Printing Sizes
I recently made a poster which was taken to the printers, the printer said that my file was not the correct size, i had made the image to the A1 dimensions but when it printed it was much smaller on the page, they said the file wasnt the right dimensions but they can stretch it to fit, so what is wrong, is there another setting i should have used because i thought if you made the picture to the A1 dimension or to any dimension you wanted then it would print in that size?
View Complete Forum Thread with Replies
Sponsored Links:
Related Messages:
Printing Panoramic Sizes
I want to make a panoramic picture to say something like 20"x10" using cs3, when i go to upload it to a printing company i.e. photo box, the image always appears smaller. I have tried using Genumne Fractals 5 but i do not seem to get any luck there either. What i need is a complete idiot`s guide on how to create and print succesfully a panoramic image.
View Replies !
View Related
Web Layout Sizes
I am trying to get my head around teh size of the layouts I have seen in tutorials. A lot of them atre about 770x 700 and the thing is this is not big enough for the width. How do you get round this. Do you use css to expand teh size of everything to how you want it to?
View Replies !
View Related
Resizing Various Image Sizes All To
Is there a way to make an Action for batch processing to take a folder of various file sizes of photos and make them all retain there proportions but end up the same final size? I am wanting to put on web quite a few photos but do not want to down size each one at a time. If I want them all to be about 200kb, how can I do that where a 5mb pic or a 500kb pic could all be processed with the same action to end up the same size?
View Replies !
View Related
Brush Sizes In Photoshop 6
I'm trying to increase the size of brushes in Photoshop 6 and the slider for increasing and decreasing doesnt appear to be available. I've tried various different things and it's driving me mad because I cant seem to find it anywhere.
View Replies !
View Related
Resolution And File Sizes
This question may seem obvious to some of you but I'd like to understand this issue. I've been taking digital photos in Raw format for use in photoshop, I'd eventually like to send them in to a stock photography site and the one I'm thinking of applying to, Alamy, demands file sizes of 48MB+ per photo in TIFF. I've been uploading them from my camera onto my hard drive and they end up just short of this required file size, around 46MB. Unfortunately a 1GB flash card full of Raw images, when converted to this size, eats up a lot of memory. I don't think I can use all the images for stock photography anyway so I started looking at how I can affect file sizes under "Image"-"Image size" so I can clear up some memory and I've noticed I can play around with the image size if I change the resolution. Currently the 46MB photos are at a resolution of 2000, if I change them to 300, the resulting file size is just over 1MB, which is great because the ones I can't use, I can still store at a reduced size and clear some space on the old hard drive. But I've noticed I can take the same converted 1MB image, change the resolution to 3000 and end up with a 105MB image. OK "So what's your problem?" you might ask. Well, where's all this extra resolution coming from? I can make it go up and down as I please and I have no idea how this is even possible. Shouldn't reducing resolution from 46MB to 1MB forever reduce the quality of the image? How is it possible to go back to the original size or even increase it?
View Replies !
View Related
Default Open Sizes
I am trying to do a batch resizing of a number of pdf images/eps images. Ultimately I would like to run a batch like so: ->file->Automate->Batch... My Batch command: * opens a dir of images and then resizes them to 600px and 150px and saves them in two different new dir's. This works fine but all of the images are different sizes so the smaller ones come out blurry. I can avoid this by opening each image at 600px. However, this is time consuming. way to have a default size that an image opens to (i.e.600px) or is there something this
View Replies !
View Related
Finding Out Layer Sizes
I'd like to find out the amount of all non-transparent pixels in a layer. For example, if there was a 100x100 box and a 50x50 box in one layer, I'd like to get the number 12.500 without having to count every pixel. Why? I've bought myself a copy of "Homepage Usability - 50 websites deconstructed" by Jacob Nielsen & Marie Tahir. One nice idea I found in it was a break down of used screen estate. How much of the website is navigation, how much selfpromotion, useful content, and so on. I've come as far as simulating the graphics for Amazon by putting each screen estate category on its own layer. What I'd like to do now is somehow get the percentage of that certain category. Like how much percent - compared to the size of the whole image - of the layer "Navigation" are non-transparent?
View Replies !
View Related
Reducing Multiple Image Sizes In One Go
I have a whole directory of images which I took with my digital camera. I want to post them on my site, however I would like to reduce their size to fit the html pages. I know how to perform this task for individual photos, but since my directory consists of many images, this task will be very time consuming. I was wondering if there is any way to have photoshop make the same image size reduction on all images, by running some sort of script or any other way. If there is such a way, does photoshop also save the new smaller images?
View Replies !
View Related
Batch Saving Multiple Sizes
I'm using Photoshop to create my web images and need to make an "Action" to use the "Save for Web" function where it'll save 3 different image sizes (Small, Medium and Large) with a suffix at the end of the file name ("_s", "_m" and "_l" respectively), but I can't seem to find any way of getting the software to add to the filename without rewritting it completely (which I have to do manually anyway). I have found the "Output Settings" dialog window and this looks to do everything I want, but I have tried everything I can think of and can't seem to get it working.
View Replies !
View Related
Make Lines Into Dots Of Different Sizes?
I'm trying to figure out how to create an image of a solid line into one with a dotted line. this isn't a matter of spacing, but rather filters of some sort (i'd imagine). See this example for the best explanation: I had the first image (from a brush) and created the second by hand. I literally took a layer and traced the original with dots, making them larger or smaller as I went along. There must be a better way! So I'm looking for the way to convert a line of varying widths to a single dotted line of various-sized dots. make sense? I'm looking for a something similar to the new orbit packaging.
View Replies !
View Related
Copy And Paste Exact Sizes
Selecting and copying is of course trivial with the marquee tool. I have a single image; I wish to consider it as 5x5 and take, exactly, each of the 25 pieces separately. I cannot judge this perfectly by eye.
View Replies !
View Related
Batch Image Resize From One Size To 3 New Diff Sizes, Possible?
I got stuck doing a grunt job for the company I work for. I really need some automation to get this done faster. Problem: I have multiple folders.. in each folder contains a small image called 100x100.jpg I want to run a batch process using a created action to take the above file and instantly resize it 3 different ways and save all three files. I created an action doing the resize 3 times.. I made 120x120.jpg, 90x120.jpg and 88x88.jpg from the first one so now there's 4 files in that folder. Imagine having to do this manually for 30 websites, 30 folders each. So, I keep getting the REPLACE FILE? popup.. it worked fine when I did it recording the action. But when I run the droplet or batch, it won't write the files to the folder and seems like its replacing or trying to overwrite something.. doesn't make sense.. and I need to do it recursive style.. all folders inside one root folder.. so the batch operation should go into all folders, resize the image creating 3 new ones, for each subfolder.. saving them in their respective folders, NOT a new destination folder.. again, each 100x100.jpg has its own folder, there's 30 folders, each with one of these files in it.. diff pics of course, just same filename.. Please, if someone can give me a step-by-step to try, I'd truly appreciate it.
View Replies !
View Related
Tile Printing With High Resolution Printing?
i have an image that is 28' wide by 60' high. i have to tile print it, but i have to print it out on film (see thru acetate). it has to be able to print at 1400 dpi. i know how to print at 1400 dpi on adobe photoshop, but i dont know how to tile print on that program. i have the image now in illusrtator, because it lets me tile, but i cant get it to print out for film (1400 dpi). im using a epson 1280 printer. i really need to be able to tile print this in high resolution on film. anyone know what i can do??
View Replies !
View Related
Photo Printing - Not Printing To Border
i've tried both borderless and non, I've also realigned by cartridges and updated drivers and program. When I'm printing with Photoshop CS, didn't do it on 6.0, it's not printing properly at all. It's not printing to the edges of the paper (4x6) and the space it's leaving on all sides isn't even. If I choose borderless it's even worse and if I print a larger picture on 8.5 x 11 and pick center, it's not even close, I'm talking inches off.
View Replies !
View Related
Print Preview Colors Don't Match Work Window + Print Sizes
So I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked). This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help. Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
View Replies !
View Related
Printing With CS4
I just bought the PHOTOSHOP CS4, and I am having problem when it prints. The image is not clear, it has dots (pixels). This computer where I installed this program is brand new. I have previously worked with Photoshop CS2 and never had an issue but was force to buy this new one because the computer that I bought has Windows Vista and CS2 is not compatible. I thought maybe the problem was my printer but is not I have a Brother HL-5140 (black and white). I have connected my old computer with the printer and the images print perfectly fine. I have printed photos and it prints clear. But this only happens with Photoshop CS4. It prints dots,
View Replies !
View Related
Printing?
i need to print w/ the bleed, registration points etc. i have gone to print & preview, but my bleed is not showing up on my print and i don't know how to fix it?
View Replies !
View Related
A1 Printing
I have to create a poster. The poster will have text and images on it. The problem is that the poster has to be a1 which is much bigger than i have ever printed before. tell me Which settings i should use when making the new file RGB? size?
View Replies !
View Related
Printing.....
I have a Canon i250 Printer and would like to print my photos onto Kodak Glossy Photo Paper but it says on the packet only for injet printers and my printer is Bubblejet. So would i be able to use that paper? Also i found some photo paper around the house but it is only for Hewlett Packard printers but i tried it in my Canon printer and when it comes out there is so blobs its hard to explain like there is dots with white around it is this because i am using the wrong paper?
View Replies !
View Related
Printing In CS4
I have just started using CS4, having upgraded from CS2. When I go to print in the print dialog box and go to the Printer Profiles box I am unable to see or select my paper profiles for my Epson 2200 and R300 printers. There is a large number of profiles, primarily various color spaces, but only one paper profile for my Epson 2200. There also isn't any arrow or other way to scroll through the display to see the missing paper profiles. All of the missing profiles are the standard paper profiles provided by Epson either with the printers or from their website. Do I need to reinstall these profiles in some way in CS4 or is there something else I should be doing to be able to access these profiles?
View Replies !
View Related
Printing In CS4
In CS3 you could print multiple images on a sheet like a photo studio by going to File-Automate-Print Package and in CS4 that option isn't there and I can't find any information on it.
View Replies !
View Related
Printing
i wanna do a stencil, A4 is to small, and my printer is only general a4 size, is there a way on photoshop that you can perhaps use combined sheets of A4 to creat a larger image or does it all have to be done manually??
View Replies !
View Related
CS3 Printing
Tried to print a 10ft panoramic landscape with CS3 on an Epson 1290 with disastrous results. Only prints about 4ft then aborts. Worse still what it did manage to print was 5ft of the the panorama compressed into that 4ft, the width had been compressed by my assessment as much as 15/20%. Previously had no problems with CS2 so I have had to reinstall CS2 to effectively do all my printing (especially long landscapes). Even gone to the extent of reformatting computer and reinstalling everything from new. So Adobe can you please tell me what good is it or the point in releasing a program that you cannot trust to print? I don't trust Photoshop CS3 to do any of my printing anymore, not even A4 or A3 sizes.
View Replies !
View Related
Printing
I use photo shop for everything on our company, from designing websites and multimedia screens to art that will get printed. The company uses a SAVIN C3535 for our printed material, and it used to get us really good print quality...until now. When I print stuff directly from Photo shop it creates a weird "cutout" effect on the pictures (people and logos mostly) and creates like a black "noise" surrounding any black text in my art. Color text and shapes print out fine. Anything with tones looks bad. If I send the same file to print to different printer, it looks awesome! Obviously it is the printer...Any suggestions on what I can do to fix this? i already contacted the printers' tech support, but they haven't been able to fix it (they keep blaming photo shop)
View Replies !
View Related
CS3 Printing @ 500% In...
This is with resample off, so the final product will be printed at 200ppi. As part of our (forensic) workflow, we print images at 500%. There are different ways of doing this, but some people in the office specify this in the Print Preview Pane, whereas I do it directly to the image in PS before going to print. After switching to CS3 from CS, it was noticed that 500% for a 1000ppi image (physically less than 36mm X 24mm at 1:1) was being limited to a bit less than 400%. An error box would pop up saying the value must be between 0.00% and XXX.XX%... and it would automatically select the maximum in the range. For a 1000ppi original image, the upper range would be around 370%. I tried it with a 2400 ppi image (5MB) and was limited to ~150%. Apparently this is not a specific number, but some sort of resolution-based maximum. The printer used for output doesn't appear to matter as we've tried a couple of different ones. Is there some sort of maximum percent of image size allowed for printing, based on resolution that can be selected in the Print Preview Pane?
View Replies !
View Related
Printing On OS X
I am transitioning from OS 9 to OS X and am running into some problems with printing. I am using a G4 mac DP, 1.25 Mhz. and an Epson Stylus Photo 820. and I'm running both systems on my G4. I had been using PS 7 with OS 9 and printing out pictures without any problems but I recently downloaded the Try out version of Adobe PS CS2 and decided to use it to print out some of the pictures on OS X. In the Print Preview the options were set to let the printer determine colours. When that was OK'd the next print page showed only the printer and the presets which said Standard. The problem I'm having is that the picture takes less than a minute to print and is of poor quaility compared to printing the same picture on OS 9 with PS 7 which takes maybe 2 or 3 minutes. The printer is printing at 300 dpi on OS 9 but i'm not sure what it is printing at on OS X. Not sure how to check that with OS X. Like I said earlier I'm not that familiar with OS X yet.
View Replies !
View Related
PPI Vs DPI And Printing
if I understand PPI and DPI correctly. PPI dtermines the actual reoslution of the picture and DPI really determines how much ink the printer will spray per inch as it prints out. So I guess I would like to know if anyone has suggestiosn to these three questions. 1. When scanning an image in, does DPI Actually refer to PPI? If so, what DPI/PPI shoudl I scan at. 2. In photoshop cs3 does the "Pixel Demenssions" section refer to PPI and the actual DPI section refer to the DPI setting for the printer? 3. What would be the best PPI and DPI settings for printing out the 3foot by 2foot poster?
View Replies !
View Related
Printing In Lab...
I have a document thats currently in CYMK color mode, and I'm having difficulty finding satisfactory colors. I was advised elsewhere to abandon CYMK. I therefore want to convert my image into to LAB color mode. I've read that converting from one color mode to another can cause layers to look funny, however I need to retain some of my layers... Do you guys typically have problems with this? In retrospect I should have STARTED in Lab... Seems that converting from CYMK to LAB wouldn't be as problematic as converting from LAB to CYMK... The key question is this: will my printer (Epson R800) even be able to print in LAB mode? I thought yes, or at least closely... because it has much more than CYMK to work with... it has these cartridges: #1 Blue UltraChrome Hi-Gloss Ink Cartridge T054920 #2 Cyan UltraChrome Hi-Gloss Ink Cartridge T054220 #3 Gloss Optimizer UltraChrome Hi-Gloss Cartridge T054020 #4 Magenta UltraChrome Hi-Gloss Ink Cartridge T054320 #5 Matte Black UltraChrome Hi-Gloss Ink Cartridge T054820 #6 Photo Black UltraChrome Hi-Gloss Ink Cartridge T054120 #7 Red UltraChrome Hi-Gloss Ink Cartridge T054720 #8 Yellow UltraChrome Hi-Gloss Ink Cartridge Finally, in the print screen menu should I be "letting photoshop manage colors" or letting "printer manage colors"? Do you guys have any other tips on how to tweak printer/photoshop settings/preferences to maximize the accuracy of my colors? Would I possibly be better off just using RGB?
View Replies !
View Related
Printing In CS
Im having a rather simple problem but of course with Photoshop nothing is simple.. I am wondering how to print a multiple page document, my printer will print odd # pages as the front and even # pages on the back side... so pretty much I just need to know how to print two documents at once on photoshop?
View Replies !
View Related
Printing
I have been assigned to make a DVD cover, and I am just wondering what would be the best printing options. I'm wondering what kind of paper would be best, any sizes, files, resolution, the works... Haven't really done this so I'm just a little confused.
View Replies !
View Related
Printing DPI & PPI
I'm making a billboard ad for a friend using CS2. The dimensions are around 14'x6'. The printing company hasn't been much help for me. They usually print basic vector graphics and they don't worry much about distortion. The most they could tell me was that they print at 150 DPI and that I can make my image at half size and they'll blow it up.. I'm very worried about distortion as it is an elaborate pixel based graphic. However, I'm having much trouble working at this huge resolution. Major disk errors and massive loading times between tasks (even with 200gb free disk space and 4gb ram). So, I'm wondering is there any lower resolution I can work at without losing quality here? The printing company hasn't been very helpful here, and I'm having trouble avoiding distortion even in photoshop alone at this rediculous resolution. Thanks if you can offer any advice here, I just feel as if I'm making it harder for myself than it should be. ps I know how to work around the disk scratch errors,
View Replies !
View Related
Printing Metadata
1-Is there any way Metadata seen via PS-2/Adobe Bridge/Metadata tab can be addded to the system clipboard, or copy/paste for hardcopy printing or web report needs? 2- It seems that metadata can be entered only via the Adobe Bridge/Metadata/IPTC Core section, and for jpeg formats only. Is this correct?
View Replies !
View Related
Dark Printing
When I try to print one of my pic (tried different color sheme), the pic is always a bit darker. does it have something to do with photoshop, or the fact that I have cheap printer?
View Replies !
View Related
Resizing For Printing
I am trying to resize my digital photos to the normal 4x6 inches for printing, but when I enter the parameters to resize, either the width or height automatically changes and I can't get it to 4x6.
View Replies !
View Related
Printing Green
I am running windows xp and photoshop cs. I save my work as a JPG and haven't had any printing problems until now. When I print now it prints a solid green sheet. I can see the work I did under the green,
View Replies !
View Related
Printing Photographs
I have an Epson 2200, Photoshop CS2, monitor calibrated with Spyder PRO, using epson profiles to print on a given media, followed the directions on www.computer-darkroom.com. My prints aren't even clsoe to what I see on the screen. I have no idea what else to try. Colors are completly washed out and the print is significantly darker, making the shadow areas loose their details.
View Replies !
View Related
Quality Printing
i don't know if PSG covers this, but how can i print the quality of what i see in on my screen. (actually this is my moms prob.) i only do the photo retouching for her. the prints doesn't match the qualty on screen. on screen, it looks better.
View Replies !
View Related
|
TRACKER
