Grey Transparent Overlay On Canvas
I'm using MacPro bootcamp with Vista. Dual screen with Graphic Card ATI X1900.Everytime I use the Full screen mode I get an overlaying grey transparent color covering the canvas. I have to restart the program to reset the display. Open GL on/off doesn't fix it either.I have tried updating card drivers and CS4. As far as I know it only happens in Photoshop and not the complete master collection.
View Complete Forum Thread with Replies
Sponsored Links:
Related Messages:
Transparent Shadow Overlay Gradient
I have a webpage that has a gradient background that extends down the page at least 800 px and is set to repeat-x. I have an auto centerd column which has a background applied to it. The background is set to repeat-y. The center column has a dropshadow applied all the way around it. The problem is that I am not able to get the drop shadow to blend in with the gradient as the page grows. Initially at the top of the gradient where it, the gradient, is the darkest, the drop shadow blends in. But as the gradient moves down, i.e., becomes lighter, the drop shadow ceases to blend in any more. is it possible to solve this problem? If so then how?
View Replies !
View Related
PS 7 Grey Becomes Pink
I just recently got photoshop 7 and have a problem with it, I currently have PS6 installed and it runs fine. When I installed PS7 today as it was starting up after the installation it came up with a problem with my monitor I ignored it because I didnt and still dont think it is/was the problem. The problem I have is well...pink. Everything is pink, many shades of pink, I can even get some dark purples but thats it I have no access to normal colors, even when I change the RGB settings.
View Replies !
View Related
How To Overlay An Image
I am trying to over lay an image, I have one main image and what i now want to do is have a much smaller image, that will overlay the main one and place it in the corner say of the main image, so you can see both images,
View Replies !
View Related
Overlay Layer For DVD
I am working with DVDit pro 6.0 and I am trying figured out how to make a background menu and the overlay layer that goes with it. I am able to make an overlay layer with the following path: Layer/New/Layer and choosing Overlay in the Mode section. The thing that I don't understand is how to work with this Overlay layer . I understand that the overlay is the subpicture but i'm a little lost. For example, if I have a button which is a picture and I want that the overlay color would be yellow. How to make this work?
View Replies !
View Related
Grey Mystery Box
I now scan an image or bring even an old one up into photoshop I am getting a little grey box in the upperleft hand corner and in it is a number 1 and some other symbol which I cannot make out. This does not happen when I bring the same images up in Paintshop or painter. I recently had to uninstall Zone Alarm and am wondering if this could have something to do with it or maybe it isn't even a PS problem but something on my computer.
View Replies !
View Related
Overlay Not Working?
I have using the overlay feature in Photoshop for two years now. It's always worked well, I put a solid color on one layer, a black and white image on a layer above it, choose overlay, and the black and white image takes on the color from the layer below, keeping all the contrast of the original photo. It's why I like this instead of just changing the opacity, which just lightens and washes the image out, even though the color shows through. Now suddenly when I try to do the same thing I've always done, it takes on the color but I get all these bright blown out areas. I have always worked in CMYK as it's for print. I tried making the image black and white and copying it directly from the grayscale file and pasting it into the CMYK file, and I've tried making it a grayscale image, and then turning it back into a CMYK before I paste it into the actual CMYK file I'm working with. Both ways have the same bad result. It's almost as though a preference accidently got changed but I can't find what it might be.
View Replies !
View Related
Grey Scale In PS7
I have recently installed PS7 on my laptop and when creating a new project, the defaul is sent on grey for the color, when I set it to RGB or CMYK and want to choose a color, I get the standard color box with about 20 colors instead of the color pallet I used to get. What is the setting I'm looking for and how to I set it as the default?
View Replies !
View Related
White Overlay
I am trying to create a business card and do something that is probably very simple but I have no clue. I would like to have this white faded overlay done on a photograph I load like what is done on the business card As for the photograph I load I would like to make the background on it completely bright white even though its not in the photo.
View Replies !
View Related
Text Overlay
I made this image for printing onto t-shirts, but the printer came back and said that it was far too low a quality. only 23dpi when they require at least 72 and preferably up to 300dpi. I tried to increase the resolution but fell back on trying to remake the image.
View Replies !
View Related
Grid Overlay Or X-y Coordinates?
That program by default showed (x,y) coordinates for pretty much any tool. This was really helpful when trying to get a circle around an object precisely. Is there a way to get this displayed in PS? I am using PS CS (Premium Suite-Educational version).
View Replies !
View Related
Layers Menu Grey
While editing some, but not all files in PSE2, I find the layers menu and palette grey and unusable. This mostly occurs when I import a file from the web. I have tried saving the file in tiff or pdf format, but still cannot get the layers to work.
View Replies !
View Related
Color Overlay With Other Effects
when i wanna change the colour of a shape/photo etc i often use the colour overlay option becuase it lets me eye drop to the colour i want. The problem is that i cant apply effects to this picuture/shape later as the colour overlay still has priority, ie if i wanna put a texture on it it still shows the colour overlay. Is there a way to merge the layer so it takes on all effects and i can apply new ones?
View Replies !
View Related
Overlay For A Constellation Effect
I have a picture of two ladies posing and I want to change the picture into a constellation detailing their bodies. My first thought was to do a transparent overlay on top of a black background and then had hoped there was some way photoshop could take a point-sample, giving me their basic structure. I was unable to find any way of doing this so far and was hoping one of you could point me in the right direction.
View Replies !
View Related
How Do I Reduce The Big Grey Background
I just installed CS4 and I now find that I canonly see a single image at a time, as there always seems otbe a big gey background surrounding the current image. A right click allows me to chnage the useless background color, but not get rid of it. I can't drag from the corner to reduce the size. How do I make it so I can work with and see more than one image at a time?
View Replies !
View Related
'Overlay' Image - Elements 4
My Art teacher has just got Photoshop Elements 4.0, and needs to know how to 'overlay' one image on top of the other, for example, placing a leaf over a picture of a face and fading it slightly so that you can still see the face.
View Replies !
View Related
Spacing And Grey Boxes...
How can I make the space between lines like the pic I attached,space them so its 5 or 6 pixels apart? It looks really bad doing it freehand,is there a way to just set the space so it looks even? And how can I add colours to the empty space? Must I use white background instead of transparent? Final question,how can I do those grey boxes like those on URL banner. And those lines that fade out plus how can I sort of make the lines "pop-up" or have that 3d effect,sort of like emboss I guess.
View Replies !
View Related
Pattern Overlay Not Working
Im working on this tut from grey cobra. It shows you how to get that worn out look. At one stage you're told to duplicate the background, go to its blending options, choose pattern overlay, chose crepe paper and use overlay as the blending mode. This is supposed to create a subtle noise effect on the appearance of the background. The screen shots in the tut show this. When i do it i cant see any change after the effect has been applied to the layer. Ive got 100% apacity and all that. Could anyone suggest a reason why it wont work?
View Replies !
View Related
Fade White But NOT To Grey
I am trying to reduce the Opacity of some white text so that it looks faded. However I want the background that this appears on to be black. The problem is that it changes to grey the lower the Opacity. I understand that this is because of the black background but can not think how to get around the problem.
View Replies !
View Related
Layer Thumbnail Is A Grey Box?
instead of showing the thumbnail of an image in my layers panel, I got a grey box for any layer that is in there. Normally I would see a mini-version of the graphic that I am editing. Is this something that I did or touched that made this happen, if so, how do I reverse this?
View Replies !
View Related
Finer Shade Of Grey
Open a new doc in Greyscale mode, and use your Color palette in RGB Spectrum to select your hue of grey/colour. And to get a finer shade of grey/colour within the hue of grey/colour you're working with, click on the little arrow (top right of Color palette) and open up the drop down menu and select Current Color. This will give you a finer palette of grey/colour saturation to work with.
View Replies !
View Related
Grey/Pink Colour!
I recently came across with Photoshop. Basically when I try to use grey as a colour, it seems to have a pink hue to it and looks terrible. The grey isn't pure and looks all sorts of wrong. I've checked the colour settings and everything is default, my monitor seems fine as the usual grey appears perfectly on any websites. It's just on Photoshop, things simply don't look right. So I'm a bit stuck on what to do next, as anyone else had this problem before and is there a possible fix? To better describe, I have provided a picture of the problem, as you can see the grey looks wrong and as a pink hue.
View Replies !
View Related
Printing With Overlay Modes
I have a project in which I created two layers, the top one of which is in Luminosity mode. My printer is printing the top layer only, and I cannot figure out how to print my project with the layer interaction. I am working in Photoshop CS2, with windows XP.
View Replies !
View Related
Overlay Twirl Pattern
i how to make these overlay twirl pattern things, etc on top of these pictures? i would ask the graphic makers themselves but they don't like to share any secrets. i tried experimenting myself but i can't figure it out.
View Replies !
View Related
Can I Use Wrinkled Paper JPG For Overlay?
I'm currently working on creating the following PS project: I'm all the way up to Step 13 (add wrinkled paper texture). However, I can't load the brushes that the guy uses to create his texture; I'm using PS 6, and I get the message that my program isn't compatible with the brushes, when I try to load the brushes. QUESTION: does anyone know of a workaround to make a wrinkled paper texture? I've googled the subject, and it seems that I should be able to make an overlay. So, I went here and downloaded the wrinkled paper JPG: I thought that I could just insert the wrinkled paper into my current project (by creating a new layer); then, maybe adjust the opacity, etc. However, I haven't been able to do this. Anyone have an idea on how I can use the JPG to make the wrinkled texture, or any other ways that I could go about making it? One more QUESTION: In the project that I'm working on, the guy keeps on recommending to create Clipping Mask layers (to hide lines that go beyond their intended border). However, I can't find this option in PS 6. So, I went in and manually erased the extra lines. However, just wanted to know: is there a Clipping Mask option in PS 6?
View Replies !
View Related
Image Overlay Question
How do you take a text image with a white background and make it invisible so when you put it on top of another image, only the text shows. The text has a shadow and a reflection, and it is it's own image. Also, does photoshop have any kind of wordart? I used powerpoint to add shadow and reflection and glow to my text, but it would be perfect if photoshop had some kind of alternative (I'm sure it does, I just couldn't find it).
View Replies !
View Related
How To Make Fur/hair Overlay Onto Skin
I have a picture of a person, and I am trying to add realistic fur/hair to his hands. I chose a good high-resolution picture of a fox as the source for the fur, but I can't figure out how to turn that into a believable texture. Would I be better off usng a custom brush, or is there a way to use the source image and some combination of filters?
View Replies !
View Related
Gradient Overlay Via Blending Options
I'm trying to make a wallpaper and I want to do a gradient overlay via blending options on a layer which already has a black and white gradient fill over it. So I'm trying to do a 2nd gradient overlay. Now, I've set the foreground colour to orange and the background colour to white on the main colour bit on the left toolbar. On the 2nd gradient overlay, I choose "foreground to background" and like I said I made foreground colour orange and background colour black on the toolbar but when I choose "foreground to background" on the gradient overlay it goes purple and blue? WTF is with that. It should be orange and black like I chose it.
View Replies !
View Related
Colour Replacement Tool Is Always Grey?
When i want to change colour in the repalcemnt tool i set the top menu bar to sampling contigous - limits contigous - tolerence 50 and anti alias is on. Then when i choose a colour say black (00000) from the swatches or the eye dropper, I then brush over the area that i want to replace but the colour is not black, it is grey 616161. I have tried all kinds and different approaches but the colour is always grey.
View Replies !
View Related
Color Overlay> Rich Black
I have a tiff image and want to select a dark area to make it very dark black. I want to apply a color overlay of cmky 80,80,80,100 to make a rich black. It seems the darkest I can go in the color picker is cmyk 75,68,67,90. Why is this?
View Replies !
View Related
|
TRACKER
