PHP :: Installing Php With Curl On Solaris 8 Problem

Linux, Php,cvs, Curl Installing Problem
I checked out openssl,mm,apr,apr-util,apache 2,curl,libxml and php
from cvs.

php couse an ERROR

I did the following steps:

export ORACLE_BASE=/usr/local/share/oracle/
export ORACLE_HOME=/usr/local/share/oracle/OraHome1
export ORACLE_DOC=$ORACLE_BASE/doc
export ORACLE_SID=udb
export TWO_TASK=udb.suchtreffer.de
export PATH=$PATH:/usr/local/share/oracle/OraHome1/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export CLASSPATH=/usr/local/share/oracle/jre:$ORACLE_HOME/jlib
export NLS_LANG='ENGLISH_UNITED KINGDOM.WE8ISO8859P1'
export ORA_NLS33=/usr/local/share/oracle/OraHome1/ocommon/nls/admin/data

openssl:
cd /usr/local/src
rsync -rztpv --delete rsync://dev.openssl.org/openssl-cvs/
/usr/local/src/openssl-cvs-rsync/
cvs -d /usr/local/src/openssl-cvs-rsync co openssl
cd ./openssl
config no-idea no-threads -fPIC
make
make test
make install

mm:...........

View Replies !

Recompiling - Installing Curl, Mcrypt, And A Few Other PHP Libraries
I recently followed some guided instructions on downloading and installing curl, mcrypt, and a few other PHP libraries, all of which installed without much difficulty. However, they're not working with PHP.

I was told in order to accomplish this, I need to recompile PHP. My question is, how exactly do I do that to encompass the new libraries I need but also keeping the old ones? All the tutorials I've found on this just seem to get to this point and dwindle. Since I'm not a server guy, this is always where I get lost.

View Replies !

Step By Step Guide On Installing Curl
I've read through the forum looking for step by step guide on installing curl. Everyone seems to be saying "compile php with curl", get a couple of files, paste in this that folder. Code:

View Replies !

PHP 5 On Solaris 5.9
All seems to have installed OK but when I add the lines to Apache as below
it gives errors.

LoadModule php5_module libexec/libphp5.so
AddModule mod_php5.c

Syntax error on line 241 of /usr/local/apache/conf/httpd.conf:
Cannot load /usr/local/apache/libexec/libphp5.so into server: ld.so.1:
/usr/local/apache/bin/httpd: fatal: /usr/local/apache/libexec/libphp5.so:
open failed: No such file or directory
/usr/local/apache/bin/apachectl start: httpd could not be started

AND

Syntax error on line 247 of /usr/local/apache/conf/httpd.conf:
Cannot add module via name 'mod_php5.c': not in list of loaded modules
/usr/local/apache/bin/apachectl start: httpd could not be started

PHP seemed to install OK and I search for these modules but they cannot be
found. Apache is 1.3.27

View Replies !

Solaris IDE
im kicking around the idea of purchasing a sparc workstation because:

1) they are really cheap on ebay.
2) i always wanted to give one a shot.
3) they are really cheap on ebay.

Since i do php development, is there any decent IDE for php development out there that will run on sparc sunos?

anyone doing development on a sparc? I'm looking at something like a dual CPU sparc 1000 (dual 750's), and im also curious as to the performance compared to a windoz pc.

View Replies !

Compiling PHP On Solaris
Not sure if this is the best place to ask this,

I am trying to compile PHP 5.2 on a Solaris 9 system. I need Oracle DB
support so can't use the pre compiled packages on blastwave as I don't
think anyof them include Oracle.

The configure script is:
../configure --prefix=/usr/local/php-5.2.0
--with-apxs2=/usr/local/apache-2.0.55/bin/apxs
--with-mysql=/opt/sfw/mysql
--with-pear
--with-libxml-dir=/opt/csw/
--with-config-file-path=/etc/php5
--with-curl
--with-dom
--with-zlib
--with-oci8=instantclient,/usr/local/oracle/instantclient_10_2
--with-gd
--with-jpeg-dir=/usr/sfw/lib

And I get the error:
checking for the location of libjpeg... /usr/sfw/lib
checking for the location of libpng... no
checking for the location of libXpm... no
checking for FreeType 1.x support... no
checking for FreeType 2... no
checking for T1lib support... no
checking whether to enable truetype string function in GD... no
checking whether to enable JIS-mapped Japanese font support in GD... no
checking for fabsf... no
checking for floorf... no
configure: error: libjpeg.(a|so) not found.

BUT

[/usr/local/src/php-5.2.0]# ls /usr/sfw/lib
<snip>
libjpeg.so libjpeg.so.62

So why is it complaining? Does anyone know? I am puzzled why it bales
out after the "checking for floorf... no" line and not straight after
the libjpeg line 9 lines above.

I am using gnu gcc and ld.

View Replies !

Where Can I Get The Sun OS (Solaris) PHP Installation ?
Where can i get the installation files for Sun OS?

View Replies !

Trouble On Solaris 8
I'm installing Apache 2.2, PHP 5.04, and mySQL 4.0.21 on a Solaris 8
machine using prebuilt binaries from sunfreeware.com.

My apache install went smoothly - the only thing I'm having to work
around is an inability to use /usr/local - it's an NFS mount to a
central image, so I'm installing in /opt/local.

After installing PHP and modifying httpd.conf, I get the following
error on startup:

httpd: Syntax error on line 110 of /opt/local/apache2/conf/httpd.conf:
API module structure `php5_module' in file
/opt/local/apache2/modules/libphp5.so is garbled - perhaps this is not
an Apache module DSO?

Now, I have to confess that I don't have mysql installed yet, but I
would think that simply loading the php module wouldn't require this,
would it?

A search for this message shows one other user has seen it recently,
but no resolution online.

No hint in /var/apache/logs - no mention of php at all in any of the
logs.

Any clues as to what could be causing this?

View Replies !

PHP Slow On Solaris
Does anybody knows why php runs so damm slow on solaris. PHP works fine, but if you use the array function it get really slow. everyone could try it on different platforms.

fill a array with 100.000 elements in a loop and you will see what i mean. debugger output shows that php ist trying to get memory for each element. --> anybody know how to tune this in solaris or php? Code:

View Replies !

With Java On Solaris
This is my system configuration

OS Sun Solaris SPARC 8
Apache version 1.3.26(Unix)
PHP version php-4.1.0
java version j2sdk1.4.2_14 for soalris

i am trying to build php with java support but when i try to configure it with follwing command:

./configure --with-apxs=/usr/apache/bin.paxs --with-java=/usr/j2se --with-config-file-path=/etc --with-openssl=/usr/local/ssl

then make
and then make install

everything goes well without any error. but at the end i dont find any php.ini file in /etc and if i copy it from the distribution of php and edit the file with java class path and library path tha php page using java class doesnt work. can anybody provide me detailed step on how to do java integration in php on solaris.

View Replies !

SPARC And Solaris 10
I'm being moved from a windows platform to a Unix platform due to some corporate restructuring. I've been coding .asp pages and was about to move from .asp to .php on windows.

Can you tell me: i know that PHP runs on the platform SPARC and Solaris 10, but does it require Apache or can it run on the native Solaris web server?

View Replies !

'rsh' To Solaris 8
When I ran remote shell to a Sun Solaris 8 box from W2K box, the DOS' CMD window popped up and stayed there until CGI timeout. I had to kill the window by clicking on 'x'. After that it displayed CGI timeout error. What was going on? PHP script on Windows 2K:

<? php
/* Call a script on a remote unix box to display the name */
system <"rsh remoteunix -l thisuser "/mybin/test.sh $firstName
$lastName"">;
?>

Shell script on Unix box:

#!/bin/sh
firstName=$1
lastName=$2
echo Your name is: $firstName $lastName
exit 0

View Replies !

This Script Is Just A Wrapper For Php (solaris!)
Hi there.

Had a look around google and found one post from someone with almost the
same error and no reply.

SunOS webdb 5.8

I have been trying to install PHP to work with Apache and it all works fine
apart from trying to run php from bash.

../configure --with-sybase=/usr/local/freetds --with-tdsver=7.0 --with-apxs=/
usr/apache/bin/apxs --with-mysql=/opt/sfw/mysql --enable-sockets

All fine...

/opt/sfw/bin/gmake install

# echo $LD_RUN_PATH
/usr/local/ssl/lib:/opt/sfw/mysql/lib/mysql

This all works fine with PHP and Apache but when trying from bash I get the
error..

# /usr/local/bin/php
/usr/local/bin/php: error: /usr/local/bin/.libs/php does not exist
This script is just a wrapper for php.
See the libtool documentation for more information.

I tried a few more things without success and even tried creating `.libs`
incase it was a permission problem when it was compiling - still zilch.

View Replies !

Compiling Php 4.3.4 On Solaris 8 Mysql
Exact output is:
ld: fatal: file /opt/sfw/mysql/lib/mysql/.libs/libmysqlclient.so: open
failed: No such file or directory
ld: fatal: File processing errors. No output written to
..libs/libphp4.so

Again, why is it lokking for the MySQL client library in ".libs" ?

View Replies !

PHP On Solaris (2.6) And Integer Overflow
I have PHP version 4.4 installed on a Soaris 2.6 system and I'm getting
strange results doing math/boolean operators. I have a hashing
algorithm that does multiplication, bitwise operations and mod() calls
interatively on the characters of a filename. On a linux platform the
multiplications start to overflow (as I expect) and the overflow is
just dropped. The lower three bytes are masked off like this:

$result = $result & 0x00FFFFFF;

and the loop continues. On the Solaris platform the multiplication
fails very quickly in the loop, and it looks like the overflow bits are
wrapped around onto the lower order bytes, eventually I end up with an
interger value of 0x00FFFFFF because of the masking above. To solve the
problem I had to compile the gmp_* function support into PHP and work
with the gmp_* family of functions.

View Replies !

Install PHP On Solaris Sparc 2.6
Anyone who has instruction on how to install PHP, mysql, apache on Solaris Sparc 2.6 using DSO module, please let me know. I can make it work, but not with DSO.

View Replies !

PHP N Apache Installation On Solaris
Can anyone guide me how to install and configure PHP with Apache on Sun's Solaris 2.7
The details of my Solaris are as follows...

Sun Ultra 5/10
System v Release 4.0
Solaris 2.7
SunOS Release 5.7
Generic_106541_06

View Replies !

Connecting To Sql Server From Php (solaris)
I have be assigned to find a way to connect to a SQL server from PHP installed on Solaris 9. It would be very helpfull if someone could guide me on this or give me any useful links. I have read about connecting to sql server from PHP (unix) - will the same work for Solaris version.

View Replies !

Installation Problem (Solaris 8)
i want to compiled PHP 4.3.3 under Solaris 8.

My Configuration:
Solaris Version 5.8
gcc Version 3.2
PHP 4.3.3

The compile prozess stopped by the compiling
the "dns.c"

Volker

Here is my error log:

make
/bin/sh /export/home/vpn/src/phprojekt/php-4.3.3/libtool --silent
--preserve-dup-deps --mode=compile gcc -Iext/standard/
-I/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/ -DPHP_ATOM_INC
-I/export/home/vpn/src/phprojekt/php-4.3.3/include
-I/export/home/vpn/src/phprojekt/php-4.3.3/main
-I/export/home/vpn/src/phprojekt/php-4.3.3
-I/export/home/vpn/src/phprojekt/php-4.3.3/Zend
-I/export/home/vpn/src/phprojekt/mysql-standard-4.0.14-sun-solaris2.8-sparc/
include
-I/export/home/vpn/src/phprojekt/php-4.3.3/ext/xml/expat
-D_POSIX_PTHREAD_SEMANTICS -I/export/home/vpn/src/phprojekt/php-4.3.3/TSRM
-g -O2 -prefer-pic -c
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c -o
ext/standard/dns.lo
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c: In function
`zif_gethostbynamel':
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:186: warning:
passing arg 2 of `add_next_index_string' makes pointer from integer
without a cast
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c: In function
`php_gethostbyname':
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:206: warning:
passing arg 1 of `_estrdup' makes pointer from integer without a cast
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c: In function
`zif_checkdnsrr':
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:228: `T_MX'
undeclared (first use in this function)
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:228: (Each
undeclared identifier is reported only once
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:228: for each
function it appears in.)
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:239: `T_A'
undeclared (first use in this function)
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:240: `T_NS'
undeclared (first use in this function)
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:242: `T_PTR'
undeclared (first use in this function)
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:243: `T_ANY'
undeclared (first use in this function)
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:244: `T_SOA'
undeclared (first use in this function)
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:245: `T_CNAME'
undeclared (first use in this function)
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:256: `C_IN'
undeclared (first use in this function)
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c: In function
`zif_getmxrr':
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:288: `HEADER'
undeclared (first use in this function)
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:288: `hp'
undeclared (first use in this function)
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:317: `C_IN'
undeclared (first use in this function)
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:317: `T_MX'
undeclared (first use in this function)
/export/home/vpn/src/phprojekt/php-4.3.3/ext/standard/dns.c:324: parse
error before ')' token
make: *** [ext/standard/dns.lo] Error 1

View Replies !

Problems Compiling PHP 4.3 On Solaris 8
I'm having trouble compiling PHP 4.3.4 on Solaris 8. This is the error
message it is showing:

-- start --
Undefined first referenced
symbol in file
php_parse_date ext/standard/datetime.o
ld: fatal: Symbol referencing errors. No output written to sapi/cli/php
collect2: ld returned 1 exit status
*** Error code 1
make: Fatal error: Command failed for target `sapi/cli/php'
-- end --

The most common suggestiong I found while searching google was to
upgrade GCC from 2.95 to the latest. I upgraded both the GCC and the
libgcc packages and the error still continues. I also tried rolling back
to an earlier version (4.3.3) unsuccessfully.

View Replies !

Install Problem Of 5.2.4 On Solaris 8
when I try to ./configure ...

I get error about xml2-config is to old, and its pointing to a /usr/local/bin.

but I have libxml2 and xml2-config install in /opt/csw/bin

So how do I tell php ./configure to use the xml2-config thats in /opt/csw/bin?

View Replies !

CURL Problem.. Comparing Output From IE/CURL Differs
I'm writing a tiny php app that will log into our bank of america
account and retrieve a file containing a list of checks that cleared
the previous day. The problem I'm running into is when I perform
actions with php/CURL the output is different than when I use IE and
I'm completely stumped as to why. The final output should list files
available for retrieval but the CURL output displays an error/empty
file message.

Here is the curl portion of my code:

View Replies !

Adding Negative Numbers On Solaris
I get an unexpected result when I add two negative numbers in PHP on
SPARC/Solaris 8. The same program works fine on Intel/Linux. I'm using
PHP 4.3.1 on both systems.

Here is my program, test.php.

<?php
$a = 0x81234567;
$b = 0xF0000002;
printx($a, $b);
printx($a, intval($b));
printx(intval($a), $b);
printx(intval($a), intval($b));

function printx($a, $b) {
$c = $a + $b;
printf("%08X (%u) %7s + %7s = %7s
", $c, $c,
gettype($a), gettype($b), gettype($c));
}
?>

I run it from the shell prompt like this:
php -f test.php

Output on Intel/Linux, PHP 4.3.1

71234569 (1898136937) double + double = double
71234569 (1898136937) double + integer = double
71234569 (1898136937) integer + double = double
71234569 (1898136937) integer + integer = double

This is the answer that I expect. I am adding two 32-bit integers, and the
value overflows.

Here is what happens when I run it on
SPARC/Solaris 8, PHP 4.3.1

FFFFFFFF (4294967295) double + double = double
71234569 (1898136937) double + integer = double
71234569 (1898136937) integer + double = double
80000000 (2147483648) integer + integer = double

When both arguments are negative doubles or both are
negative integers, then it gives the wrong answer.

What is causing this, and how do I avoid this strange behavior?

View Replies !

Can't Build Apache/PHP/MSSQL On Solaris
Having read everything I can, and compiled apache/php 30/40 times, I cannot seem to get a static version of PHP working with FreeTDS. I know the FreeTDS drivers for MSSQL are working, cos it took minutes to install the Perl Drivers.

However, the PHP drivers just will not work ! The BBs/Forums all seem to complain about exactly the same problem, and the only success stories are for Linux. Is this because PHP isn't supported as well as Perl ? Has anyone out there got PHP running on Sparc to talk to an MSSQL server ?

View Replies !

PHP 5.0.1, Solaris 5.9, Sablotron 1.0.2, Config Problems
Can run sabcmd with no problems.
But when running a simple php script, it cannot find the sablotron
functions. So it does not appear to be linking the Sablotron stuff.
Probably just something simple I am missing.

Built with:
configure --with-xml --with-expat=/usr/local --enable-xslt
--with-xslt-sablot=/usr/local

Simple PHP script:
<?php
$parser = xslt_create();
$html= xslt_process($parser, "test.xml", "test.xsl");
xslt_free($parser);

echo $html;
?>

Returns:
Fatal error: Call to undefined function xslt_create() in /tmp/xsl.php on
line 2

View Replies !

Xampp For Solaris X86, Need Zipped File
trying to get xampp....0.8.1.sh for
solaris 9 x86.
I only have access to the web via a windows box to download the .sh
file. Windows corrupts the file so can not get it to the unix box tied
up behind a firewall.

Can anyone do a gzipped version of the xampp file for me?

View Replies !

Decimal Parts On Solaris (PHP+ZendOptimizer)
I have problem with decimal parts on Solaris (PHP+ZendOptimizer). When I
get value from MySQL (or from text file - I have had the same), it is
loosing decimal parts.

For example, let say, that from MySQL I have $line[myvalue]=123.45
Then if I will do this: Code:

View Replies !

Compile PHP 5.x With Oracle 9i For Sparc Solaris
I've been scouring for information about this for quite some time now and so far I'm at a loss to the proper/correct way to compile PHP 5.x with Oracle 9i for Sparc Solaris. Does anyone have the straight dope on the definitive method?

View Replies !

Php Lacks Mbstring Extension On My Solaris 10 Sparc
I downloaded and installed php 5.1.6 from www.sunfreeware.com but it
lacks both the php_mbstring.so extension and php_gd2.so extension.

How can I enable those extensions? Where do I download them?
Or do I have to download php source code and recompile all php?

View Replies !

SunONE 6.1 / 4.3.8 / Solaris 8 -> _db_return_ Errors In Log Files
we have a server which has lots of errors of this type:

[09/Nov/2004:15:19:21] info (25982): CORE3261: Crash occurred in NSAPI SAF
php4_execute
[09/Nov/2004:15:19:21] info (25982): CORE3262: Crash occurred in function
_db_return_ from module /sunone/bin/libphp4.so
[09/Nov/2004:15:19:21] failure ( 1091): CORE3107: Child process closed admin
channel

We are running SunONE 6.1 (formely iPlanet) on a Solaris 8 server with PHP
4.3.8 (but this problem was appearing from 4.3.3). We can't seem to find a
pattern to make these lines appear in the logs..

View Replies !

Solaris 9: Can't Build Libjpeg Shared Object
I realize this is the php group, but I have a question that recurses back to my php install.

My objective is a pure 64 bit shared object installation of php 5.0 on UltraSparc Solaris 9 compiled with the Sun Compiler version 8.

My problem is that EVERYTHING builds great EXCEPT that the 6b distribution of JPEG will NOT build a shared object, thus gd cannot include support for JPEG, thus php loses that functionality.

** Configuration summary for gd 2.0.28:

Support for PNG library: yes
Support for JPEG library: no
Support for Freetype 2.x library: yes
Support for Xpm library: yes
Support for pthreads: yes

Yes, I've seen the install.doc from jpeg-6b:

"* If you want to build libjpeg as a shared library, say
./configure --enable-shared"

Here's that output:

1 [gis 9] ~/jpeg-6b > ./configure --enable-shared
2 checking for gcc... /opt/SUNWspro/bin/cc
3 checking whether the C compiler (/opt/SUNWspro/bin/cc -fast
-xarch=v9a -xO5 ) works... yes
4 checking whether the C compiler (/opt/SUNWspro/bin/cc -fast
-xarch=v9a -xO5 ) is a cross-compiler... no
5 checking whether we are using GNU C... no
6 checking how to run the C preprocessor... /opt/SUNWspro/bin/cc
-E
7 checking for function prototypes... yes
8 checking for stddef.h... yes
9 checking for stdlib.h... yes
10 checking for string.h... yes
11 checking for size_t... yes
12 checking for type unsigned char... yes
13 checking for type unsigned short... yes
14 checking for type void... yes
15 checking for working const... yes
16 checking for inline... inline
17 checking for broken incomplete types... ok
18 checking for short external names... ok
19 checking to see if char is signed... yes
20 checking to see if right shift is signed... yes
21 checking to see if fopen accepts b spec... yes
22 checking for a BSD compatible install...
/usr/local/bin/install -c
23 checking for ranlib... ranlib
24 LTSHARED is yes
25 ------------> I am using libtool in /usr/local/bin/libtool
26 checking host system type... sparc-sun-solaris2.9
27 checking for ranlib... ranlib
28 checking whether we are using GNU C... no
29 checking for /opt/SUNWspro/bin/cc option to produce PIC...
-KPIC
30 checking if /opt/SUNWspro/bin/cc PIC flag -KPIC works... no
31 checking if /opt/SUNWspro/bin/cc static flag -Bstatic works...
none
32 checking whether ln -s works... yes
33 checking for non-GNU ld... /usr/ccs/bin/ld
34 checking if the linker (/usr/ccs/bin/ld) is GNU ld... no
35 checking whether the linker (/usr/ccs/bin/ld) supports shared
libraries... yes
36 checking for BSD-compatible nm... /usr/ccs/bin/nm -p
37 checking command to parse /usr/ccs/bin/nm -p output... yes
38 checking how to hardcode library paths into programs...
immediate
39 checking for /usr/ccs/bin/ld option to reload object files...
-r
40 checking dynamic linker characteristics... solaris2.9 ld.so
41 checking if libtool supports shared libraries... no
42 checking whether to build shared libraries... no
43 checking whether to build static libraries... yes
44 checking for objdir... .libs
45 creating libtool
46 checking libjpeg version number... 62
47 creating ./config.status
48 creating Makefile
49 creating jconfig.h
50 jconfig.h is unchanged
51 [03:35 - 0.21]

As you can see from line 41 above, configure is convinced libtool cannot support shared libraries. I modified the configure script to output the location of the libtool being used (line 25) and the value of LTSHARED (line 24).

Has ANYONE out there successfully milked out a shared object from the 6b distribution of libjpeg ?? This is the only thing holding up my build.

View Replies !

Solaris/Apache, Child Pid 3383 Exit Signal Segmentation
I cant get php to work on soalaris 8

when I start apache:

[Mon Mar 8 11:39:59 2004] [notice] Apache/1.3.27 (Unix) PHP/4.3.2
configured -- resuming normal operations

but when I got to my test.php page:

which is <?php phpinfo(); ?>

Then I get a page cannot be displayed page.

then in the apache error logs:

Mon Mar 8 11:40:32 2004] [notice] child pid 3383 exit signal Segmentation
Fault (11)
[Mon Mar 8 11:40:32 2004] [notice] child pid 3382 exit signal Segmentation
Fault (11)
[Mon Mar 8 11:41:31 2004] [notice] child pid 3384 exit signal Segmentation
Fault (11)

What do I need to do?

I installed the SFWmphp package from soalris 9 which I installed on solaris 8.

View Replies !

Post Form With Field Containing "curl Curl"
I have a form that posts and 1 field is for a suburb, 1 of the suburbs in our area is "curl curl".

When ever this is entered we get an error message "You don't have permission to access".

View Replies !

CURL Functionality Without Using CURL
I'm porting some code from C++ to PHP, and the C++ application I'm porting from uses the cURL library (http://curl.haxx.se/). The library is used to both make requests to a internal website at my work and to look at returned response codes (200, 401, 404, etc). It then takes appropriate action, based on the response code that was returned.

Due to a number of issues, many of which I cannot control, I am unable to make use of the PHP port of the cURL library. I need to do user authentication, and check response codes for websites (again, codes like a 404 not found). How can I go about doing this without using the cURL library? Are there native calls available for me to do this kind of thing? If so, what are they?

What other alternatives exist? Native alternatives would be ideal, since I'd like to avoid third-party dependencies if possible. Thanks in advance for any help you might be able to provide!

View Replies !

Exec(curl --proxy ....) Or Passthru(curl --proxy....)
I am trying to do some proxy stuff , I am able to retrieve the page but not able to catch the return , what I am doing is

passthru("curl --proxy 195.115.142.120:80 xyz.com");

or

exec("curl --proxy 195.115.142.120:80 xyz.com");

It throws the results (displays the xyz.com) to my page but I want to catch that in a variable like

$variable=passthru("curl --proxy 195.115.142.120:80 xyz.com");
or
$variable=(some php fucntion)("curl --proxy 195.115.142.120:80 xyz.com");

echo $variable ,

should give me the page.

View Replies !

PHP Install Core Dump "make Install" PEAR On Solaris 9
php has been configured with the following two configure lines and
core's during "make install" on the PEAR section. Is there something
simple i'm missing? Any help would be appreciated.

Environment:

Solaris 9
php 5.2.1
GNU Make 3.81
gcc 4.1.1

../configure --prefix=/opt/foo/php5 --enable-force-cgi-redirect --
enable-discard-path --enable-fastcgi --with-curl=/opt/foo --enable-
sockets --with-zlib=/opt/foo --with-libxml-dir=/opt/foo --with-
openssl=/opt/foo --with-nsapi=/opt/foo/sunone/current --enable-ftp --
with-ldap=/opt/foo/openldap --with-snmp=/opt/foo/net-snmp --enable-
soap --with-xsl=/opt/foo --enable-libgcc --with-mysql=/opt/foo/mysql --
with-pear .....

View Replies !

PHP Not Installing On W2K
I have tried to install PHP on a W2K machine but it won't work. There is now a php folder at c:php and I have amended the php.ini file to reflect this. What else have I forgotten?

View Replies !

PHP Installing
I have a Linux server and want to install PHP on it. Do I have to reinstall Apache and PHP together? Or can't I just install PHP by itself. The documentation on this always refers to a new install like I don't yet have Apache installed, but I do.

View Replies !

Installing PHP On AIX 4.3
I have been attempting to install PHP on an AIX box with little success.

- AIX is version 4.3.3
- Apache on AIX is 1.3.12

I went to the AIX website, and discovered RPMS built for AIX 4.3.3. (http://www-1.ibm.com/servers/aix/pr...x/download.html) So, I installed the RPMS for:

- libpng
- zlib
- freetype
- gd
- php
- apache 1.3.20

I shut down the previous version of apache (1.3.12) and started up the new one (1.3.20) and created a simple phpinfo() script. It reflected that php had been installed correctly, however, the RPM installation did not configure for gd, libpng, freetype, etc. The configuration is copied here:

'./configure' '--prefix=/opt/freeware' '--with-apxs' '--with-mysql' '--with-config-file-path=/etc/opt/freeware/apache' '--with-ftp' '--with-zlib' '--with-system-regex' '--with-xml' '--with-ftp'

Because I really need the graphics libraries installed, I decided to compile from the source, which I have done many times in Linux, however each time I attempt to configure, the process gets halted by errors.

View Replies !

Installing GD
I am trying to install the GD package. I am runinng PHP 4 for
Apache 1.3.31 on Linux Fedora Core 2. This is the command I run ...

[root@localhost php-4.3.8]# ./configure --with-mysql --enable-calendar
--with-apxs=/usr/local//apache/bin/apxs --with-mcrypt=/usr/local/lib
--enable-track-vars --with-gd --with-jpeg-dir=/usr/lib
--with-zlib-dir=/usr/lib --with-png --with-png-dir=/usr/lib

and this is how it all comes crashing down ...

checking for DOM EXSLT support... no
checking whether to enable EXIF (metadata from images) support... no
checking for FrontBase SQL92 (fbsql) support... no
checking for FDF support... no
checking whether to enable the bundled filePro support... no
checking for FriBidi support... no
checking whether to enable FTP support... no
checking for GD support... yes
checking for the location of libjpeg... /usr/lib
checking for the location of libpng... /usr/lib
checking for the location of libXpm... no
checking for FreeType 1.x support... no
checking for FreeType 2... no
checking for T1lib support... no
checking whether to enable truetype string function in GD... no
checking whether to enable JIS-mapped Japanese font support in GD...
no
checking for fabsf... yes
checking for floorf... yes
checking for jpeg_read_header in -ljpeg... yes
configure: error: png.h not found.

I cannot find "png.h" anywhere on my system. What do I need to
install to get it?

View Replies !

Installing PHP 4.3.8
I am trying to install php 4.3.8 with the following:

../configure
--prefix=/usr
--sysconfdir=/etc
--localstatedir=/var
--infodir=/usr/share/info
--mandir=/usr/share/man
--enable-trasns-sid
--enable-cli
--disable-debug
--with-apxs
--with-zlib
--with-zlib-dir=/usr
--with-jpeg-dir=/usr/local
--with-tiff-dir=/usr/local
--with-curl
--enable-dbx
--with-dom
--with-zlib-dir=/usr
--with-dom-xslt=/usr/local
--enable-ftp
--with-gd
--with-jpeg-dir=/usr/local
--with-png-dir=/usr/local
--with-zlib-dir=/usr
--with-iconv=/usr
--with-kerberos=/usr
--with-java=/usr
--with-ldap=/usr
--enable-mbstring
--with-mysql=/usr/local/mysql
--with-zlib-dir=/usr
--with-iodbc=/usr
--enable-sockets
--enable-wddx
--enable-xslt
--with-xslt-sablot=/usr/local
--with-expat-dir=/usr/local
--with-iconv-dir=/usr

When I try make I receive the following errors:

ld: Undefined symbols:
std::terminate()
vtable for __cxxabiv1::__class_type_info
vtable for __cxxabiv1::__si_class_type_info
vtable for __cxxabiv1::__vmi_class_type_info
operator delete[](void*)
operator delete(void*)
operator new[](unsigned long)
operator new(unsigned long)
___cxa_pure_virtual
___gxx_personality_v0
make: *** [libs/libphp4.bundle] Error 1

If I remove

--enable-xslt
--with-xslt-sablot=/usr/local

View Replies !