Show All Locks On A Table
I found a way to do this before, but I didn't write down how I did it, so I don't remember it now. And I've searched http://www.mysql.com/doc/ in vain.
View Complete Forum Thread with Replies
Sponsored Links:
Related Messages:
Table Locks
I have a table with ~1.5 million rows and 200 columns. I am doing a "Delete from" statement to clean out the table, but still keep the table structure. When I do this I get an error message about exceeding the lock table size. Can someone explain (in newbie terms) how I can change the lock settings so that I can delete the entire table at once?
View Replies !
View Related
Frequent Table Locks
Since we upgraded to MySQL 4.0.13 from 3.23, we have been getting table corruption often. It happens about twice per week (with about 500 queries per second average). I have even set up a cron to run mysqlcheck every hour to try to do some damage control. The biggest problem is that once the table is corrupted, it seems to be locked. Well, no clients can read from it. Once repaired, just one record is usually lost for each time the corruption occurs. I am not sure if this is a MySQL bug or even how to reproduce it.
View Replies !
View Related
Searching Table Which Is Being Constantly Updated Locks Up.
I'm logging mail to a database, and using php to make queries. The mail is coming in constantly, so the table is being added to, in batches of up to 30 mails. I have around 600k records. The queries are properly indexed, i think; i have index on date and domain, the fields I query on. Mostly the queries run quite fast, but sometimes the queries take up to two minutes. The query is a union of two queries into two different tables. mysqladmin -proc says the query is in state "sending data" for the whole time. Should it be a problem querying on a live table this size? Any parameters I can tweak and/or monitor? What if I seperated the data in two tables, one for today being updated constantly, and the other for the historical data, and todays data being moved to historical at midnight. Then queries to the historical data can be stored in the query cache.
View Replies !
View Related
Show Row In Table
I have a dynamic html table with one column that has text, then the other column has dynamic text pulled from a table. Is it possible to hide rows in my table where the dynamic text comes back null? I don't even know where i would start
View Replies !
View Related
SHOW TABLE
If i run "show table table_name;" i get a full description about columns,primary keys... but i dont get the constraints foreign keys. I need to know how are my database tables associated, that is because i need to know the foreign keys from all tables.
View Replies !
View Related
MyOLEDB Doesn't Support Commands Like SHOW FIELDS, SHOW TABLES
My code is shown below, I can select * from employees but I cannot get any data back from SHOW FIELDS, I do not receive an error, in fact, something is returned but I'm not sure what. I can execute the command: SHOW FIELDS FROM test.employees in the Control Center just fine, even cmd.ExecuteReader will enter reader.Read() once, something is returned but what does it look like? ......
View Replies !
View Related
SHOW FIELDS FROM Table?
My code is shown below, I can select * from employees but I cannot get any data back from SHOW FIELDS, I do not receive an error, in fact, something is returned but I'm not sure what. I can execute the command: SHOW FIELDS FROM test.employees in the Control Center just fine, even cmd.ExecuteReader will enter reader.Read() once, something is returned but what does it look like?
View Replies !
View Related
Table Fields Do Not Show Up
When creating a connection to my mysql database using dreamweaver mx, or various other programs, i can see the table names once the connection is made, but the fields do not show up with the exception of a couple of tables. I've looked over those tables several times and cannot find any differences that would cause this problem. The only program this does not seem to affect is phpmaker.
View Replies !
View Related
How Do I Show Everything In One Table Where The Relationship Is Many-to-many?
I have a table of tracks and a table of albums. Because many of the tracks also appear on compilation albums, there's a many-to-many relationship, so I have a link table called tracks_has_albums. (Bad name, I know) What I'm having trouble with is writing the query to spit out all the tracks regardless of whether it appears on an album (I want to check that every track has been associated to an album but also not all tracks were ever on an album) From what I can figure, I need a LEFT JOIN of some kind but I can't figure how this is used with a link table and I'm finding the MySQL manual pretty overwhelming.
View Replies !
View Related
SHOW TABLE STATUS FROM DB_NAME
SHOW TABLE STATUS FROM db_name LIKE 'tbl_name'; **The command above is to show all the properties under tbl_name. My question is, how can I get the properties in certain condition. Let's said under tbl_name contain a column name call type and it differential with A and B. So how can I get those properties where the type='A'?
View Replies !
View Related
'Show Table Status' Speed
if anyone knows which is faster.. "SHOW TABLE STATUS LIKE '[tablename]';" vs. "SELECT COUNT(*) FROM [tablename];" I'm trying to pick between these two queries (in order to get the size of the table), but want the faster of the two.i expect the table to be very large (millions of rows).
View Replies !
View Related
Java Mysql Show Table Status
I am using java to retrieve a resultset with "show table status" mysql command. I am having problem reading the [name] and [engine] column. In the metadata object it is showing as VARCHAR but when I do getString() it is returning me the object string (e.g. "[B@1e3e7d2")and not the actual database value. I am using Mysql 4.1 and jdbc driver 3.1. I tried getB/Clob, getBytes, getCharacterStream() and none of them is working.
View Replies !
View Related
Show Table Status :: Last Updated Time?
I need to place the date a MySQL table was last updated into a PHP variable. SHOW TABLE STATUS provides lots of information, including update_time, for all of my tables. But how do I assign the value of update_time for my "members" table into the variable $dateLastUpdated?
View Replies !
View Related
Have My Recordset Table Show Up In Random Order
I have the following code on my PHP page and my goal is to have the recordset show up in a random order each time the page is visited. I have tried a ORDER BY RAND() and come up with errors only. Is there anyway to find out what code I need to use and where I would place it in this piece of code? Code:
View Replies !
View Related
SHOW TABLE STATUS & The Nested SELECT Statement
The "SHOW TABLE STATUS" command seems to return a result set, just like "SELECT * FROM SomeTable". Therefore, since the following is valid: SELECT * FROM (SELECT * FROM SomeTable) I inferred that this functionality would extend to the SHOW statement: SELECT * FROM (SHOW TABLE STATUS FROM SomeDataBase) But such a command gives an invalid syntax error. I want to query the data_length from a few tables, place those values into temp variables and then run a second SQL command using those values. Is what I'm trying to do possible?
View Replies !
View Related
Retrieve Two Rows From Table And Show Result In Single Row
I have three tables, one table is with personal details, another table is with contact details and another table with contact type 1. personal_details 2. contact_details 3. contact_type the structure of the tables are given below personal_details ----------------- id | first_name | last_name 1 john | smith 2 Kevin | McDonald contact_type ------------ id | type 1 | home 2 | work contact_details ---------------- id | personal_details_id | contact_type_id | address | zip | state | phone 1 | 1 | 1 | abc | 123 | CA | 1234 2 | 1 | 2 | pqr | 321 | TX | 4321 3 | 2 | 1 | xyz | 456 | WA | 9876 4 | 2 | 2 | asdf | 654 | FL | 6789 in the contact_details, we have two rows for one person. first row is his home address and second row is his work address. i need to select both the home address and work address from the table and show in all these details in the result... the structure of my result has to be as given below first_name | last_name | home_address | home_zip | home_state | home_phone | work_addres | work_zip | work_state | work_phone
View Replies !
View Related
Locks
I'm designing a system for bank operations registry, the system is required to give to one user a reference number that will be used in the bank's system as a reference. At the end of the bank's process this number will be also used as the key for keeping track of the file that the bank's system outputs. In the meantime, another user has to be able to generate another serial from the tracking system to make another bank operation. I've thought of two different aproches to solve this: 1) Lock the table with LOCK WRITE so there will be no chance to repeat the numbers. 2) Make an insert and later on, insert the rest of the information to the tables. Aproach number 1 has one evident problem, while the first user doesn't complete the whole procces, the lock will prevent other users to get a number to start their own proccess. Aproach number 2 has problems as well, because, if user number 1 doesn't complete the proceess there will be a serial number which doesn't have all the information that it should have. Is there another solution ?
View Replies !
View Related
Help: Detecting Locks?
I'm writing a program (using mysql++) where I want users to be able to lock a row while they are editing it. My problem is I don't know how the 2nd user can detect the lock vs it looking like a failed query. I have innodb_lock_wait_timeout set to 1 second, which works fine, but mysql returns two errors when I try to update: ERROR 1205 (HY000): Lock wait timeout exceeded.... ERROR 1064 (42000): You have an error in your SQL syntax.... Unfortunately, as far as I know, I can only get the *last* error from the query which is 1064 - bad syntax. Since the 1064 overwrites the 1205 error, I can't differentiate the two.
View Replies !
View Related
Detecting Locks
I am having a hard time finding any info on this subject, so I was hoping maybe one of you could give me some pointers. I am writing an application in Java that uses Connector/J to interface with a MySQL database with InnoDB tables. When user #1 opens a certain record set I am locking this record set in share mode. Therefore if user #2 selects the same record set (and thus placing a lock as well) user #1 will not be able to update the record set. Is there a way to detect this, and thus making it possible to inform user #1 that an update is currently not possible due to another lock?
View Replies !
View Related
Innodb & Locks
My Applications, that uses ADO/VB^ to communicate with a MYSQL db with Innodb tabes need to create row level locks. I got this working by using the following code ( abridged from main application) .....
View Replies !
View Related
Locks In Non-transactional Tables
I am using the MyISAM engine in my tables I need to support atomic operations in read and write operations I have 2 tables that I am interacting with during a block of code that must be atomic: 1) Read from table A 2) Write to table A 3) write to table B This is done in 3 separate consecutive queries I tried the following:Code: LOCK TABLE A READ, A READ WRITE, B WRITE .. run the 3 queries here, one after the other... UNLOCK TABLES
View Replies !
View Related
Myisam Insert Locks
I created a table purely for writes, for storring log data, which won't be read, updated, or deleted. It may be read, maybe once a month, so the read really isn't important.Basically, all I will have is INSERTs. My question is, when one INSERT query is being processed, can other INSERT queries simultaenously be processed as well? Or is the table locked when 1 insert is occuring?
View Replies !
View Related
Read & Write Locks
I need to lock some of my tables for a while with lock tables. However I find how the READ and WRITE locks is implemented in the MyISAM storage engine a little odd. When obtaining a READ lock all updates are prevented, including writes from the thread obtaining it. WRITE locks gives exclusive access to the issuing thread. However what I want is to give read and write priveleges to one thread and read priveleges to all other threads, and I can't figure out how to obtain this effect with lock tables... Is it even possibel?
View Replies !
View Related
Website Freezes Due To Locks
I have used this command for database back up mysqldump -u USER -pPASSWORD --skip-extended-insert --lock tables DATABASE | gzip dump.sql or mysqldump -u USER -pPASSWORD --skip-extended-insert DATABASE | gzip dump.sql But even though i use lock tables or not , my website freezes for that period of time untill backup is finished. Is there anyway that users should be able to use website during backup
View Replies !
View Related
CPU Pegged - MySQL Locks
have a dual Quad core processor, 8 gig RAM, SUSE running MySQL 5.0.26. Randomly, usually during peak times, the MySQL will completely lock up and stop serving queries. Looking at HTOP during the crash we can see 1 out of the 8 processors pegged at 100% and hardly any RAM or other CPU usage going. If we kill 9 then MySQL starts again. I think one mysql process is locking the database. I don't know if this is a mysql bug or if it's a query locking every db. I'm leaning towards a mysql bug since a query that locks every would have to be an administrator database command.
View Replies !
View Related
Does "Show Process List" Show Full SQL Query?
I want to find out the queries that hang in my db, I have been running show processlist and using process list in PHPMyAdmin, but does both of these show the full/entire SQL query or just part of it? If it shows only part of it, how can I view the full SQL query in the process list?
View Replies !
View Related
Backups Taken By Mysqldump Locks Database
i've made a backup / restore script which first dumps the content of the database with mysqldump and the copies the backup file to another location. What i find strange is that after mysqldump is finished with dumping the data and the copy operation is started, the database does not accept inserts or update. In our Java application (using hibernate) we are informed that tables are locked (even thoug they should not be). when the copy process is finished it works again!
View Replies !
View Related
Complicated Search Locks Up MySQL On OpenBSD
I have an OpenBSD 3.3 system running MySQL 3.23.55 from the ports tree. Everything started out at the default settings. This system holds a large vBulletin 2.2.9 forum database, and that's pretty much the only application that uses any resources. Everything works fine, except that when the forum administrators do an IP search, the database locks up and won't respond to any more queries until it gives up on that search or is restarted. The actual query that causes the problem is: Code:
View Replies !
View Related
Show/not Show Option
I have a php page that displays pictures. The pictures comes from a mysql database. The way I am creating the recordset to dislpay is "Select * from tblehouse" . Now what I want to do is instead of selecting every picture from the database maybe create a new field that will take in the option of being checked or unchecked. Then have the query select only the "checked" to display. So my question to you guys is how would create a field that takes in a check box and what would be the sql statement to query just the checked records.
View Replies !
View Related
Limiting Fields In "show Table Status"
show table status like "products"; Sometimes this is too much information and I was looking for a way in MySQL to select only the columns you wanted to see like you could do with a select. I know I can use PHP or Perl to parse this and output only what you want but wanted to see if there was a fairly easy way to do so in MySQL. For example if I wanted to see the Name, Rows, and Auto_increment fields only.
View Replies !
View Related
Show Databases
I just installed MySQL on my home PC and I tested out the show databases query, and it lists two: information_schema bbdatabank The second one is one I created myself, but I don't understand what the first one is. It is not listed in my 'data' folder, but mysql and test *are*, yet they aren't listed when I type the show command. Why is that? How can I get them listed so that I can use them, and what is the information_schema?
View Replies !
View Related
SHOW VARIABLES LIKE
This time I am using 4.0.13-max (tar format from www.mysql.com) on Redhat 9. I have an understanding question why would the command SHOW VRAIABLES give me once the real output and once the symlink ouput for directory names ? Sample (datadir and basedir) : mysql> SHOW VARIABLES LIKE '%dir%'; +----------------------------+--------------------------------------------+ | Variable_name | Value | +----------------------------+--------------------------------------------+ | basedir | /usr/local/mysql-max-4.0.13-pc-linux-i686/ | | bdb_logdir | | | bdb_tmpdir | /tmp/ | | datadir | /usr/local/mysql/data/ | | innodb_data_home_dir | | | innodb_log_arch_dir | ./ | | innodb_log_group_home_dir | ./ | | innodb_max_dirty_pages_pct | 90 | | tmpdir | /tmp/ | +----------------------------+--------------------------------------------+ 9 rows in set (0.04 sec)
View Replies !
View Related
SHOW VARIABLES LIKE '%dir%'
This time I am using 4.0.13-max (tar format from www.mysql.com) on Redhat 9. I have an understanding question why would the command SHOW VRAIABLES give me once the real output and once the symlink ouput for directory names? Sample (datadir and basedir) : mysql> SHOW VARIABLES LIKE '%dir%'; +----------------------------+--------------------------------------------+ | Variable_name | Value | +----------------------------+--------------------------------------------+ | basedir | /usr/local/mysql-max-4.0.13-pc-linux-i686/ | | bdb_logdir | | | bdb_tmpdir | /tmp/ | | datadir | /usr/local/mysql/data/ | | innodb_data_home_dir | | | innodb_log_arch_dir | ./ | | innodb_log_group_home_dir | ./ | | innodb_max_dirty_pages_pct | 90 | | tmpdir | /tmp/ | +----------------------------+--------------------------------------------+
View Replies !
View Related
How Can You Show SUBTOTALS?
How can you show SUBTOTALS in the same column as the data, NOT in a separate column? I need to SUBTOTAL in the same column as one of the the data columns, like the subtotals 700 and 800 under Field 3 below (I really have 21 columns). Also I must show one blank row after each resulting group: .....
View Replies !
View Related
COUNT(*) To Show 0
I have a table called 'empire' that contains records of empires. I also have a table called 'kingdom' that contains records of kingdoms that have an empireID column that associates individual kingdoms with an empire. I need a query that returns all of the empires and the number of kingdoms belonging to them. This is what I have so far: PHP Code: SELECTempireID,COUNT(*)AS'kingdoms'FROMkingdomGROUPBYempire The problem with this is that it doesn't list all of the empires if any of them don't have any kingdoms that belong to them. How can I modify or otherwise write a query that will include a list of all empires and the number of kingdoms, even if the number is 0?
View Replies !
View Related
Show Entries
I'm doing a simple cms. I want the articles organized by tags, so I have a "entry" table, a "tag" table, and a "entry_tag" table with each row specifying an entry matching a tag. I select entries marked by a specific tag by : SELECT DISTINCT entry.title FROM entry, entry_tag WHERE entry.id = entry_tag.entry_id AND entry_tag.tag_id = 1; However, that only works for 1 tag. How do I select entries that matches multiple tags ?
View Replies !
View Related
Show Records
this query shows same record with the 2 tables. SELECT * FROM `products` p, `order_tmp` ot WHERE p.id = ot.product_id how can I only show a record that do not have a record in the second table. vice versa of the the sample query.
View Replies !
View Related
Show Results Of Sum()
A text column contains these sort of numeric values: 12.34598374 0.9 17.762145 2.2169 1.333333 SELECT sum(the_values_in_text) FROM my_table; returns 34.55836174 I need to get the result in US currency so that it returns $34.56
View Replies !
View Related
How To Show The Warnings?
when i load data into a table using: mysql> load data local infile ... into table ..., Mysql gives me: Query OK, 839 rows affected.. Records: 839 Deleted: 0 Skipped: 0 Warnings: 34 Is there a way to show the 34 warnings to find out what the problem is with the intput data file? I tried: mysql> show warnings; but it did not work.
View Replies !
View Related
|
TRACKER
