name 'myslave.mydomain.com'. What else is needed to allow that user to connect from the slave host? I tried changing the host name to '%' but that didn't help either. Can someone point me in the right direction?
Remote Server
How I can connect my aplication in delphi with database mysql in remote server?
Remote Sql Server
I am using PHP on my site and I wanted to play around with myqsql. Rather than just going ahead and upgrading my account @ a monthly cost for testing, I thought that I would just add mysql on my pc and connect to it from my remotely hosted site. I opened port 3306 on my firewall. I can connect to the database but it will not allow me to select the database
Remote Connection To Sql Server
I've set the remote website, dotbooks.org (207.44.234.74) as an "Access Host" in cPanel. I'm trying to connect to wiishare.org (70.86.206.218) The connection string I'm trying is: <?php $user = "username"; $password = "password"; $database = "database"; $link = mysql_connect("70.86.206.218", $user, $password); mysql_select_db($database, $link); echo mysql_errno($link) . ": " . mysql_error($link). " "; ?> The string works with localhost, but not like this. It just times out Warning: mysql_connect() [function.mysql-connect]: Lost connection to MySQL server during query in connect.php on line 7 Any suggestions?
MySQLimport To Remote Server
I am running mysql on my windows machine, and I am trying to use mysqlimport to import a text file onto a remote server into an existing table. The error I am getting is that access is denied for user 'Robert_Davis'@'%' (using password=yes), when using table: mytable
Connecting To A Remote Server
not 100% sure which forum this should go in.. if it is in the wrong forum i am sorry. i have just got my ubuntu box working as a server at home with dynamic dns. i have still got my website on another server. i have taken all my DB;s across to my server and want the old server to update my new one so there is only one set of data to deal with. my issue is how do i do this? so i started with started with a simple file that connects to ponywars.com with user name and password. Then realized that i should add the user in with external hosts. i did this in phpmyadmin with user name, host being *.* and setting the password and giving it ALL access to make sure i not missed something. but when i ran this from the old server it just hang for ages then said: Warning: mysql_connect(): Lost connection to MySQL server during query in /home/ghoxmfjz/public_html/test.php on line 7 cant conect to ponywars.com so i tried it the other way around to connect to happygolucky.me.uk and get the script to run. this worked fine. so i can only think its a number of things. i tested to see if my ubuntu box was listening on 3306 which it seemed to be. i think i have added the user in correctly but not 100% sure on that one, seemed to have. is the php page understanding how to connect to dynamic dns, cant see why not as the rest of the site works, ssh works, vpn works. as i understand it i have set up a dmz which forwards it everything to the server. sorry i have not given more examples etc not sure what people need to help, so any all helps suggestions, flames etc are all welcome.
Connecting To A Remote MySQL Server
I havn't done this before and i'm not sure how to do it. I have another computer on a LAN that is running a mysql server and is the machine that is also running the intranet server which i am working on. What i want to know is how to connect to this server from my MySQL console so i can administer the databases without having to be in the main machine. I thought it would be as simple as using the IP address but this doesn't seem to do it. Can i connect annonymously like i can from the host or do i have to have a user account setup?
Downloading A Database From Remote Server Using Ssh?
I need to copy a database from a remote server where I have ssh access to my local computer. Can anyone tell me how to do this? I was thinking something like this: - login to ssh $mysql_admin database_name | local_pc (very simplified)
Remote Access To My Mysql Server
I ran grant all privileges on *.* to 'root'@'%'; I've got two questions... firstly, when I try to get to it from another machine on the local network it tells me access denied... secondly, I'm on a soho network with a NAT router... what port/ports do I set up to access the mysql server from the outside?
Connecting Remote Server In Mysql
Waht is the way to connect the remote database in mysql? right now i am connecting it with localhost as server name but if i want to connect other datasource it showing the error datasource not found.
Connecting To Remote MYSql Server
I want to connect to a remote mysql server from command line. I don't have a mysql client installed on my local machine from which i want to connect to my Data base server.
Configuring A Database On A Remote Server
i have an aplication on .net for web, with mysql db, in my local server i have no problems, but recently i upload the aplication into a bougt host; when i open the page on the internet explorer or firefox, the page loads well, except for one simple grid. in another part of the aplication i try to insert a record, the app gave the me no error message, but when i check the table, there's nothing new. i don't if i configuring something wrone, on the web.config. and the worse of all if that i dont get any error?
Problem Selecting DB On Remote Server (I Use Cpanel)
I'm having problems connecting to my a mysql db on a remote server. Essentially, when I try to select the db.. mysql_select_db ("db_music") or die(mysql_error()); .. I get the "Access denied for user.." line. However, I am sure all my info is correct. I've also added my ISP into the list of allowed mysql hosts. Could this be a problem w/ my ISP or a local firewall?
Updating And Then Restoring Backup From Remote Server
I have backed up a mysql db on a remote server (PHPBB) and want to delete some entries from it and then restore it. The file is .sql. what is the best way to do this - i am a bit lost - there is some strange bug happening on the message board and i think this is the only way to correct it for now.
Insert Records To Remote Mysql Server
for a insert statement, there are two packets on the network between the client and the server. so, the packet's number will be double of the number of insert statement. that is rough. I want there will be a few packet used for many many insert statement. Is there any way to make that true.
Remote Access To MYSQL Server Host
I am trying to access a mysql database on my old host (I'm doing a CMS migration to something on a different server.) My hosting company doesn't have a CLUE what I'm talking about when I say MYSQL server host (I'm not even sure I do). They keep telling me it's 'localhost'. I can access both dbs through their prospective phpmyadmins. Is there any way I can find out what the host server is? I would just export the db and then import it into the other one, but all attempts at that have failed.
Database Dumps From Remote Server Via Proxy
How to copy a MYSQL database placed on a remote server using 'mysqldump' where there is a proxy server involved? This proxy server requires user name and password. I have Win XP.
Creating A Data Dump & Uploading To Remote Server
I've just taken an intro class on PHP and MySQL. I've got the technolgies running on my local machine. I can't seem to get a detailed, easy to understand, step by step guidance on how to transfer what I've got locally to my remote web host who is running MySQL and phpMyadmin. I'm running MySQL Server 4.1. Need to know how to copy my SQL tables and database to a sql file and then upload.
|
TRACKER
