I Can't Get Info.php Working On PWS Win98 The Page Cannot Be Displayed
Can someone help me?
I have tried php-4.3.4-installer
I have tried php-4.3.4-Win32
If someone has PWS running PHP4 on windows 98
I would appreciate any help. thank-you
View Complete Forum Thread with Replies
Related Forum Messages:
Page Not Displayed!
I have a site in PHP with a page 'approveMembers.php' within 'approve' directory under the site directory. This site has been hosted on net. Now the problem is when i access this page from my machine that uses a proxy server to connect to the internet, the contents get displayed properly. However, when i use a machine that connects to the internet directly (without using a proxy), the contents do not appear in the page even though the status bar read 'Done' after loading the page. Code:
View Replies !
Page Cannot Be Displayed
OS: Windows 2003 Server Program: EasyPHP1.8 Changed port to 81 in httpd.conf, rebooted and everything.... 127.0.0.1:80 still connects to the index page 127.0.0.1:81 doesnt connect (Page cannot be displayed) 192.168.1.181:80 & 192.168.1.181:81 doesnt connect either (192.168.1.181 is the computers IP) Is there any configuration I have to do with Windows Server 2003? This is all after a clean install of the OS. Firewall is off (default) or anyone have any advice what the problem could be?
View Replies !
The Page Cannot Be Displayed!
I have a problem when try to upload a quite BIG file (more than ~600K, less than 600K is OK). My browser said : "The page can not be displayed" - in IE and "The connection was reset" - in Mozilla Firefox. Have someone found the problem like this before? And how can I solve it?? My very very simple code is:
View Replies !
PhpMyAdmin - Page Cannot Be Displayed
I programmed my config.inc.php file with the codes below. But i cant go to the website.. It shows an error msg, "page cannot be displayed" What haf i done wrong.. N i m actually not sure about my local host.. Cos i m using my school wireless network.. $cfg['PmaAbsoluteUri'] = 'http://www.example.com/phpMyAdmin-2.5.7-pl1/' $i = 0; $cfg['Servers'][$i]['host'] = 'example.com' // MySQL hostname $cfg['Servers'][$i]['port'] = '' $cfg['Servers'][$i]['socket'] = '' $cfg['Servers'][$i]['connect_type'] = 'tcp' $cfg['Servers'][$i]['controluser'] = '' $cfg['Servers'][$i]['controlpass'] = '' $cfg['Servers'][$i]['auth_type'] = 'config' // Authentication method (config, http or cookie based)? $cfg['Servers'][$i]['user'] = 'username' // MySQL user $cfg['Servers'][$i]['password'] = 'my_pass' // MySQL password (only needed // with 'config' auth_type)
View Replies !
&JAVA - Page Cannot Be Displayed
I have installed j2sdk1.4.2_14 to work with my php-4.3.9-3.15. And i have follow all the step from head to tail. Now, i suppose to just create a simple php coding on java function. When i exec the page...it did not show any error but just 'The page cannot be displayed'. I hava added a line of : export LD_LIBRARY_PATH=/usr/java/j2sdk1.4.2_14/jre/lib/i386/server:/usr/java/j2sdk1.4.2_14/jre/lib/i386 to etc/init.d/httpd. Seems not working as well.
View Replies !
CHMOD 777 - Page Cannot Be Displayed. Why?
I have placed a CHMOD 777 on a folder and now all of the files inside that folder return 'page cannot be displayed' error, an internal server error (500). I have tried on individual files as well.. the same thing happens. Anyone know what is going on?
View Replies !
Hiding Hyperlinks For Page Displayed
Can anyone point me in a direction to find a tutorial on writing a script that will hide, (not show) The text link for the home page if my vistor is on the home page. i have read a book and they have on th4ere but it only deals with changing the type of image not disabling it and hiding it from veiw.
View Replies !
Pagination Displayed In One Long Page
My site is a virtual pet style site where there are user shops and at the moment all items are displayed in one long page, not so great when theres over 100 products in one store. Below is a copy of the code. If anyone could please give me some pointers, Id really appreciate it. I've gone through tutorials but they seems to be to advaced for what I need and I simply get lost. Code:
View Replies !
Page Blank But No Errors Displayed
I have a script that's just returning a blank page. So I'm guessing I've got an error somewhere. In fact I know I have because if I comment out one or two classes, I get an error message coming up. But why do I get a blank page at first? How come it's not giving me an error message for my obviously faulty class? Code:
View Replies !
Flip Flop The Displayed Page
I want to test different content on a landing page to see which my visitors like the most. Version A is to be shown 50% of the time, Version B to be shown 50% of the time. So, visitor #1 gets shown Version A, visitor #2 is shown Version B, visitor #3 shown Version A and so on. My idea is that I would have some code that would say include(content-a.php) or include(content-b.php) depending on which is due to be shown next.
View Replies !
How To Limit Number Of Lines Displayed On The Page?
I just wrote this script to read information from a TXT file that contains list of JPEG files, and the list is rather huge. So I want to limit the number of displayed files to like 20 per page (with NEXT/PREVIOUS links to the next or previous 20), but I have no clue how to do it. Code:
View Replies !
Phone Number Is Not Displayed In The Paypal Page
I am using Paypal in my site. The problem is the phone number is not displayed in the paypal page, but am sending the phone number in a hidden value with the name "H_PhoneNumber". Can anyone tell what could be the problem? Why am not getting Phone number in the paypal page.
View Replies !
Linking Functions To Data Displayed On Page
I have a text input box, in which you can enter a user ID. You click 'find user' and this populates a table with this users details. So far pretty straight forward. What I want, is a set of functions relating to this user, such as a simple button: 'Delete User' (the functionality of which is self explanatory). Code:
View Replies !
Page Cannot Be Displayed While Attach Images To Posts
i am including the ability for users to attach images to their posts. Now they can attach more than one image. First time round. the image gets uploaded and everything works fine. second time round though. i get a 'page cannot be displayed' error. The address in the address bar is correct. i just cant see why its working first time and not second. Anyone experienced this before or myt know why its happening?
View Replies !
How To Control The Number Of Page Links Displayed With Pagination?
Does anybody know how to control the number of page links displayed with pagination? I mean like, with the tutorial on this site, if I had, say 50 pages of results, it actually creates individual links for page 1-50. How could I make it truncate say 1-5, and then an arrow to goto 6-11 and vice versa? Here is the code the tutorial uses for($i = 1; $i <= $numofpages; $i++){ if($i == $page){ echo($i." "); }else{ echo("<a href="$PHP_SELF?page=$i">$i</a> "); } }
View Replies !
Session :: Problems With This Web Page Might Prevent It From Being Displayed Properly
when i add php session <? session_start(); header("Cache-control: private"); // IE 6 Fix. ?> I just get this error "Problems with this web page might prevent it from being displayed properly bla bla". Of course am adding those lines just the first thing in each page b4 anything else. so am getting that error in pages that have template applied to it. and when i delete the session lines it just back to normal. So i dont get whats the problem with the session.. there is no other way of writing it. and the session is working already properly in another project on same computer. am using php & IIS.
View Replies !
Sessions And Redirects - Send Info From Page One To Page Two.
I have a two part form, each part on a seperate page. I want to send info from page one to page two. Thought ok, I use session variables. The problem is that they don't get sent to the second page. All works fine on my local testing server, but when I go live session varables don't show. Has this something to do with header? Is there another way to get to the second page? Code:
View Replies !
Email Me This Info Page From A Order Confirmation Page?
How do i make a "email me this info" page from a order confirmation page? Basically someone enters some info in a form, then on submission is comes to my email. After submission, i want to have a text area where they can enter an email address to have the info emailed to them if they wish. You can see the page here, you have to enter info first, the email nbox on the second page (process.php) is non fuctional.
View Replies !
Working With Sessions And Storing Credit Card Info Inside A Session
have a security concern working with sessions and storing credit card info inside a session, going to the payment gateway, redirecting back to my page and doing a soap connection and processing the order with the session variables, and then destroying the session afterwards. is it safe enough to store credit card information in this manner, can hackers get to this? cause its possible to view POST variables with a firefox plugin. or is it safer to write it to a temporary database table, do what i need to do and then delete the row?
View Replies !
Sending Page Info
for several different .php files (file1, file2, file3 ...) i want to have page numbering, ie, this is page 1, this is page 2... the files are accessed in different order order 1: file1, file2, file3 order 2: file2, file3, file1 but the page numbering should always be 1, 2, 3 regardless of actual file order. any ideas how this can be done?
View Replies !
Passing Info From One Page To Another
I have a dynamically generated list of check boxes with ids email1, email2, up to the end of the list of addresses. This list is then passed to the next page where all the addresses are concatenated and added to a database. At least that's the theory. I can't figure out how to dynamically get all the $_POST[emailx] variables, with x being 1, 2, to the end of the list.
View Replies !
Win98 And PHP
I have windows 98 and I would like to run PHP, I have PWS to run ASP but I would like to work towards javascript. I would work with ASP and VBScript but the problem is that I only have VB2005 EX ED. I got no books for VB at my home, but I have books on C++, Java, C#, Javascript, and much more.
View Replies !
Page Info Change On Submit
I have a menu on my site that is all pulled out of a MySQL database. So the links actually look like this: <a href="about">About Us</a> And when the user clicks on this link I want the page to go to the database and get the info for "about" and then refresh the page and display the info.
View Replies !
Opening A Page To Display The Right Info
I'm making a website where registered users can upload a photo as well as information. The main page will display all of the users' photos. When user1 clicks on, say, user5's photo i want a page to open up and user5's information. How do i do this? Every user has a username stored in the database along with their information and the url to their photo. Code:
View Replies !
PHP Pages Getting 404 Error, "Page Cannot Be Displayed"...
I tried putting this into the PHP Installation forum but don't get any answers or suggestions there so I'm going to try it here and hope it doesn't get moved. I'm on a Windows 2003/PHP 5.22 setup. I'm TRYING to upgrade from PHP 5.02 which did work on my server and quite well. I followed the upgrading and installation instructions layed out on the PHP.net set -- I still can't get it to work. The install dumped all the PHP related files under "c:program filesphp". I've ensured that path is in my windows PATH statement for my env vars. I've also verified that "c:program filesphpphp-cgi.exe" is in my Web Service Extensions listing in IIS and the status is set to "Allowed". From the command-line, I can execute my "test.php" file that has the phpinfo(); info function in it and it works fine. It's only when I try to use my web browser to access the php file that I get the 404 error, "page cannot be displayed". I know that IIS in general is working ok because I can point it to the default http://servername/iisstart.htm and it resolves to that page just fine. It's only when I change it to http://servername/test.php (which has my phpinfo()) function in it when I get the 404 error. My web server just doesn't seem to be interpretting PHP files anymore and I can't figure out why.
View Replies !
Stand Alone Win98?
how would i get php running with mysql on a windows 98 machine with out a server so that i could test my scripts after i create them.?
View Replies !
Parsing Info From Other Page (method POST)
- i want to get some info from the page XYZ to my page. XYZ page has a FORM where you can select DAY, MONTH, YEAR and you get the info about a day you selected. - now, if i want to grab the info from let's say 20. august 2002 my url will look like this: http://XYZ/file.php?day=20&month=8&year=2002. - THE PROBLEM is, their form has the POST method, which means, if i want to direct link the 20 august, it will bring me to the FORM page and not to DATE page. is there any ways to bypass this?? I REALLY NEED THAT INFO?!
View Replies !
Dynamic Content - Writing DB Info To A Page
I'm writing a website that works on similar lines as a dating site, where end users can enter their details and what they want to sell, which is then submitted on to a webpage, any people that are interested in that product, contact us and we then pass the lead to the person who is doing the selling. So basically teh site is acting as a middle man. I have done the database bit where the end user enters his details, we get emailed his details and his id (which is a an auto increment field) then there is a page called view.php which pulls up his details on a web page and there is then a submit and decline button. Teh decline button is the easy part, but the bit that I'm stuck on now is the submit part. And thus here is my question how do i write information that is held on a database to a webpage. But this webpage has to ADD and and not OVERWRITE what is already there as we want to create a listing? Code:
View Replies !
Pass Info Forward From A Redirect Page
I have a main page with 75% constant contents. I want to change the other 25% depending on what page calls the main page. Example: www.mysie.com/a.html www.mysite.com/b.html www.mysite.com/c.html www.mysite/x/y/z/mainpage.php Pages a, b, and c are redirect pages to mainpage.php How can I how can I open storya.txt in the mainpage.php when someone clicks on ~.com/a or storyb.txt if they click on ~ .com/b ?
View Replies !
HTML Presentation Page For Uploaded Info?
I've seen a lot of posts about uploading files, but not much about what happens afterwards. Can someone point me to a tutorial, post or book which will help me solve this problem: I'd like to have a form where users can upload a photo, add a short bio, put in some contact info, and have all of this information stored in a database (natch). Then I'd like for this form to take this user's data and put it into an html presentation template. Ideally, members would sign in and be able to modify their own profiles as well as view other profiles.
View Replies !
Passing This Radio Button Info To New Page.
I have my users choosing from several radio buttons on a page(page1). When they click "submit" they should be given a table of results on another page(page2). Depending on which one they choose an X will appear in the correct box. Code:
View Replies !
Getting Current Page Info Into The Query String
I have a drop down list in a form, in a PHP page, the form is displayed via 'echo'. The FORM ACTION tags looks like this: echo "<CENTER><FORM NAME='choose_lib' METHOD='post' ACTION='viewpix.php?ctPos=360&ctWid=109&hsp=1&loc= XXX '>"; When the user selects a name from the drop down list, which is dynamic, how can I get that variable into that ACTION url where it currently says XXX ? All I can think of is that I am going to need an intermediate page, and that doesn't sound very efficient.
View Replies !
Apache 1.3.14, PHP 4.0, MYSQL And Win98
I have installed and working Apache and php 4.0. I would like to get mysql working too. I ran the phpinfo file using PHP 4.0 and I did not get the MYSQL extensions in the resulting table. I subsequently - after changing my http.conf file - ran the phpinfo file using PHP 3.0.16 and got the MYSQL extension showing up in the table. Why isn't the mysql extensions showing up under PHP 4.0?
View Replies !
PHP4+Win98 And Sessions
I've tried PHP4build4, RC1, RC2 and 4.0.0 with Win98 but sessions doesn't work: I've got 2 pages: first_page.php3 <? session_start(); $myvar="test"; session_register("myvar");?> second_page.php3 <? session_start(); echo $myvar; ?> I've launched first_page.php3, then I've launched second_page.php3: the browser doesn't display anything (it should display the world "test").
View Replies !
PHP4 Installation Win98 + PWS
I can't get to work php4 on my windows machine,l i have tryed all the things that came in the documentation and it doesn't work.The error that I recieve trying to run a php is HTTP 500 Internal Server Error.
View Replies !
File Permissions In Win98
I just wanted to know if there was any way I could change my file permissions so I can use the fopen function in windows 98 using Apache and PHP 4.04???? I know how to do it for Linux but I need it for Win 98.
View Replies !
Win98 + Apache 1.3.up + PHP 4.3.up Something Wrong
I been first times setup. So Who have experience the Win98 + Apache + php (not run PWS or IIS) I begin download and installed the Apache. I test the run is working on browser (http://localhost) show the apache page. But Apache Console Running under the DOS Window say :- ===================================== [Thu Nov 20 15:13:49 2003] [warn] (2)No such file or directory: exec() may not be safe Apache/1.3.29 (Win32) running... ===================================== I expect that it. So, I shall the php installer from download. I try changed the httpd.conf under the Apache directory. Restart Apaches Console. I testing the (http://localhost/test.php), show error page say "HTTP - Error 400 Bad Request" also "HTTP - Error 404 Not found" I have tried times.... But unknown.... Apaches Directory - c:apacheapaches*.* PHP Directory - c:apacheapachesphpwin32*.* httd.conf -: (was add the line) ScriptAlias /php/ "C:/Apache/Apache/phpwin32/" AddType application/x-httpd-php .php AddType application/x-httpd-php .phtml Action application/x-httpd-php "/php.exe" I didn't change php.ini yet I copy and paste the "php4ts.dll" under to C:windowsystem from PHP What I have done that above ?
View Replies !
No PHP Error. Just "Page Cannot Be Displayed"
I was wondering if someone could explain why I'm receiving this error. It's like a 404 error but I think it might be something else. Basically, I have a page where a user inputs his email address. The system is supposed to look up the email address and send the associated password to that email address. It worked up until a few months ago. Note that the validation works. So, if the user tries to submit a blank text box, it returns an error. If the email address is not found, it returns an error "Email not found." But if the email is valid, it just dies. This code worked a few months ago when I initially wrote it....
View Replies !
PHP5 With MySQL 4.1 On Apache 2 On Win98
I am in the process of learning php. I am particularly interested in its uses with MySQL. I have Apache 2 and PHP5 both installed and working fine. I pasted a MySQLi example for opening and connecting to a MySQL DB into "hello.php" <?php $mysqli = new mysqli("localhost", "my_user", "my_password", "world"); /* check connection */ if (mysqli_connect_errno()) { printf("Connect failed: %s ", mysqli_connect_error()); exit(); } printf("Host information: %s ", $mysqli->host_info); /* close connection */ $mysqli->close(); ?> For some reason when I get: Fatal error: Class 'mysqli' not found in D:Apache groupApache2htdocshello.php on line 7 I installed PHP in "d:php" and added it to my path in my autoexec.bat. in php.ini: .... extension_dir = "d:phpext" .... extension=php_mysqli.dll I read all the posts at the bottom of the pages on PHP.net website where someone says "I had a problem and I got...yada...yada and did everything each of those posts said you had to do and it still won't work. The only thing left is how PHP needs compiled with a "--with" statement or something like that but I'm using the windows binary so that shouldn't be a problem... Is there some other problem it could be besides a problem with finding a dll or ini?
View Replies !
Start Up / Shutdown Mysqld In Win98
I can start the mysqld fine by running the following command: C:mysqlbinmysqld --standalone and I can shut it down fine with the following command: c:mysqlbinmysqladmin shutdown But does anybody know how to set this up in win98 so that it will automatically startup mysqld on startup, and automatically shut it down on shutdown/restart?
View Replies !
Win98 Apache And Php Install Not Wokring.
I have installed the latest Apache and PHP binaries (the PHP CGI executable release - not the ISAPI). I then configured the httpd.conf sciprt using the install.txt file from the PHP install and 2 reference books as guides. This got me to the point where I BELIEVE the PHP interpretor is kicking in for .php scripts. But when I try and browse the following page : <? php_info() ?> I get the following error : Fatal error: Call to undefined function: php_info() in e:/apache/htdocs/phptest.php on line 1 Code:
View Replies !
|
TRACKER
