Connect To Pop3 Mail Server
I have a piece of code that connects to a mail server running on the same machine. It all works fine but it just takes an age to connect to the mail server, like 30 seconds or so.
Looking at the log for the mail server, I noticed the following lines at the beginning of each request:
[Date / Time] CAPA
[Date / Time] -ERR Unknown Command
[Date / Time] AUTH
[Date / Time] -ERR Unknown Command
Could this be the reason that it takes so long to connect to the mail server? And if so is it possible to suppress certain commands sent to the server if they are not required?
The PHP code I use to connect is simply:
$mbox = imap_open ("{mailserver:110/pop3}INBOX", "username", "password");
And then imap_close($mbox); to clean up.
View Complete Forum Thread with Replies
Related Forum Messages:
Use Fsockopen To Connect To Pop3 Mail Server
I am writing a application which use fsockopen to connect to pop3 mail server and check mails. It works fine for me. But, Now i am having problem with checking same server. I mean when i try to connect to example.com from a script running at http://www.example.com/myscript.php it doesn't connect to server gives PHP Code:
View Replies !
Connect To Mail Server
I got this script from a tutorial somewhere, its for conecting to a mail server and reading a list of the messages there. but for some reason it wont work. at all. the page just stays blank. (white). PHP Code:
View Replies !
Mail Function - Can Not Connect To The SMTP Server
My host did something a couple of months ago to their mail server to make it more secure. YOu now have to delare more variables or something. NOw my PHPlist will not work because it can not connect to the SMTP server or something like that. JUst wandering if any of you have run into the same problem and could tell me how to fix it?
View Replies !
Connect To The Server With A Password And Username And Then Allow Mail() Commands Normally.
It is with smtp authorization. I have been told that it is not possible. But I saw a script that made it possible. But I have users that have directories on my site and would like them to be able to use the mail() function without a complicated script. My plan was, to find some way to connect to the server with a password and username and then allow mail() commands normally. This file would be in the include directory so all the users would need to do is have a require('mail.php'); before their mail script and it would work. Does anyone know how to do this, Or can you refer me to a free mailer that doesnt use authorization?
View Replies !
Failed To Connect To Mailserver - Config Settings For The Mail Server
I am trying to send an email through a web form but I am getting an error. I am trying to use windows xp on my local machine. Warning: mail() [function.mail]: Failed to connect to mailserver at "localhost" port 25, verify your "SMTP" and "smtp_port" setting in php.ini or use ini_set() in C:wampwwwsendmail.php on line 19 Can someone tell me how to fix this. Here are my config settings for the mail server..... [mail function] ; For Win32 only. SMTP = localhost smtp_port = 25
View Replies !
Script To Connect To Delete Contents Of A POP3 Mailbox
I have written a PERL script that I can run through bash, that will take in a mail server address, username and a password, login and then delete all of the mail contained within the user's mailbox. Now I've battled to create a web interface so that my non-linux colleages can use easily wherever they happen to be, but just cannot get to work. So, I decided it would be easier to use PHP to create the script and use $_POST to grab the address, username and password from a form and then process the connection/deletion.
View Replies !
Php Mail() Function Doesn't Send To Pop3 Mail Address
I'm writing a registration script for een webhosting company but the mail() function i used works only for hotmail addresses and not for pop3 email accounts, it also works for other not pop3 email accounts, does any one know what i should do to make this work. I used the same method before on an other server and there it worked perfectly.
View Replies !
How To Connect Remote Site - Can't Connect To MySQL Server
Lets say, i have two php sites named Site-A and Site-B. I want to use MySql Datbase of Site-B for Site-A. Generally i use : $Host="localhost"; $User="username"; $Pass="password"; $DB="databse"; mysql_connect($Host,$User,$Pass); mysql_select_bd($DB); When i connect to Site-B database from Site-A what will be the $Host name? I have tried with: $Host="www.mysite.com"; but it shows the warning: Warning: mysql_connect(): Can't connect to MySQL server on....
View Replies !
Pop3 Mail
How does one specify which smtp server, (POP3), php should use when sending a mail using the PHP Code: mail() function.
View Replies !
POP3 Mail Access
I am trying to code a script that connect to the pop3 server connect it and get the no of mail counts. For this i try imap_open function but server when i run the script i got undefine function error. Next I try searching this forum find a code for the socket connection but that too give error that gethostaddress fails error for the php complier. I need to connect through the domain name and not through IP address. My application is actual let the user now the count of mails in his pop3 accounts like gmail account has x mails your personal domain has y mails.
View Replies !
POP3 Mail Boxes
PHP script that will connect and read mail from a POP3 box. I need to read the POP3 and populate a database with the senders email, receivers email, date sent, date received, subject, and message. I also want to leave the mail on the server, and flag them somehow so next time the script runs it does not extract the same message twice.
View Replies !
PHP Read Pop3 Mail Account
I'm after a quick and easy way to read the content of a pop3 mailbox. I don't need anything fancy, just a way to list the date/sender/title, and then when selected, display the content of the message. I'd also like the mail to remain on the server to be downloaded properly into a mail client later. It doesnt even need to be capable of sending email at the moment - just reading it. It's so that a friend of mine can check her email online to find out her exam result next week while on holiday.
View Replies !
Incomming Pop3 Is Mail.mydomain.com
I have webmail on my server and it says my incomming Pop3 is mail.mydomain.com i tried to do <?php $port = "{mail.mydomain.org:110}"; $user = "admin@mydomain.org"; $password = "*****"; // To connect to an IMAP server running on port 143 on the local machine, // do the following: $mbox = imap_open($port, $user,$password); ?> and i get a stream not found error.
View Replies !
Programmatically Create POP3 / IMAP Mail Accounts Using PHP On Linux?
I want to get some help for programmatically create POP3 / IMAP mail accounts using PHP on Linux? , actualy im trying to develp a real email system like hotmail, this might be easy for you experts but getting difficult for me, im easily able to send Email to other domains but having problem to understand email Inbox and automated email account creation at my domain ( at sign up time ).
View Replies !
Could Not Connect To MySQL: Can't Connect To Local MySQL Server Through Socket
To connect to a MySQL database, hosted on my machine, an iMAC G5 with OS 10.4, I am using the following code: $dbc = mysql_connect ('localhost', 'guestuser', �') OR die ('Could not connect to MySQL: '.mysql_error() ); However, I receive an error message: Could not connect to MySQL: Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2). MySQL server is running, and user name/password are valid.
View Replies !
Connect To MySQL - Can't Connect To Local MySQL Server Through Socket
I've finished coding php, run it localhost and uploaded to my Apache server with Linux OS. However, I'm seemingly unable to connect to mysql at the server side. and received the following message: Could not connect to database: Can't connect to local MySQL server through socket '/tmp/mysql.sock'(111) What's this message abt? I tried to get into MySQL without php on the server. and received the same message at the console.
View Replies !
Mail() Connect Error
im having some trouble getting the mail() function to work. this is the error message returned: Warning: Failed to Connect in c:/apache/apache/htdocs/turkey/turk_login.php4 on line 36 line 36 is where the mail() function is written. i am using win98 with apache and these are the settings for the mail function in my php.ini SMTP = localhost sendmail_from = admin@localhost.com
View Replies !
I Cant Connect To My Apache Server
I installed php-4.3.3, mysql and apache server 2.0.47. but I can not connect to my apache server from my other computer, i use static ip for my server, set ip address for server name on httpd.conf, setup sua server on router. do i miss something here?
View Replies !
Connect To Php3 Server
I'm trying to write a small application that should connect to a pop3 server, and download all mails, but I'm having some small problems. I've checked the php manual, and what I have understood I should use is the imap_open() function? I've tested: $inbox = imap_open("{mail.test.com/pop3:110}", "test", "test") or die("Error"); echo "It Works!!"; But I get an error message that says that the imap_open() function doesn't exist? My phpinfo() says that mod_imap is a loaded Apache module. What am I doing wrong? And how can I fix it?
View Replies !
Can't Connect To SQL Server Via ODBC
I just installed PHP 5.1.4 with SQL Server 2005 on my laptop. PHP is running fine and so is SQL Server 2005. When I try to connect to SQL Server from my my PHP code I get this error. Warning: odbc_connect() [function.odbc-connect]: SQL error: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified, SQL state IM002 in SQLConnect in C:Inetpubwwwrootindex.php on line 5 Here's my connection string that is causing the error $connect_id = odbc_connect("Driver={SQL Server};Server=mydbname;Database=myDB","myUser", "myPass");
View Replies !
Using PHP To Connect To MYSQL Server
I am new to PHP and MYSQL. I recently installed both PHP and MYSQL (the community edition) on my computer and I have been trying to use PHP to connect to and access MYSQL (instead of using the MYSQL command line). I used the mysql_connect() function on a test script but I am getting the following error message when I test the script. Warning: mysql_connect() [function.mysql-connect]: Access denied for user ' '@'localhost' (using password: YES) in filename on line 10. I understand that I am being denied access because I have not submitted the right credentials. However, I am testing this code on my local computer where I have full privileges. What might be the reasons I am getting this message? What are the possible solutions? Do I need to configure mysql such that it recognizes that I am using it on a local computer?
View Replies !
Connect To Apache Server
i need a script that can access files from my machine to another (remote)machine. how do i go abt it. Connect to the Apache server tha's running from a remote computer?
View Replies !
Can't Connect To MySQL Server
I am getting this error, while try to connect to mysql, what might be the problem, I tried to download other version, all are giving me the same error. ERROR 2003: Can't connect to MySQL server on 'localhost' (10061) How can I correct it?
View Replies !
Connect To A MSSQL Server
I am using PHP to connect to a MS-SQL Server. In my SQL statement this snippet of code is giving me error: ... DATEPART(m, Changedate) ... more statements... I looked at online docs -Microsoft, the syntax is correct as far as I could tell, but this is where the SQL errors out... The variable Changedate is a date and time column as: 2003-11-30 00:00:00
View Replies !
Mysql_connect - Can't Connect To The Server
i have installed Apache 2.0.52 + mysql 5.0.16 + php-5.1.0 + phpMyAdmin 2.6.4-pl4 exactly how it is described at but i can't connect to the mysql server. for example this script that i wrote only prints "1" And thats why i think that i can't connect to the server <?php echo "1"; $db = mysql_connect("localhost"); echo "2"; ..... ?>
View Replies !
Connect To MySql Server
I have MySQL database in my web server. Now I have to create a form (in my website)to allow user enter data and then the data will be store in the MySQL database. In the same website, the data in the database will be display out for other user. Can I know, how to connect my website to the database when user enter their data? Any guide or example? Any tutorial?
View Replies !
Connect With The MySQL From A Different Server
I need connect with the MySQL from a different server, if tried everything and it's still not letting me, through cpanel I allowed the host to access the mysql, and I'm trying to connect like this: mysql_connect("11.111.1.111", "username", "password"); it's returning the error: "Warning: mysql_connect(): Lost connection to MySQL server during query in /home/awesomea/public_html/csp.php on line 6" iv'e also tried connecting to ports: 11.111.1.111:3306 and its returning the same error.
View Replies !
Connect To Database From Another Server
the correct procedure to connect to a mysql database on another host? I have 2 websites on different hosts (servers) and would like to use the records stored on one database on another website. I used $db_host= "www.mywebsite.com" instead of "localhost" and it worked fine for a day now it gives me a 'Lost connection to server' error constantly.
View Replies !
Connect To Exchange Server
I need to connect to MS Exchange Server and get any email with attechments. Use of IMAP and POP3 are not allowed on this Exchange Server. Have anybody any idea, how can I resolve this problem with PHP?
View Replies !
Mail() Failure To Connect To Mailserver
I have wrote a simple mail script which was working fine - when I moved it to a different server I get the error: - Warning: mail() [function.mail]: Failed to connect to mailserver at "localhost" port 25, verify your "SMTP" and "smtp_port" setting in php.ini or use ini_set() in E:homeproject32sendmessage.php on line 219 code:
View Replies !
How To Connect MSSQL In Remote Server
I try to connect my mssql DB in remote server from localhost. But it fails to connect. The connection succeed only if i connect a mssql DB present in localhost. I can guess, this is due configuration settings in MYSQL my.ini But i dont know what necessary changes to be made inorder to connect a mssql DB in remote server from the localhost.
View Replies !
Can't Connect To Remote MySQL Server Using PHP
i am trying to connect to a remote mysql server through php. Here's the code: mysql_connect("my.hostname.edu", "username", "password") or die (mysql_error()); mysql_select_db("db_name") or die ("unable to select db".mysql_error()); $r1 = mysql_query('SELECT * FROM table') ; Using the mysql prompt on the remote server, the mysql -h -u -p works just fine with the parameters i've specified here. According to the user table I have the proper permissions. I just can't figure out what could be preventing the connection here, although I am no expert...can anyone help?! BTW, I am using PHP 4.4.1 and mysql 5.0.
View Replies !
PHP With MS SQL 7 Server Service Pack 4 - Cannot Connect
I have PHP 4.3.1.1 running on Windows 2000 Server with IIS 5. This connects to an MS SQL 7 server running on a seperate NT4 box. Recently, this SQL7 Server had SQL7 Service Pack 4 applied to it. After this Service Pack, the PHP apps could no longer connect to the database. Warning: mssql_connect() [function.mssql-connect]: Unable to connect to server: <mySQLServer> in <myPHPapp.php> on line 12. From what I understand, SP4 broke something in named pipes connections, and the fix is to update the client to MDAC 2.7 or later. This update was applied to the PHP server, but PHP still cannot connect. Anyone else run into this?
View Replies !
Ldap-start-tls To Connect To AD Server
I try to use ldap-star-tls to connect to a win2003 domain controller and browse AD. $ds = ldap_connect("ldap://$ad_server/") ,"389"); // Connect to an LDAP server echo $debug?"<BR>LDAP Connection handler:$ds<BR>":""; if ($ds == 0) { echo "<H1>Cannot connect to LDAP server to authenticate</H1>"; echo "<H3>Use the browser back button to continue</H3>"; exit; } else { if (!ldap_set_option($ds, LDAP_OPT_PROTOCOL_VERSION, 3)) { die ("Failed to set LDAP Protocol version to 3, TLS not supported."); } if (!ldap_start_tls($ds)) { die ("Ldap_start_tls failed"); } if (ldap_bind ($ds, $serv_user, $serv_pass)) { # Bind Ok The result is: LDAP Connection handler:Resource id #2 Warning: ldap_start_tls() [function.ldap-start-tls]: Unable to start TLS: Connect error in C:WEBROOTad.php on line 30 Ldap_start_tls failed
View Replies !
|
TRACKER
