Printing Business Cards
I have Photoshop 7 and I want to create some business cards in Photoshop and then print them.
How do I set it up so that it will print out on those business card sheets correctly?
View Complete Forum Thread with Replies
Sponsored Links:
Related Messages:
Review My Business Cards
I am trying to create an image to use for my business cards and I have come up with 4 cards all using the same design. Please let me know which you all think would be better. Business Card 1 Business Card 2 Business Card 3 Business Card 4 Note: These were created with photoshop.
View Replies !
View Related
Create Business Cards And Print Them
i have created a business card for a client. i made it 3.5 in wide and 2 in high. i also added 1/8 in on all sides for bleed and cutting. i want to make a page containing 8 cards per page. i went to automate/picture package in p/s cs and found i can make a page, but not with the images sized to make business cards.
View Replies !
View Related
Printing Business Card
I'm doing a business card for my friend in photoshop (can't use japanese in illustrator), and he uses this specific company color. I switched the image to greyscale and used tritones for the pantone spot colors. However, it seems these pantone colors don't cover every color in the spectrum. Can I just choose the color I want using the hex code? also, I added bleeds to my card. When I am done, what file should I send to the printer? .tif? or the photoshop file? and also, how will they know where the bleeds start and where it ends? should I draw lines on the picture to show them? Last thing, why is it when you save a file in cmyk, the color gets so distorted?
View Replies !
View Related
Business Card
I am probably not posting in a right forum. Not sure where it should go. What should a business card definitely include? What kind of info? Name of company? Do I need to put my name also? Or just the name of the company is enough? Do I need to put my address? Or is my phone number and email address enough? What about website address is it necessary?
View Replies !
View Related
Business Card In 3D
how can i make a business card in 3D like the one below with Photoshop? I can make the round rectangle, and put some bevel and shadow, but the problem is that this card has the right-side of it aparently more higher than the left side... how can i do that? It's a nice effect but i don?t know how to do it?
View Replies !
View Related
Creating A Business Card
My experience with CS3 is with photos and not creating images starting with a blank canvas...so I am having a hard time trying to figure out how to copy/paste the image I made (using brushes and text only)from a blank canvas on to a template for a business card...
View Replies !
View Related
Making A Business Letterhead
I’ve only used paintshop in the past to manipulate photo’s lol, but now I have a serious use for it. The only problem I have is getting the borders to print right to the edge of the paper when printing. I mean its way off, is it that I am setting my paper size wrong? When I select ‘new’ I make the document 210x297mm is this right?
View Replies !
View Related
How To Fly Cards
I have a pack of tarot cards which I want to make it look as if flying in a storm..in a circular fashion...and then add my character in the middle... Is there any way I can do that in PS?
View Replies !
View Related
Greeting Cards
Just started comming back to photoshop after all my sommer activities. Since i graduated from my high school this year i am going to make a greeting card or rather a "thank you card". I tried to make one and actualy i find it prettay hard.
View Replies !
View Related
Greeting Cards
I spend hundreds of dollars on PS - the best graphics program on the market - and yet it does not have a template for doing greeting cards. Or if it has I can't find it . So I am reduced to using Borderbund or some similar software.
View Replies !
View Related
Video Cards
Which video card would you recommend to be used for? Photoshop CS2 Illustrator 10 Painter IX.5 Adobe Premiere Elements 2 Watching DVD’s And some games As of now I Have a GeForce 4 MX440 I would like to upgrade to one of the following: ATI 9600 XT: 500/600 256MB 128bit Or ATI 9800 Pro: 380/680 128MB 256bit Could you recommend the best one to use with Photoshop CS2.
View Replies !
View Related
Biz Cards Alignment
am designing my own DJ Business cards. and i need some help on aligning everything and get all the shapes, shading, logo, text, pictures , and everything just perfect and ready for printing. You could also change the whole design but its up to you Im a DJ and I was looking for a nice, professional, Digital, 3D design. I have both the front and the back designed out but i don't have any idea how to upload the photoshop (.psd) files so just reply to this and we'll figure it out.
View Replies !
View Related
Christmas Cards [Extracting]
I took a photo for a family Christmas card, and am trying to make the card on Photoshop. This question will prove what an amateur I really am, but I am having trouble with layers. When I change the size or format of one layer, all of the layers change as well. I can't seperate what I do on one layer from the next. Can someone please help me with this? Also; I can't change the size of my photo to fit it on the other layer. How do I change the background layer from the photo to the background I want?
View Replies !
View Related
Upgrade Display Cards
Currently my display card is a NVIDIA Quadro FX 500/600 PCI. One of the reasons I chose this card is it supprted dual montors. Now that I have upgraded to CS4 Extended I need to upgrade my display card. When I went to Adobe's List of tested graphics display cards for Photoshop CS4 and seen such a long list of cards for Windows.I thought I would come here and ask if any body else has upgraded theirs. I would perfere to go with a nVidia card. Do any of these cards support dual monitors? Or how can I keep using my two montors? Price wise $250.00 is the highest I can go. which card to get?
View Replies !
View Related
Matrox M Series Graphics Cards
I am thinking about buying an M9125 card from the new range of Matrox M series cards. I have tried without success to find a review of this series and of the card I am interested in particular. Nor can I find any mention of it or its performance in a user forum anywhere. My display is a NEC2690 (26") running at a resolution of 1920x1200. I don't game and just want a new card for PS and Corel Painter work. I have CS3 and will probably move to CS4 idc.
View Replies !
View Related
Crash With Multiple Video Cards
I have three monitors connected to two separate graphics cards, an 8800GT and an FX5200 (PCI). Now, this setup works fine in regular XP Pro, with driver 175.19; Photoshop CS4's OpenGL works without a problem save for the brush cursor bug. However, I installed Vista x64 as a dual boot for the RAM boost, and ran into a bit of a wall. Photoshop now refuses to work at all with the OpenGL enhancements on. It loads (an improvement in itself, used to get stuck at "Reading preferences"), but it'll freeze when I try to open a file or go to the performance settings. I'm currently using driver 171.16; I know it's outdated, but it's the most recent one that works with both cards in Vista x64. I'm also quite sure it's not the problem; Photoshop works perfectly with OpenGL on if I disable the FX5200. I've tried the registry key AllowOldGPUs_ON to no effect. I've also tried both the 64-bit and 32-bit versions, with no difference. Is it possible to get Photoshop working with both cards, short of replacing the FX5200? Specs: Intel Core 2 Quad Q9300 2.50GHz 4GB RAM Over 300GB HDD space available for scratch disk use EVGA 8800GT PNY Verto FX5200
View Replies !
View Related
Video/Graphics Cards For Animation/NLE
I'm leaning towards a Power Mac G5 as this machine's primary function will be NLE and motion graphics and animation. I'm wondering: does the base G5 have what I'll need in terms of video/graphics cards, or will I need to upgrade/buy a more expensive model?
View Replies !
View Related
Adobe Acceptable Video Cards With Open...
Adobe accepts only NVIDIA and ATI series of video cards. I just bought a Sony laptop with a different video card (INDVID-001637-64) with 1.8 GB onboard RAM and with Open GL capabilities but PS CS4 extended 64bit does not recognize the card. Is there a work-around to get PS to recognize this card or am I just not going to be able to use the Open GL for PS. I have been to Sony Vaio to see if there are any other possibilities but can't find any updates that work on my particular computer. I am running a Windows Home Premium Vista, 64 bit system with 4 GB of RAM so I am sure all of that is OK. I just don't know where else to go for information except back to where I purchased the computer. Maybe replace the video board if possible. Or maybe Open GL just isn't worth going to the trouble. Seems like that might be the case also according to some of the discussion here.
View Replies !
View Related
Old Hand Colored Effect On Movie Lobby Cards
I am working at my private edition of cinema lobbycards. I think in the time in the sixties and before, they was mostly handcolored / painted I started my work with a screenshot form ´Rear Window´: (the background is something different) Then I turned the color in the technicolor style withe channelmixer: Red = 140 Red, -20 Green, -20 Blue / Green = 140 Green, -20 Red, -20Blue / Blue = 140 Blue, -20 Red, -20 Green:
View Replies !
View Related
Tile Printing With High Resolution Printing?
i have an image that is 28' wide by 60' high. i have to tile print it, but i have to print it out on film (see thru acetate). it has to be able to print at 1400 dpi. i know how to print at 1400 dpi on adobe photoshop, but i dont know how to tile print on that program. i have the image now in illusrtator, because it lets me tile, but i cant get it to print out for film (1400 dpi). im using a epson 1280 printer. i really need to be able to tile print this in high resolution on film. anyone know what i can do??
View Replies !
View Related
Photo Printing - Not Printing To Border
i've tried both borderless and non, I've also realigned by cartridges and updated drivers and program. When I'm printing with Photoshop CS, didn't do it on 6.0, it's not printing properly at all. It's not printing to the edges of the paper (4x6) and the space it's leaving on all sides isn't even. If I choose borderless it's even worse and if I print a larger picture on 8.5 x 11 and pick center, it's not even close, I'm talking inches off.
View Replies !
View Related
Printing With CS4
I just bought the PHOTOSHOP CS4, and I am having problem when it prints. The image is not clear, it has dots (pixels). This computer where I installed this program is brand new. I have previously worked with Photoshop CS2 and never had an issue but was force to buy this new one because the computer that I bought has Windows Vista and CS2 is not compatible. I thought maybe the problem was my printer but is not I have a Brother HL-5140 (black and white). I have connected my old computer with the printer and the images print perfectly fine. I have printed photos and it prints clear. But this only happens with Photoshop CS4. It prints dots,
View Replies !
View Related
Printing?
i need to print w/ the bleed, registration points etc. i have gone to print & preview, but my bleed is not showing up on my print and i don't know how to fix it?
View Replies !
View Related
A1 Printing
I have to create a poster. The poster will have text and images on it. The problem is that the poster has to be a1 which is much bigger than i have ever printed before. tell me Which settings i should use when making the new file RGB? size?
View Replies !
View Related
Printing.....
I have a Canon i250 Printer and would like to print my photos onto Kodak Glossy Photo Paper but it says on the packet only for injet printers and my printer is Bubblejet. So would i be able to use that paper? Also i found some photo paper around the house but it is only for Hewlett Packard printers but i tried it in my Canon printer and when it comes out there is so blobs its hard to explain like there is dots with white around it is this because i am using the wrong paper?
View Replies !
View Related
Printing In CS4
I have just started using CS4, having upgraded from CS2. When I go to print in the print dialog box and go to the Printer Profiles box I am unable to see or select my paper profiles for my Epson 2200 and R300 printers. There is a large number of profiles, primarily various color spaces, but only one paper profile for my Epson 2200. There also isn't any arrow or other way to scroll through the display to see the missing paper profiles. All of the missing profiles are the standard paper profiles provided by Epson either with the printers or from their website. Do I need to reinstall these profiles in some way in CS4 or is there something else I should be doing to be able to access these profiles?
View Replies !
View Related
Printing In CS4
In CS3 you could print multiple images on a sheet like a photo studio by going to File-Automate-Print Package and in CS4 that option isn't there and I can't find any information on it.
View Replies !
View Related
Printing
i wanna do a stencil, A4 is to small, and my printer is only general a4 size, is there a way on photoshop that you can perhaps use combined sheets of A4 to creat a larger image or does it all have to be done manually??
View Replies !
View Related
CS3 Printing
Tried to print a 10ft panoramic landscape with CS3 on an Epson 1290 with disastrous results. Only prints about 4ft then aborts. Worse still what it did manage to print was 5ft of the the panorama compressed into that 4ft, the width had been compressed by my assessment as much as 15/20%. Previously had no problems with CS2 so I have had to reinstall CS2 to effectively do all my printing (especially long landscapes). Even gone to the extent of reformatting computer and reinstalling everything from new. So Adobe can you please tell me what good is it or the point in releasing a program that you cannot trust to print? I don't trust Photoshop CS3 to do any of my printing anymore, not even A4 or A3 sizes.
View Replies !
View Related
Printing
I use photo shop for everything on our company, from designing websites and multimedia screens to art that will get printed. The company uses a SAVIN C3535 for our printed material, and it used to get us really good print quality...until now. When I print stuff directly from Photo shop it creates a weird "cutout" effect on the pictures (people and logos mostly) and creates like a black "noise" surrounding any black text in my art. Color text and shapes print out fine. Anything with tones looks bad. If I send the same file to print to different printer, it looks awesome! Obviously it is the printer...Any suggestions on what I can do to fix this? i already contacted the printers' tech support, but they haven't been able to fix it (they keep blaming photo shop)
View Replies !
View Related
CS3 Printing @ 500% In...
This is with resample off, so the final product will be printed at 200ppi. As part of our (forensic) workflow, we print images at 500%. There are different ways of doing this, but some people in the office specify this in the Print Preview Pane, whereas I do it directly to the image in PS before going to print. After switching to CS3 from CS, it was noticed that 500% for a 1000ppi image (physically less than 36mm X 24mm at 1:1) was being limited to a bit less than 400%. An error box would pop up saying the value must be between 0.00% and XXX.XX%... and it would automatically select the maximum in the range. For a 1000ppi original image, the upper range would be around 370%. I tried it with a 2400 ppi image (5MB) and was limited to ~150%. Apparently this is not a specific number, but some sort of resolution-based maximum. The printer used for output doesn't appear to matter as we've tried a couple of different ones. Is there some sort of maximum percent of image size allowed for printing, based on resolution that can be selected in the Print Preview Pane?
View Replies !
View Related
Printing On OS X
I am transitioning from OS 9 to OS X and am running into some problems with printing. I am using a G4 mac DP, 1.25 Mhz. and an Epson Stylus Photo 820. and I'm running both systems on my G4. I had been using PS 7 with OS 9 and printing out pictures without any problems but I recently downloaded the Try out version of Adobe PS CS2 and decided to use it to print out some of the pictures on OS X. In the Print Preview the options were set to let the printer determine colours. When that was OK'd the next print page showed only the printer and the presets which said Standard. The problem I'm having is that the picture takes less than a minute to print and is of poor quaility compared to printing the same picture on OS 9 with PS 7 which takes maybe 2 or 3 minutes. The printer is printing at 300 dpi on OS 9 but i'm not sure what it is printing at on OS X. Not sure how to check that with OS X. Like I said earlier I'm not that familiar with OS X yet.
View Replies !
View Related
PPI Vs DPI And Printing
if I understand PPI and DPI correctly. PPI dtermines the actual reoslution of the picture and DPI really determines how much ink the printer will spray per inch as it prints out. So I guess I would like to know if anyone has suggestiosn to these three questions. 1. When scanning an image in, does DPI Actually refer to PPI? If so, what DPI/PPI shoudl I scan at. 2. In photoshop cs3 does the "Pixel Demenssions" section refer to PPI and the actual DPI section refer to the DPI setting for the printer? 3. What would be the best PPI and DPI settings for printing out the 3foot by 2foot poster?
View Replies !
View Related
Printing In Lab...
I have a document thats currently in CYMK color mode, and I'm having difficulty finding satisfactory colors. I was advised elsewhere to abandon CYMK. I therefore want to convert my image into to LAB color mode. I've read that converting from one color mode to another can cause layers to look funny, however I need to retain some of my layers... Do you guys typically have problems with this? In retrospect I should have STARTED in Lab... Seems that converting from CYMK to LAB wouldn't be as problematic as converting from LAB to CYMK... The key question is this: will my printer (Epson R800) even be able to print in LAB mode? I thought yes, or at least closely... because it has much more than CYMK to work with... it has these cartridges: #1 Blue UltraChrome Hi-Gloss Ink Cartridge T054920 #2 Cyan UltraChrome Hi-Gloss Ink Cartridge T054220 #3 Gloss Optimizer UltraChrome Hi-Gloss Cartridge T054020 #4 Magenta UltraChrome Hi-Gloss Ink Cartridge T054320 #5 Matte Black UltraChrome Hi-Gloss Ink Cartridge T054820 #6 Photo Black UltraChrome Hi-Gloss Ink Cartridge T054120 #7 Red UltraChrome Hi-Gloss Ink Cartridge T054720 #8 Yellow UltraChrome Hi-Gloss Ink Cartridge Finally, in the print screen menu should I be "letting photoshop manage colors" or letting "printer manage colors"? Do you guys have any other tips on how to tweak printer/photoshop settings/preferences to maximize the accuracy of my colors? Would I possibly be better off just using RGB?
View Replies !
View Related
Printing In CS
Im having a rather simple problem but of course with Photoshop nothing is simple.. I am wondering how to print a multiple page document, my printer will print odd # pages as the front and even # pages on the back side... so pretty much I just need to know how to print two documents at once on photoshop?
View Replies !
View Related
Printing
I have been assigned to make a DVD cover, and I am just wondering what would be the best printing options. I'm wondering what kind of paper would be best, any sizes, files, resolution, the works... Haven't really done this so I'm just a little confused.
View Replies !
View Related
Printing DPI & PPI
I'm making a billboard ad for a friend using CS2. The dimensions are around 14'x6'. The printing company hasn't been much help for me. They usually print basic vector graphics and they don't worry much about distortion. The most they could tell me was that they print at 150 DPI and that I can make my image at half size and they'll blow it up.. I'm very worried about distortion as it is an elaborate pixel based graphic. However, I'm having much trouble working at this huge resolution. Major disk errors and massive loading times between tasks (even with 200gb free disk space and 4gb ram). So, I'm wondering is there any lower resolution I can work at without losing quality here? The printing company hasn't been very helpful here, and I'm having trouble avoiding distortion even in photoshop alone at this rediculous resolution. Thanks if you can offer any advice here, I just feel as if I'm making it harder for myself than it should be. ps I know how to work around the disk scratch errors,
View Replies !
View Related
Printing Metadata
1-Is there any way Metadata seen via PS-2/Adobe Bridge/Metadata tab can be addded to the system clipboard, or copy/paste for hardcopy printing or web report needs? 2- It seems that metadata can be entered only via the Adobe Bridge/Metadata/IPTC Core section, and for jpeg formats only. Is this correct?
View Replies !
View Related
Printing Sizes
I recently made a poster which was taken to the printers, the printer said that my file was not the correct size, i had made the image to the A1 dimensions but when it printed it was much smaller on the page, they said the file wasnt the right dimensions but they can stretch it to fit, so what is wrong, is there another setting i should have used because i thought if you made the picture to the A1 dimension or to any dimension you wanted then it would print in that size?
View Replies !
View Related
|
TRACKER
