How To Divide Picture Into 9 Equal Squares/rectangles?
simple way to do this with Photoshop (I have CS)? I need the nine separate jpeg images for the flash version, I understand this example is just one jpeg and is used in the standard html version of a template I have....
Curious is there is way that is automated to do this. I can rotate each section (image) as needed for the spot, but want to take a picture and cut it into equal squares.
View Complete Forum Thread with Replies
Sponsored Links:
Related Messages:
Divide A Single Image
I am looking for an action preferably or direction to the steps to perform the following process. Take a single image. (Picture taken from my Digital Rebel) Equally divide the image into 9 separate images Print each image onto a 4X6, 5X7, Standard size frame, etc. Lay out the images next to each other in a grid to make a larger (poster size) picture. where I can find an action to create my own action to do this?
View Replies !
View Related
Break Up Into Equal Pieces
i have an image that im trying to break up into equal pieces! the thing is that i want the pieces to fit together like a puzzle, so if i were to print them up i would be able to cut them up and all the pieces would fit together flawlessly, so the pieces can become one big picture again.
View Replies !
View Related
How To Equal Skin Colour Of Portraits
I want to upload on my web site students and college colour portrait photos (in contacts sheets) but they have different skin colour ( most has yellow cast but some don't). Is it possible to make some action (to take initial colour of some proper skin colour of the portrait) and apply to all pictures. Maybe some plugin is available.
View Replies !
View Related
Why Doesn't An Inch In Photoshop Equal...
When I create an image of a grid with one inch spacing and print it on my Epson R1800 the grid spacing on the print is not one inch wide (an 8 inch wide grid prints as 8.25 inches). No scaling is being done, resolution of the image is 100 pixels/inch. This is not a question about preview size, I don't care about that. I just want to know the best way to match up what Photoshop thinks is an inch and what my printer thinks is an inch. I am hoping that there is some way to calibrate it once so I don't have to scale each picture before I print it. I am assuming this is a Photoshop issue and not an Epson printer issue because grids created in MS Word print exactly the right size.
View Replies !
View Related
How Can I Make A 6 Sided Shape With No Equal Length Sides?
Can anyone advise how I can draw (from scratch) a 6 sided shape. I cant post an image on here (as I'm a newbie to this forum its going to be hard to explain without an image) Superman Logo and then rather than a point at the bottom imagine a flat extra line (so it then has 6 sides rather than 5) I can make a 6 sided shape no problem, but it always has equal length sides when I first produce it, So I goto Transform>skew (as I would image I could change its shape with) it just never looks right. I take it I either want to drag the corners in and out or to perhaps input the details of size/length/angles etc (but I imagine this will take too long). It is even possible to make this image in 1 go?
View Replies !
View Related
Rectangles Disappears
I use the rectangle tool to draw two rectangles where I use blending options to set opacity to 0 (no fill). But when I draw the second rectangle the first one disappears. How do I see both rectangles at the same time? Another thing. How do I change linesize for the borders for the rectangle?
View Replies !
View Related
Strange White Rectangles Appear Behind...
When I hover over the menu commands in Photoshop or Illustrator (both CS2), white rectangles appear behind the Menu Commands and so cluttering the otherwise nice GUI. As I experienced this before on another computer but still have no clue what is going wrong could someone give me a clue what's going on here? I am using Windows XP Service Pack 2.
View Replies !
View Related
Opacity Squares
I am having a problem reducing the opacity of a photo. When i reduced the opacity i end up with a chequer board of white and grey squares all over the photo any ideas?
View Replies !
View Related
Flipping Squares
I tried to do that kind of sig, but I can't do this flipping (it this right word to describe this effect?) squares. I tried transforming, but it always looked weird... I know for sure that this was made in PS/ImageReady. I searched on some forums, but I can't find nothing in tutorials that are similar to this... So, please, does anyone know how to make that flipping? Thanks in advance for anything, that can help.
View Replies !
View Related
Breaking Into Squares
I have created a ribbon in Photoshop and now I need to have the ribbon break into small squares at the end of the ribbon. I am looking for someway that will take a part of the ribbon and break it apart. Does anyone know how to achieve this? I hope this makes sense!
View Replies !
View Related
Adjust Radius On Rounded Rectangles
Is it possible to adjust the radius of the rounded rectangles after you have placed the rectangle on a layer? am moving from Fireworks. In fireworks, you had a drag handle to quickly and easily adjust the radius for all or individual corners. I can't seem to find that funtionality in Photoshop. I have found how to create the rectangles and adjust the radius before I place them in a layer, but not after.
View Replies !
View Related
Vector Bounding Squares
I was trying to creating a bounding box, and I wanted it to be curved. I know how to do it with a selection, but I really don't want that because I want to have this as a vector. I need to use a shape. But when I use the shapes, they keep filling with a colour, and when I turn that off, I can't keep the outside border on.
View Replies !
View Related
Breaking A Texture Into Squares?
I am in the business of 3d design, and have recently been learning a lot about the software I use. It works best with square textures (512x512 and maybe 1024x1024). Some of the textures i create for my models are tall and narrow, or short and skinny. For example, on a 600 foot skyscraper, my texture may be 1024x4096. What I normally do is manually cut this image into 4 textures that are 1024x1024, and apply them to their respective places on the face so the exporter doesn't diminish the quality as much. (The exporter I use takes the longest dimension of the face in the 3d model and reduces it to 512px wide, and so in this example the short dimension would become 128px, which is very low res, imo). Is there a script that would better serve my purposes here, that would breakwhatever image i am editing in Photoshop into square chunks? In the most extreme case, I had to take an image that was 1024x24576, and chop it into 8 different images, and i remember this process being difficult to accomplish seemlessly.
View Replies !
View Related
Action To 'dice' Images Into Sequentially Numbered Little Squares?
I need a way to take images of a preset size and slice them up into seperate little image squares which are each saved with a sequential number starting with the first square (top left) but in a grid type pattern - so the first square would be saved as '1-1.jpg' and the one to the right of it would be '1-2.jpg' and the one to the right of that would be '1-3.jpg' etc. Then the next row would be like '2-1.jpg', '2-2.jpg', 2-3.jpg' etc. and so on. Is there anyone who would possibly be able to help write an action to do this automatically? I know it's a large request but I'm not so good with complex actions and don't know where to begin with this. Please help if you can. The final 'diced' images are to be used in a website which is a college project of mine, I'm fine with building the website, I'm just not so good with actions and really don't want to have to slice a number images individually (I'm currently estimating there will be a large number of little squares per image - something in the region 300 or so...). If anyone can help I'll work out the exact figures and dimensions so it can be done.
View Replies !
View Related
Soft / Blurred Edges To Rectangles When Drawn With Grid / Guidelines Showing
I've got a very annoying problem. When drawing rectangles with grid / guidelines showing using 960 Grid System (although it happens with other documents as well), the edges of the rectangle are not sharp, e.g. http://img16.imageshack.us/img16/6232/blurred.png - note top and right side is blurred. There are no styles applied. When I switch off grids / guidelines, the rectangles are always sharp. Also, resizing rectangles causes loss of sharpness to edges. Using CS4.
View Replies !
View Related
Easy Way To Align Sections Of Paths That Are Not Squares. And Putting Paths Together
my friend and i are working on our own template for a website we're working on and we are having some trouble with the sidebar design we wanted to use. it involves multiple lines and cuts and such that we made using paths, and to our dismay we didn't space them far enough apart so when the paths were drawn in it just looked like blobby rectangles. we want to re-do it with better spacing but we don't want to go through all the trouble to align up the paths again using transform boxes like we did before, they're not very helpful when trying to align things that are not squares. any tricks we're missing?
View Replies !
View Related
Copying A Partially Transparent Picture On Top Of Another Picture
I have several partially transparent GIFs. I'm trying to layer them all on top of each other. When I copy one partially transparent GIF and paste it on to the second partially transparent GIF the transparent section turns white and is no longer transparent. Therefore covering up the contents of the prior GIF. In short, please have a look at the three attached pictures, I would like to have all three on top of each other showing all buttons.
View Replies !
View Related
Make Picture 1 Look Like Picture 2?
How does this person make picture 2, I want to know how he has edited it? I have spoken to my photographer and he thinks he has used a photoshop tool. Please I really want to know, I can take the base picture easy but need to get the picture 2 "finish" I have included 2 pictures, My picture is number 1 and picture 2 below is the one I am trying to look like, can you try and edit my picture 1 image to see if you can match picture 2? I used a light box to take picture 1
View Replies !
View Related
Adding A Picture From Another Picture
I would like to display an image behind an image in the area that I selected only. Does that make sense? Let's say I have a picture where the sky looks white and I want to add blue sky with clouds from another image exactly where the sky should be. Is that easy to accomplish?
View Replies !
View Related
Picture On The Jar
I'm trying to put a square picture on a round pasta jar, I need to make it look like the picture is actually the lable.. how do I sort of ... round or bevel the picture to make that work?
View Replies !
View Related
How Do You Add A Picture Onto A Picture?
In photoshop, I am editing an image. What I want to do to the image, is add another image onto it. When I try to drag and drop the other image onto the image im editing, it opens a whole new window for it and everything. Copy and Paste does not work. And I've tried messing with the layers of my image, but that didn't do anything.
View Replies !
View Related
Picture On Top Of Picture For Web Use
What is a common way to lay one photo on top of a portion of another? The images are large files that will need be saved as smaller jpegs. One image would be700 by 400ppi. The other, which overlays directly atop, is 200 x400ppi. The overlay is not a transparent or merging double-image effect. It's a solid photo cutting across a section of aother photo. I can do this fine in InDesign, however the web desinger will want to have the composite photo as one file, ready for the web.
View Replies !
View Related
Picture Of Sun
I'm kind of new to photoshop. I started a little while back. As you can see below I have try to make a picture of the sun. It doesnt look that great but the thing that's really annoying me is if you look in the bottom left hand corner of the sun you'll notice that the orangish colour runs. It's really bugging me. Anyone have any suggestions on how i could fix it??
View Replies !
View Related
Pen Tool :: How To Cut Picture
still new to photoshop and im making a banner but i need help with the pen tool. After i i finished outlining it with the pen tool, how do i cut the picture? Cause when i cut the picture and put it in another background all i get is the outline of the picture and not the actual picture of the person.
View Replies !
View Related
Picture Size
How do I figure out the size of a picture on my canvas? For example my canvas is 500x500 and I have a picture much smaller on it how do I figure out the size of the image. When I click on the image the size does not show anywhere.
View Replies !
View Related
|
TRACKER
