Mysql On SMP CPU Under RedHat
I have a 2xPIV Xeon box under RedHat 8 system and want to use mysql 4.0.14. How I should setting mysql for best perfomance ?
View Complete Forum Thread with Replies
Related Forum Messages:
MySQL Redhat
I have installed MySQL 3.53 on two RH7.3 and one RH9.0 boxes. On one of the 7.3 and the 9.0 box, when I try to connect remotely, it takes about 45 seconds to connect, whereas the other 7.3 box connects almost immediately. The fast box has standard install of 7.3 with tomcat added. The 9.0 box is straight RH9.0 standard install. I can't find anything in common between the slow boxes, but not on the fast one.
View Replies !
Mysql For Redhat 9
im planning to have a mysql server in redhat 9. my question is from the list on the download page of mysql, what should i download? there seem to be so many mysql for linux and i cant find the one for redhat 9.
View Replies !
RedHat 8 And MySQL
I recently ran across an interesting problem, and I'm curious as to whether any of you out there have had the same problem. A friend of mine was trying to get his MySQL server running on RedHat, and was having a difficult time. He could not connect from his windows workstation. After a short look at his user table, I could see it was set up to only allow local connections (an obvious default security measure). This is where it gets wierd. From a SSH session, I created a super user with full rights to all databases on all hosts (allowed login from any host). But my friend still couldn't connect from his workstation. I finally realized that the mysql daemon is appending '@localhost' on the supplied username no matter what the user supplies. Thus, a non-local connection fails. Perhaps I'm missing something here...I am obviously not a MySQL expert. But I was able to get my MySQL running very quickly on my Mandrake 9 box. It seems RedHat has made some changes to its distribution of MySQL. I'm not sure what to do next.
View Replies !
MySQL On Redhat Linux
To make a long story short, let me say I had MySQL working on Windows 98 and everything was fine. Well, I took the big leap and removed all traces of Windows and Microsoft from the computer. (hooray!) Once I had Linux running OK, I downloaded and installed MySQL using an RPM package. I guess the server is running (it says it is every time the computer starts and it stops successfully every time the computer shuts down) however, I cannot figure out how to get the MySQL prompt. I've searched the entire hard drive for MySQL, mysql, MySQL*, mysql* and probably some others, too. The only thing I found was a shell script called mysql that starts or stops the server if I am logged in to Linux as root. I cannot figure out how to start the interactive program that allows me to make select statements, inserts, updates, etc. I'm wondering about some things: Did I download and install the wrong thing? Am I just not looking for the correct thing? Did I install it incorrectly?
View Replies !
RedHat 9.0 MySQL, PHP CREATE
I have a RedHat 9.0 web server setup for intranet use. When the webmaster tries to use his CREATE DATABASE and CREATE TABLE scripts it tells him that he doesn't have the permission to do it. I've given all the necessary permissions to do it, I think. Any suggestions?
View Replies !
Installing Mysql-administrator On Redhat
I am unable to install mysql-administrator on Redhat AS 4. #rpm -i mysql-administrator-1.1.6-1.i386.rpm erreur: Dépendances requises: libstdc++.so.6(GLIBCXX_3.4.4) est nécessaire pour mysql-administrator-1.1.6-1.i386 But I already have the library: #ls -l /usr/lib/libstdc++.so.6 lrwxrwxrwx 1 root root 18 nov 16 17:27 /usr/lib/libstdc++.so.6 -> libstdc++.so.6.0.3 Anybody have had such installation problem?
View Replies !
MySQL As Part Of RedHat 9 Install
When I did my RedHat9 install, I choose Workstation and customized the packages I wanted install. As a part of that customization, I chose mySQL DB; however, I can't seem to find any RedHat documentation that says how to get to these installed packages. I would like to just start using them, but not sure where to start. Any hints to get up and going quickly?
View Replies !
Activating MySQL In RedHat Linux 9
After being absent for a while now I'm back with this question: Does anyone know of any guide on how to start mysql on Linux? Actually I was writing a long complain that mysql doesn't run on linux! But during the writing I could sort of fix it! Now it works, but only the mysql & test databases are not active coz their directory isn't created. I think I can do something for it myself! I just wanted to know if any of you went through the same experience: running mysql that is already installed with your Linux package, not grabbing a new mysql and deleting the old one and installing the new one!
View Replies !
Java In Linux (Redhat 9) To Access MySQL
Using a Java program, I can connect to the test database in MySQL. The test database is installed using a MySQL utility, and it can be accessed by any user without supplying a password. The relevant lines in my Java (Java version 1.4.1) code are: Connection con = null; String url = "jdbc:mysql:///test"; // <== no user or password specified con = DriverManager.getConnection(url); However, when I try to connect to the accounting database (built as one follows the Larry Ullman's "MySQL" book), the program fails. I need to supply a user and a password. The relevant lines are now: Connection con = null; String url = "jdbc:mysql:///accounting?user=root&password=pswd"; // <== con = DriverManager.getConnection(url); I cannot get a connection. The error message is: "Invalid authorization specification: Access denied for user: 'root@thorvald' (Using password: YES)" (thorvald is my machine name.) I have tried all sorts of variations on the url, trying to access the accounting database, with no success. I can use the same user/password of root/pswd within the mysql monitor to access anything I want. Any ideas? Again, I am using Linux (Redhat 9) , Java 1.4.1, MySQL 4.0.13, and the MySQL ConnectorJ 3.0.8 (for Java access to MySQL).
View Replies !
Thread_stack On Redhat 8.0
I saw this section in mysql manual. "If you are using Red Hat 8.0 or a new glibc 2.2.x library, you should start mysqld with the option --thread-stack=192K. (Use -O thread_stack=192K before MySQL 4.) If you don’t do this, mysqld will die in gethostbyaddr() because the new glibc library requires a stack size greater than 128K for this call. This stack size is now the default on MySQL 4.0.10 and above." I am using red hat 8.0. Mysql is started automatically when my machine is started. How should I set this variable. Can I add this to my.cnf file and restart mysql. If so how should(format) I add it to the my.cnf file.
View Replies !
What Shoud Be Version On Redhat 7.3
I have installed as OS (Operating System) Linux Red Hat 7.3. My issue is that I don't know what kind of MySQL should I download to install on it. Would you tell me what version from Community > Downloads > MySQL Community Server > 5.0 ,I must to download ?
View Replies !
Replication Error On RedHat AS 4 ( 5.0.33)
I download the newer MySQL version 5.0.33. And i compile it for multi-threads support on my 64 bit Redhat AS 4 running on DELL 2950. Everything is fine while installation time. But error occues when another slave MySQL contact this new MySQL version master. After trying, I found out some kind of error "ONLY" happen on 64 bit RedHat AS4 and running with mult-threads MySQL. I wound not wanna downgrade my 64 RH4 AS to 32. Although "Non-Multi-thread" MySQL can well run on my 64 bit RH4 AS, multi-threads MySQL still my prefer if it can work out.
View Replies !
Installation Problems On RedHat EL4 On Ia64
I'm running RedHat EL4 on an ia64 system. I've been using PostgreSQL for a while but I now have an app that I think requires MySQL so I wanted to try it out. I tried installing MySQL-server-standard-5.0.18-0.rhel4.ia64.rpm and I get an error that it conflicts with mysql-4.1.7-5.RHEL4.1, so apparently I've already got MySQL 4.1.7 on the system. I want use PHP with MySQL, which means I have to configure PHP and tell it where the MySQL headers are. But I don't seem to have headers, at least not that I can find. I tried uninstalling MySQL 4.1.7 first but it says that dovecot and perl depend on it. I tried installing the "headers" rpm for 4.1 but the only one I found was 4.1.18 and rpm says it conflicts with mysql-4.1.7-5.RHEL4.1. So, any suggestions? I don't think I'm currently using MySQL for anything, but I don't want to break perl. I'd like to get 5.0 running. I just don't know enough about Linux and RPMs to be confident that I can uninstall 4.1 and install 5.0 without screwing something up.
View Replies !
ERROR 2002 (HY000): Can't Connect To Local MySQL Server Through Socket '/var/lib/mysql/mysql.sock' (13)
I have a problem connecting to sql and can't find anything on the net to solve the problem. I have some sql databases running on a server. when I'm root on the server and I want to login to sql I do "mysql -ustudent -p -Dwordnet30 and it works fine. when I'm logged in with the user account on the server, i get this error message: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (13) so with the same user name in mysql, i can log on when i'm root, but not when i'm the user. the grant table for the user looks like this: Code:
View Replies !
Can't Connect To Local MySQL Server Through Socket '/home/data/mysql/mysql.sock' (13)
I just installed mysql on linux. If I open a terminal, su to root, then type "mysql", I am able to connect to the server and run my queries. If I exit out of su so that I am my own id (baisley) and type "mysql", I get this error: Can't connect to local MySQL server through socket '/home/data/mysql/mysql.sock' (13) Any idea why? mysql.sock has full permissions (read/write/execute), so it should be accessable by user baisley. If I am baisley and I run "mysql -u mysql" (as mysql is the user that the RPM set up), it will connect. What I would like to be able to do is run this without having to be user mysql all the time. How do I go about setting that up, or is it better to run all my queries/make tables as 1 user?
View Replies !
ERROR [HY000][MySQL][MyODBC 5.00.11][MySQL] 2006 MySQL Server Has Gone Away
Hosting Package Environment: ASP.NET ver 2 MySQL 5.0 FP Extensions 2003 Progression: Developed Website Outline Developed Database in Access2003 Migrated AccessDB to MySQL @ Hosting Service using Migration Tool. Can connect using MySQL Admin tools and run queries fine and all data, relations etc. are there. PROBLEM: (The heart of the matter) Starting simple, created GridView Control using Microsoft Visual Web Developer 2005 Express, a few glitches here and there, used the MySQL Connector/ODBC v5.00.11 followed instructions. Can see database in Database Connections Window but when I try to connect the GridView Control to it I get: "Database schema could not be retrieved for this connection. Please make sure the connection settings are correct and that the database is online. ERROR [HY000][MySQL][MyODBC 5.00.11][MySQL] 2006 MySQL server has gone away" Had thought that "Microsoft Visual Web Developer 2005 Express" might be messing with the ODBC driver so thought to download the .NET Connector. That's when it all went bad. The documentation does not say how to install or use the connector or where to put the files. It seems to assume that these bits of information are common knowledge and I suppose that if I had kept up with the technology it might be. But alas I didn't and it Isn't and It Don't work.
View Replies !
Could Not Load MySQL Driver! Compile Php --with-mysql Or Install The Mysql.so Module.
I am trying to install Media Wiki 1.5.2 on Windows XP and I have already installed apache_2.0.55-win32-x86-no_ssl ,mysql-5.0.15-win32 and php-5.1.1-Win32 . When I am trying to install Media Wiki 1.5.2 I receive the following message : Warning: dl() [function.dl]: Not supported in multithreaded Web servers - use extension=mysql.so in your php.ini in C:Program FilesApache GroupApache2htdocsmediawikimediawiki-1.5.2install-utils.inc on line 17 Could not load MySQL driver! Please compile php --with-mysql or install the mysql.so module.
View Replies !
Can't Connect To Local MySQL Server Through Socket '/var/lib/mysql/mysql.sock' (11)
We run Bitrix CMS and upon installing the web statistics module, it will sometimes show this error: Error! mysql_connect('-', '-', '-') Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (11) The max connections has been raised to a 1000... and SHOW GLOBAL STATUS says for the maxed used connections: Max_used_connections 273 The server does not really max out...
View Replies !
How To Configure MySQL ODBC Driver To Connect To A Mysql Server On My Own Side Of The Router?
Using MS Access, I have attached to MySQL servers in other states and other countries on the other side of my router. But when I use the MySQL ODBC driver 3.51 to connect to a MySQL server on my own LAN, the driver tells me it cannot make the connection. Here are the ODBC driver connection parms: Data Source Name: (free field - name my "my linux box" will do nicely) Host/Server Name (or IP) - something like MSQLUserName@ServerName.net has worked fine for me in the past. Now I'm trying 192.168.1.106 Database Name - whatever, mysqldb works fine, any valid db User - root Password - myrootpass Port - 3306 has worked fine 4 me N the past. Dunno whether 2 use now SQL Command On Connect - haven't ever put anything here Perhaps there is some configuration in mysql user privilege for the mysqluser "root" that would prevent him from logging from a remote PC to the mysql server?
View Replies !
Warning: Mysql_query(): Can't Connect To Local MySQL Server Through Socket '/tmp/mysql.sock' (2)
I'm trying to connect to my MySQL database (sitehosted by GoDaddy) using PHP. I am having these errors and don't understand what they mean Warning: mysql_query(): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2) in /home/content/n/l/a/nladmin/html/v5.0_3/c_register.php on line 6 Warning: mysql_query(): A link to the server could not be established in /home/content/n/l/a/nladmin/html/v5.0_3/c_register.php on line 6 Notice: Query: SELECT * FROM types MySQL error: Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2) in /home/content/n/l/a/nladmin/html/v5.0_3/c_register.php on line 6 here4 Warning: mysql_close(): no MySQL-Link resource supplied in /home/content/n/l/a/nladmin/html/v5.0_3/c_register.php on line 13 I've checked paths and connection settings and don't see any problems. My guess is now that the problem is coming from the opening and closing of the DB. my script, c_register.php uses a require_once('../mysql_connect.php') to open the connection to the database. But I also have a function definition in c_register.php that uses require_once('../mysql_connect.php') when called because it needs a connection to the DB. Here's a visual that might help:
View Replies !
MySQL Error Number 2003 :: Can't Connnect To MySQL Server On 'hostname'(10065)
I was running an older version of the query browser a while back to connect to an older version of mySQL (3.0) running on a linux box. The server hasn't changed, but the query browser has been upgraded to 1.1.10. I can't go back to the older version of the query browser because the machine that ran it got re-formatted so I downloaded the new version and installed it. So ... I get the following error when I try to connect: MySQL Error Number 2003 Can't connnect to MySQL server on 'hostname'(10065) Interestingly, I wrote a simple PHP script to connect to the server and pull some data off of it:
View Replies !
Table Rows Inserted By Embeddded MySQL Cannot Be Retrieved By MySQL Tcp Client
I have encountered a weird behavoir of embedded MySQL. Through a simple program I made (in Delphi 6), I can insert rows to a table through embedded MySQL and I can retrieve the rows from my program. But using mysql.exe which points to the same table (through 127.0.0.1, with the same basedir and datadir), I cannot see the rows I inserted using my embedded program. Another way around, the rows inserted by mysql.exe can be seen in my embedded program. But after a row is inserted by mysql.exe, the rows inserted by the embedde program are deleted (or cannot be queried). Can anybody explain why is this? Is there a way to fix it?
View Replies !
DBD::mysql::st Execute Failed: Lost Connection To MySQL Server During Query
I am using perl to connect to a database and then pull the rows off of the table one by one to manipulate the data. If I use a smaller table (~8 MB), I wait for around 20 seconds but then the table values are read just fine. However if I use a larger table (~30 MB), I wait for a while and then I get the message: DBD::mysql::st execute failed: Lost connection to MySQL server during query I have tried searching for the solution to this problem and haven't found anything that helps yet. I have changed the values of 'max_allowed_packet' and 'wait_timeout', with no effect. Any ideas?
View Replies !
I Want To Make Transfer Data Between MySQL Server To MySQL Local .
I want to make transfer data between MySQL Server to MySQL Local . My Environment. Server < --- > My PC Client Server = ::::: MySQL DB Server ( for Linux ) ::::: Apache .. ::::: Linux PC Client = ::::: Window ::::: MySQL run localhost ( for window ) How i transfer data from mysql server to mysql local .? Caz i don't want to connect via 3306 port .. Can i use others way?
View Replies !
Can't Connect To Local MySQL Server Through Socket '/tmp/mysql.sock'
I've installed MySQL-4.0.14 under RedHat 8, using both rpm's and compiling from source. When I try to run MySQL, I get the following error: Can't connect to local MySQL server through socket '/tmp/mysql.sock' After much searching on Google, and reading many newsgroup threads on this error, as well as reading the manual, I'm still stumped. Most of the advice I've found suggests that the path to mysql.sock is wrong, which makes sense, but I don't have the file mysql.sock anywhere on my machine, so obviously I can't correct the path.
View Replies !
MySQL-error : Can't Connect To Local Mysql Server Through Socket
On a freshly installed Fedora C3 (incl. webserver apache php mysql) i get the following problem when connecting to mysql through a browser (phpMyAdmin):: #2002 Can't connect to local MySQL server through socket /var/lib/mysql/mysql.sock On the website of MySQL this error is mentioned but I found no solution. In /var/log/messages the following log occurs : localhost kernel: audit(....): avc: denied {write}for pid=2458 exe=/usr/sbin/httpd name=mysql.sock dev=hda13 ... What I have tried : - mysql.sock is srwxrwxrwx, seems ok, but dont know what the s stands for - the dir /var/lib/mysql was drwxr-xr-x and I changed it to drwxrwxrwx : no effect - tried different version of phpMyAdmin : same error - installed my website and got the following error : No connection possible with database (in the next version I will improve the error-messages) - through commandline there is no problem in connecting to mysql (log in, create databases, inserts, deletes, uploading dumps, making dumps, ....) What is the solution or what else can I try ?
View Replies !
Incorrect Key File For Table Error When Upgrading From MySQL 4 To MySQL 5
I have installed MySQL 5.0.67 yesterday. Previously we were using 4.0. On the development server, testing server, and training server this upgrade went smooth. The only thing I did there was run mysql_fix_privilege_tables. But yesterday, after doing this same thing on production server, something went wrong, at least with one database. While I was in the office things looked fine. But this morning I noticed error messages like: 090119 16:29:04 [ERROR] /usr/local/mysql5/bin/mysqld: Incorrect key file for table './questionnaire/answers.MYI'; try to repair it I tried: repair table answers but then I got the following error message: 090120 8:49:21 [ERROR] /usr/local/mysql5/bin/mysqld: Table './questionnaire/current_answers' is marked as crashed and should be repaired
View Replies !
How To Connect Remotely To Linux/MySQL Using MySQL Query Browser
http://dev.mysql.com/doc/query-brows...onnection.html I'm trying to connect from my Windows based PC to a dedicated server which is running on Linux system. I type server host and port 3306 user name admin + password and default schema and I get access denied message. I use putty to connect to the server using IP and port 22 and it connects to the server. What settings do I need to use to connect to MySQL using query browser?
View Replies !
Mysql Pegging One Proc To 100% Why? How To Stop Unwanted Mysql Procs
When I run top I have mysql_safe running its *** off and it is pegging one cpu core to almost 100% but the other core is sitting at 0. What is this mysql_safe? I also have a mysqld process that is doing a little at the same time but nothing like mysql_safe. I think the mysqld process may be the actual process I need. And why isn't the mysql_safe process spreading across cpu cores? When I do to /etc/init.d I find the 3 mysql's... mysql mysql ndb mysqlndb-mgm I did some searching and saw that mysql ndb is for clustering. I am not doing any clustering, this DB is about 1 GB and nothing extremely huge. Can someone explain what I can get rid of/ how I can find out what apache/php is using, how I can stop ones I don't need? I did install mysql with sudo apt-get install mysql.x.x
View Replies !
Can't Connect To Local MySQL Server Through Socket '/tmp/mysql.sock' (2)
I am using a Mac running Mac OS X 10.4.8 and I have successfully installed MySQL on it but when I go to run it using the command sudo ./bin/mysqld_safe & all it does is display a random dumber and when I try the command ./bin/mysqlshow -u root -p I get an error message saying Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)
View Replies !
How To Use A Copy Of A MYSQL 4.1 Database In MYSQL 5 Running On Ubuntu Linux
We had a "permanent world" game server running on an older PC, under Ubuntu 5.10, using a MYSQL 4.1 database to store persistent data for the players, then the hard disk quit. We did back up our data on a regular basis, but didn't use MYSQL to do the backups, we simply copied the MYSQL/data/ folder to disk. So now we have a new hard disk, with Ubuntu 7.10 and MYSQL 5 installed. We have everything working, in that we have created the appropriate database and, using a simple test module of our game which will create some of the tables if they don't exist in the database, we can store and retrieve data from the database tables. The problem we have is how in the world do we get the data from the backup copy of the MYSQL 4.1 created database into the new MYSQL 5 database correctly? With 4.1 we could copy the contents of the database folder right into the database folder in the /var/lib/MYSQL/ folder, but this procedure didn't work with MYSQL 5. The files seemed to copy, as in the copy operation gave no errors, but we get an error that says the database is unavailable and to make sure the MYSQL server is running - it is, so we're stumped, and our game server is offline.
View Replies !
Using MySQL 3.23 Driver With MySQL 4 (and Borland DbExpress Drivers)
I've been playing with the Borland dbExpress Drivers, and it would appear that Borland only have beta drivers for MySQL 4.x.x However it would also appear to be possible to access a MySQL v 4.x.x database using the 3.23 client libraries (i.e just get libmysql.dll from 3.23) can here see any problems in doing this? The only ones I can see is we'll loose some features such as the ability to use encrypted SSL connections.
View Replies !
Restore Mysql Databases From /var/lib/mysql/user_database/ Files Only?
I recently had a harddrive failure and luckliy I can still access certain directories on this failed drive. I can still access the /var/lib/mysql/ directory which holds all the users databases and have backed all these up separately using tar. Now what I need to know is how do you restore these database files to another server? I tried simply untar'ing one of these to the new servers /var/lib/mysql/ direcotry and it stuffed Mysql up - it went offline. I had to get a cpanel tech to bring Mysql back online.
View Replies !
|
TRACKER
