Total Table Columns
I have a report that pulls data from a mysql table and generates a html table with the data. I need to sum up the columns into 2 separate fields I think I need to access the result from the query but do not know how. Code:
View Complete Forum Thread with Replies
Related Forum Messages:
How Do I Get The Total Records From A Table?
It also shows the total submissions. Right now, when you choose to view by a particular topic (for example, select a region - California) the total submissions only shows for those results (which right now is 1). I'd like to show the total results not just for California (which right now is 4). Code:
View Replies !
Table - # Of Columns
I have a question about understanding how to tell my page when to move down to the next row when displaying a result (a list). If I want to have for example a fixed number of columns (perhaps two or three.). I understand to put the TD command in for each column ... but how does the </TR> etc come into the syntax?
View Replies !
Max Columns In Output Table?
I am trying to restrict how many columns a table can have before it starts a new row. For example, lets say I have 12 images stored, I want the output table to be 3 rows of 4 images. How can I tell the code to start a new <tr> after 4 <td>'s have been been entered. I saw this code, but it does not work as I thought it would, it only restricts it to 3 <td>'s all together... maybe a variation of it would work? Code:
View Replies !
Dynamic Table With Columns
I am generating a dynamic table and everything works fine except I have the columns hard coded. I need to somehow determine if a column exists in the sense that there is a value in it other than NULL and then change the code below to generate the columns dynamically. Here is my current code: <table border=0 align=center cellpadding=5> <tr> <td><b>Land</b></td> <td><b>Acres</b></td> <td><b>$/Acre</b></td> <td><b>$/Mile</b></td> <td><b>Survey</b></td> <td><b>Township</b></td> <td><b>Range</b></td> <td><b>Section</b></td> <td><b>Block</b></td> </tr> <tr> ....
View Replies !
Null Columns Vs Seperate Table
If i have a table and i know that the majority of records for a column are going to be null should this be in a seperate table or wont it really matter. For example - i have a client table with name, phone, email, fax etc and i know that the majority of entries wont have a fax number should i store this in a seperate table (client_fax)? I know that probably 95%+ wont have a fax number so how do you way up the pros and cons of having many null entries or making things more complicated by introducing a new table? I try to normalize my tables to 3NF, but unsure how null columns come into play. Is there a "rule or thumb" of how many % of fields can be expected to be empty (0%, 20%, 70%, 99%) before a seperate table should be introduced?
View Replies !
Table Results Columns Rows
I am having trouble implementing my coding to work with the desired results. I am calling up a total of ten thumbnail images to appear in a table. I would like these to be in two rows of five. The code below will produce the thumnail images in a table, but all ten are in one row. How can I break this up so that after five images it will start a new row? Here is the code I am using now to show the thumbnails. Code:
View Replies !
Math Between Table Columns And Updating Values
Basically what i want to do is simple math. I want to pull the value of one column add a percentage to it and update another column with that new value. column a + 55% = column b updated. I have 12k prices to update, other wise this would probably be easy.
View Replies !
Getting Results To Display In Two Columns Of A HTML Table
How can i get the following script to display in two columns of a HTML table? At the moment i have it displaying in one column. If there are 5 results from the DB then the left HTML table column will display the 1st, 3rd and 5th result. The right HTML table column will display the 2nd and 4th results. Code:
View Replies !
Print Table (4 Columns 2 Record Sets)
I am trying to print a table of prices. I am storing a retail price and a wholesale price in a table productpackaging which is structured like: pdpackId ProductId as int PackageId as int Pcode as varchar RetailPrice as Decimal SellPrice as Decimal HoldPrice as Decimal etc The Pcode field tells me "RT" for retailer or "WS" for wholesale pricing. I want to query this table and print an html table with 4 columns the first for the retail labels - the 2nd for the retail prices - the 3rd for the wholesale labels and the 4th for the wholesale prices Code:
View Replies !
Dyanically Create Table Rows And Columns
I'm trying to create a day view for my calendar. I need to have time slots table rows and the columns need to be the roomnames, which are stored in my db. I would like to query my events db and dynamically build a table shading the tables different colours dependant upon room usage. I have attached screenshot of how I would like the page to look. Can anybody tell me how I can dynamically create rows and columns to create a table?
View Replies !
Adding Columns To A Populated Table - Bad Practice?
I got a scenario where i need to design a table for userProfiles. Currently the profile stores userID's (foreign key - there's a user table which stores the userIDs), and against each userID i need to store the number of times the user has accessed each of the available services offered. Code:
View Replies !
Create Dynamic Table With 3 Columns And Unknown Number Of Records?
I'm trying to create a table with only 3 columns, but the problem is I don't know how many records will populate the table so need it to automatically create <tr> and </tr> tags every 3 records. How best can I do this? At present the code below just lists every single record in one continuous row - but as I said, I want to only display 3 records per row. Code:
View Replies !
Session - Sort ALL The Columns Then Transfer That Sorted Table To A New Page For Printing.
I'm not fully conversent with sessions and I suspect they are the answer to this problem but I cannot figure this one out yet. I have a table with data drawn from a database and some calculated on the page. e.g. 1 Name | Score 1 |Score 2 | Average Score where average score is calculated on the page. 2 Name | Score 1 |Score 2 | Average Score 3 Name | Score 1 |Score 2 | Average Score 4 Name | Score 1 |Score 2 | Average Score etc. Can I carry this data to a new page without having to call from the database again. The reason is that I want to sort ALL the columns (which I can do already) but then transfer that sorted table to a new page for printing.
View Replies !
Search Any Of The Columns In The Table Called "cars".
I'm using the following code to query a MySQL database: $query = "SELECT * FROM cars WHERE model LIKE '%".$search."%' ORDER BY id"; but I don't want to just search the field "model" I want to search any of the columns in the table called "cars". I've tried this: $query = "SELECT * FROM cars WHERE * LIKE '%".$search."%' ORDER BY id"; but that doesn't work. Can someone help me with the right code I am looking for?
View Replies !
Insert Values - Table Has Four Columns To Insert Into
I have a bunch of information that I want to insert into a table insert into TABLE values ('hello','I','am','lost'); pretend that the words that are being inserted are coming from a form for another page. In he case I above I have declared that the table has four columns to insert into. What if I do not know how many columns there are?
View Replies !
Total
I have a database table with many entrys, is there a quick way of adding how many entrys there is?
View Replies !
Total ?
I have a table (sales) with 3 columns(id,name,price) the price column is integer, id = 1 name = Car price = 10000 id = 2 name = Car 2 price = 15000 I want to calculate the (price) columns in which the total = 25000?
View Replies !
Total Nub
I heard that I'm supposed to set up a database and I can either create it myself with strings of PHP or something like that or I can download something that I'd log into. Now someone point me in the right direction so I can get on my way with learning PHP.
View Replies !
Adding Row Total Value
I have a database with a table called monthlypayment.. 2 fields in that are id, and monthlypayment I need to add monthlypayment for a sum for each id. Id is linked with other tables on the database as well (cars). so if I brought up the monthly payments for car id 12, I need to show all entries, and at the bottom, I need to add them together. "It's right at the end of my fingertips.(haha)" I know this is simple, but I'm drawing a blank.
View Replies !
Total Without And With A Condition
How do I get the total without a condition and the total with the condition at the same time? This is my mysql table: id datetimeconfirmed customerid amount 1 2007-08-14 06:19:03 1 12.25 2 2007-08-06 06:19:19 1 15 3 2007-08-02 06:19:41 2 5 4 2007-08-07 06:19:58 2 7.25 5 2007-08-09 06:36:41 3 25 If I run this query: select customerid, sum(amount) from test group by customerid I get this result: customerid sum( amount ) 1 27.25 2 12.25 3 25 If I run this query: select customerid, sum(amount) from test where datetimeconfirmed < ��-08-08' group by customerid I get this result: customerid sum( amount ) 1 15 2 12.25 Which query do I have to run to get this result? customerid sum( amount ) total 1 15 27.25 2 12.25 12.25 3 NULL 25
View Replies !
Running Total
I would like to keep a running total of miles used on a truck. The user will be allowed to enter the total miles on the truck after every use but I want to be able to keep the total miles updating after every user submits their total how would I go about doing this.
View Replies !
Keeping Total
I have a loop that runs through the reults of a query and it does $tot_feet += $feet(which keeps a running total). For some reason it will not process 110 rows of data so I had to break it down into three seperate queries with three seperate loops. I am wanting to keep a sum of all the loops. Im programming I would just create a global variable and use it but how would I do it in php? Since $tot_feet is withing the loop the value cannot be accessed outside the loop due to scope.
View Replies !
Total Value Of Database
Here's my code PHP Code: $query = "SELECT countries, sum(count) FROM statistics GROUP BY countries"; $result = mysql_query($query) or die(mysql_error()); $num_results = mysql_num_rows($result); while ($row=mysql_num_rows($result)) { echo '<p>Total Number of Participants: '.$row['sum'].'</p>' }
View Replies !
Getting Total Days.
We have a notice form which allows people to tell us if they're going to be for a long time, containing the start day/month/year and end day/month/year. Code:
View Replies !
Total Records
I think maybe I just need a fresh pair of eyes to look at this, this seems like it should be an easy fix, but I can get my head to think about it. PHP Code: $query1 = "SELECT COUNT(*) as Num FROM COONRAPIDSRECOMMEND WHERE CLOSEDATE > ��-01-01'";                             if($selectmake ==Ƈ'){                           $query1.=" AND MAKE IN ("".$selectedmakestr."")";                           }                           if($selectmodel ==Ƈ'){                           $query1.=" AND MODEL IN ("".$selectedmodelstr."")";                           }                           if($selectyear ==Ƈ'){                           $query1.=" AND YEAR IN ("".$selectedyearstr."")";                           }                           if($selectcity ==Ƈ'){                           $query1.=" AND CITY IN ("".$selectedcitystr."")";                           }                           if($selectstate ==Ƈ'){                           $query1.=" AND STATE IN ("".$selectedstatestr."")";
View Replies !
Total Queries
Say if I have a page that has 5 queries on it, is there a way to calculate that without having to manually write "This page used 5 queries". A way that if I added a 6th query it would automatically update?
View Replies !
CALCULATING Row Values To Get A Total
My problem is,, that i have a PHP script that displays a table the table has the following colums firstname,surname,boots,hospital,woolworths,br,other, total the firstname and surname are grabbed from the database when the page loads, what i want is for the user to enter values in the boxes under the colums boots,woolworths,hospital etc then when they click submit,the page is refreshed, data submited into the database, bu them redisplayed in the table the values are calucated and each user is then given a total number of hours worked at those places. im really stuck guys, havent a clue how to go about this. so an example would be F S boots Hospital woolworths other total JOE BLOGS 0.8 0.8 0.8 0.8 HELP me 0.1 0.5 0.5 0.5 submit is pressed, data entered into the database, then page redisplayed with the total column totaled up. F S boots Hospital woolworths other total JOE BLOGS 0.8 0.8 0.8 0.8 3.2 HELP me 0.1 0.5 0.5 0.5 1.6
View Replies !
Total Result Php Mysql
PHP Mysql limit the result to 5 I can display the 5 results using a do & while which it ok. I want to list the total or all the results without using a do or while this is so I can combine the results and remove duplicate words from the total results I.E. Do & While row result 1 this is the top 2 this is the bottom 3 this is the middle 4 this is the end 5 this is the finish This is what I want to do: result this is the top this is the bottom this is the middle this is the end this is the finish modified result:: this is the top bottom middle end finish
View Replies !
Counting Total Kb In Directory
im trying to create a script that allow me to see how much space has been used by a certain directory and to calculate this in Kb (kilobytes) or Mb (megabytes), i have search the forum and the web....but can't find anything really upto the job.
View Replies !
Total Login Time
How can I know that when a user is logged in? Like I want to store each login and logout time of each user in a database.
View Replies !
Pagintion Page Of 15+ Total
I have a pagintion page of 15+ total...now I dont to want display all the page numbers. I want something like: Pages: 1 2 3 4 5 ... 12 13 14 15 How would I do this in a for loop?
View Replies !
Finding Cart Total
I have a question concerning my cart total. I need to get the total I have my products and cart in two separate tables: products and cart. In my cart table, I have stored the productid to tie it to the products table, userid from the session variable to tie the products in the cart together, and quantity. In my products table I have the price for the product. What would be a formula I could write to get the complete total dynamically? Because I could have one product up to 20. If you need more info, let me know. I thought about calculating the individual totals and then adding them, but I don't know how to do that.
View Replies !
Count Total Iteration
I got stuck trying to count total iterations for two loops. My code is as follows: for($i=1; $i<10; $i++){ echo $i; for($j=1; $j<5; $j++){ echo $j; } } it's gonna produce results as follows: 1 - 1,2,3,4 2 - 1,2,3,4 etc.. How to make this script output: 1,2,3,4,5,6,7..35,36?
View Replies !
Count Total Rows
I have a query and a loop where I output the results. Something like this: PHP Code: SELECT Â Â Â Â Â t1.var1, Â Â Â Â Â t1.var2, Â Â Â Â Â t2.var1, Â Â Â Â Â t2.var2 FROM t1 LEFT JOIN t2 ON (t1.id= t2.id) WHERE Â Â Â Â Â t1.var1 = $value I need to count what's the total number of rows I output.
View Replies !
Total Battles Fought
i wanna do a area where it says: total battles fought. i have a table, which stores battle logs with a id, winner, and loser columns. how do i grab the row with the biggest ID number(this way, i can use that as battles fought).
View Replies !
Total Rows By Date
I have a DB that records visits to my site. What I would like is a single SELECT statement that will show total visits in the past day, week, month, year. I know how to do it for a single category (ie SELECT * FROM Data WHERE Date < NOW() - interval 7 day) but not four at once. I would like to do it without 4 different select statements. And if COUNT () is the answer can I get an example. I can never get COUNT () to work right.
View Replies !
Total Clicks For Each Image
i have a website with some images and would like to keep track of every click each image receives. i dont don't know how to use php and mysql at all, so i hope any of you can give me the code to insert in my pages or a link with a script to copy-paste in my website. i just need the total clicks for every image.
View Replies !
Total Space Left
im writing a file management system, that allows members to upload files, each member is assigned a user level which has a specific Quota of space on the server, what i need my script to do is show the total amount of space currently used. Code:
View Replies !
|
TRACKER
